adil44
25th June 2008, 08:52
FreeCallSprite with KeySounds(official version v1.00 update)
http://img237.imageshack.us/img237/2188/screenshot0001mv1.jpg http://img93.imageshack.us/img93/7448/screenshot0002yx7.jpg
http://img212.imageshack.us/img212/7070/screenshot0003eu5.jpg http://img143.imageshack.us/img143/312/screenshot0004kp5.jpg
Translate :
The official version v1.00 update:
1, connected to the former support after the shock and vibration connected
Note: Due to connect after the shock of the method is adopted to retain and restore an effective way to shock, the system will produce some of the dialog will go away, so the other side before the call is connected in one to two seconds did not hear any sound . Use this method for any problems the author will not bear any responsibility. If this method on a certain number of issues, please use the vibration connected to the former method.
2, connected to the former lower vibration frequencies, more energy-efficient
3, lights and speakers features may function in some version of three machines will be on the issue, the proposed use of its own tests after the (typical: N73 does not support lighting effects, will lead to procedures are not normal)
4, increasing dial-up assistant functions, namely, the dial-up enter the number is automatically find the appropriate contact numbers and lists. Support and display window of a few, and the median number matching set.
Note:
(1, and because of certain third-party input method (A4 input method!) There is a conflict, it removed the * key and the # key support.
(2, when the dial-up, if left softkey or the right softkey is pressed, the assistant window will be closed until next dial-up.
(3, do not support the call at the show.
(4, from top to bottom can be used to select the corresponding number, middle button OK for dial-up.
(5, use the dial-up assistant functions may be affected pronunciation key tone.
5, will set up a classification
6, can be installed to a memory card
Note: Due to the Permanent background, if installed to a memory card, could lead to can not use USB data transmission. Strongly recommended to the phone memory.
Beta version update:
1, and connected to shock
(Note: Because the call is connected is the method adopted to retain and restore an effective way to shock, the system will produce some of the dialog will go away, so the other side before the call is connected in one to two seconds did not hear any sound . Use this method for any problems the author will not bear any responsibility if you do not like the way to achieve this, I will re-join the next version of the former connected to the vibration mode.)
2, since the increase in start-up launched
3, set to increase
(Note 2: lighting option is only the third edition of the S60 models FP1 effective, such as the N95, N76, 5700, etc.)
4, increasing dial tone
(Note 3: installation package does not contain procedures for dial tone, you can download and put a separate phone c: \ data \ KeySounds \ folder, the audio file format must be wav, the file name must be 0. Wav, 1.wav ... 9.wav, 10.wav "#" Music, 11. Wav "*" Music. Note that this document should be the path: c: \ data \ KeySounds \ 0.wav)
http://img237.imageshack.us/img237/2188/screenshot0001mv1.jpg http://img93.imageshack.us/img93/7448/screenshot0002yx7.jpg
http://img212.imageshack.us/img212/7070/screenshot0003eu5.jpg http://img143.imageshack.us/img143/312/screenshot0004kp5.jpg
Translate :
The official version v1.00 update:
1, connected to the former support after the shock and vibration connected
Note: Due to connect after the shock of the method is adopted to retain and restore an effective way to shock, the system will produce some of the dialog will go away, so the other side before the call is connected in one to two seconds did not hear any sound . Use this method for any problems the author will not bear any responsibility. If this method on a certain number of issues, please use the vibration connected to the former method.
2, connected to the former lower vibration frequencies, more energy-efficient
3, lights and speakers features may function in some version of three machines will be on the issue, the proposed use of its own tests after the (typical: N73 does not support lighting effects, will lead to procedures are not normal)
4, increasing dial-up assistant functions, namely, the dial-up enter the number is automatically find the appropriate contact numbers and lists. Support and display window of a few, and the median number matching set.
Note:
(1, and because of certain third-party input method (A4 input method!) There is a conflict, it removed the * key and the # key support.
(2, when the dial-up, if left softkey or the right softkey is pressed, the assistant window will be closed until next dial-up.
(3, do not support the call at the show.
(4, from top to bottom can be used to select the corresponding number, middle button OK for dial-up.
(5, use the dial-up assistant functions may be affected pronunciation key tone.
5, will set up a classification
6, can be installed to a memory card
Note: Due to the Permanent background, if installed to a memory card, could lead to can not use USB data transmission. Strongly recommended to the phone memory.
Beta version update:
1, and connected to shock
(Note: Because the call is connected is the method adopted to retain and restore an effective way to shock, the system will produce some of the dialog will go away, so the other side before the call is connected in one to two seconds did not hear any sound . Use this method for any problems the author will not bear any responsibility if you do not like the way to achieve this, I will re-join the next version of the former connected to the vibration mode.)
2, since the increase in start-up launched
3, set to increase
(Note 2: lighting option is only the third edition of the S60 models FP1 effective, such as the N95, N76, 5700, etc.)
4, increasing dial tone
(Note 3: installation package does not contain procedures for dial tone, you can download and put a separate phone c: \ data \ KeySounds \ folder, the audio file format must be wav, the file name must be 0. Wav, 1.wav ... 9.wav, 10.wav "#" Music, 11. Wav "*" Music. Note that this document should be the path: c: \ data \ KeySounds \ 0.wav)