[Only registered and activated users can see links]

Socket Wi-Fi Companion is an intuitive and graphical utility that displays your connection properties at a glance. There’s even a Power Save utility, so you can adjust the power settings when using battery power.

[Only registered and activated users can see links]

Basic features:
Wi-Fi Companion provides users with a friendly, easy-to-use interface to manage WLAN connectivity. The main page icons provide single tap access to browse the web or check email, find WLANs in range, install security certificates, view IP addresses or modify profiles.

Wi-Fi Finder
Find Wi-Fi hotspots in range.

Get Connected
Connect to wireless networks securely with a single tap.

Power Save
Manage power save settings to maximize battery life of Windows Mobile devices.

Security
Works well with all WLAN security protocols supported by Windows Mobile (WPA, WPA-PSK, 802.1x, 40/128-bit WEP, Open).

Persistence Connectivity
Connect to Wi-Fi networks quickly and stay connected to the right network.

Ping Utility
Check network connectivity and survey your network range.

Trace Route Utility
Check each hop in your connection to the Internet to see where delays occur.

New features supported in this release:

Windows Mobile 2005 device with Landscape support
Square screen support for Windows Mobile devices


Installed & tested on O2XDA IIi-passed! (see my screenshots above & below) :)

[Only registered and activated users can see links]

Install Note:

V2.8.19.0- Install the application, after that copy cab file to device below according to your Device OS
Please use cab file, wtme.2.8.wm5.armv4i.dim_soft.rar for WM5 & WTME.PPC2003ARMV4cracked.rar for WM2003, special thanks to fallen & dim_soft, run cab file in device
use serial number 02873 to register

the reg key is invalid :cry:

the reg key is invalid :cry:

your device? OS? got mine registered, no problem..wm03se ..others having same problem?

make sure u installed the app, then copy the correct cab file (according to respective os) to device (what i did, installed it to storage card, run the app on trial first, then exit, later copy the cab file to storage card, run the same, when asked to reinstall, click yes.. then run the app again, enter the sn..got it registered & running...see screenshots above)

well...gonna uninstall and try again

mine got registered too,

device HP 6965 - WM5
good app

netarchie

Works perfect ! Ouf ! The previous version s|_|cked :P

Wonderful Apps. Works on my wizard.

well ... it works perfectly.
it was my mistake. :win: :partyman: :rock:

working perfectly on my Dopod 818 pro.. thx..

well ... it works perfectly.
it was my mistake. :win: :partyman: :rock:

glad to hear that it works for u..enjoy! ;)

Updated to v2.9 (2.9.3.0) for WM03 & WM05

[Only registered and activated users can see links]

Notes:
- Get the compatible file with your device WM03 or WM05 below
- First install the cracked v2.6.0.0 attached. Read the instruction to crack it.
- After cracked the v2.6. Soft reset device.
- Install v2.9 (2.9.3.0) overwrite v2.6
- Done & enjoy.

Connect faster than previous version.:weedman:

I have one question. how to clear the notification at the btm left of the screen. I cant seem to exit it unless i switch off my wifi.

Updated to v2.9 (2.9.3.0) for WM03 & WM05

[Only registered and activated users can see links]

Notes:
- Get the compatible file with your device WM03 or WM05 below
- First install the cracked v2.6.0.0 attached. Read the instruction to crack it.
- After cracked the v2.6. Soft reset device.
- Install v2.9 (2.9.3.0) overwrite v2.6
- Done & enjoy.

Connect faster than previous version.:weedman:


rep added.. good update! :)

Works great on my Ipaq 6915, thanks

I tried all 5 variations and all the tips here but could not get it regged or sometimes got error messages like "One or more components of Wi-Fi Companion were not found...". Can someone please put clear step-by-step instructions please? And which of the downloadable files (versions) to use. Thanks.
:oops:

Btw. The latest version of the 3 day demo works fine on my MDA Vario but the serial does not.
:cry:

For me the v2.8 by kleiner_fr from...
[Only registered and activated users can see links]
is working ok at the moment... I did say "at the moment", will let you know if anything happens.
:lol:

Updated to v2.9 (2.9.3.0) for WM03 & WM05

[Only registered and activated users can see links]

Notes:
- Get the compatible file with your device WM03 or WM05 below
- First install the cracked v2.6.0.0 attached. Read the instruction to crack it.
- After cracked the v2.6. Soft reset device.
- Install v2.9 (2.9.3.0) overwrite v2.6
- Done & enjoy.

Connect faster than previous version.:weedman:

UPDATE: Cracked, install with serial no. No need install 2.6.0. :supz:

What is the RAR password?
/Chappe

installed on my ETEN M600, works great the 1st time, then after turning off Wifi and starting again, it does not work. Only shows my PDA ?

pity as it seems a great program

Good question... what's the rar password?

Sorry, rar password removed.

I tried all 5 variations and all the tips here but could not get it regged or sometimes got error messages like "One or more components of Wi-Fi Companion were not found...". Can someone please put clear step-by-step instructions please? And which of the downloadable files (versions) to use. Thanks.
:oops:

Btw. The latest version of the 3 day demo works fine on my MDA Vario but the serial does not.
:cry:

For me the v2.8 by kleiner_fr from...
[Only registered and activated users can see links]
is working ok at the moment... I did say "at the moment", will let you know if anything happens.
:lol:

I'm also having the same problem.

And the new Wi-Fi Companion v2.9.3.0 does not work for me too on a MDA Vario.

It´s great app for daily use in my ipaq , thank for yours :win: opinion

I am also having the same problem:???:
I tried many variations but always get the same error "One or more components of Wi-Fi Companion were not found...".

Device : O2 Atom
OS: WM5

I tried all 5 variations and all the tips here but could not get it regged or sometimes got error messages like "One or more components of Wi-Fi Companion were not found...". Can someone please put clear step-by-step instructions please? And which of the downloadable files (versions) to use. Thanks.
:oops:

Btw. The latest version of the 3 day demo works fine on my MDA Vario but the serial does not.
:cry:

For me the v2.8 by kleiner_fr from...
[Only registered and activated users can see links]
is working ok at the moment... I did say "at the moment", will let you know if anything happens.
:lol:

HEY GUYS I GOT THE SOLUTION FOR WM5

Step by step
1. Download that
[Only registered and activated users can see links]

2. Install application 2.8, wait installation procedure that brings up WiFi Companions window to front, play with menus, application will ask you serial... write down 02873. Check for "Thank you" message :p

3. Exit application, exit setup and reset device.

4. Download that
[Only registered and activated users can see links]

5. Send cab file to PPC, double click on PPC and install over old version that we installed before... Wait for applications main window, exit, exit setup

6. Soft-Reset device

That worked for me... For you?

xseaplus thnaks, it works perfect now, just to bad noone got an uncrypted network around where I live xD

Thank you I will try that too.

The point is playing with menus at setup (at the end of setup, application shows its user face, play with menus until registration screen appears, then write serial at version 2,8 and then quit setup and reset), and reseting after each installation...

Thank you I will try that too.

It's very handy app! Thanx

Hi kipi
I followed your instruction to install this great program on my i-mate K-JAM.
It's working perfect and register without any hickups. Thanks for a lot.:ilove:

Hi kipi
I followed your instruction to install this great program on my i-mate K-JAM.
It's working perfectly and register without any hickups. Thanks a lot.
:ilove: :win:

its still not working, as i install v.2.8 and try to run the app without restarting, it says "one or more components missing". then i restart device, the application runs this time but the register window does not comes up, no matter how long i play with menus.....device i-mate K-JAM

Its installing but not running for me. It says "One or more components of Wi-Fi Companion were not found, or there are too few resources available to start program". This is after i installed 2.8 & 2.9.
Im using a 8125. Any help with this would be appreciated.


Also, Is Wi-Fi Companion better than WiFiFoFum???

installed it on my htc p3300 works great what a fantastic tool for the networks thanks :)

The latest posting by lightsabre, the one without having to install the previous version works on my Dopod 818Pro. Great Posting, Thanks!

excuse me! who can tell me how to get cab file of wm2003 for socket wi-fi companion?

excuse me! who can tell me how to get cab file of wm2003 for socket wi-fi companion?:cry:

it works like a charm with my XDA IIi

point added for you , man, thank you . .

Can you install this app on the SD card?? After i install it on the SD card, it will not start up.

Can you install this app on the SD card?? After i install it on the SD card, it will not start up.

Yes it can. I installed it on my SD and it works fine.

Well when i installed it on my SD card, it didnt even create a shortcut in the programs folder. The only thing i see it did was create a "Windows" folder on my SD card with 2 files in it. A dll & an exe file. I tried to start the exe but it did nothing.

anyone got this working on dopod 838pro

it is working well bro thx a lot

Qtek 9100, works here aswell :)

it seem useful for my Acer N50

Socket Wi-Fi Companion ver. 2.10.4

[Only registered and activated users can see links]

Socket Wi-Fi Companion ver. 2.10.4

[Only registered and activated users can see links]

the serial is a cd key. when i try to register it on thier website its already register. we need a key generator on this new version.

anyone got this working on dopod 838pro

Yes v2.9.3.0 work but v 2.10.4 fail to find any wireless network

Very Nice File.......!!!!!!!!!!!!!!!!!!!

must spread.. thanks

Is this really for smartphones? It installs well but then I can't do anything.
Anyone?