View Full Version : SarasSoft Box Tools



UFS-3‚
6th June 2006, 06:29
here i'll upload some tools for sarassoft box for easy user find it.

so please don't open a new thread find the tools.

any tools with saras box please request here, for hwk tools please post at HWK section.

UFS-3‚
6th June 2006, 06:34
UFS3 Tools v2.69 beta

-update/restore box firmware to v2.6
-change box SN

UFS-3‚
6th June 2006, 06:44
-update/restore box firmware

UFS-3‚
6th June 2006, 13:42
UFS Box Description Editor by neb v1.0
-edit ufs box description

UFS-3‚
6th June 2006, 13:48
UFS Activation String Calc v3.5

UFS-3‚
6th June 2006, 13:56
Nokia Cable List

UFS-3‚
6th June 2006, 14:00
UFx Diagnostic -Burn In Tools by SarasSoft v2.0_HL

UFS-3‚
6th June 2006, 14:06
MProg- Multi Device EEPROM Programmer v2.3

UFS-3‚
6th June 2006, 14:09
Twister SN Changer v3.0
-change box SN
-update/restore box firware

UFS-3‚
7th June 2006, 04:59
Twister Activator ver 2.67
-String calculator
-Convert REQ to FBI

tarun_chawla
7th June 2006, 10:56
many tools here but still no proper solution for BOX AUTHORISATION ERROR :32

mig2003
8th June 2006, 06:50
many tools here but still no proper solution for BOX AUTHORISATION ERROR :32
Here help you.......

sajib_ngag
8th June 2006, 15:47
UFx Diagnostic -Burn In Tools by SarasSoft v2.0_HL



dear brother
when i start this softwer then shaw a erore masage bad enveronment:200 on my pc. what can i do it>:???:

muskangul
9th June 2006, 22:42
i have power flasher i want to update its firmware
plz help me to do that
how can i do that
plz

UFS-3‚
10th June 2006, 04:44
if your box firmware is v2.6, no need update...

Jysmc
10th June 2006, 09:33
dear brother
when i start this softwer then shaw a erore masage bad enveronment:200 on my pc. what can i do it>:???:

hi

try downgrade ufs driver to Versions: Ufs2xx.dll 2.0.11.1, Ufs2xx.sys 1.6.6.1
then start again the software and post results

BR

damiondeuce
15th June 2006, 21:46
I have a problem with my n-box.(UFS2) I am able to flash phones but when I flash them it does not repair the problem even though the phone just requires flashing. When I try to flash the mcu / ppm area of a 3310 it starts flashing the eeprom area of the phone. I've tried all the software available here and nothing seems to work, then again I don't know whats wrong. I've used various drivers and UFS software suites and it still does the same thing. Does anyone have any advice on how to solve my problem. PLZ, frustrated.

HPDebug
15th June 2006, 23:27
Now patcher for HWK is uploaded by MrHaWeKa.
Check it

HPDebug
15th June 2006, 23:34
I have a problem with my n-box.(UFS2) I am able to flash phones but when I flash them it does not repair the problem even though the phone just requires flashing. When I try to flash the mcu / ppm area of a 3310 it starts flashing the eeprom area of the phone. I've tried all the software available here and nothing seems to work, then again I don't know whats wrong. I've used various drivers and UFS software suites and it still does the same thing. Does anyone have any advice on how to solve my problem. PLZ, frustrated.


For DCT3 phone, the best flasher ever is DejanFlasher.
Bettr than sarasbox. just use serial cable connect to your PC.

Flashing DCT4, WD2 ok? If ok left it alone, buy the serial cable, use Dejan software.

jicho24
23rd June 2006, 00:57
hi i new in this forum i need please actualitation sarasoft i have version 1.3 i needed new version.

Tanks for your help

HPDebug
23rd June 2006, 03:56
hi i new in this forum i need please actualitation sarasoft i have version 1.3 i needed new version.

Tanks for your help
Use search engine for UFS_Suite_Setup_v3.00.000.exe.
I have forgot where I got this setup. Not from official site.
I'll tell if I remember.
sory;)


ps.

muskangul
23rd June 2006, 23:59
Dear i need firmware of my powerflasher box
dealer said i dont need any update
pz check and tell abt latest available firmware.........not software
plz

UFS-3‚
25th June 2006, 12:50
Dear i need firmware of my powerflasher box
dealer said i dont need any update
pz check and tell abt latest available firmware.........not software
plz

after you connect your box if show v2.6 you don't need update your box.

jicho24
26th June 2006, 17:22
Hello, tanks for your help, i need write more the 20 post in this forum for download ultimate version of sarasoft??..

saksham
26th June 2006, 18:57
HI bro i need to flash my p910i on my own plz plz i need ur help brothers. I dnt know much of it so I wanna ask u what all things i need to have for flashing my p910i. is there any risk involved. Plz friends i have lot of hope in u people plz dnt turn down my expectation
:iphonepost:
Help others so they can help U

UFS-3‚
27th June 2006, 05:46
Hello, tanks for your help, i need write more the 20 post in this forum for download ultimate version of sarasoft??..


no this rule now:lol:

but remember don't spam in forum cos will be banned

lieu
8th July 2006, 06:00
did anyone got hwk version newer than 1.4b, pls post it here tq

