Garmin Mobile XT for Windows CE v5.00.20w

[Only registered and activated users can see links]

Requirements: Windows CE v4.2 or Windows CE v5.0 or Windows CE v6.0, 16MB program memory.
Overview: This is Garmin Mobile XT for Windows Mobile v5.00.20w cracked to work under Windows CE. I have also included a script that does the following:
1. Renames coredl2.dll depending on the Windows CE version
2. Configures/runs Port Splitter
3. Runs explorer
4. Hides the taskbar
5. Loads Garmin settings
6. Runs Garmin Mobile XT
7. Saves Garmin settings
8. Safely stops and exits Port Splitter

More Info:
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Download Instructions:
Download all in one package:
[Only registered and activated users can see links]

Troubleshooting:
Edit Garmin\RunGMXT\Garmin.mscr to enable/disable PortSplitter.
Delete Garmin\RunGMXT\Settings.dat to reconfigure PortSplitter.

Updates:
Now it should run on any Windows CE device (4.2, 5.0, or 6.0). Just run Garmin\RunGMXT\Garmin.exe.

Old versions:
Garmin Mobile XT for Windows CE v5.00.10w
[Only registered and activated users can see links]

where should i paste the script i download from [Only registered and activated users can see links] can u show how the file put?
i try to use it but no work :] can 1 by 1 step teach me? thx

Thanks it works very well. By the way GarminMobileXTforWindowsMobile_50020w is out. Could you please upgrade your crack to this version? [Only registered and activated users can see links] ([Only registered and activated users can see links])

First post updated with the latest version. Enjoy!

First post updated with the latest version. Enjoy!

Thread title updated too for those who are interesting being easier to find. Great share, repp+

Hello! I have a Medion Windows CE 4.2 device. How do I install this garmin app??

POST A HOW-TO-INSTALL-TUTORIAL PLZ

Anyone got this working?? please tell me how..

Anyone got this working?? please tell me how..
take this

[Only registered and activated users can see links]
it is for Win CE 4.2
Just copy it on root of SD card.
run Que.exe
I assume that you know How to ....maps,aplication and etc. -if not => read

i got the 5.00.20 working with 2008 maps.. didnt try the 2009 yet. im not sure did i get the gps-unit of my medion mdpna 240 to work, but im figuring it out.. nice app!! repute +

Everytime I start Garmin, the audio level is at 60 % . Even if I change it to 100 % and exit, it doesn't save the setting and returns to 60 % level on next start. Does anyone know anything about saving audio setting level or fixing to 80 or 100 %? (I have Mio C520)

i would like to ask is there any chance to get garmin mobile xt working on MEDION MDPPC200? I have installed program, maps, unlocked everything, but i am not able to connect it to external gps, that is connected on serial port (COM1). Garmin application recognises that something is connected on that serial port, but cannot get gps data. Is there any chance to make it work on that type of PPC.

Thanks for the answer!
Regards, Daniel

Im very interesting about install it's on windows CE 4.2.. Have anyone try install on Mio C510..? Thanks

Does it work at widows mobile 6.1?

I already try the tutorial and it's working on MIO c510..but can't communicate with build-in
GPS receiver..maybe ill need to unlock the code.. can some one have the unlock key.. please.. thanks.

Karagiosis you 've made a good job

But i still have a couple of questions

1) I have a RYE 3503 (wince 4.2) and i can not save my settings no matter what i do. I suppose i'm doing something wrong. Is it possible for youto upload a user guide?

2) The show/hide/toggle tool bar do nothing on my device. Any ideas?

Is it possible to make another exe file that simply copies the files from a location (e.g. e:\garmin\settings) to "my computer\garmin\" and after that run garmin. If you make the settings the first time,then manual copy them to the above location the problems are solved quite easily (I imagine).

Keep up the good work :wave:

I use the program with a navigon 2100max everything is ok except the gps signal the program cannot find gps can anyone tell me what i'm doing wrong? thanks in advance

I installed Garmin Xt in 7 inch widescreen WinCE 5.0. All is working well after renaming the image file. Trip meter and odo meter are not properly displayed specially the Speedo meter and odometer. Do I have to rename some other file also. Average maximum time etc working but speedo meter not working and not properly displayed. It shows up half screen and has no numbers.

anybody got this working in a mio moov 310?

would appreciate a "how to" a great deal!

rgds,
asmd6230.

Hello
I already downloaded all this file:

Download:

Option 1:
Download all in one package from one of the following mirrors:

Code:
[Only registered and activated users can see links]
[Only registered and activated users can see links]

What else do i have to download and put in my card?
My device run with WINDOWS CE 5.0.

Please help. I had Garmin XT previous installed for my Wince 5 pna. I used other software in between, and now, when I put the SD card in, XT wont start anymore. It goes to the 1st screen, asking to connect to an other gps system only. When I click on that it goes back to explorer. What to do? My Shell registry settings:

[HKEY_LOCAL_MACHINE\System\Explorer\txt]
"My Documents"="\\Storage Card"
"Application Data"="\\Application Data"
"Desktop"="\\Windows\\Desktop"
"Favorites"="\\Windows\\Favorites"
"Fonts"="\\Windows\\Fonts"
"Program Files"="\\Program Files"
"Programs"="\\Windows\\Programs"
"Recent"="\\Windows\\Recent"
"StartUp"="\\Windows\\StartUp"
"Windows"="\\Windows"

Thanks in advance.

Hi i have one jensen nav101 navigator this have wince 4.2 y try install the garmin and dont working this say que.exe is not valid wince aplication, y chnage dll more times and dond working... please help me.

There is no point to dowload this. I get the program working on my friend's wince4.2 system but it cant find the GPS no matter what.. And some times the garmin crashes and reporting a memory issue...

I installed a MioPocket software to my friend's Medion Pna device and Navigon 6 with full europe maps and it works nice. i can recommend it to anyone that has a device that supports miopocket.

This work my Win CE 5.0 but I can't Crack it

Hi, can someone help me pls?
My unit (WinCe 5) wont recognize my sd card anymore after a restore with "Pocket Controller Pro". Does someone has a solution about what to add/change at the registry? Thanks so much.

Where do I get the POI for North America? I don't see any pre-installed *.gpi files. All I get is a prompt that says Delete Location? I press ok then it brings me back. When I go: Where to?> Points of Interest

I can go to Extras and use the custom POI's I made but I would like the default ones from factory too.

Edit: Not only did I need the Garmin XT North America NT 2009 maps, I also needed the 1GB gmapsupp.img for that map set. Everything works now. :good2:

YES!!!!....YES!!!!

after so many hardwork...

today i finally got my china cheap GPS 4.3' installed with this GARMIN!!!!!!!

thanks!!!!!!

Hi!

How do I make GarminMobile (its working fine) as my default program? When I start my Becker navigation it always start Becker Traffic Assist.

on mio moov 330, is it working ?

I copied all the files as listed on 1rst thread, and then I run which file?????

do i need to run the garmin.mscr first ?

or the apps/wm/que.exe ?

any hints ?
thks

on mio moov 330, is it working ?

I copied all the files as listed on 1rst thread, and then I run which file?????

do i need to run the garmin.mscr first ?

or the apps/wm/que.exe ?

any hints ?
thks

ok.. i manage to run the .20 version.. but how does the registration works ?
I get the message that GPS can not be found, therefore i guess the registration is similar but not the same with PDAs.

I have the same program working on my omnia and cracking is simple with the keygen1.5.

on the mio moov 330, when I go to the about page to get the device id, i can see two IDs.. lol...

device id
and
card id

of course those are in greek words. but which one of the two i use for the sw.unl file ? and for the gxxxxx.unl file for the maps ???

thks for the support in advance..
:thanks:

Use Device ID.

minimum words? WHat the hell?

YES!!!!....YES!!!!

after so many hardwork...

today i finally got my china cheap GPS 4.3' installed with this GARMIN!!!!!!!

thanks!!!!!!

that's great, evangelism!! appreciate it if you can list the steps you took to make it work for all of us who are still struggling:confused:

thanx!

ok.. i manage to run the .20 version.. but how does the registration works ?
I get the message that GPS can not be found, therefore i guess the registration is similar but not the same with PDAs.

I have the same program working on my omnia and cracking is simple with the keygen1.5.

on the mio moov 330, when I go to the about page to get the device id, i can see two IDs.. lol...

device id
and
card id

of course those are in greek words. but which one of the two i use for the sw.unl file ? and for the gxxxxx.unl file for the maps ???

thks for the support in advance..
:thanks:

solved.. garmin works on my mio330 also thks..

- unzip 5.0.10 files garmin folder
- unzip 5.0.10 files dlls WM folder
- unzip 5.0.10 files mscr scripts folder
- unzip 5.0.20 files wm folder

then go inside the mscr folder, where there are some files like
taskmanagerhide
portspliter.exe
garmin.exe
garmin.mscr

and then execute the garmin.EXE file.

finally the GPS is now detected..... (my keys where ok from the begining, its not clear which file u need to execute on the end, a comment on that could be added on the first post).

:thanks:

thanks.but i have a problem.i have unlock maps and software but it can not find any gps antenna.i have mio c520.on yours mio which port have you select?

Could you share more about how you installed? I tried to install it on moov 500. no success. I couldn't find the mscr folder. only RunGMXT folder. should I need to rename it to mscr?
Thanks,


solved.. garmin works on my mio330 also thks..

- unzip 5.0.10 files garmin folder
- unzip 5.0.10 files dlls WM folder
- unzip 5.0.10 files mscr scripts folder
- unzip 5.0.20 files wm folder

then go inside the mscr folder, where there are some files like
taskmanagerhide
portspliter.exe
garmin.exe
garmin.mscr

and then execute the garmin.EXE file.

finally the GPS is now detected..... (my keys where ok from the begining, its not clear which file u need to execute on the end, a comment on that could be added on the first post).

:thanks:

Could you share more about how you installed? I tried to install it on moov 500. no success. I couldn't find the mscr folder. only RunGMXT folder. should I need to rename it to mscr?
Thanks,

Inside this RunGMXT folder u should run the garmin.exe file...
and then the Garmin runs and the GPS works..

The GPS should be autodetected by garmin program.
If garmin asks you to retry the searching of the GPS device, then it will not work, something is not done as needed.

Thank you, septlc. when I run the garmin.exe, there was an error message. "A buffer overrun has been detected which has corrupted the program's internal state. the program cannot safely continue execution and must now be terminated" program: port splitter.exe.

What should I do now? Could you upload your garmin folder without the map file?
Thanks again.

Hi,
anyone here got their Holux gpsmile 55 to work?
Run the garmin script nothing happens, don't
know what's wrong. Please help.

:urtheman:

Has someone fix this problem?

[Only registered and activated users can see links]

I have the same minor problem with ekolab.
This GMXT was successfuly installed to my Mio C320 and run smoothly.
Renaming QueBmp320.dll to QueBmp240.dll only solve the vertical display problem, the right side problem remains unsolved.

Any suggestion?

Thanks.

I have the same minor problem with ekolab.
This GMXT was successfuly installed to my Mio C320 and run smoothly.
Renaming QueBmp320.dll to QueBmp240.dll only solve the vertical display problem, the right side problem remains unsolved.

Any suggestion?

Thanks.

same here... i solved it by using igo :)

Does this means this problem is unsolved?? Come on mates try to solve it, i dont know how??

Hi,
anyone here got their Holux gpsmile 55 to work?
Run the garmin script nothing happens, don't
know what's wrong. Please help.

:urtheman:

I have the same problem. When I run garmin.exe nothing happens.
Did everything by the book....

Thank you!

Dejan

have someone instal to navman s50 unlock ? have instal that but not work.. anyone can help me please...?

Thank You

I have a problem in the rute page, i can´t see the distance (large) of the route, somebody happens this? :punish:

regards

I have a problem with this program. when i executed garmin.exe there is an error message "procexist requires toolhelp.dll on your device. line 20 (\sdmmc card\garmin\rungmxt\garmin.mscr"

how can i solved this problem?

Hi
Thank you for the application I put in my car turning GPS s / WIN CE. NET 4.2
the connection settings I change the language and map the remaining parameters.
In reignition, it is the first start menu and all my settings lost.
Garmin starts directly from the SD card.
Is it a file or Garmin, store settings?
in any case it is not at all practical to spend 5 minutes to redo the settings.
Thank you for your help

Excuse my English, I spend a taducteur

Hi
Thank you for the application I put in my car turning GPS s / WIN CE. NET 4.2
the connection settings I change the language and map the remaining parameters.
In reignition, it is the first start menu and all my settings lost.
Garmin starts directly from the SD card.
Is it a file or Garmin, store settings?
in any case it is not at all practical to spend 5 minutes to redo the settings.
Thank you for your help

Excuse my English, I spend a taducteur

In Garmin/RunGMXT/Garmin.mscr you must have this changed lines:

#Save new settings back to SD Card
XCopy("\Garmin\*.*","\Storage Card\Garmin\RunGMXT\Settings", TRUE)

This way Garmin will save your settings to memory card. Enjoy.

I have a problem with this program. when i executed garmin.exe there is an error message "procexist requires toolhelp.dll on your device. line 20 (\sdmmc card\garmin\rungmxt\garmin.mscr): if(not procexists("port splitter.exe"))"

anyone can help me?

Can someone upload his working version for Moov 360?
Thank you!

i also get the error with toolhelp.dll. where must this dll be put? i downloaded it but i dont know where to put it...

also, the port splitter included here, is only for ce 5.0
it does not work on win ce 4.2

Hi guys, I'm using a Taiwan-build PNA (Marbella M5010) and I'm keen to install garmin into it. However I can't seem to load Win explorer or taskbar. Any ways to look into it? Btw, It's running on Win CE 5.0

In Garmin/RunGMXT/Garmin.mscr you must have this changed lines:

#Save new settings back to SD Card
XCopy("\Garmin\*.*","\Storage Card\Garmin\RunGMXT\Settings", TRUE)
Hi i tried that in a car entertainment navigation system and it's working when exit from garmin but when i switch off the key i loose all settings. there is no file in settings folder.

has anyone gotten this to work on a mio c310x?

I put everything on an SD card, renamed coredl2.dll file as described in first post. then ran garmin.exe and nothing happened.

Please help with step by step.

I have a problem with this program. when i executed garmin.exe there is an error message "procexist requires toolhelp.dll on your device. line 20 (\sdmmc card\garmin\rungmxt\garmin.mscr): if(not procexists("port splitter.exe"))"

anyone can help me?

I have exactly the same error message when trying to run it on my Transonic 4000 bought with Navigon 5 onboard and now running with iGO8 run from SD card. Three of us have had the same problem. Any help to resolve this would be most appreciated.

@Biosphere

when you connect your pna to the computer, can you see the .exe file oyour nav software. if you can, rename your nav .exe file as something else (after backing up the file first). then reneme the attached explorer.exe file as your original nav .exe. reset your device. it should take you to desktop.

also, the port splitter included here, is only for ce 5.0
it does not work on win ce 4.2

so that's why i couldn't get this to work on mio c310x. I deleted the port splitter settings and now it works. So on a wince 4.2 device, how do you tell garmin where your GPS is w/o port splitter?

nevermind, it looks like its automatic once you unlock the software.

Hi
Did enyone make it work on MIO C220 ?????
If yes , then please post as more details as posible on how to do this .

I have extracted everything the rar file had ( Option 1 ) on an SD card , put SD card on my MIO C220 , but if i try to run Garmin.exe from the folder RunGMXT it seems to start the aplication just for a blink of a second and then ......... nothing .

Please help !!!!

Note that MIO C220 is unlocked and allready running MIOMAP 3.3 , iGO 8 , Destinator 7 .

Hi

Big problems with this version, no way to recover the traces and WPT.

Files are saved in. NVM, and no way to recover except for the active track (GARMIN_ATRK.NVM) which can be in conversation. Gpx mapsource compatible.
Here: [Only registered and activated users can see links]

Have you a solution?

Other concerns, the odometer does not work in the upper part.

@Biosphere

when you connect your pna to the computer, can you see the .exe file oyour nav software. if you can, rename your nav .exe file as something else (after backing up the file first). then reneme the attached explorer.exe file as your original nav .exe. reset your device. it should take you to desktop.

Thanks for the advice. Managed to load desktop however it auto-hides under my navigating main page. How do i disable that?

try touching the bottom edge of the screen. the taskbar should appear. then 'start'--'setting'--'taskbar'; uncheck 'autohide taskbar'.

that's what i did and it worked for me.:nod:

try touching the bottom edge of the screen. the taskbar should appear. then 'start'--'setting'--'taskbar'; uncheck 'autohide taskbar'.

that's what i did and it worked for me.:nod:

Thanks again for the reply. Can't work either. Any other ways to unlock?

Thanks again for the reply. Can't work either. Any other ways to unlock?

you can try this. unzip the attached file to your sd card. open the file. you should see a thin grey line along the bottom edge of the pna's screen. that should be the taskbar 'autohiding'. then do as previously instructed. if this doesn't work, then i am stumped!:sorry: good luck!

solved.. garmin works on my mio330 also thks..

- unzip 5.0.10 files garmin folder
- unzip 5.0.10 files dlls WM folder
- unzip 5.0.10 files mscr scripts folder
- unzip 5.0.20 files wm folder

then go inside the mscr folder, where there are some files like
taskmanagerhide
portspliter.exe
garmin.exe
garmin.mscr

and then execute the garmin.EXE file.

finally the GPS is now detected..... (my keys where ok from the begining, its not clear which file u need to execute on the end, a comment on that could be added on the first post).

:thanks:

do you use portsplitter for fixing? :thanks:

I install GMXT in MIO C230, but have a problem. I don´t find how to export the track. I can´t find the menu to export it.

Many thanks, Aníbal.

Hi there! I have done the steps needed to install garmin mobile XT for windows CE v5.00.20w and v5.00.10w both but its not working for me.

I have mio moov500. The error I am getting is that "Que is not a valid windows CE application". I am running windows CE 5.00.

Any ideas?

thanks in advance.

Hi Everyone! I'm trying to get to my desktop too, but I not sure with file should I replace with the ceDesktop.exe that was previously posted on this threat. When I use ActiveSync on my gps with windows ce 5.0 I see a shortcut to control panel and some empty folders, and a windows folders with a bunch of files. Is the .exe that I need to replace on windows folder or I completely lost?
Thanks!

i live in india having a 4.2 ce pnd i will download but how to install india maps

any solution to solve that unable to display last item in my location

has anyone gotten this to work on a mio c310x?

I put everything on an SD card, renamed coredl2.dll file as described in first post. then ran garmin.exe and nothing happened.

Please help with step by step.


Hi there, same with me, I tried both the all in one version and the component version but after both installation and executing garmin.exe it blinks for less then a second and nothing happen.

I'm using Mio digiwalker C320 which has the navman software, miopocket 2.0 release 45.

I reboot and tried to run only port splitter.exe and on the output port, there is nothing to choose from therefore can not start splitting. So I guess the portsplitter is not working.

Reboot again and tried to just execute que.exe, nothing at all.

I have also tried various garmin CE setup from other sources and all about same result.

Did I miss something here?

I desperately need garmin as I also use Bluechart often.


Any clue?

please any fix for pna 480x272?

Hi Everyone! I'm trying to get to my desktop too, but I not sure with file should I replace with the ceDesktop.exe that was previously posted on this threat. When I use ActiveSync on my gps with windows ce 5.0 I see a shortcut to control panel and some empty folders, and a windows folders with a bunch of files. Is the .exe that I need to replace on windows folder or I completely lost?
Thanks!

@mrbip,

find out which .exe file runs your nav software via activesync. back it up and then replace with the explorer.exe file.

Maybe one of the "techies" out there can also help me. I have a Route 66 Chicago 6000 which runs on Windows CE 5.0. Just after I purchased this unit I was told that it was discontinued and the maps will not be updated anymore! I now would like to install Garmin Mobile XT on it, but I am not having any sucess. I downloaded all the necessary files and copied the files onto the SD card. If I then tap on any of the exe files in the Garmin folder, I only get error messages that it is not a valid CE application. If I tap on the script files, I get an error message that it cannot find a DLL file, but the file is in that folder. I am really stumped with this one. Any help will be sincerely appreciated.

HI everyone..

i just bought nokia 330 with map king bundle as map.

and now, i just want to switch my map into garmin..

i've just follow those instruction by extract those files into my SD card.
but, my device not recognize the new SD card.

Windows CE is not displayed for this device, it's only like application with 4 options: Navigation, MP3, Photo, Movie and setup.

How can i switch it into WINDOWS CE display? so i can run my Garmin..
thanks ^^

regard,

LepasMalam

i have a problem, i have a chinese 2 din car stereo, now i have loaded all the cracked dll's and so on, that includes the sw.unl and gmapsupp.unl, when i launch it, it comes up with a screen that has a selection of "purchase" , "unlock" and so on, it almost seems like i need an internet connection, when i go to the "enter code", it keeps asking for an 8 digit code, now i know that if this is not cracked properly no gps signal will be found, so for some of you that wonder why it is NOT connecting, it is because of this, so, either can someone kindly upload there sd card files with no maps (otherwise too large ). please note the system i have, it is a 7 inch car stereo, running wince5 and a touchscreen type, i have igo r3, tomtom, polnav and route66 running no probs, but i love my garmin.

thanking you.

hi viper,
i have the same car entertainment system you have.
how did you get tomtom working right? mine freezes all the time.
i would appereciate your help.
also i am wondering if this garmin software would work.:urtheman:

hi viper,
i have the same car entertainment system you have.
how did you get tomtom working right? mine freezes all the time.
i would appereciate your help.
also i am wondering if this garmin software would work.:urtheman:

hey mate, well i actually got an sd card that came with it, and it had tomtom, igo, plonav, mobile navigator and route 66, trust me dextersj, igo is by far the best, with many features followed by garmin. garmin although might be slow to draw it's maps, but it's features are good, there is plenty here to download, not sure if i can upload the file without the map of course, i have tried to attach it here, hope it works, just download the right map for yourself, i have the aussie maps only.

o.k dex, i have done it, got garmin going, go to the links to garmin website, download garminxt 5.00.20 files with basemap and support files, use the jetmouse keygen to create an sw.unl file using notepad, make sure you use the card id and NOT the device id and generate, note, when saving make sure there is no "txt" at the end, in other words, it must not be like this " sw.unl.txt" but "sw.unl". here's where i found out the other problem, the maps should be named gmapprom.img and NOT gmapsupp, once done all working, but you know what?, igo r3 is the best now that i have this going.:goodluck:

cheers.:egdance:

hey mate, well i actually got an sd card that came with it, and it had tomtom, igo, plonav, mobile navigator and route 66, trust me dextersj, igo is by far the best, with many features followed by garmin. garmin although might be slow to draw it's maps, but it's features are good, there is plenty here to download, not sure if i can upload the file without the map of course, i have tried to attach it here, hope it works, just download the right map for yourself, i have the aussie maps only.

o.k dex, i have done it, got garmin going, go to the links to garmin website, download garminxt 5.00.20 files with basemap and support files, use the jetmouse keygen to create an sw.unl file using notepad, make sure you use the card id and NOT the device id and generate, note, when saving make sure there is no "txt" at the end, in other words, it must not be like this " sw.unl.txt" but "sw.unl". here's where i found out the other problem, the maps should be named gmapprom.img and NOT gmapsupp, once done all working, but you know what?, igo r3 is the best now that i have this going.:goodluck:

cheers.:egdance:

Bro, can you pls kindly advise me if i need to pay in order to activate this? I'm stuck at the product code. Where should i save the sw.unl file? Thank you.

Bro, can you pls kindly advise me if i need to pay in order to activate this? I'm stuck at the product code. Where should i save the sw.unl file? Thank you.

hi buffy, the sw.unl file should be in your garmin folder, that is when you open it, it should be there along with the maps and sub-folder, if no map found, then rename your map from " gmapsupp" to "gmapprom", no need to change the sw.unl, also, after getting garmin going, i find that igo r3 is sooooo much better by far, quicker map draw and much more features on screen, take my advice, use igo r3.:thanks:

Will these instructions work for install GMXT 4.x? I don't like how the "Ready to Navigate" bar is now a solid color vs. on version 4.x

This install will probably go onto a 7" chinese based double din car radio on wince 5.0

[Only registered and activated users can see links]
^^^^^^Version 5.x^^^^^^

[Only registered and activated users can see links]
^^^^^^Version 4.x^^^^^^

@SUPERX10

this does work, but as usual, garmin is so slow in drawing the map, so i have reverted back to igo8 r3, which is so much faster and much better settings with 3d buildings, forget it folks, it's the same old thing, it depends on your prefernce.

Works fine on a no name gps 5" 480x272 with Windows CE v5.0 :egdance:

Thanks a lot. :urtheman:

When I start the apps, it ask for product serial number. what do I do?

Did anyone tried on MIO C220 ?

Works fine on a no name gps 5" 480x272 with Windows CE v5.0 :egdance:

Thanks a lot. :urtheman:

Dear friend,
Mind to show me step by step to install? I try so many time, still fail.
Garmin Software still ask only for garmin device when i try on the gps signal.

Hope u can upload some pic.
.Im also using 5" no name gps,

Thanks

Edited
I just notice why some people can't crack like me.

Some people are confuse about Device ID & Card ID.
My Software dont have Card ID, But only Device ID and I believe some
people have same device ID 17826272.

Im also not sure why this software not stated Card ID. Anyone can help how to do trick or any tips so i will available to see my card ID.

Thanks

Does it works with 480x234 resolution?

how do i know my gps run on windows ce ver5.0 or windows ce ver 4.2???

thanks

Hi, guys, I am new here.

I have integrated car navigation (WD6050) which runs ce 5.0. I managed to put Gramin XT to SD card and also generate SW.UNL in Garmin folder, but I still have first screen to enter activation code or use garmin GPS device, like it does't detect unlock code. Do you have any idea what could be wrong?

Hi,

at the end I find out that I was using device code instead of card code. Now it's working perfect.

:thanks:

I have a chinese gps running on Win Ce 5.0 5" but could not run this app. Tried eveything w/o luck.

Dear friend,
Mind to show me step by step to install? I try so many time, still fail.
Garmin Software still ask only for garmin device when i try on the gps signal.

Hope u can upload some pic.
.Im also using 5" no name gps,

Thanks

Edited
I just notice why some people can't crack like me.

Some people are confuse about Device ID & Card ID.
My Software dont have Card ID, But only Device ID and I believe some
people have same device ID 17826272.

Im also not sure why this software not stated Card ID. Anyone can help how to do trick or any tips so i will available to see my card ID.

Thanks

Run Garmin, go to tools -> settings -> About

You will see Device ID & Card ID.

It's the Card ID that you need.

@hairul

device id & card id is basically visible on mobile phone editions not on pna's.

for pnd u'll find the software id.. which can also be used to unlock the device.
use jetmouse keygen & choose mobile xt version. .enter the software id & u'll get the unlock code,
save it as sw.unl

Run Garmin, go to tools -> settings -> About

You will see Device ID & Card ID.

It's the Card ID that you need.


@hairul

device id & card id is basically visible on mobile phone editions not on pna's.

for pnd u'll find the software id.. which can also be used to unlock the device.
use jetmouse keygen & choose mobile xt version. .enter the software id & u'll get the unlock code,
save it as sw.unl

Already try unlock Device ID using more than 5 different code. Seems all fails.
At Setting > About... Only display Device ID (8 Digit), and Dont have Card ID or Software ID (10 Digit).

Already try unlock Device ID using more than 5 different code. Seems all fails.
At Setting > About... Only display Device ID (8 Digit), and Dont have Card ID or Software ID (10 Digit).

Do you have access to Garmin Nuvi GPSr - check with your friends/family/neighbours? If yes, put your SD or micro SD card into the Nuvi unit, and go into the diagnostics mode (for nuvi 200 - press and hold the battery icon until the diag mode is started, search for procedures for other model), browse through the pages for device ID. That's how I got my device ID. If no, sorry - can't help as I don't know (or didn't research) how to get it without the Nuvi GPSr.

@hairul

install garmin in root of storage card i.e Storage Card/Garmin
it will work fine...

anyways, attaching the working edition of garmin on my mio, works perfect with correct port splitter settings & morstcript.

just unrar & place the folder in root.

start garmin from Garmin/RunGMXT/Garmin.exe

[Only registered and activated users can see links]

Do you have access to Garmin Nuvi GPSr - check with your friends/family/neighbours? If yes, put your SD or micro SD card into the Nuvi unit, and go into the diagnostics mode (for nuvi 200 - press and hold the battery icon until the diag mode is started, search for procedures for other model), browse through the pages for device ID. That's how I got my device ID. If no, sorry - can't help as I don't know (or didn't research) how to get it without the Nuvi GPSr.

This the only the last method i think so far since im install this since 1 month ago.For this moment, i only have 1 friend that have this garmin nuvi pna, but he live far from my house. im only gonna visit him for next month. so will try later.

@hairul

install garmin in root of storage card i.e Storage Card/Garmin
it will work fine...

anyways, attaching the working edition of garmin on my mio, works perfect with correct port splitter settings & morstcript.

just unrar & place the folder in root.

start garmin from Garmin/RunGMXT/Garmin.exe

[Only registered and activated users can see links]

I will download later cause my office cannot use rapidshare. But maybe cant work because ur Card ID & My ID are different, even we have same software. but i will try and give any feed back.

its the full software with correct settings for mortscipt, working on wince devices.
not like .. the one u r assuming.. run the exe u'll get the software id to unlock.

Hi,
Already install but unable to crack. Still same like b4.
BTW, i manage to get Thai Version (No Need Crack) and change to english font.

Only unable to locate GPS signal.

HI All,

Any solution for 480x272 display?

What solution it is? If Bug/Alignment on Display , still havent resolve for crack version.

