[Only registered and activated users can see links]

MagiCall is a tool for bidirectional calls filtering and SMS filtering. With it, you can block unwanted callers, auto hang up on someone bothering you, and more

Requirements:
WM2003 PPC Phone, WM5.0 PPC Phone, 250KB

Last updated: 11-Nov 2006

MagiCall is a smart tool for bidirectional calls filtering and SMS filtering. With MagiCall, you have the ability to block unwanted callers, automatically hang up on someone bothering you, and more! Stop anyone you just don't feel like speaking to at the moment from disturbing you.

Automatically add prefix number in front of the original outgoing call number based on your rule. Hang up predefined outgoing numbers such as international calls. In addition, you can also take control of your incoming SMS Messages. Reply back or send an SMS to someone or launch an application when a rule is being triggered. And it can log detail information about all triggered events to the log file.

Features:

Bidirectional calls filtering
SMS messages filtering
Filters by numbers
Filters by contact/non-contact
Filters by SMS contents
Auto hangs up unwanted calls
Auto delete spam SMS messages
Sends or forwards SMS to one or more numbers
Launches applications
Support landscape and square screen
More...


Thanks to hdf for the released!

:D Enjoy!

[Only registered and activated users can see links]

thanx for the post kipe
it is a must have application

[Only registered and activated users can see links]

MagiCall is a tool for bidirectional calls filtering and SMS filtering. With it, you can block unwanted callers, auto hang up on someone bothering you, and more

Requirements:
WM2003 PPC Phone, WM5.0 PPC Phone, 250KB

Last updated: 11-Nov 2006

MagiCall is a smart tool for bidirectional calls filtering and SMS filtering. With MagiCall, you have the ability to block unwanted callers, automatically hang up on someone bothering you, and more! Stop anyone you just don't feel like speaking to at the moment from disturbing you.

Automatically add prefix number in front of the original outgoing call number based on your rule. Hang up predefined outgoing numbers such as international calls. In addition, you can also take control of your incoming SMS Messages. Reply back or send an SMS to someone or launch an application when a rule is being triggered. And it can log detail information about all triggered events to the log file.

Features:

Bidirectional calls filtering
SMS messages filtering
Filters by numbers
Filters by contact/non-contact
Filters by SMS contents
Auto hangs up unwanted calls
Auto delete spam SMS messages
Sends or forwards SMS to one or more numbers
Launches applications
Support landscape and square screen
More...


Thanks to hdf for the released!

:D Enjoy!

[Only registered and activated users can see links]

I can't install this software. It compatible with WM5 from c-shekhar ROM (xda-developer)

although pocketgear lists it for WM5 I think it only works on WM 2003

working fine with dopod 838 pro... WM5

TQ

strange..it doesn't want to install on my WM5 (ppc 6700) device no matter what I do...did you do anything differently to install it?

Strange, doesn't work on my JasJar WM 5 either. Pity, would be a GREAT app!

Thanks for sharing . .

Strange, doesn't work on my JasJar WM 5 either. Pity, would be a GREAT app!

I do not know what you did wrong but i have a jasjar with rom verson 1.96 and i have a i-mate KJAR-which both are running windows mobile 5.Rule of thumb.If you have tried to install to an external SD it wont let you do it.Install to your main memory.If you are low on memory on your JASJAR.Get the unlocking ROM tool and delete the crap that is in there and then save it to your main memory,thus giving you more room on your mobile.Regards

hmm...i tried installing it to main memory...even took out the minisd card in my 6700 and tried installing it memroy....still no luck

I've tried it. It's almost good, but the caller who call to my phone still hear a short suond, then hang up when I blacklist him. It's truely bore. Anyone have idea to solve that bug???

thanks !!! i'll try it in my HTC TYTN (WM5) and i will send back my comments :)

working for me! wm2003 xda2i

I do not know what you did wrong but i have a jasjar with rom verson 1.96 and i have a i-mate KJAR-which both are running windows mobile 5.Rule of thumb.If you have tried to install to an external SD it wont let you do it.Install to your main memory.If you are low on memory on your JASJAR.Get the unlocking ROM tool and delete the crap that is in there and then save it to your main memory,thus giving you more room on your mobile.Regards

THanks for the info, but here comes the stupid question .... what is an unlocking ROM tool? Would love to get rid of some of the junk in there if possible!

Tried to install to main memory but still didn't work! Strange hey?

Thanks anyway!

I've tried it. It's almost good, but the caller who call to my phone still hear a short suond, then hang up when I blacklist him. It's truely bore. Anyone have idea to solve that bug???

I think this has been explained a few times before and was also explained in Call SMS Blocker thread. The reason why there is still one tone and then hang up is that the system requires the first tone to indentify the caller for caller id to be displayed.

As such, one would say that it is not a bug. Not sure if anything can be done at all...

same here the cab file refused to be installed im my hp WM5.... installation unsuccessful....need advice....

i don't know how it started working again, but after hard-resetting my wm5 device it worked

I installed it..replaced the crack but afterwards it said that crac needed to be wm5 signed...after signing all OK EXCEPT ....the app doesn't really hang-up but just say so...and the caller hears every ring..
What's wrong??
P.S. I'm using eten x500

thank for good application

can't install on WM5.0

I installed at wm2003 on hp ipaq 63 series, but when i want to try to open this magicall but software still trial version?

on Eten glofiish x500 it's installing fine but not working properlly ...it only says the call has been hanged-up but the caller still hears all the rings..
What a pitty!

[Only registered and activated users can see links]

MagiCall is a tool for bidirectional calls filtering and SMS filtering. With it, you can block unwanted callers, auto hang up on someone bothering you, and more

Requirements:
WM2003 PPC Phone, WM5.0 PPC Phone, 250KB

Last updated: 11-Nov 2006

MagiCall is a smart tool for bidirectional calls filtering and SMS filtering. With MagiCall, you have the ability to block unwanted callers, automatically hang up on someone bothering you, and more! Stop anyone you just don't feel like speaking to at the moment from disturbing you.

Automatically add prefix number in front of the original outgoing call number based on your rule. Hang up predefined outgoing numbers such as international calls. In addition, you can also take control of your incoming SMS Messages. Reply back or send an SMS to someone or launch an application when a rule is being triggered. And it can log detail information about all triggered events to the log file.

Features:

Bidirectional calls filtering
SMS messages filtering
Filters by numbers
Filters by contact/non-contact
Filters by SMS contents
Auto hangs up unwanted calls
Auto delete spam SMS messages
Sends or forwards SMS to one or more numbers
Launches applications
Support landscape and square screen
More...


Thanks to hdf for the released!

:D Enjoy!

[Only registered and activated users can see links]

reps to ya kipe another great app. works great with my dopod 700..the difference between the callfilter of magicall and smartfilter is that with if i block someone woth magiccall, if the person tries to call me he will still be hearing my phone ringing but in reality the line was already hung up unlike smarfilter where he'll just hear 1 ring then thats it. i dont know if its a good thing...but at least 1 app to block calls and sms. many thanks

on Eten glofiish x500 it's installing fine but not working properlly ...it only says the call has been hanged-up but the caller still hears all the rings..
What a pitty!

same here but the bright side i guess is that your phone will not ring ..still meets the goal of not answering "unwanted callers".

@bkb NO....the thing is that the call it is not actually hanged-up..and that's why the caller hears the rings..and what is the point of this software,then? I want the caller to think I'm not available ..

Not that I don't want to answer his call..

thanx for the post kipe

is it full version?

@bkb NO....the thing is that the call it is not actually hanged-up..and that's why the caller hears the rings..and what is the point of this software,then? I want the caller to think I'm not available ..

hmmm...when i call my phone using the no ive blocked i hear ringing but the unit that has magicall doesnt ring so for me it works coz if dont want certain nos to call me , they just hear ringing but my unit doesnt so i dont get bothered. I see your point you just want to let others think your unavailable...for me its about not getting a call from a certain person so i guess its ok for me.,

perfect!!!
thanks for the upload
regards

MagiCall is no doubt a good Software, But once i looked at a Cheap Viva Cell Phone, there was a feature of Call Operator in that you was able to block the Calls,, When the Calls comes from that blocked Number, Phone behaves like it is switched off,, Not Reject the Call like MagiCall do

hey man,thanx 4 the effort,will try on my Jam.more power man!!!

try installing the latest version its compactible with windows 5.0


[Only registered and activated users can see links]
but i dnt have the crack dudes .. please update this with crack