Known Errors (Experiences valid for my 710):
old Remote still dead (this mean the "NOT BT" Remote);
no "poweroff" more possible (the angry Watchdog barks always and the Device wake up again);
only 5 Sdk Programs or Mapsharepreferences is not available;
SDK Programs which need Touchscreen works not more;
Pc-Connection freeze it;(only x10)
only x30 TTS Voices works, not x20, 910, Vocalizer, since 8203 rev 1.2, 8204 rev1.3 works it also
no x40light, onettssdk Emu. available;
x40 Emu. very loud Sound already at 10%, 0% Brightness is total dark, other Emus. are not affected from this strange Behavior;
in ori, xls Emu. Routecalculating freeze by me
sucks the x10 Battery empty like crazy, with the x10,x20,x30 Variant seems to works ok
and some more...
ONE´s: Postcode/zip works not with Keyboard set to ABCDE
delete Favorite works only with switchfile BTON
Original for Device: x40


There was today(11.11.) a update to 8.204.9718
navcore_8.204.9718.go540-go740.cab (http://download.tomtom.com/sweet/navcore/navcore_8.204.9718.go540-go740.cab)
navcore_8.204.9718.go940.cab (http://download.tomtom.com/sweet/navcore/navcore_8.204.9718.go940.cab)
TT Site says:
Version 8.204
(TomTom GO x40 only)

* Minor improvements

You need to download:
Have you nothing: Basicpack+ SE_ttsystem.8.20x.971x.rar
update you already through Home to 8.20x replace only ttsystem
ASR Folder for Voice Input is equal to 8.201, 8.203, 8.300
x30 Voices (http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111)

all Features, Function, use similar as already known, read readme for exact Infos

use new compatible "swichfiles over Menu" not more the old
For IQ2 need you a Map which include this Data.

all need to use ttgo.bak to say Home the correct official latest Versionnumber for your TT or Home say "invalid Version"

Changelog:
16.01. 8203 rev1.2, 8204 rev1.5: possible easier to use switchfiles
04.01. 8204 rev1.4: advanced Onscreen Messages; advanced "runcheck"; fixes for not intended(irrelevant) Behavior
30.11. 8204 rev1.3.3: 1 fix; 1 new Helptext ; 1 new Feature (http://www.ipmart-forum.com/showpost.php?p=2395398&postcount=659)
29.11. 8204 rev1.3: change ttsserver direct to a other, original nonetheless supplied; fix a few unimportant Issue
22.11. 8204 rev1.2: extended Outsource; Boothelpmessage disabled, switch on with viewmsg; other minor Improvements
16.11. 8204 rev1.1: revised cleaning, rm, btoff, etc. take no effect without runclean, this works now separate
11.11. new 8.204.9718, one "original", one for x20,x30,910; Cleaning now reversed, Standard disabled, because original is there no cleaning more, switch it again on with "runclean", with Outsourced.bin almost useless to run a cleaning
11.11. 8203 rev1.1 should better compatible to x20,x30
switchfiles, model.txt etc. can you now store in a Folder "config"; use root or \config NOT both
inbuilt "Flasheraser" use switchfile "cleanflash" and it delete all what is possible from Flash (*.mac, Settings,...)
Now only as .dlc ,you can use
http://jdownloader.org/download/index

..will download, test ..... and share :)

many thanks

works perfect on Rider2

quick testing, but no joy so far on my 910. Like previous 8.2 it won't go beyond the tomtom logo. Didn't use the new bootloader btw.

same problems of previous version on my 930t.

why!?!wh!?!!? bad fate!!! ;)

TT One XL...same problems of previous version..:nod: ...boot 5.5106..OK

Should someone mirror it again to ***RS then change the rar a little that it have a other crc.


***RS

Yes, thank you for suggesting that someone re-upload this to a "scene" safe and "scene" accepted destination

This J-off loader crap is just that.....CRAP !!!!

still the same problem
HD is not working
thanks anyhow

here (41 Mega)
http://rapidshare.com/files/158209503/navcore.8203.9717.rar.html

I sure wish someone could give TTuser an X40 backup. It would benefit us all.

does anyone get ms?

all new navcore 8.203 files here : http://www.filefactory.com/f/75484819e6b97760/
...just let to upload...have slow internet so will take about 1 hours :)

@TTuser:HI and thanks for all your precious work.....
I got a TT Go510, do I need a specific ttsystem like for navcore with ttsystem 8.010/8.011?

thanks thanks thanks!

I sure wish someone could give TTuser an X40 backup. It would benefit us all.

Well the X40 are not yet in the markt that is the problem
i am looking forward to get it but it not yet lanced to the markt

Well the X40 are not yet in the markt that is the problem
i am looking forward to get it but it not yet lanced to the markt

you can buy it in UK :

http://www.handtec.co.uk/product.php/1410/tomtom-go-540-live

It's also for sale in TTUser1's own country

you can buy it in UK

That's only a pre-order, but they're out very soon on 7th November.

It's also for sale in TTUser1's own country

They are not
i did called Tomtom but they said its need few time to be out

in report Safety camera's i don't see speed camera's in the map
but i still get warning
any suggestions pls ?

Are they TomTom's own speed cams? If so, they are not classed as points of interest so you don't see them on the map.

Are they TomTom's own speed cams? If so, they are not classed as points of interest so you don't see them on the map.

if you just read what i said you will understand what i mean
i am using Tomtom Databas speed camera's
So they are not POI But they are At TOMTOM Services
So if we use TOMTM services and after SPEED CAMERAs we will see them in report Safety camera's

Hi,
New 8.203 navecore works fine for me, as 8.201 was but with very minimal testing. :dance:

Tomtom GO 720T
Bootloader: 5.5022
Set in x40 emulation
System and map is on 4 GB SDHC, internal memory is empty.

Map: Western and Central Europe v810.1907 Full

Original x20 (and latest) TTS voices used. (Don't work with older (6.5.3) and x30 voices)
TTUser x30 ASR used.
I don't use Outsourced.bin

TTS, TMC/RDS, GPS, Bluetooth seem to work fine.
I don't use Bluetooth because I own no compatible cellphone but Bluetooth scan finds phones in the neighborhood.
No IQ Routes v2 related things found? (stays the same as normal IQ Routes).
No freeze at the moment.

Just a problem: TTS doesn't work in dialogue for the street name, only this, and only for my hometown: Paris, France. I tried several big cities and no problem. I also deleted "MapSettings.cfg" file in the map directory... No clue. :confused:
I must enter street by tapping the microphone button twice on the keyboard
Maybe a map related problem?

Also should the 5.5106 bootloader be safely used?

Thanks, cheers.

full tested on my 930:

no light sensor
no connection to tomtom service like meteo and account
no choice to show name of next road.

for all features all is ok.

full tested on my 930:

no light sensor
no connection to tomtom service like meteo and account
no choice to show name of next road.

for all features all is ok.

Original File TomTom

GO 920
h**p://d*wnl*ad.tomtom.xxx/sweet/navcore/navcore_8.203.9717.go940.cab

Go 520-720
h**p://d*wnl*ad.tomtom.xxx/sweet/navcore/navcore_8.203.9717.go540-go740.cab

xxx=com

replaced the ttsystem with that one of TTUser :urtheman:
Restart .....and enjoy :pmpl:

hello to all

your reputation is -5 and is true.....

X40 8.203 with 5,5106 works really good on the x20. Good clear bright screen and lots of new icons. Wireless features don`t work. ie when you press icon it goes back to main screen. Same for mobile phone icon. Navigation side of it works good but only with original map. TMC works with colour codes. Cannot get 810 map to work with it. Voice recog works too.
Can`t get the virtual go to allow me to connect to buddies. It asks me for username and password then tells me the content was bought for another device and cannot be used with this device.....very clever!!!

Thanks TTuser.

Works fine on my One XL. It doesn't have many inprovements compare to 8.201, and stil no 'IQ 2'. But it's always nice the have the newest version working on your system.

5.5106 bootloader doesn't give any problems.

How do you know if IQ2 is working? Seems to plot routes a little faster.

full tested on my 930:
no light sensor
no choice to show name of next road.

(I've personally never seen the light sensor working on my 720, even freshly opened :ashamed:)

It seems there is no option to show or not the name of the next road. AFAIK, it has been moved from the bottom to the upper left of the screen. Actually mine shows the next road there.

(I've personally never seen the light sensor working on my 720, even freshly opened :ashamed:)

really? it's no normal. my sensor is very useful to save my battery life so i can't renounce to it

anybody try this navcore on TT 910 and working ??

anybody try this navcore on TT 910 and working ??

anybody try this navcore on TT 710 and working ?

i can't crack it. where is the newest patcher?

i can't crack it. where is the newest patcher?
Everything that is needed is posted in the first post of this thread

Thanks TTuser.

Works fine on my One XL. It doesn't have many inprovements compare to 8.201, and stil no 'IQ 2'. But it's always nice the have the newest version working on your system.

5.5106 bootloader doesn't give any problems.

I suppose that to make the IQ2 works, you need a map with IQ2, and I don't think it's available for the moment.

Tried the NavCore on TT-One NE (V2 with SD). Seems to run better then 8.201
Where I previous needed x40light, it now runs without problem under x40
Even without switches it leaves a little more memory.

Didn't dare to try the new bootloader....yet

i can't crack ttsystem. someone knows why? and it always reboots when there is the start up picture

:ashamed:hi i have got it to run on a tomtom one classic with the new bootloader but just one thing i cant get to work is the navigate by postcode thats the only problem i have with it. put noclean in config folder but still wont work pls can anybody help :ashamed: :suicide:

anybody try this navcore on TT 910 and working ??Tried...not working as yet....

anybody try this navcore on TT 710 and working ?
If you read Page 1...TTuser specifies he himself has Go710 so YES is easy answer.
Removed Switches I don't use, tried all the usual stuff...
...TTS (comp.voice) & ASR (voice command) are PERFECT!,
..BT, Phone, etc..
..v.fast Signal lock, Route calc negligable...
@10%, Voice v.loud - check Link to Noise in Volume prefs is unchecked (Volume @ proper 10% again )
This is way better than 8201 ( TomTom beta version, I believe ), well worth the wait for proper NC release.

No problem with Boot 5.5106 either.....

@chamaruco :confused:

What's your big problem ???
Only the 10 points of reputation? I do not concern.

Do something positive :good2:

P.S.: Excuse my bad English.
hello :hehe:

you are excused.

Something positive; the links you provided are the official NavCores, the one from TTUser include patched ttsystem. So with your linked versions you probably won't get the TT to work.

This navcore is working quite ok on my 720. Except for the lightsensor all thing seems to work. I did not test hd traffic yet.

One problem is remaining. How to get mapshare working with TT Home. It says 'no maps' (countries) for mapshare settings. I downloaded the dll and searched on this forum but solutions didn't work for me.

What is the meaning of the emulation for example x940?

CoD2

You don't need to crack ttsystem. ttsystem from TTuser always cracked. So just take it from first post.

can some one please upload in rapidshare

Sorry if I thought about making a contribution. :ashamed:

I never bypass the TTUser thought. :urtheman:

Do as you like. :hysteria:

@ lessram:
probably will not get the TT to work. Probably not. You must be sure. :exactly:

P.S.: Excuse my bad English

I noticed that as a person that you are not native speakers ....... :axe:

jacleon, you are so pretty:LoL:

but now it's medicine time:dance2:

be quiet.:hehe:

Just try !!
Download the official navCore
Add you cracked map
and I am sure it will never work

@lessram
sorry in the moment in which I have supplied the links, already I had tried all on my Go 520. Official NavCore, cracked map, and ttsystem of TTUser. All it works to the perfection.
YOU HAVE NOT TRIED: Auguries. :hehe:

@chamaruco
Doctor, gives the medicine to my that I tranquilize myself .............:thanks:

.......... or brain up flies and not to turn to you. :confused:

can some one please upload in rapidshare
Surely can. Although bound to be pulled pretty quick.
http://rapidshare.com/files/158486265/TTusers.8.203.9717.rar

btw, have added a few null files to alter CRC.

really? it's no normal. my sensor is very useful to save my battery life so i can't renounce to it
Sure, but I've never seen it working... Perhaps because I've set brightness too low (50%)?
But I can confirm too it's not working with this navcore. :nono:

.... mirror : http://www.filefactory.com/f/75484819e6b97760/

...download, install and ...enjoy :)

Works perfectly on my 510!!!

THANKS TTUSER!!!!!!!!

@lessram
sorry in the moment in which I have supplied the links, already I had tried all on my Go 520. Official NavCore, cracked map, and ttsystem of TTUser. All it works to the perfection.
YOU HAVE NOT TRIED: Auguries. :hehe::

:urtheman:

??????????????
You did install the cracked ttsystem !!!! Which is the most important file of NavCore (it's infact THE file that makes the difference between cracked NavCore and non-cracked). Think be4 U talk !
:hehe::hehe::hehe:

But lets cut the crap....
The new cracked by TTUser NavCore works for my TomTom, and the semi-non-cracked NavCore works for you, so all is fine. That's what we're here for. Ain't it?

Works perfectly in x40 emulation on my TT GO 720
on an external 4 GO SD/SDHC card without problems
(no need to put it in the device's internal memory)

U must change in your
ttgo.bak
with these news values
.................................
BootLoaderVersion=your's (ex : 55022)
RamDiskVersion=20081021
LinuxVersion=232962
ApplicationVersionNumber=8203
ApplicationVersion=9717
................................

But still does not work :

* GPRS trafic with subscription via Bluetooth mobile (it wants to connect to a tomtom HD trafic server yet not available in Europe, maybe need to change only a file to get old normal tomtom trafic subscription ? I will try in x30 emulation ...)
* Meteo
* Google research
* friends
* plugin (reverseitn)

RDS/TMC device v 1.3 is OK
Bluetooth via mobile to phone (Motorola Razr V9) is OK
FM transceiver for mp3 music is OK
IRQ route is OK
Change icon is OK
All driving voice commands are fully operationnal (u need LoquendoTTS version 7)
mapshare updates are OK

To install this new version quickly :

- have a fully functionnal ttuser navcore and a cracked map on a sd card (for instance a navcore v 0811 or v 0816 or v 0851)
- install over it the ttuser navcore basickpack 8 203.9717
- install the new ttuser directory \ASR
- install ttuser SE ttsystem 8 203 9717
- install the new tomtom home dll in the PC right directory after having connected to tomtom home and tried the option 'Manipulate my tomtom' to load some necessary files in this directory.
- swich update is optional

That's all.

New model 2008 serie 3 works perfectly well on one XL.
thank you very much has our friend Ttuser.

i can't crack ttsystem. someone knows why? and it always reboots when there is the start up pictureYou probably have some corrupt files on your system.
Backup your files & format so you have a clean system to install to.
Install the files from the first post.
Add your map.
All should be working.

@capao33
My 720T loves it!

Works perfectly in x40 emulation on my TT GO 720
on an external 4 GO SD/SDHC card without problems
(no need to put it in the device's internal memory)

U must change in your
ttgo.bak
with these news values
.................................
BootLoaderVersion=your's (ex : 55022)
RamDiskVersion=20081021
LinuxVersion=232962
ApplicationVersionNumber=8203
ApplicationVersion=9717
................................

But still does not work :

* GPRS trafic with subscription via Bluetooth mobile (it wants to connect to a tomtom HD trafic server yet not available in Europe, maybe need to change only a file to get old normal tomtom trafic subscription ? I will try in x30 emulation ...)
* Meteo
* Google research
* friends
* plugin (reverseitn)

RDS/TMC device v 1.3 is OK
Bluetooth via mobile to phone (Motorola Razr V9) is OK
FM transceiver for mp3 music is OK
IRQ route is OK
Change icon is OK
All driving voice commands are fully operationnal (u need LoquendoTTS version 7)
mapshare updates are OK

To install this new version quickly :

- have a fully functionnal ttuser navcore and a cracked map on a sd card (for instance a navcore v 0811 or v 0816 or v 0851)
- install over it the ttuser navcore basickpack 8 203.9717
- install the new ttuser directory \ASR
- install ttuser SE ttsystem 8 203 9717
- install the new tomtom home dll in the PC right directory after having connected to tomtom home and tried the option 'Manipulate my tomtom' to load some necessary files in this directory.
- swich update is optional

That's all.

What about light sensor and voice volume?

@ Lessram (Excuse my bad English) :sorry:

There is no worst deaf to those who do not want to hear, and who has blinders like horses.

TEST. (Check the NavCore filexfile, and you'll see)

Greetings and STOP. Amen

P.S.: you express what you're :exactly:

Dared to take the risk to use the system 5.5106 on my TTOne NE (v2 with SD)
Works without problem ! (Luckily)

Don't see/notice any difference with 5.5105. But looking at the version number difference, the change is soo tiny, it's probably a super minimal bug they solved.

New bootloader 5.5106 works fine on my GO510.

KeysGuy

For TT GO 720 T

- light sensor is OK
brightness can be increased/decreased by vocal command without problems
- voice volume is OK (not to loud) and can be increased/decreased by vocal command without problems
- only problems remain with TomTom SERVICES (meteo, google search, ...) and TomTom TRAFIC via wireless Gprs Mobile Bluetooth with paying subscription that is said to be ... a HD trafic service not yet existing in x40 emulation....

New bootloader 5.5106 works fine on my TT ONE 1st edition.

Dutch voice Bram & Eva isn`t working on my Go 720 with NC 8.203.
My light sensor don`t work to.:sorry:

Since I can activate the map iberia 6.75 of navteq with the navcore 8.203 or 8.201? The problem is that across the device says to me " this map ist not activated " and i make "activate" the device it is restarted and I cannot activate it.
Someone knows the solucion?

Thanks

For TT GO 720 T

- light sensor is OK
brightness can be increased/decreased by vocal command without problems
- voice volume is OK (not to loud) and can be increased/decreased
Light o volume sensor is different by going up and down with level control!
Light sensor don't work

Dutch voice Bram & Eva isn`t working on my Go 720 with NC 8.203.
My light sensor don`t work to.:sorry:

On my Go 720 with NC 8.203, Bram and Eva are working OK :D

Where can i find the downloadlink for the new bootloader5.5106?
I didn't find it ... :(
Bad eyes?...

look into the folder available in this 3d

Separate link for bootloader 5.5106 if anyone needs it: http://rapidshare.com/files/158709379/system5.5106

Tried the NavCore on TT-One NE (V2 with SD). Seems to run better then 8.201
Where I previous needed x40light, it now runs without problem under x40
Even without switches it leaves a little more memory.

Didn't dare to try the new bootloader....yet

Yes, much better than 8.201. :good2:
"Reality View" is shown better (higher resolution)

Quote:
Originally Posted by pribo
Dutch voice Bram & Eva isn`t working on my Go 720 with NC 8.203.

Same problem here with NC8203 no voice working! Any idea's?

testing go on...
no ept on my 930t

Quote:
Originally Posted by pribo
Dutch voice Bram & Eva isn`t working on my Go 720 with NC 8.203.

Same problem here with NC8203 no voice working! Any idea's?

Did you keep the original voices directory with data14.chk and data15.chk of the working 720 configuration? Here the Bram and Eva voices are working perfectly :nod:

TomTom ONE 3rd Edition (w/modded external Kingston 2GB microSD)
Boot 5.5012
NA v810.1907
dummy speech files
btoff, ttsoff, rm, x40
A:8010
B:9369

Did "Reset factory settings", if not, get "Busy planning a route" in loop
Think not like MapSettings.cfg

freeze/reboot on:
Navigate to -> Address -> Zip Code
Navigate to -> Latitude Longitude
Add Favorite -> Address -> Zip Code
Add Favorite -> Latitude Longitude

Still testing......

Update: x20, no freeze on Zip Code or Latitude Longitude

works with one V2
emulate X20:ilove:

thx for posting the bootloader link.
Installed the new navcore on my 710 and it worked!
no problems!

I just hope my battery issue is solved now...
Will test it

Thx to this great community!:thanks:

I have a strange problem, this is the first time that a new navcore dosen't work on my tomtom ONE V2. in this case i put the new "navcore_SE_8.203.9717_basicpack" + "Se_ttsystem.8203.9717" on the SD root, and... the tomtom still remain locked on the double hands initial screen...

How is possible? I maked all the necessary step I think...

its on the SD Root? Do you have a file on the internal named TTSYSTEM? That is what happens if you have a "bootable" file system in both the internal and SD memory locations.

rename the TTSYSTEM on the INTERNAL memory to xxTTSYSTEM, then try to reboot.

its on the SD Root? Do you have a file on the internal named TTSYSTEM? That is what happens if you have a "bootable" file system in both the internal and SD memory locations.

rename the TTSYSTEM on the INTERNAL memory to xxTTSYSTEM, then try to reboot.

My Tomtom ONE V2 use only SD card, I don't have any internal memory... I tried several time with the same result: with the new navcore the satnav is locked to the double hands screen. :suicide:

i have the same problem. it always restarts

Did you keep the original voices directory with data14.chk and data15.chk of the working 720 configuration? Here the Bram and Eva voices are working perfectly :nod:
Yes, I did.
Bram and Eva is working when I delete Saskia, but I use Saskia a lot.

When navigating to postal code or latitude it freezes on one

ttxl also working with bootloader 55106. But the device is still displaying "Boot 5.5012".
I don't know how come :(

With my TT ONE New Edition v2 work this v8.203 like a charm with the emulation x40. :wave:

Thanks for share TTuser. :good2:

Greets TommTomm.

My Tomtom ONE V2 use only SD card, I don't have any internal memory... I tried several time with the same result: with the new navcore the satnav is locked to the double hands screen. :suicide:

Did you use the last bootloader ? Because that was my problem too. It was solved with bootloader 5.5106

On my One XL work perfect. In new Navcore I have not problem with clean mapsetings.cft after connect to TT Home a run Mapshare. Thaks.

My Tomtom ONE V2 use only SD card, I don't have any internal memory... I tried several time with the same result: with the new navcore the satnav is locked to the double hands screen. :suicide:

My tomtom One second edition have only SD Slot (no memory) and I just put navcore_SE_8.203.9717_basicpack + Se_ttsystem.8203.9717 to root of SD card over the old files and it's work on first try.

My bootloader is the 5.5012

On my One XL work perfect. In new Navcore I have not problem with clean mapsetings.cft after connect to TT Home a run Mapshare. Thaks.

Did you use the last bootloader ? Because that was my problem too. It was solved with bootloader 5.5106

It's true, I upgrade the bootloader and now the new navcore work well! thank you Flitz :wave:

fm problem on my go920 any help???

x40 Navcore 8.203.9717

Download link: http://www.megaupload.com/?d=P2LGGRR6

http://www.megaupload.com/?d=P2LGGRR6


THANKS !!!! To the UPLOADERS

F N sweet.... all my problems solved with upgraded bootloader 5.106 snd new navcore!!!


THNX TTUSER

would be this possible in a future to put this new version of the navcore in GO910?
or we can say that it died for our Go910.

Anybody tested yet with ONE V1 (original) and bootloader 5.5106?

The main problem on TT One that the best emulation for that is X40 Light that is not available in this version.

The other emulation it's quite too big for TT One.

Euhmmm... I am running the x40 (not light) on my TomTom One without problem. With the previous version (8.201) I needed to use x40 light, but this new one doesn't give any problem sofar !

When navigating to postal code or latitude it freezes on one
With X20 and X30 mine is working ok without freezes when navigating to postal code or latitude.

With X20 and X30 mine is working ok without freezes when navigating to postal code or latitude.

How about X40? What bootloader guys you on? Me on 5012.

IMPORTANT WARNING for TomTom users that have a perfect Bootloader 5.5022!!!

I found that 5.5105 Bootloader, randomly, it causes many File System errors!!!
Have you delve into this doubt with new 5.5106 Bootloader????....
You can note this problem:
a) only if GO hangs or
b) if you makes a Scandisk ALL (in Winzozz) or Disk Utility with "Repair or Verify Disk" (in Mac OS X).

If also the new 5.5106 Bootloader have the same bug of 5.5105, TomTom can freeze at startup (during boot TomTom always writes some files...) or unexpected TomTom hangs during navigation (ex: changing the night-day display or some preferences, etc...)

Important: My GO 720 with NC 8.051 & BL 5.5022 never creates errors!
The GO 720 of my sister, with NC 8.051 & BL 5.5105 yes.

To verify:
You can force the Go with BL 5.5105 (or with 5.5106) to make errors, copying many POI (100 ca.) into the Device and/or into the SD/SDHC card; then deleting they; then emptying the Trash; then newly copying POI into the same or another map, ... and verifying with Scandisk ALL (in Win) or with Disk Utility (in Mac)

i notice that sdk folder determine self power on.
i've deleted it and now all is ok with nc 8.010 and bt 5.5106 on my 930t.

try to do something like this to solve your problem..we don't need sdk tool..no more...;)

IMPORTANT WARNING for TomTom users that have a perfect Bootloader 5.5022!!!

I found that 5.5105 Bootloader, randomly, it causes many File System errors!!!
Have you delve into this doubt with new 5.5106 Bootloader????....
You can note this problem:
a) only if GO hangs or
b) if you makes a Scandisk ALL (in Winzozz) or Disk Utility with "Repair or Verify Disk" (in Mac OS X).

If also the new 5.5106 Bootloader have the same bug of 5.5105, TomTom can freeze at startup (during boot TomTom always writes some files...) or unexpected TomTom hangs during navigation (ex: changing the night-day display or some preferences, etc...)

Important: My GO 720 with NC 8.051 & BL 5.5022 never creates errors!
The GO 720 of my sister, with NC 8.051 & BL 5.5105 yes.

To verify:
You can force the Go with BL 5.5105 (or with 5.5106) to make errors, copying many POI (100 ca.) into the Device and/or into the SD/SDHC card; then deleting they; then emptying the Trash; then newly copying POI into the same or another map, ... and verifying with Scandisk ALL (in Win) or with Disk Utility (in Mac)

sorry, but this topic is about navcore 8.203 not 8.051
8.203 freezes , 8.051 not

this has nothing to do w bootloader

fm problem on my go920 any help???
-----------------------------------------------
Put swith file fmon (text file lenght 0) in root
-----------------------------------------------

GO 520 + NC official 203.9717 + ttsystem TTUser + BL 5.5106
with model.txt (emulation x30)
also OK TomTom Services :excited:

OK 99.9%. Missing only checking on night vision automatically.

Hello :ilove:

can someone please tell me how to upgrade the bootloader?

can someone please tell me how to upgrade the bootloader?

remove the digits behind system
save and reboot

All working - great work from TTUser :-)
testet Bootloader 5.5106 on oneV1 = all ok

yess
all it works with my 720

100% tested
very fast and stable..
earlier version sucks .. (8.201)
but this is ok.
===> i dont use switch files <====

thanks TTUSER :ilove:

How about X40? What bootloader guys you on? Me on 5012.

Same problem here, please help us.

Can anyone provide a link for the ASR.RAR file, I'm using a 3GB connection and Jdownloader is not working.

I've installed the unpacthed version of the TomTom .CAB file on my 720 and all is working except the voice commands which I suspect is due to not having the correct ASR files.

:confused::hehe: if you use the original .cab then have you also the correct ASR or mean you TT pack the wrong in the cab
you need a file support_asr.dat

remove the digits behind system
save and reboot


Thanks all working on my 530 now with new bootloader

For TT GO 720 T

- light sensor is OK
brightness can be increased/decreased by vocal command without problems
- voice volume is OK (not to loud) and can be increased/decreased by vocal command without problems
- only problems remain with TomTom SERVICES (meteo, google search, ...) and TomTom TRAFIC via wireless Gprs Mobile Bluetooth with paying subscription that is said to be ... a HD trafic service not yet existing in x40 emulation....

I`ve installed this navcore but i don´t have that option for command the TT by voice. What do i miss ?.

:thanks:zerebede

I`ve installed this navcore but i don´t have that option for command the TT by voice. What do i miss ?.

:thanks:zerebede

I saw the option with the 8.2 version but it was grayed out for me. Did it work for anyone? Does it work now?

Installed on my TomTom 720.

Works fine apart from TomTom services and the light sensor. with x40 in the model

if x30 in model.txt, everything is OK

I saw the option with the 8.2 version but it was grayed out for me. Did it work for anyone? Does it work now?


Resolved !!. I was running on emux30 by the file model.txt. Just erased the file and now i`m running on x40:dance:. Testing on GO 710.

Question: why there`s not the option (intruccions by FM out) ?. There`s only music by FM out. I would like to test it on my GO 920 but if there`s no FM out !!!... Hummmm


:thanks:zerebede

I`ve installed this navcore but i don´t have that option for command the TT by voice. What do i miss ?.

:thanks:zerebede

----------------------------------------------------------
U need to be in X40 emulation
put X40 in file model.txt in root (or X30 for X30 emulation...)
---------------------------------------------------------

works fine with TT GO 720

but yet not succeeding in having any of these TomTom services (idem in X30 emulation...error TomTom server...
when connecting)
- Weather (normally free service)
- Friends ( idem)
- Google search
- Download QuickGpsfix (idem)
- My TomTom account

But RDS/TMC is OK
impossible also to have TomTom trafic via Gprs Bluetooth subscription.

Any ideas ?

----------------------------------------------------------
U need to be in X40 emulation
put X40 in file model.txt in root (or X30 for X30 emulation...)
---------------------------------------------------------

:good2::thanks::partyman:

i have but x40 in the model.txt. it doens't wotk, x30 is the only one that will with my 720

i have but x40 in the model.txt. it doens't wotk, x30 is the only one that will with my 720


Erase the file model.txt from your card and your TT keeps on x40.



:partyman:zerebede

i have but x40 in the model.txt. it doens't wotk, x30 is the only one that will with my 720

-----------------------------------------------------
In Mine TT GO 720 T
i have X40 value in model.txt file in the root
all is quite good
----------------------------------------------------

if i have x40 in the model.txt or if i dont have a model.txt file at all in the root then the light sensor will not work nor will tomtom services, are they working on other go 720 devices with x40 emulation?

if i have x40 in the model.txt or if i dont have a model.txt file at all in the root then the light sensor will not work nor will tomtom services, are they working on other go 720 devices with x40 emulation?

-------------------------------------------------------
Not for me even in x30 emulation (TT GO 720)
-------------------------------------------------------

if i have x40 in the model.txt or if i dont have a model.txt file at all in the root then the light sensor will not work nor will tomtom services, are they working on other go 720 devices with x40 emulation?
------------------------------------------------------------
be careful
I u put x40 value in model.txt file in your root
there is also a SECOND file named model.txt
in ..\switchfiles.zip\config\model.txt
who contains x20 value.
U must have ONLY ONE model.txt file, either in ROOT
or in CONFIG directory
----------------------------------------------------------

TOMTOM 720 now booting with SD card in. Seems faster and a few more options. need to have a play around to see whats working

rm (experimental ttsuser switch) to save more memory (file text rm length 0 in root)

don't put it with a bluetooth wireless connexion or else it will be
breaked down (bug)

If Folder config exist then interested not more what in root is.
need no model.txt with x40 for x40, because x40 is Standard
also are only all other Emus defined, you would can write oinkoink in model.txt and you would have also x40:hehe:

thanks TTuser

but if i write x30 (value) on my TT GO 720 in model.txt in \config
I get a real x30 emulation.

this is what should happen, what mean you should others happens if you write x30 into it:confused:

@ttuser
have u an idea about non working all TomTom Services in X30 or X40 emulation (TT GO 720 T) ?
thanks a lot

-----------------------------------------------
Put swith file fmon (text file lenght 0) in root
-----------------------------------------------

i put fmon file in root but nothing... or i have do too something more???

nothing to do except puting switch file fmon in root (for me) and verify u have switchfiles.zip in root and also these 3 files in your root :

fm2010parameters
fmon
fmsignal

nothing to do except puting switch file fmon in root (for me) and verify u have switchfiles.zip in root and also these 3 files in your root :

fm2010parameters
fmon
fmsignal

i put fmon file from switchfiles.zip root to my tomtom memory... nothing... whats wrong??

i put fmon file from switchfiles.zip root to my tomtom memory... nothing... whats wrong??
--------------------------------------------------------
Ha've u also verified the presence of the 3 files i've said ?
--------------------------------------------------------

--------------------------------------------------------
Ha've u also verified the presence of the 3 files i've said ?
--------------------------------------------------------

yes i have 3 files

yes i have 3 files

I have the three folders mention, MP3 works OK but no transmission to radio via FM. Any ideas

Cheers:confused:

Another question, has anyone been able to use the voice command function in x40 emulation mode on the GO 720? i press the button and speak but nothing happens.

never mind fixed it!

I have the three folders mention, MP3 works OK but no transmission to radio via FM. Any ideas
FM?
easy reading from Page 1

Known Errors (Experiences valid for my 710):
old Remote still dead (this mean the "NOT BT" Remote);
no "poweroff" more possible (the angry Watchdog barks always and the Device wake up again);
only 5 Sdk Programs or Mapsharepreferences is not available;
SDK Programs which need Touchscreen works not more;
Pc-Connection freeze it;
only x30 TTS Voices works, not x20 (others not tested);
no onettssdk Emu. available;
no x40light Emu. available;
x40 Emu. very loud Sound already at 10%, 0% Brightness is total dark, other Emus. are not affected from this strange Behavior;
in ori, xls Emu. Routecalculating freeze by me
sucks the x10 Battery empty like crazy
and some more...
works not for 910
x20: FM, Lineout
930: Lightsensor, EPT
ONEs: Zipcode, Latitude Longitude
Original for Device: x40


When it is fixed, it will be announced & this text removed.
Always best to check TTuser Known Faults List on Page 1 of SE Navcore Thread.
yDG

What about HD Traffic and the HD Traffic Receiver... do they work with this renewed NC version??

Switch files, can anyone post instructions on how to configure this, I've downloaded the file from the first post, and then..

Created a \config directory in here I've created the model.txt file with x40 in.

Copied the two SDK directories to the root, ie \sdkregistry\

Tranferred hiddenclockbutton to root.

When I touch the clock in the about/verion screen it flashes and appears to reboot, but I'm unable to see or find the screens that show the switch setting and emulation modes.

Also there's references to switchfiles.zip where is this file, do I need to create it?

Thanks in advance

FM tranceiver - X40 emulation - does not work on a GO 720 T

I think because FM transmission is only for future TT GO 940 (not for 540 - 740) and ttuser basickpack v 8 203 does not include that.

So i think maybe it's necessary to load original navcore Go 940 and then try with ttsytem patched ?

Another question, has anyone been able to use the voice command function in x40 emulation mode on the GO 720? i press the button and speak but nothing happens.

never mind fixed it!

---------------------------------
U need adapted \ASR folder (automatic speech recognition) with your map.
---------------------------------

GO 710 nav 8203 map WCE 810 & Ibéria 810, Boot 5.5106, five star*****.
The light sensor just work when GO 710 is on the windshield holder:dance:.

Waiting for FM transceiver to try it on GO 920.

@ TTUser :urtheman::partyman:

:ilove: zerebede

did your light sensor work??????

did your light sensor work??????

Yes on GO 710 but just when is on the holder of the car. Same as nav 8201.

PS: the holders for GO x20 they`re diferent




:partyman:zerebede

This version seems a lot more stable than the previous. BT works and making recieving phone calls and reading aloud text messages works. Light sensor does not work or FM but TMC does as well as now booting with SD card in as well. IQ routes and lane guidance is fine. This is using the original files downloaded from tomtom and just TomTom users system file

This version seems a lot more stable than the previous. BT works and making recieving phone calls and reading aloud text messages works. Light sensor does not work or FM but TMC does as well as now booting with SD card in as well. IQ routes and lane guidance is fine. This is using the original files downloaded from tomtom and just TomTom users system file

Sensor works fine on GO 710 as i said above, i discover it when i`d installed nav 8201. If you got the GO 710 in your hands the sensor does`nt work. The other problem for The GO x20 is the FM. There`s no FM out for instructions option.

:partyman:zerebede

is HD Traffic working in this version?

maybe that our x20 or x30 devices run their light sensor after connection to car charge wire?

is HD Traffic working in this version?

------------------------------------------------------
HD trafic does not work (GPRS mobile bluetooth subscription)
but RDS/TMC device yes.
---------------------------------------------------------

download last original navcore for TT GO 940 here
http://download.tomtom.com/sweet/navcore/navcore_8.203.9717.go940.cab
and then patch with ttuser ttsystem

Yeah light sensor is differnt on the x20, hopefully it can be fixed but in the mean time you can just put a switch to night view in the quick menu. or use the voice command.

The line out doesn't work on my x20. I can't hear my music through my car speakers :(
I am running with x40 emulation.

it's normal line out does not work with TT Go 720 and this navcore

it's normal line out does not work with TT Go 720 and this navcore

yes i tried everything and line out DOES NOT WORK WITH 720.....

I have a TomTom one V2.

With X40 emulation it freezes when I "navigate to Latitude". I'm using 5.5106.
Can this be solved? Am I doing something wrong?

With X30 or X20 emulation all works well, but it looses the new menu look which is much more atractive...

Thanks

I have a TomTom one V2.

With X40 emulation it freezes when I "navigate to Latitude". I'm using 5.5106.
Can this be solved? Am I doing something wrong? ...


Thanks

You're not doing anything wrong. TTuser mentioned in first post as "known errors" that for the ONE's it doesn't work when "Navigate to Latitude or Zipcode" with x40 emulation.

@ TTUser

Dear TTuser. Since you provide many people the possibility to try all new navcores on their TomToms Í have a small question. Can you make HD Traffic working? This would be very nice since now it is not working.

Thanks in advance.

:urtheman:

Tested on a GO 720, all works fine except the FM and line out but it's normal ...

thanks !

maybe that our x20 or x30 devices run their light sensor after connection to car charge wire?


That`s a very good thinking:good2:. :oops2: But then there`s no FM out:afraid:



zerebede:partyman:

have you tried? i've not with me my nav...

You're not doing anything wrong. TTuser mentioned in first post as "known errors" that for the ONE's it doesn't work when "Navigate to Latitude or Zipcode" with x40 emulation.

Where should it crash ?
I use TT-One v2 (with SD)
8.203.9717
5.5106

When I use latitute it sets the route, and in demo it starts as it should
Postalcode... ditto....
W&C Europe 8.10 without ZIP map !! Where I always believed this was needed specifically for UK & The Netherlands. But not (anymore)

Where should it crash ?
I use TT-One v2 (with SD)
8.203.9717
5.5106

When I use latitute it sets the route, and in demo it starts as it should
Postalcode... ditto....
W&C Europe 8.10 without ZIP map !! Where I always believed this was needed specifically for UK & The Netherlands. But not (anymore)

Glad you got it working. Surely someone else would be even happier if you tell them how you managed.

About TomTom Trafic

this new navcore neither works with TomTom trafic in X40/X30 emulation on Gox20/Gox30 with a wireless GPRS bluetooth connexion
(with paying tomtom subscription)
nor any tomtom services (weather,...).

But I'm sure TTuser can do anything for that.

As for HD trafic it is only for GO X40 and with a new paying subscription (with an HD receiver and a SIM card inside) and it will never work with gox20/gox30 with this navcore. In this future HD trafic all services will be payed (weather, ...).

Glad you got it working. Surely someone else would be even happier if you tell them how you managed.

You tell me.... I did nothing special.
Only clue I can think of (and that is what I mentioned in the posting) leaving out the zip map. Sad thing about that is that you can only use the numbers from the postal codes... (that's why for the UK and The Netherlands there's the specific zip map)

To make sure; coordinates like this is what you mean by latitude; N 42° 52.638 / E 3° 2.827 ???? This works without problem, and I really didn't do anything special to make it work. it simply works.....

About TomTom Trafic

this new navcore neither works with TomTom trafic in X40/X30 emulation on Gox20/Gox30 with a wireless GPRS bluetooth connexion (with paying tomtom subscription) nor any tomtom services (weather,...).

But I'm sure TTuser can do anything for that.

As for HD trafic it is only for GO X40 and with a new paying subscription (with an HD receiver and a SIM card inside) and it will never work with gox20/gox30 with this navcore. In this future HD trafic all services will be payed (weather, ...).

You`re right mate. I`m also a x20 user and here`s the bad news for us. :dance2:But i`m happy because my x10 works perfectly.


:partyman:zerebede

Hi

Anyone with a go510/710 tell me which loquendo tts files they have used with this version as I cant seem to get it working now with English Kate


ta


DracUK

U need LoquendoTTs version 7.

Thanks for the reply,where can I find v7


cheers

http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111

http://www.anonym.to/?http://rapidshare.com/files/157508972/LoquendoTTS.rar
Working Kate GB v7 (x30) folder courtesy of lamboman

yDG

not anymore .......

@zerebede

i 've found a mistake in your image
TT GO 940 has got FM transmitter

http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111


Ive got them files and the original Loquendo folder but cant seem to work out which files I need


Drac

d/l the cab file (s) required and the x30LoqTTS rar to start.
in example, am using Kate GB...

extract all archives.
make new folder called LoquendoTTS.

http://img134.imageshack.us/img134/4636/loqttsef8.jpg

http://img252.imageshack.us/img252/5118/newloquy8.jpg

open Voice folder & copy the files & from here to your newly created LoquendoTTS folder.

http://img135.imageshack.us/img135/3307/loqvoiceid4.jpg

Now, open x30_LoquendoTTS folder and copy folders to your new LoquendoTTS folder too, allow overwrites.
Must do this last, as its the patch.

http://img89.imageshack.us/img89/1773/loqpatchcn6.jpg

copy your LoquendoTTS folder to root of SD ( for 510/710 ) model.

For extra voices, copy then into the LoquendoTTS folder as above and RE-APPLY the x30_LoquendoTTS patch once again.

yDG

Hi

Anyone with a go510/710 tell me which loquendo tts files they have used with this version as I cant seem to get it working now with English Kate


ta


DracUK

I use Loquendo v700 on my GO 710 (portuguese&spanish)

zerebede

@zerebede

i 've found a mistake in your image
TT GO 940 has got FM transmitter


Yes but is just for music not for instructions. As you can see on this navcore the option for instruction`s not available.


:wave:zerebede

d/l the cab file (s) required and the x30LoqTTS rar to start.
in example, am using Kate GB...

extract all archives.
make new folder called LoquendoTTS.

http://img134.imageshack.us/img134/4636/loqttsef8.jpg

http://img252.imageshack.us/img252/5118/newloquy8.jpg

open Kate folder & copy the 2 files (default.session & LicenseCode7.txt) & 2 folders (bin & lib) from here to your newly created LoquendoTTS folder.

http://img135.imageshack.us/img135/3307/loqvoiceid4.jpg

Now, open x30_LoquendoTTS folder and copy 2 folders (bin & lib) to your new LoquendoTTS folder too, allow overwrites.
Must do this last, as its the patch.

http://img89.imageshack.us/img89/1773/loqpatchcn6.jpg

copy your LoquendoTTS folder to root of SD ( for 510/710 ) model.
Overwrite as required.

For extra voices, copy then into the LoquendoTTS folder as above and RE-APPLY the x30_LoquendoTTS patch once again.

yDG


Thanks very much m8 now sorted thanks to you

:urtheman:

DracUK

---------------------------------
U need adapted \ASR folder (automatic speech recognition) with your map.
---------------------------------

Can anyone tell me were i get the adapted ASR folder from?

Everything is working great with my 720 unit. I just cant get the ASR to work properly, I press the Mic button but it does'nt recognize any commands.

thanks :good2:

Can anyone tell me were i get the adapted ASR folder from?

Everything is working great with my 720 unit. I just cant get the ASR to work properly, I press the Mic button but it does'nt recognize any commands.

thanks :good2:
Best place is from the download on Page1
http://www.ipmart-forum.com/showpost.php?p=2327090&postcount=1

download the .dlc, use jdownloader or crypto, asr folder in the download.

Should be in here also
http://rapidshare.com/files/158486265/TTusers.8.203.9717.rar

yDG

Hi all,

NC 8.203 works fine on my 510. No reboot on this version (many reboot with 8.201).
TTS, ASR, TMC, MP3, BT etc ... All is ok, except the speed cams: some of them are correct, but some others isn't shown or shown in the wrong way ....
It's strange. :confused:
Maybe the v8.20x has a new format of the file given by the excellent The Maverick ...
wait and see :D

Can someone explain me how to change bootloader? My ONE v2 uses 5.5012 but it seems some users are using the latest 5.5106. what are the diferences?

Geart work TTUser!

thanks ;)

first remove the file called system from your sd card. Next copy the file named system5.5016 to your sd card then rename it to system then reboot and it should update.

Just finished testing my ONE v2 and everything fine except latitude and longitude features.
I don't now how to activate TTS so I can't say its results.

first remove the file called system from your sd card. Next copy the file named system5.5016 to your sd card then rename it to system then reboot and it should update.

thanks for the quick reply lamboman but I don't see any file named "system" on my SD. are you sure that's the way to change boot?

Just finished testing my ONE v2 and everything fine except latitude and longitude features.
I don't now how to activate TTS so I can't say its results.



thanks for the quick reply lamboman but I don't see any file named "system" on my SD. are you sure that's the way to change boot?


If you don`t have system on your SD, just copy the file system5.5106 into SD, rename it to system, reboot your TT and that`s it.

Ps: check if you have battery enough to do it (no interruptions allowed)

:partyman:zerebede

If you don`t have system on your SD, just copy the file system5.5106 into SD, rename it to system, reboot your TT and that`s it.

Ps: check if you have battery enough to do it (no interruptions allowed)

:partyman:zerebede

thanks mate, but is it safe to change boot? to "upgrade" it?

thanks mate, but is it safe to change boot? to "upgrade" it?

We never know, but if you wanna have bigger SD you better update. It`s a risky thing but we do it:pmpl:. It´s the same risk of upgrade a pc bios.

PS: there´s no return after upgrade it

:wave:zerebede

We never know, but if you wanna have bigger SD you better update. It`s a risky thing but we do it:pmpl:. It´s the same risk of upgrade a pc bios.

PS: there´s no return after upgrade it

:wave:zerebede

---------------------------------------------------
best bootloader is v 5.5022
tested without any problems...
last bootloader v 5.5106 is for micro SD slot on Go X40
and v 5.5105 is a risky one version.
-----------------------------------------------------

Hi folks,
anyone tested Media Center or any other 3rd party apps on this NavCore version? Everything seems to work much faster on my TT One v2 except Mobilnova Media Center. Buttons are not responsive, just like TTUser mentioned in his directing post...
Hopefully there is a workaround, othervise I have to stick to 8.051....

---------------------------------------------------
best bootloader is v 5.5022
tested without any problems...
last bootloader v 5.5106 is for micro SD slot on Go X40
and v 5.5105 is a risky one version.
-----------------------------------------------------
I've changed boot to 5.5106, and now problems to report so far.
regarding the navcore I can't use tomtom plus acount features anymore, anyone with the some problem?

thanks mates ;)

Best place is from the download on Page1
http://www.ipmart-forum.com/showpost.php?p=2327090&postcount=1

download the .dlc, use jdownloader or crypto, asr folder in the download.

Should be in here also
http://rapidshare.com/files/158486265/TTusers.8.203.9717.rar

yDG

Thanks yDdraigGoch works great!

:urtheman:

I've changed boot to 5.5106, and now problems to report so far.
regarding the navcore I can't use tomtom plus acount features anymore, anyone with the some problem?

thanks mates ;)

Extract "bton" from "Switchfiles" to the root of your device(or remove "btoff")

Extract "bton" from "Switchfiles" to the root of your device
-------------------------------------------
Account feature does not works (idem all TomTom Services and Trafic)

--------------------------------------------

Extract "bton" from "Switchfiles" to the root of your device(or remove "btoff")

BT is already on by default as i'm able to turn it on in the menu, and detect cellphones nearby.

-------------------------------------------
Account feature does not works (idem all TomTom Services and Trafic)

--------------------------------------------

So in't there any work around or solution to solve it? Everybody using this navcore or craked navcores is unable to connect tomtom plus services and traffic?

Have installed the new navcore and bootloader on a Go700, no problems other than those already known. It does sometimes freeze the device (only with x40 emu) when the usb is plugged in when the device is already on, but this can be easily avoided if you plug in the usb cable before you switch on the device.

bt is already on by default as i'm able to turn it on in the menu, and detect cellphones nearby.



So in't there any work around or solution to solve it? Everybody using this navcore or craked navcores is unable to connect tomtom plus services and traffic?

----------------
yes
---------------

Hi all,

NC 8.203 works fine on my 510. No reboot on this version (many reboot with 8.201).
TTS, ASR, TMC, MP3, BT etc ... All is ok, except the speed cams: some of them are correct, but some others isn't shown or shown in the wrong way ....
It's strange. :confused:
Maybe the v8.20x has a new format of the file given by the excellent The Maverick ...
wait and see :D

Doesn't this Navcore (just as the previous one) suck your TTG510 battery like crazy?, even when you switch it off? :confused:

Does anyone know where i can find the switch file for FM out to car radio???
When i change it to play in the car it doesnt work!!!

Any help would be appreciated thanks!!!

In navcore 8.203 the GPS driver is 1.20, in previous navcores is 1.21.
Whereas with the driver 1.21 the fix to satellites is much faster (my personal test), is possible update it? Thanks a lot.

Does anyone know where i can find the switch file for FM out to car radio???
When i change it to play in the car it doesnt work!!!

Any help would be appreciated thanks!!!
I assume you have x20 device...post 1 by TTuser says:Known Errors
x20: FM, Lineout

Keep checking post 1 as TTuser does update/edit them and a fix may appear....

:ilove:

In navcore 8.203 the GPS driver is 1.20, in previous navcores is 1.21.
Whereas with the driver 1.21 the fix to satellites is much faster (my personal test), is possible update it? Thanks a lot.

http://www.ipmart-forum.com/showthread.php?t=290459

the gps Version have nothing to do with the installed Navcore, it is also locked in the Device how the Bootloader
this version display it also again wrong

just on 910 not working why ???????????????????????????????

Yes why not GO910 ??????????

toli1980,
incar

If we know the answer, you wouldn’t have a reason to ask this question. ;)

TTuser works on this problem.

BT is already on by default as i'm able to turn it on in the menu, and detect cellphones nearby.



So in't there any work around or solution to solve it? Everybody using this navcore or craked navcores is unable to connect tomtom plus services and traffic?

Sorry wrong answer. (edited)

:ilove:zerebede

@zerebede
@sl00

with this navcore there is no mean to see your feature account
and to connect to any tomtom services available or tomtom trafic via bluetooth gprs wireless connexion with subscription (u can only use for trafic RDS/TMC with a device)
Very sad...

Hi all,
could that be possible that the reason why the latest navcore doesn't work with the go910 is that the 910 is the only one to have an hard drive. Maybe, the navcore doesn't mount the harddrive.

With this navcore, I am not able to set my data account for my phone and so I can't get any of the services.

Is that a known problem or did I fail to do something?

Thanks for any help.

When my 720 was just as well have Bluetooth, then leave again and looking after equipment, which has so worked for me.

On TTONEXL is ok, expect a strange behavior: favorites lost names, overwritten with the address. If i change it, at the next reboot address still ovewrites the name.

With this navcore, I am not able to set my data account for my phone and so I can't get any of the services.

Is that a known problem or did I fail to do something?

Thanks for any help.
---------------------------------------------------
yes it's a (sad)...) known problem
impossible to set a data account and so to get all tomtom services and trafic via gprs mobile bluetooth with subscription (but trafic via RDS/TMC device is OH)
---------------------------------------------------

@zerebede
@sl00

with this navcore there is no mean to see your feature account
and to connect to any tomtom services available or tomtom trafic via bluetooth gprs wireless connexion with subscription (u can only use for trafic RDS/TMC with a device)
Very sad...

I live on the bathroom of the europe so it means that i don`t have HD traffic etc. etc.. The thing that bothers me in this navcore is: waste to much time to connect with the phone. I`ve tried to connect to tomtom plus but the answer was: error connecting to the server try again later.

:partyman:zerebede

@zerebede Gprs trafic via bluetooh mobile

u were in x30 or X40 emulation ? For me in x30 emulation u get an error message and in X40 emulation u get nothing working..

@zerebede Gprs trafic via bluetooh mobile

u were in x30 or X40 emulation ? For me in x30 emulation u get an error message and in X40 emulation u get nothing working..


I`m on x40 on GO 710.:nod:


:partyman:zerebede

i have a Go 710 i have try to install the X40 with last Navcore 8.203.9717 and my tomtom start ok but say no maps i have put Western_and_Central_Europe_V720_1803 in my sd card . need i to pathch the system or is any trick how to install the software in phone thanks for you answers ..

TomTom are offering a download of this version of Navcore that is said to work on X20 models here:

http://download.tomtom.com/sweet/navcore/navcore_8.203.9717.go940.cab

I've not tried it myself yet though.

wtf are you posting here:confused: its the same what we here already have and use, its official nothing for x20 how you can easy see ..go940.cab

TomTom ONE 3rd Edition (w/modded external Kingston 2GB microSD)
Boot 5.5022
NA v810.1907
dummy speech files
btoff, x30

Anyone get this working with VocalizerTTS? If so, how????

TomTom are offering a download of this version of Navcore that is said to work on X20 models here:

http://download.tomtom.com/sweet/navcore/navcore_8.203.9717.go940.cab

I've not tried it myself yet though.

This is for 940 as said.. The 740 version works better for 720.

This is for 940 as said.. The 740 version works better for 720.

What have you noticed?

i have a Go 710 i have try to install the X40 with last Navcore 8.203.9717 and my tomtom start ok but say no maps i have put Western_and_Central_Europe_V720_1803 in my sd card . need i to pathch the system or is any trick how to install the software in phone thanks for you answers ..


Put the same map version 810.1940 and patch the map.


:good2:zerebede

What have you noticed?

I have noticed that the 740 is NOT a 940 so therefore the software made for the specific hardware number would run better or hardware that is a closer match

I have noticed that the 740 is NOT a 940 so therefore the software made for the specific hardware number would run better or hardware that is a closer match

I have tried both the 940 and the 740 versions and there is no difference!

So did anybody figured out why HD Traffic / GRPS Traffic do not work with 8.2???:confused:

TomTom ONE 3rd Edition (w/modded external Kingston 2GB microSD)
Boot 5.5022
NA v810.1907
dummy speech files
btoff, x30

Anyone get this working with VocalizerTTS? If so, how????The last navcore version I can get to work with vocalizerTTS is 8051, the 82** causes the speech to disappear until a system reset. I put this down to insufficient free memory for its operation

I have tried both the 940 and the 740 versions and there is no difference!

Well done....???

The 740 hardware is a closer match to the 720 than the 940. I was just saying that because of this it would be better to use the version that is more specific and may cause less problems. I am not interested in what you have tried or what they are like. I was just trying to say that its better to use the navcore for the closest match to your hardware.


If it was released officially would you rather use a cracked 8.203.9717 for the 920 rather tham the official downloaded from home version for your own 720 device????

