You can download with this two following links, newest firmware for N93-RM55 EMEA to upgrade by yourself with nokia phoenix.
You must download both parts of the archive before to uncompress them.

Part 1 ([Only registered and activated users can see links])

Part 2 ([Only registered and activated users can see links])

Password of rar file is :
[Only registered and activated users can see links]

Enjoy !

it can't file the file at the website.

you can't direct download from rapidshare... try add .html from the link above like [Only registered and activated users can see links]

then click "FREE", wait about 1 minute, enter code and start download

has anyone download the files successfully yet. i've tried for the last 2 days and it not letting me download it. i enter the number and click download then it says invalid session.

Having testing today (10 november), rapidshare runs correctly.
You must check firewall, antivirus and other anti-popup to use rapidshare.
Hope it can help.

is there the APAC ver??

has anyone download the files successfully yet. i've tried for the last 2 days and it not letting me download it. i enter the number and click download then it says invalid session.


invalid session mean:

after you click on the download link above, you click on "FREE", then you will see the time countdown, when the time till 0 sec you'll see the code

here the problem you got cos after you see the code you didnt enter it immediately

the download link after you enter code will be change time to time, so you've to finish it 1 shot, cant download later...

I've entered the code and it says invalid session. i've downloaded before from rapidshare and i haven't made any problems until this one. i've taken off firewall and adware too.

very thanks...

RM-55 Phone Data Package EMEA v3.0
==================================

Important!
----------------------------------------
*NOTE Phoenix Service Software 2006.18.0.227
and Prommer (FPS-10) SW (Flash Update package 006.022.021).
Please read the flashing guide related to this release!

***NOTE Close Phoenix before starting uninstallation or installation
of Data Package. REMOVE THE PREVIOUS VERSION OF DATA PACKAGE BY GOING
TO START MENU->CONTROL PANEL->ADD/REMOVE PROGRAMS, THEN UNINSTALL
RM-55 PHONE DATA PACKAGE.

Software version
-----------------------------------------
- APE SW 20.0.058
- CMT SW 05wk47v35.1
***NOTE We merged CMT SW to the Core Image

Requirements
-----------------------------------------
- Phoenix Service Software 2006.18.0.227
- Prommer (FPS-10) SW (Flash Update package 006.022.021)
Or USB cable (DKU-2) for USB flashing


Included files
------------------------------------------
Core:
- RM55PE200058.C0 Core

- RM55PE200058.V01 Euro-01

0523536 RM-55 Custom TX EUR A Pearl Black
0523601 RM-55 Custom TX EUR A Aluminum Grey
0531236 RM-55 Custom TX FRANCE Pearl Black
0531237 RM-55 Custom TX ALPS Pearl Black
0531254 RM-55 Custom TX FRANCE Aluminum Grey
0531255 RM-55 Custom TX ALPS Aluminum Grey


- 8495417_V3.00.fpsx Euro-01 User Data Area
- RM55PE200058.V02 Euro-02

0531238 RM-55 Custom TX EURO 2 Pearl Black
0531239 RM-55 Custom TX TURKEY Pearl Black
0531240 RM-55 Custom TX SOUTH AFRICA Pearl Black
0531256 RM-55 Custom TX EURO2 Aluminum Grey
0531257 RM-55 Custom TX TURKEY Aluminum Grey
0531258 RM-55 Custom TX SOUTH AFRICA Alumin.Grey

- 8495418_V3.00.fpsx Euro-02 User Data Area
- RM55PE200058.V03 Scandinavia

0531241 RM-55 Custom TX SCANDINAVIA Pearl Black
0531259 RM-55 Custom TX SCANDINAVIA Alumin. Grey

- 8495422_V3.00.fpsx Scandinavia User Data Area
- RM55PE200058.V04 Baltian

0531242 RM-55 Custom TX BALTIAN Pearl Black
0531260 RM-55 Custom TX BALTIAN Aluminum Grey
- 8495423_V3.00.fpsx Baltian User Data Area

- RM55PE200058.V05 Russian

0531243 RM-55 Custom TX RUSSIAN Pearl Black
0531244 RM-55 Custom TX UKRAINE Pearl Black
0531245 RM-55 Custom TX CIS BULGARIA Pearl Black
0531261 RM-55 Custom TX RUSSIAN Aluminum Grey
0531262 RM-55 Custom TX UKRAINE Aluminum Grey
0531263 RM-55 Custom TX CIS BULGARIA Alumin.Grey

- 8495425_V3.00.fpsx Russian User Data Area

- RM55PE200058.V06 Euro-03
0531246 RM-55 Custom TX EURO3 Pearl Black
0531264 RM-55 Custom TX EURO3 Aluminum Grey

- 8495429_V3.00.fpsx Euro-03 User Data Area

- RM55PE200058.V07 Balkans

0531247 RM-55 Custom TX BALKANS Pearl Black
0531249 RM-55 Custom TX GREECE CYPROS P. Black
0531265 RM-55 Custom TX BALKANS Aluminum Grey
0531267 RM-55 Custom TX GREECE CYPROS Aluminum Grey

- 8495435_V3.00.fpsx Balkans User Data Area

- RM55PE200058.V08 Arabic

0531250 RM-55 Custom TX LEBANON Pearl Black
0531251 RM-55 Custom TX GULF Pearl Black
0531268 RM-55 Custom TX LEBANON Aluminum Grey
0531269 RM-55 Custom TX GULF Aluminum Grey

- 8495437_V3.00.fpsx Arabic User Data Area
- RM55PE200058.V09 Hebrew

0531253 RM-55 Custom TX ROMANIA Pearl Black
0531271 RM-55 Custom TX ROMANIA Aluminum Grey

- 8495438_V3.00.fpsx Hebrew User Data Area

Tuning ini/xml files:

- rfconf_RM-55.xml
* allows user to align product's RF part automatically

- rm_55_tunings.ini
* specifies some TX Power Level tuning targets for RM-55

- rm_55lbl.ini
* specifies the label print settings

- Label files (*.pcx)
* 040-019073V04.pcx
* 040-019074V02.pcx
* 040-019075V02.pcx
* 040-019076V02.pcx
* 040-019077V01.pcx
* 040-019078V01.pcx
* 040-019079V02.pcx
* 040-019080V02.pcx
* 040-019081V02.pcx
* 040-019082V01.pcx
* 040-019083V01.pcx
* 040-019084V02.pcx
* 040-019086V01.pcx
* 040-019087V02.pcx
* 040-019270V02.pcx
* 040-020320V02.pcx
* 040-031876V02.pcx

Phoenix components configuration files:
- adcreadings.ini
- audiocontrol.ini
- bluetooth.ini
- camera_control.ini
- factoryset.ini
- fmradiocontrol.ini
- ledcontrol.ini
- phoneinfo.ini
- rm_55displaytest.ini

- readme.txt (this file)

Date: 23-Oct-2006

Copyright © Nokia Corporation. All rights reserved

worked fine for me and updated successfully - thanks a lot!!

hmm i can't update my n93, when i install and crack phoenix, and connect phone to PC, and go to flash -> update there is no N93 on the list. only says RM-55, also i can't choose language... nothing, can't eaven fash it... don't know why...

Is there a hack to use this with the Nokia Software Updater?

Change logs:
- Improvements to Auto power off, reset cases
- CellMo baseline update
- Gallery/Camera primary use improved
- UI jerkiness corrections included for Camera, Gallery and RealOne player
- Initialization/startup time, improved to 2 ~ 3 sec
- Shot-2-shot time, 2.17 Sec
- Optical Zoom noise reduction algorithm updated to vary according tobackground noise level.
- Stability/Reliability improvements added.
- Product mode, UI jerkiness improvements
- A few Applications fixed for mode switch errors
- Bluetooth headset IOP/Audio improvement seen in BH-900, BH-800 fixed :
- Bluetooth SAP profile errors corrected so that N616 works.

Improvements and changes:
- Download! (contains Catalogs)
- WLAN Wizard
- Internet Folder added in position 9 on main menu, containing
- Web (OSS Browser) , moved Office folder in 11.0.034
- Access Point Configurator (APC) is replaced by Startup Settings Ver 1.
- Search
- Zip manager is added to position 5 in Office folder.
- Clock is moved from top level menu to My Own folder, position 1.
- Home network application in Connectivity folder is updated to include setup wizard option to make it easier to configure UPnP.

Minor Changes:
- Camera mode switching: Modes spec updated so that when changing from imaging mode to any other mode with camera still active the UI returns toidle screen rather than activate the sub-camera.
- Cover UI to not lit backlight as music clip change: Disabling backlight at music clip change to save battery power.
- Support for Display Headset HS-69 is added.
- Max no of Sent SMSs saved: change the maximum number of SMSs saved in "Sent" folder to 100. (for PRC variant only)
- UMTS in Network mode selection: UMTS is selectable in the UI for Networkmode selection. Tools/Settings/Network mode/ Dual, GSM, UMTS. (not inPRC variant)
- PRC Default Boot Up Language: Default UI Language at 1st boot up isSimplified Chinese (not Automatic).
- QuickOffice version is updated - allows end-users can buy a license for editors and activate them in their device if they so wish.
- Optical zoom reset by still/video capture mode switch: Zoom level is reset to 1.0x at capture mode change for smooth transition.
- In line with July 1, 2006 , GSMA (GSM Association) mandate A5/2 cipheringis no longer supported by default.

One last word before you begin updating: BACKUP ALL YOUR PERSONAL DATA! If you don't, no one will be responsible for your loss!

how to upgrade?????? there is no way to upgrade this...

ohh please some one post the APAC ver :prayer:

You will get your appropriate version if you use the Official Nokia Software Updater... the updates for N93 are currently not available, it should be sometime this week or the next...

still nothing... no one knows when update over NSU will be available, and over phoenix doesn't work...

[Only registered and activated users can see links] ([Only registered and activated users can see links])

this is my problem... anybody can help me?

Mirko BGD,
Have you intsall the latest Nokia Connectivity Cable Driver? Install the latest version since if you have the old version, the N93 will not be recognized.

If you already install the driver, try to restart. Take note: You must c**ck the Phoenix 2006 first since if you are using the none c**ck Phonix version, the app will never start

ohh please some one post the APAC ver :prayer:

You can download it here : [Only registered and activated users can see links]

What is diff between first one and APC N93 RM-55_RD_DP2.0_v3.0_APAC_US_SW20.0.058
?

You can download it here : [Only registered and activated users can see links]

Bro, I have downloaded it 2 times (APAC version) but failed to execute or run the file. Any reasons?

You can download it here : [Only registered and activated users can see links]

repp add to you bro

Got this from Nokia Support:


Dear Updaters

There has been much talk and speculation about the Nokia N93 and the Nokia Software Updater, so here are the facts.

N93 release V2.0 was first made available to the public on 16 October. We monitor update statistics and noticed an unacceptably high number of potential update failures being reported. This was also matched by a high number of posts in these boards about customers claiming to have problems and some ending up with devices which could not be switched on again.

These two factors meant our only option was to disable the product temporarily while investigations took place - that was on 3 November, and our investigations are still continuing. There are technical differences between updating using Nokia Software Updater and updating in a service point - the only problems are updating with NSU.

We are studying ways to rectify the situation in a satisfactory manner, and hope to be able to offer software updates for the N93 in early 2007.

We apologize for the inconvenience, frustration and disappointment caused.

EXE on link does not work, as it is not the full file I think!

I downloaded it, and it does not run either. File size is around 80mb whreas it is supposed to be 180mb

Hm...Download worked for me

Donwloaded it from another location! just google the file name from the EXE that did not work!

Mabe that server is a bit buggy, as it said download complete, although only 80 odd Mb file size.

Updated my phone from 20.xx emea to 20.xxx apac, nice, not chinese characters can be seen on my phone once more, Also do not select APAC-1 for location, otherwise even when you turn off warning tones, camera shutter sounds will still exist. I used Hong kong location, all good

Mazor

Donwloaded it from another location! just google the file name from the EXE that did not work!

Mabe that server is a bit buggy, as it said download complete, although only 80 odd Mb file size.

Updated my phone from 20.xx emea to 20.xxx apac, nice, not chinese characters can be seen on my phone once more, Also do not select APAC-1 for location, otherwise even when you turn off warning tones, camera shutter sounds will still exist. I used Hong kong location, all good

Mazor

Mazor,

Could you post where you got the un-corrupted APAC file from? I am desperately seeking the APAC firmware. Just migrated from N91. Most contacts are in Chinese so with EMEA version I have, I am unable to read them. Thanks in advance!

Hello, just google it!

It takes trial and error


Many sites are closed, or busy, but I had to keep trying, until one would let me download it. In the end one site I did get it from, was too slow, so I cancelled. Downloaded it from a site that previously said it was busy.


To make sure you have not a corrupt one, the download size should be 180mb approx size

MAzor

what is the deffernt between APAC ver and EMEA ver

please advice what i need for my n93 phone

please someone say whats deffernt between them

please someone say whats deffernt between them

One sure thing is the spelling, second one is the way you pronounce them... LOL

EMEA and APAC doesn't have major difference. Most of them are the same but both of them is for dedicated region areas. APAC is for Asia Pacific/ Australia (I guess) while EMEA is for Europe and others... Which means, the language will be different... Correct me if I am wrong....

maybe your right.

and second Question is that which one of these files we have to load by

phoenix?

can some one post the EMEA otherplaces then Rappidshare and if you need an ftp account to upload i will give you

Thanks

someone could re\upload the firmware? the page is still not avaliable...

The firmware you asked I think was uploaded in another thread. But if you just want to upgrade it to this version, why not just use the NSU? It's still the current FW, i guess...

where is the file, in rapidshare says file not found; when i updated trought NSU the phone have many restarts

where is the file, in rapidshare says file not found; when i updated trought NSU the phone have many restarts

I've reloaded my firmware for my N93 and it rarely restart (if ever) so have you tried re-re-installing it? ;)

does n93i has same firmware as n93?? because my phone is n93i and i need chinese firmware

does n93i has same firmware as n93?? because my phone is n93i and i need chinese firmware

I seriously don't think so mate. Have a search for changing your product and you might find some help mate ;)

I won't suggest you to flash ur N93i with N93 firmware.... Suggest that u wait a bit and try to search for any updates of the N93i... There will be one before the official Nokia firmware will be release... Thanks...

Asal nama ko 'si_bangsat'? Selection nama tu kena baikkan sikit yer... Hahahah