gkataria
25th June 2008, 18:59
FreeCallSprite v1.01 released a bugfixed Updated 25/06/08
FreeCallSprite needs to sign before installion. You must sign it with your dev cert.Note: This release need the NetworkControl cap and does not support open signed online.
Bugfix in v1.01 version:
1, Fix the bug that DTMF sound can not be sent.
2, Fix the bug that when key sound in profile is enabled, key sound when dial don't stop.
3, Fix that when sendkey pressed, the helper window keeps display until call connected.
4, Some other small bugfix.
What's new in v1.00 version:
1, Support both vibrating before connected and after connected.
(Attention: Due to the high proirity of the phone app, any notify after call will be ingoned. The trick is that when call is connected, FreeCallSprite will hold the call for half a second to make vibration run and then resume the call, and there will be some system auto-disappear dialogs. So the receiver will hear nothing when call connected for a second or two. I have warn you about this! If it can't function right, please use the vibration before call connected function)
2, Decrease the vibration frenquency in order to save battery.
3, Lights and loudspeaker functions may not work on 3RD MR machines(Such as N73), you may test them before you use them.
4, Add dial-up helper function
Attention:
(1, * and # are not supported because of some 3rd FEP.
(2, the dial helper will be disabled if you press left or right soft key until next dial.
(3, dial helper when call connected is not supported
(4, when there is a list, you can use up and down arrow to select number and use the OK key to dial.
(5, there may be some affect to the dial key sounds when you enable dial helper function.
5, settings are sorted.
6, you can install FreeCallSprite to memory card.
Note: I recommand you install FreeCallSprite to phone memory, or the USB data transfering mode may not start.
FreeCallSprite needs to sign before installion. You must sign it with your dev cert.Note: This release need the NetworkControl cap and does not support open signed online.
Bugfix in v1.01 version:
1, Fix the bug that DTMF sound can not be sent.
2, Fix the bug that when key sound in profile is enabled, key sound when dial don't stop.
3, Fix that when sendkey pressed, the helper window keeps display until call connected.
4, Some other small bugfix.
What's new in v1.00 version:
1, Support both vibrating before connected and after connected.
(Attention: Due to the high proirity of the phone app, any notify after call will be ingoned. The trick is that when call is connected, FreeCallSprite will hold the call for half a second to make vibration run and then resume the call, and there will be some system auto-disappear dialogs. So the receiver will hear nothing when call connected for a second or two. I have warn you about this! If it can't function right, please use the vibration before call connected function)
2, Decrease the vibration frenquency in order to save battery.
3, Lights and loudspeaker functions may not work on 3RD MR machines(Such as N73), you may test them before you use them.
4, Add dial-up helper function
Attention:
(1, * and # are not supported because of some 3rd FEP.
(2, the dial helper will be disabled if you press left or right soft key until next dial.
(3, dial helper when call connected is not supported
(4, when there is a list, you can use up and down arrow to select number and use the OK key to dial.
(5, there may be some affect to the dial key sounds when you enable dial helper function.
5, settings are sorted.
6, you can install FreeCallSprite to memory card.
Note: I recommand you install FreeCallSprite to phone memory, or the USB data transfering mode may not start.