MTBox NK v1.22 release.
On single asic BB5 it should:
* scan products substantially faster.
* support product profile tunning ( ProductProfile in 'Automatic actions')
* added “Force ContentConvertion to 128” ( in AutomaticActions) - for faster repair of damaged 6280 phones for example.

N80 – bugfix to automatically select file for userdisk flashing.

In PhoneInfo:
added code to properly display ESN when CDMA phone is attached to box.

good update but still need putom to stop any running operation.

good update and when MT-box can unlock BB5 phone
BR.
DATAPHONE

When I use the MT box this error message comes Phone is in: Phone is not responding, power on phone! Why is that? first it work properly and now the box don’t work at all and it not supporting any nokia phones now pls help me soon

I got a Nokia 6280 and 6630 to flash and unlock.

good update but still need putom to stop any running operation.
But where is the exe file for download?

thank you good update

Good for BB5 but not workin' with Nokia 1100
anybody in this forum...can tell me why?





:iphonepost:

Good for BB5 but not workin' with Nokia 1100
anybody in this forum...can tell me why?

maybe your 1100 cable not good,
100% working with 1100

maybe your 1100 cable not good,
100% working with 1100

Coz Nokia 2300 n 1100 use the cable...work good on 2300 but 1100 not
pliz give me solution n sorry for my bad english:ilove:

got to unlock nokia 6680 with mt box but it wont do it it shows "sim unlock fail" how can i unlock this phone

got to unlock nokia 6680 with mt box but it wont do it it shows "sim unlock fail" how can i unlock this phone


for your inforamtion 6680 is bb5 which cannot be unlock at this moment

BugFixes:


bugfixed reading of large PM files - filed larger then 4K. Such as 134:01
New Features:

Added support for USB flashing of 'Single ASIC BB5' phones. Tested successfully on 3250, 6131/6133,6270, 6234. Known not to work on 6280( we think it is nokia bug).

How to flash over USB: In the top-right section of MTB_NK interface, next to PhoneMode combo, is a button saying USB. When this button is in down position, MTB will use the USB cable to communicate to phones (serial), and flash them. MTB support both DeadPhoneFlashing( USB_BOOT_ROM) and ADL flashing ( phone is on, and connected to PC when flashing starts.). If conversion to 128K page size is needed MTB will do it automatically.

how to unlock 1110i???

dont know yet trying to find out how????

Where do I get this v1.23 installer???
I have logged into www.mt-box.org since it release, but never seen any updated there :(

Where do I get this v1.23 installer???
I have logged into www.mt-box.org since it release, but never seen any updated there :(
you can get it here http://www.griffinteam.net/gt_net/attachments/packages/mtb_nk_setup123.exe

How to using USB option on MTB NK v1.23?

why i can;t detect phone at all??? can same1 teach me how to install or use?? there alway error phone is in fail to boot power on the phone ...

14.11.2006 - MT Box Nokia - MTB NK v1.25


mtb_nk version 1.25 release notes:

Improvements:
* Improved support for USB flashing of BB5 phones.Added USB flashing for RAP+APE based phones. This version should support USB flashing for all BB5 phones.
* Support for retry flash over USB. In case that something goes wrong and phone is accidentally disconnected from PC while flashing:
without removing phone battery connect to PC, restart MTB_NK, choose manually phone model, click USB mode and flash. Application should successfully flash phone.
Support for automatic backup of simlock field, and RF settings, when flashing BB5 phones. MTB_NK will automatically make PM file before flashing phone.
Bugfixes:
DCT3 flashing.
PM Reading ( application stuck when a field is forbidden for reading).

14.11.2006 - Asic 11 and DCT4 plus realised for MT box Nokia under GT Server


Supported models:

- Nokia 1112
- Nokia 2310
- Nokia 2610

To use it you need to have Griffin server account.
For all who have it already need to edit Griffin.ini
Griffin.ini you can find in c:\Program Files\GriffinTeam\MT-Box\
Open Griffin.ini in any text editor and enter your Griffin server login details

For example:



[interface_options]
s_user=Griffin_server_user_name
s_pass=Griffin_server_password
extras=1
extras_index=4
RPL_208=0
LogToFile=1
FlsaDisplayDetail=0
ProductProfile=0
GprsSettings=0
NvdAccess=0
AutoUnlock=0
UpdateProductCode=0
ResetUserCode=0
NvdNvd=0
SkipBluetooth=0
FactoryDefaultSettings=1


Save edited ini file, and start MTB_NK_DCT4PLUS_ASIC11.exe
Connect phone using FBUS cable and press unlock
Internet connection required
Please allows connection if any firewall

This is real time unlock and operation take only fiwe seconds
The phone will be unlocked like from factory

This operation wil take only 1 credit from your Griffin server account

BR GT

this dont work for me, error with 1112, any ideas?

got to unlock nokia 6680 with mt box but it wont do it it shows "sim unlock fail" how can i unlock this phone

you CAN'T unlock 6280, this is BB5 phone!!!! if you do it, you became a millionare!!! :)))

this dont work for me, error with 1112, any ideas?

do you have an account on Griffin Server? It doesn't work without it

of course i have griffin account, but good thinking thanks, I got it to work on another pc, 1112 unlocked ok.

MTB_NK_v1.25.4 Release

6288 usb flashing added


NOTE:Nokia_Connectivity_Cable_Driver_rel_6_82_4_en g.msi
Please download the driver at support also the exe and torrent

MTB NK v1.25.5 realized

Asic 11 and DCT4 plus unlock bug fixed, try and post results


Phone is in: Test mode
Imei: 010997004532797
Info OK
USING ALREADY COMPUTED DATA
V 5.03/04-21-06/RH-92 (c) NMP
IMEI: 010997004532797
Operator: 0010100000000000
Profile bits: 0000000000010002
Sim Status: Not locked
FINISHED OK

MTB NK v1.25.6 realized

- Added server CACHE. If unlock of DCT4_PLUS fails, retry to unlock on same phone will use computed data instead of connecting to server.
- Some bugx fixed

08.01.2007 - MTB_NK 1.27 Release

- N91/N71 flashing bug fixed
- 8800 Sirocco edition – unlock support FREE ( no need to connect server)


Enjoy
GT

15.01.2007 - MTB NK 1.28 SX4 Server emulation




Release notes:




Bugfixes:
BB5 RPL Write – added 20seconds delay between certificate write, and serial sending of simlock and SuperDongle data. NOTE – in order for simlock sending to

succeed, phone should power on in LocalMode. If it doesn't correct your cable.

In case that phone has some problem with powering on in LocalMode, connect phone, manually power it on in LocalMode, and then choose write RPL Again, MT will

detect that Phone has valid Imei, and offer choice to skip certificate sending and do the serial sending only.

New features:
BB5 ASKs created with MTBox can be computed through GTServer. For more information see the release notes of GTSAccess 1.34 .
Added SX4 Authorization for PMM write on BB5 phones. BB5 phones have protection for writing RF(1 ) and Energy(309, 0x135 in hex) settings in eeprom. NOT

HAVING THOSE SETTINGS IN PHONE, IS KNOWN AS 'CONTACT RETAILER PROBLEM', OR 'SECURITY ERROR' IN SELF TEST. In order to write those settings phone requires an

authorization that only SX4 smart card can perform. As those cards are hard to get, we've added server support for this authorization. To authorize, connect

BB5 phone, and power it on. Press SX4 button ( located in Eeprom control page). If you have SX4 card connected to PC, MT will use it to compute the

authorization password and send it to phone. If you don't have card, MT will connect to server to compute authorization password. In order to connect to

server, you must have 'saved' valid account information for GT Server, and the account must have at least 1 credit left. The computation is FREE, your

account will not be charged. Because the authorization procedure must complete in very short time, if you have bad internet connection, you may have to try a

few times, before it is successful. Onece you've authorized phone, you may write PM settings to phone. If phone is restarted, you need to authorize again.

To restore PM of phone, after eeprom is eerased:
1.Connect phone.
2.Make sure it has serial communication ( recommend to see it responds to phone info in local mode).
3.Load the PM file ( load file, in Eeprom controls page).
4.Mark Section( resource) 308 (0x134) and press Write Selected.
5.Restart phone. Either disconnect and reconnect phone to MT, or change mode to Test.
6.Press SX4 button, and wait for it to display that authorization was successful.
7.Press Write All button.

If no error are report, then you've successful restored the PM of the phone.



With the support for PM authorization we've ensured that our clients are able to actually service BB5 phones. Now you can make complete backup of IMEI and

EEProm, change flash and restore IMEI and Eeprom with no additional charge for you.
WARNING: many of you will try to downgrade phones, by erasing the Eeprom and then restoring after phone is flashed with lower version. There is significant

risk, that phone will not accept simlock data ( 308, in hex 0x134) from higher version. So you still risk to end with damaged phone. That is why we recommend

to avoid downgrading. If this happens you have two options: restore phone back to high version, and then write PM, or compute RPL and write RPL to phone. So

if you really need to downgrade some BB5, you may have to compute RPL for it!

For those who wish to make full erase of BB5 phones, we've created 4 files.

BB5Erase_8MBrap.bin – fully erase first 8MB of RAP3 flash.
BB5Erase_16MBrap.bin - fully erase first 16MB of RAP3 flash.
BB5Erase_EE_8MBrap.bin – erase only eeprom located at the end of 8th MB
BB5Erase_EE_16MBrap.bin – erase only eeprom located at the end of first 16th MB.


