GUI v0.91380043

- added usercode reset for db2020 phone.
requires server credits.

how to use - two way

first way good when doing only usercode reset
- check "use server".
- select correct model
- press unlock. usercode will be resetted to 0000

second way good when flashing.

- check "use server"
- check "unlock after flash"
- check "complete phone" if you need it
- select correct model
- press flash. phone will be flashed and user code will be resetted to 0000

support site not workink or corrupt.where to down load new verssin 43

I just got my SE Tool 3 Box today.. I registered at the support download part and cant download anything.

Is there any other place I can download??

I would also like to request a SE Tool Box 3 Manual as I didnt find it anwyhere on the site.

Thanks

please tell me how to unlock sonyericson Z300 by SEtool3, thank you very much!

http://www.setool3-box.org/main.php

By the way, how to obtain credit of the ver *****43?
and how to unlock model db2020?????
Its really confuse me when using the ver ****36 is more stable than the latest by flashing the model like K750i, W800i, W550i and W810i!!

GUI v0.91380044


interim fixup release.

- added support for z300/j220/j230 renesas flash (mfgid:1c)
- script with files references now must correctly executing from any directory
- simlock codes now random during unlocking
- countless internal tunings/fixups/preparations

ps.
in few days new tab will became active

GUI v0.91380045

interim fixup release.

- cosmetic addons, like "unused" buttons disabled now when needed
- CID change lower than original and color change if OTP locked prohibited.
- critical bug fixed - on all sibley based phones, if you set "unlock after flash" and "complete phone" - gdfs startup was stalled. thx to vasilius for reporting and help in finding and eliminating bug.
- added several gdfs in bin format.
- other internal updates.
- m600/w950 support will be ready really soon....

@jimmtlp,how about sp lock on db2020 has still has got no soln even on server credits?

GUI v0.91380046

interim fixup release.

- cosmetic addons, like "unused" buttons disabled now when needed
- CID change lower than original and color change if OTP locked prohibited.
- critical bug fixed - on all sibley based phones, if you set "unlock after flash" and "complete phone" - gdfs startup was stalled. thx to vasilius for reporting and help in finding and eliminating bug.
- added several gdfs in bin format.
- other internal updates.
- m600/w950 support will be ready really soon....

ps.
045 version has bug with unlock, need to sleep a little sorry.

is this official setool product supporter original post??? if so please pm me i need to know something about setool

which is official site?? setool.net or setool-3.org ????

Hi all, Please excuse me if I am in the wrong place, but I am in need of help.

I went to use a SE Tool Box 3 on a SE K750i Cid 49, and now it is dead. I understand that I need a file named R1CA021_CXC1250036_EU_3_CL. I cannot find this even on the original site and would appreciate any help on how to resolve this matter asap.

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35XXXXXXXXXXX CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1CA021_CXC1250036_EU_3_CL
Restore from:R1CA021_CXC1250036_EU_3_CL
can't open file "D:\Documents and Settings\PC WORLD.SN049670320054.000\Desktop\SE Tools 3 Main Software\GUI_v0.91380047\rest\R1CA021_CXC1250036_E U_3_CL"
Setting up gdfs...
Clearing total time...
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "70576187"
Signing...
control keys complete.
full sig complete.
Unlock Done
Elapsed:35 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35XXXXXXXXXXX CERT:RED
FLASH CID:36 COLOR:RED



Kind Regards
SARGE

GUI v0.91380060.rar

please tell me how to unlock sonyericson Z300 by SEtool3, thank you very much!

just select model, click unlock/repair button, u will get codes, nck codes (write down this code in case for step 5 below), then follow this:

1=insert sim into phone

2=on phone

3=u know the 'cursor keys' on the keypad, just press < * * <

4=enter on 'network' the NCK codes read by setool3.

Note: if 'personalise' window appears behind 'insert correct sim card' window on LCD, redo < * * < and u will see window with network option, then u then select 'network' then enter codes and press ok

5=unlock is done in step 4. Also note, if phone somehow relock again, just use NCk code read during unlocking process, and follow instructions above.

good luck
kool

Hi all, Please excuse me if I am in the wrong place, but I am in need of help.

I went to use a SE Tool Box 3 on a SE K750i Cid 49, and now it is dead. I understand that I need a file named R1CA021_CXC1250036_EU_3_CL. I cannot find this even on the original site and would appreciate any help on how to resolve this matter asap.

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35XXXXXXXXXXX CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1CA021_CXC1250036_EU_3_CL
Restore from:R1CA021_CXC1250036_EU_3_CL
can't open file "D:\Documents and Settings\PC WORLD.SN049670320054.000\Desktop\SE Tools 3 Main Software\GUI_v0.91380047\rest\R1CA021_CXC1250036_E U_3_CL"
Setting up gdfs...
Clearing total time...
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "70576187"
Signing...
control keys complete.
full sig complete.
Unlock Done
Elapsed:35 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35XXXXXXXXXXX CERT:RED
FLASH CID:36 COLOR:RED

Kind Regards
SARGE

bro, download latest flash file from support zone, then flash phone: flash + complete (ticketed on setting), after flashing pls dont hit 'unlock/repair' button, just unplug phone, remove battery and put back and then turn it on, see what u will get and post result.

from practical flashing attempts experiences on this model, may be expert will know more and may help effectively.

cheers

Hi, My Name Is Ximena I Cant Install Setool 3 Because The Hardware Assistant Says "cant Find Uc-10 Usb Composite Device" Please Someone Can Tell Me Where Find This??
Thanks, Ximena

Guys, Can setool use for m600?

Hi To Setool3 User Unlocking For Setool3 Is Also Limited Cause For Unlocking Of Db2020 U Have To Buy Log From Server And Now The Server Is Down How Can We Unlock The Phone

Hi Bro Setool3 Can Use For M600 But What Do U Wan To Do With It For Flashing Or Unlock As For Flashing U Just Need To Find The Flash File But U Will Still Need To Buy Log To Unlock Ur Phone After Flashing

thanks...:ilove:

Hi To All!! I Have Setool Dongle Which I Buy It Here Last Year.and Because It Was Not Yet Been Tested By Me,and I'm Just A Begenner To This Device I Really Don't Know How To Activate This.i Have Downloaded The Manual,gui,drvrs,supporter,is This Could Be Used On My Dongle Or For Box Only???any Help Or Tips Much Appreciated,thanks...

Can i have the SE Tool. My email address is luharfarhad@yahoo.com plizzzzzzzzzzzzzzzz

@UFS-3â
how to flash/unlock siemens c62 with se3 tool cause i do not see anything in the siftware if there is a screen shot or full picture layout

Hi !! I have the setool3 box with the last version gui. 96 and buy credits but not unlock w850 cid 51.
First not have the restore file RIKC001 prgCXC1250200_GENERIC_CY, I can´t find in the support.
Second i try flash but say me "PHONE CID NOT SUPPORTED IN THAT MODE"
The server conection it´s ok.
please some help me...:oops:

hi iam a bit new to this i need to get se3 box driver but i carnt download it from the web site for some resone can any one help thanks in adv

great!!!


interim fixup release.

- added support for z300/j220/j230 renesas flash (mfgid:1c)
- script with files references now must correctly executing from any directory
- simlock codes now random during unlocking
- countless internal tunings/fixups/preparations

ps.
in few days new tab will became active[/QUOTE]

:???:

script for Cid 49 - 51 ....unlock free ?