UFS-3‚
10th July 2006, 08:01
did anyone got hwk version newer than 1.4b, pls post it here tq


the latest dctx v2.01 already in forum

try to download the ufs suite v3.01

simran03r
10th July 2006, 21:10
when flashing wd2 phones iam getting reply stream read error ,how can i solve this problem

o2phone
11th July 2006, 20:14
thank youuuu somuch

muskangul
11th July 2006, 21:41
Dear Friends
my power flasher was showing UFS 3 in status bar of dctx tools early
but i downloaded some tools from the iphone and from these tolls i have pressed update button
noe it shows ufs 2
what should i do?

learnig
19th July 2006, 15:27
i'm visit [Only registered and activated users can see links]
i want to download up-grade file for my ufs3(tornado) program,
but i don't know how to register?
bcause it need to login.
or where i can get
or how can i up date?
thx guys

muskangul
19th July 2006, 21:25
i'm visit [Only registered and activated users can see links]
i want to download up-grade file for my ufs3(tornado) program,
but i don't know how to register?
bcause it need to login.
or where i can get
or how can i up date?
thx guys
friend
go to [Only registered and activated users can see links] for ur update
and login there with ur id whcih u have given by ur reseller
if u have not one...request ur reseller for id and password.
but mostly it is written on a sticker given with cd box

learnig
20th July 2006, 17:44
friend
go to [Only registered and activated users can see links] for ur update
and login there with ur id whcih u have given by ur reseller
if u have not one...request ur reseller for id and password.
but mostly it is written on a sticker given with cd box

omkhatti
23rd July 2006, 21:15
:ilove: my nokia 1100 mobile was show imie ??????????????? wha cn i do:???:

sajib_ngag
25th July 2006, 10:51
chang the uime ic on your phone 100000000% tested

inder
25th July 2006, 12:25
hereis main software for [ learning ]


Ufs flashing all software old and new single setup



[Only registered and activated users can see links]

charles911
29th July 2006, 12:36
very good software!

gopal_lko
29th July 2006, 21:48
hi,i was flash a nokia 3300a but all prosses is complete include uie seting,full factory setting,and imi is correct but phone is after flash is show contact service .any body have this solution so please tell me what i do

paavalan
30th July 2006, 10:45
Thanks for all Apps

djuken
30th July 2006, 15:15
pls help me to solve my problem.. my computer was reformatted because windows was corrupted... i do not have any back up of my twister box.. i dont know wer can i get a software for my box.. anyone can give me a software for my hardware...??

muskangul
30th July 2006, 22:03
go to [Only registered and activated users can see links]
ad download for the files if u r registered
otherwise search on iphone forum for help

muskangul
30th July 2006, 22:13
hi friends
i m in big problem
my powerflasher was dropped down from my working table of workshop
today when i tried to connect it the only messege (CONNECTING) comes nothing happens more
when i checked it on sarasoft tolls of all type
all softwares only show the serial no of the device nothing more..
when i tried to update it from different toos it shows error in erasing flash...
what should i do
i have chagned usb cables
i have also checked it for board breaking and continuty
plz help meeeeeeeeeeeeeeee

UFS-3‚
31st July 2006, 13:55
UFSx INI Generator v1.0

muskangul
31st July 2006, 21:29
hi friends
i m in big problem
my powerflasher was dropped down from my working table of workshop
today when i tried to connect it the only messege (CONNECTING) comes nothing happens more
when i checked it on sarasoft tolls of all type
all softwares only show the serial no of the device nothing more..
when i tried to update it from different toos it shows error in erasing flash...
what should i do
i have chagned usb cables
i have also checked it for board breaking and continuty
plz help meeeeeeeeeeeeeeee


i have checked flash ic of mine powerflasher on twister it is working on it
but ic of the twister is giving same problem/ error on mine powerflasher (Please wait)


some one help me please
please urgently

gopal_lko
22nd August 2006, 21:15
hi ,
i hope any good and inteligent person is here and he help me .i have very critical problem in nokia 3310 i change coba ic and rf pfo and hagger but network is not ok any time show full network then go out imideatly and any time network not found ,so please i hope any person help me ........................

UFS-3‚
24th August 2006, 09:08
hi ,
i hope any good and inteligent person is here and he help me .i have very critical problem in nokia 3310 i change coba ic and rf pfo and hagger but network is not ok any time show full network then go out imideatly and any time network not found ,so please i hope any person help me ........................


pls post at nokia phones section!

here only for SarasSoft Products

gopal_lko
27th August 2006, 15:04
if your box firmware is v2.6, no need update...
hi,
first why you upgrade your box .you stop this and you install 1.4 version and then you upgrade it by version three .i hope you understand it and injoy all flash phone with new comming mobiles .

intiqab
3rd September 2006, 13:07
Thank you for every one who have posted many tools in this forum.
It is really usefull to everyone.

Bye.
:iphonepost: :ilove:

kindo
3rd September 2006, 18:49
need help, my tornado box cant flash wd2 phones. dct3 n dct4 work well. had try with 2 6600, 1 n-gage n 3 3230. all r same. here is boot logof 6600.

