View Full Version : C6 Firmware Fully Working on 5530/5800-Release Files-by PNHT



Ronitvohra
23rd August 2010, 07:01
C6 Firmware Fully Working on 5530/5800-Release Files-by PNHT
[Only registered and activated users can see links]



Nokia 5800Xpressmusic RM-356
You have to download firmware files from the below mentioned links and then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\"



Nokia 5530 RM-504
You have to download firmware files from the below mentioned links and then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-504\"



C6 for NOKIA 5800 RM-356 ([Only registered and activated users can see links])

C6 for NOKIA 5530 RM-504 ([Only registered and activated users can see links])

Download JAF.1.98.62 ([Only registered and activated users can see links])
& launch JAF v1.98.62.exe ([Only registered and activated users can see links])

Set options like in picture below:

[Only registered and activated users can see links]





Tick "Use INI" then select your phone:

Select Nokia 5800 XM With RM-356 or Nokia 5530 RM-504



[Only registered and activated users can see links]

Nokia 5800XM :
JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\"

Nokia 5530
JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-504\"





Now TURN OFF your phone !! and then click FLASH button after that press power button
(don't hold it) on your phone and JAF will start flashing.

You will get the latest Customer firmware of C6 on your respective phones HACKED.

No need of Rompatcher to hack your firmware, and you will get Homescreen like the Nokia C6/N97.

[Only registered and activated users can see links]

Is your phone model not supported by JAF? Look no further, here I will post and update the latest JAF ini files to support new phone models.

Place it in the JAF installation folder and overwrite the existing file. This post will be updated as necessary.

[Only registered and activated users can see links] you want to add your languages to this firmware, please use the tutorial :
TUTORIAL TO ADD YOUR OWN LANGUAGES ([Only registered and activated users can see links])
Download
Nokia Firmware Editor v0.2 by PNHT ([Only registered and activated users can see links])

Download Languages for your phone:
Download ([Only registered and activated users can see links])

You can download awesome Custom wallpapers created by anubhav123 ([Only registered and activated users can see links]) specially for this firmware :
Download ([Only registered and activated users can see links])

Those who would like a complete transparent theme for out
new cute C6
Download ([Only registered and activated users can see links])

Some FAQ"S :

1. If you're not able to add the favorite contacts to the homescreen, do the trick as mentioned below :

First restore your contacts from ovi/pc suite, then copy those business card to memory card then format your phone. Then restore the contacts as: Go to contacts- copy business card-from other memory-select card memory-ok.
post results. The favorite contacts will work :D

2. Solve no license/ No activate option in Adobe readerLE and Quickoffice [Only registered and activated users can see links]

Now you get it as trial after the simple mod given below, then you can activate with ur
licence key or with keygens.


Download ([Only registered and activated users can see links])

Extract and copy the data folder to C:\data\system (Replace the Quick office folder with the supplied one and you will see the "ENTER UNLOCK CODE" option in QUICK OFFICE AND ADOBE READER)


Below you will find modified file for disable all keys light on your 5800 with C6CFW (I think it should works also on real Nokia C6).
1) Download this file: DOWNLOAD ([Only registered and activated users can see links])
2) Apply Open4All patch in RomPatcher.
3) Copy "private" folder into C:\ drive on your phone, and replace all.
4) Just reboot your phone after all, and enjoy!

Second version!
Download ([Only registered and activated users can see links])
White menu key is lighting always when phone is unlocked.
1st version lighted till you pressed menu key.
Notification light still breathing until you unlock, after that it's stopping.

If you want back to behavior before upgrading to custom firmware, I mean you want disable green key light when charging- follow these steps:
1) Download this file: DOWNLOAD ([Only registered and activated users can see links])
2) Apply in RomPatcher Open4All patch.
3) Copy "private" folder into C:\ drive on your phone, and replace all.
4) Just reboot your phone after all, and enjoy!

Added Conversation as sis package (on request):
Download ([Only registered and activated users can see links])

How to install Quick office and Adobe cracked versions :
I formatted my phone, and flashed with the C6 firmware, Nokia 5800Xm RM-356 with the edited rofs2 that I made.

I tried installing Quickoffice Premier and adobe and they worked fine. I am attaching the .app files that you needed to remove three applications, Adobe, Quick office and Zip manager as both these applications has common files.

Follow these simple steps :

Put the .app file(s) into the apps folder (create it if necessary) in your NFE folder

Open NFE and go to Tools>Application Manager>Manage Applications

Then select the .app file you want, and it will delete all the files it is programed to delete

After you are done. just rebuild/repack your rofs2 by clicking the button.

After this, you can get this rofs2 in same folder where you have firmware files with name RM-356_51.0.006_prd.rofs2_rebuilt.V01, then you have to rename this file to RM-356_51.0.006_prd.rofs2.V01 and flash it.

Now, you can install Quick office and Adobe reader. If you still face any problems, do let me know.

Khantastic
23rd August 2010, 07:35
oh!! these people are really making wonders happen
and rep+ for u for sharing

Ronitvohra
23rd August 2010, 08:04
oh!! these people are really making wonders happen
and rep+ for u for sharing

Thanks.. the firmware is awesome and specially the homescreen like n97 makes 5800xm a perfect phone.

hnyuk49
23rd August 2010, 08:27
wow, great work! love you PNHT team! :urtheman: but some more screen shot is aprreciated! ::yourock:

samstacle
23rd August 2010, 09:14
thanx guys thanx a lot its a great job...

Khantastic
23rd August 2010, 09:57
Thanks.. the firmware is awesome and specially the homescreen like n97 makes 5800xm a perfect phone.

yes and now i regret why i sold my 5800.. its just too much fun exploring it... and m missing it... :(( :oom: crazy me

itsmechg
23rd August 2010, 09:58
you guys are awesome... if you can flash 5800 with c6 firmware... can you please enable theme effects on other s60v3 fp2 models... cos am missing those n85 effects on my 6210 Navigator... please help me with this... thanks in advance.........

rnasr
23rd August 2010, 10:13
Nice one, but how to add arabic language to it?

hegezoli
23rd August 2010, 10:52
thanks for the working firmware. it'll once again make our phones come alive.
internet telephone now fully working, as well as other advanced functions. it's really like a brand new phone.

CHANDARAKK
23rd August 2010, 13:53
Wow....rofs2=105m and coo=41m

and original c6 rofs2=29m and coo=110m

:confused::confused::confused:

:urtheman::urtheman::urtheman:

:yourock::yourock::yourock:

cyberlion1
23rd August 2010, 14:33
So we just copy the files in the attachment in the products folder. We do not need to download the firmware files from the navifirm and rename it according to the navifirm files?

joshuab
23rd August 2010, 15:11
looks awesome.....can we switch back to 5800 firmwares after flashing the c6 firmware??

javed2f
23rd August 2010, 16:11
hi,
it was not showing nokia 5530 list on JAF PKEY.i want to select n5530, how its possible to flash my n5530.please help

---------- Post added at 17:11 ----------
---------- Previous post was at 16:19 ----------

there is no green light on CNT when i select my phone on JAF, whats wrong im doing,please help me.

techmetal
23rd August 2010, 16:27
you have to update JAF's database.

Mike

maalicious
23rd August 2010, 16:31
i have tried this, and it is just amazing :) contrast to khan, i would like to say i regret buying a c6 now :)

---------- Post added at 19:01 ----------
---------- Previous post was at 18:59 ----------

javed, there is no rofs3 file because it is not needed anymore, so thats why the green light was not on..just flash it straightaway and enjoy

Khantastic
23rd August 2010, 16:44
i have tried this, and it is just amazing :) contrast to khan, i would like to say i regret buying a c6 now :)

---------- Post added at 19:01 ----------
---------- Previous post was at 18:59 ----------

javed, there is no rofs3 file because it is not needed anymore, so thats why the green light was not on..just flash it straightaway and enjoy

lolx... now we all must say... 5800 is the best phone ever... m still going mad.. lolx
going to try this on my friends 5800

disnomia
23rd August 2010, 19:13
lolx... now we all must say... 5800 is the best phone ever... m still going mad.. lolx
going to try this on my friends 5800

And also I will say 5530! Whatever mods I did to my 5800 I can do them also to my brothers 5530
Cheers!!

javed2f
23rd August 2010, 19:33
i have tried this, and it is just amazing :) contrast to khan, i would like to say i regret buying a c6 now :)

---------- Post added at 19:01 ----------
---------- Previous post was at 18:59 ----------

javed, there is no rofs3 file because it is not needed anymore, so thats why the green light was not on..just flash it straightaway and enjoy

thanks dear.....now i have c6 on my n5530...thanks...

Khantastic
23rd August 2010, 20:44
And also I will say 5530! Whatever mods I did to my 5800 I can do them also to my brothers 5530
Cheers!!

ahan!! thats good, i like 5530 more but prefer 5800 because of gps.. my bro have 5530, gonna try this tonight..

anubhav123
23rd August 2010, 21:39
Wat the f*** !!!!! U guys r crazy. Awesome work PNHT.

Hats off to u !!!!!!!!

:Love::Love::Love:

:urtheman::urtheman::urtheman:

Ronitvohra
23rd August 2010, 22:43
Wow....rofs2=105m and coo=41m

and original c6 rofs2=29m and coo=110m

they have edited the core files too :)


So we just copy the files in the attachment in the products folder. We do not need to download the firmware files from the navifirm and rename it according to the navifirm files?

Yes, just copy the files in the attachment to the product folder, u dont need navifirm files, no need to rename, just download the files uploaded in the attachment and flash it.


hi,
it was not showing nokia 5530 list on JAF PKEY.i want to select n5530, how its possible to flash my n5530.please help

---------- Post added at 17:11 ----------
---------- Previous post was at 16:19 ----------

there is no green light on CNT when i select my phone on JAF, whats wrong im doing,please help me.

you need to update the ini file. let me know if you cant update it, I will uploaded the latest ini file for you.


looks awesome.....can we switch back to 5800 firmwares after flashing the c6 firmware??

offcourse, you can switch back to v51 and above firmware (if available in future) of 5800xm


Nice one, but how to add arabic language to it?

here it goes mate, uploaded for you :D


[Only registered and activated users can see links]

Magnifico
24th August 2010, 00:24
how about free ram? is it more/same/less than with 5800 fw?
does the xpressmusic key still work?

maalicious
24th August 2010, 01:49
magni, i think free ram is more or less the same, and yes the xpressmusic key works fine..

abhra
24th August 2010, 05:34
thanks.the best thing is definitely no need to download the navifirm files.rep++ cheers

Ronitvohra
24th August 2010, 06:58
how about free ram? is it more/same/less than with 5800 fw?
does the xpressmusic key still work?

55+ ram after using opera mini for 3 hours. Everything works man, its a mixture of c6/n97 features that has been ported to 5800xm, but tht doesnt mean 5800xm features wont work . So xpress music key etc works. Give it a try.

javed2f
24th August 2010, 07:06
[QUOTE=Ronitvohra;3231466]they have edited the core files too :)






you need to update the ini file. let me know if you cant update it, I will uploaded the latest ini file for you.


please upload latest ini file.

---------- Post added at 08:06 ----------
---------- Previous post was at 08:00 ----------

hi,
i flashed my phone n5530 successfully. but i have some doubts, pls clarify me,
1.can i give a software update like nokia messaging, ovi msic,flash etc...?
2.when i use slide lock, it lock the phone, on that time red light suddenly off but other two
white and green it goes later.before flashing it was not like that. this is bug? or i done anything wrong?
please

javed2f
24th August 2010, 09:10
i flashed with c6 cfw after that ovi store and quick office,pdf are not working.please help me

Magnifico
24th August 2010, 09:52
55+ ram after using opera mini for 3 hours. Everything works man, its a mixture of c6/n97 features that has been ported to 5800xm, but tht doesnt mean 5800xm features wont work . So xpress music key etc works. Give it a try.

I will flash it today. Will post results...

waveboy2u
24th August 2010, 11:47
what can you tell us about updates?
can we update with c6 firmware that will come next? or with 5800 firmware?
if it is 5800 firmware will we still have c6 look and functionality?
i notice in your video ...after you press *0000# it is written there software version V 10... model c6-00
at my 5800....it is written software v 51.0.006 and model 5800 XM PNHT
is it normal?

hasannaqvi
24th August 2010, 11:50
Working 4 Shared Mirrors for 5800 and 5530 :)

5800 C6 Firmware Download RM-356
[Only registered and activated users can see links]

5530 C6 Firmware Download RM-504
[Only registered and activated users can see links]

mad79boy
24th August 2010, 12:18
Working awesome in my 5800. Thanks man. :yourock:

Magnifico
24th August 2010, 13:15
I just Flashed my 5800 with this fw with german and croatian language.
Works great! Thanks for this!

anubhav123
24th August 2010, 14:17
Hey guys, i ve flashed my 5800 with this firmware & its working like a charm. Here r some screenshots from my phone :


[Only registered and activated users can see links]

The things i didnt like is the standby screen gets rotated when i rotate my phone. But thats no big deal.


[Only registered and activated users can see links]

The 2nd thing i didnt like is i had kept all my pics in separate folders accordingly but after flashing, all the pics are visible together.

PNHT ROCKS

:yourock::yourock::yourock:

---------- Post added at 16:47 ----------
---------- Previous post was at 16:34 ----------

And one more thing, i wanted to ask whether i can make some changes or make some modifications such as addition of some home screens like omnia basic hs, nokia contacts bar etc.??????

Ronitvohra
24th August 2010, 14:26
Hey guys, i ve flashed my 5800 with this firmware & its working like a charm.

And one more thing, i wanted to ask whether i can make some changes or make some modifications such as addition of some home screens like omnia basic hs, nokia contacts bar etc.??????

No, you cant add more homescreens as there are no homescreens. I think you wont need tsunami etc HS as this n97 is wonderful.

---------- Post added at 16:56 ----------
---------- Previous post was at 16:54 ----------


I just Flashed my 5800 with this fw with german and croatian language.
Works great! Thanks for this!
Welcome :)


Working awesome in my 5800. Thanks man. :yourock:
great to know it's working awesome :)

gett
24th August 2010, 14:30
Long live PNHT
:urtheman:
:thanks:

How battery works with this f/w. Is it the same, more or less power consumption?

Ronitvohra
24th August 2010, 14:36
please upload latest ini file.
Updated the ini file posted on the 1st page.


hi,
i flashed my phone n5530 successfully. but i have some doubts, pls clarify me,
1.can i give a software update like Nokia messaging, ovi music,flash etc...?
2.when i use slide lock, it lock the phone