!!!! VERY IMPORTANT !!!!

ALL WE KNOW FOR PROBLEMS WHIT BAD QUALITY SERVICE CABLES.

ON THIS CASE IS CRITICAL PHONE TO BE IN LOCAL OR TEST MODE after RESTART from certificate write.

so please check this link:

http://forum.gsmhosting.com/vbb/show...58&postcount=6

Problem is also 10 to 8 pin adapter cable connectors have very poor contact of GND and this come a big problem.

(we already start producing new type adapter cable)

Some times is need to push hard RG45 to adapter to be able to have any communication.

So if you not see this:

Simlock send - SUCCESSFULL!!!
SuperDongle send - SUCCESSFULL!!!

Simple check YOUR cable connection befor make any posting on forums.

BR GT

15.01.2007 - GTSAccess 1.34 BB5 ASK/RPL SERVICE





Release notes of GTSAccess 1.34

Run GriffinSAccess.exe

select login method : USER NAME

ENTER YOUR USER NAME AND PASS FOR GT SERVER

click on CheckAccount

very important is to have this 2 services:


NK_BB5_PM_AUTH 0 credits
NK_BB5_CERT_REST 40 credits

Is possible some special (limited) accounts to not have this 2 services

How to use GTSAccess 1.34 for BB5 ASK/RPL

Click on send file(s) select ask file which was read with MT box( we do not support other product formats)
you will see this:


Server IP: 213.16.42.125, Box_SNyour user name )
Connect... Resp: o/0110/hello there
Login...OK, available count xxx;

busy, waiting...
e/0/accepted;

accepted ; means your file is good and is recieved for calculation from server

So now neade to wait from 1 hr to 24 hr ( usual time 15 mins )

If for some reason the RPL file is not computed within 72h, the ASK will be deleted from server,and the credits will be restored to the account. This also means that maximum calculation time for RPLs is 72h.
It should be around 20 min when normal operation.


How to get your rpl:
Again need to click on send file select same file and you can see 2 variants:

1.

busy, waiting...
e/0/pending;

pending; means your ask file is still under calculation and need to check later

2.
busy, waiting...
Data Received!
File <C:\xxxfolder\35xx0300x4xx0x7.RPL> Created!

So this is your RPL file now can use MTbox to write in phone.

Please don't send ASK files from EMPTY BOARDS. They will not be computed.




!!!! VERY IMPORTANT !!!!

ALL WE KNOW FOR PROBLEMS WHIT BAD QUALITY SERVICE CABLES.

ON THIS CASE IS CRITICAL PHONE TO BE IN LOCAL OR TEST MODE after RESTART from certificate write.

so please check this link:

http://forum.gsmhosting.com/vbb/show...58&postcount=6

Problem is also 10 to 8 pin adapter cable connectors have very poor contact of GND and this come a big problem.

(we already start producing new type adapter cable)

Some times is need to push hard RG45 to adapter to be able to have any communication.

So if you not see this:

Simlock send - SUCCESSFULL!!!
SuperDongle send - SUCCESSFULL!!!

Simple check YOUR cable connection befor make any posting on forums.


BRGT

23.02.2007 - MT Box Nokia - MTB NK v1.29.5 realised


New features:

- New button 'BB5 Downgrade' – Button is located in the right-bottom corner of the application. It destroys the version control field, as described by Dejan.

How to use it:

Select flash files for the version you wish to flash the phone to.
Press 'BB5 Downgrade'.
Application will erase field, and flash phone.
No additional actions needed.
Tested on 6131, 6280.
We recommend that you backup the security field before that (0x134:1).

- Extended information, when bootinfo fails for BB5 phone. This should help diagnose what is wrong with BB5 phones.

- Improved Certificate Backup/Restore.
- Improved RPL writing for BB5 phones.
- Extended information on what certificates are read/written to phone.

- Added check whether EXE is used with correct installation. Some users copy exes to very old installations, and then have problems using the program. So this exe checks griffin.ini to see if the latest installation was used.
To hack the check, open griffin.ini, and make under '[interface_options]' write
'installation=mtb_nk_setup1_29_5.exe'. This hack is needed if you insist on NOT using the installations we publish.
- Bugfix: Autosave the checkboxes for 'BB5 308 Backup', 'BB5 IMEI Backup'

Temporary download link:
MTB NK 1.29.5 setup.exe (http://www.griffinteam.net/gt_net/attachments/packages/mtb_nk_setup1_29_5.exe)

13.04.2007 - MT Box Nokia - MTB NK 1.30 beta

Whats new:

- All DCT4+ & Asic 11 All version Unlock Fixed
- Flashing Bugs Fixed

MTB_NK 1.32 Release:

Bugfix on USB flashing for N95

FBUS flashing: Introducing data transfer usign TX2 line. Flash loaders 7x from Nokia,
have hardcoded option to use TX2 line for sending flash data. In order to use this,
you will need to modify your cables, and connect PIN2 from 10pin RJ of MT box to Rx2 on phone.
If u wish to use old flash loaders ( 6.50), u can check Off UseTx2Line( in automatic actions) and use your old cables.


