Phoenix Service Software
Version 2009.04.011.37849

[Only registered and activated users can see links]


==================================================
Phoenix Service Software 2009.04.011.37849
==================================================

==================================================
Fresh Install
==================================================
1) Install msxml6_x86.msi (ignore if already installed on your system)
2) Install vcredist_x86.exe (ignore if already installed on your system)
3) Install Nokia_Connectivity_Cable_Driver.msi
4) Install Nokia_Flashing_Cable_Driver.msi
5) Install Nokia_Service_Tool_Drivers.msi
6) Install FLS-4Drv1.34.exe (Install this only if you are facing problem otherwise)
7) Install Phoenix_Service_Software.msi (Version 2009 )

This is a fixed release and dongle fix patch may not be required.
8. Fix Dongle by installing Phoenix_2006_2009_fixer.exe


==================================================
Upgrade
==================================================
1) Install FLS-4Drv1.34.exe (only if step 2 shows error)
2) Install Phoenix_Service_Software.msi (newer Version 2009 )
3) Fix Dongle by installing Phoenix_2006_2008_fixer.exe (only if it asks for dongle)


==================================================
Using Phoenix - quick walk through
==================================================
1) Run the program
2) Create User if it asks to.
3) Connection, select USB and apply it.
- Supports dead phones
- firmware downgrade (you need security card for that).
4) Connect phone, select scan product.
5) Get flashing!

==================================================
Full Visual guide is available here
==================================================
[Only registered and activated users can see links]



==================================================
Troubleshooting
==================================================
If you are having trouble installing phoenix fresh/upgrade
Because you have pc suite, nokia software updater etc installed or any other conflict

Do these steps and goto top^ Fresh install
==================================================
System Preparation
==================================================
- Uninstall Nokia PC Suite, Nokia Software Updater and any other Nokia Stuff.
- Uninstall Nokia Drivers like connectivity, flash cable, modem driver etc.
- Reboot PC.
- Clean temporary files and registry using your favourite software, if you don't have one get one ccleaner.com
- Reboot PC.


Once phoenix is installed, you can install Nokia stuff also.


==================================================
To download firmware files from nokia
==================================================

Run phoenix > goto Tools > Image file download

Enter your product code.


==================================================
Release 28 March, 2009.
==================================================


[Only registered and activated users can see links]

Thanks, Still can't USB flash a dead n95 though can it!!! - maybe one day

Thanks, Still can't USB flash a dead n95 though can it!!! - maybe one day

why not?
check in "dead phone usb flashing" and install the N95 latest firmware,

do not forget to connect the phone in "No Connection" mode.

Go to File-->manage connection Select "No Conection" --> Save--> Apply

thnks
this shareware
or full
thnks anyway

Full version bro, follow the installation guide and it should work for you.

why not?
check in "dead phone usb flashing" and install the N95 latest firmware,

do not forget to connect the phone in "No Connection" mode.

Go to File-->manage connection Select "No Conection" --> Save--> Apply

mmmm, I have tried this many times with phoenix (2008) and the J.A.F software (no box or F-bus). I think some people have been successful because their n95 is not 'fully dead'. Mine was killed by NSU and now the USB port will not wake up to receive any information.

But it still doens't reconize the Nokia N79 and the N85. I only see "RM-348".
The same problem with NSS.

But Thanks for Sharing!

is there any support for vista users?

where is the Phoenix_2006_2009_fixer.exe file?

thx

Hi!
When I Falshing my phone (E51) with Phoenix I will lost the warranty?
The phone is only 2 mounth old.

Could it be possible to share this with any free server other than Rapidshare? From my country I cannot download it from Rapidshare, because I don't have an account with Rapidshare and it limits the downloads with kbytes. PLEASE.

thanks for sharing. good post!!!

Phoenix_Service_Software_2009.04.011.37849
Where is password for rar file yaar... :(

@eben0
Not sure about Vista compatibility, but feel free to try it and post results.
Phoenix_2006_2009_fixer.exe as well as all the exe/msi files are generally compressed into one installer (at least that's how it worked for all previous versions; I haven't tested this yet).

@cnckane
If you keep on using the same product code, then you should be fine.
If you change it, then your warranty may or may not be valid (if you take the phone for repairs after changing product code, they may or may not check that out. If they do, then most likely they won't honor the warranty). It's always up to Nokia Care (Service Center).

@tahasmarty
I doubt it has a password (no one else complained and there's no password in OP).
I'd say you try downloading the file again. If you still experience the same, try the newest version (which I can tell you for sure: it requires no password):
[Only registered and activated users can see links]

BR,
pool7

thnx for ta share bro...!!!...

can i dwngrde my 5320 fw from 4.13 to 3.08 using this sftwr .plz help

how to change product code N5800...it says error on NSS..on J.A.F says nothing if it success or no...in Phoenix...the result is error...

Would you please upload the Phonix on other site. I have problem with RS.

SABAHAN08:36 30th May 2009how to change product code N5800...it says error on NSS..on J.A.F says nothing if it success or no...in Phoenix...the result is error...
I'm also having the Same Problem..
But in My N73 ME
Posted via Mobile Device