Installation navcore 8.204 rev.1.5 for GO910 (original voices) [Archive]

View Full Version : Installation navcore 8.204 rev.1.5 for GO910 (original voices)

grard31

19th January 2009, 00:42

Installation navcore8.204 for GO910 (with the voices of original and updated rev.1.5)
Sorry for my English :sorry:

Read, and download Jdownloader (in the bottom of the page) :
http://www.ipmart-forum.com/showpost.php?p=2327090&postcount=1
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost.php?p=2481633&postcount=14
(By following the example, you have all folders of TTuser)

- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=466591&d=1232288179
of TTuser
You should have the folders :
ASR.rar
Home_Navcore.8.204.9718_tomtom.com.rar
navcore_SE_8.204.9718_basicpack.rar
SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5.rar
Extract the folders
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=448965&d=1227044472
Extract the folder LoquendoTTS
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=450399&d=1227432495
Extract the folder suspend
- Download the map you want to use :
For map : Western_and_Central_ Europe 825.2157 or other countries
For map : North_America 825.2157
Maps located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337584
For map : Australia 815.2086
Map located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337608
Extract the map
- To activate the map, read and download : Easyusetools for Keygen Mapcheck Metacheck ttsystempatcher
http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58
Extract the folder Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher

Installation :
1-Save the contents of your GO910 in a safe place on your hard drive
2-Clear all the contents of your GO910
3-Install folder ASR (downloaded) to the root of your GO910
4-Open folder : navcore_SE_8.204.9718_basicpack (downloaded)
-Install navcore_SE_8.204.9718_basicpack contents of the folder to the root of your GO910 later :
-delete files system5.5022 and system5.5106
-delete the folder LoquendoTTS
5-Install folder LoquendoTTS (downloaded) to the root of your GO910
-From the saved copy of your TomTom : in the folder LoquendoTTS make a copy folders Dutch, EnglishGb, EnglishUs, French, German, Italian, PortuguesePt, Spanish then paste them inside the folder LoquendoTTS (previously installed) on your GO910. Close the folder LoquendoTTS
For those who do not have these folders download the voices :
http://www.ipmart-forum.com/showthread.php?t=170022
6-Open folder SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5 (downloaded)
-Copy the folder Outsourced.8204, file ttsystem and paste it in the root of your GO910
-Open folder SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5 (downloaded), open folder switchfiles, open folder Config, copy files setconfig.txt, version.txt and paste it in the root of your GO910
-Open file setconfig.txt, keep only changedtext:TomTom GO 940 LIVE (delete all other files), delete 940 LIVE, write for example : 910 with your name, close the file setconfig.txt
7-Open folder suspend (downloaded), copy the file suspend.ogg and paste it in the root of your GO910
8-Add folders and files you want from your backup :
-Folders : art, audiobooks, contacts, ephem, helpme, itn, mp3, photos, raster, sounds, zip ...
-Files : autorun.inf, tomtom.ico, splashw.bmp, suspendw.bmp ...
9-Install the map :
-Install folder of your map (downloaded) to the root of your GO910
-Open folder : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)
Double click on : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher
Double click on : RunMeforAllAutomatic.cmd
Select : 1 or follow the onscreen instructions
10-Disconnect the GO910, let it reboot (select in Windows “Safe disconnect”, disconnect GO910 from the computer (take it from a cradle)) Wait the message : Create ttgo.bak (about 1 minute)
11-Making various settings

Warning : when you connect the GO910 : place it back on the cradle and switch on your GO910. After the first page comes up and after about 10 – 20 seconds it will automatically restart it’ s self and connect to your computer. The “Connect to my computer” screen is now omitted

For TTHome2 : I use the old method (I do not handle my GO910 with TTHome)
With XP :
Open the folder : Home_Navcore.8.204.9718_tomtom.com (downloaded), open folder Navcore.8.204.9718@ tomtom.com
I copy the file : 8-204-9718-1.dll
In C:\Documents and Settings\ ????????\Application Data\TomTom\HOME\Profiles\xxxxxxxx.default\extensi ons\Navcore.7.903.9183@tomtom.com (or other), I paste file 8-204-9718-1 . dll, I note the file name .dll (7-903-9183-1.dll (or other)), I delete the file : 7-903-9183-1.dll (or other), and I rename file 8-204-9718-1.dll : 7-903-9183-1.dll (or other)
With Vista : C:\Users\????????\AppData\Roaming\TomTom\HOME\Prof iles\xxxxxxxx.default\extension\Navcore.7.........
:thanks: :thanks:
Bonne route et merci TTuser :urtheman: :urtheman:
grard31

Zebra92

1st February 2009, 00:20

Hello,
I installed this version on my GO910 and every thing looks good except when I put the GPS on it's support in the car, it does not start automatiquely when the alimentation coming from the car powered the GPS like before.
Is it normal and is there a solution to fixe this little problem?
Thanks in advance.

gobbetto

1st February 2009, 02:29

Normal, no solutions ;)
Thank you grard :)

mcmurdock88

5th February 2009, 18:22

It works, thx man :)
:urtheman:

piotrek1970

20th February 2009, 08:14

Guys I instoled the Navcore 8.204 to my Go910 but the voice is very loud is there any fix for that.

thanks

rozel

6th March 2009, 18:38

Hi

After visiting several forums, I liked this one a lot and followed the above proceedure to the letter. However when I'd finished, I disconnected and all I get is the Green splash screen which you get when you connect your device to the pc together with a flashing white cross in a red circular background in the bottom right hand corner. Nothing I do can get my 910 up and running! When it is connected to my pc, the flashing cross diappears.

What's worse is when connecting to TomTom Home 2, it says there's no backups to be found! I created a backup using TomTom Home 2 before I started out and yes I have saved all the files and folders separately too but WTF!???

Spent ages doing this - I admit I'm a noob but what have I done wrong?

I am trying to update my GO910 exactly as this thread explains from my original 7903 Navcore and 650.1052 map (Western and Central Europe).

Something basic is wrong with the instructions - problems found: -

Some of the folders in my original LoquendoTTS folder were not mentioned - lib being one, I copied all to my TT drive - is this ok ?

My original root did not have a config folder or the 2 files setconfig.txt and version.txt - I now seem to have a config folder with the 2 files in them together with the 2 files in the Root - which should I have and what should they say?

The stuff about the setconfig.txt really doesn't make sense to me - I do not understand - after deleting the lines of text, if that is what was meant, I now have a setconfig.txt file which reads: -

changedtext:TomTom GO 940 LIVE
910 Paul Green

The version.txt file reads: -

A:8204
B:9718

is this correct? These numbers correspond to the Map version.

The respective files in the config folder read: -

setconfig.txt file: -

model:x30
runclean
viewmsg
sdid:1
runcheck
changedtext:TomTom GO 940 LIVE
delgns
delmap
ttsoff
btoff
bton
fmon
fmoff
rm
nomsg
usesetting
cleanflash
noqfixdel

Vesrion.txt file: -

A:7903
B:9183

Which is what they were originally

But which ones if any are correct and where should these files reside in a config folder or in the root?

Using the full Western and Central Europe Map - 825_2157 with Easytools everything seemed to run ok

After inserting j for my drive letter this is what it reads: -

### No tt*.bif found ###
### Run Fake meta.txt Check ###
Western_and_Central_Europe-26.meta v825 bld2157 Key seems to be ok
Enter Devicecode here, without space, - I wrote AKTANA2CQA -the Device details from my 910GO

As I've run it already it now says twice that dct exists already and Press any key to continue

After pressing a key the program aborts and closes - is this correct?

I then disconnected the device but it did not reboot - no message comes up regardingCreate ttgo.bak - it just sticks on the above screen. It doesn't restart after reconnecting to the cradle either - still sticks on the above screen.

I've tried resetting but still the above screen is all I get.

In Tomtom Home 2 It would like to update to an earlier Navcore 6525 ????? It doesn't recognise my backup made before I started out, saying no backup can be found and most of the functions will not work either! including Mapshare. It won't even allow me to use my Go through Tomtom Home.

I'm using Tomtom Home 2 on Vista Ultimate -64 bit OS When it came to do the last bit of the tutorial, which I assume allows me to use Tomtom Home 2 with my updated device, the folder Navcore 6/7****** or whatever simply does not exist.

So I inserted the Navcore.8204.9718@tomtom.com folder in: -

AppData/Roaming/TomTom/HOME/Profiles/bg19ulps.default/extensions

Is this correct?

OK enough of me - I really do not fully understand what I'm doing so tried to follow the instructions precisely - I am hoping that by wiping and transferring back all my files, will restore everything to what it was like before - I will report back about this later.

Edit (update) - Yes thankfully everything is as it was before - Navcore 7.903 (9183/081205) OS:2344 Map W & C E v650.1052

Futher Edit - Just noticed I'm running TomTom Home v 2.5.2.60 -DOH - what do I do about this as well ?

:emptymind:So What do I do next please ???:emptymind:

:wave::wave::wave:PLEASE HELP PLEASE PLEASE:wave::wave::wave:

roz

petercook

6th March 2009, 19:17

which navcore do i use for a 910

is it

navcore_8.204.9718.go540-go740.cab
or
navcore_8.204.9718.go940.cab

BiggerDave

6th March 2009, 19:39

which navcore do i use for a 910

is it

navcore_8.204.9718.go540-go740.cab
or
navcore_8.204.9718.go940.cab

What's it say in the first post?

grard31

7th March 2009, 10:31

I now have a setconfig.txt file which reads: -

changedtext:TomTom GO 940 LIVE
910 Paul Green

roz
-Open file setconfig.txt, keep only changedtext:TomTom GO 940 LIVE (delete all other files), delete 940 LIVE, write for example : 910 with your name, close the file setconfig.txt
no :
changedtext:TomTom GO 910 Paul Green

The version.txt file reads: -

A:8204
B:9718

is this correct? These numbers correspond to the Map version.

roz
no...
version.txt file :
A:7903
B:9183

-Copy the folder Outsourced.8204, file ttsystem and paste it in the root of your GO910
You have installed the file ttsystem ?:confused:

Observe the proceedings and not to innovate

grard31

petercook

7th March 2009, 12:36

What's it say in the first post?

it doesnt mention which one afaik

grard31

7th March 2009, 13:23

which navcore do i use for a 910

is it

navcore_8.204.9718.go540-go740.cab
or
navcore_8.204.9718.go940.cab

Neither one nor the other

Read here :
http://www.ipmart-forum.com/showpost.php?p=2481690&postcount=1

grard31

petercook

7th March 2009, 13:39

Neither one nor the other

Read here :
http://www.ipmart-forum.com/showpost.php?p=2481690&postcount=1

grard31

it says

You should have the folders :
ASR.rar
Home_Navcore.8.204.9718_tomtom.com.rar
navcore_SE_8.204.9718_basicpack.rar
SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5.rar

but the download link it refers links to all.dlc.zip which has none of those files?

grard31

7th March 2009, 13:59

it says

You should have the folders :
ASR.rar
Home_Navcore.8.204.9718_tomtom.com.rar
navcore_SE_8.204.9718_basicpack.rar
SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5.rar

but the download link it refers links to all.dlc.zip which has none of those files?

Read, and download Jdownloader (in the bottom of the page) :
http://www.ipmart-forum.com/showpost...90&postcount=1
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost...3&postcount=14
(By following the example, you have all folders of TTuser)

grard31

petercook

7th March 2009, 14:10

im an idiot..sorry didnt realise it was a RS downloader

rozel

7th March 2009, 14:56

-Open file setconfig.txt, keep only changedtext:TomTom GO 940 LIVE (delete all other files), delete 940 LIVE, write for example : 910 with your name, close the file setconfig.txt
no :
changedtext:TomTom GO 910 Paul Green

no...
version.txt file :
A:7903
B:9183

-Copy the folder Outsourced.8204, file ttsystem and paste it in the root of your GO910
You have installed the file ttsystem ?:confused:

Observe the proceedings and not to innovate

grard31

Hi Thank you for your further help - YES SUCESS !!! :urtheman:

Having just played with it for a few minutes though, I do not seem able to find Post Codes here in the UK - this is extremely important - when I input a postcode all I get are Italian ones - any ideas here anyone please ??? :wave::wave::wave:

Ahhh - I see that you now have to set the country for this map - why is this? I now have my post codes available, having selected United Kingdon, but can you plan a route from one country (say the UK) to another (say Germany) without switching maps? Will the device select the appropriate maps automatically ? How can I get my previous Favourites back ? How can I get my Speed Camera stuff back imported separately etc etc

Sorry for such noob questions but this is all new to me -

TAIA

roz

bobby1607

7th March 2009, 15:11

Use "Support" from the TomTom site,
and search for "postcodes". It will show a reference to not working postcode searches.
:goodluck:

petercook

7th March 2009, 17:02

sorted im up and cooking. just need to get speed cameras setup

grard31

7th March 2009, 17:27

Ahhh - I see that you now have to set the country for this map - why is this? I now have my post codes available, having selected United Kingdon, but can you plan a route from one country (say the UK) to another (say Germany) without switching maps? Will the device select the appropriate maps automatically ? How can I get my previous Favourites back ? How can I get my Speed Camera stuff back imported separately etc etc

roz
For the folders art, helpme, zip download : (thank tuurtje)
http://www.anonym.to/?http://rapidshare.com/files/204644237/navcore_8.204.9718_NEW.rar
Copy the folders art, helpme, zip and paste them in the root of your GO910

For speedcams read here : (thank the maverick)
http://www.ipmart-forum.com/showpost.php?p=1910918&postcount=1

grard31

rozel

8th March 2009, 17:15

For the folders art, helpme, zip download : (thank tuurtje)
http://www.anonym.to/?http://rapidshare.com/files/204644237/navcore_8.204.9718_NEW.rar
Copy the folders art, helpme, zip and paste them in the root of your GO910

For speedcams read here : (thank the maverick)
http://www.ipmart-forum.com/showpost.php?p=1910918&postcount=1

grard31

grard31 - May I publicy thank you for all your hard work and effort in helping a Newbie update his 910 for the very first time since purchase, 2 years ago :urtheman::urtheman::urtheman:

All seems well - but have a few residual questions if you don't mind answering for me please? :confused:

1. What is "Boot" - my version is 4.8600 and I notice others have more up to date versions - what does it mean and what does it do? Is it worth my while to update and if so, how do I do this please?

2. Favourites - have I lost them? I've read that you cannot move them from a version 7 Navcore to a version 8 one so I don't think that moving from a version 6, in my case, to version 8 will be successful either? Is there anything I can do - other than going back to my old setup, manually writing them down and starting over in my new setup?

3. Advanced Lane Guidance - am I right in thinking that this only works on Motorways and how do I know it's installed and working?

4. In my version 6, there were settings for the compass - I can't find them in version 8 - any thoughts?

5. When I keep the power button pressed, the unit seems to switch off - does this mean that it's powered down correctly or is it still on draining the battery - it's just that I've read a lot about the newer Navcores not powering down properly.

6. What would happen if I linked my Device to my Account in TomTom Home? Will my Go be affected in anyway and is it advisable to link it?

7. The art folder - this relates to changing the pointer from a blue arrow to a car, yes? When I change it in preferences, when I go back to the main map screen, the blue arrow remains - is something wrong or does it change to the car I previously selected when I attach it to the car's docking station? - it's just that I haven't tried it thoroughly yet, forgive me.

Thanks again for all your help and support and hope you, or someone can answer my final questions

Regards

roz

grard31

8th March 2009, 19:28

rozel

8th March 2009, 20:41

rozel,

1- The GO910 works perfectly (with all version of navcore_SE ... of TTuser) without changing their bootloader.(my boot : 4.8600)
In addition failure (back TomTom guarantee) or resale (product : not compliant) you can have problems.
2- You can use PoiEdit : http://www.poiedit.com/ , or manually writing (the best)
3- Make a demo cours
4- The compass is set : Preferences 4 of 8 : Status bar preferences, Show compass => select
5- No problem with GO910
6- Before starting TTHome check ttgo.bif : (open file ttgo.bif with notepad) ApplicationVersionVersionNumber=7903
If yes : OK
If no : delete file ttgo.bif, copy file ttgo.bak and paste it in the root of your GO910
Rename this file ttgo.bif
7- For change car symbol : Preferences 3 of 8 : => select

grard31

Thanks agian for that but still have a few issues, probably because of language difficulties

2. Could you explain some more please
3. Not sure what you mean - I just want to know how I can tell if I have ALG or not
4. Yes I know but in version 6, there were more options - presumably not in 8 ?
7. Yes I know but should it work immediately or only when it is docked and car is moving ?

Thanks again and hope to hear some more

roz

mukemu

26th April 2009, 21:16

grard31

26th April 2009, 22:16

:thanks: :urtheman: :yourock:

Everything works fine, but there is no sound. Please help
mukemu,

1 - Before starting TTHome check ttgo.bif : (open file ttgo.bif with notepad) ApplicationVersionVersionNumber=7903
If yes : OK
If no : delete file ttgo.bif, copy file ttgo.bak and paste it in the root of your GO910
Rename this file ttgo.bif
2 -Install folder LoquendoTTS (downloaded) to the root of your GO910
-From the saved copy of your TomTom : in the folder LoquendoTTS make a copy folders Dutch, EnglishGb, EnglishUs, French, German, Italian, PortuguesePt, Spanish then paste them inside the folder LoquendoTTS (previously installed) on your GO910. Close the folder LoquendoTTS
3 -Disconnect the GO910, let it reboot (select in Windows “Safe disconnect”, disconnect GO910 from the computer (take it from a cradle))

grard31

mukemu

26th April 2009, 22:58

mukemu,

1 - Before starting TTHome check ttgo.bif : (open file ttgo.bif with notepad) ApplicationVersionVersionNumber=7903
If yes : OK
If no : delete file ttgo.bif, copy file ttgo.bak and paste it in the root of your GO910
Rename this file ttgo.bif
2 -Install folder LoquendoTTS (downloaded) to the root of your GO910
-From the saved copy of your TomTom : in the folder LoquendoTTS make a copy folders Dutch, EnglishGb, EnglishUs, French, German, Italian, PortuguesePt, Spanish then paste them inside the folder LoquendoTTS (previously installed) on your GO910. Close the folder LoquendoTTS
3 -Disconnect the GO910, let it reboot (select in Windows “Safe disconnect”, disconnect GO910 from the computer (take it from a cradle))

grard31

Operator error. One more problem maybe. When TTHome2 opens, there are no icons/pictures just words (Example: Add Maps no picture for this option) and when I try to operate my GO from TTHome2, it shuts down. Using TTHome 2.6

harleyx

27th April 2009, 03:26

Installation navcore8.204 for GO910 (with the voices of original and updated rev.1.5)
Sorry for my English :sorry:

Read, and download Jdownloader (in the bottom of the page) :
http://www.ipmart-forum.com/showpost.php?p=2327090&postcount=1
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost.php?p=2481633&postcount=14
(By following the example, you have all folders of TTuser)

- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=466591&d=1232288179
of TTuser

You should have the folders :
ASR.rar
Home_Navcore.8.204.9718_tomtom.com.rar
navcore_SE_8.204.9718_basicpack.rar
SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5.rar
Extract the folders
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=448965&d=1227044472
Extract the folder LoquendoTTS
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=450399&d=1227432495
Extract the folder suspend
- Download the map you want to use :
For map : Western_and_Central_ Europe 825.2157 or other countries
For map : North_America 825.2157
Maps located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337584
For map : Australia 815.2086
Map located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337608
Extract the map
- To activate the map, read and download : Easyusetools for Keygen Mapcheck Metacheck ttsystempatcher
http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58
Extract the folder Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher

Installation :
1-Save the contents of your GO910 in a safe place on your hard drive
2-Clear all the contents of your GO910
3-Install folder ASR (downloaded) to the root of your GO910
4-Open folder : navcore_SE_8.204.9718_basicpack (downloaded)
-Install navcore_SE_8.204.9718_basicpack contents of the folder to the root of your GO910 later :
-delete files system5.5022 and system5.5106
-delete the folder LoquendoTTS
5-Install folder LoquendoTTS (downloaded) to the root of your GO910
-From the saved copy of your TomTom : in the folder LoquendoTTS make a copy folders Dutch, EnglishGb, EnglishUs, French, German, Italian, PortuguesePt, Spanish then paste them inside the folder LoquendoTTS (previously installed) on your GO910. Close the folder LoquendoTTS
For those who do not have these folders download the voices :
http://www.ipmart-forum.com/showthread.php?t=170022
6-Open folder SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5 (downloaded)
-Copy the folder Outsourced.8204, file ttsystem and paste it in the root of your GO910
-Open folder SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5 (downloaded), open folder switchfiles, open folder Config, copy files setconfig.txt, version.txt and paste it in the root of your GO910
-Open file setconfig.txt, keep only changedtext:TomTom GO 940 LIVE (delete all other files), delete 940 LIVE, write for example : 910 with your name, close the file setconfig.txt
7-Open folder suspend (downloaded), copy the file suspend.ogg and paste it in the root of your GO910
8-Add folders and files you want from your backup :
-Folders : art, audiobooks, contacts, ephem, helpme, itn, mp3, photos, raster, sounds, zip ...
-Files : autorun.inf, tomtom.ico, splashw.bmp, suspendw.bmp ...
9-Install the map :
-Install folder of your map (downloaded) to the root of your GO910
-Open folder : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)
Double click on : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher
Double click on : RunMeforAllAutomatic.cmd
Select : 1 or follow the onscreen instructions
10-Disconnect the GO910, let it reboot (select in Windows “Safe disconnect”, disconnect GO910 from the computer (take it from a cradle)) Wait the message : Create ttgo.bak (about 1 minute)
11-Making various settings

Warning : when you connect the GO910 : place it back on the cradle and switch on your GO910. After the first page comes up and after about 10 – 20 seconds it will automatically restart it’ s self and connect to your computer. The “Connect to my computer” screen is now omitted

For TTHome2 : I use the old method (I do not handle my GO910 with TTHome)
With XP :
Open the folder : Home_Navcore.8.204.9718_tomtom.com (downloaded), open folder Navcore.8.204.9718@ tomtom.com
I copy the file : 8-204-9718-1.dll
In C:\Documents and Settings\ ????????\Application Data\TomTom\HOME\Profiles\xxxxxxxx.default\extensi ons\Navcore.7.903.9183@tomtom.com (or other), I paste file 8-204-9718-1 . dll, I note the file name .dll (7-903-9183-1.dll (or other)), I delete the file : 7-903-9183-1.dll (or other), and I rename file 8-204-9718-1.dll : 7-903-9183-1.dll (or other)
With Vista : C:\Users\????????\AppData\Roaming\TomTom\HOME\Prof iles\xxxxxxxx.default\extension\Navcore.7.........
:thanks: :thanks:
Bonne route et merci TTuser :urtheman: :urtheman:
grard31

Not sure what I did wrong, but I cannot find the file " Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)"

OOPS! I found it.

Problem now I have the map loaded, ran the keygen, and the unit says "no maps found"

grard31

27th April 2009, 10:57

Operator error. One more problem maybe. When TTHome2 opens, there are no icons/pictures just words (Example: Add Maps no picture for this option) and when I try to operate my GO from TTHome2, it shuts down. Using TTHome 2.6
mukemu,

I never use: operate my GO ... (I do not handle my GO910 with TTHome)
I use TTHome only for : update the maps and QuickGPSfix

grard31

grard31

27th April 2009, 11:37

Not sure what I did wrong, but I cannot find the file " Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)"

OOPS! I found it.

Problem now I have the map loaded, ran the keygen, and the unit says "no maps found"
harleyx,

- After using : RunMeforAllAutomatic.cmd => Select : 1 then 1 and follow the onscreen instructions
In the folder of the map, you have the file .dct ? (example for Western_and_Central_Europe-26.meta.dct)
- Never use the file MapSettings.cfg of another map (If so, delete the file MapSettings.cfg)

grard31

harleyx

27th April 2009, 16:17

harleyx,

- After using : RunMeforAllAutomatic.cmd => Select : 1 then 1 and follow the onscreen instructions
In the folder of the map, you have the file .dct ? (example for Western_and_Central_Europe-26.meta.dct)
- Never use the file MapSettings.cfg of another map (If so, delete the file MapSettings.cfg)

grard31

I don't have .cfg, my map (USA, Canada is meta.dct

grard31

27th April 2009, 17:26

I don't have .cfg, my map (USA, Canada is meta.dct
harleyx,

You have the file ttsystem in the root ? (the screen with a flashing red X)
6-Open folder SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5 (downloaded)
-Copy the folder Outsourced.8204, file ttsystem and paste it in the root of your GO910
-Open folder SE_ttsystem.8204.9718.x10.x20.x30.rev.1.5 (downloaded), open folder switchfiles, open folder Config, copy files setconfig.txt, version.txt and paste it in the root of your GO910
-Open file setconfig.txt, keep only changedtext:TomTom GO 940 LIVE (delete all other files), delete 940 LIVE, write for example : 910 with your name, close the file setconfig.txt
You use : USA_and_Canada_825_2159 ?
This is not the right choice. This map has not TTS ASR ALG ...
Read here :http://www.ipmart-forum.com/showpost.php?p=2548810&postcount=1

grard31

harleyx

27th April 2009, 18:31

I may have to change my map, the one to download was a failed link.
I may also be confused by the 'root'. I deleted everything in the TT...Basicaly went into the drive in the computer and deleted everything. Then copied all the files (as per instructions) to the vacant drive. ('I' in my case.)

grard31

27th April 2009, 19:08

harleyx

28th April 2009, 02:53

And is the 'root' the drive represented on my comp?

harleyx

28th April 2009, 02:56

harleyx,

Example for North_America_825.2157 :
http://www.ipmart-forum.com/showpost.php?p=2559176&postcount=27

grard31

Grard, I installed the map on this link, now keygen says "no maps found"

grard31

28th April 2009, 12:35

And is the 'root' the drive represented on my comp?
harleyx,

'in the root of your GO910'
the 'root' is the hard drive of your GO910...
Example for Navcore SE 8.412 => Point 1 : Content of the hard drive (root) of my GO910 connected to driveletter K of my computer
http://www.ipmart-forum.com/attachment.php?attachmentid=490502&d=1240324404

grard31