1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,002088C0,St M28W640
Fl1: 0x02000000-0x027FFFFF,002088C0,St M28W640
Fl2: 0x04000000-0x047FFFFF,002088C0,St M28W640
Fl3: 0x06000000-0x067FFFFF,002088C0,St M28W640
Algorithm: w3_st_i.fia, w3_cbusb.fia, Ver: 4.51.0
Algorithm Ok, MSID: 8467107E390875B8C9E2BC9D89
Decoded MSID: 3E4EBAF7-009CEC2D-A8000000
Encoded FAID: 12931031-55F0C72F-61C8AE1A
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:04
Area3: 0x04000000-0x046FFFFF Erased, Time: 00:57
Area4: 0x06000000-0x0673FFFF Erased, Time: 00:57
Area5: 0x047C0000-0x047EFFFF Erased, Time: 00:01
BT MCM (21) Image Found & Skipped
MCU Flashing Completed, Time: 07:26
Erasing: 0x00000000-0x0000FFFF ...
Erasing Error: 10, at: 0x00000000-0x0000FFFF, 940108, Time: 00:00
Process Failed, Repowering Mobile

mr protec
3rd September 2006, 21:45
Great
.........................................
Wbr

UFS-3‚
4th September 2006, 06:00
use latest version

Algorithm: w3_st_i.fia, w3_cbusb.fia, Ver: 4.54.0

kindo
7th September 2006, 04:56
use latest version

Algorithm: w3_st_i.fia, w3_cbusb.fia, Ver: 4.54.0

where can i get this lates Fia's?

UFS-3‚
7th September 2006, 08:44
where can i get this lates Fia's?


get it here:supz:

kindo
7th September 2006, 17:26
@UFS-3a

Thanks for sharing. i will try continue flashing now. i hope this files can help me.
B.R
kindo

jeric
9th September 2006, 05:32
try to connect a charger when flashing or check your cables

kindo
11th September 2006, 06:12
Thanks to all for replies.
i had solve my problem now. what had i done?? i change my mother board, change processor to celeron 1.7Ghz and upgrade psu to 480w.

thanks to all again
b.r
kindo

zawphyo
11th September 2006, 08:17
Pls help me... I try to do with video .. I 've still BOX_AUTH_ERROR : 32 problem.Could u help me

learnig
12th September 2006, 20:08
same problem with my 6600.can anybody hlp me plz??i try flash with dctxbb5 tools v.2.0.1..thx b4..following the rror msg:
1st Boot Ok, WD2, UPP: 1081
2nd Boot Error: 4
Platform: 6, Error Data:
B3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile

or.....
1st Boot Ok, WD2, UPP: 1081
2nd Boot Error: 6
Platform: 6, Error Data:
F3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile

sajib_ngag
13th September 2006, 08:26
flash ic problem.........................

naresh
18th September 2006, 12:36
hello i try to without hwk carck i loss my box serial no and formet any soullation for this

alkaser8
22nd September 2006, 09:47
Thank you for every one who have posted many tools in this forum

tayebinfo
23rd September 2006, 00:41
Very Thanks for all tools

65211355
23rd September 2006, 20:28
same problem with my 6600.can anybody hlp me plz??i try flash with dctxbb5 tools v.2.0.1..thx b4..following the rror msg:
1st Boot Ok, WD2, UPP: 1081
2nd Boot Error: 4
Platform: 6, Error Data:
B3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile

or.....
1st Boot Ok, WD2, UPP: 1081
2nd Boot Error: 6
Platform: 6, Error Data:
F3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile
pls change your upp
or
change ram

guenmn
24th September 2006, 18:00
Hi,

how i can update the firmware from a nokia 6610 with this FW V4.18 07.12.02 NHL-4U
NMP

Thank you

UFS-3‚
25th September 2006, 07:16
do you got sarassoft box? flash with mcu , ppm, cnt

latest version v5.65

Hands0n
8th October 2006, 14:12
Hello to you all.

I need some help with a re-install of a UFSX.com UFS3 box. I had a HDD crash on my PC, reinstalled the USB drivers and N-Box utilities. These are asking for Activation String when I start them up - it has been so long ago that I originally installed these I no longer have the original strings. In fact, I do not remember having to install these originally!!! The box was purchased from a legitimate UK seller, but I get no contact from them at the moment! So need some help from you people if you can.

Is there any way that I can regenerate these Activation Strings? I have tried the UFS_ASCv3.5.exe utility but this (I think) is for the HWK version only - it does not recognise my UFS3 box.

Hope you can help.
Regards

UFS-3‚
9th October 2006, 10:01
it does not recognise my UFS3 box.

have you install the driver?

Hands0n
9th October 2006, 10:30
have you install the driver?

Yes, all the drivers are in. The N-Box utilities see the UFS3 box, but ask for the licence keys which I did not have. I needed something to regenerate the licence keys for that specific serial number of box.

Thanks for your reply - almost at the same time this morning my original seller has come back with a set of keys for me which have worked, so I am out of trouble now. Best to keep these keys safely locked away :D

The utility "UFS_ASCv3.5.exe" did not work for my non-HWK version of the box. There is a 3.0 version of the utility but it requires a file called UFSx.EXE which it was not bundled with [in the zipfile] and which I could not find anywhere.

Alls well that ends well :)

UFS-3‚
23rd October 2006, 12:41
what is your problem with ASCv3.5hwk?

this is just a strings calculator, no matter you got or dont have HWK still can use this...

inside the zip should got
MSVBVM60.DLL (1354kb)
UFS_ASCv3.5 (19kb)
UFSh (46kb)
log (after use you got this file)

shponglize
14th November 2006, 07:55
I have an N-Box purchased here from I-Phone/IPMart. I'm trying to flash my Nokia 3650.
MCU file=NHL83042.7c1
PPM file=NHL83041.732

When I start Ufs_dctxbb5.exe (ver 2.01) I get the following output:

CPU: GenuineIntel, Sp: 5
Platform: Windows NT 5.1 (Build 2600 Service Pack 2)
Versions: Ufs2xx.dll 3.1.6, Ufs2xx.sys 3.1.4
Executive Path:
C:\Program Files\Nokia\Phoenix


when I press connect I get:
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: xxxxxx
Features: 00000001
Licence : True


I uncheck "Autodetect Product"
I uncheck "use INI file settings"
I select Product "NHL-8 (3650)" on the WD2 pane
I press either Check, or Info, I get:
<my phone powers up here to the Nokia Logo>
1st Boot Err: Bad Resp UPP, 03 00 00 72
Rebooting Mobile


Basically whatever I do I get the same Bad Resp.

I know that I have seen this work with this cable and this exact phone in the past, but I do not know what is wrong with it right now. I've tested the continuity of the cable and it's all good. I can see the phone powering up and down during requests, but I cannot get any INFO from the phone. Is this the proper place to get some help getting things set up so that I can flash this phone?

Thank you for your help

UFS-3‚
14th November 2006, 08:32
use default setting, the latest UFS_DCTxBB5 v2.0.3

if you can see nokia logo and you got 1st boot error, it's cable problem. try hold tight the cable when flashing...

shponglize
14th November 2006, 11:34
100% correct that it was a problem with the cable. Unfortunately I had to solder wires directly to the phone to determine this. The adapter cable is of such low quality that it simply would not work. I tried holding it together by hand, but my muscles gave out before the phone could be fully flashed.

When I press check, I now get:
1st Boot Ok, WD2, UPP: 0082
Rebooting Mobile


When I press "Erase FLASH", I get:
1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,00898874,Int 28F640W18-T
Fl1: 0x02000000-0x027FFFFF,00898874,Int 28F640W18-T
Algorithm: w2_int_b.fia, Ver: 4.15.0
Area1: 0x00000000-0x007FFFFF Erased, Time: 01:21


I then click on the MCU's "enable flashing", and the PPM's "enable flashing"
when I then click on "Flash" I get:
1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,00898874,Int 28F640W18-T
Fl1: 0x02000000-0x027FFFFF,00898874,Int 28F640W18-T
Algorithm: w2_intel.fia, w2_cbusb.fia, Ver: 4.15.0
Algorithm Ok, MSID: 8473C336FD07EBC14EDE51E308
Decoded MSID: 3E4EBAF7-00447F78-A8000000
Encoded FAID: DD65E298-1CFA5493-7B5AF64C
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x006FFFFF Erased, Time: 01:08
Area3: 0x02000000-0x023FFFFF Erased, Time: 00:38
Erasing: 0x04000000-0x046DDFFF ...
Erasing Error: 10, at: 0x04000000-0x0401FFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile

At least with the adapter soldered in, it's 100% consistent now.
Any ideas on what "Erasing Error 10" means?

Thank you again for your help

hanis
17th November 2006, 13:06
I have an N-Box purchased here from I-Phone/IPMart. I'm trying to flash my Nokia 3650.
MCU file=NHL83042.7c1
PPM file=NHL83041.732


i think i know your problem. as u can see in the quoted box, u select different version of mcu & ppm. now try again with the same version.
e.g:

MCU=NHL83042.7c1
PPM=NHL83042.732

hope this will help. tq.

etgo
18th November 2006, 02:20
hi, can twister box unlock nokia 1112? how can i do unlock it?

acuys
19th November 2006, 16:55
Great Collections
thanks..thanks..thanks..

shponglize
20th November 2006, 05:17
That was a typo on my part. I've been using matching files:

MCU=NHL83041.7c1
PPM=NHL83041.732

I keep getting an Erase Error 10. While it's trying to erase Area 4.

1st Boot Err: Bad Resp DCT3, C3 C3 5
Cannot Detect Mobile Brand
1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,00898874,Int 28F640W18-T
Fl1: 0x02000000-0x027FFFFF,00898874,Int 28F640W18-T
Algorithm: w2_intel.fia, w2_cbusb.fia, Ver: 4.15.0
Algorithm Ok, MSID: 8473C336FD07EBC14EDE51E308
Decoded MSID: 3E4EBAF7-00447F78-A8000000
Encoded FAID: DD65E298-1CFA5493-7B5AF64C
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x006FFFFF Erased, Time: 01:08
Area3: 0x02000000-0x023FFFFF Erased, Time: 00:39
Erasing: 0x04000000-0x046DDFFF ...
Erasing Error: 10, at: 0x04000000-0x0401FFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile

UFS-3‚
20th November 2006, 06:05
the phone work before flashing?

normally if you need upgrade, you dont need click the "erase flash"

you are using old version, try use latest version v2.0.3

if still same, try check the 3650 PCB, rehot the flash chip (seen you got problem when the dctx try erase the flash before flashing)

Jysmc
20th November 2006, 09:48
@shponglize
try untick Enable BT flashing and flash again

shponglize
20th November 2006, 09:52
The 3650 did work before flashing, and I am using the latest 2.0.3 version of UFS_DCTxBB5.

No matter what I click on, I always get "Erasing error: 10". I only tried "erase flash" after trying both the "Start" and the "Flash" buttons and having them fail.

