Installation SE_Navcore.8.412.1236.rev1.1 for GO700 (with the voices x30)
Sorry for my English :sorry:
Download Jdownloader :
http://www.anonym.to/?http://jdownloader.org/download/index
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost.php?p=2566284&postcount=15
(By following the example, you have the folder ASR)

- Read :
http://www.ipmart-forum.com/showpost.php?p=2625156&postcount=1
- You should have the folder : ASR (20450368 bytes)
- Download :
http://www.anonym.to/?http://rapidshare.com/files/219731691/SE_Navcore.8.412.1236.Basicpack.rar
Extract the folder : SE_Navcore.8.412.1236.Basicpack
- Download :
http://www.anonym.to/?http://rapidshare.com/files/225131080/SE_ttsystem.8.412.1236.rev1.1.rar
Extract the folder : SE_ttsystem.8.412.1236.rev1.1
- Download the voice to use :
http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111
Extract the folder voice
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=450399&d=1227432495
Extract the folder suspend
- Download the map you want to use :
For map : Western_and_Central_ Europe 825.2157 or other countries
For map : North_America 825.2157
Maps located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337584
For map : Australia 815.2086
Map located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337608
Extract the map
- To activate the map, read and download : Easyusetools for Keygen Mapcheck Metacheck ttsystempatcher
http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58
Extract the folder Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher

Installation :
1- Save the contents of your GO700 in a safe place on your hard drive
2- Clear all the contents of your GO700
3- Copy the folder ASR paste it in the root of your GO700
Open the folder ASR, to limit the volume of ASR folder (20450368 bytes), keep only the necessary :
Example ASR in English : 7 files for 1247664 bytes => 6ENG.ctx, acmod3200_car_eng_F16_compact_lew4.dat, commandsENG.ctx, ddg2p_eng_vadvde_large_lew4.dat, digitsENG.ctx, Support_asr.dat, yes_no_ENG.ctx
Example ASR in French : 7 files for 1108492 bytes => 6FRF.ctx, acmod3200_car_frf_F16_compact_lew4.dat, commandsFRF.ctx, ddg2p_frf_vadvde_large_lew4.dat, digitsFRF.ctx, Support_asr.dat, yes_no_FRF.ctx
Example ASR in US : 8 files for 1871128 bytes => 6ENU.ctx, acmod3200_car_enu_2_5_compact_lew4.dat, acmod3200_car_enu_f16_compact_lew4.dat, commandsENU.ctx, ddg2p_enu_vadvde_large_lew4.dat, digitsENU.ctx, Support_asr.dat, yes_no_ENU.ctx
Close the folder ASR
4- Open the folder : SE_Navcore.8.412.1236.Basicpack (downloaded)
- Install SE_Navcore.8.412.1236.Basicpack contents of the folder to the root of your GO700 later :
- delete the folders ephem, Navcore.8.412.1236@ tomtom.com, Outsourced.8412 and the file system5.5128
- unzip the folder switchfiles.zip, open the folder swichfiles, open folder Config, copy files setconfig.txt, version.txt and paste them in the root of your GO700
- open the file setconfig.txt, keep only “runclean” and “changedtext:TomTom GO 940 LIVE” (delete all other files), delete 940 LIVE, write for example : 700 with your name, close the file setconfig.txt
- delete the folders switchfiles.zip and switchfiles
5- Open the foder LoquendoTTS
Open the folder voice (downloaded), open the folder bin, delete the file libLoqTTS7.so, close the
folder bin, copy the contents of the folder and paste it in the folder LoquendoTTS, close the folder LoquendoTTS
6- Open the folder : SE_ttsystem.8.412.1236.rev1.1 (downloaded)
- Copy the file ttsystem and paste it in the root of your GO700
7- Open the folder suspend (downloaded), copy the file suspend.ogg and paste it in the root of your GO700
8- Add the folders and files you want from your backup :
-Folders : art, audiobooks, contacts, helpme, itn, mp3, photos, raster, sounds, zip ...
-Files : antitheft.bmp, autorun.inf, splash.bmp, suspend.bmp, tomtom.ico ...
9- Install the map :
-Install the folder of your map (downloaded) to the root of your GO700
-Open the folder : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)
Double click on : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher
Double click on : RunMeforAllAutomatic.cmd
Select : 1 then 1 and follow the onscreen instructions
10- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)
11- Making various settings
12- Switch off and then turn on the GO700 to properly save the configuration

For TTHome2 : I use the old method (I do not handle my GO700 with TTHome)
With XP :
Open the folder : SE_Navcore.8.412.1236.Basicpack (downloaded), open the folder Navcore.8.412.1236@ tomtom .com, copy the file 8-412-1236-1.dll
In C:\Documents and Settings\ ????????\Application Data\TomTom\HOME\Profiles\xxxxxxxx.default\extensi ons\Navcore.7.903.9183@tomtom.com (or other), I paste file 8-412-1236-1.dll, I note the file name .dll (7-903-9183-1.dll (or other)), I delete the file : 7-903-9183-1.dll (or other), and I rename file 8-412-1236-1.dll : 7-903-9183-1.dll (or other)
With Vista : C:\Users\????????\AppData\Roaming\TomTom\HOME\Prof iles\xxxxxxxx.default\extension\Navcore.7.........
:thanks: :thanks: :thanks:
Bonne route et merci TTuser :urtheman: :urtheman: :urtheman:

grard31

Any idea if this will work on a Go500 ?

Any idea if this will work on a Go500 ?
Spark1e,

Read here :
http://www.ipmart-forum.com/showpost.php?p=2626027&postcount=39

grard31

Hi,

Thank you to everyone who provides all the information and download resources on this forum! A special thanks to grard31 for writing this how to.

I have successfully updated my GO 700 from Navcore 5.201, map v567 to Navcore 8.412.1236, map v825.2157 without having to ask a question! Wow - what a difference this made to this device:egdance:

Now that I have finished this process, I have come up with a question. I used "Dave's" voice as it was the only english US male listed on the link provided above.

Is there something I can download and extract the approriate files to make a "Richard" voice pack?

:thanks:

Hi,

Thank you to everyone who provides all the information and download resources on this forum! A special thanks to grard31 for writing this how to.

I have successfully updated my GO 700 from Navcore 5.201, map v567 to Navcore 8.412.1236, map v825.2157 without having to ask a question! Wow - what a difference this made to this device:egdance:

Now that I have finished this process, I have come up with a question. I used "Dave's" voice as it was the only english US male listed on the link provided above.

Is there something I can download and extract the approriate files to make a "Richard" voice pack?

:thanks:
SHO_GuN,

Yes only Dave, is available (voice of a computer)

grard31

hi grard, do u have gprs connection along with Navcore 8.412 installation? TIA

likung :ninja:

hi grard, do u have gprs connection along with Navcore 8.412 installation? TIA

likung :ninja:
likungfei,

I have no GPRS subscription, but I think that not

grard31

For those who have SE_Navcore.8.412.1236.rev.1

- Download :
http://www.anonym.to/?http://rapidshare.com/files/225131080/SE_ttsystem.8.412.1236.rev1.1.rar
Extract the folder : SE_ttsystem.8.412.1236.rev1.1

Installation

1- In your GO700 : delete the files ttgo.bak, ttgo.bif, ttgo.ori and ttsystem
2- Open the folder SE_Navcore.8.412.1236.Basicpack (downloaded)
- Unzip the folder switchfiles.zip, open the folder swichfiles, open the folder Config, copy the file version.txt and paste it in the root of your GO700
3- Open the folder : SE_ttsystem.8.412.1236.rev1.1 (downloaded)
- Copy the file ttsystem and paste it in the root of your GO700
4- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)
5- Switch off and then turn on the GO700 to properly save the configuration

I was able to download and upgrade my tomtom 700 to navcore8.412.1236 and North america maps 8.25. I just cant get the spoke address and spoken address dialog buttons to work. They are both grey. On the main screen i'm able to speak commands. Please help.

I was able to download and upgrade my tomtom 700 to navcore8.412.1236 and North america maps 8.25. I just cant get the spoke address and spoken address dialog buttons to work. They are both grey. On the main screen i'm able to speak commands. Please help.
drvvb,

You have the folder ASR in the root ? (ASR in US : 8 files for 1871128 bytes)

Caution : voice commands with the GO700 => go to an address not working, the other commands works

grard31

Yes I do...Thats what confuses me the most. I just dont see what i'm doing wrong. I have ASR as a folder in the root. Should I take the contents out of the ASR folder and place them in the root?


"Caution : voice commands with the GO700 => go to an address not working, the other commands works"
Does this mean we cant use the spoken address function?

Yes I do...Thats what confuses me the most. I just dont see what i'm doing wrong. I have ASR as a folder in the root. Should I take the contents out of the ASR folder and place them in the root?
No : folder ASR with 8 files inside
What map do you use ?

"Caution : voice commands with the GO700 => go to an address not working, the other commands works"
Does this mean we cant use the spoken address function?
Yes => since navcore 7.221

Well all the other commands are working then. I just couldnt use the spoken address or spoken address dialogue keys that are found after pressing navigate to button and address. I thought we would be able to use them. My map is north america 825v2157

Well all the other commands are working then. I just couldnt use the spoken address or spoken address dialogue keys that are found after pressing navigate to button and address. I thought we would be able to use them. My map is north america 825v2157
drvvb,

OK for the map
You have the microphone on the navigation screen ?
As : http://www.ipmart-forum.com/showpost.php?p=2574033&postcount=11
Your language : English US ?

grard31

Yes I Have the microphone on the main screen. I just can figure out how to make it select an address, or choose to drive to a certain location with my voice. Is that possible ? or do I have to use it only for lower the volume, stuff like that. my laguage is english US

Yes I Have the microphone on the main screen. I just can figure out how to make it select an address, or choose to drive to a certain location with my voice. Is that possible ? or do I have to use it only for lower the volume, stuff like that. my laguage is english US
drvvb,

Yes, just go to an address does not work (for go to an address you have the keyboard)

grard31

Hi,

I have a x10. I asked this question in the original 8.412.1236 thread but seems that nobody has a solution.

When unit is off:

1) If SD card is removed, after 1 minute, unit turns on.

OR

2) When unit is placed in home charger/cradle, after 1 minute unit turns on.

WHAT IS GOING ON? THIS IS A REALLY BAD BUG.

Hi,

I have a x10. I asked this question in the original 8.412.1236 thread but seems that nobody has a solution.

When unit is off:

1) If SD card is removed, after 1 minute, unit turns on.

OR

2) When unit is placed in home charger/cradle, after 1 minute unit turns on.

WHAT IS GOING ON? THIS IS A REALLY BAD BUG.
joepoppa,

1) I have only GO700 and GO910 (no SD card)
2) For GO700 : no problem
For GO910 read here :http://www.ipmart-forum.com/showpost.php?p=2625372&postcount=1
Caution : when you switch off the GO910 and put it on the cradle, after 45 – 50 seconds it automatically restart and connect to your computer

grard31

joepoppa,

1) I have only GO700 and GO910 (no SD card)
2) For GO700 : no problem
For GO910 read here :http://www.ipmart-forum.com/showpost.php?p=2625372&postcount=1
Caution : when you switch off the GO910 and put it on the cradle, after 45 – 50 seconds it automatically restart and connect to your computer

grard31

Thanks for the response grard31. Do you know why unit reboots after 45-50 sec? I have that problem (which is the same as #2 in my initial post).

It means that the software has crashed, there is a watchdog (failsafe hardware) that will detect if the software has stopped working after 30-40 seconds and automatically reboot.

It means that the software has crashed, there is a watchdog (failsafe hardware) that will detect if the software has stopped working after 30-40 seconds and automatically reboot.
ianc60,

I agree with you but I can live with

grard31

Ianc60
Does your modification of ttsystem of NC 8.412 solve the problem?

why not working on go630.

why not working on go630.
agaam,

I do not know.
Each device is a special case.
The procedure is for the GO700.

grard31

Hi ! What news with 8.412 ? i have NAv 8.410 on my Go 700 , all is ok and it don't freeze
is it better than 8.410 ?
thanks

Hi ! What news with 8.412 ? i have NAv 8.410 on my Go 700 , all is ok and it don't freeze
is it better than 8.410 ?
thanks
dalton01,

For GO700: no significant change, but this is the last

grard31

Thanks for all of this information. Can anyone answer a few questions:

1) I am running the latest official navcore for the go700. Aside from the spoken street names (TTS) is there any advantage to upgrading to an unofficial 8.x navcore?

2) Does anyone have tips for getting better voice quality when paired with a bluetooth phone? I can hear people OK, but they can never hear me well. I even tried the tomtom external microphone, but it did not seem to help much so I returned it.

Thanks

DonC

Thanks for all of this information. Can anyone answer a few questions:

1) I am running the latest official navcore for the go700. Aside from the spoken street names (TTS) is there any advantage to upgrading to an unofficial 8.x navcore?

2) Does anyone have tips for getting better voice quality when paired with a bluetooth phone? I can hear people OK, but they can never hear me well. I even tried the tomtom external microphone, but it did not seem to help much so I returned it.

Thanks

DonC
donc,

Yes, to use the maps more complete : TTS, IQ Routes, ALG
With navcore 8.412 : Mp3 player, photos, car icon, helpme...
The easiest way is to try

grard31

donc,

Yes, to use the maps more complete : TTS, IQ Routes, ALG
With navcore 8.412 : Mp3 player, photos, car icon, helpme...
The easiest way is to try

grard31

Thanks for the Info. I did the upgrade but am having bluetooth prolems and I don't like the fact that the GPS no longer switches on with the car.

What I really would like is the standard navcore, just modified to run the Loquendo TTS maps.

Thanks for any help.

I have a couple of questions, for the longest time I had nav core 8.412.1236 on my go700.
1) For a while it was working wonderfully, now it seems like it has real trouble picking up satellite signal. Is there a way to make it work with quick fix GPS? Is that the problem?

2)How do I make it work with tom tom home? is that possible?

I have a couple of questions, for the longest time I had nav core 8.412.1236 on my go700.
1) For a while it was working wonderfully, now it seems like it has real trouble picking up satellite signal. Is there a way to make it work with quick fix GPS? Is that the problem?

2)How do I make it work with tom tom home? is that possible?

I don't think picking up sat signals is effected by different navcore and you should patch your TTHome .dll (do a quick search on the "tools")

I have patched TomTom home however it says that there is an error and that I am using the wrong version of the software. It does let me download updates fo maps but no, quick fix..i'm very confused. Help?

I have patched TomTom home however it says that there is an error and that I am using the wrong version of the software. It does let me download updates fo maps but no, quick fix..i'm very confused. Help?
drvvb,

- With the GO700, the folder ephem (QuickGPSFix) is not usable
- Before starting TTHome, check : In the file ttgo.bif : ApplicationVersionVersionNumber=7903 => if yes : OK
If no : delete the file ttgo.bif, copy the file ttgo.bak paste it in the root of your GO700, remame the copied file ttgo.bak => ttgo.bif

grard31

ok so I take that gps quickfix will never work on the tomtom 700. The other question I have for you is why is it taking so long to find satellites. It was doing this once a long time a ago and then I went on a long trip and it got better. Is there anyway it will get better? Anyone have solutions?

voice input can not regnized...

i have the microphone in the screen and TTS is working. But when i say phone, or call, or any other command, the tomtom go 700 does not response after i click the microphone.

any idea? the size of ASR folder is correct too

Installation SE_Navcore.8.412.1236.rev1.1 for GO700 (with the voices x30)
Sorry for my English :sorry:
Download Jdownloader :
http://www.anonym.to/?http://jdownloader.org/download/index
For download with JDownloader, read (example) :
http://www.ipmart-forum.com/showpost.php?p=2566284&postcount=15
(By following the example, you have the folder ASR)

- Read :
http://www.ipmart-forum.com/showpost.php?p=2625156&postcount=1
- You should have the folder : ASR (20450368 bytes)
- Download :
http://www.anonym.to/?http://rapidshare.com/files/219731691/SE_Navcore.8.412.1236.Basicpack.rar
Extract the folder : SE_Navcore.8.412.1236.Basicpack
- Download :
http://www.anonym.to/?http://rapidshare.com/files/225131080/SE_ttsystem.8.412.1236.rev1.1.rar
Extract the folder : SE_ttsystem.8.412.1236.rev1.1
- Download the voice to use :
http://www.ipmart-forum.com/showpost.php?p=1972184&postcount=111
Extract the folder voice
- Download :
http://www.ipmart-forum.com/attachment.php?attachmentid=450399&d=1227432495
Extract the folder suspend
- Download the map you want to use :
For map : Western_and_Central_ Europe 825.2157 or other countries
For map : North_America 825.2157
Maps located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337584
For map : Australia 815.2086
Map located in the thread below (in the last pages) :
http://www.ipmart-forum.com/showthread.php?t=337608
Extract the map
- To activate the map, read and download : Easyusetools for Keygen Mapcheck Metacheck ttsystempatcher
http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58
Extract the folder Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher

Installation :
1- Save the contents of your GO700 in a safe place on your hard drive
2- Clear all the contents of your GO700
3- Copy the folder ASR paste it in the root of your GO700
Open the folder ASR, to limit the volume of ASR folder (20450368 bytes), keep only the necessary :
Example ASR in English : 7 files for 1247664 bytes => 6ENG.ctx, acmod3200_car_eng_F16_compact_lew4.dat, commandsENG.ctx, ddg2p_eng_vadvde_large_lew4.dat, digitsENG.ctx, Support_asr.dat, yes_no_ENG.ctx
Example ASR in French : 7 files for 1108492 bytes => 6FRF.ctx, acmod3200_car_frf_F16_compact_lew4.dat, commandsFRF.ctx, ddg2p_frf_vadvde_large_lew4.dat, digitsFRF.ctx, Support_asr.dat, yes_no_FRF.ctx
Example ASR in US : 8 files for 1871128 bytes => 6ENU.ctx, acmod3200_car_enu_2_5_compact_lew4.dat, acmod3200_car_enu_f16_compact_lew4.dat, commandsENU.ctx, ddg2p_enu_vadvde_large_lew4.dat, digitsENU.ctx, Support_asr.dat, yes_no_ENU.ctx
Close the folder ASR
4- Open the folder : SE_Navcore.8.412.1236.Basicpack (downloaded)
- Install SE_Navcore.8.412.1236.Basicpack contents of the folder to the root of your GO700 later :
- delete the folders ephem, Navcore.8.412.1236@ tomtom.com, Outsourced.8412 and the file system5.5128
- unzip the folder switchfiles.zip, open the folder swichfiles, open folder Config, copy files setconfig.txt, version.txt and paste them in the root of your GO700
- open the file setconfig.txt, keep only “runclean” and “changedtext:TomTom GO 940 LIVE” (delete all other files), delete 940 LIVE, write for example : 700 with your name, close the file setconfig.txt
- delete the folders switchfiles.zip and switchfiles
5- Open the foder LoquendoTTS
Open the folder voice (downloaded), open the folder bin, delete the file libLoqTTS7.so, close the
folder bin, copy the contents of the folder and paste it in the folder LoquendoTTS, close the folder LoquendoTTS
6- Open the folder : SE_ttsystem.8.412.1236.rev1.1 (downloaded)
- Copy the file ttsystem and paste it in the root of your GO700
7- Open the folder suspend (downloaded), copy the file suspend.ogg and paste it in the root of your GO700
8- Add the folders and files you want from your backup :
-Folders : art, audiobooks, contacts, helpme, itn, mp3, photos, raster, sounds, zip ...
-Files : antitheft.bmp, autorun.inf, splash.bmp, suspend.bmp, tomtom.ico ...
9- Install the map :
-Install the folder of your map (downloaded) to the root of your GO700
-Open the folder : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher (downloaded)
Double click on : Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher
Double click on : RunMeforAllAutomatic.cmd
Select : 1 then 1 and follow the onscreen instructions
10- Disconnect the GO700, let it reboot. Wait the message : Create ttgo.bak (about 1 minute)
11- Making various settings
12- Switch off and then turn on the GO700 to properly save the configuration

For TTHome2 : I use the old method (I do not handle my GO700 with TTHome)
With XP :
Open the folder : SE_Navcore.8.412.1236.Basicpack (downloaded), open the folder Navcore.8.412.1236@ tomtom .com, copy the file 8-412-1236-1.dll
In C:\Documents and Settings\ ????????\Application Data\TomTom\HOME\Profiles\xxxxxxxx.default\extensi ons\Navcore.7.903.9183@tomtom.com (or other), I paste file 8-412-1236-1.dll, I note the file name .dll (7-903-9183-1.dll (or other)), I delete the file : 7-903-9183-1.dll (or other), and I rename file 8-412-1236-1.dll : 7-903-9183-1.dll (or other)
With Vista : C:\Users\????????\AppData\Roaming\TomTom\HOME\Prof iles\xxxxxxxx.default\extension\Navcore.7.........
:thanks: :thanks: :thanks:
Bonne route et merci TTuser :urtheman: :urtheman: :urtheman:

grard31