Download from link below

Garmin Mobile XT 5.00.20w + keygen + theHijacker.mscr (compatible with 480x272)
[Only registered and activated users can see links]

Garmin Vehicles (All)
[Only registered and activated users can see links]

Download from link below

Garmin Mobile XT 5.00.20w + keygen + theHijacker.mscr (compatible with 480x272)
[Only registered and activated users can see links]

Garmin Vehicles (All)
[Only registered and activated users can see links]



:thanks:

nice .mscr scripts....still waiting solution for display right side problem.

Does it works with 480x234 resolution?

It does on mine BUT I cannot see any satellites :suicide:

Bazzle

Edit: Needed the JNKG 1.5 patch mentioned below

Mmm... Im still unable to connect. Still Not Found Internal GPS Device.
I gonna visit my friend This week. He got Garmin PND. The last resort.

In Garmin/RunGMXT/Garmin.mscr you must have this changed lines:

#Save new settings back to SD Card
XCopy("\Garmin\*.*","\Storage Card\Garmin\RunGMXT\Settings", TRUE)

This way Garmin will save your settings to memory card. Enjoy.

-------------------------------------------------

REMOVE gap in Storage Card.

Change to StorageCard

Bazzle :nod:

Mmm... Im still unable to connect. Still Not Found Internal GPS Device.
I gonna visit my friend This week. He got Garmin PND. The last resort.

Does it go straight into Garmin Caution screen or the screen where it asks for licence etc?

Mine didnt work until i ran JMKG 1.5 final and put in sd card number.

Bazzle

Does it go straight into Garmin Caution screen or the screen where it asks for licence etc?

Mine didnt work until i ran JMKG 1.5 final and put in sd card number.

Bazzle

Im using Thai Version (ASN). No any warning (4 Option).
I try mayy time latest JMKG.. still no luck to find internal gps

Im using Thai Version (ASN). No any warning (4 Option).
I try mayy time latest JMKG.. still no luck to find internal gps

Did you run the Port Splitter program?
If not have a play with setting?

If you did remove file from card maybe?

Bazzle

Did you run the Port Splitter program?
If not have a play with setting?

If you did remove file from card maybe?

Bazzle

Port splitter Running well, no missing file cause all garmin file are fresh download.

Hi every body
sorry for my english.
i have 7inch dvd player all in one with gps inside.
i want to install garmin xt can you tel me step by step how to do cuz i tried to copy dowloaded folder named Garmin from her
[Only registered and activated users can see links]
the program want to start and i can se garmin for a second and no more idont understand too much about how to use the script and how to change mscr file inside RunGMXT.
i hope somone can help please cuz i treid too to install tomtom but the voice sounds not workin properly and it is freezing every second.
thanks for advanc


I installed Garmin Xt in 7 inch widescreen WinCE 5.0. All is working well after renaming the image file. Trip meter and odo meter are not properly displayed specially the Speedo meter and odometer. Do I have to rename some other file also. Average maximum time etc working but speedo meter not working and not properly displayed. It shows up half screen and has no numbers.

Hi,
May i know the latest version of garmin for window mobile. Currently using 5.00.20 for my HTC tytn II & omnia 2. & what is the different with new version, any body have it.

Guys,

I did manage to install and run gmxt on my moov 500 taiwan. I use the file downloaded from the first page. I did a little bit of tweaking on the baud value from 11 to 57600.
However. I did encounter some problem. When ever i disabled the gps, the detail map displayed beautifully. However, if I enabled the gps (it said sirfnavdrv), the map goes blank.

I did try to set the baud value to 11 again, but the same event happened again.

Does anybody could suggest what happened and how to resolve this?

Thanks,
Iwan

Hi i have one jensen nav101 navigator this have wince 4.2 y try install the garmin and dont working this say que.exe is not valid wince aplication, y chnage dll more times and dond working... please help me.

Hello.
I have the same problem on my Magelan Triton2000, where are WinCE 5.0.
After installation from the original ZIP file to the SD card and copying all the files from the patched version I run Que.exe and get the error message, that this file is not a valid Win CE application.
Have you had the same problem? Could somebody help me how to solve this issue?

Thanks in advance.

Have u try running garmin.exe under rungmxt folder? That work for me.

Hello.
I have the same problem on my Magelan Triton2000, where are WinCE 5.0.
After installation from the original ZIP file to the SD card and copying all the files from the patched version I run Que.exe and get the error message, that this file is not a valid Win CE application.
Have you had the same problem? Could somebody help me how to solve this issue?

Thanks in advance.
Posted via Mobile Device

Have u try running garmin.exe under rungmxt folder? That work for me.


Well, I tried it and get an error message about the wrong input port. Then I set the correct settings in the .mscr file for port splitter. After this when I run the Garmin.exe again I didnt get any error messages, but the aplication wont start.
I also tried to comment all the port splitter lines as suggested in the 1st post to skip running port splitter, but still the same result.
Any other idea, please?

i have used garmin on a chinese 7" stereo with gps, i did NOT have to load a port splitter, anyway, garmin is to slow in drawing, try igo guys, more features and much faster in drawing maps.

i have used garmin on a chinese 7" stereo with gps, i did NOT have to load a port splitter, anyway, garmin is to slow in drawing, try igo guys, more features and much faster in drawing maps.
Well, I give up with running Garmin XT on my Magellan Triton. I will better use OZI explorer or iGO, which runs OK.
Thanks for helping me!

there seems to be a lot of questions and not enough answers, this garmin is to much hassel but im still determined to get it to work. im having problems with garmin not saving my settings. im going to try and do what was suggested in previous posts. ill leave feedback on my findings

Finally...after 3 days I got Garmin XT working!
I have a MIO Moov 500 w/ Windows CE5 that is unlocked with Miopocket 3.0 release 53.

1. download option 1 on first page of thread. (do not do v5.00.20w update yet.)
2. Transfered Garmin folder to root of SD card.
3. transfer my map (gmapsupp.img) to garmin folder
4. Open Garmin program @ Sdcard/Garmin/RunGMXT/Garmin.exe
if you get missing files error, then reinstall MioPocket and open Garmin.exe again
5. Open garmin, skip scanning, go to settings, about and get Software ID or Card ID and
close Garmin.
6. put number keygen.exe (garmin xt option) and then put number in sw.unl file.
7. put sw.unl file in garmin root folder.
8.. open garmin again and it should be unlocked but no GPS found....now close garmin
9. Download Garmin Mobile XT for Windows CE v5.00.20w update on page 1 of thread.
10. copy and paste contents of VM folder to VM folder in sdcard/garmin/apps and replace files.
11. open garmin and gps should work.

This worked for me.

First try was wrong for me.
First i updated to Garmin Mobile XT for Windows CE v5.00.20w and could not get unlock code. With v5.00.20w i get a hardware id code and card code. In version 5.00.10w, i only get software id code. So I downgraded to v5.00.10w and first unlock code worked...then update to 5.0.0.20w
I can unlock garmin with v5.00.10w but cannot get GPS signal. After I upgraded to v5.00.20w then I can get GPS signal.

also,

good luck

THIS POST IS FOR PEOPLE WHO LOOSE SETTINGS AFTER SHUTTING DOWN GARMIN ---

I managed to get it working, i actually didn't do anything.
Here is what I think was happening.

When you start garmin, it copies/creates settings to the systems memory (not the storage card, the actual main memory of the unit, where windows is, some would call it the ROM) - it creates a folder called garmin with your settings files inside that folder. Then when you shut down garmin, it copies that garmin folder to the SD card (so it saves your settings on the sd card when you shut down), then when you re-open garmin, it copies from SD back to the system rom again. so it copies your settings back and forth when u open and close garmin. if u start garmin with que.exe, your settings will not be saved. So run the garmin exe

the thing that was happening to me was, i was loosing my settings after i switch off the power completely. But if i open and close garmin without shutting down my device it will keep settings.

I think what i was doing is turning off the power to early and not giving it a chance to copy the files, which explains why my settings were not saving.

that's what this line is for in the garmin.mscr file (that file can be opened in notepad)

#Save new settings back to SD Card
XCopy("\Garmin\*.*", SystemPath("ScriptPath")\"Settings", TRUE)

I found this out because it loads explorer before the garmin splash screen and i quickly saw that "garmin" folder get created. thats how i figured it out.

i hope this post helps, it stuffed me around for 2 days !! so i thought id share my findings with everyone

here is what someone on another forum said -

Explorer gets loaded because Garmin won't run without it. I tried every trick in the book, but it just refuses to start without Explorer (Windows CE shell) being present. That's where the script is fairly complex it loads Windows Explorer, hides the taskbar, sets up the working environment, then starts GarminXT. On exit it saves the working environment and kills Windows Explorer.

Any chance to run the software in chinese UI?

Any chance to run the software in chinese UI?

Hi.
You should download asian version of this software for CE 5.0. On the net it is known as "Garmin_Mobile_XT_5.00.30wp-ASN_TH_No_Pain". I checked it. It works. "Install" package have only thai language fonts thai.ttf. You should download chinese font file chinese.ttf and all will be ok. Mentioned chinese.ttf is contained among others in colegue "Artful" package of the software for CE 6.0.

Regards
Jack

I have tried the asian package, the chinese UI worked. But the problem is the input to the address is using the WINCE keyboard.. any dll or files that I can make the input back to the garmin keyboard?

I have a GPS BAK 7001 7" LCD With WinCE 4.2, on a SD CARD i have


GarminMobileXTforWindowsCE_50010w.rar
GarminMobileXTforWindowsCE_50010w_only_exe_and_dll s.rar
GarminMobileXTforWindowsCE_50010w_only_RunGMXT_scr ipt.rar
GarminMobileXTforWindowsMobile_50010w.exe
GarminMobileXTFreeBasemap_4xxxx.exe
GarminMobileXTSupportFiles_4xxxx.exe
gmapsupp_v609.zip
TRC-Brasil_v609.exe
TRC-Brasil_v609.tgz
MapSource_6157.exe
POILoaderforWindows_254.exe
TrainingCenter_345.exe

And i really don't understeand where do i start ? what i install first ? on what order do i install ? My GPS uses 480x234 and i belive that something have to be changed for this resolution after i discover how to install

Do i have to install Winrar Pocket ?

> [Only registered and activated users can see links] ???

i have mio c320 digi walker
can i insall garmin mobile xt? or do i have to unlock the mio c320 befor insall garmin

regards

Hello, I've managed to install gmxt on chineze win ce 5.0 GPS device, it works well except for the fact that I cannot see maps, I transfer them on the SD card in the garmin folder, along with the gmapsupp.unl file but the gmxt doesn't sees them, and also the Mapsource doesn't see the sdmmc card of my gps, the only map set that works is the gmapbmap ( the base map)

Any ideeas? I'm going crazy

Hello, I've managed to install gmxt on chineze win ce 5.0 GPS device, it works well except for the fact that I cannot see maps, I transfer them on the SD card in the garmin folder, along with the gmapsupp.unl file but the gmxt doesn't sees them, and also the Mapsource doesn't see the sdmmc card of my gps, the only map set that works is the gmapbmap ( the base map)

Any ideeas? I'm going crazy
**********************************
hi...
you don not need going crazy :Love:
rename your gmapsupp.img to gmapprom.img and it will work.

Hey someone can please post the way to install garmin on chinese GPS win CE v4.2???

i just oploaded my app. i use in my chaineese dvd playe 7inch wince 5.0.
extract the zipped file to your sd card and download the map you want and activate it with the keygen in keygen folder you can read README file how to do.
her is the link for app. without maps.

[Only registered and activated users can see links]

you have to start the app. from \Garmin\RunGMXT\garmin.exe

if the app. cannot se the maps you add try rename your gmapsupp.img to gmapprom.img and it will work.

Hey someone can please post the way to install garmin on chinese GPS win CE v4.2???

hey thanks but it didnt work for me.. while loading garmin.exe file it prompts some port splitter error... :(

hey thanks but it didnt work for me.. while loading garmin.exe file it prompts some port splitter error... :(

************************************************** *s_tonny try to change the garmin.mscr file with this one inside RunGMXT folder.

s_tonny

Attachment

her is the file. unrar it to garmin\RunGMXT

i'll try for sure i am out of station.... thank u so much..

Hi, does anyone know how to install Garmin GPS into a GPS double din DVD player? Thanks.

Hi, does anyone know how to install Garmin GPS into a GPS double din DVD player? Thanks.

i just oploaded my app. i use in my chaineese dvd playe 7inch wince 5.0.
extract the zipped file to your sd card and download the map you want and activate it with the keygen in keygen folder you can read README file how to do.
her is the link for app. without maps.

[Only registered and activated users can see links]

you have to start the app. from \Garmin\RunGMXT\garmin.exe

if the app. cannot se the maps you add try rename your gmapsupp.img to gmapprom.img and it will work.

i just oploaded my app. i use in my chaineese dvd playe 7inch wince 5.0.
extract the zipped file to your sd card and download the map you want and activate it with the keygen in keygen folder you can read README file how to do.
her is the link for app. without maps.

[Only registered and activated users can see links]

you have to start the app. from \Garmin\RunGMXT\garmin.exe

if the app. cannot se the maps you add try rename your gmapsupp.img to gmapprom.img and it will work.

and download the attachment from post 132

and download the attachment from post 132
hi, where should put after downloaded the attachment in post 132?

hi, where should put after downloaded the attachment in post 132?

if you rea the post you can se it..

unrar it to garmin\RunGMXT and Overwrite it

if the app. cannot se the maps you add, try rename your gmapsupp.img to gmapprom.img and it will work.

My double din stated can't search Garmin GPS device, can anyone help? Thanks.

My double din stated can't search Garmin GPS device, can anyone help? Thanks.

new link

[Only registered and activated users can see links]

Hi all

I have tried every varient of the garmin software with different varients of the garmin.mscr on my china car gps entertainment unit.

every version open up and i can get to the menu, pressing on 'connect to gps' option.

My problem is that when I click on setting-info, it only says device id (8 digits) and nothing else.
I know I need the card id or software id, but I cannot get it.

I have inserted my card into a nuvi 200 and entered diagnostic mode. I scrolled all the pages but could only find the card serial, which happens to be 10 digits, but doesn't work using jetmouse keygen.

I have tried the default 1111111111 with ASN version but also no luck.

I have copied in the 50030.rar que.exe into the Garmin/Apps/WM dir, but also no luck.

Does anybody have a suggstion for me?
It would be greatly appreciated.

thanks
Phux

**
I have been able to get the card id using gamin mobile xt 4.0.0.10 on a diamond.
When i generate a unlock code with the keygen, garmin works on the mobile phone, but when i use that sw.unl on the same card with the ce software, I still get the 4 menu welcome telling me that the software is not unlocked.

Any thoughts welcome

im trying to test this on Win CE EMulator. I get an error message "Is not Valid Windows Ce Application''. Did i miss something or it doesnt work on EMU?

Hello, I have NAVIGON 1410 WinCE 6 ... Can't start Garmin XT, when I run Garmin.exe my device restarted ang go back in menu. I put Garmin Mobile XT 5.00.20 on SD card, I try a few different "GARMIN.MSCR" ... any solution for my problem...?
I can run iGO Amigo, Destinator 9 and Navigon MN 7.5.3

Thx...

hey thanks tallafar ur post 132 really worked for me on my china device.... :D
it works really perfect but takes atleast 15-20 min to gain signa in open sky.. any
solution for that????

hey thanks tallafar ur post 132 really worked for me on my china device.... :D
it works really perfect but takes atleast 15-20 min to gain signa in open sky.. any
solution for that????


s_tonny
I am happy :excited: to know that it is working for you.
about signal i dont have any id. and i dont have any problems with my device but maybe in cold start it take little more time at least one minut not more.

hope you can fix and maybe you have to ask somone here in this lovly forum and all are kindley answer the qus.

Anyone have problem with Audio going always to 100%. Even if you set it to lower value...starts beeping and it increases automaticaly to 100%. Part of the script or ?

Does anyone feel that garmin run so SLOW on the WinCE device? I always miss turns..

although voice command is accurate, and the distance is accurate, the screen draw is so slow. sometimes I make the turn already but on the screen it lags about 5-10 secs and still showing me going straight before my turn

Does anyone feel that garmin run so SLOW on the WinCE device? I always miss turns..

Everybody feel this...Maybe better to use another app, Garmin wasn't made for WinCE.

Everybody feel this...Maybe better to use another app, Garmin wasn't made for WinCE.

You're right, I'll stick with iGo :)

You're right, I'll stick with iGo :)

If it has good map for your interests, it is the best choice. My opinion.

Following this thread, i have successfully installed Garmin for my car GPS navigation system, replacing the current china gps software. A BIG Thank you from me cos i have been looking for this for a long time.

Here's the pic of Garmin running on my car GPS navigation system. I am just so happy. :)

[Only registered and activated users can see links]

@ianchew,

can you send me or attach your garmin.mscr file for me please? i got garmin to work in my car's dvd/gps but every time i pressed the 'X' to exit the programme, it will open garmin again.

tq!

@ianchew,

can you send me or attach your garmin.mscr file for me please? i got garmin to work in my car's dvd/gps but every time i pressed the 'X' to exit the programme, it will open garmin again.

tq!

I used the same garmin.mscr on #132. I did some editing by removing the "message" line so that it does not prompt, meanin it run Garmin straight away. Try that and let us know how it turn out.

@ianchew,

i will give it a try.

thanks!

@ianchew,

it is still the same. i also have done the following:

1) reset my card dvd/gps
2) installed another version of garmin xt to new card
3) used different map

but it will restart once after exit the initial garmin, then it is ok. this happens everytime. in effect, i have to close garmin twice.

@ianchew,

it is still the same. i also have done the following:

1) reset my card dvd/gps
2) installed another version of garmin xt to new card after formatting to FAT
3) used different map

but it will restart once after exit the initial garmin, then it is ok. this happens everytime. in effect, i have to close garmin twice.

it could be the GPS/DVD itself. one other thing you may check, make sure you remove any other .mscr file from the Garmin directory.

@ianchew,

solved it. it was the mscr file itself. the 'setmem' line command was not correct. i didn't realise that the 'runwait' command was directed at 'que.exe' instead of 'garmin.exe'.

all is well now. thank you ianchew and all.

Glad that it worked out for you.