Wojtaz
23rd November 2008, 12:29
Hi! I'm Polish, it's my tutorial from www.ipmart-forum.pl (http://www.ipmart-forum.pl/showthread.php?t=4056).
My English is bad and I am sorry for my errors :P
Go!
Opening PSP 2000x
1. We need
PSP, screwdriver and any cloth to clean LCD.
http://img355.imageshack.us/img355/4420/zdjcie122pb1.th.png (http://img355.imageshack.us/img355/4420/zdjcie122pb1.png)
Remeber! Time we do not hurry :)
2. Screw-locking Open
http://img373.imageshack.us/img373/2528/zdjcie123tr2.th.png (http://img373.imageshack.us/img373/2528/zdjcie123tr2.png)
http://img385.imageshack.us/img385/9931/zdjcie124lz8.th.png (http://img385.imageshack.us/img385/9931/zdjcie124lz8.png)
http://img380.imageshack.us/img380/3298/zdjcie125in6.th.png (http://img380.imageshack.us/img380/3298/zdjcie125in6.png)
to remove the 4 we need remove plomb gwaranty = lost gwaranty.
3. Opening PSP
When we remove all "Screw-locking", can remove front panel:
http://img512.imageshack.us/img512/1469/zdjcie126lf3.th.png (http://img512.imageshack.us/img512/1469/zdjcie126lf3.png)
But carefully to what you did not break. When something does not want to go and make sure that all Screw-locking are twisted.
So everything should look after downloading:
http://img114.imageshack.us/img114/3493/zdjcie127xn6.th.png (http://img114.imageshack.us/img114/3493/zdjcie127xn6.png)
4. Exchange keys/analog
To replace analogue just slightly undermine him, and he comes up:
http://img407.imageshack.us/img407/8003/zdjcie128ac1.th.png (http://img407.imageshack.us/img407/8003/zdjcie128ac1.png)
Buttons is another question.
To replace the trestle must first pull out "rubber", then you can cross.
By sharing d-Pad, catching the eraser at the top of the right hand slowly and gently, download it, assuming it is enough to put all of these "pin CE" as to whether there who will.
http://img522.imageshack.us/img522/8545/zdjcie130ta1.th.png (http://img522.imageshack.us/img522/8545/zdjcie130ta1.png)
To replace the beam home start, it needs to be slow to catch on the left or the right hand there and pull slowly, in the middle is the glue. I am alone in its snap-off, so I suggest careful. But wsadziłem start and kept separately for happiness, though a bit years I mean I can move it, but do not go anywhere.
http://img171.imageshack.us/img171/9015/zdjcie131ww5.th.png (http://img171.imageshack.us/img171/9015/zdjcie131ww5.png)
5. Submit PSP
Once it's replaced, it must be made within one whole.
You have to watch out for debris.
I recommend doing this steamy bathroom.
So, yes, carefully insert the front panel, Screw in a few screws and enable the PSP to see whether the dust is not on display, and that all other work (sound, buttons, etc.). When it is ok, all Screw Screw-locking and look forward to your PSP.
My English is bad and I am sorry for my errors :P
Go!
Opening PSP 2000x
1. We need
PSP, screwdriver and any cloth to clean LCD.
http://img355.imageshack.us/img355/4420/zdjcie122pb1.th.png (http://img355.imageshack.us/img355/4420/zdjcie122pb1.png)
Remeber! Time we do not hurry :)
2. Screw-locking Open
http://img373.imageshack.us/img373/2528/zdjcie123tr2.th.png (http://img373.imageshack.us/img373/2528/zdjcie123tr2.png)
http://img385.imageshack.us/img385/9931/zdjcie124lz8.th.png (http://img385.imageshack.us/img385/9931/zdjcie124lz8.png)
http://img380.imageshack.us/img380/3298/zdjcie125in6.th.png (http://img380.imageshack.us/img380/3298/zdjcie125in6.png)
to remove the 4 we need remove plomb gwaranty = lost gwaranty.
3. Opening PSP
When we remove all "Screw-locking", can remove front panel:
http://img512.imageshack.us/img512/1469/zdjcie126lf3.th.png (http://img512.imageshack.us/img512/1469/zdjcie126lf3.png)
But carefully to what you did not break. When something does not want to go and make sure that all Screw-locking are twisted.
So everything should look after downloading:
http://img114.imageshack.us/img114/3493/zdjcie127xn6.th.png (http://img114.imageshack.us/img114/3493/zdjcie127xn6.png)
4. Exchange keys/analog
To replace analogue just slightly undermine him, and he comes up:
http://img407.imageshack.us/img407/8003/zdjcie128ac1.th.png (http://img407.imageshack.us/img407/8003/zdjcie128ac1.png)
Buttons is another question.
To replace the trestle must first pull out "rubber", then you can cross.
By sharing d-Pad, catching the eraser at the top of the right hand slowly and gently, download it, assuming it is enough to put all of these "pin CE" as to whether there who will.
http://img522.imageshack.us/img522/8545/zdjcie130ta1.th.png (http://img522.imageshack.us/img522/8545/zdjcie130ta1.png)
To replace the beam home start, it needs to be slow to catch on the left or the right hand there and pull slowly, in the middle is the glue. I am alone in its snap-off, so I suggest careful. But wsadziłem start and kept separately for happiness, though a bit years I mean I can move it, but do not go anywhere.
http://img171.imageshack.us/img171/9015/zdjcie131ww5.th.png (http://img171.imageshack.us/img171/9015/zdjcie131ww5.png)
5. Submit PSP
Once it's replaced, it must be made within one whole.
You have to watch out for debris.
I recommend doing this steamy bathroom.
So, yes, carefully insert the front panel, Screw in a few screws and enable the PSP to see whether the dust is not on display, and that all other work (sound, buttons, etc.). When it is ok, all Screw Screw-locking and look forward to your PSP.