Silent Hack

1) download files and extract those that apply to you: preFP1 of FP1
2) apply the hack using the script (or Profiler aplication)
3) copy CProfDriver_SISX.ldd from RAR into C:\sys\bin
4) install CapsOn.sisx
5) install CapsOff.sisx

To hack the phone, run CapsOff. To revert to normal, run CapsOn
Program runs and exits inmediatly.
To test it, run any unprivileged application and see if it gets permissions.
For example, unpatched X-plorer should be able to access c:\sys\bin\

Remember: CapsOn is normal. CapsOff means hacked.

If you want to uninstall Profile afterwards, you need to copy CProfDriver_SISX.ldd into c:\sys\bin\ again.
I have been told that a tool called PowerBoot allows to start programs on starting of the phone.
I suggest you NOT to do that. Disable security only when needed, not all the time.

I was upgrade my N93 but I'll also do this thx
Repute later ;)

Will work on n73 ? Thanx

it shud work jus try it..

Thank you a lot.
Rep add if i can.
My last question,where i can find patched x-plore?

here are the same files with adjusted icons :

http://www.mediafire.com/?wj1o0txdbyw

http://img505.imageshack.us/img505/3582/cappsoffondc6.jpg

thx for sharing ,very good!

FCA00000 updated the files at his site with icons made by me
here -> files with icons (http://fca00000.googlepages.com/CapsOnOFF.rar)
http://img241.imageshack.us/img241/4926/screenshot0057px6.jpg

dont get this, does this mean that you can install unsigned applications???

finally a method that works on my fp1 ie n81 phone and without having to hook up the serial cable.. I have full write access to sys/bin after running this thanks..

Also as a side note you may want to add it does NOT work if you install to your memory card or e drive only to the C drive.. even if you put the .ldd file in e:\sys\bin it still doesn't work...

also the capson is not necessarily needed as you can reboot your phone thanks. again

finally a method that works on my fp1 ie n81 phone and without having to hook up the serial cable.. I have full write access to sys/bin after running this thanks..

Also as a side note you may want to add it does NOT work if you install to your memory card or e drive only to the C drive.. even if you put the .ldd file in e:\sys\bin it still doesn't work...

also the capson is not necessarily needed as you can reboot your phone thanks. again

No you are wrong mate. You still need to use the method described in the original thread (http://www.ipmart-forum.com/showthread.php?t=238412) for the first time since you need to copy the driver to c:\sys\bin

Thanks for the updates NP

This is so good! I thought the first find was awesome with the whole plugging the phone in USB and killing off folder and file restrictions that way but this is the best!
Now we can access all the folders and files on our phones just like they should have been in the first place!

Rep+ for this absolutely amazing app! :dance::dance::dance:

This method working great at my Nokia N95 ... but, on restart i get "Vrong Data File" and that is annoying!:(
Never mind, rep. +++ for this wonderfull discover!;)

again I didn't say you don't have to hook the cable up originally read the notes off course you do.. but subsequent you don't have to.. and none of the other versions work for hacking my n81 subsequently without re-hooking up serial cable

dont get this, does this mean that you can install unsigned applications???

no i dont think so ... is it NP ?

What can we do after that???????????????????????????

This doesn't allow to install unsigned apps. Only gives unrestricted permissions to programs.

This doesn't allow to install unsigned apps. Only gives unrestricted permissions to programs.

Yes it does :))

but not directly!

it gives u access to the system/hidden folders which is the most important thing!

so just extract all the files within sis and manually copy them to their required folders as per the sis iteration.

then

you have to manually create the hash files (SFA-1 hash value but saved as ascii hex value) for the exe or dll files and manually put this/these file(s) in the c:\sys\hash folder, a bit long but works!

If u cant get a cert then this is a sure way to do it!

:partyman:

thank you great sharing

nice contribution bro...bi thx to u!

i dont understand installation.

what is this . . . 2) apply the hack using the script (or Profiler aplication) . . ???

it f u ...... works!!apsolutely working on n95.thanks so much.it works with xplore.what i wanted.

but how you can copy the file to c:/sys/bin for the first time ?

U must patch your phone with FCA00000 hack...

U must patch your phone with FCA00000 hack...

what is this method?


Where are the files and the steps for it?

First run the hack with cable and then these files?

BIG CONFUSED !! :suicide:

thanks alot np ... rep++ to u .. for more info about the hack go here : http://www.ipmart-forum.com/showthread.php?p=1913931&posted=1#post1913931

cheers

EDIT// must spread around before giving it back to u .. will do when i can

FCA00000 updated the files at his site with icons made by me
here -> files with icons (http://fca00000.googlepages.com/CapsOnOFF.rar)
http://img241.imageshack.us/img241/4926/screenshot0057px6.jpg

When I install them they still look the same...
Small opened box

Great as usual Npope, thanks, repp+

When I install them they still look the same...
Small opened box

reboot after install, so you will see changes..

