Dear member
I have problem to flash WD2 phone by this flasher,kindly share your tips for flashing,thanks.




wbr

Dear member
I have problem to flash WD2 phone by this flasher,kindly share your tips for flashing,thanks.




wbr


please post what the error here so that we can help you

if i flash my phone 65 or n-gage shows :

cannot detect mobile brand
1st boot Err : Bad Ufs Resp1
Process Failed, Repowering Mobile

same problem with me in 6600 nokia, cant flash the fone , has start up failure , only detects but no flash please .
please somebody come up with the solution....
a friend to all ,
shaikhboy.

I got problem for flashing 3650 phone,the phone was working before flash,I try to flash chinese compo v3.15c4,after that,my phone become dead(cannot on),reflash it using v3.15c1+ppm,my phone can on but white screen(something like startup fail),I try to flash again chinese combo and tick software update defaults + full factory defaults..........failed....try to format user area.........failed,pls advice and give solutions.






Cannot Detect Mobile Brand
1st Boot Ok, WD2, UPP: 0082
2nd Boot Ok, FLID: 0001257E, Amd 29BDS643GT
Algorithm: w2_amd.fia, w2_cbusb.fia
Algorithm Ok, MSID: 84F7C5E4AB7C6B5FA87E76DB4D
Decoded MSID: 3E4EBAF7-00907670-A8000000
Encoded FAID: 765D0993-A3E00B4D-ED421539
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x00010000-0x006FFFFF Erased, Time: 01:07
Area: 0x02000000-0x023FFFFF Erased, Time: 00:37
Area: 0x04000000-0x047EBFFF Erased, Time: 01:17
BT MCM (21) Image Found: 0x0002DD10
BT MCM Registering Done
MCU Flashing Completed, Time: 08:54
Flashing Completed, Rebooting Mobile
Set Full Factory Defaults Failed
User Area Format Failed
00000000: 00 00 00 00 00 00 00 00 ........
User Area Format Failed
00000000: 00 00 00 00 00 00 00 00 ........


ps:power on phone,white screen


wbr

This time I tick mcu+ppm with V3.15C9,the error are as below:



Cannot Detect Mobile Brand
1st Boot Ok, WD2, UPP: 0082
2nd Boot Ok, FLID: 0001257E, Amd 29BDS643GT
Algorithm: w2_amd.fia, w2_cbusb.fia
Algorithm Ok, MSID: 84F7C5E4AB7C6B5FA87E76DB4D
Decoded MSID: 3E4EBAF7-00907670-A8000000
Encoded FAID: 765D0993-A3E00B4D-ED421539
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x00010000-0x006FFFFF Erased, Time: 01:13
Area: 0x02000000-0x023FFFFF Erased, Time: 00:41
Area: 0x04000000-0x047E0FFF Erased, Time: 01:25
BT MCM (21) Image Found: 0x0002DD10
BT MCM Registering Done
MCU Flashing Completed, Time: 08:54
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x00010000-0x006FFFFF Erased, Time: 01:07
Area: 0x02000000-0x023FFFFF Erased, Time: 00:37
Area: 0x04000000-0x047E0FFF Erased, Time: 01:17
BT MCM (21) Image Found: 0x0002DD10
Write Error: HDR BT 7, at: 0x000000DC
Process Failed, Repowering Mobile



ps:phone cannot ON


pls help

repowering failed and software idle

yes!
i also encounter the same problem

maybe........this software still got bugs,I have try other third party software but still same.

try write pmm erase to mcu & ppm area

UNTICK AUTODETECT PRODUCT FEATURES

@isaackenny
Thanks for reply,I tried already,the problem is the flasher cannt detect the phone but can flash,so is unable to format user area,software update defaults or full factory defaults and so on,just wait for the 3650 repair file from my reseller,will post result here,thanks.


wbr

@isaackenny
Thanks for reply,I tried already,the problem is the flasher cannt detect the phone but can flash,so is unable to format user area,software update defaults or full factory defaults and so on,just wait for the 3650 repair file from my reseller,will post result here,thanks.


wbr

Are you using 3650 Flash Cable without 3k3 Ohm resistor through BSI Line?

already added 3k3 ohm resistor,not help.

u need ur phone in LOCAL MODE STATE so u can only do FORMAT USER AREAS without any problem

I will try again 3.3k,68k,47k one by one and let know the results,thanks.



wbr

all failed,I try another 3650 with 3.3k,phone can be changed mode,so,i comfirm the cable is ok.


Init Local Mode Ok, Time: 00:22
Init Test Mode Ok, Time: 00:06
Init Normal Mode Ok, Time: 00:34


any solutions?

maybe due to hardware problem probaly one of the three SRAM faulty

@isaaackenny
Thanks for ur reply,I already fixed it.....is software problem.


wbr

@e64y

Please explain how did u solve it ?

PMM corrupted.

U can format 6600 by pressing 3 keys (green, 3 , *) while power on the phone wirthout sim from battery.
Maybe this solution works with 3650.
Pls write down results for us.

B.R.
ceru

U can format 6600 by pressing 3 keys (green, 3 , *) while power on the phone wirthout sim from battery.
Maybe this solution works with 3650.
Pls write down results for us.

B.R.
ceru

3650 no work !!!

e64y, can you share us your pmmerase flash? and do you have pmmerase flash file for 6600?

e64y, can you share us your pmmerase flash? and do you have pmmerase flash file for 6600?

For 3650 :lol: :lol: :lol:

how to resolve "Process Failed, Repowering Mobile"

how

can someone please explain to me what it means by FORMAT USER AREA? I also experienced few problems like this. Have a 6600 is flashes but the screen is hazy when it boots.

how to resolve "Process Failed, Repowering Mobile"

may be... it's already dead in hardware problem

Why I can't boot my phone to begining upgrade firmware??? I use Ngage!

if i flash my phone 65 or n-gage shows :

cannot detect mobile brand
1st boot Err : Bad Ufs Resp1
Process Failed, Repowering Mobile

I had this error the other day with a 6600, that when flashed to 5.27 came up "Contact service". To fix that I did 'erase flash', then went to reflash but kept getting that boot error. Shutting down Twister and restarting the program seemed to fix it, phone was detected fine and it flashed OK. Customer happy! But indicates that Twister DCTx (1.3e) can sometimes give you problems.

Running Twister on a Windows ME laptop FYI.