Finally a FullProof Crack To Permanently Activate Windows Vista-New!!!

http://img80.imageshack.us/img80/6879/activated5840ht4.png

http://img134.imageshack.us/img134/6012/vistarecyclebinrm2.jpg

It Works 100% on V!$t@ Ult!m@te, H0me B@sic,H0me Prem!um version and on V!$t@ RTM, V!$t@ Pre-RTM,RC1 and RC2 Version. ENJOY !!!!!!!

It Works 100%



Until now, M!cr0$0ft has an upper hand, with no permanent or foolproof ways to cr@ck or bypass Windows Vista activation request emerged. Instead, various workarounds and tricks to bypass, skip, delay, disable or spoof Vista activation has been suggestion, to various degree of success, such as extend evaluation period, rearm method, install V!st@ in future year, ‘frankenbuild’ Vista by replacing RTM build WPA files with RC build files, activate against spoofed KMS server, or run and activate Vista with own local KMS server and etc. Now, there is new crack method that able to permanently stop the countdown timer of time left to activate Windows Vista, effectively running Vista OS in full functionality evaluation mode forever.

Install Windows Vista Ultimate edition (or other edition) without product key.
Windows Vista needs to be applied with 2099-ReArm trick, so that the counter of minutes to no activation required period will not return to normal after reboot. Click on Start Orb button.
Select “All Programs”, then “Accessories”.
Right click on “Command Prompt, then select “Run as Administrator (A)”.
If User Account Control (UAC) prompt a warning message, click on “Continue”.
In the command prompt, type date and press Enter. You will see the following:

M!cr0$0ft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:Windowssystem32>date
Current date: 12/19/2006 Thursday
Enter new date:
Enter 12/31/2099 (December 31, 2099).
Next, type cscript slmgr.vbs -rearm. You will see something like the following:

C:Windowssystem32>cscript slmgr.vbs -rearm
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.

The command completed successfully.
To make the change effectively, please restart the system.
Then reset the date of the system to current date again by typing date again. You will see the following:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:Windowssystem32>date
Current date: 12/31/2099 Thursday
Enter new date:
Type in current date, i.e. 12/19/2006.
Exit from command prompt, but do not restart the computer.
Download StopTimer.zip, StopTimer.zip, StopTimer.zip or StopTimer.zip torrent.
Extract the downloaded archive file into a folder. It should contains “Vista test crack.exe” and “timerstop.sys”.
Execute or run the “Vista test crack.exe” by right click on “Vista test crack.exe”, and select “Run as Administrator (A)”.
Optional: Press in Test button, and it will pop up a message says 4 timers are stopped. At this time, the counter should be freezed, Check with slmgr.vbs -dlv command, with the minutes left should be the same after a few minutes interval. If it’s the case, continue with the following steps to run the crack every startup.
In the Vista test crack window, click on “Install” button. You will be prompted with “Service installed” message if everything is done properly and correctly. The crack will copy the patched stoptimer.sys to system folder and install a new service named “timerstop” to stop kernel-mode timers in spsys.sys system file.
Exit from the crack, and restart the computer.
The hacking is basically done. Next few steps to to verify that the activation grace period built-in countdown timer is actually stopped and disable the timers from working properly, and make sure that the crack is installed properly. After restart, log on to Windows Vista. Run for a few minutes.
Press on Windows + R keys.
Type slmgr.vbs -dlv to check the time left to activate Windows Vista. If the time left is 43200 minutes that’s mean the crack is successful.


With the crack, you will have the following in the registry:


Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMControlSet001ServicesTimer Stop]
“Type”=dword:00000001
“Start”=dword:00000002
“ErrorControl”=dword:00000000
“ImagePath”=hex(2):5c,00,3f,00,3f,00,5c,00,45, 00,3a,00,5c,00,57,00,69,00,6e,00,
64,00,6f,00,77,00,73,00,5c,00,73,00,79,00,73,00,74 ,00,65,00,6d,00,33,00,32,
00,5c,00,54,00,69,00,6d,00,65,00,72,00,53,00,74,00 ,6f,00,70,00,2e,00,73,00,
79,00,73,00,00,00
“DisplayName”=”TimerStop”


Further information:
The TimerStop vista test crack works on all 32-bit x86 Windows Vista edition such as Vista Ultimate and Vista Home Premium. Success rate in 64-bit (x64) environment is likely to be low.
The crack will make the time left to activate Vista to become always 43200 minutes (30 days), and will not countdown or reduce.
It’s possible to access Windows Update if you install Windows Vista with default product key (no product key entered when installation).
During the first 3 days of activation grace period after installing Windows Vista, M!cr0$0ft has designed it in such a way that Vista will allow greatest flexibility for users to install required drivers and application during this period, so Vista won’t prompt any reminder message for activation. After crack, Vista OS will always run with 30 days left for activation, thus there will not be any watermark or reminder to activate.
It’s possible to pass Windows Vista Genuine Advantage (WVGA) validation, so users able to download M!cr0$0ft value-added software for genuine customers.
As mentioned above, as Vista will also remain in first 3 days of activation grace period, in theory, Microsoft will not be able to differentiate who is the newly installed system, or who is the ‘patched’ system, unless of course, they check for the specific file or system (privacy anyone?).
Users can only view that there is 30 more days for system to be activated in the system properties, but it won’t affect system usage or installation method.

Detailed Info, Needed Files and Another way to activate Vista is in the RAR File.

http://rapidshare.com/files/9526647/VistaRTM-NewCrackMethod.rar.html

.sys file :???:

Just a heads up, this file executes in ring 0 and runs in the kernelspace, as such can do anything it wants to the kernel and not be detectable by any virus scanners.

Very very unwise putting any .sys file on your system.

Can you upload here PLS!

*NEW* V!st@ Cr@ck (T!me Stopper)!!!!

For people who wish to know, this crack stops the timer to leave your vista install at 30 days remaining forver, and works with w!nd0w$ update. You might wish to opt out of any val!dation updates though Wink

Apply one of the "2099 trick" (eg: set install date to: 2099 and set date back after install...)


1. Extract the .rar file.

2. Right click on vistacrack.exe and select properties.

3. Goto Compatibility tab and check "Run this program as an administrator"

4. Close properties tab and run the crack file, hit crack as shown.

5. Computer will start the crack, and reboot.

6. When vista loads, it will show a warning on the systray, right click on it, and allow

the program to be started, and then hit allow when the warning pops up again.

7. The crack will then open up and finish the process. Hit finish to close the program.

8. Crack is now complete!!


To double check to make sure it worked, reboot your computer and goto:

1. Start > Run > slmgr.vbs -dlv

2. Wait a sec for the box to pop up

3. Look at the bottom line, if it says the time remaining is 43200 your set!


File Size : 11.3MB

Download :

http://rapidshare.com/files/12008389/VAAIO_VTC.rar.html

Password :

www.softarchive.net

Didn't work for me :(.

After reboot that asked me to retype my license code. When I put the RC2 serial then that asks me to activate online or select other type of activation.

I have tried that crack after installing fresh vista .. it works now ... thanks :-)

Rep ++

*NEW* V!st@ Cr@ck (T!me Stopper)!!!!

For people who wish to know, this crack stops the timer to leave your vista install at 30 days remaining forver, and works with w!nd0w$ update. You might wish to opt out of any val!dation updates though Wink

Apply one of the "2099 trick" (eg: set install date to: 2099 and set date back after install...)


1. Extract the .rar file.

2. Right click on vistacrack.exe and select properties.

3. Goto Compatibility tab and check "Run this program as an administrator"

4. Close properties tab and run the crack file, hit crack as shown.

5. Computer will start the crack, and reboot.

6. When vista loads, it will show a warning on the systray, right click on it, and allow

the program to be started, and then hit allow when the warning pops up again.

