View Full Version : 22-05-2011 Hwk Suite Setup v2.20.000



MicrostarGSM®
14th September 2009, 08:49
The Official release is ready in our download area [Only registered and activated users can see links]


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.

You MUST be running HWK software 2.0.9.0 to access support.


UFS_DCTxBB5 v2.0.9.0
----------------------

1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.9.0
-----------------

1. Unlock Codes Display for Infineon EGOLD Voice added
(Boot and See NCK Code for Instructions Press UNLOCK)


SAMs V 2.0.9.0
---------------

TRIDENT
T539 added (DUNL,IM,FL)
TRIDENT VISION
Fixed MSL algorithm for some models (C3050,...)
SWIFT
D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,
E2210B added (DUNL,IM,FL)
QUALCOMM
Manual Port Selection Added
(Use Refresh, After Each Phone Reboot or Reconnect)
(Untic QualComm Mode, Before Flashing)
F480R,i6210,U900W added.
UNLOCK and UNFREEZE added for these models:
A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540


HWK_Support_Suite_Setup_v02.09.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.09.000 ([Only registered and activated users can see links])


Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])



N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Get You own RapidShare Account ([Only registered and activated users can see links])

[Only registered and activated users can see links]
[Only registered and activated users can see links]

MicrostarGSM®
24th March 2010, 08:43
The Official release is ready in our download area [Only registered and activated users can see links]


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


UFS_DCTxBB5 v2.0.10.0
-----------------------

1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.10.0
------------------

1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
3. Infineon New Flash Chip SV7E3204UTA support.
4. ADI KG129,KG248,KG298 added.
5. " Cannot open file " Bug Fixed.

SAMs V 2.0.10.0
----------------

TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.

HWK_Support_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

[b]HWK_Support_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v2.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v2.0.10.000 ([Only registered and activated users can see links])


Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])



N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])


[Only registered and activated users can see links]
[Only registered and activated users can see links]

MicrostarGSM®
26th March 2010, 07:31
The Official release is ready in our download area Welcome to official UFS & HWK Website! ([Only registered and activated users can see links])


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


UFS_DCTxBB5 v2.0.10.1
-----------------------

1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
2. Box Init bug after BB5 flash fixed.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

HWK_Support_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Support_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.001 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.001 ([Only registered and activated users can see links])

Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])



N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Download Here ([Only registered and activated users can see links])

:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])

MicrostarGSM®
3rd April 2010, 11:25
The Official release is ready in our download area Welcome to official UFS & HWK Website! ([Only registered and activated users can see links])


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


UFS_SAMs v2.0.10.2
-----------------------

SWIFT-AEROFONE
T239 added (CUNL,FL)
BROADCOM
Fixed UnFreeze Key Display.

HWK_Support_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Support_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.000 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.001 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.001 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.002 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.002 ([Only registered and activated users can see links])

Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])


N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Download Here ([Only registered and activated users can see links])


:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])

MicrostarGSM®
15th May 2010, 14:42
The Official release is ready in our download area Welcome to official UFS & HWK Website! ([Only registered and activated users can see links])


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


UFS_SAMs v2.0.10.3
-----------------------

V 2.1.0.3
------
TRIDENT
M628N added (DUNL,IM,FL)
SWIFT
A256,J218,S3600i,S3601C added (UNL,IM,FL)
SWIFT-3G
B2703 added (CUNL,FL,SECT,BT)
QUALCOMM
A747,C5510,C5510U,T929 UNLOCK and UNFREEZE added.
Improved Decryption algo, more models UNLOCK and
UNFREEZE supported by Default.
BROADCOM
S5230K,S5230R added (CUNL,FL,BRP)
B5310,S5620,S5628,S7070C added (FL)
Use Samsung Kies drivers for these models (B5310,S562x)
Fixed 'Cannot Find NandInfo !' on some models.
COMMON
Log to file fixed for Trident models.
Introduced New Extremely Fast Key Calculation Algorithm (DHLT)
Need few hours for Tables generation at First Software startup.
But after, Key calculation for Qualcomm, Broadcom and Trident
platforms will take few seconds. DHLT (c)SarasSoft.

HWK_Suite_Setup_v02.0.10.003 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.003 ([Only registered and activated users can see links])


Users who not want to wait few hours for DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT



_DHT Part1 ([Only registered and activated users can see links]) _DHT Part2 ([Only registered and activated users can see links])

_DHT Part2 ([Only registered and activated users can see links]) _DHT Part2 ([Only registered and activated users can see links])

_DHT Part3 ([Only registered and activated users can see links]) _DHT Part3 ([Only registered and activated users can see links])

_DHT Part4 ([Only registered and activated users can see links]) _DHT Part4 ([Only registered and activated users can see links])

_DHT Part5 ([Only registered and activated users can see links]) _DHT Part5 ([Only registered and activated users can see links])

_DHT Part6 ([Only registered and activated users can see links]) _DHT Part6 ([Only registered and activated users can see links])


Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])


N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Download Here ([Only registered and activated users can see links])


:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])

MicrostarGSM®
24th May 2011, 08:21
The Official release is ready in our download area Welcome to official UFS & HWK Website! ([Only registered and activated users can see links])


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


LG GSM V 2.0.10.4
------------------

1. Infineon GB107,GB108,GB115,GS100,GS101,GS102,GS105,
GS106,GS107,GS108,KG289,KP109 added.


UFS_SAMs v2.0.10.4
--------------------

TRIDENT VISION
B3210M added.
Bug in E2P Filename Display fixed.
OM(SYSOL)
On the Fly E2P Patch added to keep Original IMEI number.
SWIFT
C3212i added(UNL,IM,FL)
On the Fly E2P Patch added to keep Original IMEI number.
SWIFT-AEROFONE
E1080i,E1086,E1086L,E1170,T139 added (CUNL,PUNL,PIM,FL)
On the Fly E2P Patch added to keep Original IMEI number.
On the Fly MCU Patch added to bypass MSL security for MSL3
(MSLC16) products (E1080,E1080i,E1086,E1150,E1160, ...)
after is possible Direct Unlock, Rebuild IMEI in normal way.
QUALCOMM
S3370,S5350M added (FL,CUNL,UNFR)
S5350 added (CUNL,UNFR)
Increased Speed in Communications (NVM Read/Write, RAM Read)
BROADCOM
B5310U added (FL)
i6230,S3653M added (CUNL,FL,BRP)
Combo Cable (USB+RJ45) Support added, not need Manipulations
with Cable when use [QCDI Info]
Corrected CSC,APP,PFS flashing for BCM2153 platform (B5310,..)
Product will Restart after success Boot Change,
if Failed, will stay in Download Mode to Allow Retry.
[Full Download] will Write All without Restart after Boot Change.
COMMON
[Refresh] will Show Avalaible Ports List with Full Names.


[b]HWK_Suite_Setup_v02.0.10.004 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.004 ([Only registered and activated users can see links])



Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])


N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Download Here ([Only registered and activated users can see links])


:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])

MicrostarGSM®
24th May 2011, 08:25
The Official release is ready in our download area Welcome to official UFS & HWK Website! ([Only registered and activated users can see links])


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.


UFS_SAMs v2.0.10.5
--------------------

TRIDENT VISION
M2513 added (UNL,CUNL,IM,FL)
SWIFT
Added MCU_Id and Type Display.
Increased Preloader boot speed.
QUALCOMM
More Versions Support of Hidden Sysinfo models CUNL (S3370,..)
A877,M7600H,M8800H,S5603T,S7120H,S8300T added.
QUALCOMM+LSI
M8910,M8910B,M8910H,M8910U,S8000,S8000B,S8000C,S80 00H,S8000U,
S8003,S8500,S8500C added (FL)
BROADCOM
C3510T,M3710,S5560H added (FL)
S3650H,S5230C added (FL,CUNL,UNFR,BRP)
INFINEON
Infineon Platform Introduced, See on [Sky/INF] Tab.
E1151 added (CUNL,FL)
DHLT Engine will ask about additional DHLT tables generation.
COMMON
[Refresh] will Auto Select Ports, be sure that Right Model
and Mode is Selected (Untick [QualComm mode] when Flashing !)


Users who not want to wait few hours for 3rd DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT


HWK_Suite_Setup_v02.0.10.005a ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.005 ([Only registered and activated users can see links])

HWK_Suite_Setup_v02.0.10.005a ([Only registered and activated users can see links])


Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])


N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Download Here ([Only registered and activated users can see links])


:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])

MicrostarGSM®
24th May 2011, 08:47
The Official release is ready in our download area Welcome to official UFS & HWK Website! ([Only registered and activated users can see links])


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

LG_GSM v 2.1.0.6 (HWK Required)
--------------------------------
1. Added NSCK,SPCK,CCK,SIM codes Display for GS10x


UFS_SAMs v2.0.10.6
--------------------

TRIDENT
X427 added (DUNL,IM,FL)
TRIDENT VISION
M2520 added (UNL,CUNL,IM,FL)
Display of USER LOCK Key for All Models.
SWIFT
E2550,E2550D,E2558 added (UNL,SECT,IM)
Notes:
1.Chinese Versions E2550Zxxx select as E2558 for UNL,SECT,IM.
2.E255x PRAM Flashing not Supported yet, use Original Flasher.
B3410C,E2510C,S5050C added (UNL,IM,FL)
Note: Chinese Versions B3410Zxxx select as B3410C.
SWIFT-AEROFONE
C3300D,C3300K,C3303,C3303K added (UNL,SECT,IM,FL) use 530Kom Cable.
E1107-DX,E1107L,E1117-MEA-IND,E1130,E1130B,E1150-MEA-SEA,E1153,
E1160-DX,E1220,E2120i,E2120L,E2121,E1252,E2121B,E2210T,E 2152,
E2370 added (CUNL,PUNL,PIM,FL)
Note: Mixing of DX MEA SEA Models causes Blinking or Dead Sets.
[Restart] Button now Exit TAT mode with Battery.
Auto Exit from TAT Mode when Flashing, not need
Cable or Battery Reconnect after UI functions (Info,IM,..)
SWIFT-3G
J808,S5550,S5550U added (CUNL,SECT,FL)
B7722,B7732 DUOS added (CUNL,SECT,FL) Flashing only Master Part.
C3630C,C3730C,S3930C TD-SCDMA added (FL) use 530Kom Cable.
QUALCOMM
A657,A887,A897,M7600L,S5530,T559 added.
BROADCOM
A697,B3410W added (FL,CUNL,UNFR,BRP)
S5250,S5253,S530,S5333 added (FL)
Boot Repair Enabled for All Broadcom models, use 530Kom Cable.
Some Models have encrypted Boot2.img and don't have uart_boot,
for these models use our released Boot_Repair packs.
Note: S562x with OneNand Flash Chip, Cannot be Repaired.
Added Unlock support(CUNL) for Hidden Sysinfo models (S5560,..)
if have no succes in SysInfo search, need ReFlash, to have untrashed FS
COMMON
Reduced/Full Log of TFS file list progress for OM/Swift.
Improved FileOpen dialog, to Override suggested path
to last used on same model.
Used Abbrevations List can be seen at the Bottom of this page.
DOCUMENTS
Samsung B7722 How to Rev.1
Samsung C3300_C3303 How to Rev.1
Samsung S523x Warning Rev.1
Samsung S7070 How to Rev.1
Samsung Swift-Aerofone MSL3 Models How to Rev.1


Many thanks to all those who have supported us!!!


HWK_Suite_Setup_v02.0.10.006 ([Only registered and activated users can see links]
)

HWK_Suite_Setup_v02.0.10.006 ([Only registered and activated users can see links])




Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])


N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Download Here ([Only registered and activated users can see links])


:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])

MicrostarGSM®
24th May 2011, 08:52
UFS_SAMs v2.0.10.7
--------------------

SWIFT-AEROFONE
E2152 FULL, _RD, E2P Write Bug Fixed.
Note: E2152 DX Firmwares cannot be Properly Flashed.
QUALCOMM
B2710,S3370E added.
QUALCOMM+LSI
S8000L added (FL)
BROADCOM
S5620B,S5628i added (FL)
COMMON


Many thanks to all those who have supported us!!!


HWK_Suite_Setup_v02.0.10.007 ([Only registered and activated users can see links]
)

HWK_Suite_Setup_v02.0.10.007 ([Only registered and activated users can see links]
)


Samsung / Qualcomm USB Drivers can be downloaded here:- ([Only registered and activated users can see links])


N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])

Download Here ([Only registered and activated users can see links])


:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])

MicrostarGSM®
24th May 2011, 08:53
The Official release is ready in our download area [Only registered and activated users can see links]

HWK Release 22/05/2011 Release Date: 22/05/2011

Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.2.0.0, old client versions will no longer work.

You MUST be running HWK software 2.2.0.0 to access support.


DCTxBB5 V 2.2.0.0
-----------------------

1. BB5 products: RM-576,RM-577 (6700s,6700s-1c) added.
2. Local RPL Service Fixed for ASIC 2,5,6,7,11 (UEM_PASW is Correct now)
Note: Need Confirm [Readout and Use UEM IMEI] when do [Rd UEM].
3. [Check Ask/Rpl] Renamed to [Calc Ask/Rpl] as can Calculate RPL now.
4. [Calc Ask/Rpl] Function will Generate Real RPL from ASK file (ASIC 2,5,6,7,11)
Note: When Reading UEM, do not Forget Set Right [UEM Changed] Status !
5. RSA Lock/Unlock for All DCT4+ products (not need Patch)
6. Life Timer added to [PM Edit]
7. DCT4 INFINEON Based Products USB Flashing / UI support added:
RH-111,RH-125,RH-126,RM-607,RM-608,RM-643,RM-644,RM-647,RM-653,
RM-669,RM-689,RM-704,RM-732,RM-733 (1202,1616-2,1616-2b,C1-01,C1-01.1,
C1-02,C1-02.1,1280,1800,1800b,C1-00,C2-00,X1-00,X1-00.1)
8. BB5 RAP3Gv40 Based Products USB Flashing / UI support added:
RM-509,RM-510,RM-511,RM-540,RM-598,RM-604,RM-615,RM-638,RM-721,RM-722
(3710a-1,3710a-1c,3711a-1,X3-00,7230-1c,7230-1,5330-1d,6303ci,C2-01,C2-01.5)
9. BB5 RAPU Based Products USB Flashing / UI support added:
RM-582,RM-596,RM-601,RM-609,RM-610,RM-627,RM-629,RM-632,RM-634,
RM-639,RM-640,RM-645,RM-648,RM-658,RM-659,RM-662,RM-675,RM-682,
RM-688,RM-691,RM-697,RM-699,RM-707,RM-718,RM-719,RM-720,RM-749
(Vertu CQ,N8-00,C6-01,E6-00,E6-00.1,X5-01,5230-1d,E5-00,E5-00.2,X3-02,C3-01,
C5-00.X5-01.2,E73,X7-00.1,C3-01m,C7-00,6702s,C5-00.1,C7-00b,C5-03,E5-00m,
X7-00,C6-01.3,C5-03.2,C5-04.1,C7-00s)
10.BB5 RAPIDO Based Products USB Flashing / UI support added:
RM-484,RM-485,RM-486,RM-551,RM-552,RM-559,RM-588,RM-593,RM-594,
RM-612,RM-624,RM-625,RM-684
(N86-1,N86-3,N86-5,X6-00.1,X6-00m,X6-00,5230-1,5230-1c,5230-1b,C6-00,
C6-00.1,5288,5250)
11.BB5 JUNO (BCM21351) Based Products USB Flashing / UI support added:
RM-497,RM-586,RM-614,RM-618,RM-709,RM717
(7020a-2,2710c-2,C3-00,X2-00,X2-01,X2-01.1)
12.Original SX4 Card Support Added (Use Any PCSC Compatible Card Reader)

LG_GSM v 2.2.0.0
------------------

1. Infineon:
A110,A130,A133,A133GO,A170,A180,C100,C105,C300,C30 0GO,C305,
C310,GB220,GB220nGO,GB230,GB280,GD350,GD510,GD510N ,GM360,
GM360i,GM600,GS170,GS290,GS290GO,GS290N,GS390GO,GS 500,GS500g,
GS500gx,GS500v,GT350,GT350GO,GT350i,GT360,GT365,GU 220,GU230,
KC550,KC550d,KF510,KF510d,KF600,KF600d,KM380,KM380 c,KM380d,
KM385d,KM386c,KP500,KP500N,KP501,KP502,KP502GO,KP5 05,KP550,
KP570q,KS360,KS365,T300,T310,T310i,T310N,T315,T315 i,T320,
T320e,T320g,T325 added.
Notes:
1. To See Unlock Codes and Instructions, Press
2. To Flash Dead Phones, Tick [Emerg. Boot]
3. FLS and BIN files supported for Flashing.
2. USB Support for Infineon SGOLD3, SGOLDRADIO, XGOLD213.
Note: To use USB Select USB in [Baud] ComboBox.
3. ADI: G210,G220,G232,G233,G259,G262,G263,G610,G622,G632, G635,
G639,G660,G672,G677,C682,G688,G810,G822,G828,G912, GM200,GM205,
GM205GO,GM210,KF245,KG296,LG8930,MG235,MG295,MG296 added.
4. TI: C1300i,C2000,G850,L1400i,MG191a,MG191b,MG200c,MG20 0d added.
5. MTK: A120,A155,A160,A165,GB160a,GB160b,GB161,GB190a,GB2 70,
GS190,GS200,GS205 added.
6. BT Address Write Added for ADI, Infineon and MTK platforms.

[B]SAMs V 2.2.0.0
----------------

TRIDENT
A127,i626,T719,X475 added (DUNL,IM,FL)
OM(SYSOL)
T209,T319 added (DUNL,IM,FL,SECT)
SWIFT
A436,A437,A516,A517,T229,T249,T339,T349-LTA-USA,T369,
T409,T619,T739 added (DUNL,IM,SECT,FL)
Added Multi Drive support for TFS Read.
Fixed SLAVE Boot Bug on some models (D980,D980F,D988)
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-AEROFONE
Added [Patch MSL] Function to Patch without MCU Part Flashing.
C3300i,T109,T119 added (DUNL,IM,FL)
E1050,E1055G,E1055T,E1080F-IND-MEA-SEA,E1080W,
E1081T-EU-IND-MEA-SEA,E1083C,E1085F,E1085F-MEA,E1087T,E1105F,
E1150i,E1160i,E1170i,E1170T,E1172,E1175T-EU-IND,E1178,E1225F,
E1225T,E1225T-IND,E2121L added (PUNL,PIM,FL)
Notes:
1.Mixing of EU IND MEA SEA Files causes Blinking or Dead Sets.
2.E1081T EU E2P Image is not Compatible with IND, MEA or SEA.
3.For Cross Flashing Select Model Name Extension by File type.
4.Before Unlock, Info to see Codes or Rebuild IMEI use
[Patch MSL] Button or Flash with [Patch MSL] Option Enabled.
C3222,C3222W added (DUNL,CUNL)
Note: C3222 Flashing not Supported yet, use Original Flasher.
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-3G
C5010E,E3210 added (CUNL,SECT,FL)
QUALCOMM
A597,A847,A927,B2710D,C5180,S5520,S5580,S6700T,S68 88,T359,T479,
T746,T749 added.
More Versions Support of Hidden Sysinfo models CUNL and UNFR:
A597,A706,A707,A717,A727,A847,A887,A897,A927,B2710 ,B2710D,S3370,
S5530,T359,T469,T479,T559,T659,T746,T749
QUALCOMM+LSI
S8500B,S8530 added (FL)
BROADCOM
S5230N added (FL,CUNL,UNFR,BRP)
S3850,S5260,S5263,S5330L,S5560i,S5750E,S5753E,S723 0B,S7230E,
S7230W,S7233E added (FL)
S5250,S5253,S5330,S5330L,S5333 Boot Repair (BRP)
[QCDI Info] Renamed to for BroadCom Models.
INFINEON
B3310i,C3200,C3200G,C3200L,C3530,C3530L,E2230,E223 0M,E2232,
E2330,E2330B,E2330C,E2530,E2652,E2652W,S3310i,S335 0,S3353,
S3550,S3550C,S3550L added (CUNL,PUNL,PIM,FL,UFL)
Note: for USB Flashing select 'USB0' in [BaudRate] box.
E1151, Now Possible to Flash Read BIN Dump (Size: 007F0000)

[B]HWK_Support_Suite_Setup_v02.20.0.000 ([Only registered and activated users can see links])

HWK_Support_Suite_Setup_v02.20.0.000 ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000(FULL) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (FULL) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 1) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 2) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 3) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 4) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 5) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 6) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 7) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 8) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 9) ([Only registered and activated users can see links])

HWK_Major_Suite_Setup_v02.20.0.000 (PART 10 - Last Part) ([Only registered and activated users can see links])

★★DHT1 & 2 - Extract to x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT

Download _DHT.part01.rar ([Only registered and activated users can see links])
Download _DHT.part02.rar ([Only registered and activated users can see links])
Download _DHT.part03.rar ([Only registered and activated users can see links])
Download _DHT.part04.rar ([Only registered and activated users can see links])
Download _DHT.part05.rar ([Only registered and activated users can see links])
Download _DHT.part06.rar
([Only registered and activated users can see links])


★★★DHT3 - Extract to x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT

Download _DHT3.part1.rar ([Only registered and activated users can see links])
Download _DHT3.part2.rar ([Only registered and activated users can see links])
Download _DHT3.part3.rar ([Only registered and activated users can see links])


HWK Old Version 2.1.0.00

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

N-Box Old Software UFS Suite

Download Here ([Only registered and activated users can see links])


:: N-box.org - Home :: ([Only registered and activated users can see links])
GTS-Box.org ([Only registered and activated users can see links])