*.mif files with P@scos icons if you like them more.. :)
just copy to C:\resource\apps\...
enjoy

http://img241.imageshack.us/img241/7010/capsonoffpscobg2.jpg

CapsOff & CapsOn

Paste to C:\resource\apps\

http://img444.imageshack.us/img444/2867/screenshot0104kl3.jpg (http://imageshack.us)

http://img444.imageshack.us/img444/2640/screenshot0105lt8.jpg (http://imageshack.us)

I have installed them, but they don't seem to work in my N95 8GB. I have to do the process of loading "Profiler" manually to get the hack to work. To remove it, I just reboot my phone. Anyone know why it doesn't work for me? I'm using latest Vodafone FW, btw (v15.0.025).

same here. using N6120c. capson and capsoff don't work. I used the FP1_CAPSONOFF

try latest files -> hxxp://fca00000.googlepages.com/CapsOnOFF.rar

*** edit
files uploaded here..
files from first post don't work for FP1 devices..

Where can i find this profiler app??

2) apply the hack using the script (or Profiler aplication)

I can use the Activefile_man_cap with highest privelege now,thanks man!!!!!!

try latest files ->

These ones have worked perfectly. Thanks :)

got it working too.

1. install capson
2.install capsoff
3. copy the CProfDriver_SISX.ldd to c:\sys\bin

did not work when I copied the .ldd file first before installing

got it working too.

1. install capson
2.install capsoff
3. copy the CProfDriver_SISX.ldd to c:\sys\bin

did not work when I copied the .ldd file first before installing

Well, I didn't copy the .ldd again (ie. I left the one I had copied yesterday) and it worked too. I don't really know why it works now... :hahaha2: Maybe because I restarted the phone from yesterday to today? I don't know, honestly, but it works now...

now how install the unsign application i have done all things write now how to install the unsign application like eqalttab

now how install the unsign application i have done all things write now how to install the unsign application like eqalttab

http://www.ipmart-forum.com/showthread.php?t=240577

Read before asking :confused:

it works great with nokia 3250!!!!!
Thanx a lot mate!!!!!!!!!!

Thx for share Npope and rep to u.

when i try to on the caps off my phone nokia n95 will restart what should i do

how can access to c:/sys/bin or with which explorer?
Thnx in advance:(

how can access to c:/sys/bin or with which explorer?
Thnx in advance:(

You can use X-plore,but remember to set options to show hidden and system files,or else you won't see the folders even with the hack active...

I don't know what are FP1 or pre FP1 phones... I have been out of this forum for a while since I was not using a cellphone. I have a nokia E60 which is it?

Silent Hack

1) download files and extract those that apply to you: preFP1 of FP1
2) apply the hack using the script (or Profiler aplication)


what is the second step? what script/profiler application are you talking about?

E60 is preFP1... it's based on symbian 9.1

thanks woj! I'm still not sure about the 'applying hack using script or profiler application' part.

It didn't work at my N93.the program reported "kDSReplyOsError"
Help me.....

CProfDriver_SISX.ldd

Can anybody pls upload this file in Ipmart forum?
i cant seem to download from speedyshare.
thanks for the help

how can access to c:/sys/bin or with which explorer?
Thnx in advance:(

I tried a lot with active file which was my favorite but i can not do it, though it works with ybrowser and xplorer if you change premissions and show hidden files option open

Be aware gang.....

The hack won't work anymore....

I have tried it with the latest firmware (V20.016 for the N95 8GB)......

Nokia wins round 2!!!!

we can win too.......... dnt update ur firmware... lol

we can win too.......... dnt update ur firmware... lol

Yeah right! It's just a matter of couple of days maybe earlier :mrgreen:
FCA is an old talented player in this field :D

100x100 work or my n95.

Be aware gang.....

The hack won't work anymore....

I have tried it with the latest firmware (V20.016 for the N95 8GB)......

Nokia wins round 2!!!!

mmmm....i think all latest firmware can't be hacked....I have the latest firmware for my N93 too....

More info on the hack not working since upgrading the N95 8Gb 2 V.20.0.016:

Tried agian last night 2 hack it with using the python method.....
Now the python hack won't work anymore (1st time it states !!!!candidate!!!!) but now the screen opens, runs a script very quick and dissapears.....

