N70_RM-84_dp_v51.0_SW5.0609.2.0.1_APAC [Archive]

View Full Version : N70_RM-84_dp_v51.0_SW5.0609.2.0.1_APAC

UFS-3â

11th April 2006, 10:51

New download link

MCU-[Only registered and activated users can see links]

PPM-[Only registered and activated users can see links]

UFS-3â

12th April 2006, 11:21

RM-84 Phone Data Package APAC v5.0
========================================

Important!
-----------------------------------------

*NOTE Phoenix Service Software 2005.20.7.98 (or newer)
and Prommer (FPS-8 or FPS-10) SW (Flash Update package 3.29.002 or newer).
Please read the flashing guide related to this release!

**NOTE At least 40Mb of SRAM required in the FPS8-prommer!

***NOTE Close Phoenix before starting uninstallation or installation of Data Package.

Software version
-----------------------------------------
- APE SW 5.0609.2.0.1

Requirements
-----------------------------------------
- Phoenix Service Software 2005.20.7.98 (or newer)
- Flash Update package 3.29.002 (or newer)
- FPS8 or FPS10 prommer or USB cable (DKU-2) for USB flashing

Included files
----------------------------------------
Flash files:
- RM84_50609201.C0 (Combined SOS and Cellmo)

- RM84_50609201_v2.V10 Taiwan
*0524113 Taiwan
*0524114 Taiwan

- RM84_50609201_v2.V11 APAC1
*0524117 APAC1
*0524118 APAC1

- RM84_50609201_v2.V12 APAC2
*0524122 Australia, New Zealand
*0524123 Australia, New Zealand
*0524119 Philippines
*0524120 Philippines
*0524126 Indonesia
*0524127 Indonesia
*0524128 India, Vietnam
*0524129 India, Vietnam

- RM84_50609201_v2.V14 HongKong
*0524115 HongKong
*0524116 HongKong

- RM84_50609201_v2.V15 Thai
*0524124 Thailand
*0524125 Thailand

- RM_84.ini
*options used in flashing
*list of settings that can be saved from customer's phone when
updating software
- readme.txt (this file)
- Product profiles (*.pp)
- rm84.ppu
*User interface configuration file for Product Profile tool
- Label files (*.pcx)

Tuning files:
- autotune_RM-84.ini
*allows user to align product's RF part automatically
- rm_84_tunings.ini
*specifies some TX Power Level tuning targets for RM-84
- rfconf_RM-84.xml

Phoenix components configuration files:
- adcreadings.ini
- audiocontrol.ini
- bluetooth.ini
- camera_control.ini
- factoryset.ini
- ledcontrol.ini
- phoneinfo.ini
- rm_84_als.ini
- rm_84displaytest.ini
- RM_84lbl.ini
- rm84settfiles.ini
- Variant configuration inifiles (05*.ini)

Date: 06-Mar-2006

Copyright ?Nokia Corporation. All rights reserved.

vid

12th April 2006, 12:22

where is the file????

vid

12th April 2006, 12:32

gat it tks.......

william_12345

18th April 2006, 13:18

thank for share......

abdulmueid

30th April 2006, 00:35

There are two N70 firmwares that i see in Software/Firmware forum. They are
N70_RM-84_dp_v51.0_SW5.0609.2.0.1_APAC
RM-84_dp_v6_1_.0_SW5.0609.2.0.1_EURO (N70)

What is the difference between them? What does APAC mean?

mr_faidhi

16th May 2006, 10:55

APAC means Asia Pacific..

goldencoin5

18th May 2006, 01:56

stambde

20th May 2006, 23:25

{*0524128 India, Vietnam
*0524129 India, Vietnam}

what is Vietnam ??

edgar0825

21st May 2006, 08:49

I've succesfully updated my N70 phone. But when i change themes and go back to the main menu. It take a while unlike before. Did i do something wrong on updating or the new version is really like that? thanks in advance

whma11

22nd May 2006, 10:48

I had the same problem since sw verson 2. I think it is a bug.

Haris

24th May 2006, 18:59

Can some1 please upload it somewhr else ... i hav been try since last 2 days and the download breaks in between the data transfer and cannot be resumed.

Thanks in advance.

Haris

26th May 2006, 10:47

Please check the link ... it aint workin on my side ... some1 upload it on megaupload or rapidshare if u guyz can ... would really appreciate it.

UFS-3â

26th May 2006, 13:01

thanks for the info, the file have been removed by uploader

i've try to upload to rapidshare

mos2514

5th June 2006, 15:57

thank for share......best re

Haris

9th June 2006, 09:03

well i upgraded my firmware to v5 but its a lil buggy ... alot of times i see some chinese type fonts ... its pretty strange!! should i re-flash it ??

mr_faidhi

9th June 2006, 18:08

well i upgraded my firmware to v5 but its a lil buggy ... alot of times i see some chinese type fonts ... its pretty strange!! should i re-flash it ??
yerp.. same as me..
then i reflash it using EURO version, the chinese fonts are gone!
in the Music Player, the chinese font change to 'A Proccesser'.

hh929

12th June 2006, 20:24

1. I wan version that can support chinese. APAC or EURO?
2. Does this version (N70_RM-84_dp_v51.0_SW5.0609.2.0.1_APAC) support chinese?
3. Before flashing, do I need to backup my current phone version software in case something goes wrong?
4. How do I know my current version is APAC or EURO?

TQQQQ

Toink

13th June 2006, 15:57

fazrul008

16th June 2006, 19:35

I have tried to update my firmware..it works..using APAC version. But after this..the problem is the ringtone cant play..same as the music player i cant played..the sound not working.

i try download from support.nokia.com and i download the patch..now my phone work 100% OK.

--------------------------------------------------------------------------
Nokia N70 Ring Tone patch file
Nokia_N70_patch.SIS
7-Dec-2005 | 2.2 KB | English

Sometimes your phone might not ring or vibrate when a call is received. There are a few reasons why this might occur:
If you have deleted your ring tone file or changed your MMC card, the phone may not be able to find the ring tone file and therefore cannot play it. Please ensure that your selected ring tone file still exists on the phone or the MMC card.

Complex ring tones (MIDI, AAC, MP3 or WAV files) can sometimes take a long time to load and play. Occasionally when this happens the phone uses a default ring tone setting which may be missing. To ensure this default ring tone is present you can download this patch file and then transfer and install it on your phone. This patch is recommended even if you have not experienced any problem with the ring tone. If your phone shows a security notification when you are installing the file, please ignore it and continue with the installation.

fazrul008

16th June 2006, 19:41

yerp.. same as me..
then i reflash it using EURO version, the chinese fonts are gone!
in the Music Player, the chinese font change to 'A Proccesser'.

I tried to update APAC version on Indonesia / Malaysia Language selection.the chinese fonts are gone!
in the Music Player, the chinese font change to 'A Proccessar'.

Doyle85

17th June 2006, 19:27

how do i reflash this thing?? i really dun understand.. can someone in here guide me in this plzzzZZ...:prayer: :prayer:

edgar0825

22nd June 2006, 11:51

achai82

23rd June 2006, 21:02

search the site on the procedure. the EURO version is much much more stable compared to APAC which is buggy.

I flash before using the APAC version but i didnt like it. So, i reflash again and thank god my N70 becomes much faster.

what are the differences between APAC & EURO version. Is it ok for me to use EURO version while im in brunei? What are the consequnces?

j1e2r3r4y5

24th June 2006, 20:36

what are the differences between APAC & EURO version. Is it ok for me to use EURO version while im in brunei? What are the consequnces?

heyyy achai82 i'm also from brunei tooo :supz: :supz: :supz:

edgar0825

26th June 2006, 04:56

The only difference is the language pack embeded on the versions. APAC has languages like pilipino, malaysian etc while EURO has european languages. Its ok to use EURO version if you like to use english as your cellphone language.

Repute please. Hope i have help lighten you.

nooxcorp

30th June 2006, 07:11

I flash before using the APAC version but i didnt like it. So, i reflash again and thank god my N70 becomes much faster.

you mean there will be no problem if i reflash my phone with EURO if im currently using APAC version?? coz im planning to upgrade my phone with the latest firmware which is EURO. please help kabayan :)

achai82

1st July 2006, 21:01

search the site on the procedure. the EURO version is much much more stable compared to APAC which is buggy.

I flash before using the APAC version but i didnt like it. So, i reflash again and thank god my N70 becomes much faster.

i've tried to flash with EURO. but when i click start, the error came out. What's the problem & what must i do now? In this case, i shud reinstall phoenix coz i've turn off my pc. is it any other way to make it easier??

hyeee j1e2r3r4y5...