Garmin Mobile XT on Nokia touch screen devices (5800)

[Only registered and activated users can see links]


Garmin Mobile is compatible with the operating system Symbian S60 V5 in general.
In the early stages of testing it was noted that programs like Garmin and Route66 are installed without problems, but they did not receive the commands because of the lack of a physical keyboard. This problem was solved, however, using software that will create a virtual keyboard on the display, the Garmin is able to recognize almost seamlessly.
In essence, from today you can use Garmin Mobile XT also on Nokia devices touchscreen. To get the Garmin, you must follow this simple guide, which I have not tested coz i'm not currently in possession of a terminal Touch, but I know that has been tested by many other users.


GUIDE FOR USE GARMIN MOBILE XT ON NOKIA Touch
With this method, the navigator works perfectly, but the only limit is the inability to enter the house number of an address. Perhaps this little bug will be fixed in the meantime you can navigate to our goal.

1) Install the Garmin Mobile XT.

2) Install VirtualKey on the phone's memory (important!) And Sign it, you can download free from here:
virtualkey ([Only registered and activated users can see links] are.by.Luomao2000.rar)

The start it and at once we close it to let him to create the directory that we shall need later.
3) Download custom2.keymap attached
Connecting your phone to the PC and enter in:
E: \ private \ e7d61da9 \ (where E is the memory card)
And copy custom2.keymap

4) Unplug the phone from the PC, start Virtual Key, go to Options / Load Mode / Custom Mode 2, Exclude, Option / Change Mode / Includes. Then Options / Add from installed, choose Gmobile xt, Select, Cancel, Back (to let Virtual Key to remain in the background).

that means:
== Settings tab Options-> Load mode-> Custom Mode 2
Exclude Tab == Option-> Change mode-> Include
Includes == Tab Options-> Add-installed from> Gmobile XT-> Select

It 's all. The procedure is finished, we will be able to use the Garmin on Nokia TouchScreen and other devices with Symbian S60 V5 touchscreen.



You can find Garmin XT here:
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

i can't install virtualkey. i think i still needs to sign it. how to sign it?

i have already signed it. however it seems that the custom2.keymap is not loaded although i have already copied it to the memory card. i have installed virtualkey on phone memory also... and there's no keyboard displayed...

I am trying to install virtual kb too and it gives me a error message 'Certificate Error - Contact supplier'. I am assuming its coz the cert is not signed. How do I sign it?.

Nice man..thx...working good

which garmin version able to run in 5800?

i 'm able to install 4.00 and 5.00 but when try to run there's no response...

i really not understand bout this, sorry at first,
somebody can post the picture, showing the step. thank guy.

Nice man..thx...working good

good to hear it works, can you explain what version you installed etc.

This is not official released from garmin, its just a method/alternative to run this apps.

@emonty
garmin xt 5.0
then install the apps above in memory card...
and set it like the steps above...and you're done... :) :)

@lulubamba
can you tell me how to costumize the key????
already google..no help found how to costumize the virtual key...tq :) and sorry for bad English

If we begin with questions like "how to sign" here , then the thread becomes useless. Please guys try to address those somewhere else. You need to get a certificate from the Request Your Certificate Here thread and that's it. Let the man describe the method in more detail, like version of garmin used , how to customize the keymap and so on. And please those who tried dont just say thank you, but let us know that it also worked or not.:)

Installed 5.20, work good so far!!! :triodance:

Installed 5.20, work good so far!!! :triodance:
Great but tell me something, after you install it, you alwas have to use that keymap or it works by touch UI?

Great but tell me something, after you install it, you alwas have to use that keymap or it works by touch UI?

Traffic updates work, weather forecast, google search, spoken info in dutch etc. :thanks::thanks::thanks: rep+ added

some key work ok, not all, still need BT keyboard to go back from some menu's

All we need now is somebody to solve the issue of going back and foreword in the menu's without using BT keyboard, then it works good. Traffic updates work, weather forecast, google search, spoken info in dutch etc. :goodluck:

mine managed to work without the BT keyboard... :) just use the VirtualKey as TS told us..and you can just use your call button as the left softkey menu and hang up button as the right softkey menu...and camera button to go down on some menu in garmin.. :)

mine managed to work without the BT keyboard... :) just use the VirtualKey as TS told us..and you can just use your call button as the left softkey menu and hang up button as the right softkey menu...and camera button to go down on some menu in garmin.. :)

how did you configure the scrolling down of some menus? i can't use the custom2.keymap as virtualkey doesn't read it...

I can't find E:\ private\ e7d61da9 on my phone, so I can't do step3. Help me please.. Thanks

I can't find E:\ private\ e7d61da9 on my phone, so I can't do step3. Help me please.. Thanks

You MUST install virtualkey on memory card, not in phone's memory...

Its old 3rd version with virtualkey? Not good=(

You MUST install virtualkey on memory card, not in phone's memory...

now i got it. it's now working! thanks a bunch! :urtheman:

i get a certificate errer when trying to install the virtual key app,

Any suggestion?

i get a certificate errer when trying to install the virtual key app,

Any suggestion?

suggestion: sign the app

Please can you help me?
How to do to make it works with the 5800 internal GPS it still asking me to activate the bluetooth???

thanks a lot in advance ...

Please can you help me?
How to do to make it works with the 5800 internal GPS it still asking me to activate the bluetooth???

thanks a lot in advance ...

You do not have the correct codes (SW.unl and gmapsup.unl)
when all is okincluding the correct device id, then you will see the internal GPS.
check ipmart, and search garmin xt :goodluck:

I installed 5.00.10s60.9 version....I can run can control the garmin...
BUT I cant find the gps device when trying to pair new gps? I do not get it?
We need bluetooth for it??? Pls advice...THX

I installed 5.00.10s60.9 version....I can run can control the garmin...
BUT I cant find the gps device when trying to pair new gps? I do not get it?
We need bluetooth for it??? Pls advice...THX

same 4you, see my previous post :goodluck:

You do not have the correct codes (SW.unl and gmapsup.unl)
when all is okincluding the correct device id, then you will see the internal GPS.
check ipmart, and search garmin xt :goodluck:

I already checked ipmart and took the current one but still the same problem, and I cannot enter into the system or I forget where it is,to see the device ID.
Can you help me please?

Thanks

I already checked ipmart and took the current one but still the same problem, and I cannot enter into the system or I forget where it is, because to seen the device ID.
Can you help me please?

Thanks

device id you can find: tools, settings, about, then you see
Garmin Mobile XT Version .... and uderneath you will find key-esn:.....

the problem is that I cannot see "about" I see system, card, garmin online, but not about, maybe it will be below but I cannot have access through # buttom.

the problem is that I cannot see "about" I see system, card, garmin online, but not about, maybe it will be below but I cannot have access through # buttom.

the # is now the "camera" key if you have installed virtual key correctly

you're right thanks for your help I will modify the necessary file thanks a lot for your great support

Noob question, any1 know where to get latest map?
can show me link? Thx...

great man put how can i download maps and if meddle east areas are supported in maps

with many regards

I installed 5.00.10s60.9 version....I can run can control the garmin...
BUT I cant find the gps device when trying to pair new gps? I do not get it?
We need bluetooth for it??? Pls advice...THX

My friend in order to install Garmin, you have to install Virtual Keyboard?Or there is a possibility to install previous version of Garmin 5.00.20 without VK?
My problem is that i don't know how to singup an application.

My friend in order to install Garmin, you have to install Virtual Keyboard?Or there is a possibility to install previous version of Garmin 5.00.20 without VK?
My problem is that i don't know how to singup an application.

Check it out !

[Only registered and activated users can see links]

@emonty, asking for reputation not aloud in this forum, you should know it by now.
@lulubamba, great share, thanks for it, now the 5800 owners can finally navigate :D: repp+

perfect! thx :):thanks::LoL::good2:

Check it out !

[Only registered and activated users can see links]

Thanks a million for that tip, worked signing it no problem but the application was in another language i had to do a bit of guess work there.


anywho next question, It says at the start install it on the phone memory but you say install it on the memory card memory so thats what i did, i still can't see the folder marked "private"

Please advise, thanks in advance

Check it out !

[Only registered and activated users can see links]

A Great thank you!!! :-)

i finally figured it out. to find that folder marked private' you have to only access the folders on your phone through using the phone in mass storage,

Now everything worked as far as installing and copy/pasts and doing the settings inside of virtualkey but when it comes to using garmin nothing worked, any word/button at the bottom of the screen will not work,there is no way to press back or menu please advise,

I think i'll go back to old faitfull nokia su-8w bluetooth keyboard. The big problem do we all know is the map roads mess up when putting it in landscape mode and garmin looks a bit silly in portrait mode because the phone isnt wide enough.

see i want to be able to use garmin in wide screen mode through my phone wired into my sunviser screen, simply just because i can i already have a garmin nuvi

Hi all,

Managed to get GMXT working on my Tube last nite. Drove to office this morning with voice navigation...cool. For tutorial on setiing up Virtual Key go to this link:

[Only registered and activated users can see links]

Cheers

nice very nice indead, that a nice tutorial on mapping the virtualkey, i had an idea also, when putting the maps in 3D view and in lanscape the roads breat up so i wonder putting it just in track up mode will it look and feel much better, ill hace to wait till tomorrow to try in the screen in my car. off to bed!!

Hi guys,

I also can manage garmin on my 5800 last night..after installing virtual key....Thanks to all for helping me... if not I would be frustrated because having my internal gps that cannot work.. Now I'm very happy with my 5800..Thanks again.

Turn bluetooth gps to internal gps in the options...

Actually you don't need to turn your bluetooth on because 5800 has built in GPS receiver.. but some cases it would not detect the internal GPS due to Garmin XT is not registered..It will work fine if you had your garmin xt application registered...thanks..

Weird, I did have to change it manually, after "registeration" it still tried to detect BTGPS..

Noob question, any1 know where to get latest map?
can show me link? Thx...

Last map for what ? (country)

For maps check this thread:
[Only registered and activated users can see links]
Or simply just search in this section:
[Only registered and activated users can see links]
There are lot of them, including latest ones.

Weird, I did have to change it manually, after "registeration" it still tried to detect BTGPS..

Hi, just take a look at your sw.unl file..I think the file is named wrongly as sw.unl.txt... just rename the file as sw.unl.... thats all.. hope it helps.
Thanks.

works perfectly (5.00.20) with virtualkey, thanx! :)

Just got 5.00.20 working with Nordics maps in 5800 XM, works perfectly!

Very big thanks, rep + =)

My Tips

Firstly there is a few problems one being when you have it in 3D view the road lines break up in landscape mode so its not usable. and 2ndly it's not possible to scroll when using virtualkey so i suggest the following.

1, Put the view in track up mode.
2, use your own or borrow a bluetooth keyboard just needed one time to scroll and set it up in setting to turn the "turn preview" on. By the way you need to install the keyboard app before pairing and i suggest nokia's su-8w keyboard.

Thats it. I suggest getting a phone mount on ebay and put the phone in landscape mode. I myself got a sunvaser screen and wired the supplied tv cable into the stereo and screen so after doing some tests this morning and setting up up nicely i now have Garnin mobile XT from my phone coming out nice and big in the sunviser screen. then if i want to i can sit the keyboard on my lap and there you go, a built in home computer to watch movies, view/edit photos and nav with garmin. All powered by the nokia 5800

P.s thank you so much for virtualkey, its perfect once the keys are mapped

My Tips

2ndly it's not possible to scroll when using virtualkey so i suggest the following.

use your own or borrow a bluetooth keyboard just needed one time to scroll and set it up in setting to turn the "turn preview" on. By the way you need to install the keyboard app before pairing and i suggest nokia's su-8w keyboard

In my 5800 XM scrolling and changing those settings you described are possible with touch screen and three buttons.

I have admit that my "works great" in my previous post was too early. I was testing that and like someone said it isn't really real time location. Though I've stopped walking, routing shows that I'm still moving. I have also navigator for the car and that is really accurate.
Is there any fix for that or is it just bad software and weak hardware...

I would suggest that we all wait for the new version from Garmin which will officially be compatible with S60V5 touchscreens,any other attempt to make the older versions able to be executable is just a waist of time imho.Patience and I think we wont be waiting for long,there is some inside chat(in the net) for this new version to be soon available(maybe even February +).

I would suggest that we all wait for the new version from Garmin which will officially be compatible with S60V5 touchscreens,any other attempt to make the older versions able to be executable is just a waist of time imho.Patience and I think we wont be waiting for long,there is some inside chat(in the net) for this new version to be soon available(maybe even February +).

Why buy toy if you can't play with that? ;) Besides Nokia maps without 70€ license, is pretty much useless. And ppl want to use their GPS now...

who can tell me virtualkey how to signed ??
help me pls....

Yayyy.. Works pretty great. Anyone else facing a problem same as me? When I scroll trough the map, it sometimes just freezes (when zooming in, or as zoomed in to "street mode" and scrolling). Just freezes the whole phone for about 10-20 seconds and throws you back to phone menu..

This is offtopic but I just read an online manual of 5800XM and in it is written that the device has built in geotagging.

You can read the actual proof over here
[Only registered and activated users can see links]

Just search for 'Camera' and expand it to read 'Location information'

Following is what it says for those lazy like me.


Location information
You can automatically add capture location information to
the file details of the captured material.
Select Menu > Applications > Camera.
To add location information to all captured material, select
Options > Settings > Show GPS info > On.
Location information indicators:
● — Location information unavailable. GPS stays on in
the background for several minutes. If a satellite
connection is found and the indicator changes to within
that time, all the images captured and video clips recorded
during that time are tagged based on the received GPS
positioning information.
● — Location information is available. Location
information is added to the file details.

:goodluck: Here's to hoping Nokia will add this functionality natively in a future firmware.

[/offtopic] :ilove:

Hahaha, there ain't no god damn "show gps info" in my camera settings haha. :D

I know, that's my point too. Why its in the user manual and not in the actual device is puzzling. But it was there, that's the good news!

[Only registered and activated users can see links]

my nokia5800xm working good!!!
garminXT 5.00.20

seriously right now the garmin app is not for 5800 but it just can be used but not as perfect due to some bottons which are not there.... anyway it ok with me because something is better than nothing and it is better than waiting for two or three month for the exact application for 5800.....

yes... it works.. tq
but when browse will laggy or hang

i have follow the step
1. request cet
2. sign virtual key and garmin mobile xt (sis)
3. install signed sis
4. copy custom2.key to private\e7d61da9
5. run vitrual key and do the setting u mention
6. start garmin.
** call and reject button = ok , back button

yup...sometimes it hanged..abd you need to restart the garmin application....I think it is a normal thing because we are using incompatible application..but yet still we can enjoy the GPS.

You do not have the correct codes (SW.unl and gmapsup.unl)
when all is okincluding the correct device id, then you will see the internal GPS.
check ipmart, and search garmin xt :goodluck:

I don`t understand this part. I simply dont know how to get the internal gps working and I can`t find files like SW.unl and gmapsup.unl :(

I also dont have the option to use internal gps in the garmin settings.
The Program doesnt recognize the gps :/

Help

I don`t understand this part. I simply dont know how to get the internal gps working and I can`t find files like SW.unl and gmapsup.unl :(

I also dont have the option to use internal gps in the garmin settings.
The Program doesnt recognize the gps :/

Help





You need to start garmin once, press "connect to garmin gps" or something like that.. It doesn't find any garmin gps device (of course, if you don't have a one). Skip that or press cancel or something like that.

The it throws you to the garmin menu screen. It says "Where to?" and "Show map" with big icons. There's also 3 smaller icons: 1 with sun and cloud, 1 with wrench and 1 with X marked on it. Press the one that looks like a wrench.

The go to settings and find info or something like that (i don't remember what it was in english, because i changed mine to own language.)
Anyway the info icon is same as the garmin icon in your phone menu.

There reads IMEI: ##########, IMSI: ########## and UNIT ID: ########## or something like that, write that unit id down somewhere.

Then you need to open garmin keygen, put that unit id there, select garmin mobile xt and press generate.

Open up a notepad, copy&paste that code what you got from keygen to the notepad. Press file/save as. Then you write SW.UNL to the file name field and select All Files for save as type.


At the same time you can generate key for map with the same tool. Open new notepad and paste that mapcode you got from garmin keygen. Save as type all files (again) and filename GMAPPSUP.UNL IF THE MAP IS NAMED GMAPPSUP

@obsi if you want to help someone, do it with calm and with an appropriate and decent language.
@Phrixotrichu Read this tutorial carefully:
[Only registered and activated users can see links]

thank u very much everything working now :)

Good, underlined and CAPSED those because they are critical points. :)
****ing_map_for_****ing_country was a half-of-a-joke, because didn't want to put there any specific country.

Sorry if it felt offending for someone.

Installed 5.20, work good so far!!! :triodance:how to install garmin 5.20 pls help me!!!! pls!

hai, I already try to install on my 5800, but it doesn't work at all, already installed but it can not run, could you tell me what should I do?

by the way, what is the meaning of "standalone multilingual Garmin XT"?
do I have to install the previous version of garmin first before I install the 5.20?
:confused:

Need help..
thank you..

my nokia5800xm working good!!!
garminXT 5.00.20

haiii...could you please tell me how to install it on 5800XM...I'm so desperate..
thanks before...

For me it installs extremely wrong , because there is no installer (exe file) , but only some files that you need to copy to the root folder. The menu is so messed up that I immediatley gave it up and installed 5.10, which works great.

haiii...could you please tell me how to install it on 5800XM...I'm so desperate..
thanks before...

i don't get it, there is a full and accurate instruction on the first page. did you follow it?

i don't get it, there is a full and accurate instruction on the first page. did you follow it?

yes, I already have garmin XT 5.0.20 installed on my tube, but when I try to run it, there's no respon at all...
Do I need to have the previous version of Garmin XT before I install the Garmin XT 5.0.20.
could you tell me, which source of garmin XT did u used ?

I got the garmin XT 5.0.20installer from this link :
[Only registered and activated users can see links]
and in those thread I download the installer from this source :
Standalone Multilingual Full Version Download:
[Only registered and activated users can see links]

Need guidance please...

Step by step for Nokia 5800:


- Get the 5.0.20 Standalone + Keygen
- Download VirtualKey and get it signed
- Download the custom2.keymap



Installing Garmin:

- Plug in ur Phone. Extract the files in the copytommc-folder to the root of your Micro-SD-Card
- Either use the Nokia PC-Suite to install garmin (on the card) via the .sis-File or copy it over to the sd card and use the programmanager. Do not start the Program yet!



Setting up VirtualKey:

- Install ur signed virtualkey (another .sis) on the micro-sd-card.
- Start VirtualKey.
- Close VirtualKey.
- Copy the custom2.keymap in the Card:\private\e7d61da9 folder.
- Start VirtualKey. Load the custom2-profile.
Then scroll to the right and change the mode to Include. Go to Options/Add/Add from installed and choose Garmin.
Get back to Settings(left), then go to options/save as/custom2.
Then choose "run in background" and u`re done.



Getting Garmin to use ur internal GPS + getting Maps:

- Start up Garmin and navigate (green is yes, red is no, camera = down, +touch) to "info" and write down ur card-id.
- Use the keygen to create an id which u write down in a textfile u name "SW.UNL" (it needs to be a real .unl file, NOT only per name)and copy over to the "Garmin"- Folder on the Phone-Card. Do not close the Keygen yet.
- Copy your maps (.img) to the garmin folder.
- Create an id for the map u want with the keygen. Copy the id to a file u name nameofthemapfile.UNL and copy it over to the "Garmin" folder on ur Phone.

The next time u start Garmin u can chose the internal GPS and have ur maps ready. Dont forget that u need virtualkey running in the background.

And u might wanna rename CardRunner.dll in the Card:\sys\bin folder to CardRunner.bak or CardRunner.old as it kills off a service which really drains a lot of accu-power.
But that only stops the service from autostarting together with the phone.
It is active as soon as u start garmin and stays active! So u better restart ur Phone every time u`re done navigating.


greetings
Phrix

good instruction. here's where i got my garmin (polish map included [gmapsupp.img], you can delete it):


[Only registered and activated users can see links]

virtual key (to be signed):


[Only registered and activated users can see links] are.by.Luomao2000.rar

remember to uninstall and delete any files of your previous garmin

Step by step for Nokia 5800:

Setting up VirtualKey:

- Install ur signed virtualkey (another .sis) on the micro-sd-card.
- Start VirtualKey.
- Close VirtualKey.
- Copy the custom2.keymap in the Card:\private\e7d61da9 folder.
- Start VirtualKey. Load the custom2-profile.
Then scroll to the right and change the mode to Include. Go to Options/Add/Add from installed and chose Garmin.
Get back to Settings(left), then go to options/save as/custom2.
Then chose "run in background" and u`re done.



Thanks a lot, I will try, so let me confirm once again, I install the signed virtual key on the micro sd card rite? not in the phone memory?

it doesn't matter where

it doesn't matter where
I recommend the card since u want the e7xyz-folder in card:/private

I recommend the card since u want the e7xyz-folder in card:/private

my mistake :sorry: remember to run VK always before running garmin

I recommend the card since u want the e7xyz-folder in card:/private

Hai there, thank you so much, now garmin XT already running in my tube...

I have question regarding the map, I have download my map: gmapsupp.img, and I already copy it to the garmin folder in my card.
When i use the keygen to generate the map id for it, i wrote the id : 123
and then I generate the unlock code, let say 678****** then I copy the unlock code into the file named as gmapsupp.unl
Is it the correct step?

maybe this one is a stupid question, but forgive me for my stupidity I need to be assured:
when running the garmin XT, it should be on the assisted GPS mode rite?
and when I use view map menu it's showing "no map", my prediction of this case is because I'm in a building...so I guess maybe I should use in an open area?? is it correct?...
or should there be more configuration?

:thanks:

yes, you paste the software unlock code into sw.unl and the map unlock code into gmapsupp.unl.
i recommend using only "integrated gps" option, that way the phone won't download any data over the internet (btw roaming internet fares are insane). after running garmin for the very first time it will show you no map until you receive proper gps signal. after that you can freely browse the map even without getting a fix on your position. hope this helps :)

Anyone heard anything about the new version for touch screen mobiles of Garmin yet?

Step by step for Nokia 5800:


- Get the 5.0.20 Standalone + Keygen
- Download VirtualKey and get it signed
- Download the custom2.keymap



Installing Garmin:

- Plug in ur Phone. Extract the files in the copytommc-folder to the root of your Micro-SD-Card
- Either use the Nokia PC-Suite to install garmin (on the card) via the .sis-File or copy it over to the sd card and use the programmanager. Do not start the Program yet!



Setting up VirtualKey:

- Install ur signed virtualkey (another .sis) on the micro-sd-card.
- Start VirtualKey.
- Close VirtualKey.
- Copy the custom2.keymap in the Card:\private\e7d61da9 folder.
- Start VirtualKey. Load the custom2-profile.
Then scroll to the right and change the mode to Include. Go to Options/Add/Add from installed and choose Garmin.
Get back to Settings(left), then go to options/save as/custom2.
Then choose "run in background" and u`re done.



Getting Garmin to use ur internal GPS + getting Maps:

- Start up Garmin and navigate (green is yes, red is no, camera = down, +touch) to "info" and write down ur card-id.
- Use the keygen to create an id which u write down in a textfile u name "SW.UNL" (it needs to be a .unl file, not only per name)and copy ove to the "Garmin"- Folder on the Phone-Card. Do not close the Keygen yet.
- Copy your maps (.img) to the garmin folder.
- Create an id for the map u want with the keygen. Copy the id to a file u name nameofthemapfile.UNL and copy it over to the "Garmin" folder on ur Phone.

The next time u start Garmin u can chose the internal GPS and have ur maps ready. Dont forget that u need virtualkey running in the background.

And u might wanna rename CardRunner.exe in the Card:\sys\bin folder to CardRunner.bak or CardRunner.old as it kills off a service which really drains a lot of accu-power.
But that only stops the service from autostarting together with the phone.
It is active as soon as u start garmin and stays active! So u better restart ur Phone every time u`re done navigating.


greetings
Phrix

why i do not able to allocate "CardRunner.exe" in Card:\sys\bin?
i only saw CardRunner.dll :confused:
pls advice?

CardRunner.exe is a mistake, look for CardRunner.rsc and rename it to CardRunner.rsc.bak (it should be in resource/plugins)

yes, you paste the software unlock code into sw.unl and the map unlock code into gmapsupp.unl.
i recommend using only "integrated gps" option, that way the phone won't download any data over the internet (btw roaming internet fares are insane). after running garmin for the very first time it will show you no map until you receive proper gps signal. after that you can freely browse the map even without getting a fix on your position. hope this helps :)

Okay, I get it now, btw what u mean by "integrated GPS " is assisted GPS (use attached/Built in GPS) rite?
After I put the sw.unl to my garmin folder and when I see the settings-->about, it will display "Unlock ESN:xxxxxxxx", is it the correct display?

yes, in garmin you should use the built-in gps only. go to settings>phone>application sett.>positioning>positioning methods and uncheck everything except "integrated gps". then start garmin and go to tools>settings>system>remote gps and verify, that it's using integrated gps.
if in garmin you see "Unlock ESN: number" it's correct

double, please delete :sorry:

Hi Ya All,I`m sure that what i`m gonna post was already posted somewhere,for all garmin xt user (symbian),if u want to upgrade to lattest version ,just download a file from garmin,unpack it ovewrite garmin folder on your device from unpack files and copy garmin.sis to your device and run it on your device,pls be advice if u want to keep your maps and other stuff,copy only apps folder from garmin,it should work,I have done on my n95 8g 3 times,still running with no problems and with traffic,speed cam etc

yes, in garmin you should use the built-in gps only. go to settings>phone>application sett.>positioning>positioning methods and uncheck everything except "integrated gps". then start garmin and go to tools>settings>system>remote gps and verify, that it's using integrated gps.
if in garmin you see "Unlock ESN: number" it's correct

Hai, thankyou so much for your help :thanks:..it run perfectly...
:urtheman:

good to hear :)

CardRunner.exe is a mistake, look for CardRunner.rsc and rename it to CardRunner.rsc.bak (it should be in resource/plugins)

Cardrunner.exe was indeed a mistake, it is a dll.

but the directory is correct. Sys/bin

Cardrunner.exe was indeed a mistake, it is a dll.

but the directory is correct. Sys/bin

i googled around and some dudes recommend adding the bak extension to sys/bin/cardrunner.dll AND resource/plugins/cardrunner.rsc. i changed them both, garmin still works

Thank you very much. It works great!!!
:thanks:

whwr can i Find 3) Download custom2.keymap ????????

please HELP ME

whwr can i Find 3) Download custom2.keymap ????????

please HELP ME

[Only registered and activated users can see links]

folks wr i can find keygen for garmin??:confused:

folks wr i can find keygen for garmin??:confused:

here you go, keygen attached

Where can i find unit ID referred to in the Key generator? Please help

Where can i find unit ID referred to in the Key generator? Please help

run garmin, go to tools>settings>about

Thanks for replying my post but the problem now is that i use nokia 5800 touch screen and garmin is not coming on at all, i saw on this forum that i can download virtual key but the virtual key itself is not installing(corrupt) please where can i download a good virtual key file?
Thanks

Thanks for replying my post but the problem now is that i use nokia 5800 touch screen and garmin is not coming on at all, i saw on this forum that i can download virtual key but the virtual key itself is not installing(corrupt) please where can i download a good virtual key file?
Thanks

virtualkey and custom2.keymap attached

Hi, I've already installed Virtualkey and Garmin, Workingvery well. I can go down with the press of camera button on the menu screen, but when i search a name in spell name and then press camera button, it goes to search mode again, Anyone have this problem and the fix, please advise, also does anyone knows how to edit the keymap file?

when i search a name in spell name and then press camera button, it goes to search mode again

you're unfortunately right, i didn't know about that :( you can always spell the full name of whatever you're looking for and pray that it comes up on the list :)

i googled around and some dudes recommend adding the bak extension to sys/bin/cardrunner.dll AND resource/plugins/cardrunner.rsc. i changed them both, garmin still worksonly the first one matters for it kills tsrautostart (use a taskmanager to verify it is gone afterwards) or sth similar (dunno the exact name anymore)which autostarts with the phone and drains accu-power.

you're unfortunately right, i didn't know about that :( you can always spell the full name of whatever you're looking for and pray that it comes up on the list :)

hai there..could you help me again where can I find the guidance for installing Garmin is Sony Ericsson P900i?
thanx before :D

hai there..could you help me again where can I find the guidance for installing Garmin is Sony Ericsson P900i?
thanx before :D

In the symbian UIQ section of course:
[Only registered and activated users can see links]

hi.i cannot instal virtualkey...the phone say not compatible with the phone,end certificat error...please help me with this,the garmin its allready instaled,but i have the problem with touchscreen,i cannot do enithing.thanks thanks:suicide .ps" i have nokia 5800 ::suicide::suicide:

hi.i cannot instal virtualkey...the phone say not compatible with the phone,end certificat error...please help me with this,the garmin its allready instaled,but i have the problem with touchscreen,i cannot do enithing.thanks thanks:suicide .ps" i have nokia 5800 ::suicide::suicide:

first you must sign virtualkey with your own certificate, then you install it. please search the forum, there's an appropriate topic about this

Is somebody know any method to change the colors or skins? Defaults are very ugly.

i dont understand dat...
i've copied the code in notepad but the extension comes out 2 b
SW.UNL.txt nd when i copy dis file in mcard garmin folder...nothing seems 2 work when i open garminxt..:confused:
ne help on dis

i dont understand dat...
i've copied the code in notepad but the extension comes out 2 b
SW.UNL.txt nd when i copy dis file in mcard garmin folder...nothing seems 2 work when i open garminxt..:confused:
ne help on dis

Delete .txt, it should be SW.UNL. It will work.

SW.UNL.txt can b seen when open the properties column....
but without it its just SW.UNL
hope u can understand my point...
is der neway 2 remove the extension?

SW.UNL.txt can b seen when open the properties column....
but without it its just SW.UNL
hope u can understand my point...
is der neway 2 remove the extension?

I think i was clear, yes, remove TXT extension, the file should be just SW.UNL

in dat case i did remove txt but its still not working...
actual file name is SW.UNL but when i open the properties its showing
file type txt but file name is SW.UNL..
plz mk me understand if im going wrong

in dat case i did remove txt but its still not working...
actual file name is SW.UNL but when i open the properties its showing
file type txt but file name is SW.UNL..
plz mk me understand if im going wrong

Use your phone to do it, use one of file browsers, like Xplore, ActiveFile, Y-browser.

i did change the extensions by using explorer....
but still unable 2 use internal gps..
its really depressing..

i did change the extensions by using explorer....
but still unable 2 use internal gps..
its really depressing..
On your Windows, go to My Computer (or any folder). In the folder options uncheck the "Hide extensions for known file types". After it you should see SW.UNL.TXT in the folder where it is. Now, you can delete ".txt" by rename...
If you don't use windows, tell me.

i did change the extensions by using explorer....
but still unable 2 use internal gps..
its really depressing..

use a file manager like servant salamander or total commander

Hi to all forumers, I ready download All the software, but my phone cannot install GMXT 5.0.20 ( Certificate Expired ) Why? please help me>>>>>>>>>>

Hi to all forumers, I ready download All the software, but my phone cannot install GMXT 5.0.20 ( Certificate Expired ) Why? please help me>>>>>>>>>>

try setting an earlier date, like 2008 or something

Hi to all forumers, I ready download All the software, but my phone cannot install GMXT 5.0.20 ( Certificate Expired ) Why? please help me>>>>>>>>>>


do u have sign the gmxt 5.0.20 sis file?

after sign sis the file name will change to garminmobilext.signed.

and follow the step carefully..

i try it all can work. ALL can works

@wajaviva

please hard reset the phone once. enter *#7370# in the numeric pad. If you don't believe just google around and you will see. then u will be able to install garmin. garmin does not need ANY signing. only the virtual key needs to sign.

Hye. Hold on !!!!

I can't able to see a folder here : Card:\private\e7d61da9

There is no such folder available what to do to copy the custommap ????????

Now i got it. it's now working! thanks a bunch! install it on mmc

I tested it a lot this last 2 days and it worked ok except for 2 times when it just freezed.

offtopic :is there any posibility to make garmin show u the /cityvilage u are in instead for the city/vilage where u are going to make the next turn?

Or make it show speed limits. I'm not reffering to speed cams, show speedlimit like sygic or mio

On your Windows, go to My Computer (or any folder). In the folder options uncheck the "Hide extensions for known file types". After it you should see SW.UNL.TXT in the folder where it is. Now, you can delete ".txt" by rename...
If you don't use windows, tell me.

i did delete .txt nd copied the files to garmin folder but still unable to use internal gps....whenever i start program it starts searching bluetooth device..
what shud i do?

i did delete .txt nd copied the files to garmin folder but still unable to use internal gps....whenever i start program it starts searching bluetooth device..
what shud i do?

It does start seaching but u go to GPS settings and select integrated gps

i went to settings on the main garmin page..then selected remote gps option...but there is no such option 2 select internal gps...
nd garmin hangs quite often though..

i went to settings on the main garmin page..then selected remote gps option...but there is no such option 2 select internal gps...
nd garmin hangs quite often though..

if there's no internal gps option then your license is probably invalid. did you generate it and copied to the .unl file?

i did generate the license..
nd copied to sw.unl nd gmapsupp.unl in garmin folder respectively..
but the thing is i've downloaded india map only from net
nd keygen doesn't ve india in the list of keygen..
so wot i've done is i chose australia 2008 from the list of
keygen nd generated a key which i put it in gmapsupp.unl..
but nothing seems to work.

i install virtual key but i load custom 2 and nothing happend on garmin xt can anyone help me plzz thx!!!!

Do everythink as it sais in the tutorial, EVERY STEP.
And then plese pres the GREEN button when garmin starts.

Do everythink as it sais in the tutorial, EVERY STEP.
And then plese pres the GREEN button when garmin starts.

i do all ok but the problem is i cant scroll down in garmin and the custom mode 2
in virtual key have no data i try it again one more time :S
and the folder in e/private/e7d61da9 i cant find it must create a folder with this name 'e7d61da9'???

i have nokia 5800

i do all ok but the problem is i cant scroll down in garmin and the custom mode 2
in virtual key have no data i try it again one more time :S
and the folder in e/private/e7d61da9 i cant find it must create a folder with this name 'e7d61da9'???

i have nokia 5800
Ok maybe the problem is that u didn't install virtual key on card. Install it again on e start the program and then close it and it will create the folder. U cannot scrool down in garmin because the key config is not good.

Ok maybe the problem is that u didn't install virtual key on card. Install it again on e start the program and then close it and it will create the folder. U cannot scrool down in garmin because the key config is not good.


i make it milion thx joker18

but one think in tutorials she say install virtual key in phone memory not memory card that why i do it wrong btw thx again!!!

I have made a key mapping that includes UP key. The up key is the menu key.
The inconvinience is that if u want to acces other features you will need to close GarminXT because u cannot switch application with the menu key while in garmin. But maybe some of you will like it. Is is easier to make tour settings with this. The rest is the same.
You have to include Garminxt in virtual key.

hi, i get the error message as certificate error. i tried to change my phone date but i still get the same error. and then i tried to reset my phone using *#7370#, it doesnt work too...
what can i do to use install the virtualkey?

thank you/

It is unsigned. you need to sign it.

[Only registered and activated users can see links]

Upload file give IMEI and, e-mail select all options and it will be signed in a couple of minutes

I have made a key mapping that includes UP key. The up key is the menu key.
The inconvinience is that if u want to acces other features you will need to close GarminXT because u cannot switch application with the menu key while in garmin. But maybe some of you will like it. Is is easier to make tour settings with this. The rest is the same.
You have to include Garminxt in virtual key.

Has anyone thought that maybe volume buttons (+/-) would be great when moving in menus. Is it possible to do with Virtual Key?

Has anyone thought that maybe volume buttons (+/-) would be great when moving in menus. Is it possible to do with Virtual Key?

Already thought of that(and I'm sure many other ) but I didn't succeed mapping the volume keys. Maybe if they update virtual key to support volume keys.

I have made a key mapping that includes UP key. The up key is the menu key.
The inconvinience is that if u want to acces other features you will need to close GarminXT because u cannot switch application with the menu key while in garmin. But maybe some of you will like it. Is is easier to make tour settings with this. The rest is the same.
You have to include Garminxt in virtual key.

you are great joker18 i put custom3 now ty.ty.ty:egdance::egdance::egdance:

The volume keys don't work for the keymaps. They have zero reaction.

[Only registered and activated users can see links]

But the better choice is the menu key=down config. It works better.

The volume keys don't work for the keymaps. They have zero reaction.

[Only registered and activated users can see links]

But the better choice is the menu key=down config. It works better.

I tried to map keys using a nokia 6110 and e51 and 4 keys is the best I could do. And I think at the moment there is no better solution. Just wayt and see what happends.

I've completed all the steps except of the one that is the most basic...installing garmin. I've installed garmin 5.20,doesnt run in my 5800. Is there any problem with the certain version or the installation isnt so simple...? Is there any guide for installing garmin in a 5800 ? I read the guide for the garmin i dont know if its switable for 5800. Help please !

It is unsigned. you need to sign it.

[Only registered and activated users can see links]

Upload file give IMEI and, e-mail select all options and it will be signed in a couple of minutes

what it means by unsigned and sign? is it means that registered or not registered?

thank you.:thanks:

Application need a certificate to be installed. The ones without certificates are unsigned. This one we are talking about needs one and u can get it online at the link I posted. U just upload the file and u get it back signed. Simple as that.

The volume keys don't work for the keymaps. They have zero reaction.

[Only registered and activated users can see links]

But the better choice is the menu key=down config. It works better.

try updated version
[Only registered and activated users can see links]

try updated version
[Only registered and activated users can see links]

Don't say updated version ppl will think it is an updated version of virtual key and it isn't. We already have 4 keys config posted here.

How do you enter house number in address search?

How do you enter house number in address search?

you can't :( you can however navigate to an intersection, which is a small help

Application need a certificate to be installed. The ones without certificates are unsigned. This one we are talking about needs one and u can get it online at the link I posted. U just upload the file and u get it back signed. Simple as that.

if i dont want to sign the application. can i get a hacked vers of 5800 and install the application. will it be done?:urtheman::thanks:

if i dont want to sign the application. can i get a hacked vers of 5800 and install the application. will it be done?:urtheman::thanks:

I didn't hack my phone yet but I read there that u need a valid certificate. I presume you don't have one, if you can obtain one hacking will work

try updated version
[Only registered and activated users can see links]

Hi guys tried out this config on my 5800... at first the vol button does not seem to working but later realised, I you want to more scroll down, Hold vol+ and press vol- . try it and comment :)

link to config file used : [Only registered and activated users can see links]-458

Hi guys tried out this config on my 5800... at first the vol button does not seem to working but later realised, I you want to more scroll down, Hold vol+ and press vol- . try it and comment :)

link to config file used : [Only registered and activated users can see links]-458


Yes it really works When holding down the other button. But it would be really hard to navigate trough the menu while driving:))). But i think this can be corrected

THX for the info!

Hi.

I have installed virtualKey into memory card but in the memory card he didnt create the private folder. help me please

Hi.

I have installed virtualKey into memory card but in the memory card he didnt create the private folder. help me please

Uninstall and re-install the app. If successfully installed, you should find an "E:\private\e7d61da9" folder, within you should place the .keymap configuration file of your preference.

Hi to all senior,

I can't install virtual key. ( Certificate error, contact the app. suplier) please help me.

Mine .sis file is(Virtualkey.v1.00.s60v3.symbianos9.1............ ....)

hi there.. i have been use the online sign in the symbiansigned. The files is success sign by them and download but when i try to installed it keep show me expiry certificate may i know what is the problems? or any setting. i have been set the date correctly or even change back.... any one can tell me?
pls help....

I had the same problem before doing a hard reset with the code *#7370#. BE carefull you will loose data from the phone memory. Do a bakcup before resetting. The code should be 12345.

Thank you!!
I'll try it after download..

i manage to install garmin 5.20 and virtual key. and do all the steps mentioned. but i cant run Garmin.when i click on the garmin application, nothing happen. Can someone help me on this?

thank you.

Installed 5.20, work good so far!!! :triodance:

hi ,
since it works on your 5800.can u help me on mine problem? i'm able to install garmin and virtualkey. i can see GMobileXT in the application page.so when i click to run it, it doesnt give any response. Is it correct i run from the application page?

thank you.

I had the same problem before doing a hard reset with the code *#7370#. BE carefull you will loose data from the phone memory. Do a bakcup before resetting. The code should be 12345.

amazing, it works. thanks!!!!:urtheman:

hi ,
can u help me on mine problem? i'm able to install garmin and virtualkey. i can see GMobileXT in the application page.so when i click to run it, it doesnt give any response. Is it correct i run from the application page?

thank you.

I have the same problem, after install garmin and virtualkey. I can see GMobileXT in the application page. When I click to run it, it doesnt give any response. Virtualkey works fine. Any ideas ?

i had the same problem too where garmin will not start when selected in the application page. i uninstalled the old version then installed v5 of garmin. only then i can get garmin to work.

did anyone upgrade his/her phone 5800xpress in v.20.00. and try installin garmin on?
is there any possibility of garmin working without needing the virtualKey app to be installed?

did anyone upgrade his/her phone 5800xpress in v.20.00. and try installin garmin on?
is there any possibility of garmin working without needing the virtualKey app to be installed?

i have already updated mine to v20.0 but still need to use virtual key for garmin to work.

i have already updated mine to v20.0 but still need to use virtual key for garmin to work.

you do get geotagging capability. although i haven't tested it yet.

yup..you still need the virtualkey....at first I got problem to reinstall VirtualKey after upgrading the firmware...finally I found the way which was resetting the phone,set to Hong Kong, current date/time, offline..now it works as normal with V20.xxxxxx. Thanks God..and now I also can sign app my own..

just one query - with virtualkey loaded onto red and green keys, what happens if the phone rings??

yup..you still need the virtualkey....at first I got problem to reinstall VirtualKey after upgrading the firmware...finally I found the way which was resetting the phone,set to Hong Kong, current date/time, offline..now it works as normal with V20.xxxxxx. Thanks God..and now I also can sign app my own..

Bro sham5576,
what u mean offline....?

To all Bro,
Yesterday, i try to install virtualkey with signed but can't . If i reset my phone(*#7370#) and restore again the backup file, is it become original again ( i mean back to the future) . sory my english not well. help:thanks:

Offline mode not General/Silent/++ mode..ok

Offline mode not General/Silent/++ mode..ok. I got it from the net also.. ha ha ha.

thanks very very

just one query - with virtualkey loaded onto red and green keys, what happens if the phone rings??

if the phone rings you can answer with the options--> answer call.

just one query - with virtualkey loaded onto red and green keys, what happens if the phone rings??