This getting weirder by the hour!!!!

mmmm....i think all latest firmware can't be hacked....I have the latest firmware for my N93 too....Thats not true, N95 21.x can be hacked ...

i am unable to acess c:\sys\bin to paste this CProfDriver_SISX.ldd
i am using nokia 5700

Hi gang.....

Just got of on a private helpdesk session with swankyleo....
He helped me out and got me right back on track using the FCA00000 hack.
It seems - and i feel really stupid saying this and posting it over all the forums that it won't work anymore- that the problem was that I used the new TRK app (wich was not good) and that i didn't disconnect the App trk app when pulling out the USB. Ther4 the hack didn't work anymore ....

I now have caps on and off running.
Everything is fine again....

So again....
Sorry 4 all the mix-ups...
Swanky will post a new thread using his new method without the Python use...
mayB that was the problem with my latest firmware...

Or am i covering up my actions b4?

Once again.... sorry and keep up the good work (FCA00000 and Swankyleo)

Hi gang.....

Just got of on a private helpdesk session with swankyleo....
He helped me out and got me right back on track using the FCA00000 hack.
It seems - and i feel really stupid saying this and posting it over all the forums that it won't work anymore- that the problem was that I used the new TRK app (wich was not good) and that i didn't disconnect the App trk app when pulling out the USB. Ther4 the hack didn't work anymore ....

I now have caps on and off running.
Everything is fine again....

So again....
Sorry 4 all the mix-ups...
Swanky will post a new thread using his new method without the Python use...
mayB that was the problem with my latest firmware...

Or am i covering up my actions b4?

Once again.... sorry and keep up the good work (FCA00000 and Swankyleo)
I'm happy for you mate. Finally all the confusion is over. And FCA00000 wins :excited:

how do i copy CProfDriver_SISX.ldd to c:\sys\bin

it just give me some strange error msg when i try to do that..

you instal profiler on E:\ (memory USB) instead of C:\ then you copy CProfDriver_SISX.ldd to E:\sys\bin with mass storage, i did this way and successfully

With much struggle, I successfully got this to work on my E65 with firmware:
2.0633.65.01
03-10-07
RM-208
Nokia E65
:excited:

http://www.ipmart-forum.com/showpost.php?p=1922905&postcount=356

And Atlast I Too Hacked My Nokia 5700
But I Am Unable To Sign Unsigned Application Even After Sel Signing Using Signsis

I install capon & capoff and strictly followed the instruction but it seems to do nothing!When I run capoff I still cannot access C/SYS but to run appTRK again. tell me how to make it work?

I install capon & capoff and strictly followed the instruction but it seems to do nothing!When I run capoff I still cannot access C/SYS but to run appTRK again. tell me how to make it work?

I think that u missed out 2 first hack the phone....
This is needed 2 use caps on-off.
These 2 apps make UR hack on or off....

Thanx a lot for this GREAT hack... It works on my N95 v.21...

Dont work on 6120c... installed but when run capsoff or on it doesnt work, but python script work just fine...

Dont work on 6120c... installed but when run capsoff or on it doesnt work, but python script work just fine...

mate don't use preFP1 use the FP1_capson and FP1caps0ff

definetly work on 6120c :egdance:

regards,
j0e

I use FP1 not pre...

I use FP1 not pre...

i have latest v04.21

everything i followed the guide and hack successfully

how about candidate?

regards,

Thanks for help, I fix it maybe it was old firmware, but now when I copy driver to both bin folders (on phone mem and on mem card) it works fine

Dont work on 6120c... installed but when run capsoff or on it doesnt work, but python script work just fine...

Mate change the attribute of CProfDriver_SISX.ldd to read only after copying it to its destination. Atleast with that it worked for me in n73 Me. I think otherwise old file comes back in.

hi mate;

--{N_P}--

this is your topic and I did everything But I cant uninstall programme please help me

http://www.ipmart-forum.com/showthread.php?t=240410&page=2

please help me !!! before, thanks for all.

the hack using python script works fine
So I decided to install the two applications capson and capsoff after copying the CProfDriver_SISX.ldd to C:\sys\bin folder. I took the files for FP1 (I have a N95) Unfortunately, when I launch capsoff, I can see the the content of folder c:\sys\bin :-((
I also tried with several versions of CAPSONOFF.rar on this topic


Please help me

You are the best ;]
I have tested and it works ;]

Installed to N73 but don't see Icon...

how about N73 mate?is it preFP1 or FP1 ?

I don´t understand this step, and i searched with no luck...

2) apply the hack using the script (or Profiler aplication)

Can someone help me, please??

I don´t understand this step, and i searched with no luck...

2) apply the hack using the script (or Profiler aplication)

Can someone help me, please??

Need some help here, please...:suicide::confused:

Thanks in advance...

I have hacked my n82 and have gained acess to the hidden folders but the problem is that thrice it has happened that i was using caps on to install xplore 1.22 all acess version and my phone suddenly crashed and gave me an invalid security error and then all files on the 4gb memory card got wiped off and i had to format and restore a backup. second time it was when i made an all files search for a file and it again crashed

if i dont keep the file readonly which is to be stored in resource folder in c .
my phone has been workin fine

is it me or is there some thing worng with keepin the 0000001.rar file read-only
once it was fine but maybe something goes wrong with the cracked versions

can some one HELP?

after i have hacked it in my N80 telephone work unstable. its not good hack!!! sorry but i think that....

thanks bro for this great apps!

working on my n73...

thanks

There is a way if you want to use your updated pc suite and software updater, just uninstall the Nokia Connectivity Cable Driver from add/remove programs and install the one below, it worked for me.

please help me !!! before, thanks for all.

the hack using python script works fine
So I decided to install the two applications capson and capsoff after copying the CProfDriver_SISX.ldd to C:\sys\bin folder. I took the files for FP1 (I have a N95) Unfortunately, when I launch capsoff, I can see the the content of folder c:\sys\bin :-((
I also tried with several versions of CAPSONOFF.rar on this topic


Please help me

same problem here with E51 (fp1)
already tried to make CProfDriver_SISX.ldd read only, no luck
python hack works flawlessy, capson/off no :(

EDIT: woooooaaaaaa restarting the phone seems did the trick, now capson/off works! :dance:

If someone has the patients, i need a lot of help to follow this fix.

I have uploaded some bits and pieces from her there and everywhere, but i don't know if i have all the right stuff.

I have an N73, so i uploaded prefp1 and installed s60_3_0_app_trk_2_7 onto my phone and HelloCarbide, putting the hellocarbide.exe into c/ using y/browser.

I installed Python v2.5.2 onto my pc, but when i open it, there is a chioce of, idle (python gui), module docs, or python (comand line). don't know what any of them do?

I changed the cable driver to an older one on my pc.

I uploaded 00000001, keycert and capsOnOff, don't know what to do with them yet?

So that bring me to stage 7/8/9 on the Hack for Dummies guide, but don't know if i have all the right stuff or what i do with it all now, i can't follow it from this point, I don't understand these following stages.

((((7- On the pc extract from HackFP1.zip and run pyserial-2.2.win32.exe and install it normally like any other program for pc (( not sure if i downloaded this one? is this any of the ones i dowmloaded above?))

8- On the pc extract from HackFP1.zip and run pywin32-210.win32-py2.5.exe and install it normally like any other program for pc ((not sure if I downloaded this one? is this any of the ones i downloaded above?))

9- Now remember Item 3 when you check the com port, now on the pc with notepad open the file hack_perms_s60v3_FP1.py and search for a line like this ser = serial.Serial my program uses COM4 so COM4= ser = serial.Serial(3) and for ex. COM6= ser = serial.Serial(5). ((OK, i looked on my pc and it shows it as COM15))
Modify the number if you have and save the changes

10- We are approaching to the end, first you must be sure that your phone is still connected in PC Suite mode with PC Suite program turned off and the application TRK in the phone is running

11- On the pc run Start/all programs/Python 2.5/Pythonwin and go to File/Run and browse the file hack_perms_s60v3_FP1.py and click ok))))


I need a guide for Extra Dum Dummies....

Any help would be very usefull as i really would like this hack... :suicide:
Thanks...

Yes it does :))

but not directly!

it gives u access to the system/hidden folders which is the most important thing!

so just extract all the files within sis and manually copy them to their required folders as per the sis iteration.

then

you have to manually create the hash files (SFA-1 hash value but saved as ascii hex value) for the exe or dll files and manually put this/these file(s) in the c:\sys\hash folder, a bit long but works!

If u cant get a cert then this is a sure way to do it!

:partyman:

OK, so is there guide to show noobs how to do this? I have access to the system files of 6110 Navigator, but I'm having real trouble installing Vboy 1.31 :afraid:

may i ask what script are you talking about... sorry i cant understand.....

i dont get it... when i run caps off my phone restarts.... and that's it? or i should restart the phone again?

OK, so is there guide to show noobs how to do this? I have access to the system files of 6110 Navigator, but I'm having real trouble installing Vboy 1.31 :afraid:Try following the new way posted at http://www.ipmart-forum.com/showthread.php?t=250439 (Hacking & Signing Simplified). Its damn easy man...no more messing up with Python & stuff ;)

Thanks for sharing.. Very good...

I don't get it, why can't you just leave it hacked?

Where is the profiler application