Here's My TomTom 520 Back Up

Including Latest Easytousetools,

Navcore V8.002.9117,

United Kingdom and Republic of Ireland map V805.1801,


It should work with any TomTom x20/x30

It may also work with other TomTom's?

The System file has already been cracked, All you need to do is activate the map and speedcams, I've included the latest Easytousetools.



Download:

Deleted due to personal information

All uploaded:excited:

Will this effectively change a 520 to a 530 ??
Will TMC still work ? anything missing or not working ?

How do I install it !!

THANKS:excited:

Thanks Shauneco
I deleted the data from my 520 and then installed your files from the backup. When I start the Tomtom it just tries to load and the reboots continually. Any ideas on a solution?

Hi,
The same thing happened to me as well. I have a GO 520 with V7 navcore. The solution to remedy to this in my case was simply delete everything and recopy the backup copy I had. So guys, always save in a safe place a backup of your original files just in case before you try anything else.
Regards,
Hidalgo!

First of all thank you very much "shauneco" for your files. After playing for few hours with my Go 520 I managed to get everything working.

Thanks Shauneco
I deleted the data from my 520 and then installed your files from the backup. When I start the Tomtom it just tries to load and the reboots continually. Any ideas on a solution?

I had the exact same problem, this is how I solved it:

1) Make a backup
2) Format my tomtom.
3) Download the files provided by "shauneco" in the 1st post.

Then I started my tomtom which resulted in rebooting ...

To fixed it:

I downloaded Navcore 8 for x20 devices:
Link:
[Only registered and activated users can see links]

Extract Rar file, Copy the contents of the folder "navcore_8.002.9117.gox30" to the flash drive on your TomTom x20, Let it replace files etc..

Disconnect your TomTom x20 let it start up, Then reconnect to pc replace the "ttsystem" file with the "ttsystem" file extracted from the Rar file. then reboot ...

This simply fixed my rebooting problem. the next step would be to download your v8 map, activate it and enjoy :).

I hope this has helped you.

Here's My TomTom 520 Back Up

Including Latest Easytousetools,

Navcore V8.002.9117,

United Kingdom and Republic of Ireland map V805.1801,


It should work with any TomTom x20/x30

It may also work with other TomTom's?

The System file has already been cracked, All you need to do is activate the map and speedcams, I've included the latest Easytousetools.



Download:

Part 1: [Only registered and activated users can see links]
Part 2: [Only registered and activated users can see links]
Part 3: [Only registered and activated users can see links]
Part 4: [Only registered and activated users can see links]


and which map and version had you orginally on your tomtom?

and which map and version had you orginally on your tomtom?

I had the cracked V8 Navcore installed when I made the back up, Also the United Kingdom and Republic of Ireland map V805.1801.

All I removed was my private data, To make it work you may have to reset your TomTom so it creates a new TomTom ttgo.bif file and also activate your map.

Not sure what else your required to do to make it work, I merely uploaded my latest back up.

Other people seem to have got it to work so it shouldn't be too hard to figure it out.

All files are their.

Hi

I'm thinking of upgrading my 520T to Navicore v8.

If I install this backup will everything work ??
Will I lose any features or functions ?
Any problems using the computer voices, linking to mobiles / TMC etc ??

As long as I backup my current system, if things go wrong is it simply copy back the old files ?

Thanks

First of all thank you very much "shauneco" for your files. After playing for few hours with my Go 520 I managed to get everything working.



I had the exact same problem, this is how I solved it:

1) Make a backup
2) Format my tomtom.
3) Download the files provided by "shauneco" in the 1st post.

Then I started my tomtom which resulted in rebooting ...

To fixed it:

I downloaded Navcore 8 for x20 devices:
Link:
[Only registered and activated users can see links]

Extract Rar file, Copy the contents of the folder "navcore_8.002.9117.gox30" to the flash drive on your TomTom x20, Let it replace files etc..

Disconnect your TomTom x20 let it start up, Then reconnect to pc replace the "ttsystem" file with the "ttsystem" file extracted from the Rar file. then reboot ...

This simply fixed my rebooting problem. the next step would be to download your v8 map, activate it and enjoy :).

I hope this has helped you.

Hi,
Just like to say many thanks to you and Shauneco, by following both your posts i have now managed to update my tom tom :)

anyone else looking to update their uk tom tom map if you follow the advice and files given in this thread you shouldnt go wrong (If i manged it then anyone can :hehe: )

Hi
Thanks for the post.. makes me fell easier to upgrade.

Do all the bit work etc ?? Computer voices etc ??

Cheers

Hi
Thanks for the post.. makes me fell easier to upgrade.

Do all the bit work etc ?? Computer voices etc ??

Cheers

as far as i can tell yes,voices seem to work, so do mp3 music files ect, i only have the original tom tom so some of the options are greyed out like txt to speech ect

just tried adding the Iberia_v8.05.1801 map to it and that works fine too :D

Hi,
Just like to say many thanks to you and Shauneco, by following both your posts i have now managed to update my tom tom :)

anyone else looking to update their uk tom tom map if you follow the advice and files given in this thread you shouldnt go wrong (If i manged it then anyone can :hehe: )

:D No problem, I am glad I could help.

Hi
Thanks for the post.. makes me fell easier to upgrade.

Do all the bit work etc ?? Computer voices etc ??

Cheers

Well ... As far as I can tell everything is working, such as computer voices, bluetooth and V8 Maps,

hi guys i'm trying to upload maps for v8 to my tt520. unbale to download maps, link coming up as error. please help.