7. The crack will then open up and finish the process. Hit finish to close the program.

8. Crack is now complete!!


To double check to make sure it worked, reboot your computer and goto:

1. Start > Run > slmgr.vbs -dlv

2. Wait a sec for the box to pop up

3. Look at the bottom line, if it says the time remaining is 43200 your set!


File Size : 11.3MB

Download :

http://rapidshare.com/files/12008389/VAAIO_VTC.rar.html

Password :

www.softarchive.net

Image contains links of another sitte . re-upload again without advertising

I cant download shit from rapis share please upload it here thank you!!

File not found.

I cannot get this to work,keeps telling me that it will not let me the date is not right and will not exept it .Any help would be great thanks

links not workin mate.......................arun_gupta
pls re-upload again......

sorry friend .mod plz topic trash !!!

TRY THIS VISTA ENTERPRISE AND BUSINESS KEY GENERATOR ZIP FILE OR TRY THIS LINK
h..p://rapidshare.com/files/17409103/ShareBay.OrG.rar
RAR PASS WORD -www.sharebay.org

--------------------------------------------------------------------------------

For people who wish to know, this CRACK stops the 30 day timer to leave your Vista active forever, and works with Windows updates. You might wish to opt out of any val!dation updates though Wink

Apply one of the "2099 trick" (eg: set install date to: 2099 and set date back after install...)

Follow this:

1. Extract the .rar file.

2. Right click on vistacrack.exe and select properties.

3. Goto Compatibility tab and check "Run this program as an administrator"

4. Close properties tab and run the crack file, hit crack as shown.

5. Computer will start the crack, and reboot.

6. When vista loads, it will show a warning on the systray, right click on it, and allow

the program to be started, and then hit allow when the warning pops up again.

7. The crack will then open up and finish the process. Hit finish to close the program.

8. Crack is now complete!!

To double check to make sure it worked, reboot your computer and goto:

1. Start > Run > slmgr.vbs -dlv

2. Wait a sec for the box to pop up

3. Look at the bottom line, if it says the time remaining is 43200 your set!


Download

Code:
http://rapidshare.com/files/13331805/Vtime_pass_2007.rar

already provided in "Windows Vista Collection........." thread...pls check

always search first and then post!!!!

I am here to present you a genuine copy of windows vista which I am currently using with this handy little crack.

CHECK OUT THE PICS:--

http://i6.photobucket.com/albums/y247/kylecah/Activated.jpg


Download the Crack from here, its in ISO format.


2: unpack the complete ISO to a folder, say C:\softmod (You can use winrar, isobuster, etc to unpack)

3: Disable your UAC (UAC= User account control, you can enable it as soon as all of these steps are complete!)

4: go to start > all programs > accessoires and rightclick "Command Prompt" > choose "run as administrator" type "C:\softmod\install.cmd". Without quotes ofcourse.

5:Now Reboot your computer back into the desktop.

6: go to start > all programs > accessoires and rightclick "Command Prompt" > choose "run as administrator" type: "C:\windows\system32\slmgr -ilc c:\softmod\oemcert.xrm-ms". Wait untill windows pops up with a confirmation-message. Be sure to use an UNMODIFIED version of slmgr, if you are using a modified version, DO NOT USE THIS CRACK, it will screw the shit outa you if you do.

7:now type "C:\windows\system32\slmgr -ipk <PRODUCTKEY>". Wait untill windows pops up with a confirmation-message. (Keys are listed below, this has been used multiple times on all of my PC's, it does not ~Censored~ around with M$'s registry server or whatever that thing is called =/.

8: now type "C:\windows\system32\slmgr -ato Wait untill windows pops up with a confirmation-message.

Complete, you should now have a genuine copy of Windows Vista.
NOTE: Step 7-8 took about 5mins to complete, so do not worry about that.
Code:
PRODUCT KEYS:
Windows Vista Ultimate:
Windows Vista Business:
Windows Vista HomePremium:
Windows Vista HomeBasic:

ALL THESE KEYS ARE IN ATTACHMENTS...


