TOMTOM NAVIGATOR 7 ON A Pocket PC ? [Archive] - Page 2

rusigor

5th July 2008, 21:28

this is what i get see the link below

http://img2.freeimagehosting.net/image.php?af624ec0cb.jpg.

can you explain it to me step by step by step please
gilinderi
Just nothing to explain! It means - you didn't download any update for any map. For example, if you install this map http://rapidshare.com/files/127371375/WE_720.1803.JPG on your fake (or real) device, then TTHome will see it, and show it's details - http://rapidshare.com/files/127371471/WE_720.1803-details.JPG
And you will be able to download update for it. And then you'll see a different picture - http://rapidshare.com/files/127370208/Map_Share_Prefs.JPG

rusigor

5th July 2008, 21:46

navigator 7 on HTC Cruise
When i install the TT7 Cab it says ;Unable to start not enough memory is available
I mean do i have to patch my tomtom.exe or what?
tomtom.exe is almost patched - you don't need to do anything to it. Are you sure you install the right version (for QVGA)?
And my advice - install it to SD card, no to main memory. I use TT_Nav_7.450.9028_repack3-qvga-blue.cab from http://rapidshare.com/files/124506860/tomtom_7.450.9028_repack3.rar - and it works fine:egdance:

gilinderi

5th July 2008, 22:24

rusigor it does no see any of my maps. what can i do?

rusigor

5th July 2008, 22:58

gilinderi
If your fake emulator doesn't see maps - you must patch your TomTomHome - after it downloads software for emulator - patch it with this - http://rapidshare.com/files/125473518/Easyusetools_for_Keygen_Mapcheck_Metacheck_ttsyste mpatcher.rar - unrar it to your system disk (perhaps it C:\) of your desktop. Then run "C:\Easyusetools_for Keygen_Mapcheck_Metacheck\RunMeforAllAutomatic.cmd"
In the screen

Enter 1 or 2 for your Choice, Standard is 1

1. Run it for Navcore 8.010 and higher
2. Run it for Navcore 7 up to 8.002

1-2 :
choose 2
In next screen
Enter 1,2,3 for your Choice, Standard is 1

1. Run Keygen for all Maps at your TTDevice
2. Run ttsystem Patcher
3. Search Home dlls and patch each dll

1-3 : choose 3

Then wait - it will scan all folders on your system disk and patch TTHoum dlls.

After work is finished - your TTHome will see maps on your fake-flash card. But! first you must activate maps on your fake device and run it from TTHome - only after fake device starts, and map is loaded (check version from TT-7 menu), you can quit "Manage My TT device" and try to other options - check fake-device components. It must show your map(s) - they must be placed into root of the flash-card. And only activated (and loaded at least one time from emulator) TTHome will show. After that you can apdate them - from TTHome (click on "Update My TT ONE") - and only active map on emulator will be updated. To update second map - you must launch emulator, change map, quit it, and try to update once more time - another map will be updated.

Try!

matik80

6th July 2008, 02:32

Sorry my stupidy, but what are "fake emulator"?

btw. repack3 works nicely on MS wm6 emulator too.

marez2

6th July 2008, 04:38

Sorry my stupidy, but what are "fake emulator"?Emulator is part of TomTom Home. It's sth like "You device". Faking means making emulator think that real device is located on memory card.

danovic212

6th July 2008, 12:04

My TomTom Home (2.3 for PNA) doesn't download any emulator, instead it waits for the TomTom device to connect to the PC while it is already connected.
My Mio A701 has no driveletter when connected to PC (WinXP). So haven't run ttsystempatcher, but instead just installed repack3. Tomtom itself works ok, just can't get mapshare to work.
Any suggestions?

Mio A701

Kajoe

6th July 2008, 13:40

hallo guys

could someone please help me with navigator 7 on my HTC Cruise
When i install the TT7 Cab it says ;Unable to start not enough memory is available

I mean do i have to patch my tomtom.exe or what?
please someone explaine me step to step
i will be very thankfull
sorry for my bad english

Thank you all
Regards

Okay here you go. I have another version than the repack 3. I have"TomTom7_Diamond.cab". Here is my tutorial:

Extract all files to C:\Install

1) Install "TomTom7_Diamond.cab" to the root of your PDA SD Card.
2) Startup Tomtom. TomTom wil not find any maps but gives you the opportunity to download
a testmap.
3) Follow the steps and download the smallest map you see.
4) In your navigation screen you see on the righthand site below signalstrengt
(from satelites)
5) Push on that and than you can see the button "version". There you can find your
Device ID.
If you cannot download a trial version, you can do the following:
Go to your Device\ SD Card or to "Navigator" map.
There you find "ttnavigator.bif".Copy this file to your PC Desktop.
Open it with Notepad.
Behind "DeviceUniqueID" you see your 10 letter "Device Code".

6) After this, copy "TomTom Navigator.exe" from your Device to "C:\Install\tt7-stuff"
you can find that in the map "Navigator".
7) Go on your computer to Start/ Run.
Type in Command "CMD" and an Command Prompt screen wil open.
8) Fill in the following command in there: CD C:\ and Enter.
9) Than: CD Install and Enter.
10) Than: CD tt7-stuff and Enter.
11) Type than the following command: patcher.exe "TomTom Navigator.exe" and Enter.
It will end with saying "OK"
12) Than: unsigner.exe "TomTom Navigator.exe" and Enter.
It will say that the certificate is removed.
13) Now copy "TomTom Navigator.exe" from "C:\install\tt7-stuff" back to your Device in
map "Navigator".
14) Install map "Benelux" or "Europa" or what you want to the root of your SD Card.
14) Unpack the "Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher27-6.rar" from
TTuser for patching any map you installed on your SD Card. All credits go to TTuser.
15) You need the "Device ID" for that. So did you write up your 10 lettercode from step 5?
16) I made a tutorial to make mapshare work. See "TTMapshare Dutch.rar" or
"TTMapshare English.rar" for that.

Have fun with this version. Kajoe

And here I have uploaded the complete package, with exception of Maps. Maps are uploaded enough.

http://rapidshare.com/files/127544983/TomTom7-Diamond_Kajoe.rar
Have fun

Kajoe

6th July 2008, 14:39

Which version do you use? I have repack3 and TT can't see any of 6 & 7 maps. My app is installed on \StorageCard\Navigator folder and maps on \StorageCard\*MapFolderName

Your app must be installed on your Device and not on the SD card. The Maps must be on the SD card or with a Diamond on Internal Memory.

Kajoe

6th July 2008, 14:43

why use you not the "easyusetool":confused: it can do exactly the same(activate map, patch homedll) and it works better.

I agree with TTuser. He made the best tools ever and it works allways. He made it working with all versions and very easy.

rusigor

6th July 2008, 15:40

Okay here you go. I have another version than the repack 3. I have"TomTom7_Diamond.cab". Here is my tutorial:

1) Install "TomTom7_Diamond.cab" to the root of your PDA SD Card.
Thanks. But... It's pity not working on older devices - just don't install - http://rapidshare.com/files/127573280/Not_compatible.jpg - writes not compatible:oops2:
16) I made a tutorial to make mapshare work. See "TTMapshare Dutch.rar" or "TTMapshare English.rar" for that.
The same thing (with repack 3) - TTHome just don't see neither PDA nor SD-card in it.:oops2:

Back to my fake emulator:sorry:

rusigor

6th July 2008, 15:44

Okay here you go. I have another version than the repack 3. I have"TomTom7_Diamond.cab". Here is my tutorial:

1) Install "TomTom7_Diamond.cab" to the root of your PDA SD Card.
Thanks. But... It's pity not working on older devices - just don't install - writes not compatible:oops2:
16) I made a tutorial to make mapshare work. See "TTMapshare Dutch.rar" or "TTMapshare English.rar" for that.
The same thing (with repack 3) - TTHome just don't see neither PDA nor SD-card in it.:oops2:

Back to my fake emulator:sorry:

koukou

9th July 2008, 17:13

Hi all,

Anyone can advise what best to buy "HTC Touch Cruise" or "HTC Touch Diamond"?
In fact, TomTom has NO map for some country and iGO8 (http://www.navngo.com/pages/global/eng/igo_8_description)yes. Then I would like to run both TomTom Navogator and iGO8.

Now, Diamond have 4 GB internal storage but NO slot for expandable storage. Cruise have 128 MB Ram + a"slot for expandable storage".
Then the question is: It possible to live together TomTom Navigator and iGO8?

Regards
koukou

superduper

9th July 2008, 18:07

@koukou

yes, you can have both IGO8 and TT7 on Diamond. there is very simple configuration trick for IGO8 for it to work on internal memory of Diamond.

BTW, if you in need of memory slot, then wait for HTC Touch Pho ( August 2008). It comes with SD slot, qwerty keyboard + VGA out. very nice handsets.

I will be switching to HTC Touch Pro from HTC Diamond the moment Touch Pro is released.

koukou

9th July 2008, 18:42

@koukou

yes, you can have both IGO8 and TT7 on Diamond. there is very simple configuration trick for IGO8 for it to work on internal memory of Diamond..
TNX for the info.
Mat you reveal the trick?
Regards
koukou

falcon1326

9th July 2008, 20:40

Where can I find TT7 for UIQ device. I have a p990i. Would this work on that?

Thanks in advance:thanks:

superduper

9th July 2008, 20:56

IGO config file for HTC Diamond (internal storage) and also VGA mode enabled.

NOTE: you neeed IGO 8 version on at least: Igo 8 v8.0.0.41506

older builds will NOT work on Diamond.

sys.txt file:

----- 8< ------

[folders]
app="Internal Storage\igo8"
sdcardapp="Internal Storage\igo8"
sdcardpath="\Interal Storage"
data="\Internal Storage\igo8"
content="\Internal Storage\igo8\content"
texture="\Internal Storage\igo8\content"
save="\Internal Storage\igo8\save"
data="\Internal Storage\igo8"
content="\Internal Storage\igo8\content"
texture="\Internal Storage\igo8\content"
save="\Internal Storage\igo8\save"
custom="\Internal Storage\igo8\custom"

[interface]
skin="ui_igo8"
resolution_dir="320_240"
vga=1

[rawdisplay]
class="landscape"

[debug]
skip_eula=1
enable_roadshadow=1

[map]
auto_nightmode=0

[msnd]
msnd.start=0

----- 8< ------

koukou

10th July 2008, 14:35

SonicSpeed

11th July 2008, 23:36

it works :confused: i remove files because i think it works not :pmpl:

possible can you also try this

http://rapidshare.com/files/123874130/TomTom_Navigator.rar

This file is suspected to contain illegal content and has been blocked. :angry:.

MIRRORS PLEASE

cifello

12th July 2008, 17:41

About Mapshare and the PDA, I'm using a ASUS. Anybody has some trick to make it working.
I've downloaded the TTHome 2.3 and installed in the PC. After installation in

x:\Program Files\TomTom HOME 2\xul\plugins\emulator

DO NOT Exist the 'navcore' subdir and obviously the fake emulator dll.

Due to this situation I can't patch the DLL and make the system working.
TTHome wait for a PNA/PDA connected but it doesn't find my PDA connected via ActiveSync

Does someone have some suggestions to make the system working?

Thanks in advance

:confused: :ash:

stezo2k

12th July 2008, 23:04

i'm trying to use patcher.exe to get my map recodnised but no luck :(

C:\tt7stuff>patcher.exe TomTom Navigator.exe
Can't open tomtom for reading

or alternatively can somebody send me a prepatched VGA version of the exe? thanks muchly

stezo2k

13th July 2008, 16:04

The only version of TTN7 i can get working on my PPC is "TT_Nav_7.450.9028_repack3-vga-black.cab" is there any patch for this version to get the maps recodnised? sorry for the double post

xdoctor

13th July 2008, 17:55

:sorry: for some faults...

xdoctor

13th July 2008, 17:56

Who can help please?

A fried asked me to upgrade his HP iPaq rx1950 (wm5, original TomTom 5) to TomTom7.

(1) What files do I need & where to find?
(2) What must I do?

Who can help please?

Thanks in advance!
:urtheman:

seltsimees

14th July 2008, 01:58

stezo2k

14th July 2008, 03:50

sounds like youre having the same problem as me, i'm running wince 4.2 using the VGA TT7. hopefully theres a solution :)

gert5539

14th July 2008, 23:53

has anybody installed maps for southern africa on tomtom7

brooklyn

15th July 2008, 00:48

has anybody installed maps for southern africa on tomtom7 What:wave: this map.:exactly:

ID=Southern_Africa.pna
105676568
705
build=1513
id=97337

vvgrp

15th July 2008, 01:26

tomtom.exe is almost patched - you don't need to do anything to it. Are you sure you install the right version (for QVGA)?
And my advice - install it to SD card, no to main memory. I use TT_Nav_7.450.9028_repack3-qvga-blue.cab from http://rapidshare.com/files/124506860/tomtom_7.450.9028_repack3.rar - and it works fine:egdance:

I downloaded this file but asking for a password. Can someone give me password? Thanks.

Pipo_de_Clow

15th July 2008, 10:19

The only version of TTN7 i can get working on my PPC is "TT_Nav_7.450.9028_repack3-vga-black.cab" is there any patch for this version to get the maps recodnised? sorry for the double post

Use version 7 maps with meta data file, your device_ID and tt7_keygen and it should work!

Pipo_de_Clow

15th July 2008, 10:24

hi to all
i tried to install tt7 on win CE 4.2 and this is not problem. tomtom starts and it seems that all is ok. but in this device is Storage Card called SDMMC. And tomtom will not see any map. The activation is ok and there can`t be problem. I think the problem is in name SDMMC, because in all other devices its called Storage Card.
Who has same question and is there solution for this ?

Unlike TT6, TT7 will not see version 6 maps automaticly is my experience.
With TT7 use version 7 maps with meta data file, your device_ID and tt7_keygen and it should work!

gert5539

15th July 2008, 11:18

What:wave: this map.:exactly:

ID=Southern_Africa.pna
105676568
705
build=1513
id=97337

only map i could find is the southern africa v710 and this does not work as it keep on telling me that the meta is not supported on the keygen. i am looking for maps that will work on htc p3300(artimes)

koukou

15th July 2008, 20:49

Hi all,

I found TomTom Navigator v8.00.9117 Multilanguage (http://www.toxiconline.com/index.php?option=com_remository&Itemid=57&func=fileinfo&id=15)
As i'm not experienced with TomTom Navigator,
any one know this version? if so, any one tested it?
do the Easyusetools_for Keygen can patch it? or it's already patched?

TNX for feedback
koukou

basflt

15th July 2008, 21:30

thanks for the link koukou

im not experienced either
all i can say that from all versions i got only v5 working
v8 would be great

basflt

15th July 2008, 21:53

so now i've downloaded
again i'm no expert but thit does not look like navigator to me
it more looks like a fake ttuser tomtom version to me

rusigor

16th July 2008, 00:17

I downloaded this file but asking for a password. Can someone give me password? Thanks.
Try this password:
4pda

stezo2k

16th July 2008, 01:37

Use version 7 maps with meta data file, your device_ID and tt7_keygen and it should work!

nah already done it mate, i'm gunna try a few maps, hopefully i can get it working

brassmann

18th July 2008, 00:21

Hi!

Does anyone know if TT7 works with HTC Touch (Modell-Nr: ELF0200 / WM 6)? I read almost every post of this thread but only newer devices are mentioned. I have TT6 installed at the moment.

Thanks in advance,
Brassmann

rusigor

18th July 2008, 02:36

brassmann,
It works with my Wizard. Why it won't work with your ELF?

ishuwereme

18th July 2008, 08:12

will this work with the new apple iphone 3g?

seltsimees

18th July 2008, 09:51

Unlike TT6, TT7 will not see version 6 maps automaticly is my experience.
With TT7 use version 7 maps with meta data file, your device_ID and tt7_keygen and it should work!

yes i have tried all kind of maps and there are no chanche yet to get it working. I think there are something limited in exe file or in dll -s. I have tried tt7 also in win CE 5 device and also no luck. This TTN7 works great in windows mobile software but not in win CE operating system.
correct me if i am wrong and you know the trick how to get it working in win ce system based devices.

rusigor

19th July 2008, 00:47

seltsimees
At this point there is no chance to get it working on win CE devices - no version build yet

basflt

19th July 2008, 07:48

seltsimees
At this point there is no chance to get it working on win CE devices - no version build yet

thought i was the only one
my device has win ce4.2
and both v6 and v7 refuse to work only v5

plaktoets

19th July 2008, 12:44

I managed to het mapshare "working" on my HTC TytnII with western_central europe v7 1803.
Working means updates are active, but all im getting is very small mapshare corrrections file (< 1mb), with no details about what kind of corrections they are.

After its installed, TT home shows in the topcorner that my map is uptodate 97840 corrections - edit: number increases after each "update"

However I seriously doubt that my map gets actually updated. I believe it should say how many corrections are ready to install, but i dont see any. Some people mentioned 2.000 - 8.000 updates for install.

TThome _does_ recognize my europe card because it offers POIs for download for all countries in the map.

So does anyone else see actual details of the corrections, and is there anyway to check if my map is actually updated, or not?

See the attached screenshot from Kajoe's manual to see the update im talking about - of which im not sure they are mapshare corrections

http://www.ortour.com/err/clip_image002.jpg

plaktoets

19th July 2008, 14:47

nevermind ^^. In Mapshare preferences i can see all the updates per country. I have 9.9 mb corrections installed.

rusigor

19th July 2008, 15:28

thought i was the only one
my device has win ce4.2
and both v6 and v7 refuse to work only v5

Till now nobody could start TT7 to work with WinCE4.2
BTW what PNA device you're using?

basflt

19th July 2008, 15:51

Happy man! It's the first post indicating TT7 can sometimes work with WinCE4.2
BTW what PNA device you're using?

i think you misunder stood me
[my english aint mutch]

i 've only got v5 working
v7 did install but it cannot find any map
it only wants to connect to internet

well the damn thing [ mio digiwalker 269+ ] cannot even connect to pc

so for now i'm stuck w v5

rusigor

19th July 2008, 20:21

i think you misunder stood me

i 've only got v5 working
v7 did install but it cannot find any map
it only wants to connect to internet

well the damn thing [ mio digiwalker 269+ ] cannot even connect to pc

so for now i'm stuck w v5
It's pity. Corrected my post above. BTW TT7 starts on your device! And else people reports it's go down with message "out of memory"!

BTW why TT6 doesn't work on your device? Rather strange!

Men from our forum solved this problem 2007.04.12! - http://4pda.ru/forum/index.php?showtopic=26442&view=findpost&p=691627

basflt

20th July 2008, 15:09

It's pity. Corrected my post above. BTW TT7 starts on your device! And else people reports it's go down with message "out of memory"!

BTW why TT6 doesn't work on your device? Rather strange!

Men from our forum solved this problem 2007.04.12! - http://4pda.ru/forum/index.php?showtopic=26442&view=findpost&p=691627

very nice link
but i dont understand russian

oakleyscar

21st July 2008, 07:42

Hi all,

I've got a dopod 838 pro running WM 6.0.
I had TTN6 installed and working and thought I'd try TTN7...
I've installed 2 different versions of TTN7 (TTN7.cab and TT_Nav_7.450.9028_repack3-qvga-black.cab) now but get stuck at the same problem.

TTN7 installed ok both times. However,

When I launch the app, I choose:
- my language English US - ok
- left-handed operation - ok,
- 24 hour time format - ok.
- TTN7 then tells me that there are no voices available (install from CD or download from tomtom.com)
- I select one anyway and get the warning message the voice you have selected is not available (continue)
- Then I get 'Activation failed' Sorry, this is not the correct activation code for the product ' Australia'. (continue)

I then get taken to a screen labelled: Select a map:
The only option I have is Australia and a button at the bottom labelled 'Voucher'

If I click on Australia, it takes me back to the previous error screen about the activation code.

If I click on Voucher, TTN tries to access the tomtom.com website and I get another error screen:
Error
This device cannot download a free map.
Download failed. Contact www.tomtom.com for further information.

Can anyone help me get past these problems?

Thanks.

Allan

GadgetChick

21st July 2008, 09:43

Tex88

21st July 2008, 10:42

I just managed to install TT_Nav_7.450.9028_repack3-qvga-blue.cab on both a T-Mobile Wing (latest stock ROM from T-Mobile US =WM6), and a Dell Axim x30 (obviously the wireless version) with the latest stock ROM from Dell = WM2003SE).

Both differ slightly in their feature set within TomTom7, both work much better with the program installed on the memory card, but both WORK! Yay. Currently with a legal version of US/Canada 710 I happened to have laying around, gonna try 720 here in a moment. Still had to generate a .dct for each with the easy tool set.

Anyway, any questions? That aren't mapshare related? 'Cause I didn't get that part to work yet.

basflt

21st July 2008, 18:53

i've read other forums about my device and they all say the same

not enaugh memory for v7

[ mio 269+ ]

besides the mio has no internet
it cant even connect to pc
so i cannot download the free map

rusigor

22nd July 2008, 00:39

besides the mio has no internet
it cant even connect to pc
so i cannot download the free map
It's not the problem - many of us (most) have no opportunity to download the map - just receiving "the map can not be downloaded for thi device" - so never mind about this!

oakleyscar

22nd July 2008, 05:39

I have this running fine on my DOPOD 838 pro WM6 from TT_Nav_7.450.9028_repack3-qvga-black.cab
but I downloaded my map separately.

what version of the map are you using?
Where is it installed on your DOPOD?