Tested.. you can answer call as usual. Incoming call screen will overlap the garmin / virtualkey screen.

Ok cheers.
On another note, is it possible to stop TSRAutostart from running, perhaps by deleting the file? Or does garmin need it to work? At the moment i'm having to kill it each time with taskman after i close garmin.

followed all the steps but after minimizing (run in background) virtualkey, opening gmxt resulting nothing.. meaning it'll open & close without even showing the garmin black screen.. anyone solved this problem? i'm using 5800 xm btw..

Ok cheers.
On another note, is it possible to stop TSRAutostart from running, perhaps by deleting the file? Or does garmin need it to work? At the moment i'm having to kill it each time with taskman after i close garmin.

Rename it to" TSRAutostart.dlll " or .dlo...

ok will try it. Also, ive noticed if i go to browse map, and start dragging the map around a bit, sometimes after a min or two the program hangs, often the whole phone subsequently too. Any idea why this could be?

Rename it to" TSRAutostart.dlll " or .dlo...

Tried renaming the file, garmin won't run at all when you do that.

The prog is hanging quite a bit now, often in the middle of navigation, really annoying.

I think there is a lot of information and guides to help users to use garmin on the new nokia 5800. It needs a lot of reading but all the information is more or less there.
I have a small question though about renaming a couple of files in order to save battery life; in XPLORE i can't seem to be able to rename them, it just doesn't allow me. I tried to use TASKMAN to see how i can close any garmin process but didnt find any open.

Is there a tool I need to have to be able to close the process then rename those files? or maybe i am missing something?

thanks a lot

Karim

you can rename cardrunner.dll to cardrunner.old, but if you try and rename TSRautostart then garmin will not work. The only way i can find round it is to close tsrautostart after ive closed garmin, with taskman (view>advanced>processes).
Does anyone else's garmin keep crashing on the 5800?

you can rename cardrunner.dll to cardrunner.old, but if you try and rename TSRautostart then garmin will not work. The only way i can find round it is to close tsrautostart after ive closed garmin, with taskman (view>advanced>processes).
Does anyone else's garmin keep crashing on the 5800?

that's what i am struggling with: i have TASKMAN 2.02 (EPOCWARE) and i can't see VIEW anywhere ?? i ONLY HAve a task list of programs then OPTIONS

within OPTIONS i see SETTING, CLOSE , KILL etc,,,,
but nothing listing the opened processes


anyone can help pls?

thanks

that's what i am struggling with: i have TASKMAN 2.02 (EPOCWARE) and i can't see VIEW anywhere ??

Ah, i am using BEST TASKMAN (Smartphoneware), try that. Search for it on this site.

that's what i am struggling with: i have TASKMAN 2.02 (EPOCWARE) and i can't see VIEW anywhere ?? i ONLY HAve a task list of programs then OPTIONS

within OPTIONS i see SETTING, CLOSE , KILL etc,,,,
but nothing listing the opened processes


anyone can help pls?

thanks



just an update : i think you were refering to BEST TASKMAN which i also have
I managed to close the process but when i go to XPLORE, i dont find the DLL within E:/GARMIN????
so I cant rename it

Also, i went to E:RESOURCES/PLUGIN and couldnt rename the RSC file, same issue! i don't know what i need to do to be able to rename them


thanks

Yes i was, as i said in the post above yours. :)

Yes i was, as i said in the post above yours. :)

thanks but didnt see the reply as I was already replying to you.

anyway, any idea why i cant rename the second file? and the dll file isnt showing now in GARMIN directory so i can never rename it then?

What are the names of the files you are trying to rename?

What are the names of the files you are trying to rename?

Following the thread here, i believe there are 2:

one in E:\RESOURCE\PLUGINS\CARDRUNNER.RSC

the other in: E:\GARMIN\CARDRUNNER.DLL (which disappears when u close TSRautostart)


any idea?

you dont need to rename the cardrunner.rsc, only the dll.
But you are better off using usb connection to your pc, and doing it on there. As the pc has full control over all your files.

you dont need to rename the cardrunner.rsc, only the dll.
But you are better off using usb connection to your pc, and doing it on there. As the pc has full control over all your files.

I will try that tonight and i keep you updated (i am at work)

thanks a lot

I will try that tonight and i keep you updated (i am at work)

thanks a lot

using the PC to show the phone as a mass storage worked, thanks a lot

only the first one matters for it kills tsrautostart (use a taskmanager to verify it is gone afterwards) or sth similar (dunno the exact name anymore)which autostarts with the phone and drains accu-power.

renaming those files wouldnt kill or stop TSRAutostart.exe


anyone can comment on this or has managed to stop this process from starting everytime the phone is switched on?


thanks

By the way guys,,, I just discovered a bug with this version on the nokia 5800:

when you select WHERE TO from the main menu, then select an address or search for an address, you be presented with GO / MAPS choices. If you choose GO then it will prompt for downloading traffic info (doesnt matter if you accept or not) then it will calculate the route (takes few seconds).
After this you hear a voice detailing the route to take. If you select any step of this route then you turn the phone horizontally, the garmin application closes itself. I dont think this is normal?


probably a bug i should say

I think thats normal, all the mapping programs ive had crash if u rotate the screen.
Do you get crashes from dragging the map around for a few minutes (in browse map) ? That's what happens to mine, also it does it while navigating sometimes too, it just freezes.

Guys,
I think we should accept those bugs or what ever it is.. because this Garmin version is not for Nokia 5800... it just can be used with extra feature such as virtual key but not perfect..anyway it is still ok with me because something is better than nothing. Just wait Garmin uprade version for our 5800XM touch without virtual key...

I think you're right. The thing we have to remember is, the 5800 is the very first phone on the s60v5 platform, we are quite lucky to have the few s60v5 applications that are out there so far, those developers have done a fast job to get those out already! It's just a matter of time, the software companies would be letting money go to waste if they didn't release software for these new handsets, so they are bound to be working on it as we speak!!

I think you're right. The thing we have to remember is, the 5800 is the very first phone on the s60v5 platform, we are quite lucky to have the few s60v5 applications that are out there so far, those developers have done a fast job to get those out already! It's just a matter of time, the software companies would be letting money go to waste if they didn't release software for these new handsets, so they are bound to be working on it as we speak!!

That's fine I am not complaining ; just thought maybe it's different between firmware versions.

However, I am curious if there is a way to disable the screen rotation within an application? (i.e For GARMIN XT the rotation doesn't work but for all other software, then it does) I don't think so but i thought i might ask this question here

thanks

I had to reformat the card now i can't install gmxt, it's there but it doesn't start, doesn't copy pvt and sys folder, their unavailable unless i change to mass storage but in y-browser the files aren't visible. Is there some way of changing the attributes of these folders? I tried eveything, setting explorer to view hidden and system files, using a altap salamander and other file browsers to change the attributes put none of them work. Have i borked my card? I don't know anyone i can borrow a card from or else id test it.

[edit] It's fixed now, I had to hack with helloOX 1.3 and it's working. Still can't acess those two dirs via pc suite though.

:ilove::ilove:how to download garmin free for nokia 5800

Garmin Mobile XT for Symbian S60 3rd Edition, Ver. 5.00.30, as of Feb 13, 2009

For oficial

[Only registered and activated users can see links]


[Only registered and activated users can see links]

or

[Only registered and activated users can see links]

hi bro,
it works. i can now go to my destination with the help of garmin gps.thank you.Karma for u.

