TOMTOM NAVIGATOR 7 ON A Pocket PC ? [Archive]

Michal_PL

19th May 2008, 00:19

Because they are so f.... bored with the piracy around the software:LoL:
a read somewhere on the net

Yes, that can be the reason. They do know about piracy with the maps for Go series, but then they have the cash for the device plus some people do pay for the updates. Maybe they'll be using the new policy for PDA and sell TT7 only preinstalled on certain devices, thus they'll get some cash from companies like HTC etc.

Nevertheless, I think there wouldn't be so much piracy if the update of the maps policy was fairer. Look at Navigon. You buy the device and you've got 2 years of free updates (quarterly - making it 8 map upgrades for free). And if it pays for them, TT wouldn't be much poorer introducing at least 6 months or a year of free updates. I'm convinced that quite a few people would pay for another upgrade knowing they have a year of peace, not 30 days.

aspireskala

20th June 2008, 16:23

Big thank's for one of our friend :urtheman:
The TT Navigator 7, for Windows Mobile 5,6
After installation You can download one map for free

http://i29.tinypic.com/14ils8w.jpghttp://i31.tinypic.com/214qv11.jpg http://i29.tinypic.com/s1ryms.jpg

http://rapidshare.com/files/123745032/ttn7.cab

With best regards
Aspireskala

furrysings

20th June 2008, 16:58

The remaining problem being how to read series 7 maps. Sure the solution will pop up soon.

PS aspireskala, edit & rub out your tt serial code in your image

rskiki

20th June 2008, 17:47

Unfortunately it's not compatable with Palm Treo 750 Windows Mobile 6 any ideas on a compatable version for this device ?

kingsfan

20th June 2008, 18:46

indeed... if people adjust the device lock first then a lot more people can test or adjust the software for using the right maps...

My HTC s710 (VOX) is not supported also...

in a file in the cabinet are the following machine id's for devices that should work...

IPAQHW65
IPAQHW67
IPAQHW69
IPAQRX57
IPAQRX59
IPAQRX42
IPAQRX45
ARTE10000
HTC-ARTEMIS
TRIN100
HTC-TRINITY
ATHE100
HTC-ATHENA
KAIS10000
HTC-KAISER
POLA10000
HTC-POLARIS
SEDN10000
HTC-NIKI
HTC-SEDNA
PHAR10000
HTC-PHAROS
OMNI10000
HTC-OMNI
WING20000
HTC-WINGS
DIAM10000
HTC-DIAMOND
RAPH10000
HTC-RAPHAEL
PLAT10000
HTC-PLATINUM
IPAQH634
IPAQHW7
MOTOQ
GIZMONDO
MIO DIGIWALKER
AMOI ELECTRONIC CO.,LTD.

digitalextre

20th June 2008, 19:48

I am trying to use the 720.1712 North America Maps with this and haven't been able to figure our how to activate that maps, TomTom is reading those maps but I says "Sorry this is not the correct activation code for the product "North_America_2GB"

I think because the tt7 was installed on a difference device (Diamond) it probably has an activation file associated to a different map that I have to delete somehow so that when I try to select the map, it should ask me to enter activate code

I also need a software that can generate activation code for the 715 maps, I tried the TT Activator but it needs the midi file which I didn't find in the maps.

Please help if you can.

superduper

20th June 2008, 20:28

use the patch and key generator , used for Nacore 7.x or for 8.02..
works fine.

furrysings

20th June 2008, 20:41

great news, well done

superduper

20th June 2008, 21:02

yeah, that was no brainer ;)

at the moment it doesnt run on non-HTC PDA phones. I need to figure that out first.

Michal_PL

20th June 2008, 21:16

The only small disappointment is the fact that in bigger cities in maps 7.15 and newer you've got those 3D countours on PNAs and here there's nothing. Plus has someone devised where to copy zip codes because now they don't work. TT doesn't see them regardless of where I copy them.

geezer78

20th June 2008, 21:34

use the patch and key generator , used for Nacore 7.x or for 8.02..
works fine.

please explain: The key generator i understand, but what patch are you talking about? the one that patches ttsystem? There is no ttsystem with navigator for PPC as far as i see...

superduper

20th June 2008, 21:41

@geezer78

cmd>

Patcher.exe "TomTom Navigator.exe"

TTuser

20th June 2008, 21:48

or simpler if you have my "easyusetool" rename it to .dll drop it into insert_meta_from_Map_here and start one from the runme´s and it go also patched

superduper

20th June 2008, 21:59

some issues there. just found HTC phone to test:

the File TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate or one of it's compoment cannot be found....

I will have to take a closer look at this one..

rp1790

20th June 2008, 22:03

@geezer78

cmd>

Patcher.exe "TomTom Navigator.exe"

THAT worked like a treat, thanks!!

TTuser

20th June 2008, 22:04

same says "digitalextre" to the patched .cab and single t t navi.exe from me, i mean without this ceritblabla should it work:confused:

http://www.ipmart-forum.com/showthread.php?t=199811&page=202

digitalextre

20th June 2008, 22:15

i am trying to get past the damn thing complaining about the app not digitally signed.....

Michal_PL

20th June 2008, 22:15

when I start the patched exe file it says that it's not from a trusted source or it's not signed... what can I do?

geezer78

20th June 2008, 22:16

digitalextre

20th June 2008, 22:21

when I start the patched exe file it says that it's not from a trusted source or it's not signed... what can I do?

I am in the same boat, I installed the posted tt7.cab that someone extracted from HTC Diamond, then tried to replace the exe but it won't run, and I can't install the tt7p.cab either, the device complains that it's not digitally signed and I can't extract the cab contents, it seems like its corrupt, I am able to exact all other cab contents without a problem. I have the 720.1712 maps installed with dct file created using the keygan, just need to patch the app someone....I hope someone will figure it out soon

elroy944

20th June 2008, 22:42

i hope so too, don't want to install tt navigator 6 again :p

Jajajoh

20th June 2008, 22:49

I have a mio a701 and can't get it work on my device. try with a wm5 and wm6 rom. Is there already a trick so it will be posible to use tomtom7 on my mio?

digitalextre

20th June 2008, 23:06

THAT worked like a treat, thanks!!

Can you exmplain what exactly you did, I have the easytool, the patcher.

This is what I did based on the instructions you followed, but didn't work for me, let me know if I missed anything.

1) Downloaded 715.17.12 maps
2) Used meta file from the maps in easytool and got the dct file
3) put the meta + dct on the HTC Tytn II (the device I am using, with 3.29.707 shipped WWE ROM)
4) Downloaded tt7.cab and installed it
5) Downloaded free New York City Map (which works fine)
6) The device also now sees the North America 715.17.12 map but when I try to select it, it says "Activation Code incorrect....blah blah blah" and gives me the Cancel Button

Now from this point, I tried installing the tt7p.cab (this is a no go, the device complains about the app not being digitally signed most probably because it's been modified and not signed by a trusted certificate)

I also tried using the C:\>Patcher.exe "TomTom Navigator.exe" trick, which patched the file, but it modified the file so when I run the Navigator now, it says "its not signed.....blah blah blah"....so I am stuck now...

somehow the patched file needs to be signed I am assuming and I don't know how to do it.

ghost2

20th June 2008, 23:06

digitalextre

20th June 2008, 23:16

TTuser,
could you please re-upload the files patching TT system and enabling TT maps to be seen on PDA ( I guess those files are called something like Patcher.exe and keygen.exe).
:thanks:

Reason: The uploader has removed this file from the server.

Here you go:

(file credit goes to the original posters, I am just posting links)

TomTom7 (cab) extracted from HTC Diamond
http://rapidshare.com/files/123806420/ttn7.cab

TomTom7 (cab) patched (by TTUser I believe)
http://rapidshare.com/files/123863787/ttn7p.cab

TomTom Navigator (exe) Patched (by TTUser I believe)
http://rapidshare.com/files/123863612/TomTom_Navigator_patched.rar

TomTom7 Patcher and Easytool (includes North America 715.1712 Meta deta)
http://rapidshare.com/files/123863419/Keygen_TomTom_V7.10.rar

geezer78

20th June 2008, 23:25

Does anyone know what the file " MapUserPatch.dat" does that is present in the free downloadable map folder after opening?

Could that be our way into hacking these maps?

just my 2 cents ;-)

edit: nevermind.. i've found it has to do with mapshare...

ghost2

20th June 2008, 23:55

:D Thanks a lot digitalextre ! :urtheman: Ur faster than TT user.
:ilove: :ilove: :ilove:

digitalextre

21st June 2008, 00:01

I have got it to work, I am posting instructions now :) hang in

digitalextre

21st June 2008, 00:10

Good news, I have got this to work...maybe someone can simplify this process :)

Here is what I did:
1) Download your choice of maps (version 7XX.XXXX)
2) Use the Easytool to create a dct file, instructions are included with the tool, no need to use the patcher since TTUser has already provided the patched file, or you can patch it if you like (C:\>Patcher.exe "TomTom Navigator.exe") and you'll have your own patched file, here is the easytool
http://rapidshare.com/files/123863419/Keygen_TomTom_V7.10.rar
3) Copy Map data including the dct file to your Storage Card (I put that stuff in \Storage Card\My Documents\North_America_v715_2GB)
4) Now download and install TT7 located here:
http://rapidshare.com/files/123806420/ttn7.cab
5) Download the patched TT Navigator.exe file that TTUser Provided:
http://rapidshare.com/files/123863612/TomTom_Navigator_patched.rar
6) Go here: http://www.codeproject.com/KB/mobile/signcode.aspx
and follow instructions on how a) Create your own certificate, b) install certificate on your device 3) Sign the patched TomTom Navigator.exe file that you just downloaded
7) Once the TomTom Navigator.exe file is signed, replace the TomTom Navigator.exe on your device with the signed exe and launch the application, it will not complain about the app not being signed and will recognize the North America Map and let you use it.

Now I just need someone to simplify this process, otherwise I will have to install the signed certificate everytime I install the TomTom7 on my PDA :)

let me know if you have any questions, I have tested this to be working for me, should work for everyone else too.

Most credit goes to TTUser

TTuser

21st June 2008, 00:16

it works :confused: i remove files because i think it works not :pmpl:

possible can you also try this

http://rapidshare.com/files/123874130/TomTom_Navigator.rar

elroy944

21st June 2008, 00:23

in wich map do you copy the tomtom navigator.exe file? i don't see any other .exe file in map \tomtom, only tttoday.dll and in \Program Files\Navigator i dont see any exe

digitalextre

21st June 2008, 00:28

in wich map do you copy the tomtom navigator.exe file? i don't see any other .exe file in map \tomtom, only tttoday.dll and in \Program Files\Navigator i dont see any exe

look in the main memory under "\Intern geheugen\Navigator"

Michal_PL

21st June 2008, 00:28

it works :confused: i remove files because i think it works not :pmpl:

possible can you also try this

http://rapidshare.com/files/123874130/TomTom_Navigator.rar

that works. you're great man. respect :)

digitalextre

21st June 2008, 00:29

it works :confused: i remove files because i think it works not :pmpl:

possible can you also try this

http://rapidshare.com/files/123874130/TomTom_Navigator.rar

TTUSer, this exe works too..........does that mean no need to sign the patched exe?

I replaced the signed exe with this and it didn't complain about not being signed and the application started.

If this works, then this is all we needed, my process was complicated going through signing the exe.....this is what we needed :)

Thanks.

kingsfan

21st June 2008, 00:49

is the device limitation already gone?? last versions cannot be installed on a HTC VOX

great work for the rest untill now....

elroy944

21st June 2008, 00:49

TTUSer, this exe works too..........does that mean no need to sign the patched exe?

I replaced the signed exe with this and it didn't complain about not being signed and the application started.

If this works, then this is all we needed, my process was complicated going through signing the exe.....this is what we needed :)

Thanks.

Yes it the file from ttuser works great. TTuser :urtheman:
and digitalextre you too:weedman::ilove::exactly:

Michal_PL

21st June 2008, 00:51

I think all we need now is:
1. Download ttn7.cab and install it on the device
2. Download the patched TomTom Navigator.exe file and copy it to device/intern geheugen/navigator folder overwriting the old one
3. Download the map we need and patch the .dct file using our device code in keygen.

I can confirm that it works a treat with Western and Central Europe 7.20 plus the map shows now those nice 3D contours in the centers of large cities :)

digitalextre

21st June 2008, 00:56

TTuser

21st June 2008, 01:13

The original .cab has a CPU Type Install Limit, i remove it and glue also the patched navi.exe inside, i hope it works still.

http://rapidshare.com/files/123883393/ttn7p.cab

OKN

21st June 2008, 01:16

ttn7.cab & Glofiish X800 = Your device is not compatible with this version of TomTom NAVIGATOR :(

ttn7p.cab & Glofiish X800 = Your device is not compatible with this version of TomTom NAVIGATOR :(

Ratus

21st June 2008, 01:21

ttn7p.cab & Eten M600 = device not recognized

digitalextre

21st June 2008, 01:23

The original .cab has a CPU Type Install Limit, i remove it and glue also the patched navi.exe inside, i hope it works still.

http://rapidshare.com/files/123883393/ttn7p.cab

you are a genius....it works :)

No need to replace the exe with patched now, install this cab and patch the maps using easytool to create the . dct and you are done.

I am using a Tytn II to test (QVGA)

thinkabout

21st June 2008, 01:37

furrysings

21st June 2008, 01:39

with the CPU Type Install Limit removed, I lived in hope of installing ttn7 on a PDA Asus 636N with WM5. The cab launched, then I got non-compatiblity message. The CPU Type Install Limit removed is only for htc smartphones, or for all smartphones but not pocket pc's ? Great work so far all you guys.

TommTomm

21st June 2008, 01:48

The original .cab has a CPU Type Install Limit, i remove it and glue also the patched navi.exe inside, i hope it works still.

http://rapidshare.com/files/123883393/ttn7p.cab

Function like a charm on my HTC P3300 WM6 :egdance:

France_Alps 715.1729 and DE_AT_CH_and _Eastern_Europe 720.1802

Thanks a lot for this effort. :curtsy:

Greets TommTomm.

furrysings

21st June 2008, 01:54

Tommtomm, if you had tt6 before, did you uninstall first, or overwrite direct with tt7 ? Cheers

rv07607

21st June 2008, 01:58

police21063

21st June 2008, 01:59

ttn7.cab & MIO A701= Your device is not compatible with this version of TomTom NAVIGATOR

TTuser

21st June 2008, 02:02

The cpu install limit prevent you only for install on a device with not matching cpu, set to all has absolute nothing to do with the Navigator itself.

see in the funny ttnavigator.bif for ID

know someone a good fast running full working with available maps navisoft for a Acer n35 with WM2003:confused: long wait for TT and now works it not:angry::angry:

TommTomm

21st June 2008, 02:07

Tommtomm, if you had tt6 before, did you uninstall first, or overwrite direct with tt7 ? Cheers

I replaced all one by one. I extract the .cab and renamed with the right name. See also the "setup.xml".

Where exactly do you get your DeviceID

ttnavigator.bif

Greets TommTomm.

elroy944

21st June 2008, 02:07

Where exactly do you get your DeviceID for use with the Easyusetool? Some googling revealed its supposed to show up on the map activation screen on the PPC, but it is not there (this is also for tt6, but I couldnt find any tt7 information)? Thanks

Well i guess you don't have any maps, you can download a short citymap for free on the device (touch the button: certificate or coupon or something) after that touch the rightbottom and touch the aplication version (v7.blabla) then you will see your device code

Michal_PL

21st June 2008, 02:10

Tommtomm, if you had tt6 before, did you uninstall first, or overwrite direct with tt7 ? Cheers

In my case when I started installing tt7 it said that it first has to remove the previous version and when I confirmed it uninstalled tt6 automatically and installed tt7. however it left the old tt6 folder with some settings files which I removed.

alanplum

21st June 2008, 02:15

Darn,

I'm really struggling with this.

I downloaded the Western_And_Central_Europe_720_1803 or something maps around 1.83Gb, generated my blah.meta.dct using my device code and installed ttn7p.cab but I still get the old activation failed error message.

D'you think I've got duff maps?

deshwasi

21st June 2008, 02:21

i take it this is only for pocketpc (not smartphones without touchscreen). in that case first thing i will be doing is installing WM6.1 rom on my SDA... pls confirm. you guys rock. just curious, where did this thing, TT7, pop-out from? did this just come out unannounced or i have been on a diff planet?

thinkabout

21st June 2008, 02:31

i got htc 3600 and htc cruise working.

htc 3300 i got problems it the certificated someone with the same problem ?

TommTomm

21st June 2008, 02:56

htc 3300 i got problems it the certificated someone with the same problem ?

Have you rename the tomtom navigator for example to tomtom navigator 7 ?

This one is a fould, I have the same befor. Dont rename the ttn.exe

Greets TommTomm.

thinkabout

21st June 2008, 03:07

The original .cab has a CPU Type Install Limit, i remove it and glue also the patched navi.exe inside, i hope it works still.

http://rapidshare.com/files/123883393/ttn7p.cab

:thanks:

Works for my 3300

monello

21st June 2008, 07:21

The original .cab has a CPU Type Install Limit, i remove it and glue also the patched navi.exe inside, i hope it works still.

http://rapidshare.com/files/123883393/ttn7p.cab

Good job but don't work on mio a 701 and qtek 9000 pocket device....thx so much

imabored

21st June 2008, 08:12

geezer78

21st June 2008, 11:03

I can confirm this working also!

You guys rock!!

thanks a lot ;-)

furrysings

21st June 2008, 12:41

Installed tt7 on htc p3300 with free map, works great, thanks again to ttuser. Will try to install series 7 map, but notice series 6 maps on sd card are no longer visible. This is a pity, since some series 6 maps are better or give access to countries not available in 7 series (Greece, Turkey, etc). Is this me who's messed something up ? Cheers

cnud

21st June 2008, 13:18

Works sweet on my XDA Orbit running WM6. Thanks

smsc

21st June 2008, 13:54

TommTomm

21st June 2008, 14:16

I miss the menu-button "Wireless data activate" to activate Weather and Jam message to connect with GPRS or UMTS or Bluetooth.

Greets TommTomm.

brooklyn

21st June 2008, 15:02

Ok!! so far so good i have this loaded & working on an old COMPAQ IPAQ H3970 now just need to activate the map.:hehe:

http://rapidshare.com/files/123897111/tomtom7.rar.html

[TomTom NAVIGATOR]
DeviceName=COMPAQ IPAQ H3970
DeviceVersionHW=Windows CE 4.20
DeviceSerialNumber=00xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx
DeviceUniqueID=xxxxx xxxxx
ApplicationVersion=7450
ApplicationBuildNumber=9028

furrysings

21st June 2008, 15:29

for smsc, you're a bloody genius, I confirm home updates work with your "discovery". What's more, moving to program folder allows startup with the dedicated hard button on the phone....

for tommtomm, tt7 connects automatically to internet to pick up weather, etc.. on my htc p3300

TTuser

21st June 2008, 15:33

I change here the Installpath to Standardprogram Folder.

http://rapidshare.com/files/123993076/ttn7p-newPath.rar

smsc

21st June 2008, 16:32

I change here the Installpath to Standardprogram Folder.

http://rapidshare.com/files/123993076/ttn7p-newPath.rar

Thanks TTUser, I'm trying too without success.... I'm using WinCE CAB manager but no lucky...

Plese can you explain me how do you change .cab file?? Or whitch program do you use??

Thanks!

Michal_PL

21st June 2008, 16:49

Any1 know how to compress again all files to tt7n.cab archive??
Is there any particular procedure??

You just need to use an archiver which can both unpack and compress .cab files, with winrar you can only unpack files.

S_Pimpernel

21st June 2008, 16:58

I am trying to install this on a HTC 620. I have copied the TTn7p.cab file to the pocket pc and have run it from the file explorer using the ppc. It gets so far the I get the message that 'this device is not compatiable withthis version of TomTom Navigator.
Any help appreciated please.

TTMax

21st June 2008, 18:03

First of all, thanks to all making this possible. TT7 working after only a few days .... very impressive.

It's working for me on a Glofiish x800 wm6.1 French . I have successfully activated and tried these maps :
. Brazil - v710.1628
. Australia - v720.1838
. DE_AT_CH - v720.1803
. Eastern_Europe - v720.1803
. France - v720.1802
. Iberia - v720.1803
. Italia - v720.1802
. Singapore - v720.1820
. Scandinavia - v720.1802
. United_Kingdom_and_Republic_of_Ireland - V720.1802
. USA_and_Canada - V720.1802
. Western_Europe - v720.1803
. Western_and_Central_Europe - v720.1803

My question is how to use Mapshare. Somebody here says it works. But how do you do that ?
Are you using Tomtom Home v1.5.0.6 or v2.3.1.92 or another one ?

TTHome v1 connect to my pda but doesn't know about mapshare.
TTHome v2 doesn't find my pda.

What's the solution ?

Thanks for helping (again) ...

:urtheman:

Nirak

21st June 2008, 18:26

furrysings

21st June 2008, 18:28

I use tthome 2.3.1.92, and it finds tomtom 7 on htc automatically. Could it be that tthome recognises the kind of phone i.e. htc, with whom they have a deal ?

smsc

21st June 2008, 18:38

You just need to use an archiver which can both unpack and compress .cab files, with winrar you can only unpack files.

No it doent's work... I tried with WinAce, but resulted .cab cant be install on pda....

TTuser

21st June 2008, 18:52

WinCE CAB Manager :exactly:

TTMax

21st June 2008, 19:09

Same on HTC Wizard (former Orange SPV M3000) running on WM 6.1 Pro.

Didn't find a solution yet

Try the cab included in this version from forum.ppcwrez.org , it worked for me , after being unsuccessfull and having "incompatible" message using the version I found here.

http://rapidshare.com/files/123946782/TT7.rar

Password: ppcwarez.org

:ilove:

gamarala

21st June 2008, 19:14

WinCE CAB Manager :exactly:

TTUSER much thanks and respect for all your hard work. Working like a charm in my Kaiser.

I was wondering whether this version supports street names or is it only on the linux version?

brooklyn

21st June 2008, 19:32

uzin22

21st June 2008, 20:03

is possible start it on win ce 4.2??? on this time any file tt7 is not working, (this version of navigator is not compatible with this device)

topbanana4

21st June 2008, 20:16

sorry if i'm being thick ( had too many beers last night lol ) how do you get the device id number so that you can do the keygen ????
thanks for all your help

superduper

21st June 2008, 20:33

Aeveryone

I suggest to stick with TTUser version on hack here for anyone with genuine HTC handset. the ppwarez version is ok, but have issues with BT stack. do not atempt to install unless you cannot get around using TTUser version. once againg, TTUser version is a clean hack, while PPWarez versio is something that I would not aprove. Just a word of caution to the ones that have not decided wich one is right to go with.'

once again: there are some serious issues in the PPwarez version, do not install this version unless you are out of luck with TTUser clean hack.

credits to TTUser, everyone should praise this person for all his enormous efforts into getting this one right for you, guys.
Peace, Freedom and love

digitalextre

21st June 2008, 20:52

For those who want the app for HTC devices, here is a link containing both TT7 and the map patchers + instructions based on TTUser files. It works on Tytn II which I have tested on.

http://rapidshare.com/files/123883031/TomTom7_WM6.rar

I am in full agreement with Superduper, this is a very clean version.

basflt

21st June 2008, 21:23

sorry if i'm being thick ( had too many beers last night lol ) how do you get the device id number so that you can do the keygen ????
thanks for all your help

tap in the right section of the sytembar
tap on the squere w versionnumer

S_Pimpernel

21st June 2008, 21:32

Thanks everyone for your help,but still cannot get this to install on a HTC 620. Has anyone else managed to get this to install on this device?

hb88xx

21st June 2008, 22:39

Try the cab included in this version from forum.ppcwrez.org , it worked for me , after being unsuccessfull and having "incompatible" message using the version I found here.

http://rapidshare.com/files/123946782/TT7.rar

Password: ppcwarez.org

:ilove:

did not work on palm 750 because of not enough memory (25Mb free)

TommTomm

21st June 2008, 23:12

for tommtomm, tt7 connects automatically to internet to pick up weather, etc.. on my htc p3300

Thanks, but my P3300 dont connect automatically to internet.

Witch System use you on P3300? WM5 or WM6?

Have you in the menu a button with de account to write?

Greets TommTomm.

DB7000

21st June 2008, 23:18

TT7 works fine on HTC Wizard (Qtek 9100) using Win 6.1 with map Western_and_Central_Europe v720.1803

uzin22

21st June 2008, 23:35

where in registry can i change source maps from My documents to for exampel SD card

imabored

21st June 2008, 23:40

MasamiH

21st June 2008, 23:47

or simpler if you have my "easyusetool" rename it to .dll drop it into insert_meta_from_Map_here and start one from the runme´s and it go also patched

Can you explain... How patch maps??? I can't see my device id...

TommTomm

22nd June 2008, 00:13

I can't see my device id...

ActiveSync-Explorer -> ttnavigator.bif (open with editor for read) -> write in "DeviceID".

Greets TommTomm.

furrysings

22nd June 2008, 00:44

for tommtomm, I have a phone subscription for access to internet already programmed, independant of tt7. P3300 is with wm6. When I hit options under tt plus services, the connection is made automatically.

ttesting123t

22nd June 2008, 00:46

I can't get it to work with the HTC Mogul/Titan. I get the device not supported msg, does anyone know how to bypass that? Thanks.

nmab

22nd June 2008, 00:52

Installation and map activation works fine on an HP-HW6915 only I do not hear voices it seems that this installation kills the volume control (of the HP itselfs).
even when I ajust the volume on max its dropped imediately to zero??

Some has seen this ever before?

MasamiH

22nd June 2008, 01:08

Ok guys, but I can't find voice... In which folder of pda I've to install that? Thank you

furrysings

22nd June 2008, 01:24

for nmab, it's the btcoreif.dll in windows, rename to btcoreif.old, then do a soft reset. cheers

MasamiH

22nd June 2008, 01:39

Guys, I can't find voices...

DB7000

22nd June 2008, 02:04

Guys, I can't find voices...

Just make a folder called voices in the root of your memorycard and put the voices in that folder.

uzin22

22nd June 2008, 02:56

know anyone about problem with the error not enouth memory during start ttnav7 on win ce 4.2?

nmab

22nd June 2008, 14:32

for nmab, it's the btcoreif.dll in windows, rename to btcoreif.old, then do a soft reset. cheers

Thanks man all works fine now, all maps where a meta data are known for work!!
:urtheman:

DJBeatMaster

22nd June 2008, 14:34

Works all on my old XDA Mini. THANX !!!

But... does any one got MapShare to work ? I tried old TomTom Home 1.x and the new 2.x but TomTom doesn'r recognize my Device. Then I tried to access my SD Card directly with a SD-CardReader. TomTom 1.x recognized my card but TomTom 1.x doesn't support MapShare.
TomTom 2.x does not work with this method, it always wait to the device to be connected :(

Any Ideas ?

renmar

22nd June 2008, 15:04

I have just replaced exe and data.chk and it works like a charm on my Asus A636N :)
(rapack2 of coures :)
great job

MeisterLampe

22nd June 2008, 15:28

Hello,
I have a xda Neo, an then i will install the TTN7P, i become an error Message:

Your device is not compatible with this version of TT Navigator

Any solutions ?

Dutchboy

22nd June 2008, 15:54

on my SD Card I have the folder navigator.
Here I have the Tomtom navigator.exe and data.chk and other files.
Inside this folder I have the folder voices.
Inside this folder I have the data*.chk, data*.bmp and data*.vif files.
e.g. \sd card\navigator\voices\data100.chk
Check if the .vif file (open it with notepad) contains the right entry for the corresponding voice.

Homer1

22nd June 2008, 15:58

Repack2 is now available thaxxx to rab ppcwarez, This should fix the font problem, the device detection (that prevented it running on most devices) now thinks it's running on qvga rather than vga. Also, the colour scheme has improved from that nasty high contrast black one. This patch perhaps isn't ideal (for example, if you did want to run it on a vga device (if so use repack1)). A better patch would be welcomed.

http://rapidshare.com/files/124030856/tomtom7a.rar.html

thaxxx to rab ppcwarez:egdance:this installed in WM6.1 custom Atom Exec rom CE & build 19588, however, I cannot find an Aus map or NZ map that works, 675 is the latest Aus map I assume? Tomtom thread is all over the place someone please point me to a map that will work with TT7, thanks in advance.

basflt

22nd June 2008, 16:08

my device apears too old for v7
any idea where to look v6? :thanks:

superduper

22nd June 2008, 16:39

@Homer1

latest available Australian map is v.7.20.1838

search this forum for the download link.

falafel

22nd June 2008, 16:44

Try the cab included in this version from forum.ppcwrez.org , it worked for me , after being unsuccessfull and having "incompatible" message using the version I found here.

http://rapidshare.com/files/123946782/TT7.rar

Password: ppcwarez.org

:ilove:

This version works on my HP RW6815, map Italia 7.20

rskiki

22nd June 2008, 17:00

Homer1

22nd June 2008, 17:39

@Homer1

latest available Australian map is v.7.20.1838

search this forum for the download link.
cool, thanks man, must spread some around before repute again.

HOPPSUISSE

22nd June 2008, 18:01

know anyone about problem with the error not enouth memory during start ttnav7 on win ce 4.2?

Yes me too I have this message:
"Unable to start.
Not enough memory is aviable"

but i don't now why, because i have 74.3 mo free to 132 mo in memory on my Tynty II

elroy944

22nd June 2008, 18:07

Yes me too I have this message:
"Unable to start.
Not enough memory is aviable"

but i don't now why, because i have 74.3 mo free to 132 mo in memory on my Tynty II

where did you put the navigator.exe file? put it into: "\Intern geheugen\Navigator" or "\Internal memory\Navigator"

brooklyn

22nd June 2008, 18:10

First off thanks to the hard work and dedication to all who made this possible 2 thumbs up. It installed on my Palm Treo 750 no problem but the letters are oversized and all are not fitting on the screen is there anyway to get this to configure to a 240 x240 screen ? Any help with be appreaciated. Thanks againTry this version it worked ok for me & got rid of the large fonts.

http://www.ipmart-forum.com/showpost.php?p=2104638&postcount=93

Here you have repack_2 with art/car icons & helpme.:hehe:

http://www.badongo.com/file/10008977

Nirak

22nd June 2008, 19:27

Repack2 is now available thaxxx to rab ppcwarez, This should fix the font problem, the device detection (that prevented it running on most devices) now thinks it's running on qvga rather than vga. Also, the colour scheme has improved from that nasty high contrast black one. This patch perhaps isn't ideal (for example, if you did want to run it on a vga device (if so use repack1)). A better patch would be welcomed.

http://rapidshare.com/files/124030856/tomtom7a.rar.html

thaxxx to rab ppcwarez:egdance:

Tried almost all, but this one did the trick on my Qtek 9100!

Thanks all for helping me out :thanks:

furrysings

22nd June 2008, 20:39

Repack2 works fine on Asus 636n, too. In common with ttuser's version for htc p3300, as reported earlier, no series 6 maps are "seen". Bit of a pity, but who am I to complain ? I just apply and admire :good2:

Anybody else notice that the screen seems to refresh at a slightly lower rate than on a dedicated tomtom ? :hahaha2:

pisspodpete

22nd June 2008, 20:47

Just installed V7 on Tilt, all well except when I try to get traffic or weather it says bluetooth not connected. V6 worked perfect with traffic and weather.
Any suggestions??

THX

mickielli15

22nd June 2008, 21:03

ok guys and ladies :-) :wave:

VOICES, SCHEMES, COCPIT-CARS, SPEEDCAMS, RASTER in one pack :-) I just collected "the best of" to TTN7. NOT soft, only "tuning pack" for installed :-)

I made my own color schemes, some of them are from other people. Voices are from all main languages. (DANSK, DEUTSCH, ENGLISH, ESPANOL, FRANCAIS, ITALIANO, NETHERLANDS, NORSK, SVENSKA, PORTUGESE, SUOMI, CATALAN, CZECH - and - GEORGE BUSH, YODA, DR.EVIL, CHIP AND DALE, ROBOT, OZZY OSBOURNE BLEEPED, OZZY OSBOURNE SWEARED).
There are MANY new car pictures to be able to change car in cocpit-mode. :-)

SO how to: folders "voices", "schemes" and "raster" copy to ROOT of card. NOT to another folder, just to card!

folder "art" copy NOT TO CARD, but to memory of your device to PROGRAM FILES/NAVIGATOR. It will look like this: NAVIGATOR/ART/CARS. In this folder are car images...

copy ALL FILES from folder "radar EXCEPT SWIZZ" (NOT THAT FOLDER, BUT ALL FILES FROM IT!!!) to folder of your map, than set warning in TT.

enjoy. :partyman::partyman::partyman::partyman:

http://rapidshare.com/files/124216861/finally_what_was_needed.rar

password: ttniswhatweneeded

DJBeatMaster

22nd June 2008, 22:01

My question is how to use Mapshare. Somebody here says it works. But how do you do that ?
Are you using Tomtom Home v1.5.0.6 or v2.3.1.92 or another one ?

TTHome v1 connect to my pda but doesn't know about mapshare.
TTHome v2 doesn't find my pda.

What's the solution ?

Thanks for helping (again) ...

:urtheman:

Yeah ! Exactly this is my problem, too !
TTHome v1 connects, but no mapshare function implemented
TTHome v2 doesn't find my PDA.

Anyone can help ?

HOPPSUISSE

22nd June 2008, 22:05

where did you put the navigator.exe file? put it into: "\Intern geheugen\Navigator" or "\Internal memory\Navigator"

I put into :
Ordinateur\TyTN II de Benjamin\\\Program Files\Navigator...

thank's for help

DJBeatMaster

22nd June 2008, 22:06

MapShare works too!!!!! :egdance:

Just move "Navigator" directory from "\Intern geheugen" to "\Programs" (remember to modify also the start menu link and activate mapshare on TT7 settings menu).

Then start TTHome and download MapShare update!!!!!!

HowEver, TT7 install in defaul dir "\Intern geheugen", to change it we need to modify "_setup.xml" file on tt7n.cab archive.
So, just uncompress tt7n.cab archive and edit "_setup.xml" file.

TT7 is installed in programs. I've used the "tt7np.cab" but which Version of TomTom Home do you use ?

TT Home v1 hasn't implemented the MapShare Function and
TT Home v2 doesn't find my PDA.

I tried to access directly my SD-Card via SD-Card Reader, but TT Home v2 doesn't find anything !

Maybe it can help if you post here the files that you have on your SD-Card.

BTW: MapShare in TT-Application is activated !

Please help us to use MapShare !

TTuser

22nd June 2008, 22:21

Home 1.6 can also Mapshare

DJBeatMaster

22nd June 2008, 22:56

Home 1.6 can also Mapshare

where I can download TT Home 1.6 ? At tomtom's Webpage only 1.5 is available

furrysings

22nd June 2008, 23:38

1.6 is for Apple ?

DJBeatMaster

22nd June 2008, 23:42

OK, I just found TT Home 1.6 here on the forum (used search).

But...Mapshare doesn't work !

TT Home always says that no TomTom Content is on my PPC !

If I do a manual update search it always downloads the "telephone settings" (connect2internet files), but no mapshare files !

MapShare in TT is activated !

How do I get this f*** mapshare to work ? Any ideas ?

Can anyone post the content of his SD Card ? I think anything is missing on my SD Card.

imabored

23rd June 2008, 00:04

nismax

23rd June 2008, 00:16

Just installed V7 on Tilt, all well except when I try to get traffic or weather it says bluetooth not connected. V6 worked perfect with traffic and weather.
Any suggestions??

THX

man please help me! how did you get meta dct. file to work. iwe been trying for 5 days cant get it to work please write in steps how did you get it to work. i have tilt and ihave tryied two different maps for north america i cant pass meta thing. how many numbers to use from meta 10 which one first 10 or last 10 or whole number 7A553D7ADF487190D4CC25743B737F30. i have tilt and i am running vista. please please please help me this is driving me crazy.

imabored

23rd June 2008, 00:50

man please help me! how did you get meta dct. file to work. iwe been trying for 5 days cant get it to work please write in steps how did you get it to work. i have tilt and ihave tryied two different maps for north america i cant pass meta thing. how many numbers to use from meta 10 which one first 10 or last 10 or whole number 7A553D7ADF487190D4CC25743B737F30. i have tilt and i am running vista. please please please help me this is driving me crazy.

For those who want the app for HTC devices, here is a link containing both TT7 and the map patchers + instructions based on TTUser files. It works on Tytn II which I have tested on.

http://rapidshare.com/files/123883031/TomTom7_WM6.rar

I am in full agreement with Superduper, this is a very clean version.

download that file and follow those instructions. they are the easiest. i tried others instructions but didn't work for me but when i used digitalextre's i got it to work in one try. good luck.

ukmed1

23rd June 2008, 02:16

Hey guys first of all I wanna say this site is the best and your guys are amazing for posting so quick helping us all out.

I have installed TomTom_Navigator_7.450.9028_repack2.cab over my old Navigator 6 and got my map working on my MIO 168 DIGIWALKER by just using the easyusetool and nothing else.

it works great I'm using uk map v7.15.1689

Now I have some questions

1. Is 7.20 the latest supported map by TT7 ?

2. is there anyway to get 8.05 map working ( yes i know it would not have IQR or ALG) so far it does not acknowledge it's existence on my card.

3 Are there any UK maps that support the Text To Speech for road names ?

thanks in advance you guys rule!
http://www.ipmart-forum.com/images/smilies/ur.gif
:urtheman:

futaris

23rd June 2008, 04:53

3 Are there any UK maps that support the Text To Speech for road names ?

TTS needs the Loquendo voices (http://www.ipmart-forum.com/showthread.php?t=170022), and I don't think they're supported on WinCE / PDAs. Someone please correct me if I'm wrong, though.

rskiki

23rd June 2008, 06:52

Thanks guys the new TomTom 7 repack 2 cab file is working on my Palm Treo 750. Tomorrow morning I will test it out to see if it runs same or slower than version 6. Again 2 thumbs up to all those who made this happen.

Proph

23rd June 2008, 10:37

basflt

23rd June 2008, 10:44

furrysings

23rd June 2008, 12:07

Hi y'all. Progress report :

ttn7 by ttuser installed on htc p3300 : maps 7 series work fine, internet connection OK for weather etc., tthome mapshare updates OK... however series 6 maps remain invisible, screen image refreshes slooowly with 1 to 2 second lag on real position.

ttn7 repack2 on asus 636n : maps 7 series OK....however no internet connection through bluetooth (works OK with ttn6), no mapshare updates, and....series 6 maps remain invisible, screen image refreshes slooowly with 1 to 2 second lag on real position.

So all in all have gone back to ttn6, cheers

superduper

23rd June 2008, 12:27

maps 6.x are supported. you need 6.75 version of map at least.

Hi y'all. Progress report :

ttn7 by ttuser installed on htc p3300 : however series 6 maps remain invisible,
So all in all have gone back to ttn6, cheers

onering67

23rd June 2008, 13:37

This version works on my HP RW6815, map Italia 7.20

Hello falafel!

Excuse me, but you have installed TT7 on your old Navigator 6, or you have disinstalled it and installed TT7 like a new program?

Thanks in advance, bye!

superduper

23rd June 2008, 16:15

TomTom 7 PDA screen rotation utility

It is very handy to have option to run TT7 for PDA in landscape and portret mode.
Unfortunately, HTC made Landscape mode unavailable for HTC Touch Diamond phones.

I have attached very handy utility developed for launching TomTom 7 PDA in one of the following modes:

1. Portret
2. Landscape Right Handed
3. Landscape Left Handed

drop this utility in "Navigator" folder on your PDA (TomTom Navigator.exe should be located in the same folder).
launch utility in file explorer on your PDA. choose screen orientation.

utility will launch TomTom in choosen mode. Screen will be reverted back to normal orientation as soon as you are out of TT7.

also, just to make your life easier:

1. you can add this utility to Programs Tab in TouchFLo

or

2. edit link to TomTom in program files folder and point link to TT7 launcher instead of TomTom.

(c) Getorix // TSRh :wave:

P.S. TomTom should have this code included and launch this mode chooser at the program startup. would be excellent, guys!

rusigor

23rd June 2008, 18:42

maps 6.x are supported. you need 6.75 version of map at least.
Not with repack2.cab - waiting for today's evening. repack3 promised to see both 6.x & 7.x maps:wave:

rskiki

23rd June 2008, 18:53

Ok guys tested TomTom 7 repack2 with Palm Treo 750 with USA_and_Canada 720 1803 Maps and it's pretty stable had program running for 3 hours this morning and it's running smoothly only thing I notice is that the zoom feature isn't working. But over all I'm happy with it again a special Thanks for all those who made this happen.:thanks::thanks:

furrysings

23rd June 2008, 20:47

For superduper, thanks for thinking I'm a complete idiot. Now where would I get the idea of not having a series 6 map on the sd card, to come up with the statement that these maps remain invisible. Of course I have taken them off the sd card and hidden them in a chest buried 6 feet under, and my poor pda & phone are busy searching together, holding hands under the romantic moonlight.

See, I also can write cr*p

jack1976

23rd June 2008, 22:03

On my kaiser all ok!

brooklyn

23rd June 2008, 22:10

Repack_3 support for version 6/7 maps.

http://rapidshare.com/files/124496917/TT_Nav_7.450.9028_repack3.7z.html

Big Thanxxxx to rab_ppcwarez.

superduper

23rd June 2008, 22:39

stop smoking that sH1t, mate. Its gonna kill ya... :exactly: :hehe:

For superduper, thanks for thinking I'm a complete idiot. Now where would I get the idea of not having a series 6 map on the sd card, to come up with the statement that these maps remain invisible. Of course I have taken them off the sd card and hidden them in a chest buried 6 feet under, and my poor pda & phone are busy searching together, holding hands under the romantic moonlight.

See, I also can write cr*p

fredpsycho83

23rd June 2008, 22:52

Repack_3 support for version 6/7 maps.

http://rapidshare.com/files/124496917/TT_Nav_7.450.9028_repack3.7z.html

Big Thanxxxx to rab_ppcwarez.

WORK LIKE A CHARM !! :ilove::egdance::egdance:

I have tested it on a (old) Fujitsu LOOX N500 on WM5, with France 720.1802, POI (radars etc), & new car icons ... ALL OK !

the other release weren't recognize by my LOOX N500 (maybe to old), but this one work perfectly.

I have only one question, i have sounds for POI, but tomtom don't recognize them, i have move them in SD\sound\... and in map folder ... but navigator dont recognize it at all ... Files are in OGG format, must be in MP3 ? or where do i must move them to work ?

THX !

basflt

23rd June 2008, 23:02

SUPER and FURRY
wouldn't it be better if ya send PM's instead of spreading yer cr*p around the globe?
:weedman::exactly::weedman:

slavisa11

23rd June 2008, 23:02

It works on my HP HW6515, 2003SE but it is very slow, tomtom screen are late to update , have to wait 1-3 minutes before it update the screen but the voice is updating directly.
It take a lot of time, several minutes to load TomTom when i have WE europe 720.18 map, i have all the time 2-5 mb memory free when the tomtom is running but the tomtom cant change the screen when i drive the car it takes several minutes.
Any ideas what to do, what the problem is?
Cant see the 6.xx maps with repack 2 version.

Thanks for response if somebody know something...
Regards
slavisa

digitalextre

23rd June 2008, 23:10

stephenb

23rd June 2008, 23:30

For those of you who had issues with the original TTUser's cab and not being able to install on other PDAs than the Tytn II, Tilt, etc, can you try this file and let me know if this works.

http://rapidshare.com/files/124522413/ttn7.450_all_PDAs_QVGA.cab

Thanks for sharing but when I tried to install on Ipaq HX4700 with WM5, it says not compatible with my device. Any suggestions?

brooklyn

24th June 2008, 00:48

Thanks for sharing but when I tried to install on Ipaq HX4700 with WM5, it says not compatible with my device. Any suggestions?This a quote from member88 @ ppcwarez. this might be of help to you g/luc.

Hi All,

Thanks to all for making TT7 working on PDA!

Runs fine on HX4700 WM2003SE, running repack 2 (like the small fonts on VGA better )
39 MB RAM free and while running TT7 still have 20 MB or more free, so wonder why some PDA have a memory issue.
Running Western 1GB 7.20 map and all is fine, using BT drivers from ROM as BT driver in cab are v1.4.1 and ROM are v 1.5.0. Only using ttn6bt2003.dll from cab as not present in ROM

My installation procedure:

1) extracted cab file on PC
2) copied data.chk and TomTom Navigator.exe to TT7 folder on SD card.
3) Added Voices folder to the TT7 folder and added voice files.
4) Added map files in folder Western1GB on the root of the SD card. (Schemes, map folder(s), raster, ZIP, are all folders that should be added to the SD Card root. So don't place these folders inside the folder that contains TomTom Navigator.exe. Only add the Voices folder in the same folder as the .exe
5) Added the driver ttn6bt2003.dll to the Windows folder.

Hope it's clear. Love TT7, specially the map correction feature is very helpful.

Cheers

marco900

24th June 2008, 10:38

TomTom 7 PDA screen rotation utility

It is very handy to have option to run TT7 for PDA in landscape and portret mode.

First post, but thanks man.:urtheman:

maxym_urt

24th June 2008, 12:28

Thank you all.
Thanx to solutions found on this forum, I make TT7 working on my Eten X500+ with Western & Central Europe map v720

One think which make I can't sleep. How to make MapShare working? I tried various versions of TTHome soft (1.5, 1.6, 2.0, 2.3). No one makes it possible. Or I missed something?

thanx

manifold

24th June 2008, 18:07

For those of you who had issues with the original TTUser's cab and not being able to install on other PDAs than the Tytn II, Tilt, etc, can you try this file and let me know if this works.

http://rapidshare.com/files/124522413/ttn7.450_all_PDAs_QVGA.cab
Doesn't work on my MDPNA1500 (Lifetec MD 96700) , says the device is not compatible.

[TomTom NAVIGATOR]
DeviceName=MDPNA1500
DeviceVersionHW=Windows CE 5.1

Repack2 or Repack3 are working fine (except tomtom services are not available and mapshare doesn't see the device)

manifold

24th June 2008, 18:08

For those of you who had issues with the original TTUser's cab and not being able to install on other PDAs than the Tytn II, Tilt, etc, can you try this file and let me know if this works.

http://rapidshare.com/files/124522413/ttn7.450_all_PDAs_QVGA.cab
Doesn't work on my MDPNA1500 (Lifetec MD 96700) , says the device is not compatible.

[TomTom NAVIGATOR]
DeviceName=MDPNA1500
DeviceVersionHW=Windows CE 5.1

Repack2 or Repack3 are working fine (except tomtom services are not available and TTHome doesn't see the device)

pug1

24th June 2008, 20:26

http://rapidshare.com/files/124522413/ttn7.450_all_PDAs_QVGA.cab code, but

rapidshare ask for a security and they don't guive any security code!!!

some one had another link???
thank you

superduper

24th June 2008, 20:29

MapShare - HowTo procedure

1. launch TT7 PDA and in menu choose map correction: joint map corrections, select all options except "reported by some".

2. Exit from TT7 PDA, shut down TT Home on desktop.

3. move entire folder "Navigator" on you phone to \program file\ so it becomes:

\program files\Navigator

4. delete following files inside the your map folder. Do this for every single map you have on the phone:

SeverLineIdndex.dat
ServerNameIndex.dat

5. delete the following file in the root of your storage or memory card:

ttnavigator.bif

6. connect your phone to the desktop computer and ensure that it is recognised by ActiveSync or Windows Mobile centre (Vista).

7. Launch TT Home.

TT Home will (likely) to offer you 2 options:

a. program located in \program files\Navigator\
b. program located in \internal storage or storage card (on non-Diamond phone).

8. choose \internal storage or storage card.

9.TTHome will analyse your map and map share corrections will be offered to download for your phone this time.

also, you can now download new car cursors, sounds, colour schemes, voices,etc, etc.

ttnavigator.bif and all files deleted during this procedure will be automatically re-generated for you. Nothing to worry about.

I hope it helps. Let me know the outcome.

Thank you all.
Thanx to solutions found on this forum, I make TT7 working on my Eten X500+ with Western & Central Europe map v720

One think which make I can't sleep. How to make MapShare working? I tried various versions of TTHome soft (1.5, 1.6, 2.0, 2.3). No one makes it possible. Or I missed something?

thanx

sinnedone

24th June 2008, 20:38

Can Anyone tell me if this works on a Palm OS Treo?

Ive been googling all day and havent found a clear answer. lol I'll be more than happy to keep on going is someone might point me in the right directions.

Thannks to all.

superduper

24th June 2008, 20:47

@sinnedone

I hate to tell you, but no chance... :(

Kajoe

24th June 2008, 23:34

Works fine on my HTC Touc Cruise. On a Qtec 100. On ASUS A639.

Kajoe

24th June 2008, 23:49

MapShare - HowTo procedure

1. launch TT7 PDA and in menu choose map correction: joint map corrections, select all options except "reported by some".

2. Exit from TT7 PDA, shut down TT Home on desktop.

3. move entire folder "Navigator" on you phone to \program file\ so it becomes:

\program files\Navigator

4. delete following files inside the your map folder. Do this for every single map you have on the phone:

SeverLineIdndex.dat
ServerNameIndex.dat

5. delete the following file in the root of your storage or memory card:

ttnavigator.bif

6. connect your phone to the desktop computer and ensure that it is recognised by ActiveSync or Windows Mobile centre (Vista).

7. Launch TT Home.

TT Home will (likely) to offer you 2 options:

a. program located in \program files\Navigator\
b. program located in \internal storage or storage card (on non-Diamond phone).

8. choose \internal storage or storage card.

9.TTHome will analyse your map and map share corrections will be offered to download for your phone this time.

also, you can now download new car cursors, sounds, colour schemes, voices,etc, etc.

ttnavigator.bif and all files deleted during this procedure will be automatically re-generated for you. Nothing to worry about.

I hope it helps. Let me know the outcome.

It worked for me. I have a HTC Touch Cruise. I did not found the files SeverLineIdndex.dat and ServerNameIndex.dat in my mapsfolder on the storage card. I only had to delete ttnavigator.bif on the storage Card and offcourse I had to put the Navigator map in program files. I can upload mapshares now. Thank you for this solution.:egdance:

maxym_urt

25th June 2008, 01:22

I tried this but:
I have no Server*.dat files anywhere.
Kajoe, have you copied entire map folter into program files? what PDA you have so you did it? I have 128MB on system "disk"

Which version of TTH software are you using? What device you have chosen in TomTom (web) profile?

I tried with TTH1.6 and nothing happens, excepting it startet to inform me that I connected other device I have chosen in profile.

finally, I figured out that TT company jokes on us. If I have more than one TT device, I have to create more accounts, and each one should be registered with different e-mail. hehe.

jack1976

25th June 2008, 02:52

Same problem for me...
I have a HTC Kaiser.
I follow this step:
- delete the ttnavigator.bif file (no server*.dat on my device).
- activate the mapshare option in TT7 (v7.450.9028)
- start TTHome v2.3.1.92
- select memory card
but..
no update available...
TTHome detect the TT7 in PDA because when i click on system information tab of TTHOme, i can see all inforamtion about my PDA.
TTHome detect all voices installed but... No maps!
Help me!
What version of TTHome i had to use?

maxym_urt

25th June 2008, 03:07

TTH2.3 doesn't see my device (Eten X500+).
TTH1.5 does it, but have no MapShare feature.
TTH1.6 does it also, but offer no download/upload of MapShare data,

ninja279

25th June 2008, 03:15

Does anyone know how to get TT7 to see the maps installed on the internal memory (not the SD Card)?

digitalextre

25th June 2008, 06:14

Updated cab with proper install path.

http://rapidshare.com/files/124697637/TT7WM6_Proper.rar

offlineon

25th June 2008, 07:54

Me confused. TT Home 2.3 (PND version) does not see my HTC Wizard. v1.5 (navigator version) does but does not support map share. Is there a 2.x for Navigator?

maxym_urt

25th June 2008, 12:18

offlineon: try TTH 1.6. it is no on TT webpages curently. You have to search other web pages

pt-1

25th June 2008, 12:50

download that file and follow those instructions. they are the easiest. i tried others instructions but didn't work for me but when i used digitalextre's i got it to work in one try. good luck.

Hi,

I would like to do so but when the Instructions say:
Take meta file from your map I cannot find any Meta File in the Map tomtom_united_kingdom_and_republic_of_ireland_v7_v 720-1802_map_and_tool that I found ...

Content of the Map Directory itself:
26/03/2008 16:36 61,949,636 cline.dat
26/03/2008 16:36 24,877,381 cname.dat
26/03/2008 16:36 18,942,269 cnode.dat
26/03/2008 16:36 9,756,983 faces.dat
26/03/2008 16:36 30 mapinfo.dat
26/03/2008 16:36 3,476,202 poi.dat
26/03/2008 16:36 1,860,078 tables.dat
26/03/2008 16:36 660,320 tmccodes.dat
26/03/2008 16:36 28 traffic.dat

Any hints anyone ..?

I found numerous meta files and txt documents on the web but what structure does the txt file in the insert_meta_from_Map_here Directory need?

I managed to download a free London Map and that one has:
London-9.meta.dct
London-9.meta
London.pna

Anyone ...?

Timber

25th June 2008, 13:23

There is *.meta file - a part of map, and text file Meta.txt (used by keygen) with blowfish keys (they need to decode *.meta file by TomTom firmware).

pt-1

25th June 2008, 13:41

There is *.meta file - a part of map, and text file Meta.txt (used by keygen) with blowfish keys (they need to decode *.meta file by TomTom firmware).

OK,

but where would I get the *.meta file if it is not part of the Mapdownload as mentioned above ..? Also what are the blowfish keys ..?

brooklyn

25th June 2008, 15:01

@ pt-1, could you upload the London map.

Thanxxx.

offlineon

25th June 2008, 15:06

maxym_urt: Thanks. I found this link here

http://www.megaupload.com/?d=MS3D000Q

-edit-

the link is to TT Home 1.6 for Navigator

davidcope

25th June 2008, 19:23

I have installed successfully on an IPAQ214. However the installation procedure overwrites some files connected with Bluetooth meaning that after reboot Bluetooth gives an error 'Insufficient driver memory to start bluetooth'. This can be cured by deleteing Btcoreif.dll and BtSdkCE30.dll. You will notice they are not the same date as all the other 'Bt' files and on deletion they are replaced by files with the same names but now with the standard dates. Whilst TTN7 would recognise my V 6.75 UK and IE map, my 6.50 Singapore map does not show in the map selection window. TTN6 sees both maps and can open both. Anyone any ideas as to why this might be ?

superduper

25th June 2008, 19:34

>> Whilst TTN7 would recognise my V 6.75 UK and IE map, my 6.50 Singapore map does not show in the map selection window

that is correct. 6.75 and above maps only. older maps were not mapshapre enabled. therefore TT has not made support for older maps available in TT7.

Kajoe

25th June 2008, 19:46

I tried this but:
I have no Server*.dat files anywhere.I don't have that too. No problem, than you don't have to delete them
Kajoe, have you copied entire map folter into program files? I have copied the Navigator map completely to program files. The maps western europa is on my SD card.what PDA you have so you did it? I have 128MB on system "disk"

Which version of TTH software are you using? I have tomtomHomeversion 2.3 What device you have chosen in TomTom (web) profile?

I tried with TTH1.6 and nothing happens, excepting it startet to inform me that I connected other device I have chosen in profile. You have to choose between device or SD Card. Choose your SD Card. Than TomTom will say that your device is notr connected to TomTom. Just choose than the lowest option:go on anyway.

finally, I figured out that TT company jokes on us. If I have more than one TT device, I have to create more accounts, and each one should be registered with different e-mail. You don't have to create more accounts. Just click on just go on anyway.hehe.

A lot of questions. The answers are behind your questions. Good luk.

pug1

25th June 2008, 20:06

When I Install Tt7 Repack 2 Or 3 On My Ppc The Sound Doesn T Work Any More
Someone Find Any Solution?
Thanks

onisto

25th June 2008, 20:14

it works :confused: i remove files because i think it works not :pmpl:

possible can you also try this

http://rapidshare.com/files/123874130/TomTom_Navigator.rar

Thanks a lot TTuser ! :urtheman: Ur faster than TT user

Kajoe

25th June 2008, 20:16

When I Install Tt7 Repack 2 Or 3 On My Ppc The Sound Doesn T Work Any More
Someone Find Any Solution?
Thanks

Do the following:
- Go on your device to Windows
- Select in "menu" (taskbar) make "all vissable".
- Search for: "btcoreif.dll".
- Change the name in (as example) "btcoreifOld.dll" .
- Soft reset your PDA en you have sound back

maxym_urt

25th June 2008, 21:10

A lot of questions. The answers are behind your questions. Good luk.

OK. I'm not so stupid, really ;)
I still have no idea what version of TTH you are talking about.
v2.3 doesn't recognize any device. It says 'Connect your device' and that's all.
v1.6 recognizes device (currently it even doesn't show device mismatch). It can see my car (including installed map) and program files directory (including program and voices). Clicking Update button TTH offers newer phone numbers. In Options/MapShare Settings menu only one item is active (setting for reply email). Categories and Removing maps corrections data is unavailable.

However thanx for the attempt

rskiki

26th June 2008, 05:17

Is there anyway the v8.05 Build 1801 Maps will work with TomTom 7.450 PPC version ? If so how do you patch the map ? Any help would be great thanks in advance.

brooklyn

26th June 2008, 08:08

Is there anyway the v8.05 Build 1801 Maps will work with TomTom 7.450 PPC version ? If so how do you patch the map ? Any help would be great thanks in advance.

Repack_3 is working fine on ipaq_3970 with working version 6 & 7 Maps, also Repack 3 will see version 8 maps, by copying the mapinfo DAT File. From a version 7 map, but when I activated & switch map to v8 I get not enough memory.:oops2:

maxym_urt

26th June 2008, 11:04

As far as I know, current 7 and 8 maps have the same content, excepting new v8 features like multiple line exits which doesn't work on TT7. So drop v8 maps and use v7 - you get the same result

l00pz

26th June 2008, 11:24

OK. I'm not so stupid, really ;)
I still have no idea what version of TTH you are talking about.
v2.3 doesn't recognize any device. It says 'Connect your device' and that's all.
v1.6 recognizes device (currently it even doesn't show device mismatch). It can see my car (including installed map) and program files directory (including program and voices). Clicking Update button TTH offers newer phone numbers. In Options/MapShare Settings menu only one item is active (setting for reply email). Categories and Removing maps corrections data is unavailable.

However thanx for the attempt

I also have the same problem.. But is there anyone who got Mapshare working on a PDA?? I only read posts from people who have a HTC..

renmar

26th June 2008, 15:14

no problem on Asus A636N and A696

maxym_urt

26th June 2008, 15:29

renmar, you are very helpful. really.

pinz

26th June 2008, 15:51

brooklyn

26th June 2008, 18:27

offlineon

26th June 2008, 18:42

Kajoe

26th June 2008, 19:01

Got a problem with mapshare. :cry:

My version of Navigator was already in \program files. When I tried to move it to a sub folder TT Home would no longer recognise my HTC Wizard as a TomTom device.

Using v7 map on HTC Wizard. TT Home v1.6. TT Account logs in ok. Deleted .bif file. No *server files.

You may not move it to another subfolder. Just put Navigator map in Program Files. Than TomTomhome wil still not recognise your device? Just click "go on anyway"

superduper

26th June 2008, 19:45

ninja279

27th June 2008, 01:44

the mapshare trick the way I have described is for HTC LISTED DEVICES only. For others, there is much more complecated trck with substitution of .meta.dct files. but that completely different issue all together.

Superduper, are you saying there is a way to get my IPAQrx5915 PDA loaded with V7 and 720 map USA (all in the internal memory) to communicate with TTH V2? If yes could you post the how to?

Thanks

GadgetChick

27th June 2008, 07:27

GadgetChick

27th June 2008, 08:03

I keep getting the 'Your device is not compatible' message. I've tried a couple different zip files from rapidshare.

My device is Dopod 838 pro. (HTC) running WM6

Any suggestions?

Thanks in advance

Never mind - I got it to work using TT_Nav_7.450.9028_repack3-qvga-black.cab from
http://rs223tl3.rapidshare.com/files/124496917/1831765/TT_Nav_7.450.9028_repack3.7z

Thanks so much!!

:ilove:

elroy944

27th June 2008, 10:14

did someone find out to get lane guidenance working? i found this on the internet and was wondering if it works

http://www.goldendev.nl/pix/td/tdtt.jpg

S_Pimpernel

27th June 2008, 11:47

As far as I am aware lane guidance only works with V8 tomtom. As does the IQ routing.

superduper

27th June 2008, 16:00

@ninja279

I believe that MapShare updates can be received on your device, It si in device compatibility list:

http://www.ipmart-forum.com/showpost.php?p=2102610&postcount=20

At this stage it is unknown if mapshare updates has been enabled for your model in particular on TT MapShare server. My understanding that as soon as TT7 is became availble bundled by HP later this year, your device will start receiving mapshare updates.
I don't have access to IPAQrx5915 at the moment unfortunately, therefore there is no chance for me to take a closer look at this issue.

Crozzy_UK

27th June 2008, 17:24

Thx very much for this, got repack 3 working with UK and Ireland v720.1802 working no problem at all on my Mio P550 :)

uzin22

27th June 2008, 17:33

have anybody good installed tt7 navigator on acer e300 or any win ce 5.0?

japonia

27th June 2008, 23:51

The link is dead :-| Please reupload

http://www.anonym.to/?http://rs223tl3.rapidshare.com/files/124496917/1831765/TT_Nav_7.450.9028_repack3.7z

brooklyn

28th June 2008, 01:03

The link is dead :-| Please reupload

http://www.anonym.to/?http://rs223tl3.rapidshare.com/files/124496917/1831765/TT_Nav_7.450.9028_repack3.7z

http://rapidshare.com/files/124599256/TT_Nav_7.450.9028_repack3.7z

masterkeybr

28th June 2008, 03:44

What ca I do for my TTH 2.3 recognize my MIO P550 with TTN7, please relp-me.

Bellfazar

28th June 2008, 04:53

I have an AT&T Tilt (aka HTC Kaiser) and I'm trying to figure out how to get mapshare to work. I followed all the directions in the earlier post and TTH can see my device but whenever I start TTH and tell it to look at my storage card, the automatic update it tries errors out saying:

Error when contacting server: You have an invalid version of the TomTom application installed on your TomTom device. To use HOME you need to install the correct version of the TomTom application.

I can hit the back button and use the TTH options normally except there's a button in the upper right that says "Your map is 41 weeks out of date 26375 free Map Share map corrections waiting" but if I click it, it doesn't find any updates. Did I screw something up?

user009

28th June 2008, 06:20

installed on Dell Axim x51v.
Works, however during navigation, the screen refresh rate is about 1 frame / second. I come up to a turn and the device lags about 1 or 2 seconds behind me. Anyone elese have similar issue?

furrysings

28th June 2008, 12:04

for user009 : nice to see someone else with a sense of reality, see post #148 in this topic

faxounet

28th June 2008, 12:07

Hi everybody

I followed all instructions to install mapshare but nothing happen. Tomtom home V2.3 doesn't see my PPC.

TT7 is installed in the central memory of my Etne M600 in the program files folder and I have removed the navigator.bif at the root of the SD card.

It seeems that I am not alone about this trouble. In certain cases TT home V2 doesn't detect the PPC !!!!

Any idea to solve this trouble

Kajoe

28th June 2008, 21:43

Kajoe

29th June 2008, 00:27

I am going to tell you step for step how I made Mapshare working on my computer.
I have "Navigator" installed in My device and the "Maps" are on my SD Card.

1) open TomTom 7 on your PDA and go to the menu for Mapshare corrections.
Tick all exept the last one.

2) Close TomTom 7 on your PDA. Now we will go on with installation of TomTomHome on your PC.

3) Go to the TomTom site. Make a Account. (or do you have one allready?).
After creating a account you have to go to the upper bar "My TomTom" and change
your device in "GO 720".

4) Download the TomTomHome version for the PNA (One, XL en Go.)
(don't download for the PDA) and install it. (Do not connect the PDA to your computer at

this moment.)

5) Go to your Device en cut the complete map "Navigator" to:
"Program Files" if you have an Englisch version of Windows Mobile on your PDA.
"Programmabestanden" if you have an Dutch version of Windows Mobile on your PDA.
(You can recognise the version, because when you have a Dutch version installed,
"programmabestanden" allready excist on My device.).

6) Allso remove the following files in "Maps" on you SD Card (If not found in "maps"
you don't have to search further, because it doesn't excist than):

SeverLineIdndex.dat
ServerNameIndex.dat

7) Remove "ttnavigator.bif" on your SD Card and in the map "Navigator" on My device.

8) Connect your Device to your computer and make shure that Active sync works.

9) Open now TomTomHome.

10) In TomTomHome you can choose between 2 options: Intern memory or SD Card.
Select SD Card or in Dutch "Opslagkaart".

11) TomTomHome wil now search for updates on your Device. It wil say that something was
going wrong during search. Just select the button "Back".

12) TomTomHome wil now search again. This searching can take a while, so be patient.
When search is ready you'll see that the mapshareupdates are ready to download.

13) Download your mapshareupdates and disconnect your Device.

14) At the next time you'll start up TomTomHome, you will have to start from step 10 again.

Good luck Kajoe

And here for the Dutch.

Even ter info. Ik heb "TomTom Navigator" op Mijn apparaat geinstalleerd staan en
de "Maps" op de SD kaart.

1) open TomTom 7 op je PDA en ga naar het menu van de correcties op kaarten.
vink daar alles aan op de onderste na.

2) Sluit TomTom 7 weer af op je PDA. We gaan nu verder met het installeren van
TomTomHome op je PC.
3) Ga naar de TomTom site. Maak daar een Account aan, als je die nog niet hebt.
Nadat je een account gecreëerd hebt, ga je naar MijnTomTom en verander je
daar het apparaat in GO 720.

4) Download nu de TomTomHome versie voor de PNA (One, XL en Go.)
(Dus niet voor PDA) en installeer deze. (Nog niet de PDA op je computer aansluiten)

5) Ga nu naar je PDA en kopieer de volledige map "Navigator" naar "Program Files"
bij een Engelse versie van Windows Mobile op je PDA en naar Programmabestanden"
bij een Nederlandse versie van Windows Mobile op je PDA. (Je kan dit meestal
al herkennen, omdat de map "Programmabestanden" al bestaat).

6) Verwijder ook de volgende bestanden in je "Maps" op je geheugenkaart ( Wanneer
deze van toepassing zijn:

SeverLineIdndex.dat
ServerNameIndex.dat

7) Verwijder in de PDA op je SD kaart "ttnavigator.bif". Verwijder ditzelfde bestand
ook in de "Navigator" map op je apparaat.

8) Verbind nu je PDA met de computer en zorg dat Active sync werkt.

9) Open nu TomTomHome.

10) In TomTomHome kan je kiezen uit 2 opties: Intern Geheugen of Opslagkaart.
Selecteer daar "Opslagkaart".

11) Het apparaat zal nu even zoeken naar updates en komt dan met de melding dat er een
fout is opgetreden. Druk daar gewoon weer op de knop "Terug"

12) TomTomHome zal nu weer verder gaan met "Laden". Dit proces kan even duren, dus
heb geduld. Wanneer het laden gereed is, zal je zien dat je mapshareupdates gereed
staan om binnen te halen.

13) Haal nu je mapshareupdates binnen.

14) Wanneer je bij een volgende keer weer TomTomHome opstart, zal je weer hetzelfde
moeten doen, vanaf punt 10.

Succes Kajoe

maxym_urt

29th June 2008, 05:39

Thanks Kajoe, but TTH 2.3 (for PNA) offers no option to chose between SD card and internal memory for my Eten X500+, as stated in #10 of your guide.

tangcla

29th June 2008, 11:06

Hi guys, has anyone had any luck with getting this working on a Mio P550? It says device incompatible. :(

marez2

29th June 2008, 12:00

Kajoe: it doesn't work for me, as maxym_urt mentioned - TomTom Home doesn't detect anything (step #10).

Kajoe: what do you mean in step #5[5) Go to your Device en cut the complete map "Navigator" to: "Program Files"

What do you mean by map "Navigator"? Do you mean directory with application or all map files from SD?

TomTom installed to DEVICE\Program Files\Navigator by default for me. Should I do anything?

GadgetChick

29th June 2008, 12:42

Hi guys, has anyone had any luck with getting this working on a Mio P550? It says device incompatible. :(

I couldnt reply to your PM - apparently you're not setup to recieve them, anyways its here:

http://rapidshare.com/files/124599256/TT_Nav_7.450.9028_repack3.7z

Good luck

falafel

29th June 2008, 13:07

Hello falafel!

Excuse me, but you have installed TT7 on your old Navigator 6, or you have disinstalled it and installed TT7 like a new program?

Thanks in advance, bye!

Navigator 6 was automatically removed when installing Navigator 7 :)

tangcla

29th June 2008, 13:37

I couldnt reply to your PM - apparently you're not setup to recieve them, ...
hmmm interesting. Let me look into it...

Kajoe

29th June 2008, 14:06

Kajoe: it doesn't work for me, as maxym_urt mentioned - TomTom Home doesn't detect anything (step #10).

Kajoe: what do you mean in step #5[

What do you mean by map "Navigator"? Do you mean directory with application or all map files from SD?

TomTom installed to DEVICE\Program Files\Navigator by default for me. Should I do anything?

I mean the directory with application. I do not know what else to do. In my case it works. When you open TomTomHome, does the device and/ or internal memory or SD Card not appear?

marez2

29th June 2008, 15:19

I mean the directory with application. I do not know what else to do. In my case it works. When you open TomTomHome, does the device and/ or internal memory or SD Card not appear?Yeah, that's right. Nothing appears, every section of TomTom Home asks me to connect device. Also "Device" in menu is disabled.

Kajoe

29th June 2008, 15:28

pdo65

29th June 2008, 15:37

TT7 works fine on HTC Wizard (Qtek 9100) using Win 6.1 with map Western_and_Central_Europe v720.1803

Hello,

I have also an HTC (QTEK 9100) TomTom v7 and maps v720 is working by me but the function of MapShare is not working!! TTHome see not my device hangs!!

Is this well working by you??

brooklyn

29th June 2008, 15:39

have anybody good installed tt7 navigator on acer e300 or any win ce 5.0?Try this repack thanxxx to (((serge35)))

http://rapidshare.com/files/125814204/Install_TT7_fr.zip.html

Best of luc.

tangcla

29th June 2008, 17:09

I couldnt reply to your PM - apparently you're not setup to recieve them, anyways its here:

http://rapidshare.com/files/124599256/TT_Nav_7.450.9028_repack3.7z

Good luck
I have the same problem, even with the MammaMia pack... :( whyyyyy

marez2

29th June 2008, 18:13

Kajoe

29th June 2008, 18:40

Kajoe: I do the same as on screens and it doesn't work. However thanks for your work.

Could you post screenshot from your "My Computer" with PDA connected? I wonder how your PDA is visible in system. Maybe that makes problem for us...

I made a complete set with all programs and tools and made Tutorials. Maybe that will get it to work for all. I don't have included the maps inhere. You can find enough maps on this forum for it. All Credits go to TTuser. He made the wonderfull easytool.

http://rapidshare.com/files/125859482/TomTom7-Diamond_Kajoe.rar.html

Have fun Kajoe

The Screenshot from my device is added to.

maxym_urt

29th June 2008, 19:10

Hmm. so you have copied entire map from SD card into internal memory?
I don't think there are some PDA which can meet this requirements :)

TommTomm

29th June 2008, 19:14

Kajoe: I do the same as on screens and it doesn't work. However thanks for your work.

Same hier. :afraid:

Dont function with the HTC P3300 and HTC X7500. :suicide:

Greets TommTomm.

maxym_urt

29th June 2008, 19:15

Hmm. so you have copied entire map from SD card into internal memory?
I don't think there are some PDA which can meet this requirements :)

Megapaul

29th June 2008, 19:22

@kajoe i did everything excactly as you said, but tomtom home says no device found, i dont't have an option to to choose internal memory or memorycard.
I have a mda vario

Kajoe

29th June 2008, 19:31

Hmm. so you have copied entire map from SD card into internal memory?
I don't think there are some PDA which can meet this requirements :)

No No No. My MAPS are on the SD Card. Only the software NAVIGATOR is inhere.

Download the "TomTom7-Diamond Kajoe.rar" that I have posted above. Than follow the steps. Do exactly what the Tutorial says. Let me know if you got it to work after that.

TommTomm

29th June 2008, 20:12

Dont function with the HTC X7500 with your metodic.

Greets TommTomm.

uzin22

29th June 2008, 20:17

Try this repack thanxxx to (((serge35)))

http://rapidshare.com/files/125814204/Install_TT7_fr.zip.html

Best of luc.

Thank You but is tha same as in previous versions - not working

TommTomm

29th June 2008, 20:50

Dont function with the HTC X7500 with your metodic.

I dont now why, but now goes on the HTC X7500 with the Mapshare. :suicide:

Have the last TTHome and the folder "Navigator" is in the folder "Programs".
The "maps" I have in the MicroDrive.

But for the HTC P3300 dont function this, have to small intern storage. :afraid:

Greets TommTomm.

danart

29th June 2008, 21:02

pug1

29th June 2008, 22:34

I Have An Ipaq Rx 5915 ? When I Install Tt7 My Gps Doesn T Work§ Bu T When I Used Igo Nav 8 No Problem Whith My Gps;
Anyone Had An Idea??
Thanks;

ktafil

30th June 2008, 00:16

rskiki

30th June 2008, 03:01

Anyone got North America Maps v8.05 build 1801 working with the TomTom 7.450 PPC version yet ?

danart

30th June 2008, 03:43

Never mind - I got it to work using TT_Nav_7.450.9028_repack3....

Thanks IPmart...

marez2

30th June 2008, 10:41

I made a complete set with all programs and tools and made Tutorials. Maybe that will get it to work for all. I don't have included the maps inhere. You can find enough maps on this forum for it. All Credits go to TTuser. He made the wonderfull easytool.

http://rapidshare.com/files/125859482/TomTom7-Diamond_Kajoe.rar.htmlThanks for that, but this version ("TomTom7_Diamond.cab") causes "Your device is not compatible with this version of TomTom VAVIGATOR". I have to use repack3 on my PDA.

The Screenshot from my device is added to.Could you post screenshot of your "My Computer"? I mean this window where your partitions (disks) are listed.

gilinderi

30th June 2008, 15:47

Kajoe in step 5 what do you mean when you say Go to your Device en cut the complete map "Navigator" to:"Program Files",

what do you mean by cut? do you mean delete? or what? can you be more clearer please. many thanks

gilinderi

30th June 2008, 15:49

Has anyone got the mapshare working on their tt7 pda?

mayopeco

30th June 2008, 16:04

gilinderi

30th June 2008, 16:43

mayopeco,

how can i move it to program files when it is already there?

Kajoe

1st July 2008, 00:49

Thanks for that, but this version ("TomTom7_Diamond.cab") causes "Your device is not compatible with this version of TomTom VAVIGATOR". I have to use repack3 on my PDA.

Could you post screenshot of your "My Computer"? I mean this window where your partitions (disks) are listed.

Here is the screenshot from my device.

gilinderi

1st July 2008, 01:22

yes but the screen shot does not explain much, what do you take from each folder and where do you move it, or what do you delete from each folder. A simple explanation would be nice. many thanks

pdo65

1st July 2008, 11:41

Hi everyone on this forum,

I have running TT7 with the map Western Europe v720.1802 on a MDA Vario (same as an HTC Wizard or Qtek 9100) and it works very fine with a lot of new options :excited:

I have install the TT_Nav_7.450_repack3 with no problems :egdance:

But the option for MapShare will not working by me!! I have try all the things spoken on this forum, but it still don't working :ashamed:

TTHome will not see my device :ashamed:

And also the Tutorial of Kajoe will not working for my device :ashamed:

Can anyone help me what I now can do, so it can working for me :punish:

pdo65

1st July 2008, 11:56

Hi to all. I made a Tutorial what made mapshare working on my HTC Touch Device. I made it complete with printscreens. And I made one in English and one in Dutch Language. Maybe this will help you all to get it to work. Please let me know if it worked. Good luck Kajoe:)

Hi everyone on this forum,

I have running TT7 with the map Western Europe v720.1802 on a MDA Vario (same as an HTC Wizard or Qtek 9100) and it works very fine with a lot of new options

I have install the TT_Nav_7.450_repack3 with no problems

But the option for MapShare will not working by me!! I have try all the things spoken on this forum, but it still don't working

TTHome will not see my device

And also the Tutorial of Kajoe will not working for my device

Can anyone help me what I now can do, so it can working for me

gilinderi

1st July 2008, 15:00

for some reason i don't think that mapshare works on xda, apart from kojoe i haven't heard from anyone if the mapshare works

pug1

1st July 2008, 17:24

did someone try to use tomtom map 8 with navigator 7.450.9028?
IF YES, WITCH WHAT RESULTS?
THANKS

pug1

1st July 2008, 17:30

Did Someone Try To Use Tomtom Map 8.5 With Tomtom Navigator 7.450.9028?
And What Was The Result?
Tha

marco900

1st July 2008, 17:57

Did Someone Try To Use Tomtom Map 8.5 With Tomtom Navigator 7.450.9028?
And What Was The Result?
Tha

There is an search in this forum and no it will not work. Maps are also the same only lane assist is different.

gilinderi

1st July 2008, 20:02

tomtom8 does not work with tt7 navigator

rusigor

1st July 2008, 21:28

I have running TT7 with the map Western Europe v720.1802 on a MDA Vario (same as an HTC Wizard or Qtek 9100) and it works very fine with a lot of new options... But the option for MapShare will not working by me!! I have try all the things spoken on this forum, but it still don't working :ashamed: TTHome will not see my device :ashamed:...Can anyone help me what I now can do, so it can working for me :punish:for some reason i don't think that mapshare works on xda, apart from kojoe i haven't heard from anyone if the mapshare works
Hi to ALL!
I have Wizard (Qtek9100) and TT7. And mapshare works like a charm for me and my friends (doesn't matter which PDA to use - you just don't need it for mapshare!).
And why you want to need mapshare? To update your maps, right? So we with a friend of mine about a week share our MAPSHARE files (every day a few mapshare corrections) - look here http://rapidshare.com/users/9HRQAC
And if you can read russian - here is tutorial how to fool TomTom Mapshare and use just a flash-card to get the latest mapshare updates - http://4pda.ru/forum/index.php?showtopic=82653&view=findpost&p=1771241

BTW Two things you must do:
1. Copy 4 files from appropriated map folder to your map folder
2. Switch on mapshare option in your TT7:hifive:

vishal_5

1st July 2008, 21:38

Hi...i have tomtom7 with USA and CANADA v7 maps..if any one wants i can post the link..i use it in my asus p527

gilinderi

2nd July 2008, 00:17

rusigor still can't update the use mapshare it says my htc is not recognised, can you help made

rusigor

2nd July 2008, 01:17

rusigor still can't update the use mapshare it says my htc is not recognised
You didn't read my post with attention - I didn't meant mapshare WILL read your device - I meant if it doesn't - don't worry! You have alternative:
- to use shared updates
- to use fake device for getting updates by yourself - but not your PDA device!

PS I believe they have a list of devices supported by TTHome - and Wizard doesn't belong to it (as much more devices). So choose your option!

PPS Do you want to upgrade your map? Or just want TTHome to SEE your device?:hehe:

ninja279

2nd July 2008, 01:24

I have an HP IPAQrx5915 PDA with tomtom6 preinstalled....Can i have tomtom7 running on my PDA???Where i find the software??I've tried several programs but all of them said that they are not compatible with my device...A little help will be much appreciated.
Thank you.

I deleted TT6 from my 5915 (map as well), I then ran SKtools cleaner.
I copied repack and map into the 'IPAQ GPS' folder then ran the cab. After install I did the keygen then soft reset. I now have a good working TT7 in the 'IPAQ File Store', IGO and Gamin XT on the 4G SD card.

gilinderi

2nd July 2008, 01:53

rusigor how do you get the mapshare with other fake device then?

orenburg

2nd July 2008, 02:34

Hi...i have tomtom7 with USA and CANADA v7 maps..if any one wants i can post the link..i use it in my asus p527

can you post the link ? thank.

Digitalkryme

2nd July 2008, 02:57

I have an RAC 215E

deleted the Route66 software and everything else from the SD card, and installed TT7

the TT software works fine, but its just refusing to find the maps no matter what i do, im now using repack 3 and still no use in finding the maps.

the maps are the uk maps and are in the root folder of the SD card where i also have tomtom installed.

as far as i can tell everything is fine and should be working, but its just a no go, also wont let me download a free map so im stuck with tomtom and no maps which is about as useful as a chocolate teapot in a hot bath!

So any clues as to what it could be would be great.

I've been working on getting this working now for 2 days and im going slightly mad

marez2

2nd July 2008, 03:01

And if you can read russian - here is tutorial how to fool TomTom Mapshare and use just a flash-card to get the latest mapshare updates - http://4pda.ru/forum/index.php?showtopic=82653&view=findpost&p=1771241

Please, note I DID NOT try it, I have NO IDEA if this work, etc. I just translated howto from russian page into english using Google Translator:

III. Updates maps, radar, etc.
It starts with version 7 TT supports custom corrected maps and sharing via TomTom
Updates are a few files (ServerNameIndex.dat ServerLineIndex.dat PatchFilter.dat MapServerPatch.dat) and are accumulating, that is follow include previous.

How to use
copy updates for your card for example hence (http://rapidshare.com/users/9HRQAC) and store it in a folder with a map
independently receive updates and much more from the server TomTom (see video instruction and flash image in the archive http://4pda.ru/forum/attach/1769378/TomTomShare.rar)
Take a clean flash, which vlezaet your card (s) and remains to be 100 meters
put on the flash card (s) and rapakuyte archive http://4pda.ru/forum/attach/1769378/TomTomShare.rar to it
2 install TomTom Home from the site tomtom http://download.tomtom.com/sweet/applicati...E2winlatest.exe (http://download.tomtom.com/sweet/application/home2latest/TomTomHOME2winlatest.exe)
install the device emulator (under Operate my ToTom), close TomTomHome
propatchite emulator and sgenerite code for the card under an emulator (Tools folder at the root of flash: tt7_map_keygen.cmd and tth_dll_patch.cmd), DeviceID emulator for AKVAEA2CQA (You can see in the file at the root ttgo.bif flash)
run TomTomHome, go to emulator (Opereate my TomTom), make sure that your card is activated and in the section Map Corrections agree to accept updates (see video instruction)
go to Update my TomTom, you will be offered updates for your card (if available). To do so, create an account on the site tomtom.com (https://www.tomtom.com/myTomTom/myProfile/index.php?TT=7a1281a6%3Ababa37bd%3A00000000%3A0000 0000%3A00000000%3A00000000%3Ai0gngc0of55pdiblanbcm abmv5)
I have not met updates for the maps of cities, that is if you rasschityvate receive updates for Moscow, need your full regional map (for example Western_and_Central_Europe_720.1803) where there is Moscow, rather than the map of the city itself

P.S.
1) File "X:\tools\tt7_map_keygen.cmd" may don't exist in archive and file "tth_dll_patch.cmd" may need some modification. Please, check http://www.ipmart-forum.com/showpost.php?p=2123093&postcount=273
2) brooklyn mirrored tomtomshare.rar: http://www.ipmart-forum.com/showpost.php?p=2122899&postcount=272

marco900

2nd July 2008, 11:08

Thanks for that, but tomtomshare.rar is corrupt. I can't read romenia so i don't know how to register on that site to see if there is another download.

brooklyn

2nd July 2008, 13:31

Thanks for that, but tomtomshare.rar is corrupt. I can't read romenia so i don't know how to register on that site to see if there is another download.

http://www.savefile.com/files/1643129

marez2

2nd July 2008, 15:45

Someone reported that archive doesn't contain "X:\tools\tt7_map_keygen.cmd" which should be included. Someone replied you can make this file yourself using notepad:@Echo off
set /p input=Enter Device ID:
for /r "\" %%i in (*.meta) do tt7_keygen %%~pi %input%

Please note, you need to change "Application data" in "tth_dll_patch.cmd" if you do not use english version of Windows.@Echo off
for /r "%USERPROFILE%\Application data\TomTom\HOME\Profiles\" %%i in (7-*.dll,8-*.dll,navcore.7*.dll,navcore.8*.dll) do patcher "%%i"

brooklyn

2nd July 2008, 17:46

Anybody have this missing file for the tools folder they can up.
tools\tt7_map_keygen.cmd:oops2:
thanxxx

marez2

2nd July 2008, 17:58

Anybody have this missing file for the tools folder they can up. "X:\tools\tth_ddl_patch.cmd":oops2:

thanxxxRead my previous post again... I missed some names. Now it is correct.

marco900

2nd July 2008, 19:10

TTuser

2nd July 2008, 19:20

why use you not the "easyusetool":confused: it can do exactly the same(activate map, patch homedll) and it works better.

rusigor

2nd July 2008, 20:44

rusigor how do you get the mapshare with other fake device then?
http://www.ipmart-forum.com/showpost.php?p=2122230&postcount=270 - so this the instruction. Note: only files of TT7-fake must be in the flash-card, and of course maps with *.dct files for fake device - in the root of card (TT7 emulator will read them from any folder of the card, but TTHome - not. It sees maps ONLY in the root).
And below I attached several screen shots of my fake TTOne with freshly updated maps

marez2

2nd July 2008, 21:16

why use you not the "easyusetool":confused: it can do exactly the same(activate map, patch homedll) and it works better.I was able to find this one post: http://www.ipmart-forum.com/showpost.php?p=1822991&postcount=4 but link do download is not valid (anymore?)

[EDIT]
OK, I found that: http://www.ipmart-forum.com/showpost.php?p=1860229&postcount=1505

rusigor

2nd July 2008, 22:13

Translation corrections for http://www.ipmart-forum.com/showpost.php?p=2122230&postcount=270

Originally Posted by dklogic
III. Updates maps, radar, etc.
It starts with version 7 TT supports custom corrected maps and sharing via TomTom
Updates are a few files (ServerNameIndex.dat, ServerLineIndex.dat, PatchFilter.dat, MapServerPatch.dat) and are accumulating, that is follow include previous.

How to use

* copy updates for your map for example from here - http://rapidshare.com/users/9HRQAC unrar and store 4 files in a folder with a map
* independently receive updates and much more from the TomTom server (see video instruction and flash image in the archive http://4pda.ru/forum/attach/1769378/TomTomShare.rar)
o Take a clean flash, which contains your map(s) and remains to be 100 mbytes free
o put on the flash map(s) and unrar archive http://4pda.ru/forum/attach/1769378/TomTomShare.rar (or from here http://rapidshare.com/files/126606237/TomTomShare.rar) to it
o install TomTomHome2 from the site tomtom http://download.tomtom.com/sweet/application/home2latest/TomTomHOME2winlatest.exe
o install the device emulator (under Operate my ToTom), close TomTomHome
o patch emulator (can use "easyusetool" from TTuser) and generate key-code for the map(s) in emulator (Tools folder at the root of flash: tt7_map_keygen.cmd and tth_dll_patch.cmd), DeviceID for emulator AKVAEA2CQA (You can see in the file ttgo.bif at the root of flash)
o run TomTomHome, go to emulator (Opereate my TomTom), make sure that your map is activated and in the section Map Corrections agree to accept updates (see video instruction)
o go to Update my TomTom, you will be offered updates for your map (if available). To do so, create an account on the site tomtom.com
o I have not met updates for the maps of cities, that is if you want to receive updates for Moscow, need your full regional map (for example Western_and_Central_Europe_720.1803) where there is Moscow, rather than the map of the city itself

PS To get updates from mapshare you must put your map(s) in the root of the card. Other vice TTHome will not see the map, while emulator - will find it it any folder.