WIMP - Where Is My Phone v. 1.3.0.0

In the event of your phone being lost or stolen, you can simply send a specially formatted SMS text message to the phone and the W.I.M.P software will silently intercept it. W.I.M.P. will then send back a message containing the phone's GPS location in a format which can be entered into any common mapping application.

[Only registered and activated users can see links]

OK - so someone steals your phone. What is the first thing they're going to do? Change the SIM card right? The W.I.M.P. application will automatically detect a change in the SIM card and send you a text message containing the new number. You can then use that number to track the device's location or even ring the phone!

W.I.M.P. will always run covertly in the background, it will even automatically start when you reset the phone ensuring it is always protected.

Features
Runs silently and covertly in the background. It doesn't even show in the list of running programs.
Will send your phone's GPS coordinates via text message, allowing you to accurately track your phone's location using any common mapping application (e.g. [Only registered and activated users can see links] ([Only registered and activated users can see links]))
If the SIM card is replaced on the phone, it will automatically send a text message informing you of the new number

Thank you..

People that are using this and/or ultimate theft alert.. which one do you recommend? i'm going to try this one now and see how it holds up.

My concern is does in runs in WM2003SE and how much internal memory will it be taking up ?

I like this program but cannot register with my IMEI number
I see when open the program,it asking for pin number,maybee know something.
I have no pin in my sim card...

Same problem

Tried usual default PIN of 0000 and OK from then on

Thank you that was usefull,have a nice day

want remote sms or remove sim then destroy my data eg. hardreset.

I can't get the keygen to work either.

I am getting my IMEI from Settings -> System -> Device Information.

I then input the key from the keygen and get an "Invalid PIN" error.

Thanks for the upload anyway :)

I can't get the keygen to work either.

I am getting my IMEI from Settings -> System -> Device Information.

I then input the key from the keygen and get an "Invalid PIN" error.

Thanks for the upload anyway :)

Err... Wrong PIN? Are you sure you enter the code into the right box?
A quick how-to:
1. Open your phone app (press the green button) and enter *#06#
2. Enter your IMEI number into the keygen.
3. Open WIMP, enter 0000 as they first access key, you may change it later.
4. Open menu under the right softkey and choose to register, enter the key from keygen and voila...

any apps like this for palm??

Why the file size of the cab is different than the original?

bathrinath, thanks for the advice, but *#06# gives the same IMEI as the method I used - I still get an invalid pin error. I had already tried 0000 to get into the app itself as you suggested.

If it works for others, I'll assume it's just strangeness on my handset :)

Paranoid's Question: this technology seems very mature and handy. But if we can do on our own phone, will others use it against us? Like spying on our sms, emails, password, calls, location and stuff? It could already have been hidden covetly in one of the game we downloaded and installed! Then it lurks in our lovely device and always ready to sniff personal data out of us!!! The thought of it send chill thru my spine.
No I am not crazy!! No..NO!!:afraid:

:backtotopic:Well, the keygen doesnt work for me anyway. I follow exactly the instruction, and triple check my Imei nbr.

Good apps, have to test it :)

Hi Guys,
I noticed that in the main settings screen of W.I.M.P that the imei shown for my device had 2 extra digits on the end. I put this extended imei in the keygen and it all registered fine. Hope this helps

Great Work , Great Tool :) it work´s, but i see it on my Programms ....Steathmode Hide Programm is on....

Hi Guys,
I noticed that in the main settings screen of W.I.M.P that the imei shown for my device had 2 extra digits on the end. I put this extended imei in the keygen and it all registered fine. Hope this helps

Strange, I can only see the IMSI in the app's settings, not the IMEI. The IMSI code doesn't work for me - I wouldn't expect it to as the IMSI is tied to the SIM card and can be easily replaced, which sort of defeats the whole point of WIMP :confused:

Hmm! I just managed to get WIMP to accept the key made from the IMEI. I pasted the same key in 4 or 5 times then suddenly it was accepted :good2:

sry to bother is there anything like this for a palm device?

seems like the key gen cannot work i am using my imei with the phone without sims card n with sims card, the code cant work. Thanks Pls advise

shud i try .. :-)

thank you.. This is a real PDA police ;)

But don't works in HP iPaq hw6515h win2003 se

Great!! Worked fine on my HTC TYTN 2. Tested it and it showed the " Thief's" IMEI, phone number and geographical coordinates. Loaded the coordinates at google maps and Voila-- thief's location is showed :)

tnxxxxxxxxxxxxxxxxxxxxxxxxxxs

Key doesn't work on my P3600

doesn't work on my trinity.

installs fine, but when an sms sent to my phone, no sms sent back... :suicide:

any idea why?

if the person hardresets the PDA without inserting the SIM card, would the prog be redundant??

if the person hardresets the PDA without inserting the SIM card, would the prog be redundant??

and your point this question here is?????:backtotopic:

and your point this question here is?????:backtotopic:

Perhaps I should phrase it properly:

There are many who knows that the 1st thing to do if you pick up a fone and intend to keep it, is to hard-reset it.

If the 'thief' hard-resets the PDA first, then insert the SIM card, then the program would have been uninstalled. In that case, it cannot perform its function of sending sms to the designated fone no I set. Or does it still reside within the fone and ignore hard-resets?

My humble apologies if I had sounded like challenging the functionality of the prog, becos I've tested it and it works wonderfully (although a lil' slow to send out the sms.)

Perhaps I should phrase it properly:

There are many who knows that the 1st thing to do if you pick up a fone and intend to keep it, is to hard-reset it.

If the 'thief' hard-resets the PDA first, then insert the SIM card, then the program would have been uninstalled. In that case, it cannot perform its function of sending sms to the designated fone no I set. Or does it still reside within the fone and ignore hard-resets?

My humble apologies if I had sounded like challenging the functionality of the prog, becos I've tested it and it works wonderfully (although a lil' slow to send out the sms.)

I suppose that your average " THIEF" does'nt know how to hard-reset this PDA.

Working so far on my ATT Tilt / HTC Kaiser.

Guys, use the method Bath stated for finding your IME number. The one shown inside the WIMP program is your SIM card number. Use the default PIN (0000) when you first open the program. Then plug your IME into the keygen.

Those that tried and didn't get a text, make sure you use the international format for the phone number (+1XXXXX...)

Thanks again Bath. :ilove:

Err... Wrong PIN? Are you sure you enter the code into the right box?
A quick how-to:
1. Open your phone app (press the green button) and enter *#06#
2. Enter your IMEI number into the keygen.
3. Open WIMP, enter 0000 as they first access key, you may change it later.
4. Open menu under the right softkey and choose to register, enter the key from keygen and voila...

i don't think sprint uses imei numbers... that code doesn't do anything on my sprint touch... how would i use the keygen? is it possible? sounds like a cool app...

keygen not working

it says application failed 2 initialize properly

Thank you from me too that was usefull.

i tried to test this program but every time i send a message to get the gps location of my phone i recieve the message: "cannot get GPS location after 3 minutes"
Anyone have the same problem?

i tried to test this program but every time i send a message to get the gps location of my phone i recieve the message: "cannot get GPS location after 3 minutes"
Anyone have the same problem?

Try to change the GPS Timeout number to the highest number allowed and see if that works. I think the highest you can go is 9.

any news on a better keygen?
it doesnt register on my phone,
i put the imei on the gen but the activation code is not the correct serial number :(

phone: MIO A701

very usefull app

very usefull app
+++:good2::good2:

Perhaps I should phrase it properly:

There are many who knows that the 1st thing to do if you pick up a fone and intend to keep it, is to hard-reset it.

If the 'thief' hard-resets the PDA first, then insert the SIM card, then the program would have been uninstalled. In that case, it cannot perform its function of sending sms to the designated fone no I set. Or does it still reside within the fone and ignore hard-resets?

My humble apologies if I had sounded like challenging the functionality of the prog, becos I've tested it and it works wonderfully (although a lil' slow to send out the sms.)

Then, it should be cooked with ROM i guess..

does this work with Omnia?

does this work with Omnia?

best way to know is to try it .....

Thank´s work fine ....htcp3300

damn. i lost my password and i cant re-install either. please help.

installed on the omnia

when i send the text i get

Problem reading from Serial Port on device!

Works nicely. At first I had the problem with activating becouse IMEI on box and phone aren't identical. So checked with *#06# and the keygen made the right key.

installed on the omnia

when i send the text i get

Problem reading from Serial Port on device!

Me too!!!!:angry:

Send a specially 'formatted text SMS', how to test?

So how do we WIMP. Very simple really. By default, after installation, the PIN code for WIMP is
0000. Send a text message to your phone with the message “$WIMP0000” (without quotes).
Depending on how WIMP is configured, it can take between 1 and 10 minutes for WIMP to respond.
If you change your PIN code for example to 1234, then the message to send would be $WIMP1234.

cant get this to work

keeps saying it cant find gps location or something like that

gps is workin on my phone, as i am current running igo8

Me too!!!!:angry:

you need to check the com port and baud rate matches what you have in your gps settings

thank you i finding it

i install it and when i click to open it under programs my phone shows loading for a minute then does nothing and just stays at the programs page like i never clicked anyhting in the first place. i tried installing it to my memory card and internal memory

has anyone actually got this working?

Cannot get GPS location after x minutes.

any ideas how to sort this?

Hello
Can please someone answer this silly question ??
If we hide it from everywhere how can we call it (i.e if we want to change something in settings)??
thnx

tested on omnia, can't get a gps lock.

hi key gen not working..

my imsi is 4220xxxxxxxxxxx

pls some one provide me the reg. no..pls pls

hi key gen not working..

my imsi is 4220xxxxxxxxxxx

pls some one provide me the reg. no..pls pls

Dont post your imei nr on open thread
PM have been send about Reg.no

Members can send me there IMEI no through PM only

what is the specially formatted SMS text message? How we can do it?

gps times out on omnia

I get teh GPS timeout message on my Omnia also............ is this just another of the major GPS problems the Omnia seems to have?

Worked fine first time on my mate's HTC Diamond, but the Omnia doesn't ever wanna seem to access its GPS for ANY program without messing around with port splitting!

Anyone got any ideas or managed to get it to work on an Omnia?

[QUOTE=Broad;2001109]
WIMP - Where Is My Phone v. 1.3.0.0

In the event of your phone being lost or stolen, you can simply send a specially formatted SMS text message to the phone and the W.I.M.P software will silently intercept it. W.I.M.P. will then send back a message containing the phone's GPS location in a format which can be entered into any common mapping application.

[Only registered and activated users can see links]

OK - so someone steals your phone. What is the first thing they're going to do? Change the SIM card right? The W.I.M.P. application will automatically detect a change in the SIM card and send you a text message containing the new number. You can then use that number to track the device's location or even ring the phone!

W.I.M.P. will always run covertly in the background, it will even automatically start when you reset the phone ensuring it is always protected.

Features
Runs silently and covertly in the background. It doesn't even show in the list of running programs.
Will send your phone's GPS coordinates via text message, allowing you to accurately track your phone's location using any common mapping application (e.g. [Only registered and activated users can see links] ([Only registered and activated users can see links]))
If the SIM card is replaced on the phone, it will automatically send a text message informing you of the new number

not working in my htc p3400i, i tried by all means & all versions but key gen not working,it says invalid key]

please send me activation code wimp 1.3.0.0