Which language did you select? English UK or English US?

try downloading some free voices from
http://www.ozpoi.com/

Install voices using tomtomhome.

Thanks GadgetChick,

Here's more info...
the maps are version 7.20
I tried both US & UK English, didn't seem to make any difference.

I have installed TTN7 onto my storage card.
Path: Device\storage card\Program Files\Navigator\*
The map folder is in the root of the storage card.
I also have a voices folder in the root of the storage card, with TTN6, I think I needed to copy them to a different folder to get them to work...

What comes next?

basflt

22nd July 2008, 08:29

It's not the problem - many of us (most) have no opportunity to download the map - just receiving "the map can not be downloaded for thi device" - so never mind about this!

thanks for replay [ and offer ]

have a day off so gonne try once again

Tex88

22nd July 2008, 16:00

i've read other forums about my device and they all say the same

not enaugh memory for v7

[ mio 269+ ]

besides the mio has no internet
it cant even connect to pc
so i cannot download the free map

Should be plenty of device to run TT7. I've just installed it on a couple of Dell Axim x30 and it works great!

You don't download the free map from TomTom, you get whatever you'll need here.

basflt

22nd July 2008, 16:21

thanks tex88

ihave correct map properly pathed
tryed at least 7 different .cap's but problem remains
lack of memory they wont install

[ or rather install wont complete ]
asked to touch screen
set left/right handed
set time
and thats it

Tex88

22nd July 2008, 17:53

Download TT_Nav_7.450.9028_repack3.7z, unpack with WinRar, pick one of the cabs, move it to your memory card, INSTALL on the memory card, if possibly.
And move all the files in the voices folder to a voices folder on the memory card.

basflt

22nd July 2008, 18:07

basflt

22nd July 2008, 18:33

as i expected ; same result

as i remember cf card was a bit faster than sd card

Tex88

22nd July 2008, 19:43

the internal card is actualy a 4GB compact flash card
i know since i recently replaced original 2GB

and no that is not the course sinse version 5 and 6 work perfect and also latest mio system

however if you think installing on sd card makes a differant ill try anyway

Well, it made on mine. HTC kinda skimped on the internal memory on the Wing. But seriously, it should work. That one only has a 200 Mhz CPU, and 7 is actually faster on it than 6 was.

basflt

22nd July 2008, 20:17

software is very hardware depending
just cannot install anything onto anything
ive read on other forums and never see anybody say he managed
if its not mem it is something else
in the last 3 year i found this device is a strange thing
even mio cannot deal with it properly
it is not for nothing everybody wants tomtom in it
however i think i forget v7 for a while
using it just fun [ motor]
at work i use my go7.10
thanks for help anyway

not that anyone cares but include a photo of the stupid thing

notovich

22nd July 2008, 23:33

Please help, spent 3 days searching for map of UK for my Diamond (tt7.450) please help me to find it.
Thank you in advance.

ad_d

23rd July 2008, 00:17

Please help, spent 3 days searching for map of UK for my Diamond (tt7.450) please help me to find it.
Thank you in advance.

ANY v7 map will work with tomtom 7 for the diamond, I'm using the tt7 repack 3 install on my mio p550 and p350 with the v720.1803 map originally downloaded for my 920.

Basically if the map starts v705, v710, v715, v720 it will work for you, do not look for versions specific for the diamond, you'll not find any.

Download a map (eg v720.1803 europe) then use the Easyusetools to create the correct .dct file for it to work with your tomtom 7 (you'll need your device code to get it done).

Lots of instructions for using Easyusetools on this site, even a video tutorial.

Tex88

23rd July 2008, 00:47

http://www.ipmart-forum.com/showthread.php?t=272506

brooklyn

23rd July 2008, 00:54

Please help, spent 3 days searching for map of UK for my Diamond (tt7.450) please help me to find it.
Thank you in advance.Search:forsaken:

http://www.rapidshare.com:80/users/7r7wvk

oakleyscar

24th July 2008, 08:13

Thanks for the help GadgetChick,

I'm still stuck... anyone else able to offer advice?

Here's more info...
the maps are version 7.20
I tried both US & UK English, didn't seem to make any difference.

I have installed TTN7 onto my storage card.
Path: Device\storage card\Program Files\Navigator\*
The map folder is in the root of the storage card.
I also have a voices folder in the root of the storage card, with TTN6, I think I needed to copy them to a different folder to get them to work...

What comes next?

gohan80

24th July 2008, 09:47

during TT7 installation it sais that only one version should be installed, so I would suggest you to remove the TT6 since the TT7 is still able to read older maps.
I have the voices folder in the root of SD card and they work.

oakleyscar

24th July 2008, 10:07

Thanks Gohan80.

I made sure I removed the old TTN6 folders that were there, and then re-installed TTN7, but still get stuck at the same spot. after going thru the setup options, I get the error "activation failed. Sorry, this is not the correct activation code for the product 'australia' '

I feel like I'm going in circles...

gohan80

24th July 2008, 15:04

have you used the easyusetool and created the right .dct file for your map by using you current deviceID and meta code for the map?

dextersj

25th July 2008, 00:26

hi,
can anyone give a step by step waltrougth to get tomtom 7 working with the htc touch diamond.
the installation is no problem but i can't get the maps to work.
thanks guy's:thanks:

Tex88

25th July 2008, 00:27

http://www.ipmart-forum.com/showthread.php?t=272506

dextersj

25th July 2008, 01:15

:wave: WOW THNX!
how can i not have seen this thread allready?stupid me.:punish:
thnx tex88:thanks:

oakleyscar

25th July 2008, 03:50

have you used the easyusetool and created the right .dct file for your map by using you current deviceID and meta code for the map?

Hi Gohan80,

:thanks:

I grabbed and used the easyusetool and now I am up and running.

Thanks for your help.

Oakleyscar

:urtheman:

rskiki

25th July 2008, 04:04

Hi guys I've got a problem I've tired to activation North_America_720_1803 with the easytool but it's not recognizing the meta file from the map folder (North_America-13) any idea how to get it to activate it. Any suggestions will be appreciated. Thanks and keep up the good work guys.

gohan80

25th July 2008, 10:48

did you get the correct meta coda from here?
http://www.ipmart-forum.com/showthread.php?p=2150598

Or just upgrade to navcore 8 and maps v.8

gert5539

26th July 2008, 00:54

tomtom 7 maps for southern africa. is there such a thing ?????????

pogo007

31st July 2008, 12:46

Hello to all,

i have copied the 4 files from the latest archive here http://rapidshare.com/users/9HRQAC to my map-folder "Western_and_Central_Europe-720.1803" and activated the map share option at tt7 on my tytn 2. Is there any possibility to check if the copied map-share files work?

Do i have to install tomtom home to check?

Thanks for your help!

greets

pogo

martpaul

31st July 2008, 15:53

hi, i got a tomtom v3 device and i like to instal igo8 in the device it's possivel?
thanks in advance.

claymores

31st July 2008, 23:55

Having a lot of trouble. Tried every .cab around for TT7.

Just to confirm that SPV M600 (htc prophet) does that work with TT7 at all?

rusigor

1st August 2008, 01:17

claymores
Why not if my wizard does?

claymores

1st August 2008, 11:49

claymores
Why not if my wizard does?

No idea, tried repack1, repack2, repack3. vga and qvga also.

Shows it is installing asks me where it wishes to install, select SD card, then 3/4 way though it shows where it wishes to be installed again. Select SD card again and it fails (select device it fails again).

It has standard WM5 on the device so im not sure it that is the problem. However TT6 worked perfectly fine, just TT7 wont install.

Any ideas on what is going wrong on it?

Tex88

1st August 2008, 16:35

Let it install in main memory then, and move the entire program folder to the memory card after that. Let's see what happens :)

Scorpio_cz

1st August 2008, 23:27

I have made TT7 working even on non-touchsceren device - smartphone iPAQ514 with WM6, FW 2.0.5, fakecursor and unlocked SDA.

For installation problems, which I also faced, I made just unpack and rename of the files from CAB. It works like a charm, in fact TomTom does NOT need any kind of "system integration". The only what you loose is a "homescreen" plugin.
I think most of us can live without it.

Tex88

1st August 2008, 23:31

The only what you loose is a "homescreen" plugin.
I think most of us can live without it.

The strange thing is, with exactly the same installation file used (repack 3, blue), I have a Today plugin on my Wing, but not on the Axims. :confused:

rusigor

1st August 2008, 23:53

And I don't need home plugin at all (however I have it) - I mapped one of hard keys to launch TomTom - and it works perfect

mvitake

3rd August 2008, 00:05

TT7 works fine on HTC Wizard (Qtek 9100) using Win 6.1 with map Western_and_Central_Europe v720.1803

This is interesting, cause I just spent 2 days trying to get it running, and only get the "not enough memory" error.

Can you please pm me the tt7 exe file which actaually works on a Wizard with Win 6.1 and Western Europe (please)!

Thanx in advance.

Scorpio_cz

3rd August 2008, 00:17

This is interesting, cause I just spent 2 days trying to get it running, and only get the "not enough memory" error.

Can you please pm me the tt7 exe file which actaually works on a Wizard with Win 6.1 and Western Europe (please)!

Thanx in advance.

Don't you have your device in "flight" mode ?
Try to start BT and/or WiFi wireless before you launch TomTom7.

rusigor

3rd August 2008, 01:01

This is interesting, cause I just spent 2 days trying to get it running, and only get the "not enough memory" error.

Can you please pm me the tt7 exe file which actaually works on a Wizard with Win 6.1 and Western Europe (please)!

Thanx in advance.

And it works for me with WM6 and Western-and-Eastern_Europe-720, Eastern_Europe-720 without any probs.
Don't you mind to do HR?

stephenb

3rd August 2008, 02:08

Can anyone post the executable for TTN 7.450.9030 Is there a patched version?

TommTomm

3rd August 2008, 02:23

http://www.megaupload.com/?d=EYJ7F2NN

Try this one. But I can nothing promise that this works.

Greets TommTomm.

V3xx

3rd August 2008, 10:34

Try this one. But I can nothing promise that this works.

Greets TommTomm.

Not working if you dont patch it where to find that, but is 9030 version

OT: where has ppcwarez gone??

DB7000

3rd August 2008, 12:51

Try to install this version TomTom_Navigator_7.450.9028_repack2.cab

V3xx

3rd August 2008, 13:40

Ye... i have that version already but is there a patch for build 9030 version?

vvgrp

3rd August 2008, 17:20

Can anyone post the executable for TTN 7.450.9030 Is there a patched version?

Here is the Navigator folder working. I found it at another site. You need to copy it and paste it to the storage card. All you need to do is change ttnavigator.bif file with your device id. Then run the program.

http://rapidshare.com/files/134532681/Navigator.rar.html

Sorry, it is for 7.450.9028, not 9030.

What is the difference?

nofences

4th August 2008, 01:55

Sorry, it is for 7.450.9028, not 9030.

What is the difference?

