View Full Version : full tutorial for Navcore 8.412 with ALG, IQ routes and VocalizerTTS for TT One


markham
21st April 2009, 03:59
step by step tutorial for TTOne (tested on V2) with Navcore 8.412

Here you have all the files you need, less your map.

Make sure the map is compatible with 8.4xx navcore. Check the chart first.

BT is off from config\setconfig.txt. Use these settings or play with them.

VocalizerTTS working, ALG (on 2GB maps) and IQ routes.

Instructions for TTHome included.

It's a verry clean install, my TTOne v2 boots up faster.

It will work on 1GB SD card(TTOne v3) but without ALG and IQ routes.


pdf tutorial: http://www.megaupload.com/?d=T9HC2DSL

SE_Navcore.8.412.1236: http://www.megaupload.com/?d=EAFH5WDL

(including patched ttsystem)

VocalizerTTS: http://www.megaupload.com/?d=N30FNB1Z (copy the folder VocalizerTTS on the root of your SD card)

TomTom keygen 2009 V2.0.B: http://www.megaupload.com/?d=T2C9NPN5

shlocker
21st April 2009, 15:08
SE_Navcore.8.412.1236: http://www.megaupload.com/?d=EAFH5WDL

(including patched ttsystem)

SE_Navcore.8412.1236 with patched ttsystem and VocalizerTTS: http://www.megaupload.com/?d=EAFH5WDL



www.megaupload.com/?d=EAFH5WDL
These two are both the same, should they be?
2nd one says patched with Vocaliser TTS but cant find a folder for it.

mark cat
21st April 2009, 16:21
x40ligth2 does not work, maybe something is missing?

scoiattolo49
21st April 2009, 17:13
x40ligth2 does not work, maybe something is missing?

Nothing missing, you should have read the release notes from TTuser:


...
no x40light Emus available
...


http://www.ipmart-forum.com/showthread.php?t=352844

markham
21st April 2009, 23:51
VocalizerTTS added as megaupload didn't want to take the second rar file (Navcore 8.412 with VocalizerTTS included)

shlocker
22nd April 2009, 14:17
I have been using lessrams V8204.971 for a while now with great success.
I have put this 8412 version on another SD card but cant see any advantage.
Perhaps someone could tell me if there are any benefits.
I am using V8 maps with IQ routes enabled and TTSvocaliser Voice Samantha.

I thought I would try LoquendoTTS but that doesnt work.
I tried Kate and you have to reboot because no voice then works.
Also blue tooth is greyed out where 8204 actually worked.
8412 enables FM transmission, but TToneV2 doesnt have FM transmitter so thats a waste of time.

markham
22nd April 2009, 16:48
BT is off from the configsetings.txt. You can turn it on if you need it? Do you use BT on a TTOne V2? What do you do with it?

The Washer
22nd April 2009, 19:28
Hi,
When I launch a demo, the synthetic voice slow down and block the hanging demo when speaking.
I use TT ONE V3 with navcore 8.412 and 8.25 map.
original emulation

thanks

markham
22nd April 2009, 19:33
indeed, but when driving in real time isn't that bad.
Don't forget that our devices weren't designed to do TTS. You nedd 366MHz and higher or 64MB RAM.

ianc60
22nd April 2009, 19:39
Check out this http://www.ipmart-forum.com/showthread.php?p=2633005#post2633005

post #112

have fun

The Washer
23rd April 2009, 02:18
indeed, but when driving in real time isn't that bad.
Don't forget that our devices weren't designed to do TTS. You nedd 366MHz and higher or 64MB RAM.ok it's normal with this model.


Check out this http://www.ipmart-forum.com/showthread.php?p=2633005#post2633005
post #112
have fun
:egdance: :thanks:
On my ONE V3 + navcore 8.412 + map 8.25

- TTS is working with emu : iq1 & iqxls
- brightness 0% is not 100 % black
- automatic mode day/night is OK

ianc60
23rd April 2009, 16:53
Fixed suspend bug, should help all models

see post #112 for new file link.

have fun

carpboy
25th April 2009, 10:57
when i change model text to iq1 do i need to add anything else in config folder at the moment i only have model text with iq1 and bton text in there?
cant see any changes after i add iq1 to text.tryed x40light3 seems to work.
could someone tell what folders they have in there config folder

The Washer
25th April 2009, 15:53
You've got to modify in \config\setconfig.txt
line :
model:iq1

y2064
4th May 2009, 07:32
The image works fine. I am using iq1, but the speedcam warning does not allow to use my own word anymore (I was using NC 8.011), only allow choose default sound. Anyone know can this feature make it available in this NC 8.412.

sharonlee
12th September 2009, 10:18
:urtheman: Thank you so very much. Worked perfect for a beginner at this, on a TT One not sure the version but it's 30 series 125/130 1GB if that helps, no sd card slot in it. Used map U.S. Canada 835_2423. Bought this with only US on it and not giving me street names, since I'm a new driver, live in Canada and am a single mom with two boys fighting in the back seat, this was a big deal for me. No time for reading streets on the TT while driving. After 2 weeks of reading and playing around with different files, I finally found this. And it worked perfect. Again Thank you so much. :triodance: :yourock: :triodance:

lk_EC93
30th September 2009, 10:33
Check out this http://www.ipmart-forum.com/showthread.php?p=2633005#post2633005

post #112

have fun

Hi, ianc60

seems that lnk you put was dead. do u have another lnk for that ?:thanks: