Known Errors (Experiences valid for my 710):
old Remote still dead (this mean the "NOT BT" Remote);
no "poweroff" more possible (the angry Watchdog barks always and the Device wake up again);
SDK Programs which need Touchscreen works not more;
Pc-Connection freeze it;
x20 TTS Voices works not;
only x20, x30 Emu. available; all other not available or broken
Original for Device: x20, x30, 630


TT Site says:
Version 8.300
(TomTom GO x20 and x30 series only)

* Support for IQ Routes 24/7 data (map version 8.15 or higher required)
* Support for SDHC cards (8GB and higher)


You need to download:
Have you nothing:Basicpack+ SE_ttsystem.8.300.9732.rar
update you already through Home to 8.300 replace only ttsystem
ASR Folder for Voice Input is equal to 8.201 or 8.203/4
x30 Voices (http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111)

all Features, Function, use similar as already known, read readme for exact Infos

Changelog:
16.01. 8300 rev1.5, 8320 rev1.2: possible easier to use switchfiles
04.01. 8300 rev1.4, 8320 rev1.1: advanced Onscreen Messages; advanced "runcheck"; fixes for not intended(irrelevant) Behavior
13.12. 8.320 T (http://download.tomtom.com/sweet/navcore/navcore_8.320.9901.gox20.cab)T (download.tomtom.com/sweet/navcore/navcore_8.320.9901.go530-go730-go930.cab) Work Navcore; all Files are equal except data.chk which is included;....mappatch.rar is clean only patched for Maps
30.11. rev1.3.3: 1 fix; 1 new Helptext ; 1 new Feature (http://www.ipmart-forum.com/showpost.php?p=2395398&postcount=659)
29.11. rev1.3: fix a few unimportant Issue
22.11. rev1.2: extended Outsource; Boothelpmessage disabled, switch on with viewmsg; other minor Improvements
16.11. rev1.1: revised cleaning, rm, btoff, etc. take no effect without runclean, this works now separate

Cleaning now reversed, Standard disabled, because original is there no cleaning more, switch it again on with "runclean", with Outsourced.bin almost useless to run a cleaning

Now only as .dlc ,you can use
http://jdownloader.org/download/index

IQRoutes v2 and enhanced ALG (more junctions) work on 810.1934 UK and ROI

As always TTUser is the best!

But...... where is the link for TTNav 8.3 ???

EDIT: Ops! Find it! Works perfect on my Go520! :urtheman:

How enable x30 Emu on Go920?

:thanks:

Freezes on my TTOne V2 when I touch the screen to enter the menus.
(Using Outsourced.bin)
Tried with and without switchfiles; BTOFF / BTON / RM / RUNCLEAN / TTSOFF / MODEL (X20 emu - X30 emu) / VERSION (A:7900 / B:9180)


Strangely enough I can hit the screen on the lower place (left to change volume / Right to enter the page with statusview+version+details+copyright pages) this works without problem. But hitting the navigating part of the screen freezes the TTOne and causes it to reboot

I assume starting with this NavCore the lack of RAM (just 32MB) becomes a problem for TTOne ?

EDIT: Ops! Find it! Works perfect on my Go520! :urtheman:

Ehm where is it? I see only dlc... :thinking:


UPDATE: sorry I just learned what it the dlc file is for :oops2:

TTUSER , wich differance with other topic 8.3 ? (http://www.ipmart-forum.com/showthread.php?t=304949)
oups SE_ttsystem.8.300.9732.rar

Second Edition sorry

Any chance of someone mirroring the SE system file from post 1 please? Just spent an hour trying to download and use jdownloader and can't get my head round it. Third time I've tried in the last 3 months. Its too complicated for novices plus the download sites bombard your pc with adverts. Thanks in advance.

Does the IQ2 works in this version TTuser ?
unless i dont have the WEstern Europe map for IQ 2

Just for anyone who may download the Official files from TomTom.

I connected up my 720 (running patched 8.051) and TTHome (2.4, using patched 8.051 DLL file) insisted I update my device. It showed 7.450 Navcore, but I went ahead, as I already have the patched 8.051 and 8.300 files, in case it went wrong.

After installation, when I started up, it could not see any of my 'patched' maps, as it was an older version of Navcore. No problem.

I reset the device and plugged it into the computer and asked TTHome to update, and this time, it showed the 8.300 Navcore, so I allowed it to download and install.

This time, it kept saying I could not use the maps with this version or something like that.

I simply copied the patched 8.300 TTSystem file into my device, reset it and started up, and everything is working good at the moment.

BIG thank you to TTUser and everyone once again.

I will take the device for a drive a little later to see how it performs and report back.

So, for those of you who have x20 device and are offered the Official update, this information may be of some help.

Hi how to check in my 920 if I have IQ2 routes??
running 8.300 and UKand ROI 8.10.1870

Navcore 8.300.9732

Thanx TTuser.
Works great here (GO 720T).
:urtheman:

any chance of mirro the file pls ?

How enable x30 Emu on Go920?

:thanks:

Make a file called model.txt in the root folder
Inside that file write x30 or x20, which ever you want.
Simple

It works fine but the changedtxt.txt doesn't anyone has a solution i just like it to put my one txt in it

Hello TTuser

The save Ram mode is not working
Can you guys test the save mode Ram ?

MU Mirrors:

Home_dll_8-300-9732-1 http://www.megaupload.com/?d=4OHSCPBC

navcore_SE_8.300.9732_basicpack http://www.megaupload.com/?d=Y1FQ3E7I

ASR http://www.megaupload.com/?d=YKAKRCVM

SE_ttsystem.8300.9732 http://www.megaupload.com/?d=BODLSDY9

MU Mirrors:

Home_dll_8-300-9732-1 http://www.megaupload.com/?d=4OHSCPBC

navcore_SE_8.300.9732_basicpack http://www.megaupload.com/?d=Y1FQ3E7I

ASR http://www.megaupload.com/?d=YKAKRCVM

SE_ttsystem.8300.9732 http://www.megaupload.com/?d=BODLSDY9

Thansk Victor lee

Combined into ONE RS file

link: http://rapidshare.com/files/162764609/Navcore_8.300.9732.rar.html

good for 10 d/l's

re-u

the ttsystem from ttuser doesn't work on my go930

ok, now it works:urtheman:

:thanks: TTuser



http://i3.photobucket.com/albums/y93/ChillyCatz/dump1924061001.jpg


All seems to be working ----- including the supplied home.dll --Mapshares working

http://i3.photobucket.com/albums/y93/ChillyCatz/mapshare.jpg


:ilove:

how can i test the new IQ 2?

You need a Map with the IQ2 Data, and current know i only the UK 810.1934 Map from vickyl which works
plan a Route, if it ask you to enter a Date, Time then use you IQ2

:urtheman: :urtheman:
:urtheman: :urtheman:
:urtheman: :urtheman:

Thank's

it does not work on my Rider2
he starts - but If I click on the screen, then the screen is froze

ozbozz wrote:it does not work on my Rider2
he starts - but If I click on the screen, then the screen is froze

Same problem here with my one v2 with SD slot.
Is freezing when click on the screen and restarts it self.

great job wORKS ON MY 910:wave:

hoppsuisse where did you get the navcore 8300.9732 i canot fine the file

hoppsuisse where did you get the navcore 8300.9732 i canot fine the file

From #1st post..:)
It is in .dll file
To download use Cryptload or jDownloader

http://www.savefile.com/files/1881147
All 4 rar files
No wait, no max downloads

720 works great.

Drove a little mini-errand [20miles] and thinking the sat placement is more
accurate and snappier.

Also...really, really like that they cleared up the screens real estate and moved the street names to top of screen. Thats a GREAT improvement.

All Works

update mapshare
update quickgps

with navcore 8.3 and map W-C Europe full 810

:thanks:

why did tomtom deactivate fm transmition for instructions?? ttuser can you activate it?

Wooo ... perfect on a 720 ! (hopefully ;-))

thanks ! :urtheman:

hi there can anyone help me i just try to install in my tomtom 910 nav 8300 but i connot fine the way to confuze

hi there can anyone help me i just try to install in my tomtom 910 nav 8300 but i connot fine the way to confuze

Hello the 8.3 only for x30 x20 devices

Some one got the Patcher for 8.300? Cound not use 8.010 Patcher, did not work.

@xandesan
download file in the first post on this thread

Does not function correct on my One V2. Updates worls great but after that my One will freeze when trying to use it.

Does not function correct on my One V2. Updates worls great but after that my One will freeze when trying to use it.

????? 8.300 works on your TT-One v2 ????
Great to read, then there is hope for all other people (incl. me) whose TT One freezes when touching the screen.....
What did you install and how ? Just only the 3 rar files (or 4 incl. ASR) from TTUser ??

Ohhh you editted your message already..... sadly, was happy to read it worked for someone on a TTOne, but not

[I][COLOR="Silver"]????? 8.300 works on your TT-One v2 ????




Originally Posted by scorpiosoft
"Does not function correct on my One V2."

Originally Posted by scorpiosoft
"Does not function correct on my One V2."



LOL.............. ya just seen it Lessram

:D scorpiosoft's original message was there when I hit the quote button, but while my reply box was loading scorpiosoft already changed the message and the reply box quoted the new message.... :-)

Hello the 8.3 only for x30 x20 devices

All Navсores from TTuser are for all models of TT. This version 8.3 is also for all models.
Just read first post – TTuser tested it at TT 710.
However not all TTuser’s Navcores work properly at some models.
Navcore 8.2 and Navcore 8.3 at the moment don’t work at TT910.

::: DOWNLOAD HERE :::

Navcore 8.300.9732 :: All files ::


http://www.4shared.com/dir/7588244/1c3633e3/sharing.html

::: Another "mirror" :::

All Navсores from TTuser are for all models of TT. This version 8.3 is also for all models.
Just read first post – TTuser tested it at TT 710.
However not all TTuser’s Navcores work properly at some models.
Navcore 8.2 and Navcore 8.3 at the moment don’t work at TT910.

Fooling around a bit with 8.3 on my 910 and actually it does seem to work. I run in x20 emu mode. Sound is indeed (too) loud. No problem connecting device to pc. IQ routes and Lane Guidance working, as well as voice input. Lightsensor seems to work. Bluetooth Remote (not original) also works. Battery drainage I have yet to experience. Too early to tell.

hi nveede i did install 8.3 x20 emu mode on tomtom 910 but map no correct

Actually my map was 'pre-activated' as I used this map also with version 8.051. I used the Easytools. Try a search through the forum and you'll find these tools. Apart from that I just used the files offered by TTUser in the first post. Good luck.

when i go back to 8.051 work fine but not 8.3 ask for map activation

when i go back to 8.051 work fine but not 8.3 ask for map activation
Are you using cracked ttsystem with 8.300.9732?

where can i find cracked ttsystem

@ttuser

Many thanks, worth being patient for! Once again you rock. All working fine on my 920, as expected.

Upgraded my 520 but the phone address book is now broken. Just shows the numbers rather than the name, number type and number.

Mr-Maniac, maybe yuo can help me.

I have the TT GO 930, using on the memory card navcore 8.010 with patched maps, working but lost some features.
Once I do the upgrade via TT Home, I loose the patched maps.
Would like to be able to use navcore 8.300 with my patched maps.
Any suggestion?
Should I use a different patcher?
Thanks

Installed & patched nav 8.3 and appeared ok on g710 till I took it for test drive and in the middle of the run map colours from Australia_720.1868 disappeared with couple of blue and green roads only visible and sound always reppeats some thing like turn right at the round about....
Yes, battery doesn't last at all.

Same bad experience here on my TTOne v2.
It freezes while touching the screen....
:(

Another issue to report;
Hooked up g710 to tthome & after the tthome downloaded some files to operate the g710 my go710 refused to recognise the Australia_720.1868.

this is no Issue, it is total normal, what mean you for what is the patched dll

works fine on my 920 with Australia 720.1868 slightly longer boot time but apart from that everything seems to be working good thanks ttuser for your brilliant effort again

not working on TT1v3

toli1980,
nveede

What version of bootloader do you have at TT?

toli1980,
nveede

What version of bootloader do you have at TT?

5.5102

I will test driving in a few hours. On my desk it looks rather good, but battery drains rapidly.

TT One Xl + Navc.8.300....Map Central and Eastern Europe 810.1887 :
SE basicpack + SE ttsystem /x20,x30/ - OK; boot 5.5106,
IQRoute - OK.... RAM 0.1 max free ???
New map 8.15 Links..????:thanks:
http://img525.imageshack.us/img525/3715/dump395173764sz6.th.png (http://img525.imageshack.us/my.php?image=dump395173764sz6.png)http://img525.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
TTuser .. :thanks:

alex


5.5015

i install 8.3 on my 910 but when connect to tthome freez and restart anyone now why

TT One Xl + Navc.8.300....Map Central and Eastern Europe 810.1887 :
SE basicpack + SE ttsystem /x20,x30/ - OK; boot 5.5106,
IQRoute - OK.... RAM 0.1 max free ???

This is probably the cause of TTOne's to freeze when hitting the screen !!

Excellent work TTuser, I deleted all folders after backup then downgraded to 7.4 then updated to 8.3 then copied over TTuser's ttsystem file and my map folder and it worked straight away.

As others have noticed it is a bit slower to boot but that is ok.

TTuser you will get repute from me :urtheman:


Fatman350 (Oz)

Excellent work TTuser, I deleted all folders after backup then downgraded to 7.4 then updated to 8.3 then copied over TTuser's ttsystem file and my map folder and it worked straight away.

As others have noticed it is a bit slower to boot but that is ok.

TTuser you will get repute from me :urtheman:


Fatman350 (Oz)


How do you find/create the patched ttsystem file? I have read several pages, but this is unclear to me. I have Navcore 8.30 and 8.10 maps.

hi there
i instal it on my one xl en test it for a few days and i can say it work perfect no problems at all so long got updates no freezes on pc :excited:
tmc works perfect

thanx tt usser

from one xl ( nl )

:urtheman:

too bad for a Joke, what is it then

you read all and see not
in the attached dlc are the files hidden, and the Link above is a Program to load it
http://www.ipmart-forum.com/showpost.php?p=2354138&postcount=1
mirror1
http://www.ipmart-forum.com/showpost.php?p=2355011&postcount=17
mirror2
http://www.ipmart-forum.com/showpost.php?p=2355298&postcount=29
mirror3
http://www.ipmart-forum.com/showpost.php?p=2355533&postcount=44

is this all really not enough:confused:

How do you find/create the patched ttsystem file? I have read several pages, but this is unclear to me. I have Navcore 8.30 and 8.10 maps.

Mr-Maniac, maybe yuo can help me.

I have the TT GO 930, using on the memory card navcore 8.010 with patched maps, working but lost some features.
Once I do the upgrade via TT Home, I loose the patched maps.
Would like to be able to use navcore 8.300 with my patched maps.
Any suggestion?
Should I use a different patcher?
Thanks

I have my Navcore and all the files related to it on the Internal Memory, and ONLY maps on my SDHC-Card. Makes life a lot easier.

Then, when you connect with TTHome, select the Internal Memory device for updating/installing the new Navcore.

Don't let TTHome install Nacvore onto your Memory Card, as it will just confuse you, because you will have the Navcore software on the Memory card for no reason.

To make your existing 'patched' maps work with the new Navcore (8.300), simply copy over the 'patched' TTSYSTEM file (link available at the beginning of this post by TTUser) and overwrite the file on the Internal Memory. Then reboot.

That's all I did. :nod:


Bumpyjuice : I have replied to your PM.

Thanks guys,

I should have been more specific. I did not mean to frustrate anyone. :-)

I found out how to get the ttsystem file eventually, but it did not work. It caused my device to hang up.

How large is the patched ttsystem? It seems to be the same size as the original that came with NC8.30.

you should first use the original until you see "mapactivation wrong blabla" then overwrite it with patched ttsystem, size is almost equal, differ only a few byte

Thanks guys,

I should have been more specific. I did not mean to frustrate anyone. :-)

I found out how to get the ttsystem file eventually, but it did not work. It caused my device to hang up.

How large is the patched ttsystem? It seems to be the same size as the original that came with NC8.30.

Ok, I've just replied to your PM.

Follow the simple steps that the legendary TTUser has just mentioned, and you should be fine.

Hello, please Navcore 8.300.9732 and to work for the TT910 ??????????

Still no-one who got 8.300 to work on a TT-One ?? (Without freezing when touching the screen)

Not yet. I encountered same problems.

HI, I am trying to increase the sound on my gps, but all i get is 10%. little help?
I like to use my unit when i am biking or fishing.

Thanks for the files.

HI, I am trying to increase the sound on my gps, but all i get is 10%.


Are you using Navcore 8.300.9732 ??

The reason i'm asking...... is that it's a known fact that this version is SUPER LOUD. Seriously, you gotta turn this one way down to git rid of distortion.

Are you using Navcore 8.300.9732 ??

The reason i'm asking...... is that it's a known fact that this version is SUPER LOUD. Seriously, you gotta turn this one way down to git rid of distortion.

Yes ChillyCat, i am using 8.300 from this thread.
I see your point about the noise.

rep to you.

on my one v4. i can touch the screen on the voice and on the sinal of gps to see the version it´s ok, but on the part of the map to the menu it´s freeze any help?:thanks:

Hey guys, I have TT x20 model and was wondering if I needed specific x20 8.3 files or the files in Post #1 will work?

The reason I am asking because in Post #2
of http://www.ipmart-forum.com/showthread.php?t=304949 it has a cab file for x20 models?

I am really confused on what files I need and am hoping someone will help shed some light in this situation!

:oops2:

on my one v4. i can touch the screen on the voice and on the sinal of gps to see the version it´s ok, but on the part of the map to the menu it´s freeze any help?:thanks:

All TTOne's have this problem. There's not enough RAM-memory (just 32MB) to keep it running. Stick with 8.204 for the moment.

I am really confused on what files I need and am hoping someone will help shed some light in this situation!


For my 720 all I did was update to 8300 with home then overwrite with the SEttsystem file and all works fine and dandy.....

:ilove:

Any positive experience with using tomplayer with v.8.300 on x20?

I'm using 8.300 on my 520

bootloader 5.5022
South African map 7.20
upgraded via TThome from 8.010 and used TTusers (great work!) patched ttsystem.
system seems a little slower moving through menus than when using 8.010, colours are a little different. and as others have mentioned the option to output commands via the FM is gone ( thats a stupid idea, Tomtom please put it back)
route calculation is maybe...slightly faster.
but no major improvements. stick to 8.010 if you dont have issues or wait till an updated 8.3 version comes out. but if you gotta have 8.300 , go for it.

Still no-one who got 8.300 to work on a TT-One ?? (Without freezing when touching the screen)

Nope, you can of course desoldering the 32GB chip and replaced it by a 64GB model.
Maybe I make a how to for others, but it's much easier to wait for an software solution. If possible if the application is too big for internal mem it must be swapped to sdcard, but only in internal mem the TT code is executable.

@All

Someone knows the link for the file. cab official TomTom, of navcore 8.300.9732 x30 ?

:thanks:

Tested on TT Go (classis) 32Mb --> NoGo :-)
Tested on TT Go 700 (64Mb) also a No Go....
Both have the same problem as the TT one´s , freezes and reboots as soon as you touch the (main) touchscreen.....

Cheers..

Its working with no problems on my ttone XL.
using runclean im getting 1,5MB free mem. Without runclean i get 0.1MB free mem but everything works, even long calculations with 150000 roads. No freezes. im using the nobt and notts options also. using 815 iberia map.
Thanks for the great work everybody!

Attention: nobt, rm, etc. have now no effect more without runclean, only if you enable the Cleaning remove it also the unneeded Files from RAM, with outsourced.bin is this almost useless because the Files are already not more in RAM

Quote:
Originally Posted by martpaul
on my one v4. i can touch the screen on the voice and on the sinal of gps to see the version it´s ok, but on the part of the map to the menu it´s freeze any help?

All TTOne's have this problem. There's not enough RAM-memory (just 32MB) to keep it running. Stick with 8.204 for the moment.

like you see in this image i got 7.4 mb free ram the same has other navcore!! we need more free ram?

Please upload one navcore 8.300 with work.
Tanks.

GO910 working fine with x20 emulation :)

Many thanks ttuser !

I confirm what martpaul said!

I do in my tomtom One 2nd Edition:
1. Format SD Card
2. Extract navcore_SE_8.300.9732_basicpack.rar
3. Extract SE_ttsystem.8300.9732.rar
4. Switchs on root: BTon, TTSoff, delgns, cleanflash, runclean, rm
5. Iberia Maps 815 with dct
6. Copy voice folder

Current Configuration:
Current Emulation: X30
BT:1
TTS:OFF
Run in save RAM mod
Remove additional files
run cleaning

Navcore: 8.300 (9732/081030)
System: 244890
32MB RAM: 7.6 Free
GPS: 1.20
Bootloader: 5.5012

And it freeze on menu!!!

If I delete Outsourced.bin I have 2.8MB free RAM

This is not a RAM problem on tomtom ONE... I think It´s a Menu display problem!

i install 8.3 on my 910 but when connect to tthome freez and restart anyone now why


Do you have 8.15 maps in device? I had same prob when I copy 8.15 maps instead 8.10 When you delete MapSettings.cfg file everything is OK (except data you saved into this file :D ).

Ales

Someone knows the link for the file. cab official TomTom, of navcore 8.300.9732 x30 ?
Please help?

Someone knows the link for the file. cab official TomTom, of navcore 8.300.9732 x30 ?
Please help?


Navcores:
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.go530-go730-go930.cab
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.go630.cab
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.gox20.cab

TT Home emulator:
http://download.tomtom.com/sweet/plugin/8-300-9732-1.win.2.2.xpi

I have a new GO 520 running original 8.300 with the patched ttsystem.
I have notice that the battery life is not the claimed 5 hours but only two hours at best. I have blue-tooth switched off so not to drain the battery that way. Anyone noticed poor battery performance on their device ?

Working fine on TTgo720. I just downgraded via the TThome and upgraded to 8.3. Nice icon changes. Anyone else notice that the settings get reset when you try to use the virtual TT in home?

Also, off topic, should I update to the lastest TT home?

GO510 working fine with x20 emulation.

For anyone concerned about TTUsers comment in the first post in this thread "Pc-Connection freeze it" - If the TomTom is turned on when you plug in the USB cable it does indeed freeze.

But if you turn off the TomTom first, then plug in the cable, then turn on the TomTom, it starts up, gets to the point when it would normally show the map or main menu, and reboots, connecting to the PC quite happily.

So TomTome home works, map share updates work, etc

Great work TTUser! :thanks:

don't working in my 710 freeze on tom tom logo.

EDIT:

TTGO 710
Bootloader: 5.5022

Don't boot with navcore 8.300 on SDHC 4 Gb and WCE 8.15 2003 (this card is working perfectly with 8.051 navcore and WCE 8.10 1907) no problem in write and ready on the card

Boot ok with navcore 8.300 on SD 2 Gb and new WCE 8.15 2003

Appl. 8.300 (9732/081030)
S.O. 244890
15,6 MB ram free

Why my SDHC 4 Gb card don't boot???

UPDATE:
I've formatted my SDHC 4 gb card and now working fine.

- Map share working
- LoquendoTTS don't working with voice X30
- Bluetooth working with my phone, hands free calling ok
- Voice address input ok

Thx TTUser..

Issues:
- EPT doesn't work on my 920
- Sometime in Night Mode , after an advice (ex. Phone not connected), Brightness decreases even i've set it 0%

Navcores:
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.go530-go730-go930.cab
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.go630.cab
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.gox20.cab

TT Home emulator:
http://download.tomtom.com/sweet/plugin/8-300-9732-1.win.2.2.xpi

TTMax, Many thanks for helping me outs mate.:thanks:

TTuser :urtheman: :thanks:
Working great with my GO 910!!!
Howe about TT Pluss functions, any changes? Steel not working?

Few Speed Cams:
Have a 920 with 8.300 (updated with TTH) and ttsystem from TTuser, WE 815 Maps and latest cams from here.
There are nearly no speed cams warned by the TT.
With 8.010, 8.016 and 810 map there where all cams active.
After 8.203 and 8.300 with the same 810 map, only few cams shown, they are all activated in the service menu. No change with 815 map

An idea?

Few Speed Cams:
Have a 920 with 8.300 (updated with TTH) and ttsystem from TTuser, WE 815 Maps and latest cams from here.
There are nearly no speed cams warned by the TT.
With 8.010, 8.016 and 810 map there where all cams active.
After 8.203 and 8.300 with the same 810 map, only few cams shown, they are all activated in the service menu. No change with 815 map

An idea?

Hello
Are you meaning if you try to report safety camera and you see no speed cam icon in the map ?if that what you mean than its something new in the 8.3 they hide the cameras like in 8.203

but if you drive and you get no warning i would say try to reactive your speed camera data

i am runing it with 815 map and its works fine

if my post was helpfull i would appreciate reputation points

i want this nav for my one v4:suicide:

Running fine on my Go910 with WCE815. Connecting to phone works, but when I try to download weather info it says I have to connect to TT Home. I don't care that much.
There is a funny thing thought. I use an externel tmc antenna. When I put my Go on the dock at the windscreen, it tells me that in order to use this hardware I have to upgrade to the latest version of my device. Lol, and I was thinking a did use the latest. OK, not for my device.
After pressing OK it works just fine though. Any change of an option/patch to surpress this message?

Thanks TTUser. Love your work :urtheman:

Hello
Are you meaning if you try to report safety camera and you see no speed cam icon in the map ?if that what you mean than its something new in the 8.3 they hide the cameras like in 8.203

but if you drive and you get no warning i would say try to reactive your speed camera data

i am runing it with 815 map and its works fine

if my post was helpfull i would appreciate reputation points

I get only few (20% of all) warnings if I drive. Reactivate where? deactivated all alarms in service menu and reactivated them, no change.

Also i on my 710 when put my Go on the dock it tells me that in order to use this hardware I have to upgrade to the latest version of my device, after pressing ok it works just fine though.


Thx TTUser for your job!
:urtheman:

Just updated my 930, no problems found and it runs perfectly, thanks to all who contribute to this forum.

Navcores:
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.go530-go730-go930.cab
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.go630.cab
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.gox20.cab

TT Home emulator:
http://download.tomtom.com/sweet/plugin/8-300-9732-1.win.2.2.xpi

Whats the difference between these Navcores and the Navcores in post #1 of this thread?

@Anbu37:
in first post, there is SE navcore "patched" by TTuser
in post#113, it is the original navcore on tomtom site

This works perectly on my 720. Thanks.
One question how do I get home to work to operate my go?
I have a file from the dowloaded archive called '8-300-9732-1.dll'
But cannot figure out what folder it needs to go in on my computer.

The navcore 8300 for all devices are identical in everything.

The only difference for X630:
- Bootloader 5.5022 (instead of 5.5015)

- Missing two files:
a) fm2010parameters
b) fmsignal

We need to test us, this time in the "Official"

hello
ciao :bad:

This works perectly on my 720. Thanks.
One question how do I get home to work to operate my go?
I have a file from the dowloaded archive called '8-300-9732-1.dll'
But cannot figure out what folder it needs to go in on my computer.

Depends if you are using XP or Vista...

XP: C:\Documents and Settings\XXXX\ApplicationData\TomTom\HOME\Profiles \XXXX.default\extensions\

Vista: C:\Users\XXXX\AppData\Roaming\TomTom\HOME\Profiles \XXXX.default\extensions\

You will have to operate your TT once from TThome, it will download new files to a new directory after extensions (see above). Overwrite the dll from TT with the cracked one.

Good luck.

LoquendoTTS now working on my 710 i used loquendo voice 6.5 and old folder loquendotts from navcore 8.051

Still stuck using x40 emulation with TomTom One New Edition when navigating to Postal code or Longtitude/Latitude

thanks for this

Am I the only one that can't work this out ? :(

Updated my 920 via home to 8.300, it booted up just fine but when I try to select my W&CE 8.10 map I get the message 'you cannot use this map on this device : Western_and_Central_Europe-15'

I then tried copying the ttsystem file from TTuser to my device, and it still boots up and everything looks the same but I still can't select this map, I get the same error.

The map was working fine with NavCore 8.002, could anyone be kind enough to point me in the right direction ? I see lots of posts here from 920 users that say they just updated via home and used TTusers system file, and I don't know where I'm going wrong...

you need to activate your Map
http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58
with Option 1

How very silly of me.... I assumed that because I already activated this map using your fine program for NavCore 8.002, that it would remain activated, I never thought I would need to do it again...

Thank you so much for your kind help Mr TTuser sir, all working now... +rep

Running fine on my Go910 with WCE815. Connecting to phone works, but when I try to download weather info it says I have to connect to TT Home. I don't care that much.
There is a funny thing thought. I use an externel tmc antenna. When I put my Go on the dock at the windscreen, it tells me that in order to use this hardware I have to upgrade to the latest version of my device. Lol, and I was thinking a did use the latest. OK, not for my device.
After pressing OK it works just fine though. Any change of an option/patch to surpress this message?

Thanks TTUser. Love your work :urtheman:

Hi!
Same prob with my 910! Any segjestions!???:thanks:

Thanks for the help in getting tomtom home to operate my device. It works a treat.:thanks:

All credit has for TTUser for his excellent work :thanks:

My small contribution for navc8.300 (screen freeze)

Patch is required!!! :nod:

Works for all TT...(normally)

Download with IE Windows ( No Firefox! )
http://download.tomtom.com/sweet/plugin/8-300-9732-1.win.2.2.xpi :hehe:

Rename extension .xpi to .zip)
(8-300-9732-1.win.2.2.xpi to 8-300-9732-1.win.2.2.zip)

Unzip file 8-300-9732-1.win.2.2.zip (WinRar) :ashamed:

Copy files to TT... :dance:

data.chk
data_3d.chk
data_im1.chk
data_im2.chk
data_is1.chk
data_li.chk
data_sp.chk
data_ts.chk

Have fun :egdance:

Thanks for the patch.

the file

DATA.CHK / DATA.IM1.CHK / DATA_LI.CHK / DATA_SP.CHK /DATA_TS.CHK

are the same (compared byte to byte) with 8.203 basic pack.

The difference is DATA_3D.CHK / DATA_IM2.CHK / DAT_IS1.CHK

Now TT ONe boot and work.
But the icon of ALG (to enable/disable it in Preferences) is not displayed right (no icon)

I installed the 8.204.

the patch works fine

the icon of ALG isn't there but ALG works well

Stupid question probably; but what does 8.300 have/support that 8.204 doesn't?
All I noticed is indeed the absence of the ALG menu and the x40 menu.
So IMHO 8.300 is less interesting the 8.204

I seem to be having troubles getting my Loquendo TTS voices to work on a TTOne XLS. I have tried them in both x20 and x30 modes. I am using the x30 voices. I get no sound at all. I am sure I am being stupid and overlooking something, but could someone point me in the right direction?

Even though I knew they wouldnt work I also tried the VocalizerTTS files.

nofences.

Have you read this post?

http://www.ipmart-forum.com/showpost.php?p=2361533&postcount=339

How very silly of me.... I assumed that because I already activated this map using your fine program for NavCore 8.002, that it would remain activated, I never thought I would need to do it again...

Thank you so much for your kind help Mr TTuser sir, all working now... +rep
Just so you & others know what & why TTuser has advised you...

if you look at Option 1, it is for v8010 upwards ( + now a couple of the new v7's )
if you look at Option 2, it is for v7 to 8.002

You are, in effect, moving from one generation of key to another so require a new dct file to suit the navcore group it is in.

yDG

nofences.

Have you read this post?

http://www.ipmart-forum.com/showpost.php?p=2361533&postcount=339

I had read that post, but didn't know if it applied to the 910 only? I am downloading the file, will try it out and report back, thanks again for your help Alex.:thanks:

nofences

It is for all TT models :)

Ok, I tired both files in the post you sent, it will enable (briefly) the VocalizerTTS files, but still no go on the Loquendo files. Also, once I try and test a Loquendo voice, the Vocalizer voice stops functioning. Any idea what I am doing wrong?

Update: I simply deleted the LoquendoTTS voices from the device and the Vocalizer voices are working great now. That is really all I need. It's Sexy Samantha and Tantalizing Tom for me!

nofences

Look at this discussion. It could be interesting for your

http://www.ipmart-forum.com/showthread.php?t=306350

Tantalizing Tom for me!


:ashamed: Somthing you wan't to talk about ?? :ashamed:

:girlblum: Need someone to hold open the "closet" door ? :girlblum:

Thanks for all, everone!!
All seems to work fine on my 920.
But...I have the same icons as on version 8011. How can I get the new iconset in this nav 8.3?
I have in the root model.txt with the text x30

Thanks for any help

:ashamed: Somthing you wan't to talk about ?? :ashamed:

:girlblum: Need someone to hold open the "closet" door ? :girlblum:

What can I say, Tom has a sexy Silhouette and those smooth sultry tones! :roflmao:

nofences

Look at this discussion. It could be interesting for your

http://www.ipmart-forum.com/showpost.php?p=2354861&postcount=1

Alex, I am running the North America 815 maps and they work perfectly. It is just the Loquendo voices I can't get to work. It would be nice if they did, but as long as I can get the Vocalizer voices working (and they do) I can live.

Besides, that table is in french and Je dont parle le français! :LoL:

Sorry, nofences

Shame on me :( I did a mistake and didn’t check what link put in the post.
I mean this discussion http://www.ipmart-forum.com/showthread.php?t=306350
Sorry again :ashamed:
and I corrected my previous post also. :)

Sorry, nofences

Shame on me :( I did a mistake and didn’t check what link put in the post.
I mean this discussion http://www.ipmart-forum.com/showthread.php?t=306350
Sorry again :ashamed:
and I corrected my previous post also. :)

No big deal, I did read the post about making the Loquendo TTS work in XLS emulation, but I like the ALG and IQ routes, Vocalizer allows for those so I will stick with it. Everything seems to be working. I am trying the 8.203 software on it now... I dont htink I like the x40 screens and icon... they are too busy and a lot of them look too much the same. Will likely stick with the 8.300 software.

Thanks again for all your help!:wave:

guys any chance to work @ Go 700 ?

have had it working on a 500 with no problems, but changed back to 8.204 now that the postcodes are working as I prefare the icons better. So a 700 should be no different to the 500

I am totally confused here guys

Need the latest Navcore 8.3 and Australia Map for my TOmtom One XL . Can someone point me to the correct link and how to crack them?

Regards

I am totally confused here guys

Need the latest Navcore 8.3 and Australia Map for my TOmtom One XL . Can someone point me to the correct link and how to crack them?

Regards

See my post http://www.ipmart-forum.com/showpost.php?p=2363865&postcount=226 for a copy of what you need for the Navcore 8.3. Be sure to put in your own serial # and device code. After that, add your map and crack it using the RunMeForAllAutomatic function in TTUser's EasyUse Tools, which are found all over this site.

Good luck.

has anyone got the voice button working 0n 8.3 not showing now, was ok on 8.201 ?

and 8.15 2003 UK working ok with 8.201 on my 710

has anyone got the voice button working 0n 8.3 not showing now, was ok on 8.201 ?

and 8.15 2003 UK working ok with 8.201 on my 710

There is NOT voice button in 8.300.
8.300 doesn't have this option. It is only for x40 Navcores.

thanks for the answer

as i said with 8.201 815 maps work and button there, for anyones who uses the 8.201, i found the 8.204 with 815 maps has some menu corruption,

Has navcore 8.3 a new iconset? Or will my device remain the ''old'' iconset?
I have 920 with nav 8.3 and wce 8.10.
In the root I made a file called model.txt with the text "x30" in it. I updated through TTHome and replaced ttsystem.
My icons are the same as nav 8.11. Is this normal or should I have new icons?

Greetsels,
Almanbrother

My go500 doesn't scan for satellite... WHY??

Is this normal or should I have new icons?


It is normal. Navcore 8.3 has the same icons set, as 8.05, unlike Navcore 8.2.

Any chance to get Navcore 8.3 on my TTOne V2?

What is this new folder "Navcore.8.300.9732_tomtom.com"??

Thank's

Any chance to get Navcore 8.3 on my TTOne V2?

yes :weedman:

It is normal. Navcore 8.3 has the same icons set, as 8.05, unlike Navcore 8.2.

Is it possible to have the new iconset on my 920?

No

New icone for gox40 only.
Asked to sell their new TT

Is it possible to have the new iconset on my 920?

YES, you have to install SE Version of 8.204 from ttuser on your 920.

Any chance to get Navcore 8.3 on my TTOne V2?

yes :weedman:

??? Tell us how !!
So far I indeed could get it on TTOne v2 but when hitting the navigating screen it freezes. (The two screen parts below do work.)

After installation, NC 8.300 has ceased to function Event Logger. Do you know someone on a solution? Thanks. :ashamed:

TomTom GO 910, NC 8300, W + C 8.15 Europe

hi all, I've got 8.1 or something running with navcore 8.3on a 920

I notice straight away that it sees less satellites and is slower to fix?

and it locks on power up if I have my mapsettings.cfg file from my old v7 maps folder in the v8 maps folder, any ideas on that?

edit, a reboot seems to fixed the satellite problem

After installation, NC 8.300 has ceased to function Event Logger. Do you know someone on a solution? Thanks. :ashamed:

TomTom GO 910, NC 8300, W + C 8.15 Europe

To me with the navcore 8.204, and the bootloader 5.5.106 with western_and_central 8.15.2003 it works well. And it on TOMTOM GO 910.

What is this new folder "Navcore.8.300.9732_tomtom.com"??

Thank's

UP please...thank's

??? Tell us how !!
So far I indeed could get it on TTOne v2 but when hitting the navigating screen it freezes. (The two screen parts below do work.)

Try this setup

http://rapidshare.com/files/168732191/8.30.rar

Thanks
But just out of curiousity; what's the profit of it in comparisment with 8.204 ?

good evening looking loquendoTTS germany thanks

UP please...thank's

-------------------------------------------
it's full tomtom home dll (cracked) directory
-------------------------------------------

Hi Everyone, newbie here.
I had read through all 17 pages of this post and i'm still confused!!!
I don't want to appear stupid, but i probably will, but i still can't figure out what to do.

I have a Go720 with App v8.3 and North American map v720.1803

I would love to be able to get the NA v815 map running.

I have read TTUsers 1st post several times now and still can't seem to figure it.

Could someone hold my hand and guide me through it, please?

I have home 2.4 installed on the PC and i like to think i'm pretty computer savy, but its just going over my haed at this stage!

Hi Everyone, newbie here.
I had read through all 17 pages of this post and i'm still confused!!!
I don't want to appear stupid, but i probably will, but i still can't figure out what to do.

I have a Go720 with App v8.3 and North American map v720.1803

I would love to be able to get the NA v815 map running.

I have read TTUsers 1st post several times now and still can't seem to figure it.

Could someone hold my hand and guide me through it, please?

I have home 2.4 installed on the PC and i like to think i'm pretty computer savy, but its just going over my haed at this stage!


Did you actually download the 8.15 map ? Ya got it ?

Did you download TTusers Easyusetools ?

If you've answered 1 & 2 yes, then there's some great tutorials here that walk you thru the installation. [hand holding included] search

If you answered no to either question, then i'd suggest you do some more reading. The sticky's contain all the info you'll need. search

I updated to 8.300.9732 and 8.15 North America Maps. My TTS is choppy now. Is it the Navcore or the map that's causing it?

-------------------------------------------
it's full tomtom home dll (cracked) directory
-------------------------------------------

ok thank you and I must do what with? I must copy the contents where?

Translate :Google

ok thank you and I must do what with? I must copy the contents where?
Put this folder "Navcore.8.300.9732@tomtom.com" & contents in the Profile folder of your TomTom Home Typically in Windows XP:-

C:\Documents and Settings\*******\Application Data\TomTom\HOME\Profiles\********.default\extensi ons

ok thank's a lot

I updated to 8.300.9732 and 8.15 North America Maps. My TTS is choppy now. Is it the Navcore or the map that's causing it?

My TT720 suffers also from choppy computer voice after instaling Navcore 8.300 and Iberia 8.15. Any solution?

[LIST]
16.11. rev1.1 revised cleaning, rm, btoff, etc. take no effect without runclean, this works now separate


What have you released exactly on 16.11? A new version of ttsystem? Where is it? Current version causes choppy TTS in my 720...

TTuser released new version of ttsystem.

Upgraded from 8.011 using 810 WCE maps, dropped all the SE8.3 files onto the tomtom, option 1 on the Easytools,
My 710 booted twice as expected, and now for teh last hour has sat with teh start screen and nothing else, just teh tomtom start screen.

Before I do something stupid.....any advice please.

TIA

Kip.

TTuser released new version of ttsystem.

Where is it exactly? I can't find it on the first post...

It's really in the first post of this topic !

Download *.dlc file enclosed to the first post.
Download JDownloader http://wiki.jdownloader.org/index.php?title=JDownloader_Wiki:Portal_English
Open *.dlc file in JDownloader
Download with JDownloader

It's really in the first post of this topic !

Is it the 8300.dlc.zip link?

Yes it is the 8300.dlc.zip link

Yes it is the 8300.dlc.zip link

The only thing I found after downloading the package in that file with jDownloader is the ASR folder. Where is the new ttsystem?

When I open the file with jDownloader I see;
1- ASR.rar
2-Home_dll_8-300-9732-1.rar
3-NavCore.8.300.9732_tomtom.com.rar
4-NavCore_SE_8.300.9732_basicpack.rar
5-SE_ttsystem.8.300.9732.rev.1.1.rar

So you must have a problem......

Everything are there

Sorry it looks like my jDownloader needed an upgrade.

After updating jDownloader now it downloads all the packages.

I have a question... what is the difference between the "regular" version and the "SE" version of Navcore?

It looks like the SE version lacks some things. Right? What is the purpose?

I have a question... what is the difference between the "regular" version and the "SE" version of Navcore?

It looks like the SE version lacks some things. Right? What is the purpose?

Regular is what TTHome gives you but won't allow cracked maps.

SE is TTusers Special Edition for using cracked maps.

Thanks for the response.

In the SE_ttsystem.8300.9732.rev.1.1.rar there is a switchfiles.zip file and a Outsourced.bin folder.

If I understand correctly, those files are only to reduce memory usage. Is that right?

How should they be used? It is very difficult to understand his explanations in readmenot.txt...

Attention: nobt, rm, etc. have now no effect more without runclean, only if you enable the Cleaning remove it also the unneeded Files from RAM, with outsourced.bin is this almost useless because the Files are already not more in RAM


Great info becuse I dont know how to remove startup message.

I can't delete any favorites inside menu ( change preferences/manage favorites) ?When I select one favorite and tap delete ...nothing goes.

Using latest TTuser 8.3 downloaded from dlc today.

Just updated my 930, no problems found and it runs perfectly, thanks to all who contribute to this forum.
Did you check if your EPT working, mine for some reason doesn't work...or maybe someone here know how to fix this EPT problem?, TIA

this nave will never work in a tt one???

Please check the thread, download the patch, and run the optimization.

It works on TT One.

Here's the file from the first post in this thread - @ 103mb download -
http://www.megaupload.com/?d=RED6PCK3

Question;
Why would anyone install 8.300 if 8.204 is more complete?
Is there anything why you'd install 8.300 above 8.204?
IMHO: 8.300 has NOTHING extra, even misses options which are in 8.204.
Please explain, I am very curious.

The only new option in 8.204 is a voice control, so why do not install 8.300 with old iconset :)

The only new option in 8.204 is a voice control, so why do not install 8.300 with old iconset :)

So that already makes 2;
Voice Control
New Icon Set

So WHAT is the pro for 8.300 ?????

Great info becuse I dont know how to remove startup message.
---------------------------------------------------------------
put in the root the switch
nomsg
------------------------------------------------------------

My TT720 suffers also from choppy computer voice after instaling Navcore 8.300 and Iberia 8.15. Any solution?

I have the same problem with the Italian map 815 (but also with the old 810) and the Navcore 8.300 (only the patched TTSystem to let the maps work).

I've tried with all 3 types of computer voice (x10, x20 and x30).... same results.

Another problem I have is that if I select a different visual scheme (from the directory schemes) the device has no changes (uses the Belgica one). Don't know why.

If anybody experiences the same issues and has a solution is more than welcome! :)

Running fine on my Go910 with WCE815. Connecting to phone works, but when I try to download weather info it says I have to connect to TT Home. I don't care that much.
There is a funny thing thought. I use an externel tmc antenna. When I put my Go on the dock at the windscreen, it tells me that in order to use this hardware I have to upgrade to the latest version of my device. Lol, and I was thinking a did use the latest. OK, not for my device.
After pressing OK it works just fine though. Any change of an option/patch to surpress this message?

Thanks TTUser. Love your work :urtheman:

Can somebody UPLOAD a complete image for the TomTom 910 ???

I can't get it to work, it is driving my mad by now ;-(

So please upload a image or detailt "lay out" because I'm messing up my TomTom 910 right now ;-(

Thanks !!! :excited:

Question;
Why would anyone install 8.300 if 8.204 is more complete?
Is there anything why you'd install 8.300 above 8.204?
IMHO: 8.300 has NOTHING extra, even misses options which are in 8.204.

With the first version of 8204 many functions on x20's did not work :oops2:and a patch for 8300 was donated by TTuser within days of 8204 first being available. As the 8300 patch was not a full SE pack and just used with official 8300 all functions for x20 worked ok (fm,line out,light sensor). However,now that we have v1.1 from TTuser for 8204 lots of guys are reverting,myself included, so that we can use the new x40 appearance and the full vocal instruction suite.

:ilove:

Which navcore will work with GO 500 and Australia map 815.2059.
Thank you kindly for your help.

Running Tomtom Go 910
SE Nav 8.300.9732
BOOT 5.5106 - MAP AUSTRALIA v815.2086

Just wondering if anyone else is experiencing a freeze screen when plugging into usb, the only alternative i found to connect to computer was; if i connected usb during start up process. Anyone experiencing this issue? is there a fix. i have not found otherwise?

Also is anyone recieving GPS fix updates on this firmware ? TT home 2.4 does NOT seem to find a quickfix update for me - i have tried many times on different days. - ('ephem' folder is empty)

-EDIT = it appears to me that the GPS signal locks very fast even without any gpsfix, can someone experienced comfirm if this is correct.

any help is appreciated - ty

Can anybody tell me if this works with a GO300? I really want the 8.15 update as it appears to have my road on it. (Currently directions only get me about a mile from my house)

qtpanda

Read this post for freeze screen http://www.ipmart-forum.com/showpost.php?p=2361439&postcount=100

For GPS fix.
I recieve it for my 910.
Try the folowing:
- Connect TT to the computer and run TTHome
- Select icon “Add maps, voices, etc”
- Select there “Add items on my computer”
- Select there “GPS quick Fix data”
- In opened windows select the last GPS quick Fix which you received (the lowermost at this list)
- Press “Add” botton
Try to receive updates via "Update my Go”.

Which navcore will work with GO 500 and Australia map 815.2059.
Thank you kindly for your help.

Im using 8.203.7917 on my go500 with the uk v815 map

I tried updating the 8.300.9732 navcore to my tomtom go 500 and its freezing on the first screen. More over i have noticed that instead of arrows, its apprearing a rectangle. Can any of our gurus let me know whether it works on tomtom go 500

I have the same problem with the Italian map 815 (but also with the old 810) and the Navcore 8.300 (only the patched TTSystem to let the maps work).

I've tried with all 3 types of computer voice (x10, x20 and x30).... same results.

Another problem I have is that if I select a different visual scheme (from the directory schemes) the device has no changes (uses the Belgica one). Don't know why.

If anybody experiences the same issues and has a solution is more than welcome! :)

Deleting the mapsettings.cfg I have solved the visual scheme error.

The voice quality, unfortunately, remains the same.
This quality issue, affects only the computer voice just because the normal voices are clear.

Running Tomtom Go 720T
SE Nav 8.300.9732
BOOT 5.5106 - MAP WECE v815.2003

Works now perfectly. - Thx to TTuser and chacks (for the map(s))

I did a clean install on the internal drive, means:
01: I formatted the internal drive first
02: I copied the WECE8152003 to it, also I put in this mapfolder the generated dct-files for the map and speed traps and the dummy speech-files
03: finally i copied the folder asr and the rest from the pack offered by TTUser and also the patched ttsystem
04: Also I installed the tomplayer now available in a new version (tomplayer.net)

All works well - mapshare- and gpsfix-updates, bluetooth, line-out (!!), speed traps, tomplayer, delpoi, voice control for my favourite country... - aeh - the navigating option is also working ... :)

With NC8.3 it's now possible to use the line-out (fm-transmitter? - not tested, no need for that) - and this wasn't possible with the previous version (8.204) - someone asked for advantages of NC8.3 - should be an explanation why users are very interested in NC8.3

Greets and THX again

Inti31

Hi !

After upgrade from 8204 to 8300 my TT-ONE works but all icons have disappeared.
When I push in the middle of the screen, it can't show options and it freezes.

All basic functions works fine, it navigates and all settings in the taskbar below works fine (volume adj., view version, satellites config,etc..)

Could anyone help me?

T.I.A. :thanks:


TT ONE v3
Map Iberia 8.15
32 Mb RAM - 4.5 Mb Free

i can't find the voice input for navigation anywhere

i can't find the voice input for navigation anywhere

It's very clearly stated by TTuser in first post:

"ASR Folder for Voice Input is equal to 8.201 or 8.203"

Known Errors (Experiences valid for my 710):
old Remote still dead (this mean the "NOT BT" Remote);
no "poweroff" more possible (the angry Watchdog barks always and the Device wake up again);
SDK Programs which need Touchscreen works not more;
Pc-Connection freeze it;
x20 TTS Voices works not;
only x20, x30 Emu. available; all other not available or broken
seems not to works for ones and Riders, ONE XL is ok
Original for Device: x20, x30, 630


TT Site says:
Version 8.300
(TomTom GO x20 and x30 series only)

* Support for IQ Routes 24/7 data (map version 8.15 or higher required)
* Support for SDHC cards (8GB and higher)


You need to download:
Have you nothing:Basicpack+ SE_ttsystem.8.300.9732.rar
update you already through Home to 8.300 replace only ttsystem
ASR Folder for Voice Input is equal to 8.201 or 8.203
x30 Voices (http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111)

all Features, Function, use similar as already known, read readme for exact Infos

Should someone mirror it again to RS then change the rar a little that it have a other crc.

Changelog:
16.11. rev1.1 revised cleaning, rm, btoff, etc. take no effect without runclean, this works now separate

Cleaning now reversed, Standard disabled, because original is there no cleaning more, switch it again on with "runclean", with Outsourced.bin almost useless to run a cleaning

Now only as .dlc ,you can use
http://jdownloader.org/download

Hi Everyone,

This is a great site, with lots of stuff i am interested in, but with fear of been ridiculed, you have to look at requests for help through inexperianced eyes not through your own experianced eyes.

I'm trying to work towards getting the new maps on my 720, which is running v8.3 supplied by TT at the moment.
So i have read through lots of stuff and this seems to be the first place to start, so i downloaded the Jdownloader from the link and let it update a couple of times.
Next i downloaded the 8.3 zip file and extracted it to a .dlc file.

Now what? my PC doesn't recognise a .dlc file, and i assumed the jdownloader would have taken care of this. What should i do next?

Remember be kind, i have never heard of a .dlc file before:thanks:

Hi !

After upgrade from 8204 to 8300 my TT-ONE works but all icons have disappeared.
When I push in the middle of the screen, it can't show options and it freezes.

All basic functions works fine, it navigates and all settings in the taskbar below works fine (volume adj., view version, satellites config,etc..)



Just out of curiousity;
Why did you upgrade ? What did you win with it?
IMO you only loose functions and add problems you didn't have before....
Best solution would be to go back to 8.204

Hi Everyone,

This is a great site, with lots of stuff i am interested in, but with fear of been ridiculed, you have to look at requests for help through inexperianced eyes not through your own experianced eyes.

I'm trying to work towards getting the new maps on my 720, which is running v8.3 supplied by TT at the moment.
So i have read through lots of stuff and this seems to be the first place to start, so i downloaded the Jdownloader from the link and let it update a couple of times.
Next i downloaded the 8.3 zip file and extracted it to a .dlc file.

Now what? my PC doesn't recognise a .dlc file, and i assumed the jdownloader would have taken care of this. What should i do next?

Remember be kind, i have never heard of a .dlc file before:thanks:

Best tutorial (& links) is tpots from here: http://www.ipmart-forum.com/showthread.php?t=296938

and here; http://www.ipmart-forum.com/showpost.php?p=2335889&postcount=1

Best tutorial (& links) is tpots from here: http://www.ipmart-forum.com/showthread.php?t=296938

and here; http://www.ipmart-forum.com/showpost.php?p=2335889&postcount=1

Thanks Dave, yes i have read these, but i can't get to even download the zip file that TTuser posted. I am assuming jdownloader should have dealt with the .dlc file but it isn't. What am i missing?

quot:
After upgrade from 8204 to 8300 my TT-ONE works but [B]all icons have disappearedCould anyone help me?

TRy to read the 1st post? 32MB in TT One is not enough for version 8.3

"Im using 8.203.7917 on my go500 with the uk v815 map "

Thanks for that Spark1e.
Is it possible for you to point me to that particular app:8.203.7917 .........I would be eternally grateful.

Thanx again

hii mans i have tt 910 i download navcore 8.300 .9732 gox20 cab. could someone give me right tt home dll and also other problem is phone and bluetoot not working . please i need to help ?
sorry my english . thanks for help.

greatings and best regards from finland.

xhosa12 look here:
http://www.ipmart-forum.com/showthread.php?t=300929
varlomies look here:
http://www.ipmart-forum.com/showpost.php?p=2354685&postcount=65 thats all v8 .dll files
Tutorial for using them can be found here:
http://www.ipmart-forum.com/showpost.php?p=2335889&postcount=1

:ilove:

xhosa12 look here:
http://www.ipmart-forum.com/showthread.php?t=300929
varlomies look here:
http://www.ipmart-forum.com/showpost.php?p=2354685&postcount=65 thats all v8 .dll files
Tutorial for using them can be found here:
http://www.ipmart-forum.com/showpost.php?p=2335889&postcount=1

:ilove:

:dance2::thanks: IF I CONNECT PHONE(BLUETOOTH) TO TOMTOM I,LL BE REALLY GLAD. I CAN NOT CONNECT

hello sirs i can not connectting phone to tt 910 . navcore 8.300 .9732 gox20 cab.. i need help ? could you please help me ?

thanks.

Having a small problem with my TTV3 Hope somebody has the answer, I'm running 8.3, w/815 Map, patched so TTS works under x20 emulation. Under the Config (switch) i'm running btoff...
Problem is my TT is acting like I'm using the old poweroff switch... when the system turns off, It has to boot fully on next run. Instead of instantly coming on... any ideas what's wrong?
Also noticed that Navcore 8.3 doesn't load from cleanup.txt in root... trying to autostart Suntime App
any ideas?

"Im using 8.203.7917 on my go500 with the uk v815 map "

Thanks for that Spark1e.
Is it possible for you to point me to that particular app:8.203.7917 .........I would be eternally grateful.

Thanx again


terrytpot has already replied but here's the link to the thread I used
http://www.ipmart-forum.com/showthread.php?t=300929

Morning,
"resume on external power" doesn't work with this navcore.
With 8.0* it was fine on my G0710.
Is there a way to fix this with the new navcore?

Nikolauzi

what is enhanced ALG from post #2?

Advanced Lane Guidance: http://images.google.co.uk/images?hl=en&safe=off&q=advanced%20lane%20guidance

Hello,
I've the version 8.051 with the french card v815.2023 on my 510. How I can have the ALG?

Hello,
I've the version 8.051 with the french card v815.2023 on my 510. How I can have the ALG?

You're in the wrong place. Should be asking in the right place

Look here:
http://www.ipmart-forum.com/showthread.php?t=287254

Could somebody post this? The link no longer works!

All credit has for TTUser for his excellent work :thanks:

My small contribution for navc8.300 (screen freeze)

Patch is required!!! :nod:

Works for all TT...(normally)

Download with IE Windows ( No Firefox! )
http://download.tomtom.com/sweet/plugin/8-300-9732-1.win.2.2.xpi :hehe:

Rename extension .xpi to .zip)
(8-300-9732-1.win.2.2.xpi to 8-300-9732-1.win.2.2.zip)

Unzip file 8-300-9732-1.win.2.2.zip (WinRar) :ashamed:

Copy files to TT... :dance:

data.chk
data_3d.chk
data_im1.chk
data_im2.chk
data_is1.chk
data_li.chk
data_sp.chk
data_ts.chk

Have fun :egdance:

Could somebody post this? The link no longer works!

The link IS working! Use Internet Explorer.

File not found.

Did you try it, before you wrote that?

The link IS working! Use Internet Explorer.

You can download it from that link !! (Just checked it)
READ: USE INTERNET EXPLORER NOT FIREFOX !



And yes !! I DID CHECK IT B4 I WROTE THIS.

i konow what ALG is. but what is enhanced ALG? is it something special in nc 8.204?

1. found you this Files also in my downloads as Navcore.8.300.9732_tomtom.com.rar
2. if i use the HOME PC Files on Devices freeze crash stutter delayed freezes crashed it like hell, poor Idea to use the made, used for Home Files on Devices
what comes next use dll on devices, install home on devices:afraid:

Yup that are files for TT Home placed in

C:\Documents and Settings\Destroyer\Application Data\TomTom\HOME\Profiles\7w6fyxfl.default\extensi ons\Navcore.8.300.9732@tomtom.com

NOT IN THE TT NAVIGATOR UNIT!!!

what is enhanced ALG from post #2?
I've got a nasty feelin that I'm setting myself up to be shot down in flames here but what the hell,here we go..
:oops2:
As far as I'm aware,the term "enhanced ALG" was first coined by mav in post 2 where he says:
"enhanced ALG (more junctions)"
I think all this means is tomtom have gotten round to adding more ALG data within the newer maps not that its a new and improved ALG. If you look for posts by ChillyCat he quite often posts screenshots of new ALG pictures that he stumbles across in the US (quite often with nice detail in them) implying that tomtom are getting around to including new "pictures" within their mapshare updates.
Another of our American members also recently coined the phrase "reality view" referring to the pictures themselves, as opposed to the arrows shown at the bottom of the screen (when using the menu bar in its horizontal mode) which he insisted were the actual "advanced lane guidance",although I've never seen either expression used by an official source such as tomtom themselves...of course saying that leaves me wide open to any further information on the subject that anyone else has access to,so,fill your boots and educate us all some more if you can........

:ilove:

I've got a nasty feelin that I'm setting myself up to be shot down in flames here but what the hell,here we go..
:oops2:
As far as I'm aware,the term "enhanced ALG" was first coined by mav in post 2 where he says:
"enhanced ALG (more junctions)"
I think all this means is tomtom have gotten round to adding more ALG data within the newer maps not that its a new and improved ALG. If you look for posts by ChillyCat he quite often posts screenshots of new ALG pictures that he stumbles across in the US (quite often with nice detail in them) implying that tomtom are getting around to including new "pictures" within their mapshare updates.
Another of our American members also recently coined the phrase "reality view" referring to the pictures themselves, as opposed to the arrows shown at the bottom of the screen (when using the menu bar in its horizontal mode) which he insisted were the actual "advanced lane guidance",although I've never seen either expression used by an official source such as tomtom themselves...of course saying that leaves me wide open to any further information on the subject that anyone else has access to,so,fill your boots and educate us all some more if you can........

:ilove:

Terry, you are correct. I said enhanced ALG, not Enhanced ALG. I meant that with the new maps TT have enhanced their offering of ALG with the new maps which include junctions not previously included on their first offering of maps such that many more junctions are shown, not that it is a better system. No flames from here mate.

It certainly makes some junctions a lot clearer e.g. travelling into Leeds or around the M60 near the airport and I bet on roads rarelly travelled upon, it is a great help. I still have a lot of my A2Z maps highlighted with markers doing just that preGPS days. Would have taken a lot of the stress of a 3000-3500 mile a week job away.

Any positive experience with using tomplayer with v.8.300 on x20?

Yes.
But make sure you download it from their website. Then unzip(unrar) and copy the whole lot into your root folder. Do not copy the ttsystem file, though which is also included because your device will not boot. Use the ttsystem file that you have already been using.
Then download PocketDivXEncoder_0.3.60 from this post
http://www.ipmart-forum.com/showthread.php?p=1962667&highlight=tomplayer#post1962667 to convert your videos. From this post use only the encoder, the other stuff is useless.
It depends on your TomTom's CPU, what video quality you can use. I have a TT920, so I use quality "40" with "Original framerate". Set your "output dimensions" to 480x...(tick "keep aspect ratio" as seen on the screenshot).
Then "Encode now" and copy the encoded video file into your TomTom's "video" folder.
Enjoy.
Best regs,
Weko

It's very clearly stated by TTuser in first post:

"ASR Folder for Voice Input is equal to 8.201 or 8.203"

If you do a (clean) install of the original navcore 8.300 for x20 you only have to activate the ASR function.
Place a text file named 'support_asr.dat' in the \ASR folder. This text file must contain the number 1 supposedly to activate it.
So texfile contains only the number 1 on the first line.

You don't need the ASR files, only this file, at least that's my finding.

You can download it from that link !! (Just checked it)
READ: USE INTERNET EXPLORER NOT FIREFOX !You can use Firefox!!
On the "anonym.to" page just right click on the link & chose to "save link as" and then download as normal.

hi everybody i have Go910 with navcore 8.300 and map wce 8.15 it work fine but i cant update mapshare or quickgps with TT Home why ?

Here by me with same configuration MapShare also not working for this map.

Why TT device turn it self off after some time when its on home charger?I have try solution with noautosuspend.dat in root but no luck.

hi everybody i have Go910 with navcore 8.300 and map wce 8.15 it work fine but i cant update mapshare or quickgps with TT Home why ?

Western_and_Central_Europe 815.2003

Mapshare MAJ 22/11/2008

http://www.badongo.com/file/12199557

Password: pierrot6150

Thanks Nicole1200 , rep+ added

Hi TTUser, many thanks for your good work, any chance of being able to get a x40 emulation for 8.3 for the 720.

Cheers

not possible, since it is max. for a x30 made include it the x40 stuff not

Hi TTUser, many thanks for your good work, any chance of being able to get a x40 emulation for 8.3 for the 720.

Cheers

Sorry, stuff up double entry. thanbks for the info TTuser

Cheers Nick

I have have tried to install maps and, nav 80029117, with us maps 8.15 2019, and when i turn on the ttomtom it states no maps .

osmania11,
this is a thread for Navcore 8.300.xxx systems.
you better ask here: http://www.ipmart-forum.com/showthread.php?t=243016

good luck!

With 8.3 rev1.2 deleting favorites also not working, just tested.

Better RAM save on ONE XL (32 MB), I see much free memory.

I don't know if already posted but...
as SeaDestroyer pointed to me..
Manage/delete favorites in this navcore and also in 8.204.9718 is not working..

Ehp!
We both at the same time... ;)

This doesnt work with V8 Aussie map, freezes when selecting anything on the menu with TomTom Go500

Thanks Nicole1200 , rep+ added but it work with map france 8.15? itry this
so i have always message error with my account but it's update now

Hello,
Navcore 8.300 has another annoying bug.
If street name contains in its name uppercase letter with dot "." and then full word, find street does not working.
Examples:
T. Narbuto Gatve
S. Zukausko Gatve
I. Simulionio
all these streets can be found in Vilnius, Lithuania.

With earlier versions of navcore it was enough to enter just part of the name from full word. For example to find T. Narbuto Gatve it was enough to enter Narbuto and so on.

The same problem is valid for other countries and cities, but in Lithuania there is a lot of streets with such names.

Tomas

Hello,
Navcore 8.300 has another annoying bug.... :afraid:

(affiche déjà...en 2ème position après 4 caractères seulement!)

Works well :good2:
1.pays-lithuania
2.ville-Vilnius
3.rue: T.Na

(... is already in 2nd place!)
1 - T.Ivanausko Gatve
2 - T.Narbuto Gatve

I don't know if already posted but...
as SeaDestroyer pointed to me..
Manage/delete favorites in this navcore and also in 8.204.9718 is not working..

On another topic I noted the same problem but I found a solution - rename the favourite you want to get ride of Bin and then select another favorite you want to get ride of Bin and it replaces Bin with Bin. You can keeping using rename with Bin until you removed the unwanted favourites.

With 8.3 rev1.2 deleting favorites...

TT One V2 - navcore8300 - rev0.0 - boot5.5106 - WACE 815.2003

pas de problème chez moi.
Fonctionne très bien.
Ce soir, je fait des photos.
Je part au travail maintenant.

no problem.
Works great.
Tonight, I made pictures.
I part work.

:afraid:

(affiche déjà...en 2ème position après 4 caractères seulement!)

Works well :good2:
1.pays-lithuania
2.ville-Vilnius
3.rue: T.Na

(... is already in 2nd place!)
1 - T.Ivanausko Gatve
2 - T.Narbuto Gatve

Yes, it works when you enter first uppercase then . and then word.
But try to enter just Narbuto and you will never find that street.
The problem is that it's difficult and almost impossible to remember first upperscase letter before . sign.

It worked in navcore 8.010 with 8.10 western & central europe maps.
With 8.010 version it was enough to enter

1 - Narbuto to find T. Narbuto Gatve
2 - Ivanausko to find T. Ivanausko Gatve

I tried this Navcore (8.300.9732) with 815.2003 France card, but without success. It freezes as soon as I try to access menu.
I can access version however. It seems I'm not the only one with this problem. If somebody find a solution, tell us. :-)

By the way, Tomtom One V3 here. I'd like to try TTsystem 8.204.9718, but I'm not able to find it... (I've got basic pack, but no TTsystem)

I'm totally new on this, but thanks everyone and TTuser in particular, for tools and helps.

By the way, Tomtom One V3 here. I'd like to try TTsystem 8.204.9718, but I'm not able to find it... (I've got basic pack, but no TTsystem)
[/size]Try here
http://www.ipmart-forum.com/showthread.php?t=300929

Although the main title for this thread shows up as
x40 Navcore 8.203.9717 ttuser's initial post has the title
x40 Navcore 8.203.9717 + 8.204
Perhaps one of the moderators can amend the thread title to try & eliminate any confusion
:thanks:

bjr nicole
j'ai un tomtom v2 avec navcore 8.204 peut tu me dire comment installer le navcore 8.300 et surtout si ca vaut le coup au niveau du fonctionnement
merci

bjr nicole
j'ai un tomtom v2 avec navcore 8.204 peut tu me dire comment installer le navcore 8.300 et surtout si ca vaut le coup au niveau du fonctionnement
merci

This is an ENGLISH forum!

Hi everybody , someone can help me how to update (mapshare) with french map 8.15

Hi everybody , someone can help me how to update (mapshare) with french map 8.15

TomTomHome servers are currently down but that's how you do it.

@Flash56: Indeed, I thought it was for other GPS. I've test 8.204 and... it works, no freeze (for now). So happy !
Thanks for the link.:good2:

I'll try to play with settings this evening.

i have a tomtom v2 with navcore 8.204 it is work but how to install navcore 8.300
thanks

i have a tomtom v2 with navcore 8.204 it is work but how to install navcore 8.300
thanks

Go to first post of this topic & follow the instructions.

TomTomHome servers are currently down but that's how you do it.

I do it with TTHome 2.4

With 8.3 rev1.2 deleting favorites...

Mapshare (MAJ 25/11/2008 - WACE 815.2003)
http://www.badongo.com/file/12232273
Password: pierrot6150

Hello SeaDestroyer :partyman:

Perhaps only for TT One V2

pictures...

I have my g0720 updated with the latest ttsystem 11/21 and bootloader 55106, US map 815_2019, 8300 9732, dll file 10/11 as well as other items discussed on this thread and all works except 2 items any help would be great. havnt found solution in search yet.

1. while using home on pc the "operate my GO" gives me an error 9000 and closed the home software with a crash
Faulting application homeruntime.exe, version 1.9.0.3114, faulting module 8-300-9732-1.dll, version 8300.9732.1.0, fault address 0x00203b30.
the DLL is in correct folder for XP i renamed old file then added new file

2. my ALG or is it reality view does not present me with the screens of the lanes im in or exiting. see link http://us.support.tomtom.com/cgi-bin/tomtom_us.cfg/php/enduser/std_adp.php?p_faqid=9594&Lid=4

Hello SeaDestroyer :partyman:

Perhaps only for TT One V2

pictures...

Bro what its rar password?

Bro what its rar password?

Sorry...

see previous post

Password: pierrot6150 (forever)

Delete favorite options work for you?

Delete favorite options work for you?

Yes :LoL:

Look pictures 1, 2, 3 etc...

Yes yes I see and ask my self what I'm doing wrong, I install latest rev navcore 8.3 on clean card, cannot imagine where its problem.

sorry for my bad English (google is my friend - french belgium)

Tomorrow, I made a copy of my sd-card so that you can see my configuration.
Sleep.
Work tomorrow 6:30

Delete favorite options work for you?

Do you use the BTON switch ?
If not... DO !!! Solved this problem previously.
Personally I don't see any connection between BT and favorites, but who cares if it helps.

Upload just your ttsystem file.

Do you use the BTON switch ?
If not... DO !!! Solved this problem previously.
Personally I don't see any connection between BT and favorites, but who cares if it helps.

Yeeeeeeeeeeeeeeeeeeeah ITS WORKING!! :urtheman::urtheman:

You must spread some Reputation around before giving it to lessram again.

Yeeeeeeeeeeeeeeeeeeeah ITS WORKING!! :urtheman::urtheman:

SeaDestroyer :mad:

Stupid bton :hehe:

Yup realy bad trick but its working.Great.

What are files in basicpak?

system5.5022

system5.5106

Bootloader ore?

system5.5022 and system5.5106 are bootloaders.

I allready have bootloader 5.5022 installed but when I first bot with those 2 files my bootloader its not changed to 5.5106.

Can I delete this files from mem card?


I think TTuser has just ad this names for reminder of version becouse orginal bootloader not have any other name .... just system.

To install new bootloader you need to rename file system5.5022 (or system5.5106) to system. After it you need to boot TT and wait.

Do you realy need new bootloader 5.5106? If 5.022 works I doubt it. So you could delete these files.

5.022 work great, so.....deleting files ....... Thanks Alex :-)

I allready have bootloader 5.5022 installed but when I first bot with those 2 files my bootloader its not changed to 5.5106.

Can I delete this files from mem card?


I think TTuser has just ad this names for reminder of version becouse orginal bootloader not have any other name .... just system.The bootloader has to be named system to have any effect so if you want to upgrade your bootloader just remove the original system (if you have one) & rename the appropriate one to system and the next time you boot your bootloader will be updated. Once changed there is no going back and the system file(s) can be deleted with no adverse effect.

OOPZ You already have a similar reply
At 66 I am a bit slow in posting

@seadestroyer
u mean bootloader v 5.5022 (and not 5.022) dated 7 july of 2008.
it's the best, no need last new bootloader 5.5106
beware of 5.5105 bootloader which is buggy.

GOT THIS INSTALLED on a 510 activated uk 810 map but cant activate uk 815 map any ideas ?

i have a problem with my 630 device. When i use the original Western europe file, ASR works fine. But when i use Western_and_Central_Europe_815_2003, everything works but ASR is grey.
I use navcore 8.300 on my TT 630. I have copied the patched ttsystem file and the full ASR folder to my Tomtom.
I have tried everything, please help...

FYI seems there is a reason why the FM radio broadcast for instructions is not available on NC8.300 ( as used on a TT520)


Thank you for contacting TomTom Customer Support regarding your TomTom FM Transmitter.
Your reference for your query is 08xxxxxxxxxxx.

We understand that you are concerned about the recent change to the TomTom application which has disabled FM Transmission of navigation instructions. We deeply regret that it has become necessary for us to implement this change, as our FM Transmission technology was a unique innovation at the time of its release.

Unfortunately, due to recent legislation, it is no longer allowed to occupy an unused FM frequency unless audio transmission is constant. Because the signal that carries your TomTom's voice instructions is not constant (voice instructions are only given occasionally, as needed) it has now become illegal to transmit this kind of audio via FM radio transmission.

We regret that this feature can no longer be offered under the current legal restriction.

Please feel free to contact us in case you have any further questions.

With Best Regards

I have owned a *Sirius Radio since they 1st came out
*Satellite Based Radio

Couple months ago, I recieved a letter from Sirius Corp. The letter was to warn me not to use the FM Transmitter that's a feature of my particular unit.

The explanation was somthing to do about FCC complaints and FCC requirements. I did not read the small print cause I don't use the FM Tranny thangy.

So, I kinda believe all this TT stuff is prolly related to some kinda "common" problem caused by the FCC

....just as the saying goes on Sirius, "FUK THE FCC"

@seadestroyer
u mean bootloader v 5.5022 (and not 5.022) dated 7 july of 2008.
it's the best, no need last new bootloader 5.5106
beware of 5.5105 bootloader which is buggy.

Totally agree with you.I was reading about sometimes buggy 5.5105/6 bootloader.5.5022 its the best.

http://img136.imageshack.us/img136/9042/go710az3.jpg
:good2::good2::good2:

for those that are having issues with getting yours converted to the latest and after reading this thread still have issues download this doc and it should clear the mud or stir it up some more. http://rapidshare.com/files/167635384/create_tomtom_NA_map.zip

Hello, Does someone knows how to reactivate the blue tooth remote controle after the upgrade to 8.300.9732 with wce8.15? Before with the original, the FM transmitter for music and the remote control worked fine but after the upgrade both refuse. bton and fmon in the root didn't do the trick.