9030 is compatible with TomTom Home software. older versions are not.

donavenue

4th August 2008, 15:26

hi all,
wanted to know where can I get a tomtom 7 for my p990i
?

daumrimas

4th August 2008, 17:16

Ye... i have that version already but is there a patch for build 9030 version?
Please upload that version to Rapidshare.
I think, we find the doctor...

TTuser

4th August 2008, 17:35

The Doctor is already in your House
copy the .cab or only ttnavigator.exe (remove space from name) to Folder insert_meta_from_Map_here, run runmefor-allauto or -dct, done
http://www.ipmartforum.com/showpost.php?p=2086254&postcount=58
(with a older Version need you to rename it to .dll or it recognizes it not)

Tex88

4th August 2008, 19:36

superduper

4th August 2008, 20:03

@Tex88

that's exactly what TTUser is talking about. I will let you know details in 15 minutes. Stay cool.

EDIT:

Check your PM.

stephenb

4th August 2008, 20:59

Do you have any further info on 7.450.9030 patched version for ppc?

stephenb

4th August 2008, 21:02

@Tex88

that's exactly what TTUser is talking about. I will let you know details in 15 minutes. Stay cool.

EDIT:

Check your PM.

Superduper, do you have access to a patched version of 7.450.9030 that allows it to install on PPC? Or is this about pathing it to use the DCT generated in Easytools?

superduper

4th August 2008, 21:22

Gentlemen,

7.450.9030 is owned.

stephenb

4th August 2008, 21:28

Gentlemen,

7.450.9030 is owned.

Sorry, I may be dense, but what do you mean by "...is owned."?

superduper

4th August 2008, 21:42

well, I see no complains re map activation anymore ;)

Proxyon

4th August 2008, 22:02

I have a samsung sgh-i780. Installed black ver. of tt7. All working fine. but a can´t get a fix on the internal GPS. But a BT GPS working great, fix on 5sec. Why?

I can only get gray stapels when i look in the info for sat. on tt7 when connected to internal gps.

I tried to have it on for over 60 min.

Help me...

TTuser

4th August 2008, 22:39

Superduper, do you have access to a patched version of 7.450.9030 that allows it to install on PPC? Or is this about pathing it to use the DCT generated in Easytools?
I think you mean with "patched" a Mappatched to use stolen Maps seems you mean something different, next time better direct exactly explains:confused:
Try this one, i remove again cpu install Lock, possible is it enough for you.
http://rapidshare.com/files/134826474/TT_Nav_7.450.9030.rar

Scorpio_cz

5th August 2008, 00:12

Try this one, i remove again cpu install Lock, possible is it enough for you.
http://rapidshare.com/files/134826474/TT_Nav_7.450.9030.rar

Hello TTUser, this one is not compatible with my iPAQ 514, it says it's incompatible with the device.
Do you know which byte offset in this one sets compatibility ?

For version 7.450.9028 it was byte with offset 0x2AA520 HEX.

Version 7.450.9028 I can run most clones - repack2, as well as repack3 blue and black QVGA. I didn't get tested repack 1 however.

TTuser

5th August 2008, 00:46

this is only a original + stolen maps - cpu lock from .cab, more not

seems for me now on 002AA744

stephenb

5th August 2008, 01:38

Hello TTUser, this one is not compatible with my iPAQ 514, it says it's incompatible with the device.
Do you know which byte offset in this one sets compatibility ?

For version 7.450.9028 it was byte with offset 0x2AA520 HEX.

Version 7.450.9028 I can run most clones - repack2, as well as repack3 blue and black QVGA. I didn't get tested repack 1 however.

Scorpio,
If you get it to work on the Ipaq, will you post the patched file for others. You can PM me with info. Thanks.

vvgrp

5th August 2008, 06:19

I think you mean with "patched" a Mappatched to use stolen Maps seems you mean something different, next time better direct exactly explains:confused:
Try this one, i remove again cpu install Lock, possible is it enough for you.
http://rapidshare.com/files/134826474/TT_Nav_7.450.9030.rar

I also get "not compatible with your device" error on my Sprint HTC Touch. I would appreciate any help.

Scorpio_cz

5th August 2008, 09:28

this is only a original + stolen maps - cpu lock from .cab, more not

seems for me now on 002AA744

I am playing with the byte 0x002AA744 HEX.
It appears to be the correct one, or very similar.
It indeed stopped complaining about compatibility, but now the .exe silently dies instead :cry:

I will give it couple more tries/values, I will post the results later.

EDIT :
Results are negative, this binary does not run on iPAQ.

TTUser, if you have done any patching on the TomTom Navigator.exe, can you please PM me link to the original unmodified version of TomTom Navigator.exe 7.450.9030, so I can try the same byte tuning without any additional changes involved ? Thanks.

johnlamb2

7th August 2008, 03:09

DB7000

7th August 2008, 03:26

johnlamb2

7th August 2008, 03:33

Tried that, you reckon, repack 3 should solve the problem.

thanks

vvgrp

7th August 2008, 05:44

Hi, ive loaded TTN_7.450.9028 with United_Kingdom_and_Republic_of_Ireland_v720.1802

Everything seemed fine on my acer n35 pda, but when i click on tomtomnavigator.exe it sometimes work but sometimes says out of memory, and today whilst trying to navigate to an address it said out of memory and closed itself.

This is annoying since when i tried to load tomtom7 by clicking on tomtomnavigator.exe it carries on saying out of memory then closes.

Is there some patch or previous version like tomtom navigator 6, that will work with the new "United_Kingdom_and_Republic_of_Ireland_v720.1 802" map.

Any information appreciated
I dont think any patches have been applied since the fonts are big.

I had the same problem with TT7 7.450.9028. I tried every program/patch available out there, but had the same problem. Finally I found the "Navigator" folder that I c&p to my storage card, and it worked without problem. Here is the link.
http://www.ipmart-forum.com/showpost.php?p=2178990&postcount=398

I also had this problem with NA map with one particular voice, so I changed the voice and now I dont have that problem. You may want to try that.

superduper

7th August 2008, 09:43

http://www.ipmart-forum.com/showpost.php?p=2183551&postcount=56

qvga WM5/WM6 phones 7.450.9030

DB7000

7th August 2008, 12:50

Is there a BLUE TT7 version with Big Fonts ??

speedy29

8th August 2008, 12:57

SiRPower

8th August 2008, 22:52

Need help. I have all the US & Canada maps on my sd card but when I run TT7, I only see the US street names and not the Canada street names. Am I missing something here?

freednd

9th August 2008, 01:44

i copyed the Navigator Folder to my eTEN G500 and it works like a charm..
cant install it caus it reported "Device not supportet"

Does anyone know how to create a Today shortcut to start TomTom ?
is there a way to get TTS to work ?

**edit**

found repack3 .cab that i can install..
now i have the today link

Homer1

9th August 2008, 15:23

vvgrp

9th August 2008, 15:31

rusigor

9th August 2008, 17:06

Homer1
Your problem is similar to the one in this post - http://www.ipmart-forum.com/showpost.php?p=2188319&postcount=52 - read this topic, may be additional dll's will help you

rusigor

9th August 2008, 17:25

Homer1
and if it won't work - may be problem similar to this - http://4pda.ru/forum/index.php?showtopic=75764
All credits to U-2:
TomTom на hw6515 - не было проблем.
Поменял его на Motorola Q9h, поставил TomTom - пишет No GPS Device, подсветка гаснет.
Пришлось накропать маленький ланчер - он вызывает GPSOpenDevice() и SetPowerRequirement() до старта TomToma и ReleasePowerRequirement() GPSCloseDevice() после.
"TT on hw6515 - no probs. Changed to Motorola Q9h. TT writes No GPS Device, backlight goes off.
Wrote small launcher for myself - it calls GPSOpenDevice() & SetPowerRequirement() before TomTom starts, and ReleasePowerRequirement() & GPSCloseDevice() after

Homer1

10th August 2008, 05:15

First of all this site rocks! :D

secondly I have TTN7 installed on Samsung Omnia(in-built GPS) with latest v720 map all perfect, however, I have tried all GPSS settings, only selecting "Other GPS Device" finds 14 satellites, the problem is it never locks any of them and always shows "Poor GPS Signal" hoping someone had a similar experience and can share their resolve, thanks.

thanks to those who replied (eventhough it was no help) to get tomtom working on a Samsung device with a Qualcomm built-in GPS, just select other NMEA, 4800 baud, COM8 ... also, set External GPS in settings to COM8 port, not GDP8...

EDIT: This worked once and cant get it to work again....

wallistic

12th August 2008, 04:10

NMAB,

How did u install ur tomtom7? I have ipaq hw6915 but no tomtom 7application to work with it, it says not compartible.

Wally

wallistic

12th August 2008, 04:14

NMAB

:confused:How did u install ur tomtom7? I have ipaq hw6915 but no tomtom 7application to work with it, it says not compartible.:confused:

Wally

jet0112

12th August 2008, 10:54

You can get version 7.450 *LINK REMOVED*

seelion

12th August 2008, 14:28

sorry u need to be register ;(

parks

13th August 2008, 01:55

Hey Guys and Girls can someone please repost a working link to repack 3 of this version of tomtom? Thanks.:ilove:

lamboman

13th August 2008, 03:16

Homer1

13th August 2008, 15:54

This is a new working link for fully patched tomtom navigator 7 version 7.450

http://rapidshare.com/files/136897645/TT_nav7.rar

and here is the easyusetool

http://rapidshare.com/files/136897950/easyusetool_for_TT_nav7.rar

hope this is what you wanted

:confused:

EDIT: Again, worked twice and cannot work again, (with built-in GPS) I have Omnia with built-in GPS if anyone has any ideas please share it.

seelion

13th August 2008, 20:36

GodEagle

13th August 2008, 20:52

Im Confuse with all of this.......

I Already download most of the TT7 patched... and non patched... and when i tried to open TT7 non patch version the app open's without any problem... just i can't active the map, when i tried to open tt7 patch version it cames with a message that i do not have any memory available???? i do not understant this, couse i have very space on it???
can anybody help me?????
i'm desperated

lamboman

13th August 2008, 21:20

hi seelion
7.450 (9028) not sure about quickgpsfix though.

Hi GodEagle
check out this page http://www.ipmart-forum.com/showthread.php?t=275749

The above rapidshare download already has the modified navigator.exe file installed

gohan80

14th August 2008, 10:02

did anybody tested successfully the build 9030?

GodEagle

14th August 2008, 12:51

:) :) :thanks:ok i have no problem now to open TT7 nwith any message of Memory error.

Now I Have another problem.... when i tried to put a map on the sd card and trie to open in the tom tom freeze!!! and when i close the tt7, when i trie to openit again give me the same message, i tried to remove the map after this message and tt7 run's again? anybody know how to fix it?

Best Regards.

GodEagle

14th August 2008, 13:56

OK, after put another map on it... work.... ok working working working i did it :D tnnks for your help lamboman and everybody for help me :wave::weedman::thanks::partyman:

scottmo

14th August 2008, 22:33

hi,
i have tt7 working on my tytn II no probs... however i have heard about a black version - mine is blue - and would like this but can't find it.
can anyone help with a link or upload the cab?
thanks in advance.

Scottmo

gohan80

14th August 2008, 23:32

try on post 17 http://www.ipmart-forum.com/showpost.php?p=2102356&postcount=17

I have the black version running fine on mine Asus Mypal, but it is build 9028

scottmo

15th August 2008, 00:38

Thanks!
just got it and trying it now!
again, thanks for the quick reply and the help!
Scottmo

rusigor

15th August 2008, 01:01

did anybody tested successfully the build 9030?
Of course! It' working

scottmo

15th August 2008, 01:04

No luck!

tried the cab. TT starts but doesn't recognise the maps that the other version worked with (also TT7 but blue). Not a huge problem, gone back to my other version and working fine.

if anyone know what the problem might be let me know, if not, i'll stick with what i've got - just fancied black.

Scottmo

stephenb

15th August 2008, 01:50

Try this one. It's just the exe and you can replace the working exe you have with this one and it will be 9030 black.
http://www.ipmart-forum.com/showpost.php?p=2183551&postcount=56
:excited:

lamboman

15th August 2008, 01:59

Thanks stephenb,
Just installed your file to mine and it works great. Looks a lot better and seems to be a lot more crisper in black

:thanks:

scottmo

15th August 2008, 21:04

:excited:

THANKS! Stephenb.

Works a treat... maps work and the black, I think, looks nicer.

Scottmo

parks

16th August 2008, 20:04

Hi Guys any way of getting TomTom Services working? And is there any Uk Speedcams data around on the forums been looking for it but I can't find it. It would be good if there was proper tomtom speedcams. :thanks:

rusigor

17th August 2008, 01:14

[QUOTE=parks;2202602]Hi Guys any way of getting TomTom Services working? /QUOTE]
Do you mean TomTomHome services (from PC) or TomTom Services from the program?
If last one - you may look for phone.dll in PDA Windows folder. If you don't find it - create such a file with notepad (may be empty) - and put to Windows folder. Then you'll have TomTom Services working:LoL:

gohan80

19th August 2008, 13:53

Hi guys, I now noticed that after I installed the TOMTOM 7 the bluetooth on my asus mypal A696 no longer works. Any idea what could be the cause?

cockatoos

19th August 2008, 20:11

Hi guys, I now noticed that after I installed the TOMTOM 7 the bluetooth on my asus mypal A696 no longer works. Any idea what could be the cause?

did you first activate your bluetooth then installed TT7 otherway round gives you memoryproblem

cockatoos

20th August 2008, 12:28

did you first activate your bluetooth then installed TT7 otherway round gives you memoryproblem

Another forum entry:

I find out that TomTom7 places new BT dlls under the windows folder.

\windows\BtSdkCE30.dll

\windows\BtCoreIf.dll

remove or rename them and do a soft reset. after that everything works like normal.

Worked for me !

rleejr79

21st August 2008, 12:24

any crack for traffic? Just installed on my xv6800 HTC Verizon and it says that I have 12 days left. Also, downloaded Tom Tom Home from CNET and it will not connect to repack3 that I have with the 7.xx N.A. map that I have and it won't update as it says no updates, but that can't be so. Is there a workaround for that?

Zift

21st August 2008, 14:52

Another forum entry:

I find out that TomTom7 places new BT dlls under the windows folder.

\windows\BtSdkCE30.dll

\windows\BtCoreIf.dll

remove or rename them and do a soft reset. after that everything works like normal.

Worked for me !

This is an old problem with TomTom.
It turns PDA's to mute. Makes problems with BT......:confused:
Receipt is correct - it solves problems with muting. Just rename files to old BT.. and soft reset. I am doing it on hp IPAQ's when ever I have to install TomTom

Zift

21st August 2008, 21:18

Dear GURUS, please advise:
Can TomTom v7.450 (9030) open any other maps than v720. Especially EE 680 and 658?
Those were the last with Eastern Europe in. :confused:
:sorry: but CZ is not EE - Prague is more on the west than Vienna :sorry:
East is Serbia, Greece, Romania, Bulgaria....
I was searching but did not find usable compatibility matrix. If someone can make it - it will be of grate use.

rusigor

22nd August 2008, 00:51

Can TomTom v7.450 (9030) open any other maps than v720. Especially EE 680 and 658?
Depends on your device - WM5/6 - maybe, WinCE - no!
Those were the last with Eastern Europe in.
... but CZ is not EE - Prague is more on the west than Vienna
CZ - it's Central Europe!!!
A lot of maps including!

Zift

22nd August 2008, 10:38

Depends on your device - WM5/6 - maybe, WinCE - no!

CZ - it's Central Europe!!!
A lot of maps including!

:thanks: I know where Prague is. Just TomTom people are not sure: Map of Eastern Europe v7.20 ...Detailed door-to-door navigation is offered throughout the Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Slovakia and Slovenia...:sorry:
:backtotopic:
I have:
IPAQ 6515 = Windows CE 4.21
IPAQ 6915 = Windows CE 5.1
IPAQ 2490 = Windows CE 5.0
Can any of them open old maps? :afraid:

rusigor

22nd August 2008, 18:30

Map of Eastern Europe v7.20 ...Detailed door-to-door navigation is offered throughout the Czech Republic
So what wrong with this map? It does contain Czech Republic
I have:
...
Can any of them open old maps?
Not with TomTom7. Only with TomTom6

BTW You can install both versions on your PNA and use particular with appropriate map

And right topic for this question - http://www.ipmart-forum.com/showthread.php?t=275749

ask_j

23rd August 2008, 18:47

Hi,
I installed ttn7.cab on my ATT tilt, I was able to install that successfully and then download one map for free from tomtom website. Every thing is workinng on my tilt. Following are the details of the about screen

App Version - 7.450 (9028)
GPS Driver v1.20
Map Version - v7.15.1732 (one city of US)

I have following options
1. tt7 got installed on my main memory, can I install this on my storage card.
2. What other maps I need to get for US? Which are compatible with this app version?
Thanks in advance..

viper76

24th August 2008, 20:05

Hi all
Dose the LoquendoTTS works on the navigator 7?

if it dose can you please tell how to activated it

viper76

24th August 2008, 20:07

sorry double post

Tex88

25th August 2008, 01:57

2. What other maps I need to get for US? Which are compatible with this app version?

Get USA/Canada 720.1802, and copy in the POI.dat from North America 720.

viper76

26th August 2008, 23:28

Hi all
Dose the LoquendoTTS works on the navigator 7?

if it dose can you please tell how to activated it

anyone please

:suicide::suicide::suicide:

freednd

27th August 2008, 00:23

Hi all
Dose the LoquendoTTS works on the navigator 7?

if it dose can you please tell how to activated it

NO! not possible atm

looke81

27th August 2008, 02:04

Hi Guys, I'm not sure if its correct place for my post but,
I've problem with Navroad NR 430BT, TT 7 works fine (GPS signal, maps etcx.) but after few minutes of working navigation, there is windows window on full screen with lines "debug...." then when I pressed "X", window is closed and TT7 work again. This happend each time when I start navi. Maybe someone of You nnoticed similar problem?

cheers

ffernandes

27th August 2008, 03:36

does tomtom 7 work in nokia N95\/
Thank you
Dino

gohan80

27th August 2008, 10:31

Nokia N95 is not a pocket PC windows device: curretly for symbian only version 6 is available, but it does not work with the internal GPS ( you need to install a third program to allow tomtom to see the internal gps and you need to run it every time before the tomtom and configure everytime the tomtom to use the itnernal gps). You probably better look to the garmin mobile XT software.

freednd

27th August 2008, 11:24

does tomtom 7 work in nokia N95\/
Thank you
Dino

NO! NAvcore 7 is only for Windows Mobile.. no symbian version.. i dont think there will ever be a new symbian version..
:sorry:

ffernandes

27th August 2008, 16:40

many thanks
Dino

gohan80

27th August 2008, 17:32

Hi guys, I now noticed that after I installed the TOMTOM 7 the bluetooth on my asus mypal A696 no longer works. Any idea what could be the cause?

I solved by raplacing the TT6 install with the files from the TT7 for wince

marocboy

28th August 2008, 18:08

is there is any version for the HTC tynt ?
i would be glad of getting this

rleejr79

30th August 2008, 05:16

Anybody know or find the workaround for traffic?

Downloaded and installed repack3 but it says that my traffic sub is up 9/2

wallistic

30th August 2008, 13:44

Hi guys, i have ttn7 on my new htc diamond, it works well with UK&IE v6 maps. I need a working UK&Ireland map7 pls. Would appreciate a useful map pls.
:afraid:

wallistic

30th August 2008, 13:45

Hi guys, i have ttn7 on my new htc diamond, it works well with UK&IE v6 maps. I need a working UK&Ireland map7 pls. Would appreciate a useful map pls.
:afraid:

rleejr79

31st August 2008, 10:48

Hi guys, i have ttn7 on my new htc diamond, it works well with UK&IE v6 maps. I need a working UK&Ireland map7 pls. Would appreciate a useful map pls.
:afraid:

Search the forums, there are threads solely for maps only.

Ford Falcon

6th September 2008, 16:43

Hi Guys .. Tried to install on an Ipaq hx2190 and an Ipaq hw6515. :angry:
Message . . This version of TT not compatible with your device. :confused:

thanks anyway .. :thanks:

brooklyn

6th September 2008, 18:24

Hi Guys .. Tried to install on an Ipaq hx2190 and an Ipaq hw6515. :angry:
Message . . This version of TT not compatible with your device. :confused:

thanks anyway .. :thanks:Try this one it works on my old ipaq.

nav_7_repack_2_art_helpme.rar

http://www.badongo.com/file/11182927

Ford Falcon

7th September 2008, 08:54

Deleted Double Post.

Ford Falcon

7th September 2008, 09:09

Hi Guys - I kept persevering with this .. and finally had sucess .. I used the version posted at this link by lamer314 ... :urtheman:

http://www.anonym.to/?http://rapidshare.com/files/139685481/TT7_9028_PNA.rar

:urtheman:

This download is the CAB file already extracted so I didn't get any of the "This program is not compatible with your device" messages. All you have to do is unrar it and copy it straight onto your CF or SD Card. Then simply run the TomTom Navigator.Exe file which will open the program and tell you it can't find a map. No problem... just close it down and use notepad to open the .bif file it created so you can get the Unique Device/Card ID which you can then use in the Easytool to create the metadict file for the map you want to use. :triodance:

I have now got it working on my Ipaq hx2190b, Ipaq hx2190. :egdance:

It wouldn't run on an Ipaq hx2110 running wm2003 because it is too low on ROM memory, only 64kb. :suicide:
Same deal on the Ipaq hw6515 running wm2003 .. not enough memory to run TomTom V7 :forsaken:

Thanks to everyone who has worked very hard to get this running on PPC. I can now do all the nice things that Navcore 7.45 allows such as changing car icon, mapshare etc etc. :good2:

Ford Falcon

7th September 2008, 09:17

Try this one it works on my old ipaq.

nav_7_repack_2_art_helpme.rar

http://www.badongo.com/file/11182927

Thanks Brooklyn . . as you can see I got it going anyway . . but thanks for your offer of the one above. :weedman: It might help someone else. Or they might be able to use the one I ended up using .. its all a matter of trial and error in the end. :thanks:

dskum

10th September 2008, 04:51

Ford Falcon

10th September 2008, 05:35

Hey Guys - I'am new here to this forum. I've been using TT6 with V6 maps for sometime. Just thought of trying to run TT7 on a T-Mobile Wizard with v805 North America maps. Tried with the key gen.

It complains about no maps found. Is it not compatible? :confused: There are so many threads and I'am really confused on what version of maps TT7 is compatible on a Pocket PC (Win Mobile 5/6).

V6 Navcore on PPC >>> Only V6 Maps. :good2:
V7 Navcore on PPC >>> Only V7 Maps + V6 Maps above v6.75 unless PNA file of Map below v6.75 tweaked. :good2:
V8 Navcore (can't run on a PPC) >>> All Maps (But only on PNA) :weedman:

V8 Maps can't run on V7 Navcore so lose that map and get the equivalent V7 mapp. You only lose Lane Guidance, everything else is the same. :good2:

Hope this helps. :dance2:

maxym_urt

10th September 2008, 12:31

Hello. Anyone checked if W&CE map v725 2GB is working with TT7 on PDA?

I downloaded it, but crack included to this map alerts me, that meta doesn't match this map. Then I found another version of cracking tool (I believe newer). It did the job but TT says that serial is incorrect for this map.

I have v720 of this map and it's working. So what about 725?

I'll appreciate for any help

zippo876

10th September 2008, 19:42

Hi Maxym, I am using v725 on my XDA-Orbit, if you want I can upload it somewhere.
Zippo876

Hello. Anyone checked if W&CE map v725 2GB is working with TT7 on PDA?

I downloaded it, but crack included to this map alerts me, that meta doesn't match this map. Then I found another version of cracking tool (I believe newer). It did the job but TT says that serial is incorrect for this map.

I have v720 of this map and it's working. So what about 725?

I'll appreciate for any help

maxym_urt

10th September 2008, 19:57

Thank you.
Maybe a link to working Easytools and to the map downloaded by you would be enough.

but I can provide you ftp also to upload this stuff.
best regards

zippo876

10th September 2008, 20:16

Yes I can upload it, send me the FTP address.
Zippo876

zippo876

10th September 2008, 20:31

Yes I can upload it, send me the FTP address.
Zippo876

TTuser

22nd September 2008, 23:12

A tiny Bird(TommTomm) sent me this new Version

Attention, you need to use new v8Keygen (EUTool Option 1)

clean Version, only Mappatch and sig removed

freednd

22nd September 2008, 23:48

can someone plz patch the devicelock ?

i get the "your device is not compatible" message

thx

elroy944

23rd September 2008, 00:49

Anyone knows what is new in this version: ttnavigator 7.451.9033?

superduper

23rd September 2008, 06:54

please upload to RS or MU for distribution. thanks

gilinderi

23rd September 2008, 11:34

TTUser what is the difference between the v7.450 and v7.451? anything new or same stuff? and where do you get v8Keygen (EUTool Option 1).

thanks

brooklyn

23rd September 2008, 11:37

TTUser what is the difference between the v7.450 and v7.451? anything new or same stuff? and where do you get v8Keygen (EUTool Option 1).

thanksv8Keygen

http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58

TommTomm

23rd September 2008, 11:47

This is the new TTN from the HTC Diamond Pro. :egdance:

Greets TommTomm.

rioferraz

23rd September 2008, 15:06

A tiny Bird(TommTomm) sent me this new Version

Attention, you need to use new v8Keygen (EUTool Option 1)

clean Version, only Mappatch and sig removed

ttnavigator_7.451.9033.dlc.zip

How to use this file TTuser?

:thanks:

elroy944

23rd September 2008, 15:38

ttnavigator_7.451.9033.dlc.zip

How to use this file TTuser?

:thanks:

Download and install cryptload, open the .dlc file, Enjoy :)

pindur

23rd September 2008, 21:29

"Your device is not compatible with this version of tomtom"

by Dell axim x51v W 6.1

rusigor

23rd September 2008, 21:51

"Your device is not compatible with this version of tomtom" by Dell axim x51v W 6.1
as well on Wizard. Just waiting for guru to crack it from device-not-in-list dependence.:oops2:

rusigor

23rd September 2008, 22:39

"Your device is not compatible with this version of tomtom" by Dell axim x51v W 6.1
as well on Wizard. Just waiting for guru to crack it from device-not-in-list dependence.:oops2:

spetrie

24th September 2008, 00:54

can someone plz patch the devicelock ?

i get the "your device is not compatible" message

thx

Same for ipaq HX4700

rioferraz

24th September 2008, 00:59

In my QTEK 9100 don´t work too.

Must have been error at the time of extraction

darekmax

24th September 2008, 03:39

Hi,
on P560 don´t work too.

superduper

24th September 2008, 04:05

@ALL

This binary file is not compatible to anything but new HTC phones. Binary file has to be patched for handset compatibility first. Owners of non HTC and older HTC phoes: PLEASE STAND BY!

At this stage this binary file works really good for HTC Diamond, Touch Pro, Touch HD, Touch 3G owners (if any). HTC S740 is also in the list, but has not been tested. I assume that S740 will most like be supported.

Improvments over 7.450 (9030) noticed so far:

better GPS signal. could be something else. I will report more as soon as noticed.

zippo876

24th September 2008, 04:45

Hello guys, whats going on with your devices:angry:, why the TomTom 7.45 is not working, is it possible for one of you lot to upload the software to me so I can test it on my HTC-Artemis (XDA-Orbit) & HTC-Touch-Diamond (XDA-Ignito).
I am using:
Software: TomTom_Navigator_7.450.9028
UK Maps: United_Kingdom_and_Republic_of_Ireland_v725.1871

Regard
Zippo876

rioferraz

24th September 2008, 05:28

wallistic

24th September 2008, 13:08

Hey guys i got tt7.450 working with map on wm5 but lost all voices including phonecall. What do u thing i'm missing.

rusigor

25th September 2008, 03:01

TTMax

25th September 2008, 11:37

OK now - thanks to cuckoo from 4pda forum we have working 7451.9033 now - working well on my Wizard.

You'll find this version (now only qvga-blue, else comming soon) as well as all previous (7450.9028/9030) with all combinations in this *.dlc:
(all credits goes to rob, shoora, cuckoo and of course - TTUser)
TT7_pda (http://linksave.in/43529989748dac4b3adafe)
visitor/archive pass:
4pda

You can easily "customize" TTN7 build 7451.9033 to run in qvga black or blue, or VGA black.
For this , use an hexadecimal editor like Hexedit or Ultraedit, open TomTom Navigator.exe and modify displacement 2A8578h :

. 10h VGA Black
. ODh QVGA Blue
. 12h QVGA Black

I personaly use successfully Vga black on my Eten x800.
Enjoy

robert1982

25th September 2008, 18:17

Xiao81

25th September 2008, 21:09

Check this out :)
http://www.megaupload.com/it/?d=YTEXSRMT

spetrie

26th September 2008, 00:15

Still does not work on iPaq HX4700

stephenb

26th September 2008, 01:01

Still does not work on iPaq HX4700

It works flawlessly on both my HX4700 and my Ipaq 211.

rusigor

26th September 2008, 01:16

Can you upload 7.451.9033 version to rapidshare or megaupload.
So it IS on RAPIDSHARE. Only the links encrypted for Cryptload or JDownloader - in this way they live longer:LoL:

rioferraz

26th September 2008, 01:39

USE THIS:

Tomtom 7.451.9033 qvga blue

http://www.megaupload.com/it/?d=YTEXSRMT

VGA Version:

http://rapidshare.com/files/148231022/TT7.451.9033_Diamond_PRO.zip

KeyGen v7/8 maps and tomtom v7.451.9033 (the v8 maps will not work on v7.451.9030, but you need the new KeyGen for the v7 maps):

http://rapidshare.com/files/148231685/KG_TT8.zip

jactheripper

26th September 2008, 03:55

Just tried 9033 on HTC Artemis and it said it was not compatible with this device.

jactheripper

rusigor

26th September 2008, 10:51

Just tried 9033 on HTC Artemis and it said it was not compatible with this device.

jactheripper
So why don't you use cracked version from my post above?

robert1982

26th September 2008, 12:24

So it IS on RAPIDSHARE. Only the links encrypted for Cryptload or JDownloader - in this way they live longer:LoL:

Thanks, i tried cuckoo version from your link and it works on Trinity.

snakecharmer

26th September 2008, 14:05

I installed -->> Tomtom 7.451.9033 qvga blue

http://www.megaupload.com/it/?d=YTEXSRMT

on my Qtek9100 overwriting the older version 7.45.9028 and it works like a charm.:dance2:

PS: i used the new easytools for the v.8 maps to activate the maps v.7.25

:ilove:

msp23

27th September 2008, 04:09

is it possible to change the icon and font size with an hextool in the tt.exe?

bovirus

27th September 2008, 10:39

Is it possible to use Map 8.xx with latest 7.450.9033 TT Navigator?

rusigor

27th September 2008, 15:46

bovirus
no, only TT7 - like for previous 9028/9030 builds

2yyiam

27th September 2008, 16:22

I am having a tough time trying to install TT7 on my HTC TyTN II.
I downloaded the cab file from this forum (v7.450 9028) and then followed the tutorial available in another thread in this forum.

I managed to generate a dct file for my map using the tt7_keygen.exe program via MS-DOS. However, I am now stuck for the next part of the install when trying to complete the patch.

After installing the cab on my phone, it doesn't install a "ttsystem" file which is necessary for the patch. What is going wrong? Where can I get it from? Without it I can't progress and can't get my map activated.

Thanks

puca

28th September 2008, 02:09

ex300s

28th September 2008, 03:21

2yyiam

28th September 2008, 17:43

try and do a bit more reading 2yyiam the navigator.exe is the same as the ttsystem file for the pocket pc it is already patched you only have to make your dct file for your map there is no patching of the navigator file

I've made the dct file,copied it into the map folder on my storage card and TT7 said the map was not activated, which is why I thought I need to patch the ttsystem file, even though it doesn't seem to exist.
What should I do?

Gerrit53

29th September 2008, 02:55

Hello, I am a dutch men (speak bad englisch).
I have a MIO 168 with TT Navigator 6.75 and Western Europe en now a will have TT 7, please can you give me links voor de WE card en the navcore ?
Thank you. :good2:

DB7000

29th September 2008, 08:33

I've made the dct file,copied it into the map folder on my storage card and TT7 said the map was not activated, which is why I thought I need to patch the ttsystem file, even though it doesn't seem to exist.
What should I do?

PDA's don't have a ttsystem file. You need to use tt8_keygen.exe instead of tt7_keygen.exe to activate a map. (Only if you use 7.451.9033)

2yyiam

29th September 2008, 14:48

PDA's don't have a ttsystem file. You need to use tt8_keygen.exe instead of tt7_keygen.exe to activate a map. (Only if you use 7.450.9033)

I've tried looking in the forums, but could anyone please provide a link for tt8_keygen and also, TT version 7.450.9033
I presume I use the tt8_keygen in the same way as tt7? (i.e. cmd function etc)
Thanks

bovirus

29th September 2008, 15:56

I red the info about TT( Keygen for the use with 7.450.9033.

But TT( Keygen is for Map 8.xx and TT 7.450.9033 doesn't support map 8.xx!

Where is the misunderstanding?

DB7000

29th September 2008, 17:18

rusigor

29th September 2008, 17:21

I red the info about TT( Keygen for the use with 7.450.9033. But TT( Keygen is for Map 8.xx and TT 7.450.9033 doesn't support map 8.xx! Where is the misunderstanding?
There's no misunderstanding - only that 7451.9033 version needs activation *.dct files generated by keygen option "8010 and higher".

Misunderstanding - is activation maps 8.xx - nevertheless! You can use it for activation both 7.xx & 8.xx on devices with navcore 8.010 and higher.
Don't mess it map versions!

2yyiam

29th September 2008, 17:24

Oke, to activate a v7 map;

TT7 Version 7.450.9028 Needs tt7_keygen.exe
TT7 Version 7.450.9030 Needs tt7_keygen.exe
TT7 Version 7.451.9033 Needs tt8_keygen.exe

And for all 3 version you can only use V7 maps, v8 will not work.

I've used tt7_keygen.exe for versions 7.450.9028 and even though it generates a .dct file for my map, I still can't use it in the program, it says map not activated!
I will try to use tt8_keygen.exe for version 7.451, but does anyone have a link for it?
Thanks

DB7000

29th September 2008, 17:31

TT7 Version 7.451.9033

http://www.megaupload.com/it/?d=YTEXSRMT

2yyiam

29th September 2008, 17:54

TT7 Version 7.451.9033

http://www.megaupload.com/it/?d=YTEXSRMT

Thank you, is there a link for tt8_keygen as well?

DB7000

29th September 2008, 18:11

Thank you, is there a link for tt8_keygen as well?

tt8_keygen is in the same zip file, open the map EasyUsetools and run RunMeforDCT.cmd and then choose option 1.

Gerrit53

29th September 2008, 18:27

Is this TT7 Version 7.451.9033 compatible with a MIO 168 with WM ?
En can you please give me the link "V7 map from WE or Benelux" for this PDA ?

2yyiam

29th September 2008, 18:35

Would you be able to porivde me with a guide on how to use the easyusetools?
I have the western europe map and meta.text file. How do I then use the RunMeForDCT cmd program? What folders do I need to put everything into?
Do I need to create a meta.text file with the map key only, not the rest of the keys provided by the link?
Sorry to trouble you, but do you have time to provide a guide for me?
Thanks!!

DB7000

29th September 2008, 19:18

DB7000

29th September 2008, 19:24

Is this TT7 Version 7.451.9033 compatible with a MIO 168 with WM ?
En can you please give me the link "V7 map from WE or Benelux" for this PDA ?

Hallo, Gerrit, here is the Benelux map version 725_1883

http://www.anonym.to/?http://lix.in/-29a805

I don't know if it will work on a Mio, just try it and let us know.

2yyiam

29th September 2008, 19:53

First open the folder Easyusetools,
Then you will see the next files/folders, if not then create them.

- insert_meta_from_Map_here (This is a folder)
- Progs (This is a folder)
- ttsystem_Patcher (This is a folder)
- DeviceID.txt
- RunMeforAllAutomatic.cmd
- RunMeforDCT.cmd
- RunMeforMetaKey.cmd

- Put the *.meta file in the folder called insert_meta_from_Map_here.
- Next, put the meta.txt file in the folder Progs. (overwrite the old one).
- Run RunMeforDCT.cmd Choose option 1 and again option 1 then enter your device code, if everything goes well, the .meta.dct file is created in the folder insert_meta_from_Map_here.
- Copy the .dct file to your Western Europe folder.

Thats it.

Thanks for the guide. Here's what happened:

I copied the meta file from Western_Europe_1GB map into insert_meta_map_here folder and also the meta.txt file into the Progs folder.
After clicking on RunMeforDCT.cmd and choosing option 1 and then 1 again, I got the following message:

### Run Fake meta.txt Check ###
Fault in Check_META_Integrity ...Western_Europe_1GB.meta - corrupted
### *.meta is not original ###

Enter devicecode here, without Space...

After entering the device code, the program created a dct file, which I copied back into the folder on my Storage Card, but no success, I still get the same message, "this is not the correct activation code for this map"

Could there be a problem with the map I downloaded?

DB7000

29th September 2008, 20:05

I think your .meta file is corrupt, what map version do you have?

Western_Europe_1GB_v725.1905 ??

I can upload the mata file then.

2yyiam

29th September 2008, 20:07

I have Western_Europe_1GB_710_1561

Do you have a link for the 725 version? I'll try downloading that. I've looked in the link below, but cannot find a working link!

http://www.ipmart-forum.com/showthread.php?t=226076&highlight=western+europe&page=39

Thanks

DB7000

29th September 2008, 20:17

It's a .dlc file so you need the prog Cryptload.

Map Western_Europe_1GB_725_1905

http://linksave.in/190094444248c66a80e264e

2yyiam

29th September 2008, 20:40

Can't seem to download CryptLoad from Rapidshare - being slow as usual!
Will try to download the map once I get Cryptload working and try again.

Thanks for all your help today, will let u know how I get on!

2yyiam

30th September 2008, 13:56

I downloaded the v725 map, used the RunMeforDCT as advised, created the dct file, transfered it all to the storage card and... lo and behold it worked!!
Thanks a lot for your help, the map works!
Now, one final query, I want to add speed cam POIs, but am having trouble. I've downloaded the latest radar folder from this forum, used CMD and tt8_keygen to create dct files for the camera files and then copied it into the map folder, but can't seem to activate the POIs.
Any help would be greatly appreciated, thanks

DB7000

30th September 2008, 16:30

The speedcam option is on another place to activate.

Go to the menu then Page 3, TomTom Services, choose TomTom Safety Cameras, then check if they are Enabled.

vnt2

30th September 2008, 17:01

Gerrit53

1st October 2008, 00:00

Hallo, Gerrit, here is the Benelux map version 725_1883

http://www.anonym.to/?http://lix.in/-29a805

I don't know if it will work on a Mio, just try it and let us know.

Fine, thank you...but now the password ? :confused:

DB7000

1st October 2008, 02:32

Fine, thank you...but now the password ? :confused:

ofcourse :good2:

password www.files4you.net

META:

98 07 82 EC 68 A2 A3 96 55 D7 A4 D4 82 74 D8 CA Benelux-17.meta
; Benelux_725_1883

2yyiam

1st October 2008, 17:37

The speedcam option is on another place to activate.

Go to the menu then Page 3, TomTom Services, choose TomTom Safety Cameras, then check if they are Enabled.

Everything seems to be working fine, need to go on a drive and see if the safety cameras work.
Thanks for all your help!

I've been browsing through the various threads trying to work out how to get TomTom HOME to recognise the map on my phone.
I have version 1.5, which seems to be too old, where can I get a up to date version and do I need to then patch the software in order for it to recognise my map?

Thanks

msuk

1st October 2008, 19:19

thank you for this. this worked perfectly on my tilt/kaiser.

I am using WM6.1 TT7 with Western.and.Central.Europe.v720.1803 and I get an not enough memory error - any ideas?

Thanks

msuk

1st October 2008, 19:20

For those who want the app for HTC devices, here is a link containing both TT7 and the map patchers + instructions based on TTUser files. It works on Tytn II which I have tested on.

http://rapidshare.com/files/123883031/TomTom7_WM6.rar

I am in full agreement with Superduper, this is a very clean version.

I am using WM6.1 TT7 with Western.and.Central.Europe.v720.1803 and I get an not enough memory error - any ideas?

Thanks

DB7000

1st October 2008, 19:52

I've been browsing through the various threads trying to work out how to get TomTom HOME to recognise the map on my phone.
I have version 1.5, which seems to be too old, where can I get a up to date version and do I need to then patch the software in order for it to recognise my map?

Thanks

First get this Home version and install it and register yourself on the TT site.
If you created an account then go to MyTomTom and change your nav system to Go720.

http://download.tomtom.com/sweet/application/home2latest/TomTomHOME2winlatest.zip

You need to install only the TT7 app on your phone/pda memory, not on the internal storage/SDCARD.

For more info read this post,

http://www.ipmart-forum.com/showpost.php?p=2116969&postcount=220

2yyiam

7th October 2008, 22:27

Everything seems to be working, map is cool and TomTom Home seems to sync ok.
Thanks for all your help

SiRiOS

10th October 2008, 10:28

Stephane13

12th October 2008, 16:39

TT asperin v0.1c by SiRiOS 2008
http://rapidshare.com/files/152578273/TT_asperin.rar

Work on ТТsystem v7 and v8 for all devices (PDA, All in One)
and work with XP, Vista

meta.txt
http://rapidshare.com/files/150244119/Meta.txt

tray and testing
if found mistake or a new idea, write: tomtomone@inbox.lv

Good morning,
I try to install an error of activation tt7.451.9033 with http: // rapidshare.com apparait meta.dct in spite of the file which belongs create and that I put in the root. Somebody can help me for the installation of tt and what software to use?
thank you

rioferraz

12th October 2008, 16:53

LeClair

12th October 2008, 19:16

Last version PDA TomTom7 ? TT 7.450.9028 or ?

DB7000

12th October 2008, 19:19

You can activate maps with it.

bull12

12th October 2008, 23:17

Hi guys, does anybody know if the TT7 work on Nokia & Symbian (with or maybe without external GPS)?

eric_cymok

13th October 2008, 16:12

Hi, I currently using O2 atom WM6.1, and I already installed the TOM TOM 7 GPS software but it shown no GPS signal. Can anyone expert tell me how can i connect it. Thank you

DB7000

13th October 2008, 16:25

Goto the menu,
Change Preferences,
then goto page 6 and select Show GPS status.
Click on the Configure botton and check if it's using the Built-in GPS receiver.

:good2:

Knotty

16th October 2008, 15:22

DB7000

16th October 2008, 15:24

When I use the instructions above TT still says 'No Maps Found'

PPC
TT v7.451.9033
Map North America 720.1083

Because you are using TT v7.451.9033 and this version needs keygen8 instead of keygen7.

So use keygen8 and try again ;)

Knotty

16th October 2008, 19:40

Because you are using TT v7.451.9033 and this version needs keygen8 instead of keygen7.

So use keygen8 and try again ;)

Already tried this and TT still says 'No Maps Found'

rusigor

17th October 2008, 02:33

A couple of days I use my Wizard with TT7451.9033 to update most of maps (I've installed them on 2 SD-cards - 4GB+1GB) by TTHome without fake-device.
I would like to share this technology to forum, but not sure I would. Wondering, how a plenty of people can't just read instruction and activate maps. And what would happen if they'll try to update maps, using hacks to crack TTHome and their PDA?

As an author of idea wrote - it's much easier to update maps by using updates from rapidshare - just download using http://www.ipmart-forum.com/showpost.php?p=2243331&postcount=4 links and copy to your map.
So just don't know...

ex300s

17th October 2008, 13:30

................... much easier to update maps by using updates from rapidshare - just download using http://www.ipmart-forum.com/showpost.php?p=2243331&postcount=4 links and copy to your map.So just don't know...
Looks nice!

The difference between 2.4&2.3 may be the compression? if it have differences in corrections amount it will be interesting that someone upload the 2.3 home version for us.
Great work

rusigor

17th October 2008, 15:08

Looks nice!

The difference between 2.4&2.3 may be the compression? if it have differences in corrections amount it will be interesting that someone upload the 2.3 home version for us.
Great work
Do you mean TTH2.3 installation? http://rapidshare.com/files/154651905/TomTomHOME_23192.rar
BTW - the list of corrections amount (19maps) attached to the post http://www.ipmart-forum.com/showpost.php?p=2243331&postcount=4 now
May be someone can compare with TTH2.4 ones - I found out that using TTH2.3 & TTH2.4 causes incorrect mapshare work for both versions. So I uninstalled TTH2.4...

ErichG

17th October 2008, 16:24

Help, :confused:

i search for a Tevion 3000 PDA with WinCE 4.2 a TT7 Navigator.
All what i found breaks with "not enought memory"

I hope one people can help me.

My english ist not the best, :sorry: for this. I hope all understand me.

sincerely

ErichG

rusigor

17th October 2008, 17:03

i search for a Tevion 3000 PDA with WinCE 4.2 a TT7 Navigator.
All what i found breaks with "not enought memory"
There's No PDA with WinCE 4.2
You have PNA - look appropriate thread - http://www.ipmart-forum.com/showthread.php?t=275749&page=32
They found solution for most devices of your type

ex300s

17th October 2008, 17:14

Do you mean TTH2.3 installation? http://rapidshare.com/files/154651905/TomTomHOME_23192.rar
BTW - the list of corrections amount (19maps) attached to the post http://www.ipmart-forum.com/showpost.php?p=2243331&postcount=4 now
May be someone can compare with TTH2.4 ones - I found out that using TTH2.3 & TTH2.4 causes incorrect mapshare work for both versions. So I uninstalled TTH2.4...
:nod:
now is clear for me, many thanks other time

brooklyn

19th October 2008, 14:45

Repack_3 support for version 6/7 maps. http://www.savefile.com/files/1846980

http://www.ipmart-forum.com/showpost.php?p=2311581&postcount=320

rajab2

21st October 2008, 02:36

Hi all, Greetings
I have been searching like crazy for a patched tomtom7 file that will work omn muy samsung omnia runnig windows mobile 6.1. Installed a 7.450 (9028) version , on the handset device but I getting "not enough Memory" when I try to run the program. Is there a patched file that will not keep giving this message? pls upload if an y one has a working TT7 file for samsung Omnia i900 wm6.1
thank you

DB7000

21st October 2008, 04:50

rajab2

21st October 2008, 05:35

Hi DB700
downloaded this file , I see 8 caB files when unzipped and no TT logo. how to I put this on the samsung omnia i900?

DB7000

21st October 2008, 12:04

Hi DB700
downloaded this file , I see 8 caB files when unzipped and no TT logo. how to I put this on the samsung omnia i900?

No, don't unzip the .cab file, just transfer it to your phone and then install it from there.

wocao

16th November 2008, 03:07

I have almost tried all methods here. But tt7 still says No Maps Found! Even the free map I just download through tt7.

I am using HTC diamond. tt7.450.9028

Can anyone help, please.

jactheripper

16th November 2008, 05:07

wocao

What map versions are you running?
What have you done so far?
Where have you put the maps?

jactheripper

TTMax

16th November 2008, 11:32

I have almost tried all methods here. But tt7 still says No Maps Found! Even the free map I just download through tt7.

I am using HTC diamond. tt7.450.9028

Can anyone help, please.

To use v815 maps on a PDA, it have to be at software version 7.910.9185.

You can find it here on this forum.

wocao

16th November 2008, 12:28

wocao

What map versions are you running?
What have you done so far?
Where have you put the maps?

jactheripper

I am using Scandinavia map, I believe it is 720.

I put the tt7 in the phone, and put the map on the storage card.

I tried note_prj.dll with many versions. patched tomtom navigator.exe, and keygen for the map.

jactheripper

16th November 2008, 18:00

wocao

Did you just put TT on your phone or did you use a cab file to install it?

theripper

wocao

17th November 2008, 01:26

I used cab to install it. and it can only be installed on the phone memory, not on the storage card. Otherwise, it says no enough memory to run it.

r8zer

17th November 2008, 02:54

thats not true i installed on storage card no problem at all.

jactheripper

17th November 2008, 04:33

Can you remember which cab file you used as I have installed it on 3 HTC artemis phones, an IPA 2490 and an Acer N35 and they all work perfectly

jactheripper

wocao

19th November 2008, 01:23

TomTom7-v7.450.9028-RP3

onestoptakea

19th November 2008, 12:46

May I know can TomTom 7 be use on WM2003SE ? My existing V6.75 map is too old already but newer v7 or 8 maps won't work on my TomTom v6.203.

sjdxda

19th November 2008, 13:54

May I know can TomTom 7 be use on WM2003SE ? My existing V6.75 map is too old already but newer v7 or 8 maps won't work on my TomTom v6.203.

Shouldn't be a problem I have just installed TTn7 7910 9185 qvga cab onto an 02XDA II mini running WM2003SE with V815 2059 map.

Cheers

onestoptakea

19th November 2008, 13:59

Shouldn't be a problem I have just installed TTn7 7910 9185 qvga cab onto an 02XDA II mini running WM2003SE with V815 2059 map.

Cheers

So which TT7 ver are you using? Can post the thread link so that I can download to try too.:thanks:

sjdxda

19th November 2008, 14:10

So which TT7 ver are you using? Can post the thread link so that I can download to try too.:thanks:

http://www.anonym.to/?http://rapidshare.com/files/162539796/TT7_910.9185_QVGA_black_.cab_.zip

Look in the Thread "TomTom 7 (7910.9185) PDA" in this forum

This same cab also works on my o2XDA Atom Life.

Hope I have been of help.

BTW take your time finding the 815 cersion of map that works on this version of TTN7. Not all 815 version maps will work.

Take Care

PS Password for any file: elrincondedey

onestoptakea

19th November 2008, 14:13

onestoptakea

19th November 2008, 14:31

http://www.anonym.to/?http://rapidshare.com/files/162539796/TT7_910.9185_QVGA_black_.cab_.zip

Look in the Thread "TomTom 7 (7910.9185) PDA" in this forum

This same cab also works on my o2XDA Atom Life.

Hope I have been of help.

BTW take your time finding the 815 cersion of map that works on this version of TTN7. Not all 815 version maps will work.

Take Care

PS Password for any file: elrincondedey

I found the TomTom 7 (7910.9185) PDA thread you were saying and I will just go straight to the 1st Post to download and hope it works.

By the way, can this TT7 version install to SD or must be into main memory? Any good link for North America v815 map or just Canada v815 map? I read that this version of TT7 can even read old v675 map too, do you have any idea whether needs modifications to the pna or it will just read automatically ?

sjdxda

19th November 2008, 14:50

I found the TomTom 7 (7910.9185) PDA thread you were saying and I will just go straight to the 1st Post to download and hope it works.

By the way, can this TT7 version install to SD or must be into main memory? Any good link for North America v815 map or just Canada v815 map? I read that this version of TT7 can even read old v675 map too, do you have any idea whether needs modifications to the pna or it will just read automatically ?

Read through the post from last backwards. There is a lot of discussion on which versions of the maps work and don't work. ?PNA? or PDA choose the right version of TTN to download. Use keygen version 8 to activate with 7910 9185.

Regards

Tex88

19th November 2008, 15:57

May I know can TomTom 7 be use on WM2003SE ? My existing V6.75 map is too old already but newer v7 or 8 maps won't work on my TomTom v6.203.

I installed the .28 pack on a couple of Dell Axim x30 with 2003SE without a problem. Works just fine.

SiRiOS

4th December 2008, 14:28

!!!NEW version TT Asperin v0.2 + Meta [11.12.2008]
EN: http://rapidshare.com/files/172352137/TT_asperin_v0.2_EN.rar
LV: http://rapidshare.com/files/172352139/TT_asperin_v0.2_LV.rar

!!!NEW version TT Asperin v0.3(a) no meta file need [17.12.2008](work with limited map, if your map not pached please send your *.PNA file to tomtomone@inbox.lv)

EN: http://rapidshare.com/files/172307588/TT_asperin_v0.3_no_meta_file_need_NEW_Update.rar
EN: http://rapidshare.com/files/174469864/TT_asperin_v0.3a_EN_no_meta_file_need_NEW.rar

Meta file [11.12.2008]
http://rapidshare.com/files/172307589/Meta.txtt

AND

NEED YOUR HELP

i want create a TTasperin soft without meta.txt file, but need your help
please send e-mail (tomtomone@inbox.lv) with *.pna files (map version 7.20, 7.25, 7.30, 8.05, 8.10, 8.15)

TNX everybody

sorry for my English

haani

12th December 2008, 00:12

I have an RAC 215E

deleted the Route66 software and everything else from the SD card, and installed TT7

the TT software works fine, but its just refusing to find the maps no matter what i do, im now using repack 3 and still no use in finding the maps.

the maps are the uk maps and are in the root folder of the SD card where i also have tomtom installed.

as far as i can tell everything is fine and should be working, but its just a no go, also wont let me download a free map so im stuck with tomtom and no maps which is about as useful as a chocolate teapot in a hot bath!

So any clues as to what it could be would be great.

I've been working on getting this working now for 2 days and im going slightly mad

i have RAC 200 could you tell me step by step how did u install tomtom I have been trying for ages and haven't had any luck!!!