OK, those aren't "my" programs, but the info is scattered across 3 web boards, 12 threads, and hundreds of pages; and often in slightly garbled gibberish.
This purpose of this post is just to make the relevant info easier to find and understand.

If you already have TT6 installed, check and write down your device ID (looks like ABCDE 12345)

Download and unzip TT_Nav_7.450.9028_repack3-qvga-blue.cab.zip
http://www.megaupload.com/?d=QKT0CLRF
This will result in a *.cab file.

Copy the cab file to your PDA's memory card. Run it there. Try installing the program on the memory card, if your PDA supports it.

Find the most current maps that are compatible with this software. At the moment, those are 720 maps. 800 series maps are not compatible.
You might also want to load "lighter" version maps if there are several for your area, like DACH instead of WACE, or USA/Canada instead of NA. This will prevent several of the older PDAs from choking on them ;)
Download these, and put them on your memory card.

Download and unpack "Easy tools for PDA 7 and PND 7 and 8.zip".
The tools therein will work under "real" Windows machines as well as under virtual ones, like XP/Parallels/Mac.

Enter your device ID into the file named DeviceID.txt
If you can't find that information, briefly start TT7 on your PDA, and copy the ID from the ttnavigator.bif that will be created on first launch. This file can be opened with Notepad or TextEdit.

Copy the files $your_area.pna and *.meta into the folder named insert_meta_from_Map_here, for example USA_and_Canada.pna and USA_and_Canada.meta.

Run RunMeforDCT.cmd, option 2 "Run it for Navcore 7 up to 8.002", then option 1: "Run Keygen for insert_meta_from_Map_here".

Copy the newly generated file *.meta.dct into the map folder.

Start TT7 on your PDA. Enjoy.

Just for your information:
I've got this to work on a T-Mobile Wing and a couple of Dell Axims x30

Now if somebody wants to reply with a way to make TomTom Home work with this setup, that would be nice ;)

And please keep the silly questions down to a dull roar.

PS:

You can download voices via your PDA's internet connection, or use the ones from a TomTom PND.

Here's some additional content for you: some car cursors to start you off, a few English voices, and today's quickfix data. Drop the folders from this archive on your memory card.

http://www.megaupload.com/?d=CIKZUZVZ

http://i37.tinypic.com/24fwuhj.jpg

http://i33.tinypic.com/14azv2v.jpg

PS:

You can download voices via your PDA's internet connection, or use the ones from a TomTom PND.

Here's some additional content for you: some car cursors to start you off, a few English voices, and today's quickfix data. Drop the folders from this archive on your memory card.

http://www.megaupload.com/?d=CIKZUZVZ
Hi
Is there any software that is able to download directly on the PPC the quickfix data? So far I have been unsuccessful in finding one.... :(

Start TT7 on your PDA. Enjoy.

Just for your information:
I've got this to work on a T-Mobile Wing and a couple of Dell Axims x30


Brilliant Tex88!

Worked first time on an HP iPAQ5550. :thanks:

I have repped you accordingly, many others should too.

Hi
Is there any software that is able to download directly on the PPC the quickfix data? So far I have been unsuccessful in finding one.... :(

Hmmmm....I got TomTom Home to download the quickfix onto the device by placing the ttgo.bif from my One into the root of the memory card of my Wing, via cardreader, not ActiveSync.
It then "installed" the most current official version of the One software on the memory card. Doesn't interfere with the actual installation of TT7 on it. After that, "Update my One" got me the quickfix, but no mapshare updates yet; because the "latest application" that got installed is 6.560 for TT PNDs.

Ok, I'll just copy the ephem folder from the ONE XL I have every now and then, it is still easy enough :)

OK, so apparently to get mapshare to work, you'll need version (9029), not (9028) from this post.

Thanks Guys this worked a treat - was using TT6 on my TyTnII now using TT7 - :)

can someone please help me install this on Dell X51v pls?

Should be pretty much exactly the same as explained. Worked for a couple of Dell x30 with the latest official ROM from Dell, which was WM2003SE

OK, so apparently to get mapshare to work, you'll need version (9029), not (9028) from this post.

Does anyone have a VGA version of 9029 they could send me or link to?

The VGA 9028 works great on my mio p550 but the ability to use mapshare/tomtom home etc would be great.

Have any other improvements been made to the 9029 version?

Searched on google etc but can't seem to find any 9029 downloads :(

Cant download the zip file can some one help please....

How do I download Easy tools for PDA 7 and PND 7 and 8.zip and http://www.megaupload.com/?d=CIKZUZVZ ??

The zip fails to download and the megaupload link is invalid.

TomTom_7_MapShare_How To with instructions, very simple & works.:exactly:

http://www.badongo.com/file/10601177

Hi there all, I've installed Tomtom 7 and the GB maps onto my O2 XDA MINI S (Imate K-Jam) PDA, everything works perfect apart from the sound, I'm sure the 'voices' folder and files are in the right place on the memory card, I've even renamed the 2 DLL files as others on other forums have suggested, but no joy with the sound.

Anyone have any ideas?

Thanks in advance.

The sam problem about sound an also BT on my HP Ipaq HX4700.

I started with WM 6.1 and a clean reset.
MY Ipaq works fine, sound is OK and BT is working fine.

I installed the TT NAV 7 qvga (but I tried also with qvga) and at th end of installation (after reboot), the sound slider didn't work (the volume is 0 it's possible to go up and down but it's impossible to save the new volume level) and BT doesn't work. I red that for BT it's necessary to rename 2 dll in PPC Windows folder.

After a clean reset (I lost the TT installation) the volume and BT now works fine.

Any suggestion?

Hi
Is there any software that is able to download directly on the PPC the quickfix data? So far I have been unsuccessful in finding one.... :(

Doesn't matter. The QuickGPSfix file is pointless on a TomTom on a PDA. Think about it.

why would it be poitless? It takes so much less time to get the fix.

Because it doesn't work that way with an external GPS receiver, that's why. These will find the satellites when they'll find them, and ephemeris data won't help them, because data flows one way only from them.
Quickfix only works with PNDs, and possibly (but I don't think so) with PDAs with integrated receiver.

I have an integrated receiver on my asus pda and it works :2thumbsup:

Glad to hear that. I got HOME to download and install the fix by placing the .bif and the ttsystem file into the root of the memory card, if that helps you :)

Where should I be looking for the TTSYSTEM file?

I borrowed it from my ONE.

Glad to hear that. I got HOME to download and install the fix by placing the .bif and the ttsystem file into the root of the memory card, if that helps you :)
That would be something to try, but my final goal was to have a win mobile application that updates the data on its own. ;)

Ok I got the USA and Canada map downloaded to my PC using uTorrent, but now I have no idea what to do with it. Could someone tell me what I should do to get this onto my Mogul's TomTom7 and how I can go about doing it? Please help me out if you can. Many thanks in advance.

Ok I got the USA and Canada map downloaded to my PC using uTorrent, but now I have no idea what to do with it. Could someone tell me what I should do to get this onto my Mogul's TomTom7 and how I can go about doing it? Please help me out if you can. Many thanks in advance.

Did you even bother to read the first post in this thread?

Did you even bother to read the first post in this thread?

yes, and couldn't find it explained after thoroughly reading it it. also the megaupload link of tomtom7 doesn't work anymore :( . could someone repost it?

yes, and couldn't find it explained after thoroughly reading it it.

I utterly fail to see what's missing. Just follow those steps exactly as described! So, what do you think is missing?

also the megaupload link of tomtom7 doesn't work anymore :( . could someone repost it?

http://www.megaupload.com/?d=QKT0CLRF

Hi
I have got this working on my MIO 168.. seems OK.
Couple of things I'd like to get sorted though.

How do I remove all the installed voices and just have KATE ? (computer voice) ??
Any way to force this onto the memory card ? running from the system uses a lot of memory !!

Thanks :)

Hi
I have got this working on my MIO 168.. seems OK.
Couple of things I'd like to get sorted though.

How do I remove all the installed voices and just have KATE ? (computer voice) ??

Delete all the files in the voice folder.
Download just Kate from within TomTom. Internet connection required, either from the PDA, or thru ActiveSync.

Any way to force this onto the memory card ? running from the system uses a lot of memory !!
Thanks :)

The voices? Or the entire program? I've got it installed on the memory card during installation. Try moving the entire program folder to the memory card.

Cheers

I don't see anyway to download new voices ?? Will they work in TT7 on PDA ?

I'll try moving all the files and will post back.

The voice files are all the same. And they can be downloaded through Preferences, Voice Preferences, Download Voice.

Moving the files to my SD card seems to have worked.
Created a new 'Program Files' on the SD card and moved Navigator from the PDA into their.
Then moved TomTom from the PDA to the root of the SD card.

All working.. Now to try and get the voices sorted... any one ??

The voices can be stored in a folder conveniently called Voices in the root of your memory card. You can simply move the contents of the voices folder from your main memory to that folder.

Normal UK voices work fine. But I have no option for Kate (computer voice)
Any way to add that.

I don't seem to be able to download it via TT7 on my PDA..
Can some one explain how to do that ??
THANKS

Oh, KATE...no, won't work. I was thinking of Kathy.

OK Thanks... shame !!

Tex, I have problems with the second Megaupload as well. They didn't remove the file, but after the countdown I can't download neither with a download accelerator nor usual IE download window.

I am downloading some other stuff from Megaupload as we speak and works fine.

Could you try it once more, or maybe a different host?

Thanks a lot for this great release!

OK, those aren't "my" programs, but the info is scattered across 3 web boards, 12 threads, and hundreds of pages; and often in slightly garbled gibberish.
This purpose of this post is just to make the relevant info easier to find and understand.

If you already have TT6 installed, check and write down your device ID (looks like ABCDE 12345)

Download and unzip TT_Nav_7.450.9028_repack3-qvga-blue.cab.zip
http://www.megaupload.com/?d=FFB71LC0
This will result in a *.cab file.

Copy the cab file to your PDA's memory card. Run it there. Try installing the program on the memory card, if your PDA supports it.

Find the most current maps that are compatible with this software. At the moment, those are 720 maps. 800 series maps are not compatible.
You might also want to load "lighter" version maps if there are several for your area, like DACH instead of WACE, or USA/Canada instead of NA. This will prevent several of the older PDAs from choking on them ;)
Download these, and put them on your memory card.

Download and unpack "Easy tools for PDA 7 and PND 7 and 8.zip".
The tools therein will work under "real" Windows machines as well as under virtual ones, like XP/Parallels/Mac.

Enter your device ID into the file named DeviceID.txt
If you can't find that information, briefly start TT7 on your PDA, and copy the ID from the ttnavigator.bif that will be created on first launch. This file can be opened with Notepad or TextEdit.

Copy the files $your_area.pna and *.meta into the folder named insert_meta_from_Map_here, for example USA_and_Canada.pna and USA_and_Canada.meta.

Run RunMeforDCT.cmd, option 2 "Run it for Navcore 7 up to 8.002", then option 1: "Run Keygen for insert_meta_from_Map_here".

Copy the newly generated file *.meta.dct into the map folder.

Start TT7 on your PDA. Enjoy.

Just for your information:
I've got this to work on a T-Mobile Wing and a couple of Dell Axims x30

Now if somebody wants to reply with a way to make TomTom Home work with this setup, that would be nice ;)

And please keep the silly questions down to a dull roar.


I've read a couple of guides, and this one is the best - worked first time :good2:

I have been trying to install this on a Samsung SCH-i760 phone. I was able to install the program and some voices, but it would not read the maps correctly. So I repatched the maps and now when I attempt to start the program, the TomTom splash screen comes up then dissapears and an error pops us saying "not enough memory to run this application". I Checked the memory and there is over 30 MB (out of 64 mb) available. I have uninstalled and reinstalled the program as well. Any Idea what I am doing wrong?

Anyone have an executable or patched cab for TTN 7.450.9030? This is the Tomtom "authorized" version that will allow access to TT Home, etc. Thanks.

Download and unzip TT_Nav_7.450.9028_repack3-qvga-blue.cab.zip

Works fine on htc Touch 3450 with external gps.
:partyman:

Tex, Big props to you, I have a mogul and have been trying different cabs, etc and finally came across your postings. I have to say this is the FIRST one that makes sense with all the map activation etc, and does not leave the steps out. I have the North American map running smooth although I have to use astrolauncher to get it ging but I alreadyhad it installed from using TT6 and I did not have to modify anything . Great job in not leaving out critical steps..Thanks a million !!!!

Anyone have an executable or patched cab for TTN 7.450.9030? This is the Tomtom "authorized" version that will allow access to TT Home, etc. Thanks.
Where You find this news about TTN 7.450.9030.
Please, more info...

Hi

her http://www.ipmart-forum.com/showpost.php?p=2178148&postcount=394

Where You find this news about TTN 7.450.9030.
Please, more info...

http://rapidshare.com/files/134818600/7.450.9030_map_patched.rar.html

http://rapidshare.com/files/134818600/7.450.9030_map_patched.rar.html

I tried to install TT 7.450.9030 on my Sprint HTC Touch, but I got "Not compatible with this device" error. Any help?

I tried to install TT 7.450.9030 on my Sprint HTC Touch, but I got "Not compatible with this device" error. Any help?

The same error htc P3600 :|

just get a ttgo.bif and a ttsystem from one of the packages for stand alone tomtom and copy the to the root of the SD card of the PDA, then TTHome is able to "see" it and update the components as needed (of course you could edit the ttgo.bif file to what you like better)

just get a ttgo.bif and a ttsystem from one of the packages for stand alone tomtom and copy the to the root of the SD card of the PDA, then TTHome is able to "see" it and update the components as needed (of course you could edit the ttgo.bif file to what you like better)

I had that idea. Nope. All I'm getting is the QuickGPSfix, and that's actually counterproductive with an external GPS receiver. I'm beginning to suspect that mapshare data is not available for North America for this kind of installation, possibly because TT7 PDAs aren't sold here. (speculation)

just get a ttgo.bif and a ttsystem from one of the packages for stand alone tomtom and copy the to the root of the SD card of the PDA, then TTHome is able to "see" it and update the components as needed (of course you could edit the ttgo.bif file to what you like better)

Hi
a ttgo.bif and a ttsystem on a PPC :confused:

Hi
a ttgo.bif and a ttsystem on a PPC :confused:

Just to make Tomtom Home think a One or Go is connected and update the maps. You can also add or remove voices and icons and stuff that way.

I still can't get any maps to show up - I've tried SDMMC/Maps/Australia and SDMMC/Australia... any help?

I had that idea. Nope. All I'm getting is the QuickGPSfix, and that's actually counterproductive with an external GPS receiver. I'm beginning to suspect that mapshare data is not available for North America for this kind of installation, possibly because TT7 PDAs aren't sold here. (speculation)


I have a RX5915 with 2G internal loaded with NA 720.1803 that TThome will not see. I just set up a separate 2G SD card as quoted in the 'Mapshare how to' posts. I update the SD card (now over 11K updates) then copy the four updated files to my unit.

right chaps,

here comes 7.450.9030 unlocked for QVGA phones. (by Shoora // 4pda.ru)

1. install 7.450.9030 to your phone
2. copy TomTom navigator.exe from attached zip file to navigator folder installed on your phone overwriting existing file.

original 7.450.9030 installation cab file is available in this thread.

cheers!

Hi guys first post.
Maybe I'm being stupid but I cant get tt7 to recognise the maps i copy onto the SD card. i'm using tt7.450.9028 and an hp ipaq hx2490b.
the map i'm using is western europe 7.20
Any help??

hi, im looking for tt7 maps for south africa. i was using tt6 and worked fine but now my maps dont work with tt7. is there a software that can convert tt6 maps to tt7.
please advise.

thanks

hi its 4 and HTC p3300

is there any cracked version which allows to install nav7 on not supported devices ?

@freednd

what's is wrong with this one here?

http://www.ipmart-forum.com/showpost.php?p=2183551&postcount=56

i cant install the .cab file on my ETEN G500
install returns error that my device is not supported

check for navigator folder contents on your phone. usual location: Internal storage folder.

if TT7 is installed, then overwrite tomtom navigator.exe file with the patched one.

else, you can unpack contents of cab file by hand and transfer them over to phone.

Are all the 720 maps the same or are some cracked ? Do I need a guam-like map like for previous versions ?


edit: also, what about TTS voices, can those work ?

anyone has the full install cab for 9030?
rs deleted ;(

double ... deleted

anyone has the full install cab for 9030?
rs deleted ;(
May be you have any TomTom6/7 version installed on your device? Then u don't need full installation - just "lazy" one:hehe:

Hi,

works well on a TyTn II !:thanks:

Once you have copied your files to your PDA, don't forget to switch to new map in Tomtom options.

saw the mapshare link in the other thread and I don't have a SD to devote to TT only. I see where others were able to copy a file they had from another tomtom they apparently had. Any way to make it connect to Home for us that only have the repack?

did anybody had the problem of the bluetooth no longer working after the TT7 installation?

How to update the map with the TOMTOM HOME 2 using Navcore 7.450.9028?

The TT H 2 does not see the TT 7 of the PDA (HTC Diamond)

How to update the map with the TOMTOM HOME 2 using Navcore 7.450.9028?

The TT H 2 does not see the TT 7 of the PDA (HTC Diamond)

You must download the one for Navigator I believe back on TT's webpage. (ver 1.5 it is I think)

Incorrect. TT home 2.x has to be used for Diamond phone.
For map share updates to work move entire Navigator folder out of internal storage to \program files in device root. leave maps on internal storage.
when connected to TT home, choose installation located on Internal storage. it works that way for everybody. make sure that map share option is enabled in TT7.

You must download the one for Navigator I believe back on TT's webpage. (ver 1.5 it is I think)

Hi Guys
I've problem with Navroad NR 430BT, TT 7 works fine (GPS signal, maps etcx.) but after few minutes of working navigation, there is windows window on full screen with lines "debug...." then when I pressed "X", window is closed and TT7 work again. This happend each time when I start navi. Maybe someone of You nnoticed similar problem?

cheers

hello,

I have install "TT_Nav_7.450.9028_repack3-qvga-blue.cab.zip "on Naman S70 and I have a message " Not enough memory to start" .
It is windows CE 5.0.
If somebody have an idea.

i have ipaq 914c tomtom7 loaded fine but it tells me there is no gps device

any ideas to get it to work

in tt-menue for gps settings choose "OTHER NMEA-RECEIVER"

tks working great

Hi,

Anybody managed to set up a connection between an E-Ten X500+ (Glofiish) and TomTom Home 2? I have tried with official ROM, custom WM 6.1 ROM (Mixxed 2.3), with Navigator versions 7.450 and 7.910, but Home 2 does not recognize the device. I have bought a map at www.tomtom.com and I want to download it using the device code from my X500+, using the TomTom.com account that is attached to my PDA and that I have used to buy the map.

When I move the SDCard to a card reader and add the files from my wife's TomTom ONE, TomTom Home detects it, but then it thinks that a TomTom ONE is connected, with a different device code, attached to a different account on TomTom.com. Therefore I cannot download the map that I have bought using my own account.

I also tried to patch ttHome.jar (2 functions in ttNavItem.js) but this didn't help in TomTom Home 2 recognizing the X500+ as a device.

What does work is changing the version of my old Navigator 6.60 map to 6.75. This allows me to use that map with Navigator 7 and with Traffic information. However, I have been unable to download the map I have bought and when I use an "unofficial" map, Navigator 7 immediately detects an incorrect activation when connection is made with the TomTom traffic server.

Any suggestions are kindly appreciated!
Edwin.

I had audio/ voice problems with my Tomtom Navigator7: It is a bluetooth issue:
search piratebay torrents for tomtomfixed. Now my HP Ipaq hw6500 works fine with TT7 9028.