The last navcore version I can get to work with vocalizerTTS is 8051, the 82** causes the speech to disappear until a system reset. I put this down to insufficient free memory for its operation

Danke. Me wanted make sure not me.

Hi TTuser,

Thanks for your UL.
My device is 720 and installed the NV82039717. The FM transmitter is not working, and also the SDK is not stable.
How can v improve them ?

Is there any new patcher coming out ?

it's known that FM transmitter does not work with this navcore x40
see ttuser page 1

Please help me. i installed x40 Navcore 8.203.9717 on my tomtom go 500. everything is working fine. But i cannot find Tom Tom Services in the menu. I am using tomtom Speed camera database. I am getting warning, when i reach a camera. But i cannot find the menu to customise it. Please help me

well i have the same issue
the speed camera menu has been hidded in the 8.203
i asked so does biddave but we didnt get any answer
i would say wait

Please help me. i installed x40 Navcore 8.203.9717 on my tomtom go 500. everything is working fine. But i cannot find Tom Tom Services in the menu. I am using tomtom Speed camera database. I am getting warning, when i reach a camera. But i cannot find the menu to customise it. Please help me
Try to put "bton" file to the root of your Tomtom(you find the file from Switchfiles).

Under 8.203.9719 I have the speed camera menu under the TOMTOM services menu .. Is this menu missing . All customising options are there

Does anyone know where i can find the switch file for FM out to car radio???
When i change it to play in the car it doesnt work!!!

Any help would be appreciated thanks!!!

There is no provision for FM transmitter in 540 or 740, it is only available on the 940 model. Until work can be carried out on this model, it is unlikely this functionality is likely to work.

Oh I hope that happens soon as I miss it on my 720.

According to TT, they removed FM transmitter from 540 and 740 before very few users make use of it!!! Really, I wonder who they asked. I use it all the time and have many albums on my unit when travelling and prefer the sound through the car speakers. When I get home tonight, I will upload the similarities and differences tonight on rapidshare - makes interesting reading!!!

Try to put "bton" file to the root of your Tomtom(you find the file from Switchfiles).

This was indeed the solution for TT-One to make the Live (TT-services) functions available again. So assumingly it'll be the solution for other models also.

to see "TomTom Services" with fuel prices and speedcams with nc 8.203 you have to go to settings and then to page 8. there is something like "show less options" or "hide options" or something like that. click on it. and then you go into the main menue on the second side. and there is :-)

There is no provision for FM transmitter in 540 or 740, it is only available on the 940 model.

Is this the only hardware difference between the 940 and the other two models? And the only software difference is the maps the unit comes with?

I ask because I presume I could just buy myself a GO540, saving me ~£60 on the 740 and just use the Full European/USA maps I got from here.

Dabs.com are selling the 540 for only £262 which would make it quite an appealing buy...

Is this the only hardware difference between the 940 and the other two models? And the only software difference is the maps the unit comes with?

I ask because I presume I could just buy myself a GO540, saving me ~£60 on the 740 and just use the Full European/USA maps I got from here.

Dabs.com are selling the 540 for only £262 which would make it quite an appealing buy...

Thought these two presentations would help you determine which is going to do the job for you

http://rapidshare.com/files/161272133/External_presentation_GO_X40_LIVE_UK__NXPowerLite_ .ppt
http://rapidshare.com/files/161272132/GO_LIVE_Presentation_-_Distribution_September_2008.ppt
Assuming you have powerpoint

Is this the only hardware difference between the 940 and the other two models? And the only software difference is the maps the unit comes with?

I ask because I presume I could just buy myself a GO540, saving me ~£60 on the 740 and just use the Full European/USA maps I got from here.

Dabs.com are selling the 540 for only £262 which would make it quite an appealing buy...

You could look here (http://www.tomtom.com/products/category.php?ID=0&Language=1&TT=7a1281a3%3Ababa37bd%3A00000000%3A00000000%3A000 00000%3A00000000%3Avnf3rcvt76tc2vd743cd95vig2) for differences between models

540=1GB flash mem,regional map
740=2GB flash mem,European map (at least it is here!)
940=4GB flash mem,loadsa maps and EPT hardware+FM
and they're all using micro sd's now.
For any other info on their spec just go to:
http://www.tomtom.com/products/product.php?ID=712&Category=0&Lid=1

:ilove: doh,bit slow there...

Thanks maverick/sco0ter/terrytpot, that was very useful information.

One further question if you don't mind, does the x40 Navcore 8.203.9717 support MicroSDHC cards. The information here (http://uk.support.tomtom.com/cgi-bin/tomtom_uk.cfg/php/enduser/std_adp.php?p_faqid=2634&Lid=1) (and in the powerpoint presentation) tells me the x40 supports microSD and the x30 SDHC, but no info on MicroSDHC. From what I gather from this thread (http://www.ipmart-forum.com/showthread.php?t=247001&highlight=MicroSDHC+tomtom) a 4GB microSDHC card would probably be OK.

Thanks again.

Try to put "bton" file to the root of your Tomtom(you find the file from Switchfiles).

Yes that was the solution. i had btoff and bton switch on the root. i removed btoff file and i got the option tomtom services.

thanks masahi

got it all running sweet on my 720, has anyone managed to get the fuel prices updated through tomtom home? I can search and everything but just need it to update all the prices.
cheers

got it all running sweet on my 720, has anyone managed to get the fuel prices updated through tomtom home? I can search and everything but just need it to update all the prices.
cheers

I think its LIVE service only.. You need a subscription as well

I think its LIVE service only.. You need a subscription as well

I think so too. Everything else works except traffic and fm transmitter, but mp3 and photos etc work through internal speaker

You missed a bit off there mav,dont think anyones got the google button to work yet as thats also part of the live stuff.More importantly,has anyone got tomtom services working using this yet? I wouldn't have thought so as if you're using a patched navcore chances are you're using a cracked map and thats not the sort of thing we like to be telling tomtom is it!

:ilove:

You missed a bit off there mav,dont think anyones got the google button to work yet as thats also part of the live stuff.More importantly,has anyone got tomtom services working using this yet? I wouldn't have thought so as if you're using a patched navcore chances are you're using a cracked map and thats not the sort of thing we like to be telling tomtom is it!

:ilove:

I took it as read that no one has google working since the other bits also requiring GPRS do not work, presumably for the reason you already mentioned elsewhere. Btw I thought their prices were a bit steep to say the least. Soon as it works, i'll be an instant convert, but for now, I need gprs working when driving so its back to 930 emu on 8.011 and miniscule gprs p/m (pence/month). Heyho

Concurr that tt prices are a bit steep,but then so was gprs data charge on my phone contract when I could get the bleeping thing working (even on official nav and map) so I stumped up for rds/tmc antenna hence happily playing with 8203. Downside,just found out that even lineout to my fm transmitter dont work doh....

:good2:

someone has succesfully installed this version on TTgo 910?

tnx
wipo

it is still necessary to be patient, because it still does not work for our GO910.

someone has succesfully installed this version on TTgo 910?
tnx
wipoIt could be a long wait for 910 to have this.
Driver support for 20GB drives appears removed from system,
..hence will energise/power up....but not read/write.

yDG

thank you very much guys for your quickly reply :)

I will wait for!!

Dabs.com are selling the 540 for only £262 which would make it quite an appealing buy... I just got a 730 Traffic from Dabs for £161+vat because the box was damaged.. Was about time I upgraded my Go500. \o/

zerebede, why dont you see if you can find any bigger picture to use,that one still fits in the cab of my truck...just!

Installed the stuff om my TomTom One 4N00.001

app 8.203 GPS v1.20 Boot 5.5106

known bug Zipcode, Latitude Longitude but also

no delete possible from Favorites (rename OK)

but even i get a fully operational subscription to tomtom trafic gprs via wireless bluetooth mobile, i can't access tomtom services and tomtom trafic ! under navcore v 8011/8011/8051 there is no problem.

Installed the stuff om my TomTom One 4N00.001, app 8.203 GPS v1.20 Boot 5.5106
Kabake I cannot get this to run on my 4N00.003. It doesn't get past the splash screen. Can you link me (upload) an image file for my SD card? Clueless... Thanks...

Hi and sorry for my English.

"It could be a long wait for 910 to have this.
Driver support for 20GB drives appears removed from system,
..hence will energise/power up....but not read/write."

I have a go910 and i changed the HDD 20GB to a SanDisk Extreme IV CompactFlashCard.

It works perfect with Navcore 8.016 and 8.011

for 8.2 I have some questions.

Is it nesecary to install drivers vor this card?

Do I have to tell my go that ther is no HDD anymore?

Can I tell my go there is a SD or a micro SD Card inside?

I hope the Questions are not to stupid

Thanks for the help

Nomos

try it simple out, it can only works or not works, nobody know exactly why it now not works for a 910, i say it works also not:afraid:

My TT1v3 works fine with 8203 w/o TTS. The problem I have is when TT1v3 try to resume from suspend mode (power off), TT1v3 screen is freezed, after 20 seconds, TT1v3 automatically restart.

Did any one have this problem?

My TT1v3 works fine with 8203 w/o TTS. The problem I have is when TT1v3 try to resume from suspend mode (power off), TT1v3 screen is freezed, after 20 seconds, TT1v3 automatically restart.

Did any one have this problem?

Yes, same for me, but after a few upstarts everything works ok. When i disconnect from PC, i use TomTom Home: Device-->Disconnect devise and this problem does not appear.

Just to say that this navcore is working fine on my 520.

Bootloader 5.5106
Internal memory : navcore + official 720 map
SDHC card : several 810 maps
No switch
No outsourced.bin
x40 emu ok

My favourites have lost their names, they only have street names now. Nothing serious I will rename them later.
But no reset or strange behavior compared to 8.201 :triodance:

Just to say that this navcore is working fine on my 520.
Internal memory : navcore + official 720 map
SDHC card : several 810 maps
No switch
No outsourced.bin
x40 emu ok

My favourites have lost their names, they only have street names now. Nothing serious I will rename them later.
But no reset or strange behavior compared to 8.201 :triodance:

You may like to convert your favourites to a poi category. No nasty surprises and you can of course have a phone number with it then. I find this way is more convenient for me. That way I can copy the same poi file to all maps and keep all up to date easily. So my friends in Singapore, USA and Europe are contained in one poi called Mine.ov2, though it might be better to call it something like 0mine so it always appears at the top of list (I just thought of that - not tried)

I was just opening the file in PoiEdit :LoL:

Renaming Favorites did not worked for me :( (after reboot only street names again)
I returned to 8.011 - much faster fix, FM, etc.

Renaming Favorites did not worked for me :( (after reboot only street names again)
I returned to 8.011 - much faster fix, FM, etc.

Much easier to do away with favourites and use poi instead - much more portable and more information can be held

Could someone teach how to make light sensor working?
I am 720 user and already install Navcore 8.203... everything work (except fm, line out)
but can't get light sensor working.... trying to read all the post here.
someone shows using model.txt... but I can't find this file on my tt at all.
where should i copy this file and how?
Please advise... sorry for the stupid question.

Could someone teach how to make light sensor working?
I am 720 user and already install Navcore 8.203... everything work (except fm, line out)
but can't get light sensor working.... trying to read all the post here.
someone shows using model.txt... but I can't find this file on my tt at all.
where should i copy this file and how?
Please advise... sorry for the stupid question.

Look in post #1 at changelog.

First post - first stupid question. Read the posts before posting in future

Look in post #1 at changelog.

First post - first stupid question. Read the posts before posting in future

Thank you so much for your reply.
I will try to read in #1 post again.
for rookie like me, it's really hard to know how to do like your kind of expert.
Thank you, if there is more detail instruction will be appreciate.
you guys help is the power of this forum.
:thanks:

........... :sorry:

I have a go910 and i changed the HDD 20GB to a SanDisk Extreme IV CompactFlashCard.

It works perfect with Navcore 8.016 and 8.011

for 8.2 I have some questions.

Is it nesecary to install drivers vor this card?

Do I have to tell my go that ther is no HDD anymore?

Can I tell my go there is a SD or a micro SD Card inside?

I hope the Questions are not to stupid

Indeed, not stupid at all, just cautious approach.

The first thing to note is you swapped out the HDD. Great idea! (isn't this usually a 700 mod?)
The next thing to note is that 8.016 & 8.011 work! Excellent!

No, you cannot install drivers - they are precompiled within the system software.
No to telling it there is no HDD - it has no drives so doesn't care.
No to telling it there is CF card - if the driver support is there, it knows already.

As TTuser suggests, load it & see what happens.
Then post your findings here.
Nothng fancy, a simple "Yay! It Works" or "Pants! No Go!" would do.
Also, suggest go for 8.203 as 8.201 is more of a 'beta' or 'test' release.
Have to say i never got so far as removing/swapping my HDD, so 10/10 for this, Nomos
Reaching for the torx screwdrivers........

yDG

Yes, same for me, but after a few upstarts everything works ok. When i disconnect from PC, i use TomTom Home: Device-->Disconnect devise and this problem does not appear.

I have no luck to make it works. TT1v3 still can not resume from suspend status quickly, it always does a restart cycle after power on.

I have one small request to all posters reading and editing this thread. Does anybody can insert one screenshot from TT showing map in normal view 3D during navigation?

I have one small request to all posters reading and editing this thread. Does anybody can insert one screenshot from TT showing map in normal view 3D during navigation?

Hello
the map in 3 D seem the same so there is no different
only the Main menu is different

would you please let me know if name of next road/street is shown on the bottom of screen or on the top of screen in "blue/green field" ???, you know, we have long street names in Poland and sometimes name in the top of the screen is not visible (too small letters)

New Navcore 8.300
http://www.meintomtom.de/content/n/315/Die-aktuellen-Firmware-Versionen.html

zerebede, why dont you see if you can find any bigger picture to use,that one still fits in the cab of my truck...just!


:pmpl: Sorry about that. It was my first picture on the forum.:sorry:


:wave:zerebede

hello, i have a one xl with sd card 2Gb.
I try to use with navcore 8.203 boot 5.5106, but i have a problem with sound.
I must put the sound at 10% or it 's very heavy/loud !

With navcore 8.51 it's ok, but not with 8.201 or 8.203. All functions seems to be ok but not the sound.

Can someone help me ?

Thanks for your help.
Bye

Kabake I cannot get this to run on my 4N00.003. It doesn't get past the splash screen. Can you link me (upload) an image file for my SD card? Clueless... Thanks...

I use the one from TTuser from the well known servers, it can take 2 minutes long to pass the startscreen....

i make this new post to tell to others with the same pb as me, that we just need to unpack switchfiles, and reboot. And the sound is nice now.
I'll try tmc traffic tomorrow.

But which emu with a one xl ? here, it's xls, is it the right one ?

Bye

[QUOTE=mikelaf;2353525]hello, i have a one xl with sd card 2Gb.
I try to use with navcore 8.203 boot 5.5106, but i have a problem with sound.
I must put the sound at 10% or it 's very heavy/loud !

With navcore 8.51 it's ok, but not with 8.201 or 8.203. All functions seems to be ok but not the sound.

Can someone help me ?

Yep, TTuser maybe. It's a known bug, see the 1st item in the th:idol::idol:read.
Older versions are OK, so you can switch to these beauties.

Thanks for providing! Work like a charm!

Navcore 8.300.9732 MU Mirrors:


it's the v8.203.9717 topic, guy

Hi guys...
Has anybody tried navcore 8.203 rev1.1 on go720 or 920 yet???
How it works??Is it better from first version???

With my go 520, the FM transmitter is OK now, but the light sensor is still dead.

TomTom GO910 works perfectly with navcore 8203 and the new ttsystem rev1.1 with Outsourced.bin
Current x40 Emulation
Bt on
Fm on
ttuser thank you for this excellent work !!!
grard31

:urtheman: :urtheman:

:thanks:

There was a update today to 8.204.9718

1.Post now also 2 x 8.204 ttsystem, one "original" and one for x20,x30,910 (x10) with this one seems Bat. Problem by x10 also gone
the 8.203 rev.1.1 should theoretic better works for x20,x30 and at all for 910

i see now the old 8.203 readme was not 100% right:afraid:

x40 users (not me) have been offered the 8.204 (don't know the last four digits), anyone know?

8.204.9718
TTUSer patched & posted it already.....
OMG, today it's really hard to keep up, 8.300, 8.203Rev1.1, 8.204.
When I try one, another already pops up :)

TTuser
:urtheman:
It works on my go910 with CF-Card

Navcore: 8203
Bootloader: 55105
Map: WCE 810.1907

without Outsourced.bin 3.0 MB free :hahaha2:

Street Test tomorrow

Thanx Nomos

:ilove:

@yDdraigGoch
did you get my answer

Link to TTUSER's 8.204.9718 files from dlc

http://www.savefile.com/files/1882341 (http://www.anonym.to/?http://www.savefile.com/files/1882341)

grard31

What version of bootloader do you have?

I did a quick test of new ttsystem version 8.203 rev. 1.1 and version 8.204.9718.
No luck on my TT910. It freezes after boot screen.
I will try to test new ttsystem on clean TT.

grard31

What version of bootloader do you have?

I did a quick test of new ttsystem version 8.203 rev. 1.1 and version 8.204.9718.
No luck on my TT910. It freezes after boot screen.
I will try to test new ttsystem on clean TT.

Bootloader= 4.86
8.204.9718 is OK on my GO910
grard31

447104

My GO910 with navcore 8.204

:thanks: ttuser
grard31
:urtheman:

TT GO 910, Bootloader 5.3006, all OK, except this found strange bug :

- if i select vocal input, all works, but the sound interact is'nt a voice, but a beep...

- if i would to connect to pc, i must off the TT, put on dock, and start....
If i put on dock normally, it's restart.....

-when i start my tomtom, it takes more than 60 seconds to start the first road screen...Is normal?

- where is the button for more command input vocale, not only for the calculate road?
All the commands lists are in the preferences...

- in the model.txt, i put x40, is correct?


Thank you very much, sorry for my bad english.

Can anyone confirm how well NC8.204 works on a GO700 as I'd like to be able to use the latest V815 maps and have tried NC8.300 but it freezes.

If anyone has got NC8.204 to work please advise the best settings to use.

Can anyone confirm how well NC8.204 works on a GO700 as I'd like to be able to use the latest V815 maps and have tried NC8.300 but it freezes.

If anyone has got NC8.204 to work please advise the best settings to use.

Yes GO700 work with navcore 8.204

:thanks: ttuser