Known Errors (Experiences valid for my 710):
old Remote still dead (this mean the "NOT BT" Remote);
no "poweroff" more possible (the angry Watchdog barks always and the Device wake up again);
x40 Emu. 0% Brightness is total dark


ASR Folder for Voice Input can you use one from 8.2, 8.3

all additional SE Features, Function, Use similar as already known, read readme for exact Infos

Changelog:
30.03. rev1.2 try to fix always started TMC, try to reduce screenflicker, switch on with switch "reduceflicker"

10.03. now again a basicpack + single ttsystem or i goes crazy with uploading always all new
again inbuilt "Solution" for x00 GPS Prob
x40light changed a little, heard this works better, old x40light now under x40light2 available

SE_Navcore.8.410.1218.Basicpack.rar (http://rapidshare.com/files/207488048/SE_Navcore.8.410.1218.Basicpack.rar)
SE_ttsystem.8.410.1218.rar (http://rapidshare.com/files/207493352/SE_ttsystem.8.410.1218.rar)
SE_ttsystem.8.410.1218.rev.1.2.rar (http://rapidshare.com/files/215275254/SE_ttsystem.8.410.1218.rev.1.2.rar)

original cabs
8.410.one2009_plus_2048.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.one2009_plus_2048.CAB-navcore-PLF.cab)
8.410.one2009_plus_2048_tts.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.one2009_plus_2048_tts.CAB-navcore-PLF.cab)
8.410.xl2009_plus_2048.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.xl2009_plus_2048.CAB-navcore-PLF.cab)
8.410.xl2009_plus_2048_tts.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.xl2009_plus_2048_tts.CAB-navcore-PLF.cab)

Great to see new development. However, I just checked the TomTom website,
and no mentioning of 8.410. What is it, and where can I get it?

:thanks:

Great to see new development. However, I just checked the TomTom website,
and no mentioning of 8.410. What is it, and where can I get it?

:thanks:
see the post above yours.
and thanks to TTuser:good2:

Thanks TTuser you're the best!

Thanx, TTUser. Great work as always!!!

:urtheman:

For wich device is this originally?

dose it work on go 910 thank you ttuser

dose it work on go 910 thank you ttuser

It hangs at startup for GO 910.
Any solution for this?

PS: 8.204 continues been the best for GO 910. Also 8.302 is working but no voice commands there.

Thanks for your work and time TTUSER.
:urtheman:

It hangs at startup for GO 910.
Any solution for this?

Thanks for your work and time TTUSER.
:urtheman:


Hangs on my GO 910 too. Thanks TTUSER for your great effort! :good2: I hope you can fix this issue for us 910 users :)

ps. I did a clean install on my GO 910 - so no leftovers from previous versions!

How do we emulate x40 on 720?

How do we emulate x40 on 720?

Do nothing. It defaults to x40.

x40light emu does not work on my 920 (stuck on boot screen). Is it suppose to? Or is it for a different device?

For wich device is this originally?


dose it work on go 910 thank you ttuser


:punish::punish: R E A D :punish::punish:



Ask not from / for which Devices it is, important is x40 Emu works ok

on 920 all works fine

Thanks TTuser for this new release of your SE version

:punish::punish: R E A D :punish::punish:

My mistake. should not do this with alcohol in my body.

x40light emu does not work on my 920 (stuck on boot screen). Is it suppose to? Or is it for a different device?

does'nt work here too
bust its x40 emulation
use the original and it work but not the new icons whit x20 mode

does'nt work here too
bust its x40 emulation
use the original and it work but not the new icons whit x20 mode

If you are referring to auto night/dim, it has never functioned using any x40 Navcore with x40 emu on a lesser device. I voice command my 720 to night view/day view.

It hangs at startup screen for my GO 910.

works perfect on Rider2 - thanks TTUser

This navcore has improved the speed of calculating routes. When you calculate a new route, it first calculates the route then loads the map. Before it would do these two things together.

works on my 720 with NA maps 2019
MIRROR of TTUSERS file if needed 8410.1218
.
.
http://rapidshare.com/files/206587229/SE_Navcore.8.410.1218.rar

and if you happen to see the X30 ICONs then go and change your MODEL.TXT file in the CONFIG folder and make sure you have X40 in it.

It hangs at startup screen for my GO 910.

http://www.2shared.com/file/5025293/7f818d4f/ttsystem8410.html

works on my 720 with NA maps 2019
MIRROR of TTUSERS file if needed 8410.1218
.
.
http://rapidshare.com/files/206587229/SE_Navcore.8.410.1218.rar

and if you happen to see the X30 ICONs then go and change your MODEL.TXT file in the CONFIG folder and make sure you have X40 in it.

You don't need the config folder in a 720.

works on my 720 with NA maps 2019
.


Hey buercky !!

Got myself a 720 as well and currently 8.302/825.2157.
Exactly what kinda neat benifits ya seeing with this new navcore ??
Can you highlight the various features & benifits of this 8.410.1218

And, would it be too much to ask for some screenshots ?? Folks would prolly like to see sum new eye-candy

http://www.2shared.com/file/5025293/7f818d4f/ttsystem8410.html


@ masahi,
Don't know how you did it but it works now on my GO910.
Thanks,
Left Karma
:urtheman:

@ masahi,
Don't know how you did it but it works now on my GO910.
Thanks,
Left Karma
:urtheman:

dsa8310 created this ttsystem file to work with 910s and posted it on another forum.
It appears masahi copied it and posted it here.

dsa8310 created this ttsystem file to work with 910s and posted it on another forum.
It appears masahi copied it and posted it here.

Thats right! Thanks go to dsa8310 on GPS forum.I just wanted to help and gave the link.

work corectly this navcore in 930 ? meny fnx.

HI,
Voice Control is working perfectly on GO910.
Just needed to have a "base" with a working system on 8.204 and copied Nav Core 8.410 from TTuser.

Hey buercky !!

Got myself a 720 as well and currently 8.302/825.2157.
Exactly what kinda neat benifits ya seeing with this new navcore ??
Can you highlight the various features & benifits of this 8.410.1218

And, would it be too much to ask for some screenshots ?? Folks would prolly like to see sum new eye-candy

One difference I see, route building is quicker. It now builds the route before it displays it. Previously it did them both at the same time. It seems the computer voices are enunciating better. Over all operation seems faster. I don't see any menu changes/ new eye candy.

Thats right! Thanks go to dsa8310 on GPS forum.I just wanted to help and gave the link.

That would be GSM Forum. No problem with wanting to help, but always give proper credit!!!!!

its look fine on my go520 but one thing when i go to voice command he can't understand what i m saying i say london it repeat brightness down lol when i will go on drive tommrow than i see how its work .thanx ttuser

work corectly this navcore in 930 ? meny fnx.

Yes, it will function on your 930.

HI,
Voice Control is not working on GO910.

Go to Change preferences, Voice Control preferences (page 4). If it is ON, you will see "Disable Voice Control" with a red & white X in the upper right corner.

Originally Posted by masahi
http://www.2shared.com/file/5025293/...ystem8410.html

this site not working

Originally Posted by masahi
http://www.2shared.com/file/5025293/...ystem8410.html

this site not working

try this one http://dox.bg/files/dw?a=ca866bb04e

Originally Posted by masahi
http://www.2shared.com/file/5025293/...ystem8410.html

this site not working

Not a problem. dsa8310 has updated it and reuploaded it.

http://www.2shared.com/file/5026199/8fa775e6/ttsystem8410.html

Here ya go.

try this one http://dox.bg/files/dw?a=ca866bb04e

You might wish to delete your link, since the file has been updated & reuploaded.

i have a 520 running this navcore fine, can u get the live services on this or do you have to have the x40 model to get that, if not, how good is the normal traffic service used via your mobile phone, as i had the reciever but it was absolute rubbish at connecting or finding a signal??

to lads with go920 : is GPRS workin ?

i have a 520 running this navcore fine, can u get the live services on this or do you have to have the x40 model to get that, if not, how good is the normal traffic service used via your mobile phone, as i had the reciever but it was absolute rubbish at connecting or finding a signal??

Live services are only available in Europe at this time. Coming to the US later this spring. Live services require a gprs receiver. The x40 series has one built in. Most of the services are subscription. If you are still interested, there is a vehicle power cable that has a built in gprs receiver.

im in the uk, so live services are available, if i get this power cable with the reciever in it, even tho i have a 520 and not a x40 model?

if so can u point me in the right direction to finding this cable?

using this cable means i dont need to use my phone?

Great! This one is indeed working on a GO910. I only ask myselve where this navcore is coming from. I have serious doubts whether this one will be officially released in Europe. Only the chinese and other foreign navcores have a PNDNavigator in them...

Big applause to the person who was able to crack this ttsystem to make it work on a GO910. This guy should get the title "The Master" same like TTuser. Those 2 guys together can make everything work I believe.

Thanks a lot! Gr Tjilitjap :ilove:

have a look at this one, you may be find it cheaper somewhere

http://cgi.ebay.co.uk/TomTom-RDS-TMC-Traffic-Receiver-GO-520-530-730-720-ONE_W0QQitemZ370165200969QQcmdZViewItemQQptZUK_CE_ GPS_Accessories_Software_ET?hash=item370165200969&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

Hello all,
I try to get the ttsystem for GO 910 but I don't succeed.
Can anyone have a working link to get this module?
Thank's in advance.

i got one of them but i really struggle to get any signal from it, rarely get the green circle in the corner, and the traffic warnings it does give me are far to late, as im stuck in the traffic!

Hello all,
I try to get the ttsystem for GO 910 but I don't succeed.
Can anyone have a working link to get this module?
Thank's in advance.

Go to my post #37. It is a good link.

Thanks, this is working great on my TTOne V2! (4N00.004)

:dance:

Works on go910

:thanks:

and :ilove:

TMC i will try tomorow

I cant use the x10 voices, the Device does not start, ttserver vor x10 voices was on the go

x30 voices are working

This is until jet my only problem

:good2:

sorry for my English

@tendriver,
Finaly I succeeded to download the ttsysem module for GO 910 and staticaly every thing look good for the moment, I will try in real tomorow and see if it works.
The TOMPlayer does not work with this new version, there is a problem with reading movie, the sound is no longer in sync with the picture, and the playback is no more fluante....
So there is a problem so fare.
Thanks anyway for this ew version.

After installing the new core 8.410 my GO 910 freezes every time I dock it and it doesn't matter if its on the pc or in the car. It just freezes and reboots. If I don't dock it, it works just sweet but that also means I can't charge it in the car :(
I've tried to set the model to ori, X20, X30 and X40 but no difference.
I can't even go back to core 8.300 (did a complete reinstall and also used the TomTom Clear Flash tool). It still freezes when docked. Anyone have any ideas?
I also tried to remove the Outsourced.8410 folder but no luck.
Thx in advance!

im in the uk, so live services are available, if i get this power cable with the reciever in it, even tho i have a 520 and not a x40 model?

if so can u point me in the right direction to finding this cable?

using this cable means i dont need to use my phone?

Please see the next post!!

im in the uk, so live services are available, if i get this power cable with the reciever in it, even tho i have a 520 and not a x40 model?

if so can u point me in the right direction to finding this cable?

using this cable means i dont need to use my phone?

http://i291.photobucket.com/albums/ll300/terrytpot/HDReceiver.jpg


TomTom unveils new High Definition Traffic Receiver

~For the first time new and existing TomTom GO products become HD Traffic Ready~

Amsterdam, 3 March 2008 - TomTom, the world’s leading provider of navigation solutions, today announced the launch of the HD Traffic™ Receiver which will deliver TomTom’s advanced traffic information to existing and new TomTom customers. The HD Traffic Receiver has a built-in SIM card for GPRS connectivity and plugs into the vehicle’s cigarette lighter. Available as a stand-alone accessory, as well as being included in the box of selected models within the TomTom GO family, it comes with a six month subscription to the TomTom HD Traffic service.

Thanks to its unique approach of combining the best traffic data from multiple sources, TomTom HD Traffic allows users to easily plan the smartest route to their destination. With HD Traffic, users receive more traffic updates so that they are better informed about the traffic situation on their route, and receive more accurate travel and arrival times. In addition, HD Traffic covers more roads, so drivers know in advance that the alternative route they take is actually a smarter option, thus avoiding any unnecessary delays.

The HD Traffic information service is currently available in the Netherlands and is planned to be rolled out in Germany this year. The French service will be launched in 2009.

“For all drivers, avoiding traffic jams - before and during their journey - is crucial to getting to their destination,” said Harold Goddijn, chief executive officer, TomTom. “With the HD Traffic Receiver, now TomTom GO customers can benefit from our superior HD traffic information.”

The HD Traffic Receiver makes receiving traffic information very easy. Drivers simply insert one end into the mini-USB port of their TomTom device, and the other into the cigarette lighter adaptor of their car. The new TomTom HD Traffic Receiver features a GPRS modem and is powered by a 12-24 volt cigarette lighter adaptor. With a built in Lithium-ion battery, a weight of only 128 grams and measuring at 122 mm x 45 mm x 25 mm, the TomTom HD Traffic Receiver is completely portable.

Pricing & availability:
The existing TomTom products that the HD Traffic Receiver will be compatible with are:
• TomTom GO 930 (T)
• TomTom GO 730 (T)
• TomTom GO 530 (T)
• TomTom GO 920 (T)
• TomTom GO 720 (T)
• TomTom GO 520 (T)

The HD Traffic Receiver will be offered at a recommended retail price of Euro 99.95, including a six month HD Traffic subscription worth Euro 60. It will also be included with the new TomTom GO 730 HD Traffic and the new TomTom GO 930 HD Traffic.

The HD Traffic service is offered for an all-inclusive fixed fee. This features no hidden costs and the subscription can be easily renewed after its initial duration.

The HD Traffic Receiver will be made compatible with other TomTom products later this year through a software update, in all countries where HD Traffic is available.

For more information on TomTom HD Traffic, please visit: www.tomtom.com/hdtraffic

http://www.easydevices.co.uk/pp/TomTom_Accessories/GO_530_730_930/TOMTOM_HIGH_DEFINITION_HD_TRAFFIC_RECEIVER.html

I would do a lot of research before I bought one.

After installing the new core 8.410 my GO 910 freezes every time I dock it and it doesn't matter if its on the pc or in the car. It just freezes and reboots. If I don't dock it, it works just sweet but that also means I can't charge it in the car :(
I've tried to set the model to ori, X20, X30 and X40 but no difference.
I can't even go back to core 8.300 (did a complete reinstall and also used the TomTom Clear Flash tool). It still freezes when docked. Anyone have any ideas?
I also tried to remove the Outsourced.8410 folder but no luck.
Thx in advance!

Did you install the ttsystem file from my post 37 ?

Works very nicely. And purdy icons...


http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865592.jpg



This navcore has improved the speed of calculating routes.

It now builds the route before it displays it.

Yeah Guys, that's a nice feature. Should speed up things, especially those long multible city trips.


I voice command my 720 to night view/day view.

Hey 10..... your voice/Mic workin on this version ??

http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865597.jpg

My Mics all greyed out.


Sample of purdy "screen shots"

http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865593.jpg

http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865594.jpg

http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865595.jpg

http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865596.jpg


And..... operate my tomtom in home works after yDG patching

http://i3.photobucket.com/albums/y93/ChillyCatz/home.jpg

There is some new stuff now when you plan a route and browse the map, check it out :

http://img23.imageshack.us/img23/4314/dump1510149244.png

Also with this NavCore the Volume slider is different, after 60% volume the text is on the left and before 60% it switches to the right automatically.
:egdance:


Hey 10..... your voice/Mic workin on this version ??

http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865597.jpg

My Mics all greyed out.



In x40 Emu my mic is not grayed out like yours. It works perfectly. But I use x30 EMU because I want the auto brightness and the EPT.

There is some new stuff now when you plan a route and browse the map


http://i3.photobucket.com/albums/y93/ChillyCatz/dump1510149244.png

Whats those pink arrows pointing at , please ?

http://i3.photobucket.com/albums/y93/ChillyCatz/dump1510149244.png

Whats those pink arrows pointing at , please ?

thats the new feature.

When you press those buttons it either moves the map to your destination or to your home location automatically.

Try browsing the map and move it around you'll see those buttons show up.

thats the new feature.





Awesome. Thanks for such a prompt reply.

I read somewhere that in the US you need to select a State before you get the SR option is that right?

Works on TomTom One Version 3 without any modification, I turned on BT to get at the TomTom Speed Cameras. :thanks:

i check my go520 today its works fine .tmc working fine thanx ttuser.

found a working link

Thanks

The donwload link does not work.

Could someone put a new one.

Thanks in advance

:ilove:

TTuser has removed it. I'm sure he'll explain or repost soon.

its has been removed
i think TTuser have explination why
he ill explain soon

:thanks::thanks::thanks:

Thanks to TTuser and the person who made ttsystem for GO910
Voices x10: works :dance:

:urtheman::urtheman::urtheman:

Did you install the ttsystem file from my post 37 ?

I did - but no luck!
I remember that when I installd the 8.300 core, there was a bug concerning connecting TMC antenna showed up every time I docked the Go 910 (no matter if it was in the car or the pc). Pressing the OK button made the msg go away and the system worked just fine. I can't stop thinking if the problem is somwhat common here? The difference is just that the GO 910 freezes and reboots after a minutte instead of just displaying the message about the TMC antenna.

I don't know what to do :(

its has been removed
i think TTuser have explination why
he ill explain soon

I assume not TTUser removed them but RapidShare did.
But there are other links in this topic ;-)
TomTom One V2 works okay with this!

Correction.... This is weird, never seen this;
All I get on screen are plain pictures of the next crossings and turns.....
http://home.tiscali.nl/hdw04819/dump.jpg

like an old nav device....
Which setting causes this?

removed... (was just some BS)

Where can I download the original version of this Navcore?
hXXp://download.tomtom.com/sweet/navcore/8.410.????????????????????????????????

Thank you.

how come tomtom home detects the navcore as 8.300 not 8.4.

on go920 working well, but no luck with gprs :( doesn't working at all, mean forget about weather etc

I found one bug, when u search ur destionation in the address field says:
One moment please... and nothing hapens, i cant chooce my destination

I found one bug, when u search ur destionation in the address field says:
One moment please... and nothing hapens, i cant chooce my destination
..can you tell us which TT are you using please :)

Correction.... This is weird, never seen this;
All I get on screen are plain pictures of the next crossings and turns.....
http://home.tiscali.nl/hdw04819/dump.jpg

like an old nav device....
Which setting causes this?


in dutch : go in menu to "veiligheidsvoorkeuren" dan 4X ok dan bij "zet kaartweergave uit" nooit aanvinken en je probleem is verholpen

gr mz1

Thank you !!

BTW; I noticed DEMO route is gone in the menu. (yes show all menu items is activated)

=====

solved: this was caused by using x40light

..can you tell us which TT are you using please :)

Sorry about that, i'm using GO720

People with a TToneV2 should use the x40light emulation mode, this will enable you to use LoquendoTTS. Works great TTuser on my device, but you already knew that ;), with 8.25 maps also IQ-routes is working.

It seems that this navcore is for new models one.s.
On jouwnav.nl there are links to direct downloads and in every download the model one is mentioned.

Loquendo in TTOne ?? Doesn't the device become really slow then ?

thanks, works great with my GO 920T

Loquendo in TTOne ?? Doesn't the device become really slow then ?

who knows in a new model?

TTUser's link is back up. He re-uploaded it with a new ttsystem file.

Yes now you can see that in every download the one is mentioned.
Model 2009.

Hi, works EPT on TT920 ?

Regards
Samson

Hi, works EPT on TT920 ?

Regards
Samson

Yes it does if you use the X30 emulation.

[QUOTE=ChillyCat;2564355]
Hey 10..... your voice/Mic workin on this version ??


Yes it is. Go to Change preferences, Voice control preferences (page 4), an make sure it reads "Disable Voice Control" with a red & white X in the upper right corner. If it reads "Enable Voice Control" with a green & white check, then it is turned off.

With the new ttsystem of TTuser my GO910 : works:good2:
Thank TTuser
:urtheman::urtheman::urtheman:
grard31

@ sirko
all what u have to do is 'hard' reset of ur TT, mean pressing 'reset' button ...
had this same 'fault' on my go920 but after reset all working fine

i have put the navcore on my rider v2 look ok but it would not pare up with my head set keep thinking it a phone ?:oom:

Working great on 720. Like the new compass showing home on the browse map now.

I have a good feeling about this new navcore on my TTGO510-BL 5.5022:

- Even faster boot than previous one I had, 8.204 Rev.1.5
- Message of PC-Conection appears on screen again.
- Loquendo Voice doesn't seem as loud as before, or ... is it only in my imagination?

:thanks:TTuser

Works perfectly on ONE 1st edition with Loquendo, ALG and IQ - thanks TTUser

seems to work with full HDT on one XL HDT too. BNLX 825
Let you know what is the issue with draining battery like in 8204

works perfect on Rider2 - thanks TTUser

can you pare up your head set whit your phone ?

can you pare up your head set whit your phone ?

the original Rider scala headset don't work
I use the jabra headset (http://www.amazon.de/s/ref=nb_ss_w_2_9?__mk_de_DE=%C5M%C5Z%D5%D1&url=search-alias%3Daps&field-keywords=jabra+stereo+headset&sprefix=jabra+ste)- and this works fine

@TTUser

Thank you verymuch !

It is a very impressive Navcore:
Super fast boot, fast itinerary recovery, no more bug with the keyboard, installed with succes on my ONE v2 and on a ONE v1 with Western Europe 825.2157.

Splendid !

i see i have gone back to 7.09 navcore thank for all

08.03. new ttsystem

SE_Navcore.8.410.1218.rar (http://rapidshare.com/files/206737148/SE_Navcore.8.410.1218.rar)


original cabs
8.410.one2009_plus_2048.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.one2009_plus_2048.CAB-navcore-PLF.cab)
8.410.one2009_plus_2048_tts.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.one2009_plus_2048_tts.CAB-navcore-PLF.cab)
8.410.xl2009_plus_2048.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.xl2009_plus_2048.CAB-navcore-PLF.cab)
8.410.xl2009_plus_2048_tts.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.xl2009_plus_2048_tts.CAB-navcore-PLF.cab)


@TTUser,

please what's the difference between the original cabs (one, xl, tts...)?

And new boot v.5.5122 is good?

Thanks in advance

[quote=ChillyCat;2564355]


Go to Change preferences, Voice control preferences (page 4), an make sure it reads "Disable Voice Control" with a red & white X in the upper right corner. If it reads "Enable Voice Control" with a green & white check, then it is turned off.


http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865597.jpg

Above is page 4. Ya see ?? Grayed out. Ideas ?

[quote=tendriver;2565196]


http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865597.jpg

Above is page 4. Ya see ?? Grayed out. Ideas ?


Maybe no ASR folder?

CAPOLAVORO!!! +++
Congratulation again TTUSER, it works like a charm on a TTONE2!

Sorry for such a noob question, but what do I do different when installing this Navcore on a TTone 2nd edition compared to a TT720 ??

I have both Tomtoms and want to update them both, seems to be just install pretty straight forward on 720, not sure what to change for TTone 2nd.

Thanks for any help you can give :Love: :thanks:

[quote=tendriver;2565196]


http://i3.photobucket.com/albums/y93/ChillyCatz/dump2082865597.jpg

Above is page 4. Ya see ?? Grayed out. Ideas ?


Try replacing the ASR folder. If it works on my 920 it should work on your 720 as well.

Thanks for the great work TTUser! Tons of props to you.
Has anyone here with a TTOne that has installed this been able to get ALG to work? Show lane images appears to be grayed out in my preferences.
Thanks for any insight!

CAPOLAVORO!!! +++
Congratulation again TTUSER, it works like a charm on a TTONE2!



Do you have TTS working? I don't get any sound from Kate UK

Don't get Willem (Dutch) working either. Tried the big version 6.5 and the small version 6.5\both don't work. Neither in x40 nor in x40light

Chillicat,

Relace your LoquendoTTS with this one: http://www.ipmart-forum.com/attachme...5&d=1227044472

And put this file in root of your device: http://www.ipmart-forum.com/attachme...9&d=1227432495

Now Advanced Voice Control will be working IF you have emu x40, and you have ori ASR folder.

Gr Tjilitjap

[quote=ChillyCat;2565440]
Maybe no ASR folder?
Yup , I got ASR folder [ 19.5 MB ]

http://i3.photobucket.com/albums/y93/ChillyCatz/asr.jpg





[quote=ChillyCat;2565440]

Try replacing the ASR folder. If it works on my 920 it should work on your 720 as well.

You can see my ASR above. Replace my ASR folder with another.... i'm OK with that.
Where ya getting additional ASR folders from ? I got backup'd ASR's from previous installs.

Chillicat,

Relace your LoquendoTTS with this one: http://www.ipmart-forum.com/attachme...5&d=1227044472

And put this file in root of your device: http://www.ipmart-forum.com/attachme...9&d=1227432495

Now Advanced Voice Control will be working IF you have emu x40, and you have ori ASR folder.

Gr Tjilitjap


Copy and paste doesn't work in this forum it truncates (shortens) the links.

Loquendo TTS has nothing to do with Voice Recognition.

Chillicat,

Relace your LoquendoTTS with this one: http://www.ipmart-forum.com/attachme...5&d=1227044472

And put this file in root of your device: http://www.ipmart-forum.com/attachme...9&d=1227432495



Gr Tjilitjap


Thanks Tjilitjap .....

But, those links are down [as in , not working]

@Chillicat
You still have your support_asr.dat file in ASR folder don't you?

You still have your support_asr.dat file in ASR folder don't you?


Yes Sir

http://i3.photobucket.com/albums/y93/ChillyCatz/asr2.jpg

I'm hitting the couch to watch a lil NASCAR.... i'll check back laters
thanks, Guys

Chillicat,

Link 1: http://www.ipmart-forum.com/attachment.php?attachmentid=448965&d=1227044472

Link 2: http://www.ipmart-forum.com/attachment.php?attachmentid=450399&d=1227432495

This ones should be working....

OK grasping at straws now. Do you have the correct files in ASR for the State you are searching?

boot slower than 8.204 se

on one v3 regional

Do you use the BIG 6.5 loquendo files (+200MB) or the small ones (about 40MB) on your TTOne ?

please what's the difference between the original cabs (one, xl, tts...)?

And new boot v.5.5122 is good?

the answer is:
one is for the one without tts
one is for the one-xl with tts
one is for the one without tts
one is for the one-xl with tts

if you upgrade your boot, you never can go back. so try it without a new bootloader

is correct that ttsystem is detected as 5.5106??

This LoquendoTTS + folder suspend did the trick for me. I had exactly the same symptoms like Chillicat....

difference between 8.204 se and 8.410 se?

I give up (again) trying to get Loquendo to work on my TTOne V2.

Hopefully someone is willing to post a dump of his loquendo folder without voice, and tells me which voice version (6.5 or 6.9 - Big or Small ones) (s)he used

@tjilitjap

LoquendoTTS is for your DEVICE to give you information, street names etc.
ASR Speech Recognition is for YOU to instruct your device by your voice to do things like navigate to an address, etc.
That is why you can have TTS on a device without a microphone but you cannot have Speech Recognition if you don't have a mic. Well you could but it would be pointless.
Loquendo has NOTHING to do with Speech recognition.
Look at the map charts. It doesn't say TTS enabled as it is not a function of the map but it will say ASR enabled if the map has that facility like 825.2157

difference between 8.204 se and 8.410 se?

Easy. 0.206 :hehe::hehe::hehe:

Chillicat,

Relace your LoquendoTTS with this one: http://www.ipmart-forum.com/attachme...5&d=1227044472

And put this file in root of your device: http://www.ipmart-forum.com/attachme...9&d=1227432495

Now Advanced Voice Control will be working IF you have emu x40, and you have ori ASR folder.

Gr Tjilitjap

Both links are bad!!

rytenuff,

Without this LoquendoTTS folder I DID NOT have icon for speech control in menu, WITH Loquendo I DID have icon(quick menu icon) for speech control...

I am now not talking about when you go to adress en then you say "town"and "name of street" etc, for that function you need complete ASR. I am talking about telling the machine, dayview, nightview, etc. To get that icon on the map you will need LoquendoTTS. Excuse my english, I am Dutch...

ChillyCat,

FWIW, I had 8.310 on my 720. To upgrade to 8.410, I made a copy of my entire 720 root, excluding the map folder, then copied the 8.410 stuff into the device with an overwrite. If you wiped your device first, that could be your problem.

Tendriver, links from post 115 are working.

If you don't try, you won't know...

Gr Tjilitjap

Easy. 0.206 :hehe::hehe::hehe:

:shoutout::rofl:

Tendriver, links from post 115 are working.

If you don't try, you won't know...

Gr Tjilitjap

My bad. I was referring to your post 109. Your 115 links are indeed good.

Working great here on a One XL with 825.2157 maps and VocalizerTTS. Thanks! Seems faster than 8.204.9718 to me.

I am now not talking about when you go to adress en then you say "town"and "name of street" etc, for that function you need complete ASR. I am talking about telling the machine, dayview, nightview, etc. To get that icon on the map you will need LoquendoTTS. Excuse my english, I am Dutch...



I see now what you mean. You need a TTS voice so that the Speech Recognition can speak to you to ask for an input. Sorry I was on a different wavelength.

Working great here on a One XL with 825.2157 maps and VocalizerTTS. Thanks! Seems faster than 8.204.9718 to me.

and about the free ram???

tnx

@rytenuff - as far as I am aware, the Voice Input goes Beep when requiring Input but.....for some reason it wants a TTS voice available to work...

... working Kate and Susan just uploaded here :
http://www.filefactory.com/file/af4g0hg/n/LoquendoTTS_rar

Yes, see post 134. I was on a different track there (maybe a different planet) but the penny, or euro even, eventually dropped.

[LIST]



original cabs
8.410.one2009_plus_2048.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.one2009_plus_2048.CAB-navcore-PLF.cab)
8.410.one2009_plus_2048_tts.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.one2009_plus_2048_tts.CAB-navcore-PLF.cab)
8.410.xl2009_plus_2048.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.xl2009_plus_2048.CAB-navcore-PLF.cab)
8.410.xl2009_plus_2048_tts.CAB-navcore-PLF.cab (http://download.tomtom.com/sweet/navcore/8.410.xl2009_plus_2048_tts.CAB-navcore-PLF.cab)

so is possible that these rel will be an official release???

coming from the tomtom download server....you'd think so.

.....and so is possible that these are for ONE (normal, XL) only ?

That should mean that those new devices are getting the nice X40 menuicons.

home dll patch??

There is something strange happening when I operate my OneXL (original) through Home with SE 8.410.1218. Although while operating the PND on its own, the icons are consistent with the x40 emulation, I get a different emulation through TTHome (I think it is x20). With SE 8.204 the emulation was x40 on both.

Does anyone know why this is happening? I am missing a lot of options/icons through TTHome.

Thanks for your assistance, and again, thank you to TTUser for your amazing work.

home dll patch??


It's in TTUser's download package.

Does this version have all the new icons and options that the 8.204 version had?

Does this version have all the new icons and options that the 8.204 version had?

yes




:good2:

Got it working OK on a 710 - only niggle is that I have to accept the legal notice on every boot up, is that normal or any idea on a fix?

It's in TTUser's download package.

the .dlc'????

tnx

to lads with go920 : is GPRS workin ?

I put navcore on my SD card after copying everything across from the internal drive and GPRS didn't initially work, but when trying traffic for the second time, things locked up and after a bit, it rebooted and then traffic via my phone worked.

I have only just started trying this out, but it is looking so far like a vast improvement from 8.302. Certainly if traffic works for me, i'll be very happy.

Oh, I did not alter any previous files like model.txt or anything else, I literally just overwrote with TTuser's version, even the TTHome stuff as I was curious to see if things worked.

Now I am going to play around with TTHome

Traffic also works in home as does Weather etc. This is great

I have a GO720 that thinks or thought it was a GO730, now it is getting schitzophenic and doesn't know what it is :yourock: TTuser

Ok, mp3 plays perfectly, once I put to internal speaker, but will use FM in the car.
Yes traffic, weather etc works fine and from TTHome too. This is the best navcore I have come across

Several problems so far on a go 710,

fm does not work as before, so does the TMC function.

But when it is docked, it searches for TMC signal for ever, who knows how to disable this?

Another problem is lagged sound/video in ttmplayer, it must be due to this navcore as in navcore 8.3 it is normal.

Got it working OK on a 710 - only niggle is that I have to accept the legal notice on every boot up, is that normal or any idea on a fix?are you using the switch files?
only loaded to see what the fuss was & deleted it again but think i saw something in the setconfig.txt...
check the descriptions & which one clears the ram on shutdown/boot...

TTUser thank you for this great working version. I never expected there would be a newer version then 8.204 which really would run smooth on a TTOne. Expected the TTOne to be a closed chapter. But now I have a smooth 8.410, running ALG, IQRoutes, RDS/TMC and even Loquendo !!

When enabling the x40light emulator (to run Loquendo on a TTOne) their are two options I really miss;
1) play demo route
2) remove route

Is there a way to enable those options again (under x40light) ?

================

EDIT:
Oeps those options aren't gone, only placed to a menu screen where I never used the buttons.
After you planned the route, on the below of the screen there are 3 options;
DETAIL - CLEAR ROUTE - OK
Previously I used those options from the main menu (MAIN MENU PAGE 2 or 3)

Got it working OK on a 710 - only niggle is that I have to accept the legal notice on every boot up, is that normal or any idea on a fix?

I see to have had than on navcore from 8.300 onwards and on this one too.
Biggest feature/benefit for me is Traffic via GPRS works as I never managed to get it to with 8.204.

If it starts up and shuts down with the ignition in the car, I will send TTuser a bottle of finest Polish vodka because I have missed this since my 710 days and I am not using noautosuspend.dat either, so that is not the cause.

Sorry rytenuff, I can't help you, I don't use computer voices...

Hi there i created a package from the Navcore for the One Series (without XL):

Navcore 8.410.1218 One Serie ( http://www.linksave.in/186068210249b40db19edb5) http://www.linksave.in/186068210249b40db19edb5.png ( http://www.linksave.in/186068210249b40db19edb5)
PW: paris2k

TTS and Bluetooth are deactivated.
To activate it, you must open the Config\setconfig.txt file and delete ttsoff and btoff line.

Home and new system files are in an extra archive.

New system 5.5122 works very good on my One V2.

Allegedly there should be a Anti-Aliasing function for the map.... But couldn't find it.

Allegedly there should be a Anti-Aliasing function for the map.... But couldn't find it.

That would be a very welcomed feature. Garmin uses Anti-Aliasing on their maps, looks much better.

TTUser thank you for this great working version. I never expected there would be a newer version then 8.204 which really would run smooth on a TTOne. Expected the TTOne to be a closed chapter. But now I have a smooth 8.410, running ALG, IQRoutes, RDS/TMC and even Loquendo !!

When enabling the x40light emulator (to run Loquendo on a TTOne) their are two options I really miss;
1) play demo route
2) remove route

Is there a way to enable those options again (under x40light) ?

Unless I misunderstand you it is there already.
Navigate to/Details/Show route demo.
Navigate to/Clear Route

Sorry rytenuff, I can't help you, I don't use computer voices...

Thanks for your reply.
I have got it by using x40light and big loquendo voices.

Biggest feature/benefit for me is Traffic via GPRS works as I never managed to get it to with 8.204.

Is the Traffic feature based on a particular map. I don't see it on my 720 w/NC 8.410 & NA 825.2157

Hello, it's working on my TT930T but only EPT is not working!!
If someone knows why?
TX

______________
TT930T nav 8.410.1218 WCE 825.2157

Hello, it's working on my TT930T but only EPT is not working!!
If someone knows why?
TX

______________
TT930T nav 8.410.1218 WCE 825.2157

EPT is working in x30 emulation not in x40 ( standard emulation for this navcore )
all what are you need is text file named 'model.txt' with x30 in it placed in root of yours TT memory

Hi there i created a package from the Navcore for the One Series (without XL):

Navcore 8.410.1218 One Serie ( http://www.linksave.in/186068210249b40db19edb5) http://www.linksave.in/186068210249b40db19edb5.png ( http://www.linksave.in/186068210249b40db19edb5)
PW: paris2k

TTS and Bluetooth are deactivated.
To activate it, you must open the Config\setconfig.txt file and delete ttsoff and btoff line.

Home and new system files are in an extra archive.

New system 5.5122 works very good on my One V2.

ANY PERSONALIZATION OR IS ttuser version??

Unless I misunderstand you it is there already.
Navigate to/Details/Show route demo.
Navigate to/Clear Route

OOOPPPSSSS
I stand corrected !
The menu is so familiar with me that I never seen expected to find those options there. Blindly focussed on the place where I expected those buttons to be.

Hello Stuffed,
Thanks for your answer.
So i found a folder called "text" and inside i have "config". When i open i have "Current Emulation: x40 BT: 1 Run in Save RAM Mode Cleaning disabled". So if i understand what you said, i have to change to x30 and replace config to root ot my TT? Do i have to keep the text folder or can i cancel it after?
TX

where i can find the home ddl patched'?

tnx

where i can find the home ddl patched'?

tnx

ANY PERSONALIZATION OR IS ttuser version??

I have added

- the original TT Splash, Suspend, LowBattery bmp file (no wide)
- added one german language
- added the system 5.5022, and the new 5.5122 extra
- in Config\setconfig.txt there are following config lines:
runclean
sdid:1
changedtext:TomTom One
ttsoff
btoff
bton
fmoff
nomsg

The rest is original from TTUser.

edit: The patched home dll is also in my download.

- in Config\setconfig.txt there are following config lines:
sdid:1
The rest is original from TTUser.


It's all original TTUser !! He created those switch files. :punish: ;)

But more interesting; explain why you use the sdid:1 switch ?
Isn't this only usefull when you use more then one SD card?

I use 2 SD cards, one with DE-AT-CH and one with Western and Central Europe.

Is it a problem for other people, which uses only one?

no it ain't a problem for single-SD-users. Was just curious whether it had other reasons to include it in an item specific dump.

I have added

- the original TT Splash, Suspend, LowBattery bmp file (no wide)
- added one german language
- added the system 5.5022, and the new 5.5122 extra
- in Config\setconfig.txt there are following config lines:
runclean
sdid:1
changedtext:TomTom One
ttsoff
btoff
bton
fmoff
nomsg

The rest is original from TTUser.

edit: The patched home dll is also in my download.

:oom:


?:confused:

I have a good feeling about this new navcore on my TTGO510-BL 5.5022:

- Even faster boot than previous one I had, 8.204 Rev.1.5
- Message of PC-Conection appears on screen again.
- Loquendo Voice doesn't seem as loud as before, or ... is it only in my imagination?

:thanks:TTuser

Same good feeling here, only difference with this navcore is that now cursor is 20 meters (60 feet) late compared to real position. Do you have the same problem?

:oom:
?:confused:

BTOFF and after that BTON has a reason when I am right.
BTOFF ofcourse disables BlueTooth functions, but after that you cannot delete Favorites anymore. Funny thing is that if you use BTON after that, Bluetooth stays away but the option to remove favorites appear again.
It's strange but that's what I read a while ago. But to make it more clear, this was related to NC 8.204 in combination with TTOne.
So personally I don't know wether it's needed again (but because he wrote it I assume he did test it)

i'm able to delete favorite with btoff with 8.410

with 8.204 i have to set bton

Same good feeling here, only difference with this navcore is that now cursor is 20 meters (60 feet) late compared to real position. Do you have the same problem?

same problem here, with ONE V6 (3thrd. Edition)

same problem here, with ONE V6 (3thrd. Edition)

i have the same problem


8.204 slower boot (about. 60 sec)

8.410 not real position

But now with TOMTOM ONE XL is possible ALG+IQ+LOQUENDO?
I don't understand if is the same as ONE where this is possible...

Regards

|_dan_|

One quirk that I see and has been previously mentioned, TT HOME "Operate My Device" displays the old icons.

all Features, Function, Use similar as already known, read readme for exact Infos


Fixes this problem:
http://www.ipmart-forum.com/showthread.php?t=338980

Adds a "distance and bearing to Home" marker to "browse map" mode.

Restores "Hide/Show Lane Images" icon missing that had gone missing in 8.410"notx40"

POI details that were displayed white on very light gray in 8.410"notx40" (nigh invisible) are now black on white again.

Favorites can be deleted again. That had nagged me since 8.204

Oh...yeah, works on a One LE.

Hi,

I have a GO700 and after a few seconds it restarts and does not locate satellites.
How can I fix this?

Thanks

Sorry my english

Hi,

I have a GO700 and after a few seconds it restarts and does not locate satellites.
How can I fix this?

Thanks

Sorry my english

Download the QuickGPSfix.

i mean with this Line
all Features, Function, Use similar as already known, read readme for exact Infosonly the additional SE Functions like switchfiles etc. not the Navcore Functions itself



how can you know that it does not locate satellites if it already after a few seconds restart ? a few Seconds are not enough to eat up the Satellites
:confused:makes for me not much Sense this Statement

ok try even with switchfile (word) "makesirfreset"
there was with 8.201 or whatever a gps prob by 700, the old inbuilt Solution exist now not more because i had think it was ok now, left is now only this Emergency switchfile

hi guys put this on my go520 ...
working great ..thanks ttuser...
patched home dll but when i go to operate my go it says no maps found ..

any ideas why please

mick

i mean with this Line
only the additional SE Functions like switchfiles etc. not the Navcore Functions itself



how can you know that it does not locate satellites if it already after a few seconds restart ? a few Seconds are not enough to eat up the Satellites
:confused:makes for me not much Sense this Statement

ok try even with switchfile (word) "makesirfreset"
there was with 8.201 or whatever a gps prob by 700, the old inbuilt Solution exist now not more because i had think it was ok now, left is now only this Emergency switchfile

Hi,

I tried to 2.ttn.sirf of 8201 and run perfect.

Thank you and sorry

Greetings

little doc on how to start using the ttsystem files to stay up to date with each release of software. for the newbies or to help you remember the map share process.

http://rapidshare.com/files/207239282/tomtom_add_new_map.doc

little doc on how to start using the ttsystem files to stay up to date with each release of software

http://rapidshare.com/files/207239282/tomtom_add_new_map.doc

Nice little write-up. Rep to you.

ok try even with switchfile (word) "makesirfreset"
there was with 8.201 or whatever a gps prob by 700, the old inbuilt Solution exist now not more because i had think it was ok now, left is now only this Emergency switchfile
Thanks TTuser this switchfile works for my Go 300 with spontaneous restarting and "no GPS action" (GPS circle not moving).
Problem solved with switchfile "makesirfreset".

Where is 08.03. new ttsystem ?

Where is 08.03. new ttsystem ?

Certainly isn't in a topic headed "SE Navcore 8.410.1218"

great work as usual ma friend;)

can someone explain me the difference between the original tomtom links please?

It works like a charm in my tomtom v3 / 1 Gb!!! REALLY THANK YOU!!!!!!!

works perfect on TTR2. but is there a switchfile to turn of rds/tmc receiver function in car docking?

Certainly isn't in a topic headed "SE Navcore 8.410.1218"

You see what we are up against? Can you see the a FAQ section will just invite comments like D'er what does FAQ stand for, does it mean my Traffic HQ will work and how can I get my Garmin running better. There are some very valid posts and damn good questions, but they get marred by such stupid noobs who, if they can read, give absolutely no willingness to do so and many that expect us to wet-nurse them.

Now please do not castigate me for my open frankness, but really, have you seen some of the questions they ask? Sometimes only a couple of posts earlier they have been answered and more commonly, many times.

Take the Meta thread for example. Why the hell does someone think that they need to keep adding blowfish codes when they are already listed? Are they thinking someone will suddenly delete them?

Why do people give blowfishcodes with no maps? Where the hell do they come from, but the original map files on the units licenced. And for what purpose does someone upload a map without a blowfish code?

yDG is doing a superb job. His patience is phenomenal, but FFS, please read before you post and remember most of our work is done through a willingness to help others, but please do not think we are here to read aloud to you before you get tucked up in bed chaps and chapesses.


Sorry if I have offended anyone. Not deliberately I assure you. At the moment I am fixing several PNAs from colleagues, clients and a few who actually pay decent money for me to waste my time reading, because they cannot be bothered to.

Rant over, have a superb evening, night etc. 8.410 is superb and thank you TTuser. I know others were involved, but we all know who does the actual fixes. Actually some of you might not. Give your reps to TTuser, a first rate coder.

Nice! Thank you TTuser. Got it working perfectly on my one on a blank sd card. All I had to do was copy in my startup/shutdown pics and my voices afterwards.

Has anyone seen flickering/blinking on this Navcore with a 910?
If so, any fix for this?

Seems to work stable at old ONE v1, only BlueTooth keeps crashing (perhaps because different hardware on old v1 vs newer models?). I Can connect it with my phone, but when trying to use Buddies or Weather it kicks You off the menu (back to main screen). BT keeps connecting and disconnecting with phone, if left it on. This seems to be same problem with all ONE dumps and other unofficial Navcore versions so far (@ v1 ONE)- but its not a big deal really.

I think (no real measuring done) that calculating new route is faster, and vehicle positioning _may_ follow better on map when driving (needs still more testing). I think that new 825 maps have something to do with faster route calculating too, since I think after new map (before 8.410) it was faster than 815 map. Or could it be that new Navcore versions work better together with newer maps? Or its just me..... :hehe:

Anyway, very good update, Thanks Very Much TTuser! :urtheman:

:thanks:

hi all does anyone no how to get tts working on this nav core it is working on my truck nav core but not this one many thanks :good2:

My 720 just hangs on the splash.

You see what we are up against?

Sorry if I have offended anyone. Not deliberately I assure you.

... why not deliberately? Some people need offending.

:exactly:

Has anyone seen flickering/blinking on this Navcore with a 910?
If so, any fix for this?

I've cannot report that I have any problems on my 710. Seems to be flawless.
For the 720 it is the best navcore ever installed on this unit and it is flawless.
Literally went from v8.203 straight to 8.410, deleted switchfiles, used yDG for patch of home and nothing to report wrong.

Have a few issues with OneXL at the moment, but sure not insurmountable. Seems to run better from SD card than unit, but I was tired when I installed and possibly my fault. Tomorrow is another day.

I am over the moon. Driving tomorrow and if it shutsdown automatically and starts up the same, a good vodka is on the way to TTuser. I am talking Go 720 here - my schizo beasty, that has never shut down or rebooted properly since I got it. But so far all is fan tabby dosey.

Basically I leave my 710 doing what it does best - navigating. I play with my 720 and try to gain the extra mile. This navcore for 720 does this and more.

All I did was over write 8.320 with SE navcore 8.410, nothing more. So I have cleaned things up a little since, but not much.


I really hope the rest you you guys and dolls are enjoying this navcore. It is the frst that gives GPRS properly (I use x30) in model.txt, but that seems to be only change

TTuser, if you give yDG your postal address, I will sent you via UPS if it is ok, or PM me mate. I feel I really owe you this time

Please do not get me wrong. I know others involved in this, but TTuser has been our saviour so many times. This is my way of repaying properly.

so you got your 720 to autostart? Mine will shut down but not autostart how did you do that?

can anybody upload a image of this navcore for a TT910

please..........


Flack

... why not deliberately? Some people need offending.

:exactly:

you are so right. Hence - You are the weakest link - goodbye to the prat that did not know premium was better than standard.

It really grieves me to see and hear how the pass mark in exams has improved over recent years.

It just undermines proper education standards that some gain points and pass when quite frankly they should not. I work with young people with degrees that are unable to write a correct sentence, misspell words and write the most obtuse English imaginable.

When you consider we have people writing here from all over the world and yet an English person does not know the difference between standard and premium, how can anyone have faith in educational standards?

As you probably know, I work in about 7 languages fluently and another 2 not so fluently and some others at a rudimentary level, I am appalled at the lack of education of our youngsters. (In UK) In Romania, I was told off by a 6 year old for correctly saying "you mean whom, surely, not who" (gf's son, so excused)

Sorry, yet another rant over.

Actually, the thing that concerns me, is that some say TTuser does not write good English. Well in fairness, his English is really easy to understand. In Europe, the words are often in a different order from the way we write a sentence, but before anyone says another word about TTuser's English, let it be noted that our own English speaking public are letting the side down.

If I could speak, or more correctly write, in some of our neighbours languages, I would be happier. I know I fall short or correct translational abilities and rely a lot on colleagues helping me out. I bet between us in this forum we work in about 14 or more languages

We ought to know our own language properly though !!!!!

What would you guys/girls say is the best model to emulate with this if you have a one?

can anybody upload a image of this navcore for a TT910

please..........


Flack

My TomTom GO 910 (Danish language)

Version:

http://home18.inet.tele.dk/kir/1.jpg

Mainmenu:

http://home18.inet.tele.dk/kir/2.jpg

http://home18.inet.tele.dk/kir/3.jpg

http://home18.inet.tele.dk/kir/4.jpg


Settings:

http://home18.inet.tele.dk/kir/5.jpg

http://home18.inet.tele.dk/kir/6.jpg

http://home18.inet.tele.dk/kir/7.jpg

http://home18.inet.tele.dk/kir/8.jpg

http://home18.inet.tele.dk/kir/9.jpg

http://home18.inet.tele.dk/kir/10.jpg

http://home18.inet.tele.dk/kir/11.jpg

http://home18.inet.tele.dk/kir/12.jpg

What would you guys/girls say is the best model to emulate with this if you have a one?

What a very good question.

I hope you have opened a good debate here.
For this reason, I think you deserve rep points, but would add, I would also like your opinion. I am currently looking at a OneXL. GO720 was seamless, The One is not so straightforward
oh, and I am a bloke. Lets hear the female side

i have a one v3 (512mb internal) i think the best navcore is 8.204

only one problem: slow boot ..about 60 seconds...

i want to try it with new bootloader 5.5112

First time more thanks, good work and perfect Navcore.

But on my One XL is problem with display after return from menu. If I any work in menu a back to navigation screen, display on screen big white triangle, slow time freeze and next display corect maps. See on picture..

On my 910 everything seems to works great.

However I have a few observations:-

1. For RDS-TMC to work correctly in the car cradle, I found that the TomTom 910 must be off and the ignition off. Then place the 910 into the car cradle and then turn on and wait for it to load. Then you can start the car, and the 910 will not freeze.

2. My 910 would take over a 1 minute to load when first turned on, but after disabling "Bluetooth" it loads within seconds.

hi guys put this on my go520 ...
working great ..thanks ttuser...
patched home dll but when i go to operate my go it says no maps found ..

any ideas why please

mick

You need to replace the dll provided by TTuser in the folder of the official navcore for your device:

For example assuming your navicore is 8.010 (if different use that), in XP:

- go to
C:\Documents and Settings\???\Application Data\TomTom\HOME\Profiles\xxx.default\extensions\N avcore.8.010.9363@tomtom.com

- copy in that folder all the files including the dat** files, but excluding install.rdf (important: this must remain original if not Home will try to download again) provided for the emulator by TTuser (you find them in basic pack. Read the readme provided )

- rename 8-410-1218-1.dll to 8-010-9369-1.dll (erase this first)

Now it will work ;)

PS for Vista you find the folder in
C:\Users\???\AppData\Roaming\TomTom\HOME\Profiles\ xxx.default\extension\

[LIST]
Changelog:
10.03. now again a basicpack + single ttsystem or i goes crazy with uploading always all new
again inbuilt "Solution" for x00 GPS Prob
x40light changed a little, heard this works better, old x40light now under x40light2 available


Thank you TTuser!

Tried on my ONE 3rd the new x40light emulation and it's works A LOT better (using with TTS).
Now it goes in suspension mode properly, not rebooting every time. Plus it doesn't seem to suffer of the occasional freeze anymore.

Also GPS signal is better.

:yourock:

someone try bootloader 5.5122 ...i find it into the cab from first post

I also installed the new bootloader: no change whatsoever with the previous one.
And it should be like this since ONE 3rd doesn't have a SD card :lol:

Dont know if the upgrade to the new navcore could possibly do this But I am getting a lock of 5 sattelites while sitting INSIDE my house. I have NEVER had this before.

So...is this navcore meant to be released for tomtom one? (i have one 30 series).
Does that mean that I will be able to use an "official" release with ALG+IQ and TTS? (in 8.010 there were no alg+iq as far as i know).
Why is available on tomtom servers while they don't mention it at all on the website or through update in tomtom home?
Sorry for my stupid question, since i'm a new tomtom user, i'm sure you know better tomtom strategies and expectations than I do. Thanks!!

TTuser "gets hold of" official but sometimes only beta versions of navcores & tweaks to suit most other models for us as his SE versions so the "official version" may never actually be available through TTHome.

thanks bigger dave! Now everything is clearer!

So...is this navcore meant to be released for tomtom one? (i have one 30 series).
Does that mean that I will be able to use an "official" release with ALG+IQ and TTS? (in 8.010 there were no alg+iq as far as i know).
Why is available on tomtom servers while they don't mention it at all on the website or through update in tomtom home?
Sorry for my stupid question, since i'm a new tomtom user, i'm sure you know better tomtom strategies and expectations than I do. Thanks!!If you have a One or XL EasyPort 2009 model with 2GB Internal storage then this is the navcore for you.
It's all in the CAB file name usually.

Dont know if the upgrade to the new navcore could possibly do this But I am getting a lock of 5 sattelites while sitting INSIDE my house. I have NEVER had this before.

Same over here, my house is full of sattelites !!:shoutout:

If you have a One or XL EasyPort 2009 model with 2GB Internal storage then this is the navcore for you.
It's all in the CAB file name usually.

Yes, that's exactly my model (one with easyport 2gb).
So, don't i need a SE version this time, do i?
Is your patcher (yDGpatch) good to patch ttsystem of this version??
Thanks a lot guys for all your efforts.

i have a one v3 (512mb internal) i think the best navcore is 8.204

only one problem: slow boot ..about 60 seconds...

i want to try it with new bootloader 5.5112

Having a TT One 3rd edition, BL 5.5022. EE 815.2003 IQ routes map.
For me, this is the best and fastest NC of all. Boot time is 3-4 seconds. Handling the menu is fast and stable for me. With the switchfiles I usually have 7.5MB of free ram out of the 32MB.
The new feature is nice when browsing the map.

Great job, TTUser!
:ilove:

Having a TT One 3rd edition, BL 5.5022. EE 815.2003 IQ routes map.
For me, this is the best and fastest NC of all. Boot time is 3-4 seconds. Handling the menu is fast and stable for me. With the switchfiles I usually have 7.5MB of free ram out of the 32MB.
The new feature is nice when browsing the map.

Great job, TTUser!
:ilove:

How are your switchfiles‘ configurations? Mine TT One 3rd edition could only have 5MB free ram.

Thanks ttuser !!!!!

From all arround the world, thanks for be brillant.

You got a lot of could bears for free in Spain in you would !!!

How are your switchfiles‘ configurations? Mine TT One 3rd edition could only have 5MB free ram.


bton (you can save some extra ram by disabling bt in the menu), fmoff, nomsg, rm, runclean, ttsoff

Having an other TTone regional (with 2GB internal ram), same settings, same free ram, same NC, works brilliantly.

The receivement of GPS is unbelieveable !! Like others said before; previous in house I never received any satellite, now I have about 5 !!

One remark; The BlueTooth chips always stays on, whether you use BTON / BTOFF, or a combination. My phone keeps seeïng it !
With BTOFF the BT menu items are gone, and Current Configuration says BT:0 but still my phone sees it. So The chip stays on.

Curious; What is that icon underneith the satellite receivement ? Is this an icon for a GPS-Mouse ?
http://img136.imageshack.us/img136/4411/tticon.jpg

In TTHome I have it with this Questionmark. But on my TomTom I see it with a red cross.

I now have this running pretty well on my 710. I still have the legal notice on boot up despite trying several config switches. I have noticed then when rmoving the SD card with the unit in standby, it starts up itself. RDS-TMC is working well with a fast lock, satellite lock is quick, even indoors.

One bug I have noticed, I have the unit set to power off when external power is lost, it does this OK but will not restart without pressing the reset switch. Anyone else noticed this or have a fix? I have switched off the power off facility for now, but would prefer to use it if poss :)

To get rid of that Legal Notice;
use the x40light2 switch (instead of x40light)
It boots faster (because suspend now works and doesn't crash) and that Legal Notice won't appear anymore.
be known; you have to restart it 1 or 2 times before it's really gone, has to do with writing the settings while shutting down.

To get rid of that Legal Notice;
use the x40light2 switch (instead of x40light)
It boots faster (because suspend now works and doesn't crash) and that Legal Notice won't appear anymore.
be known; you have to restart it 1 or 2 times before it's really gone, has to do with writing the settings while shutting down.

Just tried the x40light2 switch and the unit doesn't now restart without pressing the reset switch - seems to boot just as quick either way. I've even tried the usesetting flag

This x40light2 solved the problem you had in my case. Though I have a TTOne v2. Mine also kept starting with this Legal Notice screen. But was solved with x40light2 (Did you restart the TT about 2 or 3 times afterward ? Sometimes you have to keep on pushing the on/off button several times before it starts,but after 3 times, all problems were gone here)

Yes, tried a few times M8, which version of the ttsystem are you using, the one from today or the one from last week?

Todays version. NavCore and System

good evening!

First THANKS TTUSER!!! Great job!! I use a GO910 on a fm transmitter cradle, it works really perfect, exept two small things:
1) sometimes the streets disappear and you can only see the area, it happens for a quarter of a second, sometimes one time, sometimes two or three times in a short period. it looks like a refresh of the map.. What the hell is that??

2) i can#t send the navigation voice to the fm transmitter, in the menu, there is no option for it, BUT my music works with the fm transmitter and i can check the box in the music speaker settings... Its not a big thing, but maybe someone has an idea??

To get rid of that Legal Notice;
use the x40light2 switch (instead of x40light)
It boots faster (because suspend now works and doesn't crash) and that Legal Notice won't appear anymore.
be known; you have to restart it 1 or 2 times before it's really gone, has to do with writing the settings while shutting down.

Hi I have TT One v2 with a 2GB card, how do I switch to x40light2 please? also I cannot get some maps to work with this navcore, I am successfully running Nth America v800.1762 but cannot get Nth America 825.2157 or USA & Canada 825.2159 to work, patched ok and copied in dct but still says you cannot use maps. Anyone else had this problem?

Hello all,
This new navcore looks good in real navigation with a GO 910 but I must start je GPS before docking it in the car to revent a hard reboot aftera 1 mn wait wikth a dark screen.
Every thing is working for now, the sound level is good, the route calculation is fast, they are new vocal instructions which simplify the driving in announcing future turning options...
The TMC is working very well, bluetouth freehands with the telephon is perfect.
So for now, only the autostart and the Tomplayer is not functionning with this version but I don't watch movies while driving so...
Good work.

Hi
If I use BToff to save the ram then how can I active the speed cameras or play with them?!
Any way that I use BToff with Speed Camera icon?
thanks

To get rid of that Legal Notice;
use the x40light2 switch (instead of x40light)
It boots faster (because suspend now works and doesn't crash) and that Legal Notice won't appear anymore.
be known; you have to restart it 1 or 2 times before it's really gone, has to do with writing the settings while shutting down.


I'm guessing the problem is because the unit isn't shutting down properly causing it to crash and then display the waring message and be difficult to re-start.

Is this a problem with x10 generally - or just my unit

Hi
If I use BToff to save the ram then how can I active the speed cameras or play with them?!
Any way that I use BToff with Speed Camera icon?
thanks

My ONEv2 actually reports more free RAM with the btoff removed from root.
With it not in there I am seeing 7.2Mb whilst with it in root I am only getting 4.3Mb free RAM.
I have removed the connect2internet.so, connect2internet.db.encode and connect2internetdb files from root.

well, looks like I have better undestanding of this issue now:

it appears that it takes almost 5 minute(!!) for TomTom x10 model to boot on when placed back on the windshield mount and engine is switched back on..

Initially I was pushing power button on top of the unit because it would not not start up automatically and that didn't work either. I had to pock the reset hole instead each time.
Fortunatelly, this morning I had no time to fiddle around with TomTom (was grunning later for work) and left it hanging on the mount instead. I was quite surprised to see that TomTom autostarted approximately 5 minutes later by itself. I know, this is quite rediculous amount of delay but hey...

Please verify that this is valid for your TomTom as well. :wave:



I ...

One bug I have noticed, I have the unit set to power off when external power is lost, it does this OK but will not restart without pressing the reset switch. Anyone else noticed this or have a fix? I have switched off the power off facility for now, but would prefer to use it if poss :)

I'm guessing the problem is because the unit isn't shutting down properly causing it to crash and then display the waring message and be difficult to re-start.

Is this a problem with x10 generally - or just my unit

I think your diagnosis is spot on. I have two Go 710's and both exhibit this phenomenon but it is particularly bad on the earlier model.

A solution would be most welcome - in every other respect 8410 is a perfect navcore for these Tomtoms - all praise to TTUser.

This problem (crashing during going to suspend mode, next boot causing a reboot + Legal Notice screen) also happened to my TTOne V2 with 8.410
The way to solve this (on my system) was using the switchfile; x40light2

After I used that switch, it needed 2 reboots. Ever since all problems are gone.
IQRoute, ALG, RDS/TMC, TTS works, no Legal Notice screen anymore (unless I reset / fully restart it by taking the SD out) And the usual fast (out-of-suspend) boots also work.

Hey LessRam,

You forget to mention that when people are using the x40light switchfile, BT and voice input will NOT work anymore.

I think this is important information, coming from TTusers readmenot textfile, that will make many people NOT want to use this switchfile...

Gr Tjilitjap :ilove:

Hi Lessram, Ive been using your 8.204 dump for your One XL from a few months ago and it has been awesome - thanks a lot. And I didnt try loquendo as you thought the cpu was perhaps not powerful enough. Ive been trying unsuccessfully to get the 8.410 navcore to run on my 1XL. Would you be able to post a dump of yours, like you did for the 8204 navcore? Cheers.

using the switchfile
model:x40light
runclean
delgns
delmap
ttsoff
fmoff
noqfixdel
for my TTone XL with nc 8.410 works nearly all perfect.
But no more option "delete route" in menue. Therefore I switched back to x30

sorry for making a mistake.
I used switchfile x40light2 not x40light
Using x40light there is no access to TomTom services and TomTom speedcams

Using x40light there is no access to TomTom services and TomTom speedcams
Use bton and you have full acces to TT Services (including speedcams).
Also as already pointed out by lessram, reported free ram is a lot more using bton (instead of btoff).


But no more option "delete route" in menue. Therefore I switched back to x30

The option to delete the route is on the Status Summary screen. It's even quicker to access (2 clicks instead of 3 ;))

well, looks like I have better undestanding of this issue now:

it appears that it takes almost 5 minute(!!) for TomTom x10 model to boot on when placed back on the windshield mount and engine is switched back on..

Initially I was pushing power button on top of the unit because it would not not start up automatically and that didn't work either. I had to pock the reset hole instead each time.
Fortunatelly, this morning I had no time to fiddle around with TomTom (was grunning later for work) and left it hanging on the mount instead. I was quite surprised to see that TomTom autostarted approximately 5 minutes later by itself. I know, this is quite rediculous amount of delay but hey...

Please verify that this is valid for your TomTom as well. :wave:

That's very similar on mine. I have disabled the power off on power loss option from the battery saving menu. Now use the button to switch off and back on to avoid the crash.

I do find when it crashes, you can get it to reboot quicker by removing the SD card - about 1 minute

Hi scoiattolo49
THX a lot. this helped really.

Also as already pointed out by lessram, reported free ram is a lot more using bton (instead of btoff).

I have 2 TT One 3rd ed. devices. I save 1-1.5MB ram by using the bton switchfile AND then disabling BT in the menu.

Hi scoiattolo49
THX a lot. this helped really.

Use bton and you have full acces to TT Services (including speedcams).
Also as already pointed out by lessram, reported free ram is a lot more using bton (instead of btoff).

The option to delete the route is on the Status Summary screen. It's even quicker to access (2 clicks instead of 3 ;))


Erm...no, that was me.

http://www.ipmart-forum.com/showpost.php?p=2569435&postcount=242

i wonder if LOQUENDO 7 works ????
and where are the files ????

my one only works with LOQUENDO 6 and may be i don't have the apropiate files to work the 7

thanks

Hi

I like a few users had an issue with a flicking screen and losing the roads for a second or two.

I changed to a faster SD card and the issue seems to have gone away

give it a go and let us know

Erm...no, that was me.

Yes you are right :exactly:
Sorry I mixed up :weedman:

i wonder if LOQUENDO 7 works ????
and where are the files ????
my one only works with LOQUENDO 6 and may be i don't have the apropiate files to work the 7
Yes it works.
You can download the voices directly from TT. Links here:
http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111

For a ONE use the new revised ttsystem (first post) and set the emulation to x40light.
Remember to set also bton since it gives more ram memory, necessary for loquendo to run smoothly

Thanks TTuser, it works on my ONE 3thrd. Edition V6.

You are the best


:good2:

Hello please help, I have a TT910 Navcore.8.410 and it creates a file (restart) and after some time off for themselves.

restart

Timestamp: 2009-03-09 22:58:39
Version: 8.410.1218
Received signal 11 [errno 0, code 1]
Fault address: 0x68
Backtrace:
/ bin / TTN (sin +0 xc0c) [0x12198]
/ bin / TTN (tan +0 x3648) [0x142c4]
/ lib/libpthread.so.0 [0x4012cbd0]
/ bin / TTN [0x7edac]
/ bin / TTN [0x7ecc0]
/ bin / TTN [0x7ecc0]
/ bin / TTN [0x85eb8]
/ bin / TTN [0x86268]
/ bin / TTN [0x2faac]
/ bin / TTN [0x2664c8]
/ bin / TTN (+0 x6ac sin) [0x11c38]
/ lib/libosal.so.0 (_ZN20COSALActiveScheduler11RoundRobbinEv +0 x170) [0x4002ee04]
/ bin / TTN (sin +0 x1718) [0x12ca4]
/ lib/libc.so.6 (__libc_start_main +0 xdc) [0x4019bcd4]
# # # # ARM registers:
r0 = 00945cb8
r1 = ffffffff
r2 = ffffffff
r3 = 00000000
r4 = 00945cd0
r5 = 00000001
r6 = 000ab204
R7 = 0096daa0
r8 = 00000000
r9 = bea5257c
r10 = bea52588
fp = bea52140
ip = bea52144
sp = bea5212c
lr = 0007edac
pc = 0002f344
cpsr = a0000010
---- End of crash report ------------------------------------------ --------------------------------- If there is any solution Thanks

so i come back to 8.204

@TTuser

TT One V3 - Bootloader 5.5122

In the basic kit there is reference about x40light (but not about x40light2)
Are both accessible (x40light & x40light2) values for model.txt ?

With my TT One Boot with TT One logo than fter a minute reboot with standard TT llogo than finall appear the TT menu.

When I power off TT, after that when I opwer on it reapper the TT logo as the TTw as really power off (not standby).
But I didn't use poweroff switch because is not vali for Navcore > 8.051.
With 8.410 the TT does it go to poweroff?

With model.txt x20 or x30 works fine
with model x40 works fine but in info screen appear the headphone with red cross
with model x40light or x40light2 (that works only with bton) at boot need two reboot to go on and after poweron is not came from standby but as poweroff.

With any model setting at reboot there is always a wanrning to accept (I disable any warning in setup but warning appera each time that I disconnect the TT from USB).

Is it just me, or has the display graphics changed with this new version? I am running it with X20 emulation, and I just noticed yesterday that there is a "banding" effect on the colours.

For example if you are on a motorway with fields on either side, then at the bototm of the screen the fields will be light green, then a third of the way up the screen it will go slightly darker, and so on. I can proabably see about 8 different "bands" of green in that scenario.

When in a built up area with the normal brown colouring, and the map automtically zooms in, there is a band about half way down the screen where the brown changes colour.

It is very noticeable, and I would be surprised if I had not noticed it before? Just wondering if it was just me experiencing it!

Thanks!

@TTuser

TT One V3 - Bootloader 5.5122

In the basic kit there is reference about x40light (but not about x40light2)
Are both accessible (x40light & x40light2) values for model.txt ?

With my TT One Boot with TT One logo than fter a minute reboot with standard TT llogo than finall appear the TT menu.

When I power off TT, after that when I opwer on it reapper the TT logo as the TTw as really power off (not standby).
But I didn't use poweroff switch because is not vali for Navcore > 8.051.
With 8.410 the TT does it go to poweroff?

With model.txt x20 or x30 works fine
with model x40 works fine but in info screen appear the headphone with red cross
with model x40light or x40light2 (that works only with bton) at boot need two reboot to go on and after poweron is not came from standby but as poweroff.

With any model setting at reboot there is always a wanrning to accept (I disable any warning in setup but warning appera each time that I disconnect the TT from USB).

If by One v3 you mean One 3rd, then I have the same model and I don't have any of the problems you mention.

Mine works excellently, better then any previuos Navcore :dance2: (including Loquendo that works very smoothly).

Are you sure to use the TTuser's revised ttsystem (posted 10.03) and to properly use the setconfig.txt?

scoiattolo no problem with the delay of cursors???

do you use it in x40 or x40 light??

TNX

@scoiattolo49

I'm sure.
The TTSYSTEM is dated 10.03.2009.
I tried many times and the result are the same.
I tried with setconfig.txt in config folder and in root
I tried with separate files (runclean runcheck model.txt changedtext.tx) in Config and in root
My TT One 3rd edition (identified in TTGO.BIF as TTONE V6) works only with model=40 (or x20/x30).

If it was a problem in config option it cannot works also in x20/x30/x40 emulation.

Could you post your setconfig.txt ?

@scoiattolo49

I'm sure.
The TTSYSTEM is dated 10.03.2009.
I tried many times and the result are the same.
I tried with setconfig.txt in config folder and in root
I tried with separate files (runclean runcheck model.txt changedtext.tx) in Config and in root
My TT One 3rd edition (identified in TTGO.BIF as TTONE V6) works only with model=40 (or x20/x30).

If it was a problem in config option it cannot works also in x20/x30/x40 emulation.

Could you post your setconfig.txt ?

My setconfig.txt is very simple

model: x40light2
bton

nothing else ;)

Of course the Outsourced.8410 directory is present. No other switch present.

Reported free RAM
with Loquendo (x30 voices) = 5/6 MB
without Loquendo = 7/8 MB

And yes, it goes correctly in suspension mode when you switch off ;)

X40light works perfectly as well. Just slightly different menu

With your setconfig,txt in Config fodler (but I etsted also into root), the TT stucked on boot logo.

Could you make a backup of your config (without map and TTLOGO.BIF)?

Of course if I change in setconfig.txt model=x40 works fine.

This problem (crashing during going to suspend mode, next boot causing a reboot + Legal Notice screen) also happened to my TTOne V2 with 8.410
The way to solve this (on my system) was using the switchfile; x40light2

After I used that switch, it needed 2 reboots. Ever since all problems are gone.
IQRoute, ALG, RDS/TMC, TTS works, no Legal Notice screen anymore (unless I reset / fully restart it by taking the SD out) And the usual fast (out-of-suspend) boots also work.

Lessram, could you please upload a working dump of your one with 8.410 navcore? I can not get more than 2.4mb free ram with my one and it hangs a little bit. Thank's in advance...

But you can use with x40light2with other combination of switches?
Do you use setconfig.txt o separate switch fiels?
In Config folder o in the root?

Sorry, i can not find these x40light2 files, and Config folder, i searched in the treat. And also don't know to use setconfig.txt. Is there a turtorial for? Excuse me again for maybe dum questions...

As requested here is a dump of my TT One 3rd perfectly working:

http://rapidshare.com/files/208408829/8_410_DUMP_ONE_3rd.rar

:wave:


Removed files:

Maps directory (Central_and_Eastern_Europe and Benelux)
LoquendoTTS contents (originally containing x30 voice perfectly working)
ttgo.bif
ttgo.ori
ttgo.bak
CurrentLocation.dat
TomTom-Cfg directory
since they contain personal info

As requested here is a dump of my TT One 3rd perfectly working:

http://rapidshare.com/files/208360582/8_410_ipmart.rar

:wave:


File removed:

Maps directory (Central_and_Eastern_Europe and Benelux)

LoquendoTTS contents (originally containing x30 voice perfectly working)

ttgo.bif
ttgo.ori
ttgo.bak
CurrentLocation.dat
TomTom-Cfg directory

since they contain personal infoThanks a lot mate! I will try :good2:

Oh no a dump again :(. Which gives only problems because people try to install it without them knowing what they are actually doing. Good examples is Mntsos whom does not even know how to use the setconfig.txt file, while it is all clearly explained in the readmenot.txt file which comes with it and numerous amount of times on this forum).
Just read the tutorials available in the FAQ page in the root of the TomTom navigations system section of this forum and read the readme(not)s.txt. There is absolutely no need to use a system dump.

I didi the dump just to explain by example.
As you have noticed (did you?) I have not posted it on a separate thread giving it a fancy title (e.g. "The perfect dump for ONE: everything works" or "The best and latest for your ONE. Just copy on your device and go") and encouraging people to download it... quite the opposite in fact.

Simply I had the impression that the latest posters (like Bovirus and Mntsos but I'm sure a lot more) didn't fully understand TTuser notes that I believe they have read, so to help them out I gave an example on how thing have to be set up to work properly.



PS RS reports 55 download in one hour... amazing!

You're right scoiattolo, and thanks for the dump.
Often people doesn't understand tutorial/readme, sometimes because they're bad written, sometimes because they require a knowledge of "tomtom vocabulary" (TTS, ASR, SWITCHFILES, EPT, SE_Navcore, EMU etc.etc.etc.).
I see nothing bad in providing a "pre-built" working package for a specific model of tomtom...users have the freedom to take it or not.
Sometimes people are more confident about a package prepared by an "expert" rather than building one by theirselves and also sometimes they don't have time/will/skills to read and understand all the necessary in order to do that.

Obviously, you have to build it by yourself (starting from ttuser package) if you have particular needs.

I didi the dump just to explain by example.
As you have noticed (did you?) I have not posted it on a separate thread giving it a fancy title (e.g. "The perfect dump for ONE: everything works" or "The best and latest for your ONE. Just copy on your device and go") and encouraging people to download it... quite the opposite in fact.

Simply I had the impression that the latest posters (like Bovirus and Mntsos but I'm sure a lot more) didn't fully understand TTuser notes that I believe they have read, so to help them out I gave an example on how thing have to be set up to work properly.

PS RS reports 55 download in one hour... amazing!
Your dump works perfect. 7,5mb free memory, tts with old big files work.
Thank's a lot for help

There is nothing wrong with providing a pre-build system, however a lot of people will just copy it over there excisting configuration and report a lot of problems. However if people would just have read the numerous readme files and tutorials they would be easily able to themself, which would be better for them , because you can setup the system the way you want it to be and it would create less question.
If you do not understand the tutorials written by YDG and others in the FAQ section of this forum part I wonder if you should even try installing a dump.... But heh if it works all is fine, but if you have question please reade the reamde files and tutorials first.

There is nothing wrong with providing a pre-build system, however a lot of people will just copy it over there excisting configuration and report a lot of problems. However if people would just have read the numerous readme files and tutorials they would be easily able to themself, which would be better for them , because you can setup the system the way you want it to be and it would create less question.


I agree....but "easily" is not the right word in my opinion, maybe cause english isn't my native language.


If you do not understand the tutorials written by YDG and others in the FAQ section of this forum part I wonder if you should even try installing a dump.... But heh if it works all is fine, but if you have question please reade the reamde files and tutorials first.

I'm not talking about me. But I guarantee I had many problems to understand , not the instructions, but what I needed and what I was doing (there are tons of different tomtom models out there). You can say "Put switchfiles there" but it's not expected that I know what switchfiles are (now I know) or "You need this se_ttsystem if your tomtom has ASR but you need this one if your tomtom has TTS but not ALG, and tthome dll etc.etc.etc."
How do you explain 32 pages on "Complete version bla bla 8.204 etc." thread? I don't think they're all stupid..I think they just want something ready to use that simply works (maybe they should not use it, but this is their desire I think).

I want to be clear, I'm not complaining at all. If someone want to participate in this forum and use all latest feature provided by our heroes like TTuser, he should at least try to learn and read tutorials.
But I wouldn't dislike if someone will open a thread tomorrow labelled "8.410 for Tomtom one 30 series with ALG+IQ but NOT BT, TTS etc. TESTED and WORKING".

As a novice I agree with scoiattolo any information is usefull for comparison sake. It does not mean i will just stick it on as i am trying to learn ! THANKS for the dump !

Agree with Aluks about:
But I wouldn't dislike if someone will open a thread tomorrow labelled "8.410 for Tomtom one 30 series with ALG+IQ but NOT BT, TTS etc. TESTED and WORKING
And i would say even stronger that sticky threats had to be like that.

I am busy with tomtom from the time of TT3. But if for sometime i don't follow the forums then is getting difficult to follow the discussions again, sorry...

PLEASE, dump, dump, dump!!!!

I know what to take and what not to take....

I'm sorry but I'm like the others, I don't understand how to install them ... In the basic pack, you have more files compared to working dump and I don't know what to do with them.

Even if my english level isn't very good, I think it's badly translated and sometimes you don't really know what to do ...

So yes, working dump are a good idea and easy to use.

Hello everybody,

May I ask to GOx40 owners if someone can provide us a copy of his(her) GOx40 Loquendo folders (all files) : it will be useful for making comparison between x30 and x40 files. Also, useful if we want to upgrade to last TTS voices.

Thanks for your help and thanks again for your advices, supports.
Good jobs :good2:

Bye

I have got 8.410.1218 with boot 5.5122 on my ONE V2 and all seems to work OK except when I request navigate to a town centre it switches to the keyboard screen but displays " one moment please ". I can type in a town but nothing happens and just shows the message.

Navigating to a postcode works fine.

Has anyone had this fault please and can anyone advise how to fix it.

I have keyboard set to small and querty.

Hi
1. Could you please let me know why switchfiles for 8.204 is exactly same as 8.410?!

2. do I need unzip switchfiles and copy Config folder to root or keep zip file switchfiles in root? ()which one is better)

3. all you said use BTOff to save ram but I tested and when I use BTOn in root then I have more Free ram?!

Tested on One XL, 3Rd, V2

thanks

I have got 8.410.1218 with boot 5.5122 on my ONE V2 and all seems to work OK except when I request navigate to a town centre it switches to the keyboard screen but displays " one moment please ". I can type in a town but nothing happens and just shows the message.

Navigating to a postcode works fine.

Has anyone had this fault please and can anyone advise how to fix it.

I have keyboard set to small and querty.

same problem on my 930, try to reset your tomtom.

same problem on my 930, try to reset your tomtom.

Thanks that seems to have sorted it.:thanks:

Even though I have Bt switched to on and have the safety cameras on the menu when I go into TThome and try to update them it says " This item cannot be installed on this device because of content restrictions "

I had this previously on 8.204 but sorted it by switching Bt on.

Any ideas anyone please?

@Best110

First of all Free RAM within TomTom does not say anything, so just ignore what it says there, it is completely useless.

Version 8.410 and 8204 do not differ that much, they are both orignally for x40.
TTuser likes to keep the switchfiles the same so everybody whom have installed it before can do so now by just learning as little new things as possible.
You can choose where you want to put your switchfiles:
1. all in the root as 0 kb text files (has the drawback that i makes it all very messy, so I do not advise that).
2. In the folder /Config as 0kb text files (all is nicely together, but you still have to make or remove files if you want to change something).
3. In the file named setconfig.txt in the folder /Config. (This is the one I advise you to use, everything is in one place and there is one file which contains all the switches you want in there).
If you unzip the switchfiles.zip file coming with the ttsystem.rar file you see that it contains the /Config folder. The /Config folder should contain:
setconfig.txt file and a version.txt file.
There will also be a model.txt and a cycle.txt, they are not needed (only if you want to write the model name seperately, you keep the model.txt, cycle.txt is if you want to change your model emulation everytime you start-up your tomtom again, you probably do not want that. So I advise to delete the model.txt and also the cycle.txt.
Edit the version.txt accodingly, as well as the setconfig.txt and all should work fine.
Remember that you should choose one of the three. Make sure you do not have any switchfiles left in the root if you want to control things within the /Config directory and the other way around. If so your TomTom will hang at random at start-up!

Hi!

Where can I get portuguese x30 Loquendo voices to work with this navcore?

The x10/x20 voices don't work correctly with this navcore, right?

hi

where can i find nav 8.410 download for tt1 v3 pls?

@JOnas On my TTOneV2 x10 voice also work.
@rudeboy1971 The first post has the basicpack and the ttsystem file, that's all you need to make it working on your TTOneV3. Also read the readme files provided with the packages and go the FAQ in this forum subsection to obtain the needed information.

Even though I have Bt switched to on and have the safety cameras on the menu when I go into TThome and try to update them it says " This item cannot be installed on this device because of content restrictions "


Get them for free from Maverick's post... ;)

http://www.ipmart-forum.com/showthread.php?t=240161

just copy them on the map folder (they need activation just once using Easyusetools)


PS if you do, don't forget to rep him

@ vincentn1981

THANK YOU SO MUCH FOR ANSWER
Just let me know that when I use Btoff then Bluetooth is off (good for one V3) and when i use Bton then I can play with speed cams
So there is any way we have both (Bluetooth inactive but still have Speed cams icon?)

Just let me know that when I use Btoff then Bluetooth is off (good for one V3) and when i use Bton then I can play with speed cams
So there is any way we have both (Bluetooth inactive but still have Speed cams icon?)

Just use x40light (or x40light2) emulation: BT is disabled by default and using BTON just makes the menus appear (BT is still off).

BTW that is why is called "light": some (ram hungry) function are disabled.
If you read TTuser readme (as everybody should do) this is clearly explained.

@JOnas On my TTOneV2 x10 voice also work.
@rudeboy1971 The first post has the basicpack and the ttsystem file, that's all you need to make it working on your TTOneV3. Also read the readme files provided with the packages and go the FAQ in this forum subsection to obtain the needed information.

Thank you you saved me !! I didn't know that you needed the ttsystem file ... Why isn't it included with the basicpack ?? And why it's not written somewhere that you need this file ??? And where can you find it ??

"First of all Free RAM within TomTom does not say anything, so just ignore what it says there, it is completely useless."
If Free RAM is "completely useless" why would anyone use, Outsourced Folder?
RAM is being used and released all the time you are operating the device. If you start off with only a little, say 1.5MB of free RAM, you could run out of RAM easily and your device will function very slowly.

Thank you you saved me !! I didn't know that you needed the ttsystem file ... Why isn't it included with the basicpack ?? And why it's not written somewhere that you need this file ??? And where can you find it ??

From TTuser's first post in this thread:

Changelog:
10.03. now again a basicpack + single ttsystem or i goes crazy with uploading always all newagain inbuilt "Solution" for x00 GPS Prob

PLUS links to
SE_Navcore.8.410.1218.Basicpack.rar
SE_ttsystem.8.410.1218.rar

Seems pretty clear to me.

@rytenuff as specially when you use Outsourced.bin it makes completely no sense to look at the free ram anymore, because part of the free ram will be running from the sd-card or internal drive.
Trusting on this crappy free ram indication within TomTom to use some kind of switches to turn on or off things, which against you think is logical is of course not very smart.
Anyway TomTom navcore is linux based, using all the ram and leaving just a little bit free is linux it's way of improving system speed, which is a good and smart thing: What good is a lot of main memory if a large part is kept free? (this is something only MS windows does and therefore it is also slow).