Here's one book that I think will be of interest to people who are in this field ...

[Only registered and activated users can see links]

Grade 9 Up-Cities, tents, teepees, tunnels, tombs, rapid transit systems, bridges, gardens, cathedrals, skyscrapers, and even a space station are just some of the "feats" included in this authoritative survey. From prehistory to the present, high-tech to low, more than 200 architectural and engineering achievements have been selected that reflect "humanity's propensity to `just do it'- against the odds" and the "social imperatives that stimulated people to push the available technology to its limits." The volume includes articles on structures that are frequent subjects of reports ("Empire State Building," "Great Wall of China") and lesser-known works, as well as selected design movements ("The Bauhaus," "Postmodern architecture") and building technologies ("Curtain walls," "Geodesic domes"). Each alphabetically arranged entry is covered in two pages or less. The book concludes with a poignant, up-to-date entry for the World Trade Center.

History is full of great buildings and structures. Each age and society has harnessed existing technologies and developed new ones to meet the human imperative to build.

The Encyclopedia of Architectural and Engineering Feats presents information about 200 significant structures from antiquity to the present. Items selected for inclusion are not necessarily the largest, but the authors state in the preface that they "have sought to identify those achievements that demonstrate discovery, creativity and innovation." Architecturally significant structures such as cathedrals, dams, train stations, and ancient stone works are included. The data presented are very up to date, including an entry on the building and destruction of the World Trade Center.

Entries contain a page or two describing the historical context, architectural elements, materials used, significance, and, where relevant, recent uses and preservation schemes, followed by a brief list of further readings. Approximately half of the entries are accompanied by black-and-white photos. There are some inconsistencies with cross-references. For example, the entry for Hagia Sofia in Istanbul, Turkey, refers the reader to an entry on the Sultan Ahmet Mosque in the same city. However, the entry on the Sultan Ahmet Mosque refers the reader to the Dome of the Rock in Jerusalem and the Masjed-e-Shah (Royal Mosque) in Isfahan, Iran, but not to Hagia Sofia.

This source is well suited to engineering and architectural students but will also appeal to general readers who may want information about worldwide structures. Emphasizing "biggest," "tallest," and so forth, The Reference Guide to Famous Engineering Landmarks of the World (Oryx, 1997) covers many more structures, though entries are generally shorter. The Encyclopedia of Architectural and Engineering Feats will be very useful in the reference collection and is highly recommended for engineering and architecture collections.

Download Link :

[Only registered and activated users can see links]

password: Mat.Riks.Info

or

[Only registered and activated users can see links] s.rar.html

Here's another one ...

[Only registered and activated users can see links]

Summary:
Book Information:

The Construction of Buildings - Volume 5
Building Services

Third Edition

By: ROBIN BARRY (Architect, formerly of the School of Architecture, South Bank University)
Description

The fifth volume in this classic series of building technology texts covers building services, including water supply and plumbing, drainage, electrical and gas supply.


Table of Contents:

Water supply and distribution;
Sanitary appliances;
Sanitary pipework;
Foul drainage;
Roof and surface water drainage;
Electrical supply and distribution;
Gas supply;
Refuse storage;
Index


"Construction of buildings Volume 5.pdf" (8.97 MB)
[Only registered and activated users can see links]

or

[Only registered and activated users can see links]

And another one ...

[Only registered and activated users can see links]

Wood Handbook: Wood as an Engineering Material
Paperback: 428 pages
Publisher: Forest Products Society (March 1, 1999)
ISBN: 1892529025

Book Description
Since it was first issued in 1935 the Wood Handbook, developed by scientists at the USDA Forest Products Laboratory in Madison, Wisconsin has served as the preeminent source of information on wood and wood products. This 1999 edition of the Wood Handbook reflects a complete revision of the last edition published in 1987, and presents many new chapters on new products and processes. Subjects covered in this 428-page handbook include 1) basic wood and wood product characteristics and properties, 2) various wood manufacturing processes, 3) processes to enhance the performance of wood products, 4) structural design information, and 5) specifications and rules for the proper use of wood products. The Wood Handbook contains nearly 200 figures and over 100 tables.

[Only registered and activated users can see links]
pass: tF

Download immediately while the link is still up!

And my last ebook for today ...

[Only registered and activated users can see links]

Book Introduction

Today, architects and designers are beginning to look toward
developments in new "smart" or "intelligent" materials and
technologies for solutions to long-standing problems in building
design. However, these new materials have so far been applied in a
diverse but largely idiosyncratic nature, because relatively few
architects have access to information about the types or properties
of these new materials or technologies.Two of the leading experts in
this field - Addington and Schodek - have solved this problem by
incorporating all the relevant information of all the latest
technologies available to architects and designers in this one volume
. They present materials by describing their fundamental
characteristics, and go on to identify and suggest how these same
characteristics can be exploited by professionals to achieve their
design goals. Here, the wealth of technical understanding already
available in the materials science and engineering literature is at
last made accessible to a design audience.
* A unique text that outlines the topic of smart materials from a
design perspective
* Learn about the latest research and practice of using smart
materials and gain a better understanding on how to utilize them
architectural design
* Benefit from the knowledge and insight of this experienced and
respected author team.

[Only registered and activated users can see links] rchitecture.Design.Professions.dae9ovr.rar.html

Wow Great! Your kept your word bro. Thanks Great Share!!! DL'ng now.

Engineering Books:ThermoChemical Process - Principles & Models
[Only registered and activated users can see links] 1.59 MB

Engineering Materials
[Only registered and activated users can see links] .___2_vols._.rar 20.40 MB

Metal Foams - A Design Guide
[Only registered and activated users can see links] 3.81 MB

Know & Understand CentrifugalPumps
[Only registered and activated users can see links] _Pumps.rar 5.30 MB

Marine Structural Design
[Only registered and activated users can see links] 8.47 MB

Practical Ship Hydronomics
[Only registered and activated users can see links] ar 1.81 MB

Engineering Mathematics
[Only registered and activated users can see links] .rar 3.79 MB

Computational Fluid Dynamics
[Only registered and activated users can see links] 7.31 MB

Machinery Component Maintenance & Repair
[Only registered and activated users can see links] ce_and_Repair__2nd_ed._.rar 9.65 MB

Major Process Equipment - Maintenance & Repair
[Only registered and activated users can see links] enance_and_Repair__2nd_ed._.rar 13.56 MB

Improving Machinery Reliability
[Only registered and activated users can see links] ty__3rd_ed._.rar 13.91 MB

Designing Capable & Reliable Products
[Only registered and activated users can see links] le_Products.rar 17.21 MB

Gas Turbine Engeering
[Only registered and activated users can see links] ook__2nd_ed._.rar 9.28 MB

Helicopter Dynamics
[Only registered and activated users can see links] ynamics__2nd_ed._.rar 4.94 MB

Metals Reference Book
[Only registered and activated users can see links] Book__7th_ed._.rar 28.86 MB

Light Metals Handbook
[Only registered and activated users can see links] book.rar 1.47 MB

Non-Ferrous Foundryman's Handbook
[Only registered and activated users can see links] 7.12 MB

Ferrous Foundryman's Handbook
[Only registered and activated users can see links] andbook.rar 3.69 MB

Plastics Materials
[Only registered and activated users can see links] _.rar 45.39 MB

Carbon Materials for Advanced Technologies
[Only registered and activated users can see links] ced_Technologies.rar 9.38 MB

Guide to Ship Repair Estimates
[Only registered and activated users can see links] 0.94 MB

Physical Metallurgy
[Only registered and activated users can see links] _3_vols._.rar 57.57 MB

The Coming Materials Science
[Only registered and activated users can see links] e.rar 9.82 MB

Introduction to Space Sciences & Spacecraft Applications
[Only registered and activated users can see links] nces_and_Spacecraft_Applications.rar 3.68 MB

Castings - The New Metallurgy of Cast Metals
[Only registered and activated users can see links] 8.74 MB

Biaxial-Mutiaxial Fatigue & Fracture
[Only registered and activated users can see links] 9.15 MB

Hazardous Chemicals Handbook
[Only registered and activated users can see links] nd_ed._.rar 1.89 MB

Mechanical Engineer's Data Handbook
[Only registered and activated users can see links] dbook.rar 10.74 MB

Metal Machining - Theory & Applications
[Only registered and activated users can see links] 2.42 MB

A Guide to Collision Avoidance Rules
[Only registered and activated users can see links] Avoidance_Rules__6th_ed._.rar 3.10 MB

Plastics Engineering
[Only registered and activated users can see links] ed._.rar 16.60 MB

Ship Stability for Masters & Mates
[Only registered and activated users can see links] and_Mates__5th_ed._.rar 5.00 MB

Fluid Mechanics - Thermodynamics of Turbomachinery
[Only registered and activated users can see links] cs_of_Turbomachinery__4th_ed._.rar 2.67 MB

Fiber Fracture
[Only registered and activated users can see links] 7.58 MB

Carbon Nanotubes
[Only registered and activated users can see links] 6.13 MB

Ship Construction
[Only registered and activated users can see links] ar

The Motor Vehicle
[Only registered and activated users can see links] _.rar

Handbook of Production Management Methods
[Only registered and activated users can see links] nt_Methods.rar

Advance Vehicle Technology
[Only registered and activated users can see links] nd_ed._.rar

Lightweight Electric Hybrid Vehicle
[Only registered and activated users can see links] Vehicle_Design.rar

Advanced Gas Turnie Cycles
[Only registered and activated users can see links] .rar 2.76 MB

Aerodynamics for Engineerng Students
[Only registered and activated users can see links] ng_Students__5th_ed._.rar 9.21 MB

Seamanship Techniques
[Only registered and activated users can see links] ._.rar 20.40 MB

Automotive Quality Systems Handbook
[Only registered and activated users can see links] ook.rar 2.20 MB

ISO 9000 Quality Systems Handbook
[Only registered and activated users can see links] k__4th_ed._.rar 2.64 MB

ISO 9000 2000 - An A-Z Guide
[Only registered and activated users can see links] 0.77 MB

Engineering Rock Mechanics
[Only registered and activated users can see links] 2_vols._.rar 16.01 MB

Aircraft Design Projects for Engineering Students
[Only registered and activated users can see links] for_Engineering_Students.rar 1.97 MB

Failure Analysis Case Studies
[Only registered and activated users can see links] ies_II.rar 8.43 MB

Membranes for Industrial Wastewater Recovery & Re-Use
[Only registered and activated users can see links] er_Recovery_and_Re-Use.rar 5.58 MB

Engineering Interfaces in Fiber Reinforced Engineering
[Only registered and activated users can see links] ed_Composites.rar 6.45 MB

Introduction to Power Fluid Flow
[Only registered and activated users can see links] d_Flow.rar 3.52 MB

Fluid Mechanics
[Only registered and activated users can see links] 20.55 MB

Introduction to Continuum Mechanics
[Only registered and activated users can see links] nics__3rd_ed._.rar 12.18 MB

Project Planning & Control
[Only registered and activated users can see links] th_ed._.rar 7.15 MB

A Guide to MS Excel 2002 for Scientists & Engineers
[Only registered and activated users can see links] 2002_for_Scientists_and_Engineers__3rd_ed._.rar 5.43 MB

Mechanics for Sheet Metal Forming
[Only registered and activated users can see links] ming__2nd_ed._.rar 1.90 MB

Mechanical Engineer's Handbook
[Only registered and activated users can see links] book.rar 15.25 MB

Aeronautical Engineering
[Only registered and activated users can see links] Book.rar 2.00 MB

Beginning Autocad 2002
[Only registered and activated users can see links] 10.85 MB

Modelling with Autocad 2002
[Only registered and activated users can see links] rar 11.71 MB

Marine Auxilliary Machinery
[Only registered and activated users can see links] __7th_ed._.rar 29.69 MB

Aircraft Structures for Engineerig Students
[Only registered and activated users can see links] ngineering_Students__3rd_ed._.rar 19.57 MB

Industrial Control Wiring Guide
[Only registered and activated users can see links] ide__2nd_ed._.rar 1.09 MB

Root Cause Failure Analysis
[Only registered and activated users can see links] rar 10.68 MB

Vibration Fundamentals
[Only registered and activated users can see links] 8.84 MB

An Introduction to Predictive Maintenance
[Only registered and activated users can see links] e_Maintenance__2nd_ed._.rar 2.52 MB

