21.06.2006 - New ARM inside v2.7

- Added support without test point for W700 CID 31 hex (CID 49)
- Added support without test point for K510 CID 31 hex (CID 49)
- Added support without test point for W300 CID 31 hex (CID 49)
- Added support without test point for W600 CID 31 hex (CID 49)
- Restore "FLR" files for phones flashed with "AllInOne" available in FLR
folder – Updated
- “All in one” for W700 available, for the rest new added phones MCU and
PPM support
- Configuration repair files added for some phone models
- Unlock time if you have proper FLR file its 15 seconds per phone
- User manual for New ARM inside v2.7 available
- Full backups for all added phones available
- EEPROM backups for all added phones available

Be sure you have updated box to latest version using MT Box update tool v3.5

30.06.2006 - ARM inside v2.2


Added “WARM START” option - Fast repair for ARM phones

If can’t power on the phone after flash or repair:

- Connect phone to cable and press “Warm Start” button
- Please wait to phone power on
- After you see message “Insert sim” power of the phone using SWITCH,
please wait about 20 seconds then if you need to insert sim card remove
battery
- In case you remove battery from phone after “Warm Start” the phone will
not be repaired

Time need for repair - 2 seconds

10.07.2006 - New ARM inside v2.8


Imei change plug ins updated for some old models, also added some new
models:

- K510 CID 31 (CID 49)
- K600 CID 31 (CID 49)
- K750 CID 31 (CID 49)
- W300 CID 31 (CID 49)
- W550 CID 31 NoTp2 (CID 49)
- W600 CID 31 (CID 49)
- W700 CID 31 (CID 49)
- W810 CID 31 (CID 49)
- W900 CID 31 NoTp2 (CID 49)
- Z530 CID 31 (CID 49)


Be sure you have updated box to latest version using MT Box update tool v3.5
To change imei does no need to flash the phone.
Time need to change imei 15-40 seconds depend of phone model.

01.09.2006 - New ARM inside v2.9

- Added suport for K310 CID 31
- Added suport for Z550 CID 31
- Added imei change plugins for K310 CID 31
- Added imei change plugins for Z550 CID 31

New ARM inside v2.9 setup contain:

- FLR files for K310 CID 31:

k310-taiwan-r4da044.flr
k310-orange-r4da044.flr
k310-vodafone-r4da044.flr
k310-hk-r4da044.flr
k310-generic-r4da044.flr
k310-china-r4da044.flr

- FLR files for Z550 CID 31:

z550-r6ba033-taiwan.flr
z550-r6ba033-hongkong.flr
z550-r6ba033-generic.flr
z550-r6ba033-china.flr

- Imei change (without flashing) plugins available:

D750 CID 24
J300 CID 24
K300
K300 CID 24
K310 CID 31
K500-F500
K510 CID 31
K600 CID 25
K600 CID 31
K700
K700 CID 24
K750 CID 24
K750 CID 31
S700
V600 CID 24
V600 CID 31
V800
V800 CID 24
W300 CID 31
W550 CID 31
W550 CID 31 NoTp2
W600 CID 31
W700 CID 31
W800 CID 24
W810 CID 31
W900 CID 31
W900 CID 31 NoTp2
Z1010
Z1010 CID 1D
Z500
Z520 CID 24
Z530 CID 31
Z550 CID 31

- EROM Repair files
- Reset total call time counter file for all suported models
- Test point pictures
- User manuals

05.10.2006 - DB2020 inside realized for MT box SonyEricsson

Supported phones:

• K800
• K790
• K610
• V630

Features:

• Language change
• Upgrade phone software
• Decustomize phones
• Customize phones to desired network
• Convert phones from China to Europe market
• Convert phones from Europe to China market
• Repair dead phones
• Repair RED LED blinking phones
• Upgrade EROM version
• Reset total call timer
• Auto file detection
• Can operate with unlimited number of phones on one PC
• Can operate with unlimited number of EMMA cards
• All boxes can use the same EMMA card
• All boxes can use the same Griffin Server account
• Usage of PC CPU is 01% per connected box
• Card limit alert on desired percent of usage
• All process is off-line except finalize phone
• Auto detect function for new connected box
• Auto save login details for Griffin Server
• Automatic store EMMA card number and PIN
• Show you EMMA card key information
• Show you EMMA card counters
• Show you available keys on your EMMA card
• All features can be used in TRIAL mode with other MT box models , MT box Nokia and MT Siemens
• Very easy to use
• Simple user interface

Requirements:

• MT box SonyEricsson
• Griffin Team server account or EMMA card


BR GT

27.10.2006 - DB2020 v1.1 inside realized for MT box SonyEricsson



Added new models:

- W850
- Z610

Erom update files for K790 and V630 added
Reset user lock to factory default ( 0000 ) for all suported models
DB2020 user manual updated

Bug fix:

Solved problem in communication with some phone models (error2, error4)

27.10.2006 - NEW ARM inside v2.9b on support


- FLR files updated for K310 and Z530
- NEW user manual updated

12.11.2006 - ARM inside v2.3 available


- Added support for J230 R5K software version with new flash ic
- ARM inside user manual updated

05.12.2006 - DB2020 v1.2 inside realized for MT box SonyEricsson



Added new models:

- W710
- Z710


DB2020 user manual updated


Griffin server credits charging for DB2020 phones:

5 credits = 2.5 euro per phone

10.02.2007 - DB2020 v1.4 inside realized for MT box SonyEricsson


Whats new:

- Added support for CID 51 phones
- Added phone CID upgrade from CID49 to CID51
- User lock reset for CID 51 phones
- Added DCU-60 cable support
- Fast flash via USB, about 5 minute for 1 phone
- Multi flash option over USB, now can flash up to 256 phones at same time
- Aded USB master option, now your box can be master dongle for all connected DCU-60 cables
- USB drivers included in v1.4
- User manual updated
- Software crash bug fixed

Griffin server and 5 credits on it required to upgrade phone CID49 to CID51
Flash files upload in progress

23.02.2007 - DB2020 v1.5 inside realized for MT box SonyEricsson


Some bugs fixed

20.03.2007 - DB2020 v1.6 inside realized for MT box SonyEricsson


Added new models:

- K320 CID 50
- K610im CID 49
- K618 CID 49
- K618 CID 51
- W830 CID 49


- DB2020 user manual updated
- Some bugs fixed
- All phones are supported by Box and USB cable

27.03.2007 - DB2020 v1.7 inside realized for MT box SonyEricsson


Whats new:

- Added new phone model K550 CID 51
- Added new phone model W880 CID 51
- Added new phone CID 52 support for all models
- Reset total call timer for CID 51 and CID 52
- Repair red led blinking support for CID 51 and CID 52
- Reset user lock to factory default for CID 51 and CID 52

New files in installer:

- RepairRedBlinking-CID51.act
- ResetTotalCallTimer-CID51.ee
- RepairRedBlinking-CID52.act
- ResetUserLock-CID52.act
- ResetTotalCallTimer-CID52.ee
- EROMUpgradeCID51.ldr
- EROMUpgradeCID52.ldr
- Updated user manual v1.7

25.04.2007 - DB2020 v1.8 inside realized for MT box SonyEricsson


Whats new:

- Added new phone model W610 CID 52
- Fixed problem on PC with hyper threading
- Fixed problem PWD error when you have only 5 credits on your GT server account
- Some communication bug fixed

New files in installer:

- Updated user manual v1.8
- Added new files directories

09.05.2007 - DB2020 v1.9 with UNLOCK released for MT box SonyEricsson


Whats new:

- Added UNLOCK feature for DB2012 CID 50 all software versions
- Added UNLOCK feature for DB2020 CID 49 and CID 51 all software versions
- Added new phone model Z310 CID 51
- Unlock time about 30 - 40 seconds per phone

New files in installer:

- Added new files directories
- Added DB2020 unlock user manual
- Added FLR folder for restore files
- Added Unlock folder with special files inside :)


List of supported models:

- K550
- K610
- K610im
- K618
- K618im
- K790
- K800
- V630
- W710
- W830
- W850
- W880
- Z610
- Z710


Explanation:

The unlock is available for CID49 and CID51 phones.

How to unlock DB2020 phones:

- Start DB2020 v1.9 software
- Select desired phone model
- Connect phone to USB or box cable
- Press phone info button to check phone is ready or no,
- Also you need to check it is the supported CID or no
- Drag and drop “UnlockDB2020.act” file to software window
- Press Do It button
- Please wait to software finish
- If you want to change language on your phone, do it before you unlock the phone


***********************************
Power on the phone...
Boot OK.

PID:......99 00 03 01 FF FF FF FF
IMEI:.....351941-01-xxx551
PAF:......01
CID(dec):.49
CID(hex):.31
MfrID0:...89
DevID0:...7E
Color:....RED
CID in FLASH(dec):51
CID in FLASH (hex):33

Processing: DB2020 Unlock


Total:00:00:43:006

The end.
***********************************


How to unlock DB2012 phones:

- Start DB2020 v1.9 software
- Select K320 phone model
- Connect phone to box cable (for this phone USB is not available for unlock feature)
- Press phone info button to check phone is ready or no,
- Also you need to check it is the supported CID or no
- Drag and drop “UnlockDB2012.act” file to software window
- Press Do It button
- Please wait to software finish
- The phone is unlocked forever and you can flash it after unlock procedure



***********************************
Power on the phone...
Boot OK.

PID:......80 40 03 01 01 01 01 01
IMEI:.....353322-01-xxx266
PAF:......01
CID(dec):.50
CID(hex):.32
MfrID0:...89
DevID0:...7E
Color:....RED
CID in FLASH(dec):50
CID in FLASH (hex):32

Processing: K320 Unlock

Please wait...

Total:00:00:37:463

The end.
***********************************

To unlock DB2020 and DB2012 phones you will need to have Griffin server account with minimum 5 credits on it.
The price for unlock is 5 credits (same as for language change)
If you don't have Griffin server credits please contact any of our resellers, we don't have quantity limits.
Griffin server credits has no time limit or expiration date, can be used for many many incoming features.
All MT box Nokia and MT box Siemens users can use this feature also by using TRIAL try


Nice day wish you Griffin Team

17.05.2007 - DB2020 inside v2.0 for MT box SonyEricsson


Whats new:

- Added new phone model K810 CID 52 (flash only)
- Added new phone model W200 CID 52 (flash only)
- DB2020 unlock user manual v2.0 included (DB2020 inside -> Help -> User manual)
- DB2020 unlock manual on Polish language inlcuded in DB2020 documents (credits goes to GSMinfo)


To stay tuned with Griffin Team updates please use RSS news ([Only registered and activated users can see links])

20.05.2007 - DB2020 inside v2.0a file add for MT box SonyEricsson



New FLR DB2020 flr files

K618 R1ED001 prgCXC1250556_VODAFONE_MW.flr
K618 R1ED001 prgCXC1250574_GENERIC_MW.flr
K618 R1ED001 prgCXC1250574_GENERIC_MW_1.flr
Z710 R1JC002 prgCXC1250434_CHINA_CN.flr
Z710 R1JC002 prgCXC1250434_GENERIC_CN.flr
Z710 R1JC002 prgCXC1250434_NAM_1_CN.flr


New repair files:

UpgradeCID49_CID51_to_CID52.ee
ResetFlipCounter.ee

Download and install Db2020 inside v2.0 first, then download and install DB2020 file add

To stay tuned with Griffin Team updates please use RSS news ([Only registered and activated users can see links])

21.07.2007 - DB2020 inside v2.2 for MT box SonyEricsson


Whats new:

- Added new phone model W660 CID 52
- User manual DB2020 v2.2 updated
- New flash files uploaded to both support sites

30.07.2007 - DB2020 inside v2.3 for MT box SonyEricsson


Whats new:

- Added new phone model K510 CID 50 (unlock only)
- DB2020 unlock user manual v2.3 included (DB2020 inside -> Help -> User manual)
- Some bugs fixed
- User manual updated


Procedure for unlock K510 CID 50 its same as for K320 CID 50:

- Start DB2020 inside v2.3
- Read phone info
- Select phone model K510
- Add DB2012-K510-Unlock.act file to software
- Select GT server
- Press DO IT button

Flashing option and support for all other CID 50 phones will be added ASAP.

05.08.2007 - DB2020 inside v2.4 for MT box SonyEricsson


Whats new:

- Added new phone model W810 CID 50, unlock and flash supported
- Flash, change language, decustomization support added for K510 and W810 CID 50
- Added possibility to flash CID 49 flash files to CID 50 phones
- Added possibility to flash only language pack (check user manual)
- Added more free time for server authorization for users with slower internet connection
- Some bugs fixed
- Added all in one activation files for K510 and W810 CID 50 (that files can be used with any FS pack)
- Instructions how to flash CID 49 files to CID 50 phones can added to user manual
- DB2020 unlock user manual v2.4 included (DB2020 inside -> Help -> User manual)



How to flash K510 CID 50 (the same procedure for W810 CID 50)

- Power on the phone
- Type >*<<*<* and go to service menu -> Service info -> Sim lock
and check it is all lock opened (maybe someone are try to unlock it with some other solution and the phone now have all locks closed)
- If all locks are closed , you can try to repair it using unlock procedure
- If that is ok connect phone to cable and press phone info to see what phone CID is
- If phone CID 50 select from
C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Repair files\Downgrade-K510.act

- This file must be first file added in software file list
- Now select MCU, DEC and CUS file
- In total you need to have 4 files added to software file list
- If there is no desired CUS file you can use All in one activation K510.fs its found in :
C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Flash files\K510 CID 50\R4EA031\CUS

- Press Do it button
- Wait to software finish
- To flash DB2012 phone use only BOX cable
- If your phone has same software version as files you want to flash, then is available to flash just
language pack (no need to add MCU file to file list)
* The files available on support are CID 49, because of this you need to use Downgrade file, to allow flash CID 49 files to CID 50 phones

10.08.2007 - DB2020 inside v2.5 for MT box SonyEricsson


Whats new:

- Added new phone model K310 CID 50, unlock and flash supported
- Added all in one activation files for K310 CID 50 (that files can be used with any FS pack)
- DB2020 unlock user manual v2.5 included (DB2020 inside -> Help -> User manual)

15.08.2007 - DB2020 inside v2.6 free flash for DB2020 phones


Whats new:

- Added new phone model K200 (same for K220)
- No more need server credits for flashing, language change or decustomize DB2020 phones and PNX Z310.
This feature its free of charge for all MT SE users.
Can flash one phone 100 times and your credits will not be reduced.
Also customers who use EMMA cards no need it for flashing.
- Reset total call timer, reset user lock, etc also its free of charge (NOT unlock, CID downgrade)

New files available:

- Phone lock view for DB2012 phones (can be used for w200 also)
- DB2012 Reset Total Call Timer (can be used for w200 also)
- SE_K200_K220_language_description.pdf in Documents folder
- K200 clear user data (can be used for K220 also)
- K200 reset user lock (can be used for K220 also)
- k200 Reset Total Call Time (can be used for K220 also)
- DB2020 unlock user manual v2.6 included (DB2020 inside -> Help -> User manual)

17.08.2007 - DB2020 inside v2.7 free flash for DB2020 phones


Whats new:

- Fixed error when try to reset user lock

11.09.2007 - DB2020 inside v2.8


Whats new:

- Added new phone model J120
- Updated user manual v2.8

New files in installer:

- j120_Total Call Time Reset.act
- j120_SMS Reset.act
- j120_Phone Lock Reset.act
- j120_Phone Book Reset.act

Users who have installed DB2020 inside v2.7 can download and install "db2020inside_for_v2.7_users_only.exe"
New users need to download full installation "DB2020 inside v2.8.exe"

26.09.2007 - DB2020 inside v2.9


Whats new:

- K200 and K220 unlock supported by codes via Griffin Server
- K200 and K220 lock to network supported by codes via Griffin Server
- Codes are stored to log file

----------------------------------
Power on the phone...
Boot OK.

PID:......92 00 01 01 FF FF FF FF
IMEI:.....356177-01-xxxxx
EROM:.....MicroEROM v1.0
MCU:......CXC1250819 R1AA008
CDA:......CDA102772/3 R3A

Processing: Read UNLOCK NCK
Code:0858812556748599

Total:00:00:01:328

The end.
----------------------------------



- New models supported:

- K530 CID 52
- W580 CID 52
- T650 CID 52

- Added DB2012 Upgrade CID 51 to 52 support
- Updated user manual v2.9



New files in installer:

- Read UNLOCK SPCK.act
- Read UNLOCK NSCK.act
- Read UNLOCK NCK.act
- Read UNLOCK CCK.act
- Read LOCK SPCK.act
- Read LOCK NSCK.act
- Read LOCK NCK.act
- Read LOCK CCK.act
- DB2012 Upgrade CID 51 to 52.ee

Users who have installed DB2020 inside v2.8 can download and install "DB2020inside_for_v2.8_users_only.exe"
New users need to download full installation "DB2020 inside v2.9.exe"

04.10.2007 - DB2020 inside v2.9a


Whats new:

- SonyEricsson J110 and J120 unlock supported
- User manual updated to v2.9a

Users who have installed DB2020 inside v2.9 can download and install "DB2020inside_for_v2.9_users_only.exe"
Please follow user manual for instructions about unlock

10.10.2007 - DB2020 inside v3.0


Whats new:

- Added View phone lock status feature for DB2020 phones

What this feature mean:

You can check it is phone unlocked by patch method or no before you flash it.


How this work:

- Start DB2020 inside software
- Select phone model
- Add to software View Lock Status.act
- Press Do it button than wait to software finish

If the phone is unlocked by codes or its never locked the info will be:
----------------------------------
10/9/2007 14:07:27:031
Power on the phone...
Boot OK.
PID:......80 40 03 01 01 01 01 01
IMEI:.....354269-01-xxxxxx
PAF:......01
CID(dec):.51
CID(hex):.33
MfrID0:...89
DevID0:...7E
Color:....RED
CID in FLASH(dec):52
CID in FLASH (hex):34
Processing: View Lock Status
NCK: UNLOCKED...................5/5
NSCK:UNLOCKED...................5/5
SPCK:UNLOCKED...................5/5
CCK :UNLOCKED...................5/5
PCK :UNLOCKED...................5/5
ESCK:UNLOCKED...................10/10
Total:00:00:28:719
The end.
----------------------------------

If the phone is unlocked by patch method the info will be:

----------------------------------
10/9/2007 14:07:27:031
Power on the phone...
Boot OK.
PID:......80 40 03 01 01 01 01 01
IMEI:.....354269-01-xxxxxx
PAF:......01
CID(dec):.51
CID(hex):.33
MfrID0:...89
DevID0:...7E
Color:....RED
CID in FLASH(dec):52
CID in FLASH (hex):34
Processing: View Lock Status
NCK: UNLOCKED...................5/5
NSCK:UNLOCKED...................5/5
SPCK:UNLOCKED...................5/5
CCK :UNLOCKED...................5/5
PCK :UNLOCKED...................5/5
ESCK:LOCKED...................10/10
Total:00:00:28:719
The end.
----------------------------------

15.10.2007 - DB2020 inside v3.1


Whats new:

- Fixed bug with K220 flashing

Users who have installed DB2020 inside v3.0 can download and install "DB2020inside_v3.1_for_v3.0_users_only.exe"
New users need to download full installation "DB2020 inside v3.1.exe"

22.10.2007 - DB2020 inside v3.1a


Whats new:

- Added direct unlock support for K200 and K220 (no need credits)
- User manual updated, please check it for right unlock way

Users who have installed DB2020 inside v3.1 can download and install "DB2020inside_v3.1a_for_v3.1_users_only.exe"
New users need to download full installation "DB2020 inside v3.1.exe" then download and install "DB2020inside_v3.1a_for_v3.1_users_only.exe"

31.10.2007 - DB2020 inside v3.2


Whats new:

- Added new model T250 (flashing only)
- Added new model Z320 (flashing only)
- Added support for W810 CID 50 new PID phones
- User manual updated, please check it before start to do anything

New files in installer:

- db2020inside.exe v3.2
- Db2020Inside.pdf v3.2
- t250_z320_Reset User Lock.act
- t250_z320_Reset Total Call Timer.act

Users who have installed DB2020 inside v3.1 can download and install "DB2020inside_v3.2_for_v3.1_users_only.exe"
New users need to download full installation "DB2020 inside v3.2.exe"

07.11.2007 - DB2020 inside v3.3


Whats new:

- Added new model K770
- Added new model W300 (flashing only)
- Added new model Z530 (flashing only)
- Added support for Z310 CID 52 upgraded phones from CID 51
- Added read all info from Z310
- User manual updated, please check it before start to do anything


Users who have installed DB2020 inside v3.2 can download and install "DB2020inside_v3.3_for_v3.2_users_only.exe"
New users need to download full installation "DB2020 inside v3.3.exe"

05.12.2007 - DB31xx inside v1.0 - DB31xx (A2) supported standalone


Whats new:

DB31xx is new software realize for MT box SonyEricsson for new SEMC platform called A2
The software can be used with all MT box SonyEricsson and upgraded MT box Nokia to MT box SE.
How to upgrade your MT box Nokia to MT box SonyEricsson unlimited see here ([Only registered and activated users can see links]).
The software are free upgrade for all MT box SonyEricsson users and work as standalone without logs and without limits.