You must first insert the Garmin base map with the map it is free, then casting the rest of the map of your choice, which is opening, and then must be to locate the GarminXT, a place where you are, and only then do. more.
But the true answer would be to specify what and how is not working, because at my new works on N5800 is phenomenal

You must first insert the Garmin base map with the map it is free, then casting the rest of the map of your choice, which is opening, and then must be to locate the GarminXT, a place where you are, and only then do. more.
But the true answer would be to specify what and how is not working, because at my new works on N5800 is phenomenal

You must first insert the Garmin base map with the map it is free, then casting the rest of the map of your choice, which is opening, and then must be to locate the GarminXT, a place where you are, and only then do. more.
But the true answer would be to specify what and how is not working, because at my new works on N5800 is phenomenal:blast:

i d/ed this version of garmin from ipmart, GarminMobileXTforSymbianS603rdEdition_50040.

is it ok w the 5800?
cheers~

i d/ed this version of garmin from ipmart, GarminMobileXTforSymbianS603rdEdition_50040.

is it ok w the 5800?
cheers~

From version 5.00.30 Garmin is fully compatible with 5800.

The new version replaces the older 5:40 and 5:30 is kompartibls with Nokia 5800, but tried to is installed. Can be downloaded from the official map Garmin.

[Only registered and activated users can see links]

Version 5.00.30
[Only registered and activated users can see links]

or

[Only registered and activated users can see links]

how do you get this working with the 5800 .. have correct unlock files but on first scree can choose differnt languages with thetouch arrow keys but the next key at bottom is not touch and none of the keys work to go on thanks

Probably not kept, the other languages from the previous settings, Garmin, mint, because a lot of work on Nokia 5800
and there is no problem. See folder in Garmin languages.

Been using this a few weeks now on the Nokia 5800.

PROBLEM. Whilst using the navigation sometimes the program just quits few minutes when trip is planned and ready to go. Is this due to system memory problems.

Have tiried to display less info whilst travelling which seems to work.

Does anyone know why it kicks out?

Exactly the problem i've noticed. It does it sometimes in the middle of a journey, it just freezes, then quits a min or two later. I find the easiest way to hang the program though, is to go to browse map, and drag the map around a few times, it seems it definitely can't handle that.

Mind you, this version isn't meant for the s60v5 platform, so anything could be causing it i suppose.

I have 5.4 installed on my 5800. The best way to keep the memory from lagging is to keep the map details setting to least. That way, there is enough memory on the device while garmin is running. Also make sure no other program is running in the background.

I have one question though for those who have 5.3 installed. Do street names appear on your maps? I used to have 5.1 installed and the street names were displayed. After updating to 5.4, street names no longer showed up in 3D view. I'm planning to downgrade to 5.3 if it still shows street names.

Thanks guys.

I have 5.4 installed on my 5800. The best way to keep the memory from lagging is to keep the map details setting to least. That way, there is enough memory on the device while garmin is running. Also make sure no other program is running in the background.

I have one question though for those who have 5.3 installed. Do street names appear on your maps? I used to have 5.1 installed and the street names were displayed. After updating to 5.4, street names no longer showed up in 3D view. I'm planning to downgrade to 5.3 if it still shows street names.

Thanks guys.

yes street names are shown on the maps; i'm using 5.3 with Nokia 5800.

:nod:

thanks guys. looks like i'll be downgrading to 5.00.30 then. 5.00.40 just doesn't display the street names on the map anymore, both on my n-95 8gb and my 5800. I tried every setting but just won't work. I'm sure it's not the map because i'm using the same .img file and that the street names display when i'm on it on the top portion of the screen.

Oh well, hope garmin does something to correct this.

just wana confirm, do we still need virtual key if we are using 5.40 for nokia5800?

just wana confirm, do we still need virtual key if we are using 5.40 for nokia5800?

No. From 5.00.30, virtual key is no longer needed as it already supports touch. However, in my experience, 5.00.30 is better because it shows the street names on the map while navigating. This is not the case with 5.00.40. I downgraded from 5.00.40 to 5.00.30 because of this.

Anyone using firmware ver21.0.025 on their 5800 with GMXT 5.0.30/40/50?. I notice there is a bug with the new v21 firmware. Whenever you do a search for an address or POI in GMXT and you try to input in a special character (eg, / or \) in the popup symbol keypad, you cannot select that special character and when you click on the 'tick' button it doesn't return you to the GMXT search screen. So basically you are stuck at the special character popup screen. The only way out then is to shutdown or kill the GMXT app. Anyone else face this problem? Any workaround?

Nice....bump for you.

you r right ehoe

i'm having v21.0.025 with garmin xt 5.00.50 and having the same problem of special character...

i want to ask to all sifu and guru... i have 5800 v20 and try to install garmin xt v5.5,base map,support file on my mobile using usb cable..i install it on my memory card..then when i try to install, i get "certificate expired" message..is there i missing to install? hopefully somebody can help me..please..i want to install garmin..

i want to ask to all sifu and guru... i have 5800 v20 and try to install garmin xt v5.5,base map,support file on my mobile using usb cable..i install it on my memory card..then when i try to install, i get "certificate expired" message..is there i missing to install? hopefully somebody can help me..please..i want to install garmin..

You are not the first one...Try to set back the date in your phone until you install Garmin. If this doesn't work, hard reset your phone. If this two doesn't work (and i don't think so) you have to upgrade your software phone if there is one newer via NSU. At least this was the solution for two of my friends having the same problem.

Dear,
is it poosible to install garmin mobile Xt on E75-1 Rm -412, Updated Firmware

It doesn`t work! I tried 500 times, but I can`t press "next" in "Select text language"... 5800 simply can`t have gps...

Anyone using firmware ver21.0.025 on their 5800 with GMXT 5.0.30/40/50?. I notice there is a bug with the new v21 firmware. Whenever you do a search for an address or POI in GMXT and you try to input in a special character (eg, / or \) in the popup symbol keypad, you cannot select that special character and when you click on the 'tick' button it doesn't return you to the GMXT search screen. So basically you are stuck at the special character popup screen. The only way out then is to shutdown or kill the GMXT app. Anyone else face this problem? Any workaround?

Facing the same here, is there any solutions to this bug??

i have problem when i click to virtual key then i cant see it because it says error forbiden can you tell me how to see virtual key??

i have problem when i click to virtual key then i cant see it because it says error forbiden can you tell me how to see virtual key??

Why are you still using virtual keys in the first place. GMXT 5.0.30 and above no longer requires virtual keys, its supports full touchscreen already. So suggest you upgrade your GMXT to the latest version.

ok i manage to install garmin mobile xt ver 5.50 but i cant find the keygen to unlock it can you tell me where can i found it also where can i find the map of europe??? please help!!!

i manage to install the program gatmin 5.00(50)the program works fine but sometimes it freezes and i have to restart the aplication .can you tell me what to do to fix it??

install last version bro
this thread is old and should be closed, now latest versions support 5800 touch screen

i manage to install the program gatmin 5.00(50)the program works fine but sometimes it freezes and i have to restart the aplication .can you tell me what to do to fix it??

Version fully compatible with touch screen device out:
[Only registered and activated users can see links]
:close: