cobra changed, flash changed after open simlock with rolis 1.8.............still 000000000000000 imel write failed

ANY 1 KNOW HOW TO FIX IT.........THANKS

Pls dont post twice ur topic sir ... thanks.. we listen to u..

Make sure you had good Flash IC and checked with Rolis 1.8 are the four locked closed after unlocked FFFFF?

if still for locked closed changed new COBBA Ic.. and clear SP lock again and checked.. then if the IMEI still 000000000000 mostly the V16 faulty and make sure ur Flash IC is good

just open eeprom tools>>>>

and write a new EMIE..

that's it... :wink: :idea:

Hi there, pls check the tiny small small conector that's beside the CPU and flash. Cause I have once expirence on that. One of the connector was spoilt and one is dissolder. I find that out throught my microscope. Cause 5210 used to have this kind of problems.
Hope this will help.

Flash the phone with virgin EEPROM and your problem is solved....

Sometime is hardware problem did u try flash with other phone(what i means is other 5210),if still same problem that mean the tools got problem not hp

hi
1st write 2100 full flash and u must change 2100 display.phone will worked.i reparied many 5210 in same method.

flash it with knok it work 100%.. ive get this problem and it was solved

try to change eeprom

Change eeprom 100% solve. But in 5210 eeprom are in the flash IC, so u must change the flash IC with the good one. I always solve this problem in Nokia 3315 and OK.
and once again why when I flash 5210 or 3610 with knok always shown cannot prepaired phone? any idea

replace eeprom

There is broken link between cpu and cobba i.c.

maybe you flash is no good and check you CPU use metel.

change cobba and try again to full flash

and once again why when I flash 5210 or 3610 with knok always shown cannot prepaired phone? any idea

"Power Problem" my friend :wink: