bluemimmos
9th January 2007, 09:10
i was listening to my pod and i paused a song and kept.
It got hang then so i tried to reset the pod nano by pressing action and menu key nothing happened.
I tried to go to ipod diagonostic menu but not working . its dead what should i do.
It's not detected in the computer too.
Pls help me out.
exiled1
23rd January 2007, 00:06
Is there a reset button on these?
Rodcher
23rd January 2007, 21:35
Pressing the Menu button and the Middle Button for 5 seconds, does a soft Reset. Which isn't very helpful when your Ipod doesn't boot up
How long do you have the nano?
exiled1
23rd January 2007, 22:24
1. Check that your hold switch is off by sliding the switch away from the headphone jack.
2. Press and hold the following combination of buttons buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
Shuffle: Turn it off, turn it on. Done.
If you have an iPod Mini or 4th gen iPod or higher, then you need to press the Menu and Select buttons, not the Menu and Play button, to restart. The Select button is the center button in the middle of the wheel. Upon reset, your will see the iPod name and the Apple logo. You may have to attach your power plug in your iPod to make this work. Your iPod should mount on your computer now. If not, keep reading.
3. The iPod name and the Apple logo will briefly appear upon a successful restart before advancing to the Main Menu.
baboy
28th January 2007, 11:24
try slapping @ the back of ur ipod, i have this problem w/ my ipod photo before it hangs & when i reset it, it shows the apple logo and the sad ipod icon. Im reading one of the forums in ilounge & people says to try using the slapping technique, i tried slapping the back of ny ipod and whala it works again perfectly.
bluemimmos
23rd February 2007, 11:04
no i opened it and re assembled no thing happened..
pls help me......
Macflame
1st April 2007, 23:45
no i opened it and re assembled no thing happened..
pls help me......
It could be a dead battery. Leave it on charge for a few hours. Then open your nano again and use a voltmeter to see if there is any life in your battery. If you do not have a meter try a low voltage torch bulb and a piece of wire. It worked for me! Good luck.
dubsta1
3rd June 2007, 18:02
took mine to apple store they said hard drive was dented. don't know how.
so now they say to repair it's $130