Plant Engineering Handbook
[Only registered and activated users can see links] ar 13.85 MB

Hydroblasting & Coating Steel Structure
[Only registered and activated users can see links] _Steel_Structures.rar 3.29 MB

Metal Fatigue - Effects of Small Defects and Non_Metallic Inclusions
[Only registered and activated users can see links] ns.rar 6.76 MB

The Tribology Handbook
[Only registered and activated users can see links] d._.rar 16.60 MB

Statistical Process Control
[Only registered and activated users can see links] __5th_ed._.rar 2.20 MB

The Material Science of Thin Films
[Only registered and activated users can see links] ilms.rar 20.35 MB

Tyre Mechanics & Vehicle Dynamics
[Only registered and activated users can see links] Dynamics.rar 6.64 MB

Rules of Thumb for Mechanical Engineers
[Only registered and activated users can see links] Engineers.rar 18.11 MB

Basic Ship Theory
[Only registered and activated users can see links] _2_vols._.rar 7.08 MB

The Automotive Chassis - Engineering Priciples
[Only registered and activated users can see links] 12.61 MB

Understanding Automotive Electronics
[Only registered and activated users can see links] ectronics__5th_ed._.rar 16.51 MB

Safety at Work
[Only registered and activated users can see links] 8.76 MB

Plastics Engineered Product Design
[Only registered and activated users can see links] Design.rar 9.44 MB

Robotics - Designing the Mechanisms for Automated Machinery
[Only registered and activated users can see links] _2nd_ed._.rar 9.25 MB

Ship Design for Efficiency and Economy
[Only registered and activated users can see links] _and_Economy__2nd_ed._.rar 1.37 MB

Methods for Monitoring & Diagnosing the Efficiency of Catalytic Converters
[Only registered and activated users can see links] gnosing_the_Efficiency_of_Catalytic_Converters.rar 5.72 MB

Mechanical Engineer's Reference Book
[Only registered and activated users can see links] ce_Book__12th_ed._.rar 34.59 MB

Engineering Tribology
[Only registered and activated users can see links] nd_ed._.rar 9.27 MB

Tribology in Machine Design
[Only registered and activated users can see links] gn.rar 5.63 MB

The Science & Technology of Carbon Nanotubes
[Only registered and activated users can see links] arbon_Nanotubes.rar 3.36 MB

Introduction to Marine Engineering
[Only registered and activated users can see links] eering__2nd_ed._.rar 32.19 MB

Electronic Navigation
[Only registered and activated users can see links] 3rd_ed._.rar 15.58 MB

3D Fibre Reinforced Polymer Composites
[Only registered and activated users can see links] sites.rar 4.88 MB

Refrigeration & Airconditioning
[Only registered and activated users can see links] 3.72 MB

Introduction to Naval Architecture
[Only registered and activated users can see links] ecture__3rd_ed._.rar 17.29 MB

Mechanics & Analysis of Composite Materials
[Only registered and activated users can see links] Composite_Materials.rar 5.57 MB

Practical Ship Designs
[Only registered and activated users can see links] 20.10 MB

TPM - A route to World Class Performance
[Only registered and activated users can see links] 9.35 MB

Marine Diesel Engines & Gas Turbines
[Only registered and activated users can see links] gines_and_Gas_Turbines__8th_ed._.rar 12.53 MB

Practical Design of Ships & Other Floating Structures
[Only registered and activated users can see links] ating_Structures__vol._1_.rar 13.47 MB

Carbon Alloys - Novel Concepts to Develop Carbon Science & Technology
[Only registered and activated users can see links] nology.rar 9.18 MB

The Finite Element Method
[Only registered and activated users can see links] od__5th_ed.___3_vols._.rar 15.96 MB

The Theory & Design of AIr Cushion Craft
[Only registered and activated users can see links] raft.rar 43.99 MB
PS. when copying the url, just incase you didnt notice, don't add the size of the ebook at the end. ^^

wow,just WOW,amazing,i've been looking all over the internet for arch e-books and i couldn't find any,now there are all these ,man,good job, God bless ya

Thx for Sharing

That's Good

Architectural Record Magazine

Architectural Record Magazine 1: [Only registered and activated users can see links]
Architectural Record Magazine 2: [Only registered and activated users can see links]
Architectural Record Magazine 3: [Only registered and activated users can see links]

Very nice sharing bro. Really liked it. Keep going!!

any books on interiors

people,your posts are amazing,but that rapid share is driving me crazy,can u post the older files in megaupload or something else, and i am begging don't post the future files in rapid share.
thanx

I agree rapid share stinks, I always prefer megaupload.