Added button to implement old rap codes generation that was released by Dejan, button is DJ_BB5.


Because we have problem with hosting provider please download new version from temporary place.
New support area is under development and will be available for maximum 7 days.
Please accept our apologies for caused problems.


MTB NK 1.32 setup (http://www.gtibox.net/dnld/mtb_nk_setup1_32.exe)
N95 full cable scheme (http://www.gtibox.net/dnld/MTBOX_N95-BOXCableFull.pdf)

07.06.2007 - MT Box PRO - server side update


New phone models and software versions added to MT box PRO server side.


3110c
[V_04.91_03-04-07_RM-237_(c)_Nokia.]

5200
[V_04.71_28-02-07_RM-174_(c)_Nokia.]

5200B
[V_03.70_22-09-06_RM-181_(c)_Nokia.]
[V_03.92_13-10-06_RM-181_(c)_Nokia.]
[V_04.71_28-02-07_RM-181_(c)_Nokia.]

5300B
[V_03.92_13-10-06_RM-147_(c)_Nokia.]
[V_04.71_28-02-07_RM-147_(c)_Nokia.] - NOT TESTED

6126
[V_04.24_04-07-06_RM-126_(c)_Nokia.] - NOT TESTED
[V_05.61_14-12-06_RM-126_(c)_Nokia.] - NOT TESTED

6133
[V_04.24_04-07-06_RM-126_(c)_Nokia.] - NOT TESTED
[V_05.61_14-12-06_RM-126_(c)_Nokia.] - NOT TESTED

6136
[V_03.71.2_12-09-06_RM-199_(c)_Nokia.]

6233
[V_04.54_01-08-06_RM-145_(c)_Nokia]

6234
[V_04.54_01-08-06_RM-123_(c)_Nokia]

6280/6288
[V_06.43_30-03-07_RM-78_(c)_Nokia]

6300
[V_04.71_28-02-07_RM-217_(c)_Nokia.]
[V_04.71_28-02-07_RM-222_(c)_Nokia.]

7373
[V_04.70_24-01-07_RM-209_(c)_Nokia.]

E60
[V_1.0533.47.12_28-03-06_RM-49_(c)_Nokia.]

N91
[V_w33_06w24v4.13-09-06_RM-43_(c)_Nokia.] - MCU: RM43_V2.10.013.core


If you use MTB NK 1.32 already dont need to make any changes, all changes is on server side.

MT box Pro user manual v2.2 (http://www.softmobile.co.yu/test/GT_BB5_unlock_user_manual%20v2.2.pdf)

BR

11.09.2007 - MT Box Nokia v1.37


Whats new:


Bugfixes:

- FBUS flashing for E61i
- USB flashing for N70 and similar
- DCT4 unlocking when simlock is invalid

Changes: changed the way downgradeBB5 is done

Download:

http://www.griffinteam.net/gt_net/attachments/packages/MTB_NK1_37.rar

08.10.2007 - MT Box Nokia - MTB NK 1.38B

Whats new:

Release notes MTB_NK 1.38B

- fixed rpl writing N95
- fixed 6300 flashing
- fixed E61 flashing


Download:

MTB NK 1.38B (http://www.griffinteam.net/gt_net/attachments/packages/MTB_NK1_38B.EXE)

Please note:

Before install MTB NK 1.38B you need to have installed MTB NK 1.36 setup (http://www.griffinteam.net/gt_net/attachments/packages/mtb_nk_setup1_36-fixed.exe)

16.10.2007 - MT Box Nokia - MTB NK 1.39a

Whats new:

Release notes MTB_NK 1.39a

- Added flashing if 6500,6500s,5610

Download:

MTB NK 1.39a (http://www.griffinteam.net/gt_net/attachments/packages/MTB_NK1_39a.exe)

29.10.2007 - MT Box Nokia - MTB NK 1.40B

Whats new:

Release notes MTB_NK 1.40B

- fixed slaw DCT4+,asic11 phones like 2760 , 2630
- fixed empty gallery after USB flash of 6500S and 6500C


Please note:

NOT fixed at this moment FBUS flashing of 6500C

Download:

MTB NK 1.40B (http://www.griffinteam.net/gt_net/attachments/packages/MTB_NK1_40b.exe)

Please note:

Before install MTB NK 1.40B you need to have installed MTB NK 1.36 setup (http://www.griffinteam.net/gt_net/attachments/packages/mtb_nk_setup1_36-fixed.exe)