GRAB THIS...

you´re joking hu? do i have to connected to the internet or so?

imo there's a limit to how many pc's will load with these same keys-wga will check & only allow volume licensed keys crked using earlier msdn/technet downloads-plus ms will look here-http://www.mydigitallife.info/2007/02/18/improved-way-to-add-slic-slp-20-table-into-bios-acpi-to-activate-windows-vista-oem/
it doesn't seem long-term?

install with serial key or with out serial key ?

Yes the max limit a product key can be activated is 10 times and only on 3 different pc's. I don't think this will be a sure method :)

thanks!!!!! it worked for me like a charm.....even if i had the time crack installed......now i have genuine windows vista ultimate....you must use this guys......

it worked to my laptop too.....thanks again my dude....guys try this and you will be very happy.....i tried everything but this one works 100%...!!!!

i cannot activate product activation failed

''Download the crack from here, in ISO formate...''
there is no link there?
Did you mean the text you attached with key?

when i tried to install the crack i get an error message!
maybe someone can supply me a product key, so i can activate my vista via phone?!

PROOF:--
Vista activated,updates working,no problems,no BSOD no anything but fully working vista goddamn this is great setter_gr!!!!
SAY THANK YOU!!!
10000% WORKING DO REP ME UP...

http://i154.photobucket.com/albums/s256/loop4444/ScreenShot001.jpg

Microsoft Windows Vista Activator 2007

Release Date : 6 March, 2007

Description : Activate Windows Vista Completely

Windows Version to Activate

1. Microsoft Windows Vista Ultimate Edition
2. Microsoft Windows Vista Business Edition
3. Microsoft Windows Vista Starter Edition
4. Microsoft Windows Vista Enterprises Edition
5. Microsoft Windows Vista Home Basic Edition
6. Microsoft Windows Vista Home Premium Edition

How to Activate Windows Vista

1. Extract the archive
2. Run "windows vista 2007.exe"
3. Enter "User Account" Name and "Computer Name"
4. Enter the CD-KEY you used while installing your vista.
5. This will take a minute to activate windows vista.

NOTE : In instruction (4). Leave the box blank if you have installed vista without cd-key.


TAKE A LOOK :

STEP 1:

http://i18.tinypic.com/47ke6io.jpg

STEP 2:

http://i18.tinypic.com/33zbcr9.jpg

STEP 3:

ITS OPEN A WINDOW OF COMMAND PROMT - YOU MUST WAIT 1 MINUTE

STEP4 :

RESTART YOUR WINDOWS WHEN INSTALLATION ASKS YOU

YOUR VISTA HAS BEEN ACTIVATED

LOOK :

http://i19.tinypic.com/48foy93.jpg

http://i16.tinypic.com/401pocp.jpg

http://www.freejunction.info/forums/index.php?showtopic=224

PLEASE REGISTER AND IF YOU DOT WANT TO HERE GOES THE DIRECT LINKZ..
Code:
http://www.MegaShare.com/123988



password : setter_gr

OR
Code:
http://rapidshare.com/files/19760571/ACTIVATION_FOR_ALL_VISTA_2007.rar.html



NO PASSWORD NEEDED

DONT FORGET TO SAY THANKS!!!!!!!!!!!!!!!

In order to test this I've to register in another forum ... so, can't rep u. sorry.

Hey Dude..dont Wanna Register Just Take The Direct Added Links ..

nikh880 can you tell me please where to download vista ultimate in greek language?????...thanks

Where's the picture of Step 1,2,3,4 & Look anyway ???? Only see the screen telling that Vista is activated on top part of the post

No kidding is this really working,,??cant test it yet coz im downloading a vista home premium version ill test this after i finish it but may take some time if any1 tried this already please post a feedback so we all know if this is true or just another thingy...anywayz i hope this is true getting excited to get my hands on vista...damn!

hey dude,the first pic in the post is the is the geniune pic of my own friends system..this is 100000% geniune working and yes no doubts for installing that...and yes greek vista i will check and post...
all you guys can check more about vista in my here..

to download vista in greek language ,just visit

register and move to the PC REQUEST sections and there is a torrent file of 3gb..
windows vista greek full full full...

and you can download that...do rep me up ,if you find that useful...

Dude I got a problem when I install this crack, when I 'm finish instaling this crack I got some problem instaling the driver of my moboard (vista driver) when I reboot my computer the vista won't boot , it boot's to a blue screen

well dude i did the same as you did ,and the result was the first pic shown ...try again..may be something went wrong.,,,

http://i85.photobucket.com/albums/k74/rabidwhodey/viscrk0307ab2.jpg

This is the newest Activation+WGA crack, you can download all updates for now from Windows Update

This is better than Timestop because you can download the updates which are only available for activated windows Vista Installations, and if you have Timestop, you don't have an Activated Vista.

It only works for the 32-bit Versions of Windows Vista.

************************************************** ***********
*** OEM BIOS Emulation Toolkit For Windows Vista x86 v1.0 ***
************************************************** ***********


What's the purpose of this release?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Bypassing the product activation requirement of Microsoft Windows Vista x86.


How does it work?
~~~~~~~~~~~~~~~~~

Microsoft allows large hardware manufacturers (e.g. ASUS, HP, Dell) to ship their products
containing a Windows Vista installation that does NOT require any kind of product activation as
this might be considered an unnecessary inconvenience for the end-user.
Instead these so-called 'Royalty OEMs' are granted the right to embed certain license information
into their hardware products, which can be validated by Windows Vista to make obtaining further
activation information (online or by phone) obsolete.
This mechanism is commonly referred to as 'SLP 2.0' ('system-locked pre-installation 2.0') and
consists of the following three key elements:

1. The OEM's hardware-embedded BIOS ACPI_SLIC information signed by Microsoft.

2. A certificate issued by Microsoft that corresponds to the specific ACPI_SLIC information.

The certificate is an XML file found on the OEM's installation/recovery media,
ususally called something like 'oemname.xrm-ms'.

3. A special type of product key that corresponds to the installed edition of Windows Vista.

This key can usually be obtained from some installation script found on the OEM's
installation/recovery media or directly from a pre-installed OEM system.

If all three elements match Windows Vista's licensing mechansim considers the given
installation a valid system-locked pre-activated copy (that does not require any
additional product activation procedures).

So the basic concept of the tool at hand is to present any given BIOS ACPI_SLIC information to Windows
Vista's licensing mechanism by means of a device driver.
In combination with a matching product key and OEM certificate this allows for rendering any system
practically indistinguishable from a legit pre-activated system shipped by the respective OEM.


How do I use it?
~~~~~~~~~~~~~~~~

Preliminary hint:
Most operations described below require elevated privileges, so disabling UAC (Run->MSCONFIG.EXE->
Tools->Disable UAC) for the time being is recommended, Of course, it can be safely re-enabled after
all steps have been performed. Otherwise OEMTOOL.EXE and some SLMGR.VBS operations must be explicitly
run with adminstrative privileges.

1. Install the Windows Vista x86 edition of your choice without entering any product key during setup.
Basically any Windows Vista x86 installation media will do, regardless if it's MSDN/Retail/OEM/...,
MSDN/Retail are recommended though.

2. Install the emulation driver.

Run OEMTOOL.EXE, select the OEM BIOS information to emulate (ASUS might be a good choice given the
fact that it's the only OEM for which a complete set of product keys is provided http://www.warezforum.info/forum/images/smilies/21.gif) and hit the
'<Install Emulation Driver>' button.

Alternatively you can just right-click the ROYAL.INF file and chose 'Install' from the appearing
menu. This only allows for installing the default OEM BIOS information (ASUS) though and is strongly
discouraged unless OEMTOOL.EXE fails for some unknown reason.