Can anyone help? Need to learn AutoCAD 2006 for a new job. So any help with tutorial files will be most appreciated.

i just look for symbian software and found this great forum for architecture!thx!!!

Can anyone help? Need to learn AutoCAD 2006 for a new job. So any help with tutorial files will be most appreciated.

Here you go ...

AutoCAD 2006 Tutorial eBook : [Only registered and activated users can see links]
Pass: [Only registered and activated users can see links]

[Only registered and activated users can see links]



Download quickly before the link expires! Enjoy!

what application do i need to open the encyclopedia of architectural and engineering feats?

Tol wingtip, i'm looking 4 any tutorial file about autodesk autosketch, any version. I've got this software & found it easy 2 learn in making an ordinary technical drawing.

Thanks KABAYAN!

Tol wingtip, i'm looking 4 any tutorial file about autodesk autosketch, any version. I've got this software & found it easy 2 learn in making an ordinary technical drawing.

Thanks KABAYAN!

Bro, offhand, here's what I can give you for a start ...

[Only registered and activated users can see links]



Autodesk provides a variety of online and printed manuals that help you to learn and use Autodesk AutoSketch 9. These materials are available in several formats

Online Help. The online Help can be accessed directly from the product by choosing Help from the Help menu.
Printed Books. The Getting Started guide is a printed book that comes in the box.
Downloadable Files. You can download some documentation in PDF format. To download a file, click the name of the file in the following table (or right-click to Save As). To view a PDF file, you must have Adobe Acrobat Reader 4.0 or later. To download the Acrobat Reader, visit the Adobe® Acrobat® Reader® ([Only registered and activated users can see links]></b>:void%20window.open('[Only registered and activated users can see links]',%20'viewwin',%20'width=800,height=5 50,scrollbars=yes,status=yes,resizable=yes,toolbar =yes,location=yes,menubar=yes');) web page.Getting Started Guide
The Getting Started Guide provides a quick visual way to learn basic CAD concepts.
Topics included in the Guide are:

An introduction to beginning CAD concepts (making the transition from paper to CAD)
An overview of the AutoSketch interface and tools
A series of tutorialsRight-click, 'save as' to downloade here : [Only registered and activated users can see links] (3,669k kb)

Wing Tip,i really need the book (structure system) by (heinrich engel),can u please upload it ASAP,i would highly appreciated it if it wouldn't be on rapidshare,
Regards...

my apologies for the double post,
mods,delete one of them,(if u don't mind)

very good and very helpfull
thanks alot

And my last ebook for today ...

[Only registered and activated users can see links]

Book Introduction

Today, architects and designers are beginning to look toward
developments in new "smart" or "intelligent" materials and
technologies for solutions to long-standing problems in building
design. However, these new materials have so far been applied in a
diverse but largely idiosyncratic nature, because relatively few
architects have access to information about the types or properties
of these new materials or technologies.Two of the leading experts in
this field - Addington and Schodek - have solved this problem by
incorporating all the relevant information of all the latest
technologies available to architects and designers in this one volume
. They present materials by describing their fundamental
characteristics, and go on to identify and suggest how these same
characteristics can be exploited by professionals to achieve their
design goals. Here, the wealth of technical understanding already
available in the materials science and engineering literature is at
last made accessible to a design audience.
* A unique text that outlines the topic of smart materials from a
design perspective
* Learn about the latest research and practice of using smart
materials and gain a better understanding on how to utilize them
architectural design
* Benefit from the knowledge and insight of this experienced and
respected author team.

[Only registered and activated users can see links] rchitecture.Design.Professions.dae9ovr.rar.html

tnx 4 shareing great books like this
please keep up the good work

the file has been deleted in rapidshare , please reupload
regards.

hi does any one have this book> islam art and architecture by Markus-Hattstein thanks

Caligari TrueSpace Architectural Courses | FileFactory | 112 MB


This architecture design course illustrates how to produce stunning architectural graphics. Learn the modeling principles behind such fundamentals as the classical pillar and arch. Investigate methods of applying textures and tackle a range of lighting tasks.



[Only registered and activated users can see links]
[Only registered and activated users can see links]


Note : I havnt tested this, but found it helpful for u guys...

Walter Lee Sheppard, «Corrosion and Chemical Resistant Masonry Materials Handbook»
ISBN: 0815510535 | Publisher: Noyes Publications | Publication Date: 1986-08-01 | Number Of Pages: 722 | PDF | 18,5 MB

Book Description
This information packed volume describes corrosion and chemical resistant masonry materials necessary for buildings and equipment requiring such materials. Written by 40 authorities, it covers a broad variety of materials, from structural materials, membranes and lining systems, to inspection and failure analysis. This will enable practicing engineers and architects to write specifications and instructions, and draw details, for proper installation of such masonry materials and equipment. It will also be of use to a wide variety of manufacturing and chemical process industries.

[Only registered and activated users can see links] dbook_muyac.rar

David Highfield, «The Construction of New Buildings Behind Historic Facades»
ISBN: 041915180X | Publisher: Spon E & F N (UK) | Publication Date: 1991-06 | Number Of Pages: 160 | pdf | 6,6 mb


Facade-retention schemes are being used more and more as a means of providing modern accommodation for commercial and industrial buildings in conservation areas and city centres. This book is the first authoritative guide to this highly complex technique and deals with the key issues associated with building behind historic facades. It explains the criteria that should be used by architects and others in developing successful designs, and gives an insight into the technical problems. It includes comprehensive descriptions of eight recent schemes, illustrated by numerous detailed drawings and photographs.

[Only registered and activated users can see links] des_muyac.rar

Construction of Buildings, Vol. 1 Foundations and Oversite Concrete, Walls, Floors, Roofs 7ed
ISBN 0632052619 | Blackwell Science, 1999 (14.13 Mb)
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Construction of Buildings, Vol. 2 Windows, Doors, Fires, Stairs, Finishes 5ed
ISBN: 0632050926 | Blackwell Science, 1999 (9.48 Mb)
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Construction of Buildings, Vol 3 Single Storey Frames, Shells and Lightweight Structures 4ed
ISBN: 0632037423 | Blackwell Science, 1999 (7.21 Mb)
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Construction of Buildings, Vol 4 Multi-storey Buildings, Foundations, Steel Frames, Concrete Frames 4ed
ISBN: 0632039116 | Blackwell Science, 1999 (10.93 Mb)
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Construction of Buildings, Vol 5 Building Services 3ed
ISBN: 0632049324 | Blackwell Science, 1999 (8.31 Mb)
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

any history of architecture books?
tnx

hello wingtip!!

do you have any ebooks for marine deck officer reviewer or seamanship reviewer?
hope you can help me find one..
thanks in advance

Hey buddy look in the following thread, it may help u
[Only registered and activated users can see links]
Also u will find some marine engineering ebooks at Engineering Ebooks thread...

thanks! buddy..

matur nuwun, terima kasih, thanks very muchh

magandang araw po sa inyong lahat (goor day to everybody). its a pleasure to be at this website. Thanks to Wang Tip for his "tip".

[Only registered and activated users can see links] ([Only registered and activated users can see links])

TITLE : Introduction to AutoCAD 2008: 2D and 3D Design (Paperback)

AUTHOR : by Alf Yarwood (Author)

PUBLISHER : Newnes publisher

ISBN : 0750685123

EDITION : 1st

PUB DATE : June 25, 2007

LANGUAGE : English

RLS DATE : 09/28/2007





Taking the reader step-by-step through the features of AutoCAD, Alf

Yarwood provides a practical, structured course of work matched to the

latest release of this software. After introducing first principles and

the creation of 2D technical drawings, he goes on to demonstrate the

construction of 3D solid and surface model drawings and rendering in the

second part. All the new features of the 2008 software release are taken

into account, in particular the new workspace for 2D drafting, faster

rendering, new rendering methods, more materials, and improved lighting

methods. The 2D chapters are also suitable for those learning how to use

AutoCAD LT 2008. Introduction to AutoCAD 2008 includes:



- Hundreds of full-colour drawings and screen shots illustrating the

stages within the design process

- Worked examples and exercises throughout the text, linking the use

of AutoCAD to real-world engineering practice

- Start of chapter learning outcome summaries and end of chapter

revision notes and exercises to check the readers' understanding Readers

can also visit a free companion website at

[Only registered and activated users can see links] where they will find

worked solutions and AutoCAD drawing files of stages and results for the

exercises in the book, as well as further exercises and multiple-choice

questions with answers. Suitable for all new users of AutoCAD, this book

is particularly applicable to introductory level undergraduate courses

and vocational courses in engineering and construction. Further

Education students in the UK will find this an ideal textbook to cater

for the relevant CAD units of BTEC National and BTEC Higher National

Engineering schemes from Edexcel, and the City & Guilds 4353 and 2303

qualifications.



* Written by a member of the Autodesk Developer Network

* Hundreds of full-colour drawings and screen shots illustrating the

stages within the design process

* Accompanying website with worked solutions and AutoCAD drawing files

of stages and results for the exercises in the book, as well as further

exercises and multiple-choice questions with answers


[Only registered and activated users can see links]

Guys I just wanted to ask if anyone of you has tutorial or manual of Autodesk Revit 2008 ver. and Autodesk Viz 2008 ver. Any post would be a great help for me and to anyone whois in this field of business.

Thanks in advance.

bigfreakke
Re: eBooks on Architecture & Engineering
Guys I just wanted to ask if anyone of you has tutorial or manual of Autodesk Revit 2008 ver. and Autodesk Viz 2008 ver. Any post would be a great help for me and to anyone whois in this field of business.

Thanks in advance.

try this hope it can help
[Only registered and activated users can see links]

any 1 here who have a ebook about c0nstructing miniature scale m0del of houses? Thanks in advance. .

@wingtip

sir do you have an ebook on 3dmax 9? thnx

[Only registered and activated users can see links]

Publisher: Sybex
Language: english
Paperback: 527 pages
Data: April 9, 2007
Format: PDF
Description: Video game and feature-film artists have used 3ds Max to create Halo 2, King Kong, Myst V, and more. Now you can harness this popular animation software with the clear, step-by-step instructions in this easy-to-follow guide. This book breaks down the complexities of 3D modeling, texturing, animating, and visual effects. Clear-cut explanations, tutorials, and hands-on projects help build your skills and a special color insert includes real-world examples from talented 3ds Max beginners.

Copyright Disclaimer:
Contents of this page are from the Internet, the copyright belongs to the original page. Check the original page for copyright statement. All actions are under your responsability, please delete them after 24 hours or purchase it. Email us to report illegal contents.

[Only registered and activated users can see links]

hi,good morning sir,mybe you can upload to the other site same as mediafire,bec. in rapidshare i cannot download and also megaupload it is being blocked here!And i really want to have a copy of the book sir!!!!thnk you

:evilplan:Neufert Ernst and Peter-Architects

Classical lecture of the architecture

Download:

[Only registered and activated users can see links] 1.rar

[Only registered and activated users can see links] 2.rar

[Only registered and activated users can see links] 3.rar

i hope somebody wil upload it on zendfile.. thanks in advance

all the books look great, pls somebody upload in zendfile

Hello u uploaded nice books collection kindly can u upload book for automotive
named

Automotive mechanics 10 edition by William H. Course

and also mail this book download like to my email address

[Only registered and activated users can see links]
[Only registered and activated users can see links]

Thanks in advance

Hi there, im an Architecture student from PUP (Polytechnic University of the Philippines, i just downloaded some of ur collection... thanks, it realy helps a lot...

keep up...

here is all your dream archi e books and magazins [Only registered and activated users can see links]

Hye,

Can somebody help me out with the following book:
The Construction of Buildings - Volume 4 By: ROBIN BARRY

or other references dealing with (short) history of reinforced concrete structures, reinforced concrete frames and pre-cast reinforced concrete structures?

Thank you in advance!!!!!!!!!!