I'm not able to re-heat the flash chip. I'm sure it's under those metal covers somewhere, but after my experience with my Motorola V3, there is no way I'm going to open this phone up. If there isn't some kind of test-pointon the 3650, or software trick, that can get me back going, I'm probably just throw it away (sad).

shponglize
20th November 2006, 09:59
Thanks for everyones help! I really appreciate it.

I have tried un-checking the "Enable BT Flash", but no change to the situation. I still get the same error.

shponglize
20th November 2006, 11:21
SUCCESS!!! :-) YEEEEHAAAAA!

After using google I found a suggestion that recommended uninstalling the UFS suite and downgrading it to 2.0.1. After I did that, I could flash 100% fine.

So now the question is.. what do I do next? I have flashed the MCU and PPM. Do I have to flash the PM, or can I simply click on "UI Factory Defaults", and "Full Factory Defaults", and then click "Format User Area"?

shoaibk7
22nd November 2006, 07:25
from where can i get the mainsoft ufs3 hwk plz help me

amjed_uk
12th December 2006, 04:32
Tanks for your help

nurulfaiq
29th December 2006, 21:20
hallo iam sorry because i too bat inglish

sultanpk
4th January 2007, 21:18
Please tell me how to upgrade the main soft of UFS 3/tornado.I have download the new firmware v3.0.3 and installed but when I try to connect my box in KZF(sony Eric)it shows the license is true but the box is not compatible with software.what should I do to solve this problem?Thanx to all in advance who help me.

Please help....................?
Sultan

mitracell
6th January 2007, 11:38
Hello..alls!

How dee?

Keszyn
9th January 2007, 01:49
Hi i got Nokia 1100 ... And after flshing ppm it's imei ??????????????4 I got N-Box can i fix it?Could you help me?Plz!:)If someone is form poland plz write in polish.

UFS-3‚
11th January 2007, 14:44
Hi i got Nokia 1100 ... And after flshing ppm it's imei ??????????????4 I got N-Box can i fix it?Could you help me?Plz!:)If someone is form poland plz write in polish.


try 1100 imei patch, write imei, init simlocks

3R
11th January 2007, 18:09
try 1100 imei patch, write imei, init simlocks

is this can solve the problem????
or after that the phone alive normally???

thanks

Unicca
6th February 2007, 22:12
i have n-box non hwk.. how can i update the firmware.. i try to install the UFS Suite set up v3.04 but i can not connect the phone.. if i use old DCX xBB5 verson 1.4 it works.. any solution please..

UFS-3‚
8th February 2007, 04:03
dont use ufs suite v3.04 if your box have been use crack/patch hwk before

goldkiller
9th February 2007, 19:22
Now patcher for HWK is

apollo1967
12th February 2007, 08:45
Hello To All...

apollo1967
12th February 2007, 08:48
Does anybody here tried running UFS Box in JAF Interface without Pkey? Please post if you have. Thanks!

antipatka
19th February 2007, 15:28
I have a N-Box (v 2.6)non HWK from I Phone.I try to use UFS Suite V.3.04,the box is not working with this version .but with v.3.03 and v.3.02,box is working perfectly.I didnot use any crack/patch HWK.I hope you could help me with this problem.

ardie
19th February 2007, 17:21
haiiiiiiiiiiiiii

saheb
1st March 2007, 21:16
box 32 error give proper solution,,,,,,tried all software.

telman
2nd March 2007, 11:16
I have acquired n-box with hwk from I-phone but with version 3.04.01 it does not work. It gives back error box_auth_code: 20 Please you help me!!! Moreover

I do not succeed to record to me on the situated one of support because it says to me that the box it turns out recorded already!!

Best regards

bamesal
7th March 2007, 23:26
hi m new in this fourm i bought uf3 from ebay and downlaod the sotware ufs when i try to conect with the nokia bbc hwk sotware says enter the activation string i generate the string with my box s/n and enter its he says reconect the box when reconect it its says agin activation any idea how to enter the right string ??

r-guiles
8th March 2007, 01:09
you need to buy hwk module attach to ufs

bamesal
9th March 2007, 20:20
hwk is a software or its part which is attached with the ufs ?? bcz i m new so i m asking these question i have ufs3

vinrose67
17th March 2007, 10:47
i'm using dctxbb5 tools v2.0.1 hwk by sarassoft
1) everytime i flash my 6600 in wd2 pane i get this this message.

"an expected exception cannot open AVI"

what will i do?

2)bb5 pane doesnot work i can't do anything it seems hang plz help!

hanis
19th March 2007, 17:32
thanks for all the tools

santocung
20th March 2007, 21:13
anybody have software UFS Suite Setup v03.04.001 (Update).exe. file size about 5,9MB.
Thanks....

bamesal
20th March 2007, 23:40
i need this file as well if any body have pls post it

one_gaiden
1st April 2007, 22:03
hi, thank for the information.
it's useful for my ufs box. thx a lot

Asrar
4th April 2007, 02:14
[Only registered and activated users can see links]
follow these steps to solve the problem
1. check cable
2. if ur HWK is CLONE or PATCHED remove and flash again 6600 work 100&#37;.

mimo90
10th April 2007, 23:18
thnxxxxxxxxxxxxxxxxxxxxxxxxx maaaaaaan goooooooooooooooooooooood work plz i want SarasSoft Box

Asrar
11th April 2007, 14:26
visit to buy new saras product with powerfull falshfile support.
[Only registered and activated users can see links]

bamesal
11th April 2007, 21:30
this link is not working ma8 repost the link again and pls shair the ufs suite ver 3.02, 3.03 or 3.04 many members waiting for these version

lorkanov
7th May 2007, 15:17
Hello To All...
Hello to all too. New forum member.

ptnetwork
11th May 2007, 01:27
hi i new user for UFSx & new in this forum,anyone can helpme!,I want downlord flashfiles site100% free plzzzzzzz,,tq for support bro

ccipo
27th May 2007, 20:06
Now patcher for HWK is

virussss......................................

mmukhlis
17th June 2007, 18:13
virussss......................................

thnks ccipo for warning,

try this one.

vivekanandan
17th June 2007, 20:14
when i connect my ufs-5 box it shows new hardware found usb>serial,pls help me

hamidFFFF
27th June 2007, 22:09
salom
heeeeeelp
original ufs
original hwk
HWK_Suite_Setup_v2.0.5
not update.

ken|X|360
27th July 2007, 23:05
haiii...i need all nokia DCT-3 pmm file, DCT-4 pm file and WD2 pm file...anybody can attach their new FILE for TORNADO...

nurulfaiq
28th July 2007, 18:34
try this page [Only registered and activated users can see links]

ken|X|360
29th July 2007, 12:52
tQ nurulfaiq...

arlmando
1st August 2007, 18:52
please can you hook me up with ufs tools. am new user of a ufs tornado flasher

hung1441965
5th August 2007, 14:22
red N-box: ufx v2.2, ufsufb v2.6 serial 101389 support already yet ?
i take this box from my friewd but lost use and pass, now how i can do register again. who can i do, please!

biswajit
12th September 2007, 09:18
i want the ufs-5 setup file n also the twister dctx v2.6

tranquil20
26th September 2007, 04:51
pls help, i have problem during flashing BB5 using twister..i get this error- ERR CMT 2ND BOOT. what can i do to solve this..thanx in advance!

arlmando
28th September 2007, 11:47
thanks for the good job!!!

djstefanno
24th October 2007, 00:16
i need new software hwk by sarassoft 2.....

arlmando
29th October 2007, 17:38
don't have it, but try and download Alibaba software that works just like the ufs, it's got an incoded program that includes hwk software. don't know where to download it buddy, but maybe it i've got more time i might upload it for you buddy. meantime keep searching see if you can find. take care

tazeem
3rd November 2007, 18:21
hello toevery one, iam new to fouram

alamgir80
14th November 2007, 16:38
UFS Box Description Editor by neb v1.0
-edit ufs box description
*******

Download problem (UFS Box Description Editor v1[1].0.rar (63.8 KB, 1221 views) what can ido

alamgir80
20th November 2007, 11:45
When I repair UFS-5 it's show UFS3 anyone help me

chiefonline
20th November 2007, 14:49
hereis main software for [ learning ]


Ufs flashing all software old and new single setup



[Only registered and activated users can see links]

cannot link this url please someone tell me where to go or what to do

sajib_ngag
22nd November 2007, 10:31
When I repair UFS-5 it's show UFS3 anyone help me


coz it is ufs3 oky?some one fake you....................:roflmao:

mrkwel
5th December 2007, 06:39
Hi Guyz
Em new Here
I Have UFS-3 Tornado nd I have Lost The Cd
Can Any One Upload The Driver n software ov UFS-3 tornado ?
THANX In Advance ;)

por hy
5th December 2007, 22:08
hi
after i update hwk from usf tool,it 's problem hwk.why?
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: 105107
HID: 31EFE60742600082
HWK: A1.04-PRO1
HWK: NOT AUTHORISED, USE UPDATE TOOL

help me ?
thanks.

manoj123saho
10th December 2007, 05:09
Now this the time to use this attached tool.
No need to use any crack,install any crack or anything else.
just execute thisone and enjoy using ufsx+hwk.
browse all ufs shortcuts from this tool which is placed on right hand side lower corner from your desktop.

chiefonline
10th December 2007, 10:58
thanks so much mr this tool should be helpful,will try it now

jafar hasan
13th December 2007, 14:55
hi
guys.actually i am new in this forum.

jafar hasan
13th December 2007, 14:59
Hi Guyz
Em new Here
I Have UFS-3 Tornado nd I have Lost The Cd
Can Any One Upload The Driver n software ov UFS-3 tornado ?
THANX In Advance ;)

try this Link to download all required files.[Only registered and activated users can see links]
Jafar

jafar hasan
19th December 2007, 13:50
I Have 'please Wait' Problem In My Ufs5 Box.any Solution Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.

manoj123saho
8th January 2008, 05:13
I Have 'please Wait' Problem In My Ufs5 Box.any Solution Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.



how much time u try?

jafar hasan
8th January 2008, 15:56
how much time u try?

I've tried it many time but the reult is same PLEASE WAIT.

adee aleooh
9th January 2008, 12:25
tankasssssssssssssssssssssssssssssssssssssssssssss sssssssss

anduras
14th January 2008, 20:12
help me please,ican't update my hwk
Upgrade log:
---------- HWK Update Client v 2.0.6.0 ----------
---------- HWK upgrade started:5:00:14 AM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 78336
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-PRO1-FDC8441E4160004E
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication successfull......no more upgrade log

i buy this hwk from ipmart, please help me ....:suicide::suicide::suicide::suicide:

Marwat233
23rd January 2008, 22:15
Sir,


i have ufs-6,
sum information\news\update about it

alamgir80
24th January 2008, 22:17
help me please,ican't update my hwk
Upgrade log:
---------- HWK Update Client v 2.0.6.0 ----------
---------- HWK upgrade started:5:00:14 AM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 78336
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-PRO1-FDC8441E4160004E
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication successfull......no more upgrade log

i buy this hwk from ipmart, please help me ....:suicide::suicide::suicide::suicide:

1.you first install "HWK_Support_Suite_Setup_v02.06.000.exe"
then update hwk and log save to C:\Program Files\SarasSoft\UFS\UpdateClient
2.Now install "HWK_Suite_Setup_v02.06.000.exe"
& enjoy

manoj123saho
26th January 2008, 05:19
Sir,


i have ufs-6,
sum information\news\update about it





All ufs5,6 all are chiniese cloned ufs products,and all are same as ufs 3.
just download and run cracked saras,tornado softwares with this box

raynieatan
2nd February 2008, 14:17
hello i'm ray, some body have tornado old version software for tornado, coz i have one tornado box, no upgarade to hwk, than i format my pc so i loss my old file, so who have plz post it to me. thanks you

ptnetwork
2nd February 2008, 16:01
hello i'm ray, some body have tornado old version software for tornado, coz i have one tornado box, no upgarade to hwk, than i format my pc so i loss my old file, so who have plz post it to me. thanks you
u can downlord here......

[Only registered and activated users can see links]

hkdholwani
2nd February 2008, 16:42
Where To Find New Modles Flash Files. and i also want CDMA Files

manoj123saho
7th February 2008, 21:21
Where To Find New Modles Flash Files. and i also want CDMA Files






here is one link : [Only registered and activated users can see links]

Your Product : ufs-6
ID Number = 128668
Password = drr058

simsat
9th March 2008, 16:49
thanks for uploads......

ΓΔЅĐΘЛЛУ
11th March 2008, 17:12
u can downlord here......

[Only registered and activated users can see links]

Hi everyone,
[Only registered and activated users can see links]

Can anyone comment on this thanx! :afraid:

moshinbud
11th March 2008, 19:21
i want to buy one box for me. but i need to know witch box is the best for nokia, sony ericsson. please answer this questions. pls

manoj123saho
14th March 2008, 04:01
better to go for infinity one
this is the best box
supports max.. no. of models

prasokgtlo
18th March 2008, 14:29
Anyone knows about ufs micro?

manoj123saho
25th March 2008, 00:41
Hi everyone,
[Only registered and activated users can see links]

Can anyone comment on this thanx! :afraid:



just try to download from support site powerflasher.org
login id password u will find from google search

thanx....

moshinbud
25th March 2008, 18:52
Can someone tell me wich flash file i can select to make a flash? pls

karyawati
25th March 2008, 21:14
Thanx to all 4 de gr8 information and share.realy2 usefull 4 me.

jleigthon
28th March 2008, 21:16
Tanks for your help

manoj123saho
1st April 2008, 03:49
Can someone tell me wich flash file i can select to make a flash? pls



plz ask your queries with full details
what u want to flash

moshinbud
2nd April 2008, 14:36
I have a sarasoft box Ufs 6. and than i dont now how to flash a nokia mobile and sony ericsson. Pls help

manoj123saho
11th April 2008, 18:56
I have a sarasoft box Ufs 6. and than i dont now how to flash a nokia mobile and sony ericsson. Pls help






for nokia just select *.m0 files for mcu and select *. any alphabets like ab,cd mb etc for ppm flasing and also tick all necessary types like init simlock,factory reset etc.and finally flash.
but u have to choose both the files of same version

mhassan
25th April 2008, 21:34
I have a dead tornado but i cannot force im to accept the drivers it recognized as generic usb and when i point the drivers its doesnt accept
says"cannot find information about this hardware"
Im working in XP with SP2
Pls help me
Regards

mhassan
25th April 2008, 21:41
I have a dead tornado but i cannot force im to accept the drivers it recognized as generic usb and when i point the drivers its doesnt accept
says"cannot find information about this hardware"
Im working in XP with SP2
Pls help me
Regards:thanks:

any one plzzzzzzzzzz solve my problem


regards

kadalbuntung
1st May 2008, 11:55
I Alredy Have My Ufs Not Working,it Need Active Sting Code
My Question Is How And Where I Can Make A Req Code?
I Like To Convert Req To Fbi To
Any One Can Help Me??????????

manoj123saho
14th May 2008, 22:08
I have a dead tornado but i cannot force im to accept the drivers it recognized as generic usb and when i point the drivers its doesnt accept
says"cannot find information about this hardware"
Im working in XP with SP2
Pls help me
Regards




you need to insall win98 to do this kind of job
i hd already done this in win98
with winxp this is not possible

estamer2007
31st July 2008, 03:43
thank you very much

anwar726
22nd August 2008, 13:00
alway show
1st boot error: bad responce from ufsx
1st boot error: bad responce from ufsx
repovering mobile:idol:

iway_4252
21st October 2008, 09:34
i want ufs 2.3 anyone help me

mobil2mobil
31st October 2008, 08:52
pls help. i have vista operating system for my laptop. my ufs3 software not working this laptop.

yui
1st November 2008, 04:18
mot workkkkkkkkkkkkkkkkkkkkkkkkkkkk

FASTREPAIR
26th November 2008, 17:13
good work sir,thanks a lot!

manoj123saho
27th November 2008, 00:53
pls help. i have vista operating system for my laptop. my ufs3 software not working this laptop.



better to use winxp for flashing,plz load winxp if u want to use saras.
wat kind of hardware u used ,is it cloned or original?

eugenetorre
3rd December 2008, 00:22
DLL Library UFS2XX, did not found!!!
please help!

manoj123saho
5th December 2008, 00:46
DLL Library UFS2XX, did not found!!!
please help!




try to reinstall ufs driver located in saras folder in programme file,if not solved then copy requred dll file from usb driver folder from tht saras folder to system folder n post ur result with full details if not solved, wat n how u run.

JULAX
8th December 2008, 22:19
Help me. I have UFS3
Why can not flash RH-99?

manoj123saho
10th December 2008, 04:43
Help me. I have UFS3
Why can not flash RH-99?

hv u original hwk inside if yes then download latest ufs suite+ hwk install if not then try jaf cracked..
u will find jaf cracked by google search if not then mail to get the link.
but better to use jaf if u use clone box or without hwk.

gsmtraker
26th December 2008, 07:24
howe im repair imei with powerflasher.........?
aney one help me plese.

inqredible
30th December 2008, 23:46
plz help whenever i am trying to connect my UFS box its showing pleasewait and connect is highlighted again

inqredible
1st January 2009, 17:31
help ufs box cannot connect coming back to connect option again

manoj123saho
2nd January 2009, 21:17
help ufs box cannot connect coming back to connect option again

try to reinsall ur driver n post result.
wat version of ufs soft u used n r u using cloned or original
give details

a2purn
3rd January 2009, 04:45
check you usb cable bro...

GASAN
4th March 2009, 16:52
Does the ufs 3 clone box have support for the samsung e250 does anyone know please advise urgently.

manoj123saho
4th March 2009, 20:42
478063
Does the ufs 3 clone box have support for the samsung e250 does anyone know please advise urgently.

no solution for newer fones without original hwk

free solution link
[Only registered and activated users can see links]

tariq_h
5th May 2009, 15:38
Well done friend!!!!!!!!!!!!!!

unlockstgo
3rd June 2009, 17:58
I have a GTS-BOX (Griffin+NBox+UniBox)

Upon executing the application the N-BOX DCTXBB5, the following error gives me:
[272] Debuger Detected: please desabled and restart of application.

I have found on the Internet that this is solved creating another user of the Administrative group (I have WinXp SP2). I have verified this solution and functions, but now the same thing happens me. I have created again another USER and functions OK. .... Another solution for this problem exists. ... therefore this apparently is temporary. ...

I expect respond Greetings

Enclosed the image with the error.

Besides pair by the theme: [Only registered and activated users can see links] and they help me with that unfreezing of a Nokia 1112 with this same box.

lonely lady
6th June 2009, 02:17
thanks for this post

SHIBLU
19th August 2009, 17:04
try this Link to download all required files.[Only registered and activated users can see links]
Jafar

link not found need another........:thanks:

SHIBLU
19th August 2009, 17:09
need help for update ufs-3 tornado flasher...........
i m using ufsdctx bb5 2.0.3
i want to update it to 2.0.8 or higher....

boyzone cell
6th August 2010, 11:05
Hellp update DONE
------------------------------------------------------------------------------------
-- UFSx Device: UFS3 AESHFFU74, USB S/N: 93581
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 93581
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TWISTER
-- HWK ID : A1.04-PRO1-A98FAE6F4260001A
-- HWK Status : 1, DL: 0
-- BOX_KEY Updated
-- Done.
------------------------------------------------------------------------------------

Upgrade log:
---------- HWK Update Client v 2.0.9.0 ----------
---------- HWK upgrade started:8/6/2010 3:04:17 PM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 93581
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TWISTER
-- HWK ID : A1.04-PRO1-A98FAE6F4260001A
-- HWK Status : 1, DL: 0
-- BOX_KEY Updated
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 93581
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TWISTER
-- HWK ID : A1.04-PRO1-A98FAE6F4260001A
-- HWK Status : 1, DL: 0
-- Done.
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Error: Server returned unrecognized reply

Plizz your mail to boyzone cell tenx..........????????????

boyzone cell
22nd August 2010, 07:32
Help.....Master-master,please DRIVER UFS3 & HWK.

segah99
22nd August 2010, 14:12
Help.....Master-master,please DRIVER UFS3 & HWK.

Here....link......


[Only registered and activated users can see links]

GOOD HELP

attis320i
2nd September 2010, 16:49
hy-
kis segitsťg kellene---sarasoft usf 3 tornado USB DRIVER??????????????

attis320i
2nd September 2010, 20:08
hy!
no i found sarasoft usf 3 tornado USB DRIVER-----please HELP
attis320i -hungary

harjeet1990
19th January 2012, 16:41
when i connect my hwk micro then it shows ufs s/n corrupted:90 pls pls help meee..

mrshorty1313
11th March 2012, 06:28
thanks ever so much

ayoub ali
15th March 2012, 08:07
ufs3 HWK_Support_Suite_Setup_v02.20.000 new

---------- Above post added at 11:56 ----------
Below post was at 12:07 ----------

I need ufs3 HWK_Support_Suite_Setup_v02.20.000 new file please help me