Supported phone models:


K850
Z750
W910



Some software features:


Standalone software
Language change
Upgrade phone software
De customize phones
Customize phones to desired network
Convert phones from China to Europe market
Convert phones from Europe to China market
Repair dead phones
Reset total call timer
Reset user code to factory default 0000
Read phone software version information
Read phone customization info
Read phone language information
Read phone OTP “color” information
Read phone FLASH “color” information
USB support via DCU-60 cable (the same one from phone package)
USB multi flashing interface with support up to 256 phones at same time
Can operate with unlimited number of phones on one PC
Usage of PC CPU is 01% per connected box
All process is off-line
Auto detect function for new connected box
All actions are stored into the log file “db31xx.log” in software directory
Auto save login details for Griffin Server
All features can be used in TRIAL mode with other MT box models , MT box Nokia and MT Siemens
Very easy to use
Simple user interface


Flash files upload in progress...

09.12.2007 - DB2020 inside v3.5 - Z310 CID 51 unlock by patch supported


Whats new:

- Added Z310 CID 51 unlock by patch
- Added FLR files for Z310 CID 51
- Added Z310 CID 52 reset total call times
- Added Z310 CID 52 reset flip counter
- Added Z310 CID 52 reset user lock
- User manual updated, please check it before start to do anything

Supported phone versions for unlock:

- R1JE001 prgCXC1250790_VODAFONE_AL
- R1JC002 prgCXC1250790_VODAFONE_AL
- R1JC002 prgCXC1250789_TELEFONICA_AL
- R1JC002 prgCXC1250739_TAIWAN_AL
- R1JC002 prgCXC1250737_CHINA_AL
- R1JC002 prgCXC1250594_GENERIC_AL


We recommend to all users to delete previous installation files from:

C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\

then install new DB2020 inside v3.5 because of some structure changes in installer



How to unlock Z310 CID 51


Start software
Select phone model Z310
Connect phone to BOX CABLE to check what CID is inside, the info need to be:

CID in FLASH(dec):51
CID in FLASH (hex):33

Drag and drop “Z310 Unlock-Public.act” file to software window, this file Need to be first on the file list in DB2020 software.
Then need to add usually flash files MCU, DEC and CUS to files list
Press DO IT button
Power on phone after software finish and wait to make initialization
USE ONLY BOX CABLE FOR UNLOCK
Unlock cost you 5 credits on Griffin server

The software can be used with all MT box SonyEricsson and upgraded MT box Nokia to MT box SE.
How to upgrade your MT box Nokia to MT box SonyEricsson unlimited see here ([Only registered and activated users can see links]).

more to come from GT as usual ...

17.12.2007 - DB31xx inside v1.1


Whats new:

- Fixed flash bug on some phone models
- Added automatic news reader. It will inform you always about new realises, new flash files on support etc


The software can be used with all MT box SonyEricsson and upgraded MT box Nokia to MT box SE.

17.12.2007 - DB2020 inside v3.6 - T250 and Z320 unlock by patch supported


Whats new:

- T250 unlock by patch supported
- Z320 unlock by patch supported
- Added automatic news reader. It will inform you always about new realizes, new flash files on support etc.
- If during unlock or flash process "POWER ON THE PHONE" message appears, please press phone power switch manually then software will continue.
This option is added because some DB2020 phones have problem to be detected on cable then you cant unlock or flash it.
- User manual updated


The software can be used with all MT box SonyEricsson and upgraded MT box Nokia to MT box SE.




Short user manual:

- Check phone battery and phone functionality before start to unlock it
- Select phone model T250 or Z320
- Add to software file list necessary file:

T250 Unlock.act if your phone is T250
Z320 Unlock.act if your phone is Z320

- Both files are available in:
C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Unlock

- Connect phone to box cable and press DO IT button
- Wait to software finish then power the phone


Users who have installed DB2020 inside v3.5 can download and install "DB2020inside_v3.6_for_v3.5_users_only.exe"
New users need to download full installation "DB2020 inside v3.6.exe"


more to come from GT as usual ...

26.12.2007 - DB2020 inside v3.7a


Whats new:

- New file to update DB2020 CID 49 & 51 to CID52-071124.ee
- This file allows you to update DB2020 CID 49 and CID 51 phones to CID 52 and unlock it without server or emma card

Users who have installed DB2020 inside v3.7 need to download and install "DB2020_inside_v3.7a.exe"
New users need to download full installation "DB2020 inside v3.7.exe" then download and install "Download and install DB2020_inside_v3.7a.exe"

The software can be used with all MT box SonyEricsson and upgraded MT box Nokia to MT box SE.
How to upgrade your MT box Nokia to MT box SonyEricsson unlimited ([Only registered and activated users can see links])

31.08.2009 - DB2020 inside v6.9


Release notes:

- Changed visible file names to be very short, added file path you can see if click with mouse over file name

New files in installer:

- DB2020 inside v6.9 ([Only registered and activated users can see links])

01.09.2009 - DB3xxx inside v3.7

Release notes:

- Changed visible file names to be very short, added file path you can see if click with mouse over file name

New files in installer:

- DB3xxx inside v3.7 ([Only registered and activated users can see links])

02.09.2009 - Symb inside v1.8

Release notes:
Changed visible file names to be very short, added file path you can see if click with mouse over file name
New files in installer:

Symb inside v1.8
GDFS backups
User manual updated

Rapid share link:

Symb_inside_v1.8.exe ([Only registered and activated users can see links])

02.09.2009 - MT SE Suite v1.1


Release notes:

MT SE suite v1.1 contain all MT box SonyEricsson supported software at one place
Software included in MT SE Suite:

ARM inside v2.3
AVR inside v1.8
C62 inside v1.1
CR 16B inside v1.1
DB2020 inside v6.9
DB3xxx inside v3.7
LG inside v1.5
MT2COM v1.1
New ARM inside v2.9
Sharp inside v1.4
Symb inside v1.8

Rapid share link:

MT_SE_Suite_v1.1.exe ([Only registered and activated users can see links])

24.10.2009 - MT Box SE - DB2020 inside v7.0

Release notes:
New supported model w205
New Locosto loaders added

Rapid share link:

Download DB2020_inside_v7.0.exe ([Only registered and activated users can see links])

MT-Box MT SE Suite v1.2 **28-12-2009**

Release notes:

- MT SE suite v1.2 contain all MT box SonyEricsson supported software at one place
- New MT SE software versions for MT Box v2 which have problem: Connection Failed 0002
- Software included in MT SE Suite:

ARM inside v2.3
AVR inside v1.8
C62 inside v1.1
CR 16B inside v1.1
DB2020 inside v7.1
DB3xxx inside v3.8
LG inside v1.5
MT2COM v1.2
New ARM inside v2.9
Sharp inside v1.4
Symb inside v1.9

Download MT SE Suite 1.2 ([Only registered and activated users can see links])

**MT-Box MT SE Suite v1.3 - for box v1 and v2 **25-01-2010**

Release notes:

- MT SE suite v1.3 contain all MT box SonyEricsson supported software at one place
- New MT SE software versions for MT Box v2 which have problem: Connection Failed 0002
- Software included in MT SE Suite:

ARM inside v2.4
AVR inside v1.9
C62 inside v1.2
CR 16B inside v1.2
DB2020 inside v7.1
DB3xxx inside v3.8
LG inside v1.6
MT2COM v1.2
New ARM inside v3.0
Sharp inside v1.5
Symb inside v1.9
MT Box update tool v3.15

Download MT SE Suite 1.3 ([Only registered and activated users can see links])

19.04.2010 - MT Box update tool v3.18

Release notes:
MT Box update tool allows you to:

* To read your MT Box information
* To check what module your box has activated
* To activate available MT Box modules -
* To read your “Box Account” credits information -
* Update your MT Box to latest available version
* To use your MT Box as “PKD-1 dongle” – Nokia service device and run “Phoenix” – Nokia service software
* To go to GT support forum
* Login to GT support
* To read your MT Box serial number – MT Box sn
* To read how many times each MT Box software is started
* To reset your MT Box name to default


MT-Box MT-Tool 3.18 Download Link1 ([Only registered and activated users can see links])

MT-Box MT-Tool 3.18 Download Link2 ([Only registered and activated users can see links])