Garmin Mobile PC software version 5.00.60

Minimum Requirements:
Windows® 2000 SP2, Windows XP or Windows Vista®, 256 MB RAM, at least 800 x 480 display, 1.5 GB free disk space, USB port, DVD drive. Microsoft® Outlook® 2002 or newer required for contact integration. Internet connection required for Garmin Online™ features. Includes USB device drivers. Works on tablet PCs and ultra-mobile PCs with or without touchscreens.

https://buy.garmin.com/shop/store/assets/images/products/010-11018-00/en/cf-lg.jpg https://buy.garmin.com/shop/store/assets/images/products/010-11018-00/en/cf-lg.jpg
http://www.pda4x.com/attachmentes/Day_080419/97_135641_ea536_pxdxa.pic01_resize.jpg

Add full-featured navigation to your Laptop or ultra mobile PC with Garmin Mobile PC. Get maps, millions of POIs, easy-to-use navigation software, turn-by-turn directions that speak street names (English only), route planning and more — all from the trusted leader in GPS navigation, Garmin.

Navigate with Your Laptop
Packed with preloaded maps, millions of destinations and full GPS navigation capabilities, Garmin Mobile PC software turns your laptop into a powerful street navigator. Its intuitive interface greets you with two simple options "Where to?" and "View Maps." Easily look up addresses and services and get turn-by-turn directions that announce the names of exits and streets to your destination. Also receive automatic corrections if you stray off course. With Garmin Mobile PC, you can upload custom points of interest, such as safety cameras, and conveniently navigate to Outlook® Contacts.

Changes made from version 5.00.50 to 5.00.60:
*Provide highlight on the first item in the address list by default when using address wizard.
*Add new saved location to recently found list after edits are completed.
*Correct intersection search capability.
*Correct safety camera capability.
*Correct various software errors that could cause application to shutdown.
*Correct route overview fields after adding via points.

Changes made from version 5.00.30 to 5.00.50:
*Update GPS connection processing for some third party GPS drivers.
*Update COM port searches and display listings.
*Correct the display of the last selection in Fuel Prices if viewed after a Sort is completed.
*Correct the product key entry processing when not connected to the Internet.
*Correct default button highlighting when viewing nearby airports and Contacts.
*Correct default button highlighting when paging up/down on some list fields.
*Correct default button highlighting within address wizard.
*Correct distance display for airports that are thousands of miles away.
*Correct reorder via page to display numbers correctly.
*Correct application error when displaying detour by turns page before having a GPS position.
*Correct default button highlighting when returning to the Main Menu page.
*Correct application error when selecting point information in the Browse Map page.

For more info: http://www.pda4x.com/read.php?tid=65921&fpage=0&toread=1&page=1

Download Link: Garmin Mobile PC v5.00.60
http://rapidshare.com/files/178971106/GarminMobilePC_50060.rar.html

Download Link: Garmin Mobile PC v5.00.50
http://rapidshare.com/files/151412738/GarminMobilePC_50050g.part1.rar.html
http://rapidshare.com/files/151412732/GarminMobilePC_50050g.part2.rar.html
http://www.megaupload.com/?d=TK815H35
http://rapidshare.com/files/151633108/GarminMobilePC_50050.rar.html

Keygen Only:
http://rapidshare.com/files/109737189/JMGARkey.rar
http://www.megaupload.com/?d=T08MZ7JL
http://www.4shared.com/file/45085564/d7dab9af/JMGARkey.html
http://uploading.com/en/files/IDNRDVVV/JMGARkey.rar.html
http://w13.easy-share.com/1700211793.html


Special thanks goes to JetMouse, starix, Lord Yuz and notfaker for the great release..

Sweet, been waiting for this for a long time. I'm following the excellent guide, however I still have trouble connecting to my bluetooth gps unit.

I can start the Garmin PC program after creating the SW.UNL inputing my DEVICE ID and using keygen v1.5.

When searching for my GPS unit selecting the serial port the program searches and searches but finds nothing. The weird thing is that other GPS programs can find it, also NRoute and Destinator and Sygic PC.

I have also tried Franson GPSGate but still cant get it to work. I do belive with the Garmin Mobile XT using the first keygens created an key that worked but was causing problems with connecting to other bluetooth gps units than Garmin original.

;(

works like a charm!thank you !JETMOUSE you are briliant!

ps: Jetmouse if you can pls contact me about a garmin similar soft called truck navigator!i think you are the one to make it work(you know what i mean)

Hellow. I'm new member in this forum. My english is bad so I'm sorry for mistakes.
I've instaled garmin on my nokia n 95 and when I'm trying to start navigation appears window which writes that waiting for better GPS connection? What is the problem? Why I Can't connect? Thank you for your answers

pashmangl.. did u get the program to connect to your bluetooth gps unit?

