View Full Version : iGo8, Amigo, Primo Skins, Schemes, Themes, GFX updated periodically



IOJI
31st May 2010, 07:26
iGo8, Amigo, Primo Skins, Schemes, Themes, GFX updated periodically

I think that iGO8 deserve a proper thread where to post all the good stuff that makes it look and work so well, based on big interest for it. Beside TomTom that has lot of fans, iGO, with its versatility and reliability has also a lot, more and more every day. Let's post here all that good stuff that make it so good. If this thread will catch up like thread for maps, i will make it sticky. For beginning, let's start with my schemes and GFX that makes a very realistic navigation experience. I used 360 degrees panorama, so, no matter witch way you go, the image doesn't get repeated. GFX folder goes in iGo8 folder and Real Day/Night Panorama in iGo8/content/scheme folder. Enjoy.

[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]


Download ([Only registered and activated users can see links])

varjomies
31st May 2010, 20:43
GJmpp 1.3

****** GJmpp 1.3 - 2010.05.31 ******
1. Added MapChanger. (switch on in GJmpp menu and show button in "drag map")
2. Added Compass on the map.
3. Tech. Repair.

Link: ([Only registered and activated users can see links])

[Only registered and activated users can see links] ([Only registered and activated users can see links])
Mirror:
[Only registered and activated users can see links]



[Only registered and activated users can see links] [Only registered and activated users can see links]
[Only registered and activated users can see links] [Only registered and activated users can see links]
[Only registered and activated users can see links] [Only registered and activated users can see links]

---------- Post added at 20:43 ----------
---------- Previous post was at 20:37 ----------


Thanks for the guidance. Folder changed to igo8, loading become smoother. I follow the above the steps, but the Out of Memory message still comes on whenever i go into navigation map mode. Don't know where to go from here... please advise. Thanks

---------- Post added at 16:55 ----------
---------- Previous post was at 16:50 ----------

Hi Varjomies, i suspect it is the English voice file that is not matching as I copy from the Igo file. Do you have English Voice file for Primo

Here you,re:
English voice

[Only registered and activated users can see links]

IOJI
7th June 2010, 19:47
Gurjon skin v1.5 modified with Phone and Bluetooth keys, and FM. But you have to edit in skin archive the path to this functions to make it work.

DOWNLOAD ([Only registered and activated users can see links])

varjomies
9th June 2010, 00:09
broken link
up lod again

Post 51 . There,s latest skin v 1.5

---------- Post added 9th June 2010 at 00:09 ----------
---------- Previous post was 8th June 2010 at 23:32 ----------

Sk Primo Sbertaud13 1.0 EUR+


[Only registered and activated users can see links] ([Only registered and activated users can see links])

How do you install

Primo/branding.zip
Primo/utility
Primo/content/lang/Lang_French.zip

[Only registered and activated users can see links]

sk_Primo_Sbertaud13_1_0_EUR+.zip ([Only registered and activated users can see links])

IOJI
12th June 2010, 10:17
****** GJmpp 1.6 - 2010.06.10 ******

1. Fixed standard compass.
2. Added compass on quick menu button.
3. Added selection of the distance to display POI.
Replacement of icons we'll look at autumn
4. Added pad under the house numbers.
5. Added selection to the house numbers at the cursor.
6. In case of the long name of the street and house numbers are selected at the bottom, numbers temporarily will be switched to the cursor.
7. Technical repairs.

DOWNLOAD ([Only registered and activated users can see links])

varjomies
13th June 2010, 00:19
Sk Primo Sbertaud13 v1.1 EUR+ 480X272


[Only registered and activated users can see links] ([Only registered and activated users can see links])


Primo/branding.zip
Primo/utility
Primo/content/lang/Lang_French.zip


[Only registered and activated users can see links]

sk_Primo_Sbertaud13_1_1_EUR+.zip ([Only registered and activated users can see links])

IOJI
14th June 2010, 16:31
****** GJmpp 1.7 ******



DOWNLOAD ([Only registered and activated users can see links])

[Only registered and activated users can see links]

IOJI
16th June 2010, 20:09
****** GJmpp 1.8 - 2010.06.16 ******


1. Added Bluetooth 2 internal variants.
2. Added additional information about favorites.
3. Added in favorites - sort function.
4. Removed message ".... ok" in function "captured screen".
5. Added to see signal level and name of tuned station in TMC events screen. (Thanks fitor!)
6. Technical repairs.

DOWNLOAD ([Only registered and activated users can see links])
[Only registered and activated users can see links] ([Only registered and activated users can see links])

varjomies
21st June 2010, 02:37
[Only registered and activated users can see links]

PRIMO Bidru51 EUR V1.0 19/06/2010
supported_resolutions=480_272

V1.0 + EUR
- Modification of each fund info (size and appearance) (Bidru51)
- Added button on the navigation screen of "with or without pay" (Bidru51)
- Announcement by clicking on the audio button toll (Bidru51)
- Set the transparency unified most info (Bidru51)
- Added average speed on the course (Bidru51)
- Turning on / off "settings in the time trial before the next maneuver (with offset second maneuver info) (Bidru51)
- Activation "on / off" in the display settings of the average speed
- Changing color info button info. (Bidru51)
- Change colors to suit exceeded the speed (Bidru51)
- Offset on the right half of visual alerts radar (Bidru51)
- Change color of heading out of roundabouts (Bidru51)

- Establishment of radar images of the standard EUR + (Sbertaud with images Bidru51)
- Setting up the button in the DragMode to Add / edit an ((Sbertaud) modif icons by bidru51)

- Replacing the MENU button label by speed. (Sbertaud)
- Long press the MENU button (so Mails speed) leaves Primo (Sbertaud)
- Creating a settings menu skin in the settings. (Sbertaud)
- With direct parameters of skin with long press the Menu button Fast. (Sbertaud)
- In the quick menu, long press the volume button in the reference volume controls. (Sbertaud)
- The traffic alerts are not TTS. I gave them as WAV for the skin Primo. Except that the sounds are not eaten .. finally! (Sbertaud)
- To adjust the volume of camera alerts in the volume control using the sound setting alerts. (Sbertaud)
- Expansion of hard news button News (Sbertaud)
- The activation of the radar lies in the parameters of skin / radar (Sbertaud)
- Parameters = 1 and extra_settings experimental_features = 1 are not necessary in the sys.txt. They are enabled by default. (Sbertaud)
- Added panel to turn ban, ban Meaning ... (Sbertaud)
- Added Mapchanger (Button in the DragMode) (Sbertaud)

[Only registered and activated users can see links]

sk_Primo_Bidru51_1.0_EUR+.zip ([Only registered and activated users can see links])

Thanks to Bidru51



Sk Primo Sbertaud13 v1.4a EUR+

[Only registered and activated users can see links] ([Only registered and activated users can see links])



[Only registered and activated users can see links] ([Only registered and activated users can see links])

How do you install ?
branding.zip/Primo
utility/Primo
Lang_French.zip/ Primo/content/lang/


[Only registered and activated users can see links]

sk_Primo_Sbertaud13_1_4a_EUR+.zip ([Only registered and activated users can see links])

---------- Post added at 02:37 ----------
---------- Previous post was at 02:10 ----------

Primo Content Car 37


[Only registered and activated users can see links] ([Only registered and activated users can see links])

Copy "Primo/content/car"

Choose "more/Settings/Map Settings/3D Vehicle Gallery" i

[Only registered and activated users can see links]

Primo_content_car_37.rar ([Only registered and activated users can see links])

Thanks to fantom63

varjomies
29th June 2010, 13:31
PRIMO Bidru51 EUR V1.2 27/06/2010
supported_resolutions=480_272

[Only registered and activated users can see links]

[Only registered and activated users can see links]



PRIMO Bidru51 EUR V1.2 27/06/2010
supported_resolutions=480_272
Special loading by varjomies :LoL:
Eur v1.2 +
-Added a banner at the bottom of the screen on / off "in the settings with this band" button 2D/3D; current time, battery indicator, Altitude, "on / off of the voice guidance (Bidru51)
-Adjusting the transparency in the menus to the bottom band (Bidru51)
-Fixed a bug on the button voice guidance (Bidru51)
-Fixed a bug on the choice long press the button on the speed (or reduce out)
-Adjustment of the transparency to all button "quick menu; tmc; toll" (Bidru51)
-Added button "home" "work" corresponding to the favorites of your choice with the entry sys.txt (from the skin of Sbertaud)

put in the sys.txt
[Homework]
1 = "beach"
2 = "Hotel"
Although case sensitive (upper / lower compared to the name you put in the favorites)

Adding to the favorites-button publishing the name of favorite (from the skin of Sbertaud)

New translations of the file-Lang
-Various fixes

Download

[Only registered and activated users can see links] ([Only registered and activated users can see links])

Thanks to Bidru51

IOJI
1st July 2010, 19:58
igo8 v8.3.4 Riks Skin v3.7 480x272

[Only registered and activated users can see links] ([Only registered and activated users can see links])

[Only registered and activated users can see links] ([Only registered and activated users can see links])


Download ([Only registered and activated users can see links])

awirnok
1st July 2010, 20:48
This version can show lanes, in which I must turn?
Like [Only registered and activated users can see links]
this version looks better than version with Gurjon skin, because it is more simple.

IOJI
1st July 2010, 21:32
psol_journey_3.4AB_TC_ADIVOR v 3.1 check - All Car++ AllRes. igo8.3.X

[Only registered and activated users can see links]

Download ([Only registered and activated users can see links])

awirnok
1st July 2010, 21:32
Thank You for answer. Riks skin does not supported for 320x240 resolution. :(

IOJI
1st July 2010, 21:38
Thank You for answer. Riks skin does not supported for 320x240 resolution. :(

No, sorry, the author doesn't own this resolution device...just 480x272 and 480x234.

varjomies
2nd July 2010, 02:11
iGO Primo Mod Pack SiD78

[Only registered and activated users can see links]

[Only registered and activated users can see links] ([Only registered and activated users can see links])

iGO Primo Mod Pack SiD78 : Primo 480x272 28/06/2010
ui_igo9 : "primo/ui_igo9"
Gfx : "primo/gfx"
GJmpp_v1.10D.zip ve GJmpp_v1.10N.zip : "primo/content/skin"
Montagnes-Jour-Primo.zip ve Montagnes-Nuit-Primo.zip : "primo/content/scheme"
ui_igo9_blue_arrow or green: Primo/content/skin/GJmpp_v1.10D.zip & GJmpp_v1.10N.zip /ui_igo9/480_272

Included:
Gold interface for the program and skin GJmpp v1.10D
Green arrow turns (current, next, full-screen pointers)
The blue arrow turns (current, next, full-screen pointers)

To add Golden Skin "GJmpp v1.10D" and schemes "Montagnes"
unpack the replacement, in the directory with the program folder:
content
gfx
ui_igo9

To add a pointer green or blue for the current and the next turn,
as well as for full-screen pointers in the skin "GJmpp v1.10D"
add to folder ui_igo9 \ 480_272 files from the folders:
ui_igo9_green_arrow \ 480_272 or ui_igo9_blue_arrow \ 480_272

Huge gratitude for the skin, hands and help:
gurjon
arkoko
DVS1
WertVRV
bg-m
Andron66
RatnikovS

[Only registered and activated users can see links]

[Only registered and activated users can see links]

Thanks to SİD78

IOJI
2nd July 2010, 11:24
Dokky Skin IGo8.3

- Works in both 240x320 and 320x240 resolution.
- Plan on map.
- Display of housenumbers.
- Display of speedlimit.
- Transparent infopanel.

[Only registered and activated users can see links] ([Only registered and activated users can see links])

Download ([Only registered and activated users can see links])

---------- Post added at 10:55 ----------
---------- Previous post was at 10:46 ----------


Skin PlusPlus 8.3.1.xxx

320_240,400_240,480_234,480_272

[Only registered and activated users can see links] ([Only registered and activated users can see links])


Download ([Only registered and activated users can see links])

---------- Post added at 11:24 ----------
---------- Previous post was at 10:55 ----------


Iconx by v200 IGo8.3.x
480x272, 320x240

[Only registered and activated users can see links] ([Only registered and activated users can see links])

pack IconX_320x240_by_ v200 ([Only registered and activated users can see links])

Pack IconX 480x272_by_v200 ([Only registered and activated users can see links])

awirnok
2nd July 2010, 12:44
Dokky skin does not on my 320x240 WinCE 4.2
It gives an error.

How in Skin PlusPlus 8.3.1.xxx turn off icon of traffic events? This feature is nor supported in my country.

IOJI
3rd July 2010, 14:18
iGO 8 diMKaWertVRV Skin 1.1.39 Original - iGO v8.3.x.xxxx

240_320,240_400,320_240,400_240,400_234,416_234,48 0_234,480_272,480_800,800_480

1. Corrections (introduced in 1.1.38) - conversion when restarting the program the name of the intermediate points of the route in the coordinate format, regardless of the status of offroad-mode (thanks Megaduck99 found for any inaccuracy).
2. Corrections - if off the screen saver not working list of POI in the cockpit.
3. Corrections - the cursor location in the vertical mode "2D-to the north" when you return to the cockpit of any state (thanks Megaduck99 found for any inaccuracy).
4. Fixed auto hide / show (depending on the distance to the maneuver), the list of POI in the booth for offroad-regime.
5. For 400_234, 416_234, 480_234, 480_272 increased the font settings of the data fields in the left menu of information by removing the names of the parameters.
6. Minor amendments to automatically change the transparency of the buttons in the cockpit.

[Only registered and activated users can see links]

DOWNLOAD ([Only registered and activated users can see links])

IOJI
4th July 2010, 09:43
IGo Primo Gurjon Night NGJpp1.4_n 02/06/2010

[Only registered and activated users can see links] ([Only registered and activated users can see links])

DOWNLOAD ([Only registered and activated users can see links])

varjomies
5th July 2010, 11:42
[Only registered and activated users can see links] ([Only registered and activated users can see links])[Only registered and activated users can see links] ([Only registered and activated users can see links] 04/07/2010
for iGO8,Amigo and Primo[/SIZE]

2 Profiles "Colors Mountains" in choice announced on the Forum-Compatible Amigo
All resolutions


The big news is the introduction of automation of change heaven.
So you can enjoy four different skies day and night.

GFX : in the root "\ iGO8 \GFX"
Scheme : in the" \ iGO8 \ content \scheme"
skin_night : in the" \Primo \skin_night

[Only registered and activated users can see links]

[url][Only registered and activated users can see links]

varjomies
5th July 2010, 11:57
[Only registered and activated users can see links] ([Only registered and activated users can see links])

psol_journey_3.4AB091016_TC_ADIVOR v 3.1 all Car ++ All Res (8.3.x) 03/07/2010
supported_resolutions="320_240,400_240,480_272"

Version 3.4
=========
a) SAYPDA v.2
b) new speedwarn
c) Bluetooth option
d) option dialer
e) alerting system tutor here VELOX
f) cursor button that calls the center map
g) a change working with skin and igo8.3.2 igo8.3.4
h) detailed map wheel
i) alert drivers working with the data.zip 8.3.2
l) added the option to have the speed 'media map
m) option of the speed limit ', displayed in the map "always" or "if different from the street" or "never"

Attachments:
Details:
- Skin versions: normal, enlarged (AB) themechanger old (CT) and new Themechanger (TC7) and TC8 +
and TCX
- New translations files
- Additional background
- Skin 1999 PSOL ACEs Car read the details
- Skin PSOL ABTC ADIVOR v2 and v2.1 details ADIVOR TC v2 and v2.1
- For the toy car 3d PSOL already contains 'ie the cars' gfx for the rest of the details

[Only registered and activated users can see links]

[Only registered and activated users can see links]


Thanks Psol&kjnaj&ebr9999

varjomies
6th July 2010, 01:16
3DCars v1.3

[Only registered and activated users can see links] ([Only registered and activated users can see links])

Installing 3D Cars:

Extract the 3D Cars folder from the .RAR file and place it in the iGO8 folder.

Add to sys.txt:

[3dcar]
work_dir="\SD Card\iGO8" ;location of 3dCars folder
mortscript="\SD Card\iGO8\Themechanger\MortScript.exe" ;location of MortScript.exe

Alter the following section in sys.txt to change the size of the 3D Cars:

[map]
3d_scale_carmodel=1
3dcarsizemin=2500
3dcarsizemax=5000
3dcarsizemul=25000

Note: These values are the default ones.

Place 3Dcars folder in "iGO8"

Download 3D Cars 1.3 (Now includes Mario Pack, 480x800, 800x480 and restores compatability with Gurjon skin))

[Only registered and activated users can see links]

3DCars1_3.rar ([Only registered and activated users can see links])

xxxxxxxxxxxxxxxxxxxxxxxxxx

3DCars 179cars


[Only registered and activated users can see links] ([Only registered and activated users can see links])



3D car collection Gurjon skin (DVS1 & GJ), and diMkaWertVRV version 1.1.1.28 (179 photo.) - Update 16/05/2010.

3D Cars:
.UNRAR 3D Cars / iGO8
sys.txt

[3dcar]
work_dir="\SD Card\iGO8" ;location of 3dCars folder
mortscript="\SD Card\iGO8\Themechanger\MortScript.exe" ;location of MortScript.exe

sys.txt

[map]
3d_scale_carmodel=1
3dcarsizemin=2500
3dcarsizemax=5000
3dcarsizemul=25000

[Only registered and activated users can see links]

3DCars_179.zip ([Only registered and activated users can see links])
3DCars_Gold_179.zip ([Only registered and activated users can see links])

[COLOR="Red"]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

sk Sbertaud13 Iphone 7.0d EUR+

[Only registered and activated users can see links]


iGO My way 2009 ™ v1.2 & 1.2.1 on IPHONE 30/06/2010
sk_Sbertaud13_Iphone_7.0d_EUR+
New in this version
V7.0d EUR +
- Fixed a bug in the choice of routes after route calculation
The result is that this is NavNGo in data.gro of 1.2.3

- Ability to enable / disable the animations in menu settings / animation (I think it is especially dedicated to those who do not like the animations and Iphones before 3GS)
- Removed code and some unnecessary files IU

- I move from 4.7 to 7.0 for the skin to pick Amigo

[/URL]
REMINDERS:

1 Change of management style sounds for the buttons and radar:

- If you want to be the key sound and the sounds DO NOT have the radar: Copy the wav + Audio Sounds / keys radar "checked +" Warning Voice "= Off
- If you want to be the key sound and have his radar: Copy the wav Audio + Sounds / keys radar "checked +" warning voice "= Claire and Bruno
- If you DO NOT want to be the key sound and DO NOT have his radar: Do not copy the WAV in Audio + Sounds / buttons radar "unchecked
- If you DO NOT want to be the key sound and the sounds have the radar: Do not copy the wav Audio + Sounds / keys radar "checked +" warning voice "= Claire and Bruno

In conclusion:
By copying the sound of keys, if you want the sounds of the radar, you must have the sound of keys

2 FLORENCE TTS Voice Sbertaud13. This voice is compatible with version 1.2 minimum Igo.


3 Possibility of recording the position of his car:
=> Support on the icon saves the position, the icon changes and a little voice will confirm the registration
=> A press on the icon will calculate the route to your car
=> A long press deletes the record

4 For alerts users to type 21 type 24.

You can put the image of your choice will be displayed during the alert. Max: 60x60

Put any such image (s) in the gfx folder (create it if necessary) which will be in your directory Amigo.

Add the following in your sys.txt. Of course if you do not use the type 21, delete lines of type 22.23 and 24.

[Warning]
user_cam21_bmp = "gfx \ MonImageType21.bmp"
user_cam22_bmp = "gfx \ MonImageType22.bmp"
user_cam23_bmp = "gfx \ MonImageType23.bmp"
user_cam24_bmp = "gfx \ MonImageType24.bmp"

!! DO NOT PUT THESE LINES IN YOUR sys.txt IF YOU DO NOT MANAGE PERSONAL ALERT!!


To sound the alarm, you will find in the audio folder (or voice_male voice_male), 4 type sounds wav user_alert21.wav appointed,
user_alert22.wav, and user_alert23.wav user_alert24.wav.

You can put a sound you want in WAV format, for example by replacing user_alert21.wav (yours is the same name of course)

Description of Wav file:
- Rate 705Kbps
- Size of the sample audio: 16 bit
- Channels: 1 (Mono)
- Sampling rate audio 44Khz


[Only registered and activated users can see links]

[URL="[Only registered and activated users can see links]"]sk_Sbertaud13_Iphone_7_0d_EUR+.zip (javascript:void(0);)
sk_English_Sbertaud13_Iphone_7_0d_EUR+.zip ([Only registered and activated users can see links])

Thanks to Sbertaud13

varjomies
8th July 2010, 17:35
3DCars 182

[Only registered and activated users can see links] ([Only registered and activated users can see links])

3D CAR COLLECTION Gurjon skin (DVS1 & GJ), ve diMkaWertVRV VERSION 1.1.1.28 (179 PHOTO.) -UPDATE 06/07/2010.
sys text line must be how,s sdcard calling in your device?
forexa: Storage Card / SDMMC, /SDCARD /My Storage Card etc
1-unrar 3DCars / iGO8
2-unrar Themechanger / iGO8

add sys.txt :

[3dcar]
work_dir="\Storage Card\iGO8"
mortscript="\Storage Card\iGO8\Themechanger\MortScript.exe"

[themechanger]
work_dir="\Storage Card\iGO8"
mortscript="\Storage Card\iGO8\Themechanger\MortScript.exe"

[map]
3d_scale_carmodel=1
3dcarsizemin=9000
3dcarsizemax=12000
3dcarsizemul=30000

DOWNLOAD ( [Only registered and activated users can see links])

IOJI
11th July 2010, 21:19
GJmpp 1.11 320x240 IGo Primo Skin

[Only registered and activated users can see links]

DOWNLOAD ([Only registered and activated users can see links])

kipseter
13th July 2010, 12:48
3DCars v1.3

Installing 3D Cars:

Extract the 3D Cars folder from the .RAR file and place it in the iGO8 folder.

Add to sys.txt:

[3dcar]
work_dir="\SD Card\iGO8" ;location of 3dCars folder
mortscript="\SD Card\iGO8\Themechanger\MortScript.exe" ;location of MortScript.exe

Alter the following section in sys.txt to change the size of the 3D Cars:

[map]
3d_scale_carmodel=1
3dcarsizemin=2500
3dcarsizemax=5000
3dcarsizemul=25000

Note: These values are the default ones.

Place 3Dcars folder in "iGO8"

Download 3D Cars 1.3 (Now includes Mario Pack, 480x800, 800x480 and restores compatability with Gurjon skin))



Are these instructions valid for "untouched" iGO-s? I mean I would not like to use other skins, but I would like replace the blue arrow to a 3d car (like in Amigo)

I tested, I added the lines in sys.txt (SDMMC\MobileNavigator), but not working. :( Do I need anything else than an "untouched" iGO 8.3 and the 3D Cars pack?
varjomines, could you check which 3Dcar pack consists silver Renault Megane?

varjomies
16th July 2010, 02:30
sk igo Montagnes sagfjg v3.6d

[Only registered and activated users can see links] ([Only registered and activated users can see links])[Only registered and activated users can see links] ([Only registered and activated users can see links] DOWNLOAD ([Only registered and activated users can see links])[/LINK]

---------- Post added at 00:46 ----------
---------- Previous post was at 00:40 ----------

Sky_Primo Schemes Beanico v1.1


[Only registered and activated users can see links] ([Only registered and activated users can see links])



480x272

V1.1
Fixed texture of buildings (thank you Leb49 and Sagfjg)

Ins.:
gfx /Primo
12 scheme zip /content/scheme


[URL="[Only registered and activated users can see links]"] DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 00:49 ----------
---------- Previous post was at 00:46 ----------

psol journey 3.4AB TC ADIVOR v3.1


[Only registered and activated users can see links] ([Only registered and activated users can see links])

psol_journey_3.4AB091016_TC_ADIVOR v 3.1 all Car ++ All Res (8.3.x) 12/07/2010
supported_resolutions="320_240,400_240,480_272"

Version 3.4
=========
a) SAYPDA v.2
b) new speedwarn
c) Bluetooth option
d) option dialer
e) alerting system tutor here VELOX
f) cursor button that calls the center map
g) a change working with skin and igo8.3.2 igo8.3.4
h) detailed map wheel
i) alert drivers working with the data.zip 8.3.2
l) added the option to have the speed 'media map
m) option of the speed limit ', displayed in the map "always" or "if different from the street" or "never"

Attachments:
Details:
- Skin versions: normal, enlarged (AB) themechanger old (CT) and new Themechanger (TC7) and TC8 +
and TCX
- New translations files
- Additional background
- Skin 1999 PSOL ACEs Car read the details
- Skin PSOL ABTC ADIVOR v2 and v2.1 details ADIVOR TC v2 and v2.1
- For the toy car 3d PSOL already contains 'ie the cars' gfx for the rest of the details


DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 00:56 ----------
---------- Previous post was at 00:49 ----------

PRIMO Bidru51 EUR V2.0


[Only registered and activated users can see links]

PRIMO Bidru51 EUR+ V2.0 07/07/2010
supported_resolutions=480_272


[Only registered and activated users can see links]
[Only registered and activated users can see links]

News-speed camera standard developed by Eur + Choup: thank you:
Changing the banner-foot (additional funds)
-Creating a banner on top with destination in navigation mode (on / off in settings) with
* Distance
* The total time from the start, and when clicked on display the duration of action (movement) with color change and automatic return to the total
Mode-free destination information of the top banner (distance and travel time) can be displayed on the left above the speed (on / off in settings)
-Changing the background of the next street, which widens or narrows depending on the width of the info (as below with the current position)
-Creating Buttons and funds in night mode (all white before, rebuked those day)
-As Sbertaud, captures photos in "jpg"
-Various fixes

PART Choup RADAR (in common with the skin Sbertaud)

IMPORTANT: You must remove the AUDIO folder and replace with the new downloadable Miojaco.


- A setting to cut the ad over a radar speed-up
- Visual alert in overspeed to radar (Normally in case of over-speed under the radar will flash)
- Added ability to set the maximum height for height limits alerts
- Ability to change the sound of overspeed and the tone of the approach using variables sys.txt:

[Warning]
overspeed_sound = "mon_son1"
approach_beep_sound = "mon_son2"

- Added the ability to customize the 4 icons in the custom alert display the alert. Add in the sys.txt:

[Warning]
user_cam1_bmp = "gfx \ mon_icone1.bmp"
user_cam2_bmp = "gfx \ mon_icone2.bmp"
user_cam3_bmp = "gfx \ mon_icone3.bmp"
user_cam4_bmp = "gfx \ mon_icone4.bmp"

And also add your images in the folder "gfx"


DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 02:30 ----------
---------- Previous post was at 00:56 ----------

3DCARS 210

[Only registered and activated users can see links]

1-unrar 3DCars / iGO8
2-unrar Themechanger / iGO8

add sys.txt :

[3dcar]
work_dir="\Storage Card\iGO8"
mortscript="\Storage Card\iGO8\Themechanger\MortScript.exe"

[themechanger]
work_dir="\Storage Card\iGO8"
mortscript="\Storage Card\iGO8\Themechanger\MortScript.exe"

[map]
3d_scale_carmodel=1
3dcarsizemin=9000
3dcarsizemax=12000
3dcarsizemul=30000

DOWNLOAD ([Only registered and activated users can see links])

IOJI
16th July 2010, 14:16
Fake GJ-Skin 320x240 by BalTac (thanx to GurJon & bb2005) v1.1

[Only registered and activated users can see links]

Based upon DATA.ZIP bb2005 v2 (recommended with this skin), this skin is only for 320x240. Imported and adapted some string and graphics from Gurjon skin v1.9. Can be used with BB2005 V2.1 DATA too witch can be found>>>HERE ([Only registered and activated users can see links])

DOWNLOAD ([Only registered and activated users can see links])

* imported MapChanger from Gurjon Skin. "utility" folder included. (Click on navigation screen and tap on the button on the high-left).
* imported TripInfo_Closed button with 3 trip info summary (during navigation only: Gurjon-skin like)
* activated Turn_Restrictions (thanx to raf04 for the hint)
* added embossed DA_TYPES by viaggiatore38
* changed Trip_Computer button position, to suite Driver Alert when trip_info button is opended
* added trip-average-speed on MENU/speed button (GurJon-skin like)
* added fix for MPH issue in speedcam limit (thanx to jerryh)
* graphical corrections

IOJI
19th July 2010, 10:57
PRIMO Bidru51 EUR V2.1 19 Jul 10

[Only registered and activated users can see links]

THE SKIN IS MORE IN THE BRANDING.ZIP, THEN YOU MUST BE SUBMITTED FOR AN BRANDING.ZIP PRIMO

- Separation of the skin by day and night as foreseen in the original first, choose the skin in "Settings" => "Display"
- Modifying the appearance of some buttons
- Change driving time to time stops
- Click on the distance cycled back to the onboard computer and a long click request to erase data from the computer
- NEW RESOLUTION 320x240
- Lack of space in 320x240 for the banner at the bottom, the display of the altitude and time are in the same place, just click on it to switch from one to another

PART Choup RADAR (in common with the skin Sbertaud)

IMPORTANT: You must remove the AUDIO folder and replace with the new downloadable Miojaco.

- A setting to cut the ad over a radar speed-up
- Visual alert in overspeed to radar (Normally in case of over-speed under the radar will flash)
- Added ability to set the maximum height for height limits alerts
- Ability to change the sound of overspeed and the tone of the approach using variables sys.txt:

[Warning]
overspeed_sound = "mon_son1"
approach_beep_sound = "mon_son2"

- Added the ability to customize the 4 icons in the custom alert display the alert. Add in the sys.txt:

[Warning]
user_cam1_bmp = "gfx \ mon_icone1.bmp"
user_cam2_bmp = "gfx \ mon_icone2.bmp"
user_cam3_bmp = "gfx \ mon_icone3.bmp"
user_cam4_bmp = "gfx \ mon_icone4.bmp"

And also add your images in the folder "gfx"


DOWNLOAD ([Only registered and activated users can see links])


Thanks Eleonora

varjomies
19th July 2010, 20:13
3D CARS PRIMO 107

[Only registered and activated users can see links]

COPY : PRIMO/CONTENT/CAR


DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 20:13 ----------
---------- Previous post was at 19:43 ----------


Are these instructions valid for "untouched" iGO-s? I mean I would not like to use other skins, but I would like replace the blue arrow to a 3d (like in Amigo)

I tested, I added the in sys.txt (SDMMC\MobileNavigator), but not working. :( Do I need anything else than an "untouched" iGO 8.3 and the 3D Cars pack?
varjomines, could you check which 3Dcar pack consists silver Renault Megane?

Ok.Mate i,ll teach you

how can you add 3d car without skin ?

DOWNLOAD ([Only registered and activated users can see links])

unrar 3d cars chose by one forexa only porche folder open it

copy:gfx/igo8

add sys text

[map]
3d_scale_carmodel=1
3dcarsizemin=7000
3dcarsizemax=8000

Enjoy
:wave:

IOJI
22nd July 2010, 11:40
GJmpp 1.12 for Primo

[Only registered and activated users can see links]

1. Fixed bottom menu:
a. Added button "add speedcam"
b. Added auto closure (10 sek).
c. The "route delete" button is now the first delete following intermediate points (if any) and then delete finish.

2. Added auto-completion of the route ("autoshutdown". Added individual menu this function.

3. Altered bottom right info buttons without route.
Formerly there were height, time and speed ... now date, home and work.
Please add to the sys.txt :

[Homework]
home="MY HOME"
work="MY WORK"

Atention! Case sensitive.

4. By popular demand, in case of exceeding speed number will be changed to black at day
and to white at night.

5. Added ability to disable automatic route recalculation (autoreplan).

6. Added ability to enable u-turns.

7. A lot of technical repairs.

DOWNLOAD ([Only registered and activated users can see links])

IOJI
24th July 2010, 13:25
Primo Skin Gurjon 800x480 official version

[Only registered and activated users can see links] ([Only registered and activated users can see links])

varjomies
25th July 2010, 01:36
[Only registered and activated users can see links]

PRIMO Bidru51 EUR+ V2.1a
supported_resolutions=480_272, 320_240

[Only registered and activated users can see links]



THE SKIN IS MORE IN THE BRANDING.ZIP, THEN YOU MUST BE SUBMITTED FOR AN BRANDING.ZIP PRIMO

I ADVISED OF THE USE OF BRANDING AND data.zip

-Recovery of the Mapchanger Gurjon
-Variety correction 320x240


REQUIREMENT:
For the work you must add Mapchanger in sys.txt

(Replace "Storage Card" with the name that gives your camera SD)

[Mapswitch]
1 = "map_ta, \ Storage Card \ primo, 1,"
2 = "map_nt, \ Storage Card \ primo, 1,"


INSTALL_PATH = "\ Storage Card \ primo"



the figure at the end (for a change now as the POI, put 0 for no change as card and operating on the same basis poi)

[U] DOWNLOAD ([Only registered and activated users can see links])

IOJI
25th July 2010, 11:39
Odytsak schemes for IGo8

[Only registered and activated users can see links]
[Only registered and activated users can see links]

[Only registered and activated users can see links] ([Only registered and activated users can see links])

kipseter
25th July 2010, 17:02
Ok.Mate i,ll teach you

how can you add 3d car without A ?

DOWNLOAD ([Only registered and activated users can see links])

unrar 3d cars chose by one forexa only porche folder open it

copy:gfx/igo8

add sys text

[map]
3d_scale_carmodel=1
3dcarsizemin=7000
3dcarsizemax=8000

Enjoy
:wave:

Thx, varjomies, it is easy and now it works cool. :)
This 3d car package is rather different from the others you have uploaded.

IOJI
26th July 2010, 11:01
Primo Skin GJmpp 1.11 480x234 resolution

[Only registered and activated users can see links]

[Only registered and activated users can see links] ([Only registered and activated users can see links])

varjomies
28th July 2010, 15:21
[Only registered and activated users can see links] ([Only registered and activated users can see links])


GJmpp a_mp3 v1.12 27/07/2010
supported_resolutions="480_272"


DOWNLOAD ([Only registered and activated users can see links])

Thanks to alik-11



NavyGJmpp 1.12 480x320 26/07/2010
supported_resolutions="480_320"

[Only registered and activated users can see links] ([Only registered and activated users can see links])

DOWNLOAD ([Only registered and activated users can see links])



TRAFFIC INDICATORS

[Only registered and activated users can see links]
[Only registered and activated users can see links] ([Only registered and activated users can see links])

To create branding.
SET kinds of traffic INDICATORS

Sets in two dimensions.
1. For VGA (640x480 and above) with the size of icons 63X63

ui_igo8_VGA63_.zip ([Only registered and activated users can see links])

2. For QVGA with icons 32x32 size.

ui_igo8_32_.zip ([Only registered and activated users can see links])

Thanks to Andron66



---------- Post added at 15:21 ----------
---------- Previous post was at 15:06 ----------

POI car dealers


[Only registered and activated users can see links] ([Only registered and activated users can see links])


Well then POI car dealers
(Size 40x40)
[Only registered and activated users can see links]

POI_Auto_Dealer_40x40_.zip ([Only registered and activated users can see links])
UNZIP
copy
ui_igo8 folder "NNG/ui_igo8"

Ahmed1
29th July 2010, 03:17
great job i like it
but i have some problems if u can help me with
the download links wont work with me if u can plz upload them to mediafire for example

second thing i have Igo8 nav n go and i wanna know how to add primo or the 3dCars thing and ist possible to it in the Chiness manufacture
thank u

marikello
9th August 2010, 12:01
Hi !
I`m trying to put a 3d cars in to my gps (chinese manuf) running IGo 8.3.2.83157. Did as by instruction, but still I dont see any menu for 3d cars.

Thx in advance.

urx
15th August 2010, 16:17
hi
Is there a skin for Primo that supports resolution 240x320 (for HTC Kaiser)?

varjomies
16th August 2010, 03:08
Sk Primo Sbertaud13 v2.2 EUR+

[Only registered and activated users can see links] ([Only registered and activated users can see links])



Primo/captures
Primo/utility
Primo/content/lang/Lang_French.zip
Primo/content/content/Skin/sk_Primo_Sbertaud13_480_272_EUR+_D.zip

support Igo PRIMO
480x272, 320x240, 800x480 & 480x234

New in this version

V2.2 + EUR

- A long press of the button TMC navigation screen returns within the parameters of the TMC
- Abandonment of the way skin. Branding Only mode allows easy operation of my skin.
- Integration of boot images Night mode (800x480, 320x240 and 480x234)
- Added filter for night mode. Gurjon
- Button Mapchanger deactivated. Settings of the skin / System
- Transparency Buttons DragMode (All together). Settings of the skin / Transparency / DragMode
- Separation of the Menu "Transparency and Tilt" to "Transparency" and "Tilt and Zoom"
- Separation of adjusting the transparency of the limit sign and speed restriction sign.
- Added value 25s, 20s and 15s for the countdown (param of the skin / system)
- 800x480 adapdation the skin to the data of Tangbohu V5.1
- 320x240 - Corrections graphics TMC on the navigation screen
- 320x240 - Correction of discrepancies in the sound menu: Settings speeding Alerts & warning signs
- 320x240 - Fixed display of route recalculation. The 90% was completely right
- 320x240 - Fixed placement of the remote places in search
- 320x240 - Display board computer fixed.
- 320x240 800x480 & - Display Distance remaining (right buttons). I made the best
- 320x240 - Display button on the bottom right (Select City, Save itinerary)
- 320x240 - Various fixes in the display TMC
- Technical adjustment - radar (Choup)
It is advisable to add

[Warning]
speedcam_max_lookahead = 1000

in sys.txt

- WINCE4.2. The mapchanger fonctionne.Il must add an additional line (3 = "\ DataFlash \ primo") to instruction in the sys.txt

[Mapswitch]
1 = "map_ta \ DataFlash \ primo, 1,"
2 = "map_nt \ DataFlash \ primo, 1,"
3 = "\ DataFlash \ primo"

For the 1 = and 2 =

Replacing Data Flash with the name of your drive where your file is installed CONTENT (So for example, Storage Card or My Flash Disk or SD CARD SDMMC or ....)
By replacing the primary name of the file or folder you installed CONTENT (example: MobileNavigator or igo9)

For the 3 =

Replacing Data Flash with the name of your disk where is installed PRIMO (So for example, Storage Card or My Flash Disk or SD CARD SDMMC or ....)
By replacing the primary name of the folder or is installed Primo (example: MobileNavigator or igo9)

DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 02:37 ----------
---------- Previous post was at 02:19 ----------

Sk Primo Sbertaud13 v2.3 EUR+480x272

[Only registered and activated users can see links] ([Only registered and activated users can see links])


Primo/captures
Primo/utility
Primo/content/lang/Lang_French.zip
Primo/content/content/Skin/sk_Primo_Sbertaud13_480_272_EUR+_D.zip

Compatibility: Igo PRIMO 1.1 Resolution supported: 480x272

New in this version V2.3 + EUR


- Skin only for version 1.1 Primo iGo Green
- Display Menu FM transmitter
- Added menus TMC Berylus
- Standard Menus "Navigation" and "Panorama Automatic" it indicates that we are in the top menu "System"
- Change the statement to the script output (sbexitprimo) that removes IMGR.PRL and copy.db

It should be added (edit)

[Sbexitprimo]
1 = "\ DataFlash \ first, \ SDMMC \ Primo"

Replacing Data Flash with the name of your disk where is installed PRIMO (So for example, Storage Card or My Flash Disk or SD CARD SDMMC or ....)
By replacing the primary name of the folder or is installed Primo (example: MobileNavigator or igo9)

Sys.txt

Substituting SDMMC by the name of your disk where your content folder PRIMO (So for example, Storage Card or My Flash Disk or SD CARD SDMMC or ....)
By replacing the primary name of the file or folder is installed your Content (example: MobileNavigator or igo9)

[Warning]
speedcam_max_lookahead = 1000

in sys.txt

- WINCE4.2. The mapchanger fonctionne.Il must add an additional line (3 = "\ DataFlash \ primo") to instruction in the sys.txt

[Mapswitch]
1 = "map_ta \ DataFlash \ primo, 1,"
2 = "map_nt \ DataFlash \ primo, 1,"
3 = "\ DataFlash \ primo"

For the 1 = and 2 =

Replacing Data Flash with the name of your drive where your file is installed CONTENT (So for example, Storage Card or My Flash Disk or SD CARD SDMMC or ....)
By replacing the primary name of the file or folder you installed CONTENT (example: MobileNavigator or igo9)

For the 3 =

Replacing Data Flash with the name of your disk where is installed PRIMO (So for example, Storage Card or My Flash Disk or SD CARD SDMMC or ....)
By replacing the primary name of the folder or is installed Primo (example: MobileNavigator or igo9)



DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 02:47 ----------
---------- Previous post was at 02:37 ----------

GJmpp_v1.12_P1.1: 12.08.2010
[Only registered and activated users can see links] ([Only registered and activated users can see links])

GJmpp_v1.12_P1.1: 12.08.2010


[Only registered and activated users can see links]

GJmpp_v1.12_P1.1_480x272.rar ([Only registered and activated users can see links])

GJmpp_v1.12_P1.1_800x480.rar ([Only registered and activated users can see links])

---------- Post added at 03:00 ----------
---------- Previous post was at 02:47 ----------


PRIMO Bidru51 EUR+ V2.4
supported_resolutions="480_272,320_240"

Eur V2.4 +

[Only registered and activated users can see links] ([Only registered and activated users can see links])

[Only registered and activated users can see links] ([Only registered and activated users can see links])

[Only registered and activated users can see links] ([Only registered and activated users can see links])

[Only registered and activated users can see links] ([Only registered and activated users can see links])

[Only registered and activated users can see links] ([Only registered and activated users can see links])

[Only registered and activated users can see links] ([Only registered and activated users can see links])

v2.4 Eur+
- Fixed a bug in 320x240 at startup
- Fixed bug in 3D zoom and tilt direct navigation screen (accessed by clicking the top left, hold the buttons for a stepless)
- Option in the settings to have the speed in full screen only when overtaking (Special Zephyr)
- Fixed file "Lang"
- Abandonment of the copy of branding.zip in the automatic intallation
- Choice of installing a file "ui_igo9" the primary root, which includes the boot images


REQUIREMENT:
For the work you must add Mapchanger in sys.txt

(Replace "Storage Card" with the name that gives your camera SD)

[Mapswitch]
1 = "map_ta, \ Storage Card \ primo, 1,"
2 = "map_nt, \ Storage Card \ primo, 1,"


INSTALL_PATH = "\ Storage Card \ primo"



the figure at the end (for a change now as the POI, put 0 for no change as card and operating on the same basis poi)

[U] DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 03:08 ----------
---------- Previous post was at 03:00 ----------


Hi !
I`m trying to put a 3d cars in to my gps (chinese manuf) running IGo 8.3.2.83157. Did as by instruction, but still I dont see any menu for 3d cars.

Thx in advance.

can you check 3d car folder ?
is there themechanger and mortscript ?
most of them there,s no . you need to add.

check sys text line and sdcard name is it correct ?

urx
16th August 2010, 21:33
I like to test Primo on my htc kaiser. Unfortunetly skins 320x240 dont work for me - I cant attach car mobile holder sideways. what I really need is skin supporting resolution 240x320. does it exists yet, and where can I found it?
kiitoksia :thanks:

varjomies
19th August 2010, 01:28
sk Primo Picpic45-SB V1.1.1 EUR+

[Only registered and activated users can see links] ([Only registered and activated users can see links])

Compatibility PRIMO Igo v1.1
Resolution Supported 480x272, 800x480
- 800x480 resolution requires the use of data v1.1 arkoko
Thanks to picpic45

DOWNLOAD ([Only registered and activated users can see links])

---------- Post added at 01:28 ----------
---------- Previous post was at 01:19 ----------

Primo Real Scheme

[Only registered and activated users can see links] ([Only registered and activated users can see links])

Primo Real Scheme odytsak
In sys.txt add the following
The first activates all the textures of the buildings.
The next three fade minimize the buildings in navigation.

[3d]
use_all_building_textures = 1
fade_distance_for_car = 0
fade_distance_for_guidance_arrow = 0
fade_overlap_tolerance = 0

DOWNLOAD ( [Only registered and activated users can see links])

rutinh
19th August 2010, 22:22
HI Varjomies,
I follow your instruction when using "sk_Primo_Bidru51_2.4_EUR+_Mioskins.zip"; unfortunately, I am using US-ENG language, I don't understand French language. Therefore, I cannot use the "Lang_French_Bidru51_v2.4.zip" and also the "Audio" folder inside the Skin folder. Do you have US-English for the Audio folder and the zip file for me?
Thank you in advance.

varjomies
20th August 2010, 13:27
HI Varjomies,
I follow your instruction when using "sk_Primo_Bidru51_2.4_EUR+_Mioskins.zip"; unfortunately, I am using US-ENG language, I don't understand French language. Therefore, I cannot use the "Lang_French_Bidru51_v2.4.zip" and also the "Audio" folder inside the Skin folder. Do you have US-English for the Audio folder and the zip file for me?
Thank you in advance.

it,s so much work to do . if i have time i,ll try from igo8 audio to primo .
you may ask easer skin maker .

i don,t use french language but i know what is telling

it ,s calling warning there,s speed cam limited 40 or 50 ...:rofl:

rutinh
20th August 2010, 19:20
it,s so much work to do . if i have time i,ll try from igo8 audio to primo .
you may ask easer skin maker .

i don,t use french language but i know what is telling

it ,s calling warning there,s speed cam limited 40 or 50 ...:rofl:

HI Varjomies,
Thank you for replying my message. I hope that I will have these files (US-Eng ver.) soon when you have available time to create.

awirnok
22nd August 2010, 20:36
Maybe is skin like TomTom interface? Because that interface is very simple for me. So only taskbar in the bottom of screen, wchich with big arrow to turns, and other place for map.

varjomies
26th August 2010, 15:34
igo8.3_plus2/MOD_Matze2

[Only registered and activated users can see links]

igo8.3_plus2/MOD_Matze2 for iGO 8.3.x (version from 21:08:10)
Supported resolutions: 320x240, 240x320, 400x240, 240x400, 480x272 (640x480, 480x640, 800x480, 480x800 by scaling see note)

Please rename the attached 'Lang_German_Pda.zip' (on PNA's use) so that everything is correctly translated (contains the necessary translations for the skin some general corrections).

take speed camera voices for other poi and fire-colored icons and route variations (only Standardfarbschemen) the branding.zip from my accessory pack.

Matze2MOD_Skin.rar - Skin, folders 'utility', info.txt
Matze2MOD_Zubehör.rar - branding.zip, language file update (), color.ini 's, info.txt

Last Update;

Start view
The view at startup (main menu, map navigation, map navigation if prev route map planning) you can now specify in the settings. A sys.txt entry is no longer necessary.
Available at Main Menu> Settings> second page> menu.

Intermediate
It is now set to reach an interim target before selfsame is automatically cleared (several distances selectable) and not upon arrival at the intermediate (default setting).
Available at Main Menu> Settings> Navigation

Keep clicking cockpit Button
The action by clicking on a cockpit Hold Button (2D-3D/Kompass, redirect, position / cursor, menu) is now specified individually.
Available at Main Menu> Settings> Map Display> click and hold the cockpit buttons, various functions for selecting

Phone Button
In the cockpit, can now show a phone button. Click = phone keyboard, click and hold minimize = iGO
To see the main menu> settings> map display, available only if iGO operated on a device with phone function.

Quick Menu
In the shortcut menu is now an additional button to separate off the voice.

Map view
The set on the 3D-2D/Kompassbutton map mode (3D, 2D or 2D direction North) is now permanently preserved. For lovers of the 2D mode so that the switch does not apply to re-launch a new route or simulation.

Address search (Becker builds)
Between the entry of city name or zip code can now switch using a button (thanks Raffke_jr). Only with use of Becker builds available there only as necessary.

Driver Alerts
For friends of the driver alerts they are at now integrated.
Available at Main Menu> Settings> Display Maps> speed and traffic restrictions, only available if one uses the iGO Version Driver support alerts (not da_data.zip required)

Radar Warning
When passing a radar trap nunmer Pieptonsignal can be spent (you must no longer look at the screen to see when you from the danger area)
Available at Main Menu> Settings> Alerts> Radar Warning> each speed camera category

Route calculation variants
The route to be calculated vorauswählbar variants are now in the settings. In the planning mode, the pre temporarily changed.
Available at Main Menu> Settings> Routing> Route variants.
Contrary to the old behavior (always voted out despite five variants were calculated, then just one method more than once) is now actually only the selected variants calculated.

Note:
The currently set method is always computed.
The fixed assignment of color to the method (fast = red, short = green, etc.) is unfortunately passé. This was achieved through a trick anyway, since the color is actually defined by the number variant. Thus, the 1.Variante = red, green, etc. ... 2.Variante = Naja die a death you have to.

Display route variations
The calculated route can be variations in the planning mode, all at the same show (as before in different colors) or separately. The switching is done via the options button (on top). Clicking on a variant button switches only a particular variant visible, click again on the same button again switches to all variants or to switch over to another button a different version visible.
The acquisition of route option is now on hold click on the appropriate button or when only one variant visible on corresponding demand by clicking on the Stop button.

Otherwise, a number of minor technical, functional and visual fixes and improvements.

Notes:
Will you use the skin with a da_data must be in the Skin folder 'ui_igo8' to 'ui_igo8_da be renamed'. For the Driver Alerts but is not required da_data but only the correct version of iGO and matching cards or. Fda-files.
Esp. are in 400x240 and 240x400 are some small (here already annotated) optical error. These are NOT! Error of the Skin's but they result from incorrect or missing. Bmp's in the data.zip. For appropriately corrected data.zip (also suitable for Becker's build), I've provided.

todo
- Native resolutions 480x800 and 800x480
- All changes Raffke_jr for Becker builds
- Sometimes behold what I can think of



[Only registered and activated users can see links]


Matze2_plus2MOD_210810.rar ([Only registered and activated users can see links])
Matze2_Poi_Brand-Icons.rar ([Only registered and activated users can see links])
Matze2MOD_Zubehör.rar ([Only registered and activated users can see links])

Thanks to Matze2

mugglesquop
9th September 2010, 13:08
Goujorn 'GJA2.14' for Primo 1.1

[Only registered and activated users can see links]

IOJI
9th September 2010, 17:09
Goujorn 'GJA2.14' for Primo 1.1

[Only registered and activated users can see links]

Thanks for the share, but you see, skin is all about "looks" and without a screenshot just few people will download the file, people want to see the "improvement". My point of view...

mugglesquop
9th September 2010, 17:31
Thanks for the share, but you see, skin is all about "looks" and without a screenshot just few people will download the file, people want to see the "improvement". My point of view...

i haven't used it, just came across the link so i thought i would post it. If i get it working, i'll post a screen shot.

Rackerz
10th September 2010, 01:30
I have installed Gurjon latest skin and now I am getting this error on Primo startup.

Failed to open file: ui_igo9\480_272\ui\extras_480_272.ui exiting application.

Whats wrong?

varjomies
10th September 2010, 09:25
GJA 1.14 Primo Skin ([Only registered and activated users can see links])


[Only registered and activated users can see links] ([Only registered and activated users can see links])

GJA 1.14 (Only for primo 1.0) & GJA 2.14 (Only for primo 1.1)
supported Resolutions : 480x272, 800x480

1. Added menu for external programs.
Up to 10 programs and one of 30 icons from "gjm_ico_extprg.bmp" can be assigned (this file not RLE compressed, so it possible to view it without problems).
Add to the sys.txt like this:


[extprograms]
;------1 program---------- ; 1 - 10
name1=Total Commander ; Program name
path1=\SDMMC\SOFT\Total Comnmander\cecmd.exe ; Program path
param1= ; Optional, if parameter needed
icon1=15 ; Icon number 0-29 from "gjm_ico_extprg.bmp"


;------2 program----------
name2=Core Player
path2=\SDMMC\SOFT\CorePlayer\Coreplayer.exe
param2=
icon2=13

........

;------10 program----------
name10=Solitaire
path10=\SDMMC\SOFT\game\Solitaire\Solitaire.exe
param10=
icon10=15


Added long tap in the quick menu (when "Skip Navigation Menu" checked) for convenience:
Menu-> External Programs Menu
Settings -> Quick launch of defined program #10

2. Added "2D North Up" map functionality to the "Overview Mode".
3. Technical repairs.




[Only registered and activated users can see links]

GJA 1.143_480х272.rar ([Only registered and activated users can see links]) for primo 1.0
GJA 1.14_480х272.rar ([Only registered and activated users can see links]) for primo 1.1

GJA 1.14_800x480.rar ([Only registered and activated users can see links]) for primo 1.0
GJA 1.14_800x480.rar ([Only registered and activated users can see links]) for primo 1.1

athlonoc
11th September 2010, 00:00
I received a new branding.zip from kimyaci of whom we all should know about.

For some reason I can't get it to work. It's a new branding.zip file to allow me to show branded icons on map like Tesco's, BP, Shell, car dealers etc.

Does anyone have these icons showing on there map and could they give me any help on why maybe my branding.zip doesn't seem to work.

Currently using Primo 1.0 and Gurjon skin 1.14 (480x234)

Thanks

Lee

dzzpapi
12th September 2010, 00:18
Dear All,

How can we install the skin, can any body writes the instruction step by step please !

Thanks

IOJI
12th September 2010, 09:40
Dear All,

How can we install the skin, can any body writes the instruction step by step please !

Thanks

Just put the skin in .zip format in Primo/content/skin and after that you choose it from Igo/Primo menu.

varjomies
14th September 2010, 21:26
iGO Primo User.UPOI Editor

[Only registered and activated users can see links]

Here is a new version of my application translated in English.
With the help of the application you can :
- Import your User.UPOI file (\Save folder) directly to the application.
- Create / edit / delete categories
- Create / edit / delete subcategories
- Drag & drop subcategories to better organize your favorite POIs
- Create / edit / delete POIs with full data supported by iGO (even Phone Number)
- Export category / subcategory to known formats (Google KML etc)
- Import POIs from known formats


[Only registered and activated users can see links]

Download the app from UPOI Editor v1.9 ENG.zip ([Only registered and activated users can see links])

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

GJA_v2.14_Day_CsL_CsS3 for Primo 1.1
[Only registered and activated users can see links]

GJA_v2.14_Day_CsL_CsS3 for Primo 1.1
supported_resolutions="320_240"

[Only registered and activated users can see links]

GJA_v2.14_Day_CsL_CsS3.rar ([Only registered and activated users can see links])

Thanks to jablonex

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

amater Branding


[Only registered and activated users can see links]
[Only registered and activated users can see links]

New branding.zip for 8.5.9.142948 480x272

[Only registered and activated users can see links]

branding.zip ([Only registered and activated users can see links])

---------- Post added at 21:26 ----------
---------- Previous post was at 21:14 ----------

[Only registered and activated users can see links]

PRIMO Bidru51 EUR+ V2.6
Compatibility: Igo PRIMO 1.1 Resolution supported: 480x272

New in version V2.6 + EUR
Arsiv Downloads for Hiden:
- Compatible only with 1.1 PRIMO
- Fixed bug in full screen display of speed
- Return of 320x240 resolution
- New look of the info bar at the bottom of the screen
- Separate settings for transparency between the icons and the bottom frame of information at the bottom of the screen
- Safeguarding the choice of background color in the extras
- Voice announcement at startup that can be turned off in "Settings" => "parameters of the skin" => "system"

============================================
How to customize the ad to start
============================================

Create a personal audio file format. "Wav", then save the file with that name "Startannonce.wav. Copy the file you just created in the folder "audio" from "primary" to replace the old



[Only registered and activated users can see links]

sk_Primo_Bidru51_2.6_EUR+_Mioskins.zip ([Only registered and activated users can see links])
[/URL]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

[B]sk_Primo_Sbertaud13_2_5a_EUR+.zip

[Only registered and activated users can see links]

only Primo 1.1

Primo/captures
Primo/utility
Primo/content/lang/Lang_French.zip
Primo/branding.zip

Compatibility: Igo PRIMO 1.1
Resolution supported: 480x272, 320x240, 800x480 & 480x234

New in this version V2.5a + EUR

V2.5a EUR +
- 480x234 Fixed crash when changing the info buttons on the right.
- Added 320x240 2.0 s for the period after the type (radar)

V2.5 + EUR
- Added 320x240 and 480x234 resolutions
- Fixed display of speed radar (800x480)
- Fixed non-display of the banner up when there is no route

WARNING WARNING WARNING:

The data contains a 480x234 bug to change the info buttons on the right.
So do not try to change these values (if not crash primo)

The 320x240 data is not perfect either. But no crash record.



What data.zip
Arsiv Downloads for Hiden:
480x272 => data.zip original Primo 1.1

480x234 => data from Raf04

Board Index <GPS Navigation <GPS Releases by Category <iGO <iGO Other <Other iGO <iGO Primo v1.1 Data for 480x234 v.1

the site of the mobile enthusiasts

800x480 => data from Arkoko V1.4

Board index <GPS Navigation <GPS Releases by Category <iGO <iGO Other <Other iGO <iGO Primo v1.1 Data for 800x480 version 1.4 2010-08-29

the site of the mobile enthusiasts

320x240 => Data Lucca

Board index <GPS Navigation <GPS Releases by Category <iGO <iGO Other <Other iGO <iGO Primo v1.1 Data for 320x240

the site of the mobile enthusiasts



[Only registered and activated users can see links]

[URL="[Only registered and activated users can see links]"]sk_Primo_Sbertaud13_2_5a_EUR+.zip ([Only registered and activated users can see links] 20/%3E%0A%3Cbr%20/%3E%0A%3Cbr%20/%3E%0A[Only registered and activated users can see links] 0/%3E%0AResolution%20supported:%20480x272,%20320x240 ,%20800x480%20&%20480x234%3Cbr%20/%3E%0A%3Cbr%20/%3E%0A[B]New%20in%20this%20version%20V2.5a%20+%20EUR%3Cbr%2 0/%3E%0AArsiv%20Downloads%20for%20Hiden:%20%3Cbr%20/%3E%0AV2.5a%20EUR%20+%3Cbr%20/%3E%0A-%20480x234%20Fixed%20crash%20when%20changing%20the %20info%20buttons%20on%20the%20right.%3Cbr%20/%3E%0A-%20Added%20320x240%202.0%20s%20for%20the%20period% 20after%20the%20type%20%28radar%29%3Cbr%20/%3E%0A%3Cbr%20/%3E%0AV2.5%20+%20EUR%3Cbr%20/%3E%0A-%20Added%20320x240%20and%20480x234%20resolutions%3 Cbr%20/%3E%0A-%20Fixed%20display%20of%20speed%20radar%20%28800x4 80%29%3Cbr%20/%3E%0A-%20Fixed%20non-display%20of%20the%20banner%20up%20when%20there%20 is%20no%20route%3Cbr%20/%3E%0A%3Cbr%20/%3E%0AWARNING%20WARNING%20WARNING:%3Cbr%20/%3E%0A%3Cbr%20/%3E%0AThe%20data%20contains%20a%20480x234%20bug%20 to%20change%20the%20info%20buttons%20on%20the%20ri ght.%3Cbr%20/%3E%0ASo%20do%20not%20try%20to%20change%20these%20 values%20%28if%20not%20crash%20primo%29%3Cbr%20/%3E%0A%3Cbr%20/%3E%0AThe%20320x240%20data%20is%20not%20perfect%20 either.%20But%20no%20crash%20record.%3Cbr%20/%3E%0A%3Cbr%20/%3E%0A%3Cbr%20/%3E%0A%3Cbr%20/%3E%0AWhat%20data.zip%3Cbr%20/%3E%0AArsiv%20Downloads%20for%20Hiden:%20%3Cbr%20/%3E%0A480x272%20=%3E%20data.zip%20original%20Primo %201.1%3Cbr%20/%3E%0A%3Cbr%20/%3E%0A480x234%20=%3E%20data%20from%20Raf04%3Cbr%20/%3E%0A%3Cbr%20/%3E%0ABoardIndex%20%3CGPS%20Navigation%20%3CGPS%20 Releases%20by%20Category%20%3CiGO%20%3CiGOOther%20 %3COther%20iGO%20%3CiGO%20Primo%20v1.1%20Data%20fo r%20480x234%20v.1%3Cbr%20/%3E%0A%3Cbr%20/%3E%0Athe%20site%20of%20the%20mobile%20enthusiasts %3Cbr%20/%3E%0A%3Cbr%20/%3E%0A800x480%20=%3E%20data%20from%20Arkoko%20V1.4 %3Cbr%20/%3E%0A%3Cbr%20/%3E%0ABoardindex%20%3CGPS%20Navigation%20%3CGPS%20 Releases%20by%20Category%20%3CiGO%20%3CiGOOther%20 %3COther%20iGO%20%3CiGO%20Primo%20v1.1%20Data%20fo r%20800x480%20version%201.42010-08-29%3Cbr%20/%3E%0A%3Cbr%20/%3E%0Athe%20site%20of%20the%20mobile%20enthusiasts %3Cbr%20/%3E%0A%3Cbr%20/%3E%0A320x240%20=%3E%20Data%20Lucca%3Cbr%20/%3E%0A%3Cbr%20/%3E%0ABoardindex%20%3CGPS%20Navigation%20%3CGPS%20 Releases%20by%20Category%20%3CiGO%20%3CiGOOther%20 %3COther%20iGO%20%3CiGO%20Primo%20v1.1%20Data%20fo r%20320x240%3Cbr%20/%3E%0A%3Cbr%20/%3E%0Athe%20site%20of%20the%20mobile%20enthusiasts %3Cbr%20/%3E%0A%3Cbr%20/%3E%0A%3Cbr%20/%3E%0A%3Cbr%20/%3E%0A[Only registered and activated users can see links][URL=%22[Only registered and activated users can see links])

varjomies
24th September 2010, 16:28
GJ6.18p_da

[Only registered and activated users can see links]

Update skin GJ6.18
240х320, 320х240, 240х400, 400х240, 400х234, 416х234, 480х234, 480х272, 800х480, 480х800
Differences from previous version:
1. Fixed button for info about the route in the map planning.
2. Added a command prompt in the menu "to skip the next paragraph.
3. Removed autom. call window "Edit Route" by adding a second prom. point.
4. With disregard for the maneuver (the window with buttons "maneuver", "Street", kilometers) long press of one of these buttons will return to the list of maneuvers route. Briefly - as it was - will return to the cabin.
5. Added support for automatic transition to the "plane" (if enabled in options) after leaving the tunnel. This option is not checked - could not find such spans, so that - should be checked. In addition, it is not clear, as will be after the loss of signal in the tunnel.

[Only registered and activated users can see links]

GJ6.18p_da.zip ([Only registered and activated users can see links])
GJ6.18p_da_480x800_800x480.zip ([Only registered and activated users can see links])

---------- Post added at 16:28 ----------
---------- Previous post was at 16:07 ----------

Who Wants to Have Special Background For The Primo ?

Day & night for 480x272

[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

[Only registered and activated users can see links]
[Only registered and activated users can see links]

mrquick
29th September 2010, 09:07
yes please but do you have it on 800x480 as well

varjomies
3rd October 2010, 17:20
yes please but do you have it on 800x480 as well


Do you mean last post backqround ? it,s scheme it will work for you
and also all skin.

Here: Primo background

[Only registered and activated users can see links]




Bidru51_Eur Primo 2.7 RED
480_272"


[Only registered and activated users can see links]

Day
[Only registered and activated users can see links] ([Only registered and activated users can see links])

Night

[Only registered and activated users can see links] ([Only registered and activated users can see links])



Loading For Special Ipmart Users

[Only registered and activated users can see links]

Boot images igo8 by jeansairien

[Only registered and activated users can see links]
[Only registered and activated users can see links]

jeansairien provides a set of boot images igo8 (loading.bmp). 01/10/2010

[Only registered and activated users can see links]

sk_igo_jeansairien_loading.rar ([Only registered and activated users can see links])



Boot images by Steftuning v1.1

An idea of jcvfamily, Steftuning images start with this band progression 25/02/2009

[Only registered and activated users can see links]
[Only registered and activated users can see links]

[Only registered and activated users can see links]

sk_igo_LOADING-Steftuning-V1.zip ([Only registered and activated users can see links])


Boot images igo8 by Chopi
Chopi offers a set of boot image for igo8 320x240. 20/08/2008

- Unzip the file "branding.zip" in a directory of your choice
- Copy the selected bmp file and then rename 320_240 "loading.bmp"
- Rezipper / recreate the "branding.zip" and copy it to its place on the sd-card.

[Only registered and activated users can see links]

[Only registered and activated users can see links]

sk_igo_Chopi_loading.zip ([Only registered and activated users can see links])


[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]



[Only registered and activated users can see links]

[COLOR=Blue]GJA ·dafunk· v2.16 for Primo 1.1
supported_resolutions="480_272"

Some people after installing my skin mod told me that there is no longer the "Capture Button" in the navigation screen.
I set it's transparency value to "0" by default in the file gjm_models.lua:

because there is no need to have that button in the screen.... IMHO I found it very annoying.
Here I posted how to get screenshots without having that button using a gesture of Primo:

[Only registered and activated users can see links]

GJA_dafunk_v2.16_INTL.rar ([Only registered and activated users can see links])

Thanks to Dafunk

banjokazooie
4th October 2010, 18:28
Hi everyone

[Only registered and activated users can see links]

Want to run games from main menu like in amigo.

:thanks:

rschalie
25th October 2010, 20:23
Hi Everyone,

I'm desperatly looking for a 240x320 iGO Primo skin (so that's portrait, NOT landscape). I can only find landscape skins.

T.I.A.

IOJI
25th October 2010, 20:35
I can only find landscape skins.
T.I.A.

Use that and try to change in sys.txt from:
"screen_x=320
screen_y=240"
to:
Screen_x=240
screen_y=320
It should work......

rschalie
25th October 2010, 20:48
Use that and try to change in sys.txt from:
"screen_x=320
screen_y=240"
to:
Screen_x=240
screen_y=320
It should work......

Nope. This is to be expected, as the relative positions of screen elements in portrait mode will differ from those in landscape mode. I really need a 240x320 data.zip.

varjomies
2nd November 2010, 02:07
GJ6.18p-da

[Only registered and activated users can see links]

Update skin GJ6.18
240х320, 320х240, 240х400, 400х240, 400х234, 416х234, 480х234, 480х272, 800х480, 480х800
Differences from previous version:
1. Fixed button for info about the route in the map planning.
2. Added a command prompt in the menu "to skip the next paragraph.
3. Removed autom. call window "Edit Route" by adding a second prom. point.
4. With disregard for the maneuver (the window with buttons "maneuver", "Street", kilometers) long press of one of these buttons will return to the list of maneuvers route. Briefly - as it was - will return to the cabin.
5. Added support for automatic transition to the "plane" (if enabled in options) after leaving the tunnel. This option is not checked - could not find such spans, so that - should be checked. In addition, it is not clear, as will be after the loss of signal in the tunnel.

[Only registered and activated users can see links]

GJ6.18p_da.zip ([Only registered and activated users can see links])

GJ6.18p_da_480x800_800x480.zip ([Only registered and activated users can see links])

dimkaWertVRV 1.1.41b 29/10/2010

[Only registered and activated users can see links]

supported_resolutions="480_234,320_240,240_320,240_400,400_240,480_272,40 0_234,416_234,480_800,800_480"
only version 8.3.х(8.3.1, 8.3.2, 8.3.4).


diMka by WertVRV: 1.1.41 Beta

Changes.
1. 2 ekraea settings TMS combined into 1.
2. In the list of events TMSZH
- Added ability to switch modes on the route / all
- Added ability to cancel / reset all TMS detours (manual and automatic)
3. Added mode detour Manual (Skin), differs from rodnog mode manually, so that (on my device) does not occur spontaneously unintentional pererasschety.
4. Icon on the button TMS:
- It is not always clear.
- If not found TMS device - red
- If no signal is received - black and white.
5. Fix bounce Trigger event on the route (you can even include sound notification)
6. Repairs.




[Only registered and activated users can see links]

diMkaWertVRV_1.1.41b.rar ([Only registered and activated users can see links])

Thanks to WertVRV

nekmaria
6th November 2010, 10:27
I put the GJA skin 218 in a navigon 2100 maxx which runs from my flash disk where I created a folder primo. the remaining contents of the primo program are in the storage card.
What settings must I do to run the map changer? do i need to do something to sys?

---------- Post added at 10:27 ----------
---------- Previous post was at 10:25 ----------

I put the GJA skin 218 in a navigon 2100 maxx which runs from my flash disk where I created a folder primo. the remaining contents of the primo program are in the storage card.
What settings must I do to run the map changer? do i need to do something to sys?

varjomies
8th November 2010, 20:59
[Only registered and activated users can see links]

GJA skin for Primo 1.1. Version 2.19.1
Requirements: Primo 1.1 (Green routing) GPS system with 480x272 or 800x480 device resolution
Operating System: WM, WinCE
Overview: GJA (gurjon & arkoko) skin for Primo 1.1 Green Routing

Changelog:

v.2.19.1
1. Added setting for select Gurjon or Arkoko cockpit menu.

v.2.19
1. Added fixed speed tolerance to the Overspeed warning (Megaduck99).

2. Added fast menu for easy access to the some program's features.
Access to the fast menu - short tap to the status bar.
Available buttons:
-1- track recording. Long tap: Trip Monitor.
-2- mute/unmute sound. Long tap- sound settings.
-3- screen capture (old capture button removed from the main screen)
or if 'Screen Capture' disabled:
-3- POI visibility Setup. Long tap: Map Settings.
-4- fast Viewpoint change (low/normal/high).
or if 'Manual Zoom & Tilt' enabled:
-4- Day and Night Colour Setup. Long tap: Map Settings.
-5- Screen backlight setting.

3. Reworked backup creation scripts for better performance
(utility package must be updated).

4. Small technical repairs.




Fullpack contains addons and all needed files to the skin correct working (day and night skins, Utility folder, color schemes, external Mapchanger, sources for direct use without skin installation).
Just unpack all to the correct places:

Skin files goes to the content/skin folder. Or if you prefer to use source - unpack _skin_source.rar (ui_igo9 folder) to the Primo root directory. In this case skin files not needed.
utility - copy to the Primo root. Utility folder contains internal mapchanger, panic and clearsave scripts. To correct work *.ini files must be edited for your system environment.
Optional:
Scheme - copy to content/scheme
bluetooth unpack to the root Primo root directory (only if you using this method of BT control).
External MapChanger - unpack to any place, if you are going to use it at all. Edit mapchanger.ini file for correct work.




[Only registered and activated users can see links]

GJA_v2.19.1_480x272_FullPack.zip ([Only registered and activated users can see links])
GJA_v2.19.1_800x480_FullPack.zip ([Only registered and activated users can see links])
[Only registered and activated users can see links]
Scheme.zip ([Only registered and activated users can see links])
utility.zip ([Only registered and activated users can see links])

Thanks to Gurjon & Arkoko

Rickrst
22nd January 2011, 22:18
I have the Dimka skin running at 480*800, works well. How do I get sky textures as that's the only thing i'm missing now.

Rick

lengveni5
23rd January 2011, 00:54
GJA_v2.24_480x272_FullPack:
link ([Only registered and activated users can see links])
GJA_v2.24_800x480_FullPack:
link ([Only registered and activated users can see links])

::J0E::
12th June 2011, 12:14
all 3dcars for PRIMo is dead any one can reupload please
thanks,

hotchef
3rd July 2011, 12:01
can you please re upload the link

thanks

rashkenazi
24th July 2011, 22:00
Help!
in primo 1.2 road signs show in yellow background color (not blue or green). this is in default skin or Dimka skin. is it from the map file or can i change it?
thanks

krugerda
23rd August 2011, 23:49
I need help had just bought a 7" gps unit, wich is running igo primo, I am wanting to add extras like cars but not sure how to , have tried to add zip file to content/cars, but not sure how to set up sys.txt file, this is what mine looks like, and how it came I think it may be the very basic, if anyone can help me, thank you.

;[device]
;type="pearl_gtx60"


[sound]
csv_voice_enabled=1

[power]
backlight_status="0"


[debug]
experimental_features=1

[network]
available = 1

paleskin
17th May 2012, 04:14
iGo8, Amigo, Primo Skins, Schemes, Themes, GFX updated periodically

I think that iGO8 deserve a proper thread where to post all the good stuff that makes it look and work so well, based on big interest for it. Beside TomTom that has lot of fans, iGO, with its versatility and reliability has also a lot, more and more every day. Let's post here all that good stuff that make it so good. If this thread will catch up like thread for maps, i will make it sticky. For beginning, let's start with my schemes and GFX that makes a very realistic navigation experience. I used 360 degrees panorama, so, no matter witch way you go, the image doesn't get repeated. GFX folder goes in iGo8 folder and Real Day/Night Panorama in iGo8/content/scheme folder. Enjoy.

[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]


Download ([Only registered and activated users can see links])

Link's dead, and does it work with the latest version of igo primo (7 february 2012) ?

Rocky III
20th August 2012, 18:46
Which one is the most popular skin for iGO Primo and how to configure for auto rotation if doesn't work by default? For me it looks nice Dimka but when i tried to install auto rotation doesn't work. My changes for Galaxy SII (800x480) in sys.txt do not affect on this skin. I do not have experience to change this and how to do that. I think i have to change something into Dimka's data.zip file.

arnoldas
28th June 2013, 15:49
Hi,new skin for android iGO Primo GjAk_v1.10_AriNe-38T 800х480, 854х480, 960Х540, 1280х720, 1280х800.
656853656854656855
GjAk_v1.10_AriNe-38T.zip - 5.0 Mb ([Only registered and activated users can see links])
[Only registered and activated users can see links]
Branding 800_480,1280x800
branding.zip - 12.6 Mb ([Only registered and activated users can see links])

teddyted
1st September 2013, 13:29
Nėra tokio failo.

arnoldas
1st September 2013, 13:51
All downloads working again

arnoldas
1st September 2013, 14:00
Nėra tokio failo.
jau veikia failai

teddyted
2nd September 2013, 08:52
thank you very much

chockmoose
21st October 2013, 11:29
iGo8, Amigo, Primo Skins, Schemes, Themes, GFX updated periodically

I think that iGO8 deserve a proper thread where to post all the good stuff that makes it look and work so well, based on big interest for it. Beside TomTom that has lot of fans, iGO, with its versatility and reliability has also a lot, more and more every day. Let's post here all that good stuff that make it so good. If this thread will catch up like thread for maps, i will make it sticky. For beginning, let's start with my schemes and GFX that makes a very realistic navigation experience. I used 360 degrees panorama, so, no matter witch way you go, the image doesn't get repeated. GFX folder goes in iGo8 folder and Real Day/Night Panorama in iGo8/content/scheme folder. Enjoy.

[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]


Download ([Only registered and activated users can see links])

Hi, anyone have a link working link to the schemes above?

woodruff1977
12th August 2014, 19:23
no link is working here!!!