Installation SE_Navcore.8.410.1218.rev1.2 for GO700 (with the voices x30)
Read here :
http://www.ipmart-forum.com/showpost.php?p=2599888&postcount=22

Installation SE_Navcore.8.410.1218 rev 1.1 for GO700 (with the voices x30)
Sorry for my English:sorry:

Download Jdownloader :
http://www.anonym.to/?http://jdownloader.org/download/index
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost.php?p=2566284&postcount=15
(By following the example, you have the folder ASR)

- Read :
http://www.ipmart-forum.com/showpost.php?p=2563628&postcount=1
- You should have the folder : ASR (20450368 bytes)
- Download :
http://www.anonym.to/?http://rapidshare.com/files/207488048/SE_Navcore.8.410.1218.Basicpack.rar
Extract the folder : SE_Navcore.8.410.1218.Basicpack
- Download :
http://www.anonym.to/?http://rapidshare.com/files/207493352/SE_ttsystem.8.410.1218.rar
Extract the folder : SE_ttsystem.8.410.1218
- Download the voice to use :
http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111
Extract the folder voice
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=450399&d=1227432495
Extract the folder suspend
- Download the map you want to use :
For map : Western_and_Central_ Europe 825.2157 or other countries
For map : North_America 825.2157
Maps located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337584
For map : Australia 815.2086
Map located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337608
Extract the map
- To activate the map, read and download : Easyusetools for Keygen Mapcheck Metacheck ttsystempatcher
http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58
Extract the folder Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher

Installation :
1- Save the contents of your GO700 in a safe place on your hard drive
2- Clear all the contents of your GO700
3- Copy the folder ASR paste it in the root of your GO700
Open the folder ASR, to limit the volume of ASR folder (20450368 bytes), keep only the necessary :
Example ASR in English : 7 files for 1247664 bytes => 6ENG.ctx, acmod3200_car_eng_F16_compact_lew4.dat, commandsENG.ctx, ddg2p_eng_vadvde_large_lew4.dat, digitsENG.ctx, Support_asr.dat, yes_no_ENG.ctx
Example ASR in French : 7 files for 1108492 bytes => 6FRF.ctx, acmod3200_car_frf_F16_compact_lew4.dat, commandsFRF.ctx, ddg2p_frf_vadvde_large_lew4.dat, digitsFRF.ctx, Support_asr.dat, yes_no_FRF.ctx
Example ASR in US : 8 files for 1871128 bytes => 6ENU.ctx, acmod3200_car_enu_2_5_compact_lew4.dat, acmod3200_car_enu_f16_compact_lew4.dat, commandsENU.ctx, ddg2p_enu_vadvde_large_lew4.dat, digitsENU.ctx, Support_asr.dat, yes_no_ENU.ctx
Close the folder ASR
4- Open the folder : SE_Navcore.8.410.1218.Basicpack (downloaded)
- Install SE_Navcore.8.410.1218.Basicpack contents of the folder to the root of your GO700 later :
- delete the folders ephem, Navcore.8.410.1218@ tomtom.com, Outsourced.8410 and the file readmenot.txt
- unzip the folder switchfiles.zip, open the folder swichfiles, open folder Config, copy files setconfig.txt, version.txt and paste them in the root of your GO700
- open the file setconfig.txt, keep only “runclean” and “changedtext:TomTom GO 940 LIVE” (delete all other files), delete 940 LIVE, write for example : 700 with your name, close the file setconfig.txt
- delete the folders switchfiles.zip and switchfiles
5- Open the foder LoquendoTTS
Open the folder voice (downloaded), open the folder bin, delete the file libLoqTTS7.so, close the
folder bin, copy the contents of the folder and paste it in the folder LoquendoTTS, close the folder LoquendoTTS
6- Open the folder : SE_ttsystem.8.410.1218 (downloaded)
- Copy the file ttsystem and paste it in the root of your GO700
7- Open the folder suspend (downloaded), copy the file suspend.ogg and paste it in the root of your GO700
For those who do not have antenna RDS/TMC : Make a copy of the file suspend.ogg and paste it in the root of your GO700
Rename the file : Copy of suspend.ogg => TTPnPD
Open the file TTPnPD (with Notpad), delete the contents, close the file TTPnPD
8- Add the folders and files you want from your backup :
-Folders : art, audiobooks, contacts, helpme, itn, mp3, photos, raster, sounds, zip ...
-Files : antitheft.bmp, autorun.inf, splash.bmp, suspend.bmp, tomtom.ico ...
9- Install the map :
-Install the folder of your map (downloaded) to the root of your GO700
-Open the folder : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)
Double click on : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher
Double click on : RunMeforAllAutomatic.cmd
Select : 1 or follow the onscreen instructions
10- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)
11- Making various settings

For TTHome2 : I use the old method (I do not handle my GO700 with TTHome)
With XP :
Open the folder : SE_Navcore.8.410.1218.Basicpack (downloaded), open the folder Navcore.8.410.1218@ tomtom .com, copy the file 8-410-1218-1.dll
In C:\Documents and Settings\ ????????\Application Data\TomTom\HOME\Profiles\xxxxxxxx.default\extensi ons\Navcore.7.903.9183@tomtom.com (or other), I paste file 8-410-1218-1.dll, I note the file name .dll (7-903-9183-1.dll (or other)), I delete the file : 7-903-9183-1.dll (or other), and I rename file 8-410-1218-1.dll : 7-903-9183-1.dll (or other)
With Vista : C:\Users\????????\AppData\Roaming\TomTom\HOME\Prof iles\xxxxxxxx.default\extension\Navcore.7.........

:thanks::thanks::thanks:
Bonne route et merci TTuser:urtheman::urtheman:

grard31

Another great write-up, well done & rep to you.

Hey Grard31,
great work, however I've been waiting for your manual how to upgrade GO910 to 8.410 with original voices. Any additional suggestions?

Hey Grard31,
great work, however I've been waiting for your manual how to upgrade GO910 to 8.410 with original voices. Any additional suggestions?
Thank you BiggerDave

ghost2
It comes ...

grard31

Hey Grard31!

Great work.
AutoOn function while dock TT700 in holder working on this Navcore?
I'm tested Navcore 8.3 and must manualy switching power on.
In Navcore 7.9 AutoOn work fine.

Thanks for your answer. Sorry for my english.

I have posted my findings RE AutoOn feature in Navcore 8.410 + tomtom x10 here:

http://www.ipmart-forum.com/showpost.php?p=2569506&postcount=243

Hey Grard31!

... AutoOn function while dock TT700 in holder working on this Navcore?
I'm tested Navcore 8.3 and must manualy switching power on.
In Navcore 7.9 AutoOn work fine.

Thanks for your answer. Sorry for my english.

Hey Grard31!

Great work.
AutoOn function while dock TT700 in holder working on this Navcore?
I'm tested Navcore 8.3 and must manualy switching power on.
In Navcore 7.9 AutoOn work fine.

Thanks for your answer. Sorry for my english.
exenrb,

AutoOn function : no
But many functions that do not with navcore 7.903 :
TTS, ALG, ASR ...

grard31

Works fine !
OK for TTGO700 with WCE 825.2157 full.
Thank you !

my tomtom go700 not start with all cracked ttsystem
what can i do?

my tomtom go700 not start with all cracked ttsystem
what can i do?

It works for me and for others...

Have you followed the procedure ?

"with all cracked ttsystem" :confused: there is only one !...

grard31

My GO700 with SE_Navcore.8.410.1218


480332 480333

480334 480335

480336

grard31

have 2 go 300s with nav. 8.24 and 2gb na 825 map.is there anything different in the nav. 8.410 system that would be worth changing the navcore?

wow so precise and perfect for my GO 700!
thank you thank you!

have 2 go 300s with nav. 8.24 and 2gb na 825 map.is there anything different in the nav. 8.410 system that would be worth changing the navcore?
reggavegga,

Navcore 8410 requires less resources, you can try with your GO300
But especially with the GO700 of your father.:D

grard31

thanks grard31.so really there is no noticeable changes in the looks of nav 8.410 on the tt,it just frees up ram is this correct?mine only have 32mb ram right now 4.9mb free.or does it free up more than ram?

thanks grard31.so really there is no noticeable changes in the looks of nav 8.410 on the tt,it just frees up ram is this correct?mine only have 32mb ram right now 4.9mb free.or does it free up more than ram?

Yes, my GO700 :
with navcore 8.204 with folder Outsourced : free RAM /14 Mb
with navcore 8.410 without the folder Outsourced : free RAM /16 Mb

grard31

I install all files, and all working fine at now on my GO 520!

It's amazing!:yourock:

Thanks a lot, works on my TT GO710

Hi grard31
How to get the brown underground instead the blue one?

Salut grard31 (le toul...sain)
Auparavant, (navcore 8.204) j'avais les touches de couleur marron que je préférais. Mais avec le 8.410, j'ai la couleur bleue. Comment y remédier stp?

Hi grard31
How to get the brown underground instead the blue one?

Salut grard31 (le toul...sain)
Auparavant, (navcore 8.204) j'avais les touches de couleur marron que je préférais. Mais avec le 8.410, j'ai la couleur bleue. Comment y remédier stp?
vista00,

There is no solution for your request :D

grard31

Shut down the function TMC/RDS (Now the procedure is updated)

- For those who do not have antenna RDS/TMC : Make a copy of the file suspend.ogg and paste it in the root of your GO700
Rename the file: Copy of suspend.ogg => TTPnPD
Open the file TTPnPD (with Notpad), delete the contents, close the file TTPnPD
- Delete the files ttgo.bak, ttgo.bif, ttgo.ori
- Open the folder : SE_Navcore.8.410.1218.Basicpack (downloaded)
Unzip the folder switchfiles.zip, open the folder swichfiles, open the folder Config, copy the file version.txt and paste it in the root of your GO700
- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)

grard31

Installation SE_Navcore.8.410.1218.rev.1.2 for GO700 (with the voices x30)
Sorry for my English :sorry:
Download Jdownloader :
http://www.anonym.to/?http://jdownloader.org/download/index
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost.php?p=2566284&postcount=15
(By following the example, you have the folder ASR)

- Read :
http://www.ipmart-forum.com/showpost.php?p=2563628&postcount=1
- You should have the folder : ASR (20450368 bytes)
- Download :
http://www.anonym.to/?http://rapidshare.com/files/207488048/SE_Navcore.8.410.1218.Basicpack.rar
Extract the folder : SE_Navcore.8.410.1218.Basicpack
- Download :
http://www.anonym.to/?http://rapidshare.com/files/215275254/SE_ttsystem.8.410.1218.rev.1.2.rar
Extract the folder : SE_ttsystem.8.410.1218.rev.1.2
- Download the voice to use :
http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111
Extract the folder voice
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=450399&d=1227432495
Extract the folder suspend
- Download the map you want to use :
For map : Western_and_Central_ Europe 825.2157 or other countries
For map : North_America 825.2157
Maps located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337584
For map : Australia 815.2086
Map located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337608
Extract the map
- To activate the map, read and download : Easyusetools for Keygen Mapcheck Metacheck ttsystempatcher
http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58
Extract the folder Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher

Installation :
1- Save the contents of your GO700 in a safe place on your hard drive
2- Clear all the contents of your GO700
3- Copy the folder ASR paste it in the root of your GO700
Open the folder ASR, to limit the volume of ASR folder (20450368 bytes), keep only the necessary :
Example ASR in English : 7 files for 1247664 bytes => 6ENG.ctx, acmod3200_car_eng_F16_compact_lew4.dat, commandsENG.ctx, ddg2p_eng_vadvde_large_lew4.dat, digitsENG.ctx, Support_asr.dat, yes_no_ENG.ctx
Example ASR in French : 7 files for 1108492 bytes => 6FRF.ctx, acmod3200_car_frf_F16_compact_lew4.dat, commandsFRF.ctx, ddg2p_frf_vadvde_large_lew4.dat, digitsFRF.ctx, Support_asr.dat, yes_no_FRF.ctx
Example ASR in US : 8 files for 1871128 bytes => 6ENU.ctx, acmod3200_car_enu_2_5_compact_lew4.dat, acmod3200_car_enu_f16_compact_lew4.dat, commandsENU.ctx, ddg2p_enu_vadvde_large_lew4.dat, digitsENU.ctx, Support_asr.dat, yes_no_ENU.ctx
Close the folder ASR
4- Open the folder : SE_Navcore.8.410.1218.Basicpack (downloaded)
- Install SE_Navcore.8.410.1218.Basicpack contents of the folder to the root of your GO700 later :
- delete the folders ephem, Navcore.8.410.1218@ tomtom.com, Outsourced.8410 and the file readmenot.txt
- unzip the folder switchfiles.zip, open the folder swichfiles, open folder Config, copy files setconfig.txt, version.txt and paste them in the root of your GO700
- open the file setconfig.txt, keep only “runclean” and “changedtext:TomTom GO 940 LIVE” (delete all other files), delete 940 LIVE, write for example : 700 with your name, close the file setconfig.txt
- delete the folders switchfiles.zip and switchfiles
5- Open the foder LoquendoTTS
Open the folder voice (downloaded), open the folder bin, delete the file libLoqTTS7.so, close the
folder bin, copy the contents of the folder and paste it in the folder LoquendoTTS, close the folder LoquendoTTS
6- Open the folder : SE_ttsystem.8.410.1218.rev.1.2 (downloaded)
- Copy the file ttsystem and paste it in the root of your GO700
7- Open the folder suspend (downloaded), copy the file suspend.ogg and paste it in the root of your GO700
8- Add the folders and files you want from your backup :
-Folders : art, audiobooks, contacts, helpme, itn, mp3, photos, raster, sounds, zip ...
-Files : antitheft.bmp, autorun.inf, splash.bmp, suspend.bmp, tomtom.ico ...
9- Install the map :
-Install the folder of your map (downloaded) to the root of your GO700
-Open the folder : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)
Double click on : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher
Double click on : RunMeforAllAutomatic.cmd
Select : 1 or follow the onscreen instructions
10- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)
11- Making various settings

For TTHome2 : I use the old method (I do not handle my GO700 with TTHome)
With XP :
Open the folder : SE_Navcore.8.410.1218.Basicpack (downloaded), open the folder Navcore.8.410.1218@ tomtom .com, copy the file 8-410-1218-1.dll
In C:\Documents and Settings\ ????????\Application Data\TomTom\HOME\Profiles\xxxxxxxx.default\extensi ons\Navcore.7.903.9183@tomtom.com (or other), I paste file 8-410-1218-1.dll, I note the file name .dll (7-903-9183-1.dll (or other)), I delete the file : 7-903-9183-1.dll (or other), and I rename file 8-410-1218-1.dll : 7-903-9183-1.dll (or other)
With Vista : C:\Users\????????\AppData\Roaming\TomTom\HOME\Prof iles\xxxxxxxx.default\extension\Navcore.7.........
:thanks: :thanks:
Bonne route et merci TTuser :urtheman: :urtheman:
grard31

For those who have the rev1.1 :

- In your GO700, delete the files : ttgo.bak, ttgo.bif, ttgo.ori,TTPnPD (if you have) and ttsystem
- Open the folder : SE_ttsystem.8.410.1218.rev.1.2 (downloaded)
Copy the file ttsystem and paste it in the root of your GO700
- Open the folder : SE_Navcore.8.410.1218.Basicpack (downloaded), open the folder swichfiles, open the folder Config, copy the file version.txt and paste it in the root of your GO700
- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)

Now : Installation SE_Navcore.8.410.1218 rev1.2 for GO700 (with the voices x30)
Read here :
http://www.ipmart-forum.com/showpost.php?p=2599888&postcount=22

Thank you :wave:

grard31

Correct is to edit post #1
threads merged

Hi,

I don't understand how to buid folder ASR (newbe of mine).
Please, it seems I have a previous ASR folder since dec24th2008.
Can I use it ?
Thanks.

@+

Hi,

I don't understand how to buid folder ASR (newbe of mine).
Please, it seems I have a previous ASR folder since dec24th2008.
Can I use it ?
Thanks.

@+
9800xpv,

If the original size of ASR folder = 20450368 bytes : so it is good

Or => Download Jdownloader :
http://www.anonym.to/?http://jdownloader.org/download/index
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost.php?p=2566284&postcount=15
(By following the example, you have the folder ASR)


grard31

Hello grard31,

Thanks alot, really. I think I have the right one, as its size is exactly 20 450 368 .
I don't remember where I dl it :emptymind:

I hope it'll work.
Have a good day.
@+ ;)

Hi, I have followed the instructions and everything works ok except I now have no manage phones icon in menus and bluetooth is greyed out, how can I get these back please?

Thanks

Hi, I have followed the instructions and everything works ok except I now have no manage phones icon in menus and bluetooth is greyed out, how can I get these back please?

Thanks
rdlbooth,

For me the phone works. (GO700)
In mean Preferences 7 of 8 / Bluetooth preferences / Disable Bluetooth / Connect to Bluetooth device /.....

After, shut down then turn on the device for saving the configuration

grard31

Hi grard31, thanks for your reply, I can not access bluetooth preferences as the icon is greyed out, do I need to edit a config file to enable it? do you have an icon in your menus for managing phones? as I dont.

Thanks

QUOTE=rdlbooth;2617564]Hi grard31, thanks for your reply, I can not access bluetooth preferences as the icon is greyed out, do I need to edit a config file to enable it? do you have an icon in your menus for managing phones? as I dont.

Thanks[/QUOTE]
rdlbooth,

In file setconfig.txt => runclean and changedtext:TomTom...

487694 487695

487696 487697

grard31

Hi, I had changed the file setconfig.txt to the settings in your instructions already, my page 7 of 8 in preferences is different than yours, I have bluetooth prefences, enable wireless data, send/receive files, my TomTom account and battery saving preferences and all except the battery saving preferences icons are greyed out and cant be selected.

Regards

Les

Hi, I had changed the file setconfig.txt to the settings in your instructions already, my page 7 of 8 in preferences is different than yours, I have bluetooth prefences, enable wireless data, send/receive files, my TomTom account and battery saving preferences and all except the battery saving preferences icons are greyed out and cant be selected.

Regards

Les
rdlbooth,

You must repeat the procedure step by step.
I do not know what you did ...

grard31

Hi, I deleted the setconfig.txt file from the device and re-copied it back and all is ok now................!!!! thanks for your help

Hello Grard31

I've installed version 1.1 on my TomTom 500. Can you explain the difference between version 1.1 and 1.2 an why I should use 1.2 instead of 1.1?

:thanks:

Hello Grard31

I've installed version 1.1 on my TomTom 500. Can you explain the difference between version 1.1 and 1.2 an why I should use 1.2 instead of 1.1?

:thanks:
Binkiee,

The only difference is the solution provided by TTuser to remove the vertical bar to the right of the screen (RDS/TMC)

For those who have the rev1.1 :

- In your GO700, delete the files : ttgo.bak, ttgo.bif, ttgo.ori,TTPnPD (if you have) and ttsystem
- Open the folder : SE_ttsystem.8.410.1218.rev.1.2 (downloaded)
Copy the file ttsystem and paste it in the root of your GO700
- Open the folder : SE_Navcore.8.410.1218.Basicpack (downloaded), open the folder swichfiles, open the folder Config, copy the file version.txt and paste it in the root of your GO700
- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)

grard31

As always an excellent job of TTuser
:thanks: :thanks: :thanks:
For those who have SE_Navcore.8.410.1218 rev1.2

- Download :
http://www.anonym.to/?http://rapidshare.com/files/219731691/SE_Navcore.8.412.1236.Basicpack.rar
Extract the folder : SE_Navcore.8.412.1236.Basicpack
- Download :
http://www.anonym.to/?http://rapidshare.com/files/219737079/SE_ttsystem.8.412.1236.rar
- Extract the folder : SE_ttsystem.8.412.1236- Download :

Installation

1- In your GO700 : delete the folder bin, the files data.chk, data_im2.chk, data_is2.chk, data_lim.chk, PNDNavigator, ttgo.bak, ttgo.bif and ttsystem
2- Open the folder SE_Navcore.8.412.1236.Basicpack (downloaded)
- Copy the folder bin, the files data.chk, data_im2.chk, data_is2.chk, data_lim.chk, PNDNavigator and paste them in the root of your GO700
- Unzip the folder switchfiles.zip, open the folder swichfiles, open the folder Config, copy the file version.txt and paste it in the root of your GO700
3- Open the folder : SE_ttsystem.8.412.1236 (downloaded)
- Copy the file ttsystem and paste it in the root of your GO700
4- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)
5- Switch off and then turn on the GO700 to properly save the configuration
:urtheman: :urtheman: :urtheman: :urtheman:
grard31

Hello Grard31,

You're doing a great job by describing how to keep the TT700 up to date. I'm having a TT500 and use your instructions also to keep mine TT one up to date. I only have to take care that there are some differences between installing the software on a 500 instead of a 700 because of the memory limitations. Isn't possible for you to also describe the installation on a TT500 and then to make a sticky of this TT700/TT500 installation? If needed I will help you and can f.g. test the installation instructions on my TT500.

Binkiee

Hello Grard31,

You're doing a great job by describing how to keep the TT700 up to date. I'm having a TT500 and use your instructions also to keep mine TT one up to date. I only have to take care that there are some differences between installing the software on a 500 instead of a 700 because of the memory limitations. Isn't possible for you to also describe the installation on a TT500 and then to make a sticky of this TT700/TT500 installation? If needed I will help you and can f.g. test the installation instructions on my TT500.

Binkiee
Binkiee,

GO500 : ARM 920T processor is the same that GO700
GO500 : 32 MB RAM but GO700 64 MB RAM

- Bootloader : 5.5022 is for card SDHC => perfect for GO500
- Add the folder Outsourced.8410 (with navcore SE 8.410) or Outsourced.8412 (with navcore SE 8.412)
- Try, if TTS works perfect
- If not try with LoquendoTTS (voices x10): example EnglishGb – Kate with SE_Navcore.8.410 (with SE_Navcore.8.412 is the same)

- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=448965&d=1227044472
Extract the folder LoquendoTTS (1)
- Download the voice : EnglishGb - Kate
http://www.ipmart-forum.com/showthread.php?t=170022
Extract the folder : EnglishGb - Kate

- Delete the folder LoquendoTTS of yourGO500
- Install the folder LoquendoTTS (downloaded (1)) to the root of your GO500
- Open the folder LoquendoTTS (of your GO500)
Open the folder EnglishGb - Kate (downloaded), make a copy of the folder EnglishGb and paste it in the folder LoquendoTTS (of your GO500), close the folder LoquendoTTS
- Open the folder : SE_Navcore.8.410.1218.Basicpack, copy the folder LoquendoTTS and paste it in the root of your GO500 (all)

grard31

Hello,

J'ai tout fait, lors de la déconnection (ejecter sur windows vista), cela me met une croix rouge qui clignote.
Que faire?

Merci

Hello,

J'ai tout fait, lors de la déconnection (ejecter sur windows vista), cela me met une croix rouge qui clignote.
Que faire?

Merci

This is an English speaking forum.

Please translate & repost.

Hello,

J'ai tout fait, lors de la déconnection (ejecter sur windows vista), cela me met une croix rouge qui clignote.
Que faire?

Merci
timorelo,

Red cross flashing : it's missing the file ttsystem

grard31