First time poster, newbe. Downloaded the GMPC from above site. It installed ok, following instructions. Already have Mapsource installed with a n america (I think unlocked ok) and a free open unlocked map of New Zealand. Was able to use mapsource to transfer some map files from both to the GMPC....said successful transfer. But I dont see any maps in GMPC. Any help would be appreciated!

oops! did have the new zealand map...just didnt push the right buttons!

I thought I had the map. I dont. It still doesnt import the map from mapsource to GMPC. I do not have a gps detector plugged in yet. Would that screw it up?

homerjay1977 i don't use any program to connect to bluetooth gps unit!what for?if you have a gps receiver then you must pair with your laptop then start the GMPC as it described in tutorial!this is all and belive me works like a charm!

Thansk pashamangl... I think there is another problem for me. Strange that my other programs can find the bluetooth gps unit but not GMPC. I must check my settings yet again. Its nice to know that it works.... :)

this sucker is for GPS 20 not 10X

is this garmin also for mobile

Hi, I finally solved my problems. Without needing all those GPSgate, and other virtual coms programs. I installed Virtual Serial Port ActiveX Control from Elitima software. This program can DELETE all virtual ports. After this I deleted all of my old and new connected bluetooth items. After this I connected my Bluetooth GPS unit Royaltek RT-1000 and it connected to Com6. Then I started Garmin Mobile PC and selected Serial Com6 and VOILA! Now it works. In my case it was problems with the Com ports so now I can say that the keygen 1.5 works perfect. Also if you use the garmin unlocker utility you dont need to create any *.SWL files for the IMG files.

I think that the PC version is graphic nice but SLOOOW. Its only like 5fps or something. I have an XT7900Pro 512 MB card and it lags a bit. Anyone else have this?

Follow up to map problems...Finally got all the maps working:thanks: to jm and all!

I have a Delorme Earthmate GPS usb. It is not blue tooth capable. My GMPC appears to be unlocked. All maps working great. Am able to import all sorts of stuff from mapsource.

In the GPS settings in GMPC there are options for usb or com ports. The usb setting could not find the GPS. So I went to Delorme and they had software to convert usb to serial to ports. I configured the GPS to port 5, NMEA, and the GMPC to port 5---still did not work.

And the GPS was happily finding sat's and getting a good gps signal with the delorme converter working.

Are there different ways of unlocking the s/w of GMPC?

Any help or suggestions appreciated!

my brother homerjay, i've unlocked the GMPC and the maps using the latest JM ***gen... and i can read the map also... i've deleted all my bt com port except for com port6... i connect my pc to Garmin GPS 10X... the connection went well nevertheless when i start my GMPC, it failed to connect to my beloved Garmin GPS 10X.. did i miss something here?

how do i connect to a NON GARMIN GPS UNIT,

Launch GMPC, when asked "Did this purchase of Garmin Mobile PC include a Garmin GPS Receiver?" click "Yes".


when i click NO its goes into Activation

how do i connect to a NON GARMIN GPS UNIT,

Launch GMPC, when asked "Did this purchase of Garmin Mobile PC include a Garmin GPS Receiver?" click "Yes".


when i click NO its goes into Activation

You must click yes and do exactly how in instruction written.
(works OK with holux m-120 and clicked yes)

lanangjalang,... try and delete ALL ports using the program Virtual Serial Port ActiveX Control from Elitima software. Try also to go to device manager and delete ALL bluetooth serial ports, if there are any left. Then try and ONLY connect your bluetooth GPS device. Pair up and then try and start GMPC. Choose settings GPS and serial port. I hope it works for you. This was my only solution since in the beginning I went crasy but tried on another PC and then all the hardware worked fine. So in the end its an WINDOWS error for me....

homerjay, problem solved! i'm not using any virtual com port. my m-Router is the culprit. after turning it off, my GPS 10X connected to GMPC smoothly....

lanangjalang,... try and delete ALL ports using the program Virtual Serial Port ActiveX Control from Elitima software. Try also to go to device manager and delete ALL bluetooth serial ports, if there are any left. Then try and ONLY connect your bluetooth GPS device. Pair up and then try and start GMPC. Choose settings GPS and serial port. I hope it works for you. This was my only solution since in the beginning I went crasy but tried on another PC and then all the hardware worked fine. So in the end its an WINDOWS error for me....

Do you have link for this software?Full version please :thanks:

follow up to follow up: strangest thing, I repeated everything exactly as described above...but changed to port 3, and for the first time Garmin recognized delorme GPS NMEA signal. I have NO idea why it worked this time! So everything now working, go figure.

follow up to follow up: strangest thing, I repeated everything exactly as described above...but changed to port 3, and for the first time Garmin recognized delorme GPS NMEA signal. I have NO idea why it worked this time! So everything now working, go figure.

Maybe its helps somebody.
BT port cant be, i think so, bigger than 9 (for me it 9, so 9 works)

Link to Virtual Serial Port ActiveX Control from Elitima

hxxp://www.mks.zp.ua/vspcontrol.php

Few notes about this software (5.00.10g)
It's crash when in serch field used national character from my language (estonia)
Can be used *.img names gmapbmap.img, GMAPSUP2.IMG, GMAPSUPP.IMG (maybe somthing more) and serch function works on all of them (of course, if map searchable)
If search city name, it can find city ~500 km from your locations and if no GPS, it puts your location to somewhear in USA.

I hope this helps someone.
My GMPC would not recognize my bluetooth GPS either. I just used my BT manager, removed the com port used by X10, deleted the X10 from the connection list, restarted my computer and told BT manager to add new device. Now GMPC recognizes the X10 and locks on satellites. (Mine is using com 41 BTW)

Now a stupid question. I can not get the GMPC to load maps. I ran a unlocker on all the garmin maps. I also have mapsource and mapinstaller. What have I missed?

I was able to get everything working on my Sprint PPC 6800 and I thought I was so smart.
Thanks in advance

Hav you tryed run:
garminunlocker imgset c:\GarminMobilePC
or whatever your map directory are? And you may use k*gen too to produce unl.

I hope this helps someone.
My GMPC would not recognize my bluetooth GPS either. I just used my BT manager, removed the com port used by X10, deleted the X10 from the connection list, restarted my computer and told BT manager to add new device. Now GMPC recognizes the X10 and locks on satellites. (Mine is using com 41 BTW)

Now a stupid question. I can not get the GMPC to load maps. I ran a unlocker on all the garmin maps. I also have mapsource and mapinstaller. What have I missed?

I was able to get everything working on my Sprint PPC 6800 and I thought I was so smart.
Thanks in advance

That mean your Map still lock.Gmapsupp.unl are solution.

I have Garmin XT installed on my HTC Touch and it works great!

it works ok with my N82 as bluetooth gps mouse... but slow not like the Xt version on my mobile. but i got one problem i cant get any map to work it jsut wont reconise any map jsut the base map i try all the unlock from jetmouse but its not working like on XT any help >????

thank you so much

Tried... Tested... and wokrs well with non-Garmin gps module.

Great work guys

I hope this helps someone.
My GMPC would not recognize my bluetooth GPS either. I just used my BT manager, removed the com port used by X10, deleted the X10 from the connection list, restarted my computer and told BT manager to add new device. Now GMPC recognizes the X10 and locks on satellites. (Mine is using com 41 BTW)

Now a stupid question. I can not get the GMPC to load maps. I ran a unlocker on all the garmin maps. I also have mapsource and mapinstaller. What have I missed?

I was able to get everything working on my Sprint PPC 6800 and I thought I was so smart.
Thanks in advance

Thanks to all who answered and yes I had done both of them.

BTW that is the only time I was able to get GMPC to use/access my X10 and get a satilite lock. So I restored my computer to the restore point I set prior to installing GMPC. This was just to furstrating at that time.

I decieded to try again today. Well all the maps are there. YEA. At this time this is what GMPC is doing when it is not satified with its BT search for the GPS:
Garmin GPS 10X #8BB6C
GPS Unit ID: Unknown
This is in the top left corner of the screen. Then in the center of the screen is another window that says:
Could not authenticaticate Garmin GPS hardware
with an "OK" button

What have I missed
Oh well I guess I go back to reading also
thanks again

i have a in-car entertainment system with built in GPS receiver. I am looking a suitable software and maps of singapore & malaysia. Can this software work on my set?

Below is the specs:
OS: WINCE 4.2 Net Core Edition
Software translate and edit type: ARMV 4
Main Cmos Chip: Samsung S3C2440A-40
Main Memory: 64MB
Storage: 64MB
Navigation Software memory: card or built-in NAND Flash
Main Frequency: 400mhz

Hello to all, I have a big problem with the antenna gps!
Antenna Cellular-line BTGPS440 + HP Notebook with integrated Bluetooth.
I tried in all ways but Garmin Mobile PC does not see the antenna. I tried with the search for bluetooth device, I tried with the virtual serial port but nothing.
The PC sees the antenna port COM10 and I could not rename other ports (COM 5 or COM6) I tried to reset the virtual ports deleted but I always paired with COM10.

Can you help? Thank you. (excuse for English)
:urtheman:

Try this for resolve COM problem

http://www.geekzone.co.nz/forums.asp?ForumId=8&TopicId=422

Try this for resolve COM problem

http://www.geekzone.co.nz/forums.asp?ForumId=8&TopicId=422

Thank you for advice, I did as I have said so! After some difficulty I managed to clear all the virtual serial ports and configure the antenna through the configuration blutooth! be possible to do so in the client applications where you can change the COM port. I hope it was clear :egdance:

this is going sound silly but what maps do i use and where about do i put the maps once ive got them?

anyone know of a uk map that works with this? im trying find a good alternative to tomtom as ive gone off it and this might work great on my car pc :)

Hi guys I live in Greece.

The software installed fine on my laptop and it has no problem to work with my external GPS.

I put the Greek language voice files from my symbian phone and it worked as I expected. I also put inside the greek map with the Greek character Set and all the letters appear normal.

My problem is when I change the language of the Keyboard from english to greek nothing is written in the fields. i.e the cursor doesn't move whatever I type in greek.

There are some XML files with the program languages. I tried to change the codepages there 8859-1 to 8859-7 with no luck. Also if you change the phrases of the interface (for example "Where to?") you don't get the correct letters.

Any help or ideas??

thanks for the post

Once the key is generated and copied to the garmin folder via notepad as per the instructons state, does this activate the software?

I have an ebay 44 channel USB GPS that I will be using with my car pc and the software says it cannot connect to this software unless it has been activated.

What have I done wrong or is there another step I'm missing?

The USB GPS is here: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380035179084

Yes if you do that it connects you to your GPS

Yes if you do that it connects you to your GPS

Wrong, not if you are using another GPS receiver with the app.

Where can get maps of the US? I finally got this thing working! Yeah!! :ilove:

Updated newer version Garmin Mobile PC v5.00.20

Can this just be installed over the last version and the activation already be in place?

Can this just be installed over the last version and the activation already be in place?

@flyguy,
Better to install fresh, save all your unlock key and map to another folder then uninstall old version and install newer version on it. Just transfer back the key and map it should work perfectly. As i already tested to install over the older version it gave me some problem on viewing map and hang.

Come on fellas, could someone point me in the direction of maps for the US? Or just tell me which maps I can use with this. Thanks tons!

Come on fellas, could someone point me in the direction of maps for the US? Or just tell me which maps I can use with this. Thanks tons!

try http://forum.ppcwarez.org/viewforum.php?f=253

I appreciate your response but this is a PC app and not a PPC app. Thanks anyways dude. Still looking for those maps!

I appreciate your response but this is a PC app and not a PPC app. Thanks anyways dude. Still looking for those maps!

Download the relevant City Navigator for the map you require and instal it on your PC. Follow the instructions and it will install the map to the device you select - in your case you should select Garmin Mobile PC

Updated newer version Garmin Mobile PC v5.00.30

Hi I am totally new to the GPS scene. I have installed Garmin Mobile PC, unlocked it, connected the BT GPS, works great.

I have also installed Garmin Map Source, unlocked it, seems to be working.

The trouble is I don't get any maps in Garmin Mobile PC, what am I doing wrong?

In Map source I can zoom in and out on the map see the streets, towns, and cities fine.

Completely lost, can anyone help?

You must select the maps you want in Mapsource with select tool activated after your selection you can copy them to your mobile PC

Hey, Im trying to get Garmin working on my laptop using my TyTN II as the GPS. Managed to get the maps working, but im having problems with the GPS..

Been using GPSGate happily with Sygic and iGo, but when I try to connect to Garmin it just does not see it!! Its begining to get a bit annoying now :-(

Any ideas or suggestions please?

Thanks in advance

TyTNII --> Activsync --> Laptop --> GarminPC NOTHING
--> Sygic & iGo LOCK

How to update to new version?

Guys, pleasse help me.. I upgraded to .30g version from .10 version and now the maps are not working. I get the GPs signal and GPS info correctly, but when I try to view map the program freezes and I have to press the crtl+alt+del and end it there...

any idea how to install "Garmin travel guide europe"

where to put gpi & unl files

Hi guys I live in Greece.

The software installed fine on my laptop and it has no problem to work with my external GPS.

I put the Greek language voice files from my symbian phone and it worked as I expected. I also put inside the greek map with the Greek character Set and all the letters appear normal.

My problem is when I change the language of the Keyboard from english to greek nothing is written in the fields. i.e the cursor doesn't move whatever I type in greek.

There are some XML files with the program languages. I tried to change the codepages there 8859-1 to 8859-7 with no luck. Also if you change the phrases of the interface (for example "Where to?") you don't get the correct letters.

Any help or ideas??

Any news about that?
Has it issued in the newest .30 release?

Did everything about how to install it on the PC and even managed to hook my Bluetooth GPS unit with Garmin but cant get the map to work. Please help. Lots of you are talking about Mapsource, what is that???? And how can I get Uk map in Garmin? Thanks

Hi Gurus... very nice work on the unlocking. I now have Australian map data on my overseas purchased GPS :-)

I've managed to get Mapsource working fine, but I can't seem to get the GMPC side of things right. I must admit I'm using a Garmin GPS V with a serial connection and the first question I have is "do I have a hope"?

If GMPC can be made to work using serial, I then ask "will GMPC allow you to access the map view screens even if the GPS isn't communicating"? If not, I guess that's the problem!

One thing that's common to all my GMPC install attempts is that if you use Mapsource to look at the the Device ID of GMPC, it is always "0" (only). The Settings / About method provides a number which I can generate an unlock from... it just doesn't seem to work :-(

I am wondering if I need to delete some registry keys or folders which have bad data in them from all my attempts, which were as close to the instructions as I could manage. I've pretty much frustrated myself with it tonight, but I'd be immensely appreciative if someone can shed light on what I am doing wrong.

Many thanks,
Steve.

Hi Gurus... very nice work on the unlocking. I now have Australian map data on my overseas purchased GPS :-)

I've managed to get Mapsource working fine, but I can't seem to get the GMPC side of things right. I must admit I'm using a Garmin GPS V with a serial connection and the first question I have is "do I have a hope"?

If GMPC can be made to work using serial, I then ask "will GMPC allow you to access the map view screens even if the GPS isn't communicating"? If not, I guess that's the problem!

One thing that's common to all my GMPC install attempts is that if you use Mapsource to look at the the Device ID of GMPC, it is always "0" (only). The Settings / About method provides a number which I can generate an unlock from... it just doesn't seem to work :-(

I am wondering if I need to delete some registry keys or folders which have bad data in them from all my attempts, which were as close to the instructions as I could manage. I've pretty much frustrated myself with it tonight, but I'd be immensely appreciative if someone can shed light on what I am doing wrong.

Many thanks,
Steve.

Bump :confused:

hello all,

need some newbie help...

i manage to install the garmin mobile PC 5.00.30 fine in my pc... i follow the unlock for the JMGARkey...

the questions, come when i try to view the map Singapore_Malaysia NT v301 through the program... i started a 'Garmin' folder inside C:\GarminMobilePC\

C:\GarminMobilePC\Garmin folder contains gmapsupp.img, gmapsupp.unl, sw.unl (i copied this files directly form my downloaded zip file and paste it in the folder)

Am i doing the wrong thing cause i can't browse/view the map in the program..?

thanks in advance...

Hi guys I live in Greece.

The software installed fine on my laptop and it has no problem to work with my external GPS.

I put the Greek language voice files from my symbian phone and it worked as I expected. I also put inside the greek map with the Greek character Set and all the letters appear normal.

My problem is when I change the language of the Keyboard from english to greek nothing is written in the fields. i.e the cursor doesn't move whatever I type in greek.

There are some XML files with the program languages. I tried to change the codepages there 8859-1 to 8859-7 with no luck. Also if you change the phrases of the interface (for example "Where to?") you don't get the correct letters.

Any help or ideas??

:wave: Any improvements in the latest version??

Just in a case, if anybody trys add second map (gmapsup2.*) with unl file first time and get access code ... and so on
It's strange, but first time, before you activated it, map file name (and serial) must be gmapsupp.img and gmapsupp.unl and after activating it, that files can be renamed to gmapsup2.*

Sorry double post. My connection sucks

hello all,

need some newbie help...

i manage to install the garmin mobile PC 5.00.30 fine in my pc... i follow the unlock for the JMGARkey...

the questions, come when i try to view the map Singapore_Malaysia NT v301 through the program... i started a 'Garmin' folder inside C:\GarminMobilePC\

C:\GarminMobilePC\Garmin folder contains gmapsupp.img, gmapsupp.unl, sw.unl (i copied this files directly form my downloaded zip file and paste it in the folder)

Am i doing the wrong thing cause i can't browse/view the map in the program..?

thanks in advance...

First of all, you need to be sure that the sw.unl and gmapsupp.unl (or whatever *.unl) is set.
Then you need to have basemap, otherwise the first time you run the application, you will get blank. GMPC somehow positioned itself in UK as a start point, so in order to have your location (in this case Singapore) as a start point, you have to pair your GPS device. This way, whenever you run GMPC, your last fix position will be a start point.

the first time you run the application, you will get blank. GMPC somehow positioned itself in UK as a start point, so in order to have your location (in this case Singapore) as a start point, you have to pair your GPS device. This way, whenever you run GMPC, your last fix position will be a start point.

..or install also world basemap (gmapbmap.img) and you can browse map without gps.

http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=64350

First of all, you need to be sure that the sw.unl and gmapsupp.unl (or whatever *.unl) is set.
Then you need to have basemap, otherwise the first time you run the application, you will get blank. GMPC somehow positioned itself in UK as a start point, so in order to have your location (in this case Singapore) as a start point, you have to pair your GPS device. This way, whenever you run GMPC, your last fix position will be a start point.

thanks.... manage to get it done...
I realise Garmin is not the easiest to manage... I maybe wrong...

I start looking into Navigon (with the old timer, Tomtom as backup)

thanks all for your advise...

Thank to you .....software very nice?????

i got this working, if anyone can not seem to get past the gps part after saving the unl file using the unlocker program, double check when you saved the unl file that note pad didnt add .txt at the end.....

everything is working good... great program

Hi. I have a problem while instaling this software on my pc.
Ater install starts appears a infobar: "Previous Garmin Mobile pc version not found. Setup will terminate."
Can someone help me?
P.S. Sorry for my english :oops2:

Garmin Mobile PC software version 5.00.50

_ttp://www8.garmin.com/software/GarminMobilePC_50050.exe_

Change History
Changes made from version 5.00.30 to 5.00.50:
Update GPS connection processing for some third party GPS drivers.
Update COM port searches and display listings.
Correct the display of the last selection in Fuel Prices if viewed after a Sort is completed.
Correct the product key entry processing when not connected to the Internet.
Correct default button highlighting when viewing nearby airports and Contacts.
Correct default button highlighting when paging up/down on some list fields.
Correct default button highlighting within address wizard.
Correct distance display for airports that are thousands of miles away.
Correct reorder via page to display numbers correctly.
Correct application error when displaying detour by turns page before having a GPS position.
Correct default button highlighting when returning to the Main Menu page.
Correct application error when selecting point information in the Browse Map page.

I've recived the same message.
"Previous Garmin Mobile pc version not found. Setup will terminate."
:(
Maybe I should install the earliest version of garmin and then update it?

01. Install Garmin MobilePC using MAIN.msi
02. Run MobilePC
03. Choose "Yes" (Did this purchase of Garmin Mobile PC include a Garmin GPS receiver)
04. Choose "Done"
05. Choose "OK"
06. Choose "Skip"
07. Choose "Yes"
08. Choose "I Agree"

Best Regards

Haha i updated at the main post...for newer version

Hello or good evening

Here I managed well to install programs it garmin 50010 & the charts Europe.

But as I do not have a GPS garmin, he asks me a code with 8 digits, that I do not have of course I not to see how not activated my GPS without this code

I am Belgian and does not speak your language, therefore I become to share a translator
Thank you For your assistance
Michel

Hellow.
Well now I have a new problem. While instaling the garmin appears this info text

http://img518.imageshack.us/my.php?image=92126717qg3.png

***?
Should I download Disk1.cab file and paste it somwhere?

Hello or good evening

Here I managed well to install programs it garmin 50010 & the charts Europe.

But as I do not have a GPS garmin, he asks me a code with 8 digits, that I do not have of course I not to see how not activated my GPS without this code

I am Belgian and does not speak your language, therefore I become to share a translator
Thank you For your assistance
Michel

Hi mate, I also didn't find any 8 digit code when I installed mine, so I forgot about it and use the device Id instead. If you look into Tools>Setting>About you will see device ID there. Use this to generate your key.

Hope this help. :good2:

Haha i updated at the main post...for newer version

Mayby say Thank you..

Thank you
found the solution, by looking at the post, best; have to place both file made with the block-note in C: garminmobilespc instead of C: garmin.

Michel

Hi,
can someone help me to find Dutch language file (text file)
Garmin Mobile PC v5.00.50
Thanks.

Hi guys great forum here.

Im having a problem garmin mobile pc wont find my holux bt321 bluetooth reciever. I tried everything and all it does it just keeps searching for attached devices. Im using a hp pavillion laptop.

Can anyone please help. Can anyone also point me to maps of the Uk please

waiting for your reply

Hi guys great forum here.

Im having a problem garmin mobile pc wont find my holux bt321 bluetooth reciever. I tried everything and all it does it just keeps searching for attached devices. Im using a hp pavillion laptop.

Can anyone please help. Can anyone also point me to maps of the Uk please

waiting for your reply

Check first if u got the connection between PC and GPS (SPP profile).
For UK u could use CNEURO 2009 NT (V11)

it works ok with my N82 as bluetooth gps mouse... but slow not like the Xt version on my mobile. but i got one problem i cant get any map to work it jsut wont reconise any map jsut the base map i try all the unlock from jetmouse but its not working like on XT any help >????

WHAT DO U MEAN?
PAIRING YOUR GARMIN PC WITH N82 AS A BLUETOOTH GPS?
IS THAT POSSIBLE?
PLEASE SHARE IT IN MORE DETAIL!!!
BECAUSE I HAVE ALREADY N82 WORKING WITH GARMIN XT, AND NOW I HAVE LAPTOP WITH UNLOCKED GARMIN PC, I TRIED TO PAIR WITH N82 AS A GPS BLUETOOTH BUT ALWAYS FAIL.... :oops2:

:thanks:....IN ADVANCE!

this aplication work with internal gps or any reciver ?

I have many Waypoints / My Locations in MobleXT on my Imate 9502 Wm6.1.
How can I use these waypoints from the GARMIN_WPT.NVM file in this excellent MobilePC version. as they are now called Favourites.

I have many Waypoints / My Locations in MobleXT on my Imate 9502 Wm6.1.
How can I use these waypoints from the GARMIN_WPT.NVM file in this excellent MobilePC version. as they are now called Favourites.

Hi...I have the same problem which is to transfer my existing waypoint from GarminXT to Garmin Mobile PC. Have you found the solution?

this aplication work with internal gps or any reciver ?

It can work with internal gps or any gps receiver when you get sw.unl with a correct device ID. Just follow the "instruction.txt" on the 1st page....

Hi...I have the same problem which is to transfer my existing waypoint from GarminXT to Garmin Mobile PC. Have you found the solution?

Hi dtbogor...if you haven't found the solution to transfer your waypoint to GMPC, you may want to try this method.

I just upgraded my Mapsource to version 6.13.7 and used it to transfered all my waypoint from GMXT in my HTC pda to GMPC using the "Received from device" (from GMXT in HTC pda connect via usb cable) in Mapsource software and than used the "Send to device" to transfer all my waypoint to GMPC.

Now all my waypoints is shown in GMPC Favorites....

Where can i find maps ? ??

have anyone road 2008 ?

have anyone road 2008 ?

Request for maps here:
http://www.ipmart-forum.com/showthread.php?t=295978

Hellow.
Well now I have a new problem. While instaling the garmin appears this info text

http://img518.imageshack.us/my.php?image=92126717qg3.png

***?
Should I download Disk1.cab file and paste it somwhere?

All you have to do is Run *.MSI file not the Setup file. Follow the instruction and you'll be right.

Question about NT maps: I download the Garmin and use the Keygen to generate Serial number for Garmin, that's fine but it seem doesn't have any Australia NT map 2009 in it (the keygen) --> cannot generate serial for the Map itself. I'm thinking about newer version of keygen, is it the 1.5 the latest keygen at the moment guys??? Why it doesn't have Aussie NT? Only America NT 2009.

Anyway, I downloaded a Melbourne map NT 2009 (claimed unlocked already) and put the "gmapsupp.img" file into Garmin folder and it doesn't show anything on the main navigating screen!!! BUT Browsing Map is showing the Map!!! :afraid: ----> wth is going on? Is this version of Garmin compatible with NT 2009 map version???

Any help welcome.:urtheman:

Hello,Can someone tell me where to find the fille with the greek language text?
Thanks

yes , i wont it to , but romain text lenguage ?

Hi all, don't know what I'm doing wrong but I cannot get any maps to work. on the laptop.

Have the latest europe maps and the usa maps from the posts. have updated my nuvi and so know that the maps do work on the nuvi.

Have installed the software and works great, picks up my usb GPS-360 (which came with ms maps & streets software).

The program tells me that the maps created with MapSource (unlocked thanks to JetMouse). Cannot be used with my device id.

Have tried the instructions on front post. deleted and reinstalled the software used regedit to ensure nothing left in registry.

I have the Garmin 860 nuvi but this is updated etc on my main sys so no way that it can be getting the codes confused with the laptop.

Out of ideas. Any help greatly appreciated.

Your question is out of topic.
GPS device cannot get enough signal if you are in a building. Go outdoor and check again. The GPS software you should use is Mobile XT, not Mobile PC.

Thx.


Hellow. I'm new member in this forum. My english is bad so I'm sorry for mistakes.
I've instaled garmin on my nokia n 95 and when I'm trying to start navigation appears window which writes that waiting for better GPS connection? What is the problem? Why I Can't connect? Thank you for your answers

Updated newer version at the main post....

Garmin Mobile PC version 5.00.60
Change History

Changes made from version 5.00.50 to 5.00.60:

* Provide highlight on the first item in the address list by default when using address wizard.
* Add new saved location to recently found list after edits are completed.
* Correct intersection search capability.
* Correct safety camera capability.
* Correct various software errors that could cause application to shutdown.
* Correct route overview fields after adding via points.

refer to first post for download link.

Thx

Hi, can someone help me pls?
My unit (WinCe 5) wont recognize my sd card anymore after a restore with "Pocket Controller Pro". Does someone has a solution about what to add/change at the registry? Thanks so much.

Just few quiestions.

First it was a drag which at frist seemed like childs play comparing to XT version install for N96...but boy was I wrong...

I have HP6820, and for some reason after first install on logical drive D: device got recognized once and than MapSource or MapInstall could not read out the device ID (to mention I mistook when first installed and clicked trial), but reading took me to erase files in root://Docum and ...**/GarminMobile PC removed folder repeated procedure but no way. Had to format and partition Logical drive D in order for Mapsource to read out device new created disck.

Followed the instructions to word several times, but the prob is that Mapsource does not want to download/upload into device selected maps. Info: all maps are unlocked regions with needed codes for GMPC?? When I got to loading all went OK up until 60% - 90% depending on mapset and than I get message that operation is canceled koz of communication with device??

I have gmapsupp which I found as freebase map, and managed to get Adria as whole gmapsupp, but problem remains EUROPE koz it would needed to be whole which would be a drag for loading (I presume).

Questions
1. Does or will MapSource find device and not report error if I connect GPS BT which I bought today and still charging (SiFR STAR III)...?Meaning manage to upload to PCdevice since obviously one for XT would not work, koz of different unlock codes and I dunno how to create gmapsupp and appropriate unl file, as I asid MapSource would not create *.img file without device. Please if anny suggestions I appreciate it alot (PM or..)

2. Can some1 confirm that new version work, according to instructions, as one .50

TBH I thought at first it is some virus or something, despite protections which I have. Did some1 find or see anything? Maybe it is just my paranoia kicking in agan :hahaha2:

:ilove::weedman:

Hi !!!!

Greeting to all forum members from Lima Peru !!!!!!!!!!!!!

I am new to the forum and hope you guys can give me a hand.....

It appears to be Garmin Mobile PC 5.00.600 does not want to run on my HP Laptop. :oops2:

I have installed the program following instructions (from Main.msi) and it installs fine to C:\GarminMobilePC but when I try to run it I initially see some HD activity but program does not run or come up on screen... :oops2:

If I go to Windows Task Manager I can see QUE.EXE sitting idle with no CPU usage and about 5.5MBof memory usage.

I hope someone can point me in the right direction !!!!! :excited:

Thanks in advance !!!!!


JCC

UPDATE.....

Just to see what happened I installed version 5.00.60 into my desktop running Windows 2000 and everything works !!!! Problem is..... I need to run it on myLaptop that was Windows XP....

Any ideas ????? :sorry:

Tks !!!!!!

JCC

Hi all, I tried to post earlier but something went wrong, hey its Vista any surprise?

I don't usually have any problems with installs (when I remember to read the instuctions properly!!) and this time I did read and follow instuctions perfectly BUT GMPC keeps telling me it can't use my device ID (the one it has given me!!) to unlock the maps? I don't understand whats going on as I have definatately done everything ver batim but it wants to be difficult!

Any ideas at all please and thanks.

Edit...well I have got it to work perfect on my car puter with no trouble at all, it just doesn't want to work on this laptop. Will try again might have a clue where I went wrong.

Edit 2 OK I was right where I went wrong so both puters now running GMPC perfectly with my Qstarz bluetooth receiver. Thanks for the upload, really appreciated and running Aus 2009 maps...woohoo!!

thx, for the updated gmpc

Can we connect to use Build-in GPS Phone?

HI, thx alot. i am able to install and run it, i get the signal, but, there is no map. Anyone can help me where to download and how to transfer it to GMPC?? thx alot in adv

UPDATE:
Found the solution, i just copied the img files from my GMXT to GMPC. and make sure the the new keys are correct. then voila.... i found the answer in the posts. Thx to everybody and especially Ioji! :yourock:

Glad to find out that somebody actually read my posts and get their answers from there :D:

well done !!...i've been looking for this like hell...>_<...thanks a lot dude !...:D

Pse i have a Nokia N96 with internal gps.
Would like to install the Garmin.
Please where to find it with the map and a tutorial how to install it?
Thanks.

great great work Man (Men), thank you very much

Hi,

I cannot get this working. I wanna use the PC version without connecting to PPC. Just for offline purpose.

I copied the gmapsupp.img I used for PPC in the PC version folder and added teh required unl files but nothing shows up in the PC version. It is all blank. How can I make it show the map?

Thanks.

where is the map source i cant find it thanks

can someone give a clear guide to unlock the map?
what is the mapid? where to download the map? what are the procedure?
i read thru the steps but not so clear...
can someone help?

I have 2 problems with Garminn Mobile PC:
1. I can't get it to calculate route for Truck, there is no option in menu just car/motorcycle, pedestrian and bicycle. Is there another way to do this?
2. And if anyone has other text languages, romanian, please upload them here

thanks

Is this for laptops and not for pocket pc?

im really interested in the n82 users comment where he says he used his n82 as the external gps receiver and paired it via bluetooth to his garmin pc app .... is this really possible?? .... can anyone post a faq on how to do this ....

yes u can use ur ppc/mobile as an external gps reciever..
pair with ur laptop/pc & use with garmin on the go.

u'll need GPS GATE download from the forum, but its only for windows mobile
for symbian there must be other services, check out in symbian section.

how to configure.. you can have a look here
http://franson.com/forum/topic.asp?TOPIC_ID=3973

Follower where to savis unlock code but cannot find the sw unlock not in that folder

Hi Guys,
Kindly help me to find GARMIN software to be downloaded to my HTC Touch Diamond2..
Thank you...

Hi Guys,
Kindly help me to find GARMIN software to be downloaded to my HTC Touch Diamond2..
Thank you...

Here it is:
http://anonym.to/?http://www.megaupload.com/?d=D3VN3DCR
Basemap and support files on official site.

Is it possible to use a TomTom car GPS as the receiver for Garmin Mobile PC?

Thanx.

Is it possible to use a TomTom car GPS as the receiver for Garmin Mobile PC?

Thanx.

U can use any ppc with BT

http://www.pda4x.com/read.php?tid=51822

I don't think TomTom car gps is gonna work. TomTom uses a linux disto and the link is for wince. i googled a similar program for tomtom linux and nothing came up

Thanx 4 the tip.