When prompted about whether to install an unsigned driver, allow it.
(For some odd reason Microsoft didn't wanna sign this one...http://www.warezforum.info/forum/images/smilies/21.gif)

3. Reboot your machine.

4. Install the OEM certificate matching your OEM selection during driver installation by running

SLMGR.VBS -ilc <OEMNAME>.XRM-MS

(e.g. "SLMGR.VBS -ilc C:\ASUS.XRM-MS" if you chose to install the default driver and extracted
the certificate file to C:\)

Note that this operation might take quite a while depending on your system, so be patient.

5. Install an OEM product key matching the installed edition of Windows Vista x86 by running

SLMGR.VBS -ipk <OEM_PRODUCT_KEY>

(e.g. "SLMGR.VBS -ipk 6F2D7-2PCG6-YQQTB-FWK9V-932CC" if you're running Windows Vista Ultimate using
the default emulation driver)

Note that this operation might take quite a while depending on your system, so be patient.

See PKEYS.TXT for a list of OEM product keys published by different OEMs.

6. Run 'SLMGR.VBS -dlv' or right-click 'Computer' and chose 'Properties' to verify your licensing status.

Due to the variety of possible combinations of different earlier Vista activation hacks we're not gonna
provide details on 'persuading' existing installations to accept this method.
During our test the general procedure depicted above worked out fine though, i.e. installing the emulation
driver, rebooting the machine and then using the officially documented ways of installing a matching OEM
certificate and product key should do the trick in all but the most messed up cases.


What's that '<Dump OEM BIOS Information>' button in OEMTOOL.EXE for?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~

It dumps the BIOS ACPI_SLIC information of any SLP 2.0-enabled OEM system.
The dump can consecutively be used to emulate ('clone') that information on any other system by specifying
the 'Custom' option.
Using this function on a system booted using the emulation driver will give a dump identical to the currently
emulated OEM BIOS information, so be sure to uninstall the driver and reboot the source machine first if you
intend to dump the actual hardware-embedded OEM BIOS data.

Enjoy,

If u like this post then Press the thanks button

here is 2 windows vista cracks

http://rapidshare.com/files/22389692/vista_final_activation_cracks.rar

Vista crack posted every where. to make this forum clean, so i merged into one post.

I am here to present you a genuine copy of windows vista which I am currently using with this handy little crack.

CHECK OUT THE PICS:--

http://i6.photobucket.com/albums/y247/kylecah/Activated.jpg


Download the Crack from here, its in ISO format.


2: unpack the complete ISO to a folder, say C:\softmod (You can use winrar, isobuster, etc to unpack)

3: Disable your UAC (UAC= User account control, you can enable it as soon as all of these steps are complete!)

4: go to start > all programs > accessoires and rightclick "Command Prompt" > choose "run as administrator" type "C:\softmod\install.cmd". Without quotes ofcourse.

5:Now Reboot your computer back into the desktop.

6: go to start > all programs > accessoires and rightclick "Command Prompt" > choose "run as administrator" type: "C:\windows\system32\slmgr -ilc c:\softmod\oemcert.xrm-ms". Wait untill windows pops up with a confirmation-message. Be sure to use an UNMODIFIED version of slmgr, if you are using a modified version, DO NOT USE THIS CRACK, it will screw the shit outa you if you do.

7:now type "C:\windows\system32\slmgr -ipk <PRODUCTKEY>". Wait untill windows pops up with a confirmation-message. (Keys are listed below, this has been used multiple times on all of my PC's, it does not ~Censored~ around with M$'s registry server or whatever that thing is called =/.

8: now type "C:\windows\system32\slmgr -ato Wait untill windows pops up with a confirmation-message.

Complete, you should now have a genuine copy of Windows Vista.
NOTE: Step 7-8 took about 5mins to complete, so do not worry about that.
Code:
PRODUCT KEYS:
Windows Vista Ultimate:
Windows Vista Business:
Windows Vista HomePremium:
Windows Vista HomeBasic:

ALL THESE KEYS ARE IN ATTACHMENTS...


GRAB THIS...

helo can u pls tell wts d site to download the crack u juz added the pics u add the site also