SEND YOUR EMAIL, GET YOUR KEY

Iconsoft Phone Extension - Release History

Version 1.4.5 (June 06, 2009):
PhonEx Today plug-in work improved
Enabled Phonepad during a call
Memory use decreased
Faster T9 search
Fixed drop-down menu behavior in PhonExToday plug-in
Contact initialization fixed
Fixed change of the type of number displayed in Phonepad and Contacts
Fixed work with Incoming Call window
Improved application stability when installed on Memory Card
Improved on/off toggle for GPRS/EDGE/3G/HSDPA
Improved auto off of defice after a missed call (when device off)
SIP displayed (Soft Input Panel) during incoming call and afterwards (on certain devices)
Same duration of vibra for connection/disconnection/busy
Fixed incorrect ringtone play after change of profile from silent/vibra to any other
and more!


SEND YOUR EMAIL, GET YOUR KEY

Download:
Iconsoft Phonex v 1.4.5 ([Only registered and activated users can see links])

SEND YOUR EMAIL, GET YOUR KEY

Any screenshots of it, mate?

[Only registered and activated users can see links] screenshots

so does this one work well

or gives registration problem like : [Only registered and activated users can see links]

the RC2 version ????

Please, anyone Know if has registration problems when connects to Internet?

So far so good. Hope I didnt speak too soon but no registration problems since this morning. Had v1.2 installed since the 1.3 and 1.3RC2 gave me registration issues. I uninstalled 1.2, deleted the registry key mentioned in the other posts, and soft reset a few times after using Memaid to clean memory and registry files. Installed 1.35 and reset. Didnt even ask for a registration code said it was already registered. Hope it stays that way! Ill repost if anything changes.

Please, anyone Know if has registration problems when connects to Internet?

Did not ask me for registration code........


not till now.........

Hope this works. Installed last night and so far so good. Thanks so much

Hope this works. Installed last night and so far so good. Thanks so much
For me it never asked for the serial unlike the previous versions. When you go to install this version, it will always want to remove the previous version and then reboot. Once it reboots simply go into the registry to delete the reg folder and then install this cracked 1.3.5 cab and it shouldnt ask for a serial at all. Mines now working great, thanks again.
Ps. The hard key answer problem i had with SPB mobile shell and v1.3 has been fixed by v1.3.5 as i know a few others had this problem as well.

Out of the blues my phonex software turned trial

and the about section is still showing it to be a registered version....


This is what i`m getting

[Only registered and activated users can see links] [Only registered and activated users can see links]

See the watermarks of trial version.....

can some one upload it to the forum? unable to download from rapidshare.

thanks.

if u are getting trial, means u have installed it b4 and now u are over lapping it with this version

u need 2 delete a registry key, but i forgot which 1

btw

WM5 version please

forum version please instead of rapidshare :P

File Uploaded..............

aww man ,i thought a WM5 version :P

im using the WM5 version, superb and very responsive

if u are getting trial, means u have installed it b4 and now u are over lapping it with this version

u need 2 delete a registry key, but i forgot which 1

btw

WM5 version please

forum version please instead of rapidshare :P

I Hard formatted my Mobile before i installed this version...........

jcsy
Not able to upload tell me which filehost you want i will upload there if this help ;)

Mirror please.unable to DL from rapidshare

Download from Ipmart server
File been uploaded

All is good with the install, however the new themes group QVGA with WQVGA. I have an Omnia which is 240x400, and all menus look good except the in-call menus, which are clearly sized for QVGA. This causes them to be too short / small for the taller 400 resolution. :(

jcsy
Not able to upload tell me which filehost you want i will upload there if this help ;)

i can download from FORUMS, many thanks

rapidshare is a pain for my country sometimes :(

Out of the blues my phonex software turned trial

and the about section is still showing it to be a registered version....


This is what i`m getting

[Only registered and activated users can see links] [Only registered and activated users can see links]

See the watermarks of trial version.....

Did you update on previous version?
It's better to uninstall the previous version, and remove any registry entries of Phonex. Now install the latest version of V1.3.5, i guess this will work for you.

Ive installed it on both omnia and xperia and everything works fine. I removed registry entries first and made a fresh install and got everything working. Thank you so much. Tried all versions here but this version surely works great for me.

Mediafire mirror added...

[Only registered and activated users can see links]

Did you update on previous version?
It's better to uninstall the previous version, and remove any registry entries of Phonex. Now install the latest version of V1.3.5, i guess this will work for you.


I installed it after i hard-resetted my fone..........

why dont someone upload in ipmart server?

thanx for mirror

aww man ,i thought a WM5 version :P

im using the WM5 version, superb and very responsive

WM5 version on rapidshare ..please !!

[Update] Few days now and havent had it ask for registration yet but my i760 has been freezing up alot more lately. Thinking about going back to v1.2.

It showed me the trial watermark, so i un installed, cleaned the reg enties and re installed again... Hope it works....

It showed me the trial watermark, so i un installed, cleaned the reg enties and re installed again... Hope it works....

did the same 3 times and again and again - SAME RESULT........

^ LOL nothing for me yet.... Guess will have to switch to Inesoft Phone if this persists

[Update] Few days now and havent had it ask for registration yet but my i760 has been freezing up alot more lately. Thinking about going back to v1.2.

Strange but i think i got the same problem than you.
I desinstalled v1.35, cleared the reg key and reisntalled v1.2 and everything seems to be allright again.
Maybe in version 1.4.....

It's working fine with my i900 Samsung Omnia. =)

at first week it was working.now it does not work anymore.it turns trial.so i turned back to resco :-).i am waiting for proper cracked version.cheers

It's working fine with my HTC Cruise for two days. Thanks.

Hi!

I'm new guy here, where i found the wm5 version?

thanks:

here
[Only registered and activated users can see links]
and here
[Only registered and activated users can see links]

Thank you, Monkeynet:yourock:

Ahh, turned into a trial version after 3 days. Thanks anyways!

Had a weird issue with the software before it turned into a trial. It would just show "Unknown" for random callers, so I assumed it was a blocked caller. As soon as I pressed the answer button, I would immediately see the callerid come up on the call status screen. Odd.

Mirror please.unable to DL from rapidshare

Uploaded to Mediafire also...if not please let me know your feasible mirror site, i will try to upload in to that too :)

here
[Only registered and activated users can see links]
and here
[Only registered and activated users can see links]

thanks for WM5 version

delete 'HKEY_CLASSES_ROOT\CLSID\{848F3933-7685-4798-AB8E-88B313651093}\Reg' key in your registry.) after make soft reset, and register with any mail & key

Working with my HTC Touch P3450 since the 2nd April, no probs. I had 1.2 installed after 1.3 had a few bugs. I then:
1. uninstalled 1.2 using memmaid
2. soft reset
3. deleted the reg in HKEY_CLASSES_ROOT\CLSID\{848F3933-7685-4798-AB8E-88B313651093}\Reg
4. installed 1.3.5
5. soft reset and then it worked, didnt even ask for serial, said the version was registered already.
[Only registered and activated users can see links]

Can some one please guide me how to get to the registry please.
I have an HTC & twice my phone became trial version after installing version 1.3 and 1.35.

open registry with any registry editor, such as Resco Registry, SmartReg ([Only registered and activated users can see links]) or freeware CeRegEditor ([Only registered and activated users can see links]), then find and delete proper key

works fine on my omnia :) thx :)
my question is is it possible to choose keyboard ? sometimess i need original samsung omnia phone keyboard for service codes ... :( how can i change it to samsung keyboard and back ?

Hi anyone,

after installation, the bluetooth logo gone missing from the task bar when i on it. It is not indicating that the bluetooth is on. i am using a HTC HD, can someone help me on this.
thanks

i installed WM5 1.35, couldnt start the app

so i reverted back down to WM5 1.30

just a heads up for those on WM5

Hi it seem that on my HTC HD, holding the phonepad key to open the second level for the bluetooth and wifi is also not working!

Please help me!

I've a Asus P525 with WM5 and the 1.3.5 doesn't work.
After the installation if I click any icon (favorites or contacts etc. except messages) popup the about screen!

Thanks,

Jotee

i believe this is because of the plug in that includes the bluetooth and wifi, but it seem that the wifi logo will still be there if on, but not the bluetooth

any help is deeply appreciated

Please help me!

I've a Asus P525 with WM5 and the 1.3.5 doesn't work.
After the installation if I click any icon (favorites or contacts etc. except messages) popup the about screen!

Thanks,

Jotee

same problem as i was mentioning earlier

open registry with any registry editor, such as Resco Registry, SmartReg ([Only registered and activated users can see links]) or freeware CeRegEditor ([Only registered and activated users can see links]), then find and delete proper key

Thanks Mr. Mnet, it worked for me, will wait to see if water marks come back
:D Cheers

Hi JCSY!

Could you post me the link of the working 1.3 WM5?
Because I've got only the 1.2 version!!!

Thanks

i have omnia greek varsion but i cant install iconsoft extension v1.35.it say its not compatible with this phone.any
body knows about that?

Is this version fully cracked?
I did a clean install (no previous version) on an Omnia i900.
It has run perfectly, never asking for registration and showing as registered from the outset.
Yesterday I pressed a recall number from the calls list and quickly got a recorded message saying I had dialled an incorrect number.
Instantly the Trial watermark came on. I pressed the same recall number again and it dialled correctly. The program was still showing as registered. I turn the phone off overnight and powering up this morning the watermark is gone.
Does this program actually "phone home" rather than connecting via the internet?
Also, the watermark remains static through all the screens, so is the watermark image something which can be found in the file system and got rid of? Or perhaps a bit of coding to stop it being called up.
I'm not skilled in any way regards programming so can only report on my experiences.

Is this version fully cracked?
I did a clean install (no previous version) on an Omnia i900.
It has run perfectly, never asking for registration and showing as registered from the outset.
Yesterday I pressed a recall number from the calls list and quickly got a recorded message saying I had dialled an incorrect number.
Instantly the Trial watermark came on. I pressed the same recall number again and it dialled correctly. The program was still showing as registered. I turn the phone off overnight and powering up this morning the watermark is gone.
Does this program actually "phone home" rather than connecting via the internet?
Also, the watermark remains static through all the screens, so is the watermark image something which can be found in the file system and got rid of? Or perhaps a bit of coding to stop it being called up.
I'm not skilled in any way regards programming so can only report on my experiences.

Excactly the same problem here (although I not sure about this dailing an incorrect number).
I deleted the registry key as mentioned in earlier posts, but now (of course, stupid of me) the app is back to unregistered. So this doesn't solve the problem either.
Anybody got a brilliant hint?

after installing this and trying to register by deleting the reg key, it was not successful so i uninstalled it. and now my backlight on my screen flickers and wont stay lit for longer then 2 seconds unless i touch it. also my keyboard backlight doesnt work any more. i use a sprint mogul (ppc6800) and would really like for these things to work again (as before i installed the phone extension program) . any one have any ideas or have seen this before? thanks :(

-update : got it working again, just checked then unchecked option in backlight setting for time while on battery to my usual setting.

after installing this and trying to register by deleting the reg key, it was not successful so i uninstalled it. and now my backlight on my screen flickers and wont stay lit for longer then 2 seconds unless i touch it. also my keyboard backlight doesnt work any more. i use a sprint mogul (ppc6800) and would really like for these things to work again (as before i installed the phone extension program) . any one have any ideas or have seen this before? thanks :(


Although this program is fun to use but it's either not cracked properly or may have originally bugs in it which will clear in due times in future releases...

Here is the V1.30 on WM5 on rapidshare

6Mb

[Only registered and activated users can see links]

after installing this and trying to register by deleting the reg key, it was not successful so i uninstalled it. and now my backlight on my screen flickers and wont stay lit for longer then 2 seconds unless i touch it. also my keyboard backlight doesnt work any more. i use a sprint mogul (ppc6800) and would really like for these things to work again (as before i installed the phone extension program) . any one have any ideas or have seen this before? thanks :(

-update : got it working again, just checked then unchecked option in backlight setting for time while on battery to my usual setting.

You mentioned you installed 1.3.5 then tried to delete the reg key. For me i had 1.2 installed so i uninstalled this, soft reset and the reg folder still remains so i deleted it PRIOR to installing 1.3.5 and then it worked for me, it became registered without a serial so hopefully this may work for you like me.
As for the backlight feature, mine had a similar bug well before Phonex, for some reason it would go to the lowest setting, almost black and i would have to manually put the brightness up again. Touchwood it hasnt done this in ages but cant see how Phonex would disturbe this, hopefully just co-incidence.

+1

If an older version than 1.35 is installed, just desinstall it, delete the reg key, and perform a soft reset.

Verify if reg key is dead after ppc has rebooted (it might be), then install new version.

fix trial watermark by boot ur Cell

Thanks, jcsy!

I hope it will work...

fix trial watermark by boot ur Cell

Could you explain what you mean by this please.

Could you explain what you mean by this please.

Soft rest your PPC after installing :D

Is there a better crack? This app is very nice on the Touch HD...

Soft rest your PPC after installing :D

Today out of the blue mine installed for the last 3/4 days worked fine but suddenly gave "Trial" water marks..... so instead of uninstalling or registry tweaks I just soft re-setted the device and Horray water marks gone....):

Today out of the blue mine installed for the last 3/4 days worked fine but suddenly gave "Trial" water marks..... so instead of uninstalling or registry tweaks I just soft re-setted the device and Horray water marks gone....):

Yeah unfortunately there are still bugs in the version. For me no water mark issues but every few days the nice interface it uses for incoming/outgoing calls reverts back to the standard crappy looking one. Then when you use the X button to close the app, it opens Phonex (bloody weird) so still got bugs to iron out.

Yeh you are right ... still needs a few quick ver. releases...:nod:

Yeh you are right ... still needs a few quick ver. releases...:nod:

Iconsoft replied email me today advising a new updated version will be released mid next week so approx the 15th of April that will adress this and a few other bugs.

Thank God .. I hope it comes out on time... no delays... :D

Thank God .. I hope it comes out on time... no delays... :D

Yeah i reckon they will be on time. Last time they told me an update was coming on the Thursday which was the 2nd of April and they were spot on, thats when it was released so hopefully they are on time again:D

Pffffff.... useless version....

this is not a final release of the last version.

the 1.2 version stills the best

-_-_- be patient guyZ -_-_-

Sorry for the inconvence, will come back with the right file.

Foruall
take your time !!

I wonder if anyone is using iconsoft phonex along with slide to unlock, and if they re having any problems??

Coz I have a problem with S2U2 and phonex... :hardcry:

whenevr i get a call, the iconsoft phonex caller id pops up too, but i am neither able to slide unlock or attend the call from phonex caller id...

neither screen is displayed properly and i have to use the hardkeys to attend call...

is there a way to disable s2u2 during an incoming call?

Thanks..

Edit: I don wanna disble the iconsoft phonex caller id, and am using a touch 3g jade

Of course. Just disable CallerID in S2U2 settings

How can i change the interface on french language ????
Please.:hardcry::hardcry:

AFAIK currently only English and Russian are supported

Of course. Just disable CallerID in S2U2 settings
i never enabled s2u2 caller id in the first place :confused:

i never enabled s2u2 caller id in the first place :confused:

Which s2u2 and phonex versions?
And what exactly is being displayed when you receive the phonecall?

s2u2 1.62 and phonex 1.35 both latest,

I first see the phonex dialer, then s2u2 screen and then half dialer half slide screen lol... then touch screen does not respond till i attend call or disconnect it

hello and thanks for the app.
I've installed it on my omnia but the image of any contact that calls me is pixelised. Is there any solution for that???
:thanks:

New version is available, enjoy....I have the registration key...plz rep with your e-mail id

Hi foruall,

Just PM you and send you my email. Appreciate if you can send me the key.

Thanks in advance.

Edit : You said email you our email ID and you will give the key, so when are you going to send to me?

Cheers.

Danny

New version is available, enjoy....I have the registration key...plz rep with your e-mail id


hi,
i have also sent you my e mail id .

hope to have an early response from you.

thanks..

:thanks: