Known Errors (Experiences valid for my 710):
old Remote still dead (this mean the "NOT BT" Remote);
no "poweroff" more possible (the angry Watchdog barks always and the Device wake up again);
Pc-Connection freeze it;(only x10)
x40 Emu. 0% Brightness is total dark
Original for Device: x40


TT Site says:
Version 8.310
(TomTom GO x40 series only)

* Support for all iPods (requires Active Dock with iPod or Active Dock for fixed installation)
* Support for Active Dock with RDS-TMC
* Improvements of Google Search and Traffic handling
* Fuel Prices are received automatically
* GPRS signal loss is being indicated
* Other minor improvements


ONES Owner should read here (http://www.ipmart-forum.com/showpost.php?p=2552927&postcount=214)

You need to download:
Have you nothing: Basicpack+ SE_ttsystem.8.310.9760.rar
update you already through Home to 8.310 replace only ttsystem
navcore_8.310.9760.go540-go740.cab (http://download.tomtom.com/sweet/navcore/navcore_8.310.9760.go540-go740.cab)
navcore_8.310.9760.go940.cab (http://download.tomtom.com/sweet/navcore/navcore_8.310.9760.go940.cab)
ASR Folder for Voice Input is equal to 8.201/3/4, 8.300/320
x30 Voices (http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111)

all Features, Function, use similar as already known, read readme for exact Infos

08.03.rev 1.1 new ttsytem, fix for 910

Now only as .dlc ,you can use
http://jdownloader.org/download/index

:thanks::urtheman:

Thanks TTuser i like this one
all working on the 920
but i did'nt try the bootloader version i'll will wait for a test of it.
works fine whit the older bootloader version.
the dim light works on the 920 too

working good on 720

thank You

Thank you
Working on 930 Like Charme
Big thanks

Note:
news in this NAvcore is You can run your Service at Operate my Go
I can Run my HD traffic there And also Speed cam and Weather and buddys and also download quickGPS
Everything seems to work inside Operate MY GO

Thank you :urtheman:

Working great on 720... Thanks again TTuser

Thank-you TTuser. This works perfectly with my 740.

Thanks,
works great so far and no message "please download software to use rds traffic...." any more for my go 910.

Is the HD Traffic Receiver supported by this version for a GO x20/x30?

Hi,
works perfectly with my 520, but dont work on older device (one - rider).

Samson

Is there any problems with the new bootloader with older devices?

What is the purpose of the ttsystem_8.310.9760_mappatch.zip file?

please rapidshare file of it
can't download with jdownloader its blocked on this pc

Then try cryptload

Megaupload all files:
http://www.megaupload.com/?d=UCB7DIQ1

ASR:
http://www.megaupload.com/?d=X87CZ6I5

password: Javiermb.com


Thanks to AMR63 (spanish forum member)

Thx

works fine now on 920

cryptload works okay
thanks :egdance:

Tried it on TTOne V2.
NavCore boots..... but crashes while loading the map.
(gonna experiment with it, but doubt it'll work)

Tried it with and without the mappatch. (Don't know what this ttsystem is)
My cracked map was accepted with both versions, but still froze in both cases

ps. not tried the new system file yet.... think i'll dare to take the riscs later


pps.; now tried it..... the new system file works without problem on my TTOne v2. Didn't notice any difference btw. The POI warning problem (for TT One's) still excists. I hoped that would have been solved.

working good on 720

thank You

What about stuttering computer voice?

No stuttering voices on 720 (not for me anyway)

I i have upgrade throught tomtom home and replace the ttsystem file but when its turn on its say u can't use this map on this device any idea ? i have tomtom go520.

Does it works fine one TomTom Go910 ?

i use ttsystem file from this member ( 8kookoo) and its solve my prob and now i can see maps thanx for upload

Re: x40 Navcore 8.310.9760 SE Variant

--------------------------------------------------------------------------------

Megaupload all files:
http://www.megaupload.com/?d=UCB7DIQ1

ASR:
http://www.megaupload.com/?d=X87CZ6I5

password: Javiermb.com


Thanks to AMR63 (spanish forum member)

--------------------------------------------------------------------------------
Last edited by 8kookoo; Today at 11:20..

and this makes so much no Sense because this Files are exactly the same as from me:hehe:

Thanks,
works great so far and no message "please download software to use rds traffic...." any more for my go 910.
this Messages was no Problem and had not harm at all
what now happens is much more not good
What is the purpose of the ttsystem_8.310.9760_mappatch.zip file?
thats even a original + patch for stolen maps, so difficult:confused:

on 930 it works great

on tt one 1st it crashes when i touch display to get to the main menu any ideas?

TTUser do you have any idea about what's been changed in btserver & rdstmcserver (both in outsourced bin directory) are those changed compared to the 8.204 versions? Or only new versions for 8.3xx ? (in other words; might the btserver fix the bluetooth problems in 8.204?)

on 930 it works great

on tt one 1st it crashes when i touch display to get to the main menu any ideas?


The same on my rider v1.

Samson

on 930 it works great

on tt one 1st it crashes when i touch display to get to the main menu any ideas?

Also happened with the previous 8.3xx version (on my TTOne), so I doubt we will get a better NC then 8.204

on 930 it works great

on tt one 1st it crashes when i touch display to get to the main menu any ideas?

maybe your TTONE doesn't have free RAM memory to load v8.310, and when you clik on the display it freezes.

Try to clik on right bottom of the screen immediately after start it, and you will see its free RAM memory.

Bye! :wave:

bt equal with 300 320
bt dif with 204
rds dif 204 300 320

works then bt now?, can not harm to try it

was there not with 8300 a strange Way for ones to use Home Files also on Device?

Free RAM:confused: you mean the virtual "what tell we the stupid Users how many RAM is free" Value

Hi,
no when tomtom is started i have 5,8mb free memory !

Samson

What is the purpose of the ttsystem_8.310.9760_mappatch.zip file?



I ask the same question. What is the purpose of the ttsystem_8.310.9760_mappatch.zip file if I already have SE_ttsystem_8.310.9760.rar file?
:confused: :confused: :confused: :confused: :confused: :confused: :confused:

Hello
i tried on my go 910 but it's seems doesn't work.
It freeze on Boot - No disk Activity

My BL: 5.5106

TTuser states the following in the "readmenot" file:

you can also write the switchfile Names in a File setconfig.txt
to know how see into the Example File
Settings with a own unique Value needs a : on End
model:
changedtext:
sdid:

with setconfig.txt works the single switchfiles not more except

a seperate model.txt override the model: Entry in setconfig.txt

model.txt + cycle.txt
version.txt works only separate.

Can anyone be so kind to explain what this mean?

:thanks:

I ask the same question. What is the purpose of the ttsystem_8.310.9760_mappatch.zip file if I already have SE_ttsystem_8.310.9760.rar file?
:confused: :confused: :confused: :confused: :confused: :confused: :confused:
Thats the sort of question that TTuser loves to get....
especially when he's already answered it once in this thread!! For the cheap seats then,the mappatch file is for guys aready using 8310 officially who want to use "borrowed" maps on their x40....

:ilove:

please rapidshare file of it
can't download with jdownloader its blocked on this pc

Here you are:

http://rapidshare.com/files/188154552/navcore_SE_8.310.9760_Basicpack.rar
http://rapidshare.com/files/188157805/SE_ttsystem_8.310.9760.rar
http://rapidshare.com/files/188176543/Home_dll_8-310-9760-1.rar
http://rapidshare.com/files/188180004/ASR.rar
http://rapidshare.com/files/188184084/ttsystem_8.310.9760_mappatch.zip

thanks terrytpot !

TTuser states the following in the "readmenot" file:
you can also write the switchfile Names in a File setconfig.txt
to know how see into the Example File
Settings with a own unique Value needs a : on End
model:
changedtext:
sdid:
with setconfig.txt works the single switchfiles not more except
a seperate model.txt override the model: Entry in setconfig.txt
model.txt + cycle.txt
version.txt works only separate.

Can anyone be so kind to explain what this mean? :thanks:

His English might not be perfect, but IMHO the above is pretty clear.
I'll try to write the same in other words;
all the switchfiles (like NOTTS, RM, FMON etc...) don't have to be placed seperately in the root (old style) or the config directory. Now you can create a file named setconfig.txt (placed in directory named config) In this text file you can write all switch options. To make it clear look at the sample setconfig.txt file in the config directory

Settings with unique values needs a : on the end of the line, in example
model:
changedtext:
sdid:

When this new added option (setconfig.txt) you can not use the seperate switch files anymore (nor the old style where you placed them in the root, not the previous style where you placed them in the config directory).
The only exceptions to this are;
model.txt - this file overrules the model: setting in the setconfig.txt
cycle.txt - this file needs to be seperate in the config directory
version.txt - this file needs to be seperate in the config directory

Hope this alternate explanation made it clearer for you.... still; now it's;
German --> English --> Dutch --> English :confused:

I believe it means;

You now have the option of using the new, "setconfig.txt."
I have included an example of how it may be used.
Settings which have their own unique value must end with a colon. Thus :
For example,
model:
changedtext:
sdid:
etc.

If you chose to use the setconfig.txt, then any single switchfiles in root will no longer work,
with the exception of model.txt, cycle.txt and version.txt.
If you place a model.txt in root as well as, model: in the new, setconfig.txt., the model.txt in root will take precedence over the, model: entry.

So for example, if you had in root, model.txt X20
and in setconfig.txt an entry which said model:X30
Your device would use the model.txt X20

I hope this is correct!


Oops! beat me to it! :)

Well its works fine in my 930
i did tried it today to my work HD working fine
GPS also working fine and Fast GPs load

@lessram

"pps.; now tried it..... the new system file works without problem on my TTOne v2"

You are referring here only to the system file working on your TTOne v2 and not the entire 8.310 Nav?

Yep !!!
The system file only. Not NavCore 8.310 !!
I placed the system file on my SD card with 8.204 it updated my tomtom One and it still works.
(Had the hopes that after the update maybe NC 8.3xx would work also..... but not)

No stuttering voices on 720 (not for me anyway)
Yes, here too.
I´ve fed my 720 with new basic pack and new ttsystem file and it runs absolutely best.

@TTUser
Thanks a lot!

Thanx TTUser!!!!!!

****, the old bug is still there. The favorite icon is displayed next to the wrong favorites .

I'll try to write the same in other words;
all the switchfiles (like NOTTS, RM, FMON etc...) don't have to be placed seperately in the root (old style) or the config directory. Now you can create a file named setconfig.txt (placed in directory named config) In this text file you can write all switch options. To make it clear look at the sample setconfig.txt file in the config directory

Settings with unique values needs a : on the end of the line, in example
model:
changedtext:
sdid:

When this new added option (setconfig.txt) you can not use the seperate switch files anymore (nor the old style where you placed them in the root, not the previous style where you placed them in the config directory).
The only exceptions to this are;
model.txt - this file overrules the model: setting in the setconfig.txt
cycle.txt - this file needs to be seperate in the config directory
version.txt - this file needs to be seperate in the config directory

Hope this alternate explanation made it clearer for you.... still; now it's;
German --> English --> Dutch --> English :confused:

Much more clear now with your explanation.

German --> English --> Dutch --> English --> Spanish --> Spanish :hehe:

Thanks lessram

Experience valid for Go 700:

#New bootloader works fine.
#New ttsystem causes unit to freeze on boot.

I notice that there is a Home dll in TTUser's package, but not a Navcore.8.310.9760@tomtom.com folder to put it in. Ideas???

I notice that there is a Home dll in TTUser's package, but not a Navcore.8.310.9760@tomtom.com folder to put it in. Ideas???

You just let TTHome download the files, then you change the dll with the patched one delivered with TTuser pack ;)

Do you know how to save all the old mapshare corrections when you change the navcore ? Everything is reseted :(

Hey Lesserman
this navcore is For x40 device only
but TTuser had made this version of x20 x30 devices
so till now its not working at One i did tried but its freez
but its works fine in my 930 fine

on my 920 voices works only a few of minutes and if i change the night mode, voices doesnt works. any ideas? i copied basic pack and SE system

on my 920 voices works only a few of minutes and if i change the night mode, voices doesnt works. any ideas? i copied basic pack and SE system

I dont use voice i use Silent Voice so dont know
Maybe try to install new Voices with TThome

You just let TTHome download the files, then you change the dll with the patched one delivered with TTuser pack ;)

I thought that was the way, but wanted to double check.

:thanks:

Any PRO or CON feedback on the new bootloader 5.5112????????????

Guys check out this video of the 740 live :

http://www.tomtom.com/products/product.php?ID=791&Category=0&Lid=4

Does anyone know how to make the Tomtom beep when the icons are pressed on the screen??

Thanks TTuser!!

Workt great on a OneXL. The new bootloader 5.5122 is working as well.
You're (of course) the best...

how can i make it work´s on my one v4? help

Thanks TTuser!!

Workt great on a OneXL. The new bootloader 5.5122 is working as well.
You're (of course) the best...

I agree however one small problem - when clicking on the bottom left corner to change the volume causes TT to freeze then an auto reboots back again.

---- Crash report ----
Pid: 00654
Timestamp: 2009-01-23 23:41:34
Version: 8.310.9760
Received signal 11 [errno 0, code 1]
Fault address: 0x14
Backtrace:
ttn(sin+0x9a4)[0x11bf0]
ttn(tan+0x2db8)[0x13744]
/lib/libpthread.so.0[0x40138bd0]
ttn[0x395a20]
ttn[0x2e268]
ttn[0x250cc8]
ttn(sin+0x650)[0x1189c]
/lib/libosal.so.0(_ZN20COSALActiveScheduler11RoundRobbi nEv+0x98)[0x4003abbc]
ttn(sin+0x12d0)[0x1251c]
/lib/libc.so.6(__libc_start_main+0xdc)[0x401a7cd4]
---- End of crash report ----

Next task is TTS

If i change model.txt to x20 i can click on the volume button without it freezing however voices do not then work.

So will stick with ori and deal with the freezing.

If I use any emulation(xls,x20,x30) there is no sound none of the voices work (human or computer)

On a OneXL is there any advantage to using Nav SE 8.310 over 8.204 or 8.300? What are the differences that could be utilized by a basic TT?
Thanks in advance for any replies.

Hey Lesserman
this navcore is For x40 device only
but TTuser had made this version of x20 x30 devices
so till now its not working at One i did tried but its freez
but its works fine in my 930 fine


Hey TTosser1, his name is Lessram.

yeah thanks terrytpot, much better response to the question! :-)

hello,

everything seems to be working better on my 720 go. thankyou

but, does anyone know why my phonebook went to numbers and not names?

i had v8.204 and i could see my phonebook as names, is there a file or something i can do to see my phone book as names and not numbers?

thankyou

Does FM transmission for navigation instructions work with this navcore? I am pretty sure the music plays, but TomTom have disabled voice transmission over FM in 8.300, so I am wondering about this new release.

The new bootloader 5.5122:
Where is it good for?
Does it make sense on Go 720?

Thanks for helpful answers.

I have tried this version on a 910, but it freezes on boot screen.

New bootloader 5.5112 works great though.

Thanks,
works great so far and no message "please download software to use rds traffic...." any more for my go 910.

It froze on my 910 at boot screen. I used x40 emulation
and the new bootloader 5.5112

The mapshare update is not working here
can someone confirme this ?

The new bootloader 5.5122:
Where is it good for?
Does it make sense on Go 720?
Thanks for helpful answers.

If it ain't broken don't fix it
I tried the new BL hoping NC 8.3xx would work on my TTOne. But if everything works why would you update.

The mapshare update is not working here
can someone confirme this ?
I´ve just made it, both mapshare & gpsfix, got excellent updates.

working not on tt1v1 freeze on after i touch the screen for function.all previous version worked..any one got it working on tt with 32 mb of ram version not 64mb .even there is a backtrace.txt on there is crash report .which i cannot understand.

Is the light sensor fixed with this version for x10 and x20 devices, since it was NOT WORKING in 8.204.

Also, does this version have the microphone icon on the map page for voice recognition?

Is the light sensor fixed with this version for x10 and x20 devices, since it was NOT WORKING in 8.204.

Also, does this version have the microphone icon on the map page for voice recognition?

All working on GO 920
fm works only whit music function.
new bootloader okay on 920.
dimlight function does'nt work in x40 mode

Thanks TTuser to give us this one again

****, the old bug is still there. The favorite icon is displayed next to the wrong favorites .

Can someone confirm this behavior?

I put a picture "altfav_Home.bmp" in the directory "Skins" . This picture is not next to my apartment, it is next to another favorite.

Could you please check this?

:thanks:

Is the light sensor fixed with this version for x10 and x20 devices, since it was NOT WORKING in 8.204.

Also, does this version have the microphone icon on the map page for voice recognition?

Light sensor working on my 720 and the microphone icon is there with speech commands working as well

Light sensor working on my 720 and the microphone icon is there with speech commands working as well

how is the light sensor working for you? My light sensor on my 920 does not work in x40 emulation..

how is the light sensor working for you? My light sensor on my 920 does not work in x40 emulation..

Maybe because you have a 920 and I have a 720???

I know its working because if I turn out my light it goes into dark menus and map colours and when turned back on it goes into day menu and map colours

Oh and it HAS to have a valid GPS signal to do the switching... Dont know why this is but it will only automatically switch when it has a valid lock

Maybe because you have a 920 and I have a 720???

I know its working because if I turn out my light it goes into dark menus and map colours and when turned back on it goes into day menu and map colours

Can't be the 720 and 920 have the same hardware. So you are running in x40 emulation (new icons) and the light sensor works? Maybe I'm doing something wrong..

Hey TTosser1, his name is Lessram.


Hey rytenuff i 'did't know that you are Advocate
but my name TTuser1,

Maybe because you have a 920 and I have a 720???

I know its working because if I turn out my light it goes into dark menus and map colours and when turned back on it goes into day menu and map colours

Scooter...does sensor work only if you have the unit on the car stand? Or does the light sensor also work when the unit is not mounted.

In 8.204, sensor was only working when docked in the car mount.

does anyone know if the Enhanced Positioning Technology works ok on this Naccore?

doesnt work on my 710 locks on screen about product code

Hey TTosser1, his name is Lessram.

Hey rytenuff i 'did't know that you are Advocate
but my name TTuser1,

Yo TTLuser1,
rytenuff misspelled your "name" on purpose, since you got Lessram's wrong!!!

:backtotopic:

Maybe because you have a 920 and I have a 720???

I know its working because if I turn out my light it goes into dark menus and map colours and when turned back on it goes into day menu and map colours

Kindly share what emulation you have set on your 720 & how you have your Brightness preferences set up. [B]My[B] 720 light sensor doesn't function with 8.204 or 8.310.

Yo TTLuser1,
rytenuff misspelled your "name" on purpose, since you got Lessram's wrong!!!
:backtotopic:

TTUser1 also misspelled my alias on purpose.
And when it comes to aliasses, what's in a name when you copy "Tha King's" name.
But don't bother.... lets just talk about TomTom

My setup is standard and emulation is X40 and I have new icons (Although for some reason I have the brown background instead of blue when unit asks to connect to computer). Because of problems before with maps and voices stuttering and being really slow I formatted my device. I installed my original map (715) and deleted all navcore. TTH installed Navcore 7 then upgraded to Navcore 8.300 (for the X20 devices). Everything was working fine including auto volume (something that didnt work out of the box).

I then unzipped 8.310 navcore over the top (the one from the TOMTOM site not the basic pack). everything was working fine. However I have since upgraded to 815.2003 UK map and patching it the auto dim and auto volume refuse to work. I tried to revert back to my old map but it still wont work (should have made a backup). If I have time I will try the whole process again to see if it goes back.

Just a thought. Could upgrading to the newest bootloader have made a difference. I didnt do it for the last couple of navcores but I forgot about it this time and it upgraded..

Hi,

i hope that somebody can help me: I installed TOMTOM 8.310 on my Go 520 and have Problems with the TTS Voice. I used the german one (Katrin) and when i'm driving into a "traffic circle" (i hope that this is the correct english word for that) it says: Drive into the "traffic circle take the 3rd exit, 3rd exit. i mean that it repeats the word 3rd exit two times. between it the sound "scratches"
I hope that you know what i mean :)

Neo

Hi,

i hope that somebody can help me: I installed TOMTOM 8.310 on my Go 520 and have Problems with the TTS Voice. I used the german one (Katrin) and when i'm driving into a "traffic circle" (i hope that this is the correct english word for that) it says: Drive into the "traffic circle take the 3rd exit, 3rd exit. i mean that it repeats the word 3rd exit two times. between it the sound "scratches"
I hope that you know what i mean :)

Neo

the ttloquence map of the 930 is needed for this one
try to find it en replace it whit 930 tts folder

Hmm, i tried to delete the Louquendo TTS Folder on my tomtom and then TOMTOM Home tells that i can download it from their server. It is V.700. Is it the x20 or x30 voice??
Where can i get the x30 voice?

TTUser1 also misspelled my alias on purpose.
And when it comes to aliasses, what's in a name when you copy "Tha King's" name.
But don't bother.... lets just talk about TomTom

i didnt misspelled your name on purprose,
i am really sure i didn't its come because of my Keyboard,i think the battery is the issue
and again sorry, I DID NOT ON PURPOSE

My setup is standard and emulation is X40 and I have new icons (Although for some reason I have the brown background instead of blue when unit asks to connect to computer). Because of problems before with maps and voices stuttering and being really slow I formatted my device. I installed my original map (715) and deleted all navcore. TTH installed Navcore 7 then upgraded to Navcore 8.300 (for the X20 devices). Everything was working fine including auto volume (something that didnt work out of the box).

I then unzipped 8.310 navcore over the top (the one from the TOMTOM site not the basic pack). everything was working fine. However I have since upgraded to 815.2003 UK map and patching it the auto dim and auto volume refuse to work. I tried to revert back to my old map but it still wont work (should have made a backup). If I have time I will try the whole process again to see if it goes back.

Just a thought. Could upgrading to the newest bootloader have made a difference. I didnt do it for the last couple of navcores but I forgot about it this time and it upgraded..

Patching a map, or installing a patched map, shouldn't have any effect on auto dim or auto volume. If you reinstall NC 8.300 from TTHOME & auto dim & volume don't function, then the NEW bootloader would be suspect. Please let us know your results if you redo your 720.

if i try to connect my tomtom 730 with my pc and click to yes the display will be black and it shut down and i have to make a reset to turn it on with the power button but i cannot connect it to the pc anymore :(

My setup is standard and emulation is X40 and I have new icons (Although for some reason I have the brown background instead of blue when unit asks to connect to computer). Because of problems before with maps and voices stuttering and being really slow I formatted my device. I installed my original map (715) and deleted all navcore. TTH installed Navcore 7 then upgraded to Navcore 8.300 (for the X20 devices). Everything was working fine including auto volume (something that didnt work out of the box).

I then unzipped 8.310 navcore over the top (the one from the TOMTOM site not the basic pack). everything was working fine. However I have since upgraded to 815.2003 UK map and patching it the auto dim and auto volume refuse to work. I tried to revert back to my old map but it still wont work (should have made a backup). If I have time I will try the whole process again to see if it goes back.

Just a thought. Could upgrading to the newest bootloader have made a difference. I didnt do it for the last couple of navcores but I forgot about it this time and it upgraded..

Hi Scooter,

What bootloader version did you have before when the auto dim was working?

Has anyone a working version of this on a 720 that they could up to rapidshare (or similar), minus the maps of course??? I have now tried 5 or 6 times to get this working on my 720, and every time it either comes up with garbeled graphics, or failed to work at all :(
Not sure if it's me, or if it's my 720 thats playin up, however i'm about to launch the thing out the window!!!

Thanks guys
Paul

Has anyone a working version of this on a 720 that they could up to rapidshare (or similar), minus the maps of course??? I have now tried 5 or 6 times to get this working on my 720, and every time it either comes up with garbeled graphics, or failed to work at all :(
Not sure if it's me, or if it's my 720 thats playin up, however i'm about to launch the thing out the window!!!

Thanks guys
Paul

--------------------------------------------------------------------------------

Megaupload all files:
http://www.megaupload.com/?d=UCB7DIQ1

ASR:
http://www.megaupload.com/?d=X87CZ6I5

password: Javiermb.com

hello everyone I'm having trouble converting my 920 to use navcore 8.310. how do you change to x30??... do you put the config setting folder in the outsource folder or in the main drive?? if i put my config folder in the main drive (h: where tomtom main files are) my T920 would freeze and keep restarting by it self.. but if i put in inside the outsource folder it works fine but its using x40 emu.. can someone tell me what am i doing wrong??


my setconfig has this

model:x30
runclean
viewmsg
sdid:1
runcheck
changedtext:TomTom GO 940 LIVE
delgns
delmap
ttsoff
bton
fmon
rm
nomsg
usesetting
cleanflash
noqfixdel

and also have version.txt A:8300
B:9732

model.txt x30

I have a big strange problemi with my go 910.

I install basickpack + settsystem, but it boot, and freezew on window with tomtom white text and logo..

Is very strange, i upgrade many navcore on my 910, only this has this problems....

Can anyone helps me?

My TOMTOM is stuttering since i use 8.310. Maybee it is because of using the TTS Voice that came with my Device (Go520) but is there any difference to the voice files originaly came with Go940??

Hello...
All 910 and 700 are same problem. Not Boot
The 910 and 700 shall have a hard disk.

Wait !!! Perhaps a fix in v1.1 of the master TTuser !!!

Thank you for reply!

--------------------------------------------------------------------------------

Megaupload all files:
http://www.megaupload.com/?d=UCB7DIQ1

ASR:
http://www.megaupload.com/?d=X87CZ6I5

password: Javiermb.com

Many thanks, however that wasnt what i'm after.... Just a full dump (minus maps) of a working 720 with this on. I have the source files, and it's those that i seem to be having the problems with!!

Ta :D

Many thanks, however that wasnt what i'm after.... Just a full dump (minus maps) of a working 720 with this on. I have the source files, and it's those that i seem to be having the problems with!!

Ta :D

A "full dump" w/o maps would be no different than than the "source files" except for the ttsystem file, which is device specfic and would do you no good.

Hi TTuser,
Everything work fine on my GO510 !!
-TTS,
-ASR,
-MP3,
-PHONE,
-And so on ...

The sound is very low with that version (8.310) compare to the V8.204 (very good).
And I found the light of the screen goes down only when the 510 is on his dock.

Finally, I keep this version instead of using V8.320 ...

Thanks a lot once again

:thanks:

Hello,

No success on my 710, it freezes and reboots when starting up...

A "full dump" w/o maps would be no different than than the "source files" except for the ttsystem file, which is device specfic and would do you no good.
You are right.
BUT
However in theory the hardware is all identical (within tolerances). So please tell - why would it work on one 720 for arguement sake, and not on another??

1. the biggest different between equal Devices (Hardware) is the BL
2. Device Owner Error

since nobody seems able to write a exact Description include much Infos as possible can you search forever what makes the different between works and not works

You are right.
BUT
However in theory the hardware is all identical (within tolerances). So please tell - why would it work on one 720 for arguement sake, and not on another??


Installation error!!!

has anyone seen my previews posting?? can someone tell me the proper way to change the emu to x30 or x20

emu x30

put the value X30 in a text file
model.txt (model.txt in the root or in the \config directory)

emu X40 : idem, put the value X40

----------------------------------------------------------
[TomTomGo]
DeviceName=TomTom GO 720
DeviceVersionHW=GO 720
DeviceSerialNumber=M67297XXXXXX
DeviceUniqueID=XXXXX XXXXX
RamDiskVersion=20090114
BootLoaderVersion=55022 (I use bootloader 5.5022 the best for TT GO 720)
LinuxVersion=269512
ApplicationVersionVersionNumber=8310
ApplicationVersion=9760
UserLanguage=your's
UserName=your email account
LastConnectionTime=2009/01/26,14:20:17,UTC
LastConnectionPhone=,
GPSFirmwareVersion=GSW3.2.4TT_3.1.00.12-C35B1.02
BuiltInColorScheme0=Belgica
BuiltInColorScheme1=Brittanica
BuiltInColorScheme2=America
BuiltInColorScheme3=Germanica
BuiltInColorScheme4=Australia
BuiltInColorScheme5=Deuteranopia
BuiltInColorScheme6=Greys
BuiltInColorScheme7=Antarctica
BuiltInColorScheme8=Africa
BuiltInColorScheme9=Astra
CurrentColorSchemeBuiltIn=0
CurrentVoiceInfo=Juliette
CurrentMap=France
CurrentMapVersion=815.2003
CurrentHomeLocation=
Traffic=Y
....
...
----------------------------------------------------------
But u must first create a valid ttgo.bak/ttgo.bif file in the root
so see the file model upwards for both...
----------------------------------------------------------
Works like a charm in emu X30/X40 on my TTGO 720
nothing to say...

To get gprs wireless bluetooth trafic with subscription via a gsm mobile
u must be in X30 emu... x40 emu is for X40 live with a special sim card...
----------------------------------------------------------

emu x30

put the value X30 in a text file
model.txt (model.txt in the root or in the \config directory)

emu X40 : idem, put the value X40

----------------------------------------------------------

----------------------------------------------------------
But u must first create a valid ttgo.bak/ttgo.bif file in the root
so see the file model upwards for both...
----------------------------------------------------------
Works like a charm in emu X30/X40 on my TTGO 720
nothing to say...

To get gprs wireless bluetooth trafic with subscription via a gsm mobile
u must be in X30 emu... x40 emu is for X40 live with a special sim card...
----------------------------------------------------------

I did that before... if i create a folder config with model.txt in the main directory my nav would freeze and keep resetting... but if i create a folder inside outsource bin it work but it doesn't change the emu...

how do i make a ttgo.bak/ttgo/bif... can you send me your dump?? of course with out the map

u have a mini basic valid ttgo.bif in the legal tomtom distribution called
navcore_8.310.9760.go940 (on tomtom server whose adress has been yet given...)

[TomTomGo]
RamDiskVersion=20090114
Bootloaderversion=5.2701
LinuxVersion=269512
ApplicationVersion=9760

It's a text file to complete a little bit with notepad editor
(add your's personal information and tomtom email account, see exemple...)


In fact u create first a valid ttgo.bak file
and this one will create on succesfull boot the valid ttgo.bif file
which is the only one used by navcore.

U can also use an automatic creation with version.txt file (see doc. in readmenot.txt)
..........................
.........................
The file ttgo.bif has the official Settings for your TT Device. This may be not the actual Situation.
If you run another Navcore than the official one you can set the correct one. This information is used
by TT Home for updating/upgrading.
Use version.txt in root or /Config with your needed Numbers.

Current for:

TomTom GO, GO x00, GO x10, ONE 1st Edition, ONE 2nd Edition
A:7903
B:9183

Rider
A:7901
B:9181

ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd Edition
A:8010
B:9369

x20,x30,630
A:8300
B:9732


With the Switchfiles in Root or in Folder Config can you configure alone your Device.
Use the Files in root or /Config. Only root or Folder Config, NOT both!

Installation error!!!

And that would be exactly why i was after a grab from a working system!!

lol - talk about going round in circles!!

TTuser - i have to admit i thought of that one as the only difference a couple of mins after i posted. The only other that i could think of would be tolerences on the device, however would be more unlikely!

Originally Posted by tendriver
Installation error!!!

And that would be exactly why i was after a grab from a working system!!

lol - talk about going round in circles!!

TTuser - i have to admit i thought of that one as the only difference a couple of mins after i posted. The only other that i could think of would be tolerences on the device, however would be more unlikely!

If it is Installer error, why do you think you could do better installing a "grab from a working system" than installing the "source files"?

Hi!
I heaw same problem with my GO910, freazes on startup screen.
Anny news for GO910???

u have a mini basic valid ttgo.bif in the legal tomtom distribution called
navcore_8.310.9760.go940 (on tomtom server whose adress has been yet given...)

[TomTomGo]
RamDiskVersion=20090114
Bootloaderversion=5.2701
LinuxVersion=269512
ApplicationVersion=9760

It's a text file to complete a little bit with notepad editor
(add your's personal information and tomtom email account, see exemple...)


In fact u create first a valid ttgo.bak file
and this one will create on succesfull boot the valid ttgo.bif file
which is the only one used by navcore.

U can also use an automatic creation with version.txt file (see doc. in readmenot.txt)
..........................
.........................
The file ttgo.bif has the official Settings for your TT Device. This may be not the actual Situation.
If you run another Navcore than the official one you can set the correct one. This information is used
by TT Home for updating/upgrading.
Use version.txt in root or /Config with your needed Numbers.

Current for:

TomTom GO, GO x00, GO x10, ONE 1st Edition, ONE 2nd Edition
A:7903
B:9183

Rider
A:7901
B:9181

ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd Edition
A:8010
B:9369

x20,x30,630
A:8300
B:9732


With the Switchfiles in Root or in Folder Config can you configure alone your Device.
Use the Files in root or /Config. Only root or Folder Config, NOT both!

i created ttgo.bak by version.txt but i can use only screen under main map screen, in fact my 720 run in x30 emulation but when i press main map screen and want to go to menu tomtom freeze.

tomtom working right only if i delete model.txt

p.s. what mean "sdid" in setconfig.txt

i created ttgo.bak by version.txt but i can use only screen under main map screen, in fact my 720 run in x30 emulation but when i press main map screen and want to go to menu tomtom freeze.

tomtom working right only if i delete model.txt

p.s. what mean "sdid" in setconfig.txt

With a 720 you don't need any of the extra files or folders. Just copy the Navcore files, ASR folder & patched ttsystem file into your 720 and you are done.

With a 720 you don't need any of the extra files or folders. Just copy the Navcore files, ASR folder & patched ttsystem file into your 720 and you are done.Not so.
I have 520.
Copied only these files & it runs in x40 mode.
Result = loss of function.
To get functions back requires x30 mode.
To get x30 requires files you advise not needed.
Copy them across = freeze.
Circles.

Not so.
I have 520.
Copied only these files & it runs in x40 mode.
Result = loss of function.
To get functions back requires x30 mode.
To get x30 requires files you advise not needed.
Copy them across = freeze.
Circles.

The poster that I replied to has a 720, not a 520. I also have a 720 and have never used the extra stuff with no lost of function except auto dim. With Voice Command, no auto dim is no problem.

The poster that I replied to has a 720, not a 520. I also have a 720 and have never used the extra stuff with no lost of function except auto dim. With Voice Command, no auto dim is no problem.

i know that i dont need any special files to right working my device, but if TTuser gives us SE version and writes how we have to use it, i just give report about problems on my device, in any post before somebody wrote in what way we should use it to right working, on my device this way is wrong thats why i wrote about

rgs uzin2

So how to apply this on my go930..any instructions? thanks

Good job TTuser :)

This Navcore works quite okay on my 930. I deleted most of the switch files, except BT, FM, Saveram mode and use x40 emu.

BT, FM, and even the recorded noTTS Voices work
EPT not working (may be because it is not supported from Go940)

In x40 emu with original computer voices, I can not choose the TTS option read street names, the first 3-4 boxes in this menue are greyed out.

Have a nice day

does anyone know if the Enhanced Positioning Technology works ok on this Naccore?

it does not work on my 930 with navcore 8310

work only with navcore 8.320

I have downloaded all the files, can someone tell me how to put them in my GO930, like what files to copy etc. Thanks.

i read that some ppl here have hd traffic working with the hd traffic receiver.

i downloaded the full cab x940, and replaced the ttsystem and the outsourced bin.
everything is working great except hd traffic, i get the message "battery low"

oke fine, changed in model.txt to x30, my go930 freezes everytime i start up.
tried the setconfig.txt and still freezing. deleted the file and it works again like a charm, except the hd traffic. How did you guys got the hd traffic working?

---------------------------------------------------------------------------------------------------



and yotrek you can download the x40 cab, copy all to the device (or an sd card)
download SE_ttsystem_8.310.9760 and extract and copy everything to the root of the tomtom (or sd card)

reboot and it works.

[QUOTE=elroy944;2497742]i read that some ppl here have hd traffic working with the hd traffic receiver.

i downloaded the full cab x940, and replaced the ttsystem and the outsourced bin.
everything is working great except hd traffic, i get the message "battery low"

oke fine, changed in model.txt to x30, my go930 freezes everytime i start up.
tried the setconfig.txt and still freezing. deleted the file and it works again like a charm, except the hd traffic. How did you guys got the hd traffic working?

Am I correct to think that you do have a HD receiver?

[QUOTE=elroy944;2497742]i read that some ppl here have hd traffic working with the hd traffic receiver.

i downloaded the full cab x940, and replaced the ttsystem and the outsourced bin.
everything is working great except hd traffic, i get the message "battery low"

oke fine, changed in model.txt to x30, my go930 freezes everytime i start up.
tried the setconfig.txt and still freezing. deleted the file and it works again like a charm, except the hd traffic. How did you guys got the hd traffic working?

Am I correct to think that you do have a HD receiver?

yes i have a tomtom go930 and a tomtom hd traffic receiver (the one that also is an car charger)

hi lads, installed 8.310 on my go920 ....
and have this same problem : can't switch x30 emulation on, doesn't matter where's 'x30'.. in model.txt or in setconfig.txt always this same effect: TT freezes when touchin the screen :(
anyone has idea how to turn GPRS and Google search in 'x40' emu mode on ?

i read that some ppl here have hd traffic working with the hd traffic receiver.

i downloaded the full cab x940, and replaced the ttsystem and the outsourced bin.
everything is working great except hd traffic, i get the message "battery low"

oke fine, changed in model.txt to x30, my go930 freezes everytime i start up.
tried the setconfig.txt and still freezing. deleted the file and it works again like a charm, except the hd traffic. How did you guys got the hd traffic working?

---------------------------------------------------------------------------------------------------



and yotrek you can download the x40 cab, copy all to the device (or an sd card)
download SE_ttsystem_8.310.9760 and extract and copy everything to the root of the tomtom (or sd card)

reboot and it works.

Thank you I'll try it..

x30(or X40) values are in model.txt (in root or in \config directory)

hi lads, installed 8.310 on my go920 ....
and have this same problem : can't switch x30 emulation on, doesn't matter where's 'x30'.. in model.txt or in setconfig.txt always this same effect: TT freezes when touchin the screen :(
anyone has idea how to turn GPRS and Google search in 'x40' emu mode on ?

The x40 LIVE series has a GPRS receiver & sim card built in. Without a receiver, no LIVE services.

possible : u can only obtain tomtom trafic in x30 emu with wireless bluetooth gprs via a gsm having a valid subscription (tomtom account) it's works fine on my 720.
in x40 emu on a 720/920/930 nothing is possible except when setting on a rds/tmc antena to obtain tomtom trafic.

...i know, but whole problem is: can't turn x30 emu on my go920 - all freezes :(

which libaec.so should I chose?

So it's confirm, with this Navcore..Auto Dim, EPT and Light Sensor doesn't work GO930, is there going to any fix? or this is it?, thank any info appreciated.

Guys, I have copied all these files, except the latest Boot file (system) to my 720. But, I have lot of stuttering now (voice slowws down, map moves very slow bit-by-bit etc).. is it because of not upgrading to latest boot file or some other problem ?

Guys, I have copied all these files, except the latest Boot file (system) to my 720. But, I have lot of stuttering now (voice slowws down, map moves very slow bit-by-bit etc).. is it because of not upgrading to latest boot file or some other problem ?

No problem with 8.310 in my 720 w/ BL 5.5106. Last time I had your problems, the battery was low.

There is a "traffic circle" in Long Beach, Ca...i have not used my 720 on it, but in the past my 910 would freak out and tell me "exit 2nd exit on lakewood boulevard, exit lakewood boulevard right, stay right,"

I think the concept of a circle in the routing process is not quite common. (at least no to the extent of the "traffic circle" in Long Beach.

Hi,




i hope that somebody can help me: I installed TOMTOM 8.310 on my Go 520 and have Problems with the TTS Voice. I used the german one (Katrin) and when i'm driving into a "traffic circle" (i hope that this is the correct english word for that) it says: Drive into the "traffic circle take the 3rd exit, 3rd exit. i mean that it repeats the word 3rd exit two times. between it the sound "scratches"
I hope that you know what i mean :)

Neo

I have go 720 and navcore_8.310.9760.go540-go740.cab. everything is fine but antitheftw.bmp shutdown screen. every time I shutdown my unit it is dimmed (not backlighted). what's wrong?

It is dimmed when you shut it down on the 740, so no problem there.

I have go 720 and navcore_8.310.9760.go540-go740.cab. everything is fine but antitheftw.bmp shutdown screen. every time I shutdown my unit it is dimmed (not backlighted). what's wrong?

You need to have an ogg file called "suspend" in root. It will stay lit for the length of the ogg file. The attached one is in English. You can make your own with Audacity which is free. Just copy the specs of this one.

any way to fix the freezing screen problem on ONEs?

I have a ONE 3rd Ed. V6 and I have the same problem on all 8.3xx versions it's like the screen doesn't load the icons. It doesn't show the + and - to zoom map, it loads a square or similar.

..found something cool :) about using BT remote :
press and keep pressed small middle button : qiuck menu pops up
press and keep pressed big middle button : activated voice control :)

..was waitin agres for voice control activated by BT remote

... my mirror with Navcore 8.310.9760 (by TTUser)

ASR : http://www.filefactory.com/file/a04chf4/n/ASR_rar
Home dll : http://www.filefactory.com/file/a04chg1/n/Home_dll_8-310-9760-1_rar
Basic pck : http://www.filefactory.com/file/a04chg0/n/navcore_SE_8_310_9760_Basicpack_rar
SE System : http://www.filefactory.com/file/afgbdhb/n/SE_ttsystem_8_310_9760_rar

..download, unpack, install and ...enjoy

kreisverkehr = (traffic circle) = roundabout

Hello, I just installed this Navcore on my 730. I created a folder in "extension" called :
Navcore.8.310.9760@tomtom.com and put "Home_dll_8-310-9760-1" dll in it.

I can't get updates...Do I have to change ttgo.bif and ttgo.bak info ?
For now I have: DeviceVersionHW=GO 730, do I have to change it into 740 ?
As this navcore is a x40 one ? thx !

hi mates

still the best navcore for go 720 is 8.203 ...
i tried new 8.310 but its faulty like 8.204 ...
its not calculate distance when you drive ..

Hello, I just installed this Navcore on my 730. I created a folder in "extension" called :
Navcore.8.310.9760@tomtom.com and put "Home_dll_8-310-9760-1" dll in it.

I can't get updates...Do I have to change ttgo.bif and ttgo.bak info ?
For now I have: DeviceVersionHW=GO 730, do I have to change it into 740 ?
As this navcore is a x40 one ? thx !
... version of navcore can't change ur real device hardware ...just emulation . TT Home can see ur tt real harware id so u can't take any update for x40 devices if u have x30

hi mates

still the best navcore for go 720 is 8.203 ...
i tried new 8.310 but its faulty like 8.204 ...
its not calculate distance when you drive ..

...well, 8.310 workin better on 720 than 920 so don't know what is ur problem with ... maybe have u wrong version ot the maps ?

hi mates

still the best navcore for go 720 is 8.203 ...
i tried new 8.310 but its faulty like 8.204 ...
its not calculate distance when you drive ..

8.310 is functioning quite well on my 720!!!

Hello, This Navecore 8310 already works on GO 910????
Thanks

Hello all,
I have tried this version on my GO910 and the boot freeze on the start-up picture on after that, there is no more disk activity.
I have reinstalled the 8.204 1.5 version and everything is back to OK...
I read at the begining of the thread that some one had scceeded to run this version on a GO910 but there is no precision on how it was possible???
If some one succeed, tell us how to get this result?
Thanks in advance.

try x30emu in Config folder or d root

... version of navcore can't change ur real device hardware ...just emulation . TT Home can see ur tt real harware id so u can't take any update for x40 devices if u have x30

But can i get mapshare and ephemeris updates ? if yes, what did I do wrong ?
Is there a cracked Navcore.8.310.9760@tomtom.com somewhere or is 8-310-9760-1 file is the only file needed ?:thanks:

But can i get mapshare and ephemeris updates ? if yes, what did I do wrong ?
Is there a cracked Navcore.8.310.9760@tomtom.com somewhere or is 8-310-9760-1 file is the only file needed ?:thanks:
mapshare updates hasn't somthing to go with firmware version or hardware, they are just for maps.
cracked dll u need if u want to 'operate' tomtom thru TTHome

Somebody help me please?

I upgrade Nv 8300 to Nv 8310, BL 5.5105 is no change ( i wil up to 5.5112 ), but GPS from v1.21 down to v1.20.

yesterday today
Nv 8300 8310
BL 5.5105 5.5105
GPS v1.21 v1.20

Somebody help me please?

I upgrade Nv 8300 to Nv 8310, BL 5.5105 is no change ( i wil up to 5.5112 ), but GPS from v1.21 down to v1.20.

yesterday today
Nv 8300 8310
BL 5.5105 5.5105
GPS v1.21 v1.20

What's the problem??
Has it stopped working??
You may find it is App / Map / Device specific, not B/L related.

Here's a few numbers from recent screenshots
Same device, diff Apps..ie..
520/7.221/BL5.5012/GPS1.21 - Int
520/7.481/BL5.5012/GPS1.21 - Int
520/8.070/BL5.5012/GPS1.21 - SDHC
520/8.300/BL5.5012/GPS1.20 - Int

& my current 2 system setup after B/L upgrade
520/8.070/BL5.5019/GPS1.21 - SDHC
520/8.300/BL5.5019/GPS1.20 - Int

Interested to find out what device you use...

my device is ONE XL HDT with 4GB SDHC. All working fine, only BL, how can i upgrade it to 5.5112?

my device is ONE XL HDT with 4GB SDHC. All working fine, only BL, how can i upgrade it to 5.5112?
:confused: If its all working fine,why on earth do you want to change the boot loader? I suggest you have a good read of the following thread:
http://www.ipmart-forum.com/showthread.php?t=328398 the implications of changing boots are discussed at length in there....:suicide:

:ilove:

just in case those dont have jdownloader for the DLC file here are the extracted files from the DLC 8310.9760

8310
http://rapidshare.com/files/193617912/8310_9760.part1.rar
http://rapidshare.com/files/193617914/8310_9760.part2.rar
http://rapidshare.com/files/193617915/8310_9760.part3.rar
http://rapidshare.com/files/193617916/8310_9760.part4.rar

yep works good on my 720 as well along with the 55112 boot loader

1) In this Navcore archive I have 2 bootloader files: "system5.5112" and "system5.5022",

For now, I put both in my system, am I right ? (I can read in info: "bootloader 5.5022"). Do I have to choose only one file ?

2) Can I use this NC on my 730 ? I tried but it seems a little buggy (position is often lost)

3) If I want to go back and re-install 8300.9732, can I do it ? can replace the 2 bootloader files wit the old ones (system5.5022 and system5.5106) ?

4) 8.310.9760 SE Variant can't see my Iphone via bluetooth ! why ?

thx a lot

1) In this Navcore archive I have 2 bootloader files: "system5.5112" and "system5.5022",

For now, I put both in my system, am I right ? (I can read in info: "bootloader 5.5022"). Do I have to choose only one file ?


3) If I want to go back and re-install 8300.9732, can I do it ? can replace the 2 bootloader files wit the old ones (system5.5022 and system5.5106) ?

SE navcores may contain more than 1 system file so that you can use which ever one of them you want to ,or you can retain your existing one and use that instead. Adding them to your device ,like you have done, with the number included in their name (eg:system5.5106) means they will just sit on your tomtom doing nothing...its only when you opt to rename them to "system" without the numbers that they become your new bootloader....REMEMBER...once you change to a newer bootloader you can NEVER change it back to what it was before...the best way to check what bootloader is currently active is by reading your ttgo.bif file....
If you want to change your navcore back to 8.300 it can be done (in theory you should have a backup copy of it on your computer you can reinstall) or by removing the installed "application" using home then updating to get the latest official installed or if it doesn't offer it just download the cab file for it from one of BiggerDaves posts...

:ilove:

I have 720, and copied all the above files.. Most seem to work fine.. But, the unit is slow slowtimes in updating and voice... and especially when unplugged the unit from power its even super slow. Anything to check for?

SE navcores may contain more than 1 system file so that you can use which ever one of them you want to ,or you can retain your existing one and use that instead. Adding them to your device ,like you have done, with the number included in their name (eg:system5.5106) means they will just sit on your tomtom doing nothing...its only when you opt to rename them to "system" without the numbers that they become your new bootloader....REMEMBER...once you change to a newer bootloader you can NEVER change it back to what it was before...the best way to check what bootloader is currently active is by reading your ttgo.bif file....
If you want to change your navcore back to 8.300 it can be done (in theory you should have a backup copy of it on your computer you can reinstall) or by removing the installed "application" using home then updating to get the latest official installed or if it doesn't offer it just download the cab file for it from one of BiggerDaves posts...

:ilove:

Thank you very much for your answer. I've been trying to understand all about Tomtom since a while but there are so many things still don't get !
I'm not that good in technology !!

1) For ex I'm still working on "switchfiles" which are the most difficult part I think ! I'm using this 8.310 NC but what switchfiles do I need if I want to get the last 740 Navcore on my 730 ? To emulate a 740 on my 730 ?


2)I also used to understand dll/ttgo.bif trick (thx to active posters here) but I'm unable to redo it with this 8.310 NC...can't get mapshare and ephemeris update anymore. I put the cracked dll folder in right place and took my original ttgo.bif file, replacing version numbers on it. Am I right ?

:thanks:

Even I donot understand the switchfiles and ttgo.bif concept. Pls explain. Thanks.

I might have come across a little bug in 8.310, at least with my GO730.

Create a route from anywhere to your home location. No matter if 'fastet', "shortest" etc .....

When the calculated route is shown, choose "Alternative Route".
Then I don't get a real alternative, just a 400m long path on my home street.

With 8.204 it's working well. Can anyone reproduce this ?

Kroke

Hi people I am new here, i got the 8.310 working on my 730 just fine but i have found a little bug:
If you want to use earphones or an audio cable in this version (first you have to go in preferences, then speaker preferences and set output to "Line-out (audio cable)") and you plug them in it does not work:
8.310 just keeps sending out voice to the speaker, not to the earphones/audio cable! Try it yourself. It is a bug of the original 8.310 or is just in this Variant version?

thanks everyone for help especially TTuser

@Kroke it does not happen on my go730 i choose find alternative and then calculate alternative and it does find other routes. Maybe your route it is so short that there are not alternatives?

Ok I have edited cause I have found that the line-out stuff is a bug! (i still do not know if is a variant's or original x40 version's problem). Affects not only 730: look here (http://www.ipmart-forum.com/showthread.php?t=329223&highlight=Line-out+%28audio+cable%29), for lazy ones just this. (http://www.ipmart-forum.com/showpost.php?p=2502939&postcount=4)
There is a possible solution if you just want to listen to music and it is in the same thread here (http://www.ipmart-forum.com/showpost.php?p=2503253&postcount=8) (anyway I had already found it by myself, the problem is that I would like to listen to the instructions, not the music... so not a solution for me)

TTuser I need your help please, do you have any idea how to make it work?

hi i have a tomtom 920t with navcore 8.310.. I'm having issue with my bluetooth connection, everytime i connect via bluetooth to play mp3 (songs).... my tomtom would turn off my bluetooth device(my ear phone, bluetooth or receiver for my radio) after 5 to 15 minutes... i tried changing back to navcore 7.10 which was my original and the same thing happen.. i tried other navcore as well like 8.203 or 8.310 the same problem...

does anyone body know why or any fix to this problem...

I have tomtom 930 and I installed navcore8.310.9760 and FM transmission is not working. How can I repair this on my 930 ?

You have installed the original or modified se-version?
In the second case try to use the "fmon" switch

Bye

I installed modified SE version

OK..try the "fmon" switch, how explained in the readmenot.txt file inside the se version file you downloaded.

However the last official (and se_version) navcore for your TT is the 8.301 one.
If the 8.310 is still not working...try the 8.301....

Bye

OK..try the "fmon" switch, how explained in the readmenot.txt file inside the se version file you downloaded.

However the last official (and se_version) navcore for your TT is the 8.301 one.
If the 8.310 is still not working...try the 8.301....

Bye

Hi!
Maybe enny news for GO910? Dos someone got it working?

Hello,

RDS-TMC is not working on my GO-710, NV 8310.9760 with WCE 815.2003, bootloader 5.5112.

When I connected my RDS-TMC it always searching signals but never gets info.

Can someone help me to tell if it is working with this NV and WCE version on GO-710.

:thanks:

:ilove:

of course works it or you would read in 1 post from it:hehe:

Hello TTuser,

:urtheman: Thanks for making all possible for us.

Everything work like a charm even light sensor. But TMC is searching signal and it does not get traffic info. Am in missing something specially make it work? I tried on 300KM route.

Should I adjust manually frequency to make it work or it does Automatically.

Thanks again for helping me out.

:ilove:

which antenna version have you
you need possible to unplug an plug antenna again
check also have you the right mctx.dat etc. files
you have possible also see that it already begin to search if you only stuck to the mounter without antenna because a new mounter with inbuilt antenna exist for the x40, the previous situation with other versions with the Errormessage was better, ok enough have whine about it, now start it always tmcserver also without antenna, is of course better now:suicide:

Yes I tried sevral times. How should I see if I have the right mctx.dat etc files. In my mctx.txt following is written,

In France using ViaMichelin
In UK using ITIS
In Finland using Destia
In Italy using Infoblu
In Germany using TMCPro
In Sydney, New South Wales, Australia using Intelematics
In Melbourne, Victoria, Australia using Intelematics
In Brisbane, Queensland, Australia using Intelematics

My mctx.dat file is 52 bytes in size.

I tried to run this version on a TT One V2, but without success (the same happens with the 8.301 version). It hangs when you touch the navigation screen. When pressing the the bottom bar to increase the volume or see the version etc it works fine, but when you actually want to plan a route it hangs. The zoom in and out buttons are just small white squares.

The log file gives an error in the /bin/ttn file located in the outsourced map. If I remove this file or the whole folder it still hangs after pressing the navigation screen to plan a route.
TTuser do you have any idea or do you need the whole error log file for this? Or am I just asking a stupid question?

Does bluetooth hands free work in this version? Would like to load it onto my Go500 but I need the bluetooth to work.

Keep up the good work guys :yourock:

if ur go500 support bluetooth hardware than i will work on ur go bcz i have go520 and bluetooth working fine on mine :)

I have problem with delete Favorites (Bookmarks). Have any idea for this?

For deleting favorites use the switch bton, that will probably do the trick.

Switch bton? I not understand. Write me please more how. In switches I not see any switch for delete bookmarks. Thanks for help.

TTuser already mentioned earlier that if you want to delete favorites you have to use the switchfile bton:

delete Favorite works only with switchfile BTON

So the switch you have to use is "bton" and then you can delete you favorites. This is a strange thing of course, because bton is not ment for this, but it seems to be interconnected to eachother.

OK, thanks. This work and favorites are deleted :-) Thanks

Hi! did someone find a solution for the line-out bug (here (http://www.ipmart-forum.com/showpost.php?p=2518340&postcount=169))?

I would really love to find a solution for this. I use the headphones a lot since most of the time i use tomtom on my scooter (in my backpack) and the only way to listen to the instructions are the headphones...

@ TTuser: maybe the bug should be added to the "Known Errors" list in the first post of this thread? (if there is no solution obviously :D). however variant it's still a great release.:thanks:

Any working dump for TTOne v.2?
Still freezes here...
Thank you..

It's just a miracle that v8204 works greatly with ONEs with only 32 Mb of ram....(in fact loquendo doesn't work!)
Double miracle for 8.310!!!
But we are great-faith men!

E' gia' un miracolo che un tomtom ONE con solo 32mb di ram funzioni con la v8204...(infatti il loquendo non va)
Sarebbe un miracolo doppio se ci funzionasse pure la v8310!
Ma noi siamo uomini con una grande fede!

Bye

hello!

First I deleted all files an the 910.
then I copied the Basicpack+ SE_ttsystem.8.310.9760.rar to the TomTom Drive
next ASR
next the SE_ttsystem_8.310.9760 files to TomTom

when I start the TomTom the TomTom Logo Start Screen appear, but no application is coming ?

TT910

have I forgot any steps?

First you should NOT have deleted all the content of your SD-card, but just have copied the content of the rar files over it.
I think you do either things twice or I miss understand because of your unclear way of writing, but you should now:
- Download and unpack the .cab file from TomTom 8.310 (to copy the some content back to your SD-card)
- Unpack and copy the content of the basicpack8.310 to your SD-card (not really needed, just to be sure you have the right configuration)
- unpack and copy the content of the SE-ttsystem8.310 to your sd-card.
Always select overwrite.

Set up a /Config folder as indicated in the readmenot.txt by upacking the switchfile.rar located in the rar SE_system file.

That should work. At last it does for everybody else.

hello!

I restored my last backup to my 910 - it started with the "old" version - it works
- then I unpacked and copied the content of the basicpack8.310 to my 910.
- I unpacked and copied the content of the SE-ttsystem8.310 to my 910
- I extraced the switchfile.rar to /config

when I start the 910 yet the first tomtom logo appers after about 3 seconds the startscreen logo apperas but this startscreen logo freezes?? :afraid:

Thx

works fine now on 920

cryptload works okay
thanks :egdance:

hi! in this way works fine but where are spoken adress? i dont see it!
i have a 920

hi! in this way works fine but where are spoken adress? i dont see it!
i have a 920

.. have go920 too and spoken address doesn't working :(
TT says something like : 'speech recognition files not installed'
..but voice command are working
..what's wrong ?
..TTUser help us please :)

.. have go920 too and spoken address doesn't working :(
TT says something like : 'speech recognition files not installed'
..but voice command are working
..what's wrong ?
..TTUser help us please :)

you must download cab 940 from ttuser
you must download the 2 links from the 16th reply(2nd page user 8kookoo) of this thread.
than delete all files in your 920. except the map, voices and art.
copy cab 940. copy ttsystem you downloaded from the first link of 8kookoo.
reboot
than reset under the gps
copy ASR from thesecond link 8kookoo.
reboot
spoken adress is ok. voices ok.
scuse me for my english

The thing i don.t understand is why EPT on my 930 is not working with this navcore that is original from the 940 who has that option too?

Did someone tried this version with HD ?

The thing i don.t understand is why EPT on my 930 is not working with this navcore that is original from the 940 who has that option too?

Auto Dim and auto night mode also not working..

Did someone tried this version with HD ?



http://tinyurl.com/bech9thttp://tinyurl.com/bech9thttp://tinyurl.com/bech9thttp://tinyurl.com/bech9thttp://tinyurl.com/bech9t
http://i3.photobucket.com/albums/y93/ChillyCatz/newspaper-generator.jpg

:wrong::holdit::rofl:

Thanks TTUser!

This is my first time installing a new navcore I am experiencing a sound issue with my Go 720. The sound will stop working unpredictably.

I have tried installing the voices from this link:
http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111
but this has not fixed the problem.

I have noticed other Go 720 users have not reported this problem, any suggestions anyone?

Also I have not installed the setmodel.txt or the Config folder because when I put either of these on my 720 it caused the TT to freeze. I do not know if this is related to the sound issue, or if the TT should even be able to work without these files. It does work without them though.

you must download cab 940 from ttuser
you must download the 2 links from the 16th reply(2nd page user 8kookoo) of this thread.
than delete all files in your 920. except the map, voices and art.
copy cab 940. copy ttsystem you downloaded from the first link of 8kookoo.
reboot
than reset under the gps
copy ASR from thesecond link 8kookoo.
reboot
spoken adress is ok. voices ok.
scuse me for my english

well... still doesn't working :)
but voice commands are ok ... strange

hi all,

i have a TTGo 710, and i am using this navcore - it all works fine except i cannot get it to run in x30 emulation mode - i get corrupted gfx and when i select the screen for the main menu - the TT just freezes.

In x40 emu mode everything is fine and working. I am using 815.2096 map - and currently looking at getting the 815.2003 maps (for IQ / ALG etc)

i would really like it to run in x30 mode, but cannot figure it out as to why it wont work.

Any ideas would be appreciated - oh and BIIGGGGG thanks to TTUSER for the marvelous work!

well, x30 emu doesn't working on go920 too ..maybe next TTUser's version of 8.310 will fix this 'bug' (?)

..OMG :) wasn't any bug just had maps v.815.2024 installed on my go920,
they are WITHOUT speech recognition files :)

hmm..could someone please confirm that this navcore along with uk 8.15.2003 map will work on a tomtom one xl ? and will IQ2 route work as well ?

hmm..could someone please confirm that this navcore along with uk 8.15.2003 map will work on a tomtom one xl ? and will IQ2 route work as well ?

http://www.ipmart-forum.com/showpost.php?p=2468415&postcount=1382

http://www.ipmart-forum.com/showpost.php?p=2468415&postcount=1382

hm so will it work on one xl ?

i don't know why people ask this question it will work??? why thay r not intall application frist if thay have any prob than ask in forum .if it is not work than backup ur old application .it is not a difficult task guys .

i don't know why people ask this question it will work??? why thay r not intall application frist if thay have any prob than ask in forum .if it is not work than backup ur old application .it is not a difficult task guys .

E X A C T L Y !!!!!!!!!!!!!!!!!!!

1. make a backup of your device

2. read all the instuctions here

3. give it a go "at least try"

4. if it fails? go to no#1

5. if it works? :egdance:

Thank you very much for your answer. I've been <SNIP>

2)I also used to understand dll/ttgo.bif trick (thx to active posters here) but I'm unable to redo it with this 8.310 NC...can't get mapshare and ephemeris update anymore. I put the cracked dll folder in right place and took my original ttgo.bif file, replacing version numbers on it. Am I right ?

:thanks:

Did anyone answer this for you?

Here's what I've got for my 910 when I'm connected to PC...

version.txt (which triggers a backup job when you start TomTom to create each of the files below)
A:7903
B:9183

The specific contents needed for your go are in the readme for the ttsystem.

ttgo.bif (active bif)
ApplicationVersionVersionNumber=8204
ApplicationVersion=9718

ttori.bif (which restores to tomtom when you run disconnected from pc)
ApplicationVersionVersionNumber=8204
ApplicationVersion=9718

ttbak.bif (restored when you are connected to PC)
ApplicationVersionVersionNumber=7903
ApplicationVersion=9183

Updating:
I've noticed I need to sometimes overwrite ttgo.bif with no TomTom home running at all before I can run it. Update complains about wrong version, but Okay continues.
ApplicationVersionVersionNumber=8204
ApplicationVersion=9718

Using tomtom on PC
overwrite ttgo.bif with
ApplicationVersionVersionNumber=7903
ApplicationVersion=9183

There's an update which makes this NavCore work for TToneV2, etc., probably all devices which hanged when pressing the navigation screen.
Here is the link, download with IE and rename to .zip and copy and select overwrite contents of the zip file to your SD-card:
http://download.tomtom.com/sweet/plugin/8-310-9760-1.win.2.2.xpi
(if you try to download it with firefox it ask if you want to install it, because .xpi files are usually extension for firefox, so therefore it is easier to use Internet Explorer).

So far I tried:
X40: hangs on pressing navigation screen, zoom in, out and other buttons aren't properly shown as well (looks similar as without using these files and starting up, but there is some difference).
X30: works just fine
X20: works just fine
(Loquendo is NOT working on my TToneV2 (of course..), VocalizerTTS is working.
ALG button in menu is not visable, however you can turn it on/off by pressing the appearntly white image(??) with Advanced Lane Guidance Switch on/off diaplyed below it.
It is strange that x40 emulation is not working actually. If anybody can give a hint...

I wonder how many people are using x40 emulation here on a none x40 device and for whom it works well with this navcore version of course.

I forgot to refer to Nicole1200, whom has found this out for the 8.300SE version ( http://www.ipmart-forum.com/showpost.php?p=2363890&postcount=126 ), I just copied what he did, but then changed the version numbers. So he deserves the credit.

Hi all

I'm another one having some headakes with a GO 910 and this Navcore 8.310.9760
This afternoon upgraded with SE versions:
two One's V3 with 8.204, no problems;
one OneXL with 8.204, no problems;
two GO720 with 8.310.9760, no problems

This GO910 freezes in the splash screen. Still have no clue what it is after reading all 22 pages in this thread. But saw a couple of users with the same problem with 910's
Here is what i'm doing:

Internal memory clean
Extracted 8.310.9760 SE Basic Pack and Ttsystem to root
ASR, Voices and maps to root
Created "config" folder and model.txt with "x30" ( also tried with x40 )

Always freezes on splash screen and a reset is needed. The same process on the 720's worked flawless. Can some one shed some light?????

PS: 8.204 works perfect.

someone tried it on one v3??

tnx

@ironia just download the package I gave the link to above. I am sure it will work in x30 or x20 emulation. I will try maybe tonight and see if I can get it to work in x40 emulation by comparing the basicpack files from TTuser with this strange package provided by TomTom itself.

As usual great work done by TTuser and others, 310 works fine with a Go720, not too sure at thise stage of any advantages over 204.

Cheers

How do i install Navcore 8.310.9760 SE Variant on my TT GO 720?
Can someone tell me step by step?
:thanks:

@timmi2

Read here:
http://www.ipmart-forum.com/showpost.php?p=2379670&postcount=19

For deleting favorites use the switch bton, that will probably do the trick.
Where do i put the "bton" switch. Which file?

"Yes I tried sevral times. How should I see if I have the right mctx.dat etc files. In my mctx.txt following is written,

In France using ViaMichelin
In UK using ITIS
In Finland using Destia
In Italy using Infoblu
In Germany using TMCPro
In Sydney, New South Wales, Australia using Intelematics
In Melbourne, Victoria, Australia using Intelematics
In Brisbane, Queensland, Australia using Intelematics

My mctx.dat file is 52 bytes in size."

-----------------------------------------------------

The Navcore works on my go910
:dance:

and it works with the x10 voice files
:ilove:

and

TTUser, Thanks

But i have a question yousing TMC because it doesent work on my go.
i have the file mctx.dat but i dont have the mctx.txt file.
i even cant oben in the menu, 3 from 3, TomTom Traffic
this means i have no chance to change the country: Germany, Switzerland, etc. and i cant change manual setting of a FM frequenz or let this do my go.
Does anybody have a go910 and a solution for this problem?

Nomos

"But i have a question yousing TMC because it doesent work on my go."#

Do you have the updated arial, with the bigger black dongle at the tomtom end of the aerial? If yes, see below. If your dongle is at the tip of the aerial, send it back and get the upgraded one - those ones never worked properly.

If your black dongle is nearest the tomtom end, then are you using the tomtom from battery or powered cradle?

8.2 and 8.3 official TMC RDS are powered and I noticed that there's a software check before tomtom even looks for the existance of an aerial.

Plug it in and then it might still say that not supported on this version, but ignore that and a few mins later should work fine.

My TMC RDS was extremely hit and miss with the 8.3 navcore. It would only work about 30% of the time when device was switched on and could take up to 30 mins to be recognised. I have not had one problem since using 8.4 navcore

Thanks for the answers

I am using the old TMC Antenna
my go is instald with this solutions:

http://www.ge-tectronic.de/upload/1196923159_TMC%20Y-Adapter_Verstaerker.pdf

http://www.ge-tectronic.de/upload/Umbau%20TomTom%20TMC-Receiver.pdf

With the original x10 Navcore TMC works fine
But with the Navcore 8.310 my go works extrem fine but i have no TMC
I seems that my go doesnt find a radio broadcasting station.
I cant change the countrys anymore

The problem with 8.410 is that i cant use the x10 voices
I can only use 8.410 with the x30 voices

Because 8.310 works so fine on my go910 i would like to leave it on my go!
But I need TMC

For the people that wont to install a CF Card in a go910,
Manual Link:

http://remixshare.com/?file=jppaxtcexi

Password is: navcore

Nomos

Hi

does anybody no,
for what the file:
tmcevents.dat
is in the Outsourced directory?

Thanks

@Nomos Try this file:
http://download.tomtom.com/sweet/internal_file/partialupdate/70002.2.mctx-dat.high-end.Aug08.cab
or take other mctx.dat files especially from the NavCore version which made your TMC antenne work fine. That should solve your problem.

@ vincentn1981

Thanks

I will try it

Nomos

thanks you is good for my go 930t?

Hi,
I am new to all of this Navcore, Maps upgrades. I read through many of the tutorials on this forum, but I am confused as to what I should do in my situation. Any help is grateful. Here is my situation:
1) I bought a GO720
2) I use NAVCORE 8.204 9718 from a 940 system (http://www.ipmart-forum.com/showthread.php?t=323259)
3) I use NA MAP 815.2019

What I would 'like' is to update the NAVCORE, but still remain with a 940 system AND update the map. Can someone please give me a 'dummy' step by step method to doing this. Any help would be grateful. Please be patient with me.

Hi,
I am new to all of this Navcore, Maps upgrades. I read through many of the tutorials on this forum, but I am confused as to what I should do in my situation. Any help is grateful. Here is my situation:
1) I bought a GO720
2) I use NAVCORE 8.204 9718 from a 940 system (http://www.ipmart-forum.com/showthread.php?t=323259)
3) I use NA MAP 815.2019

What I would 'like' is to update the NAVCORE, but still remain with a 940 system AND update the map. Can someone please give me a 'dummy' step by step method to doing this. Any help would be grateful. Please be patient with me.

It's all here: http://www.ipmart-forum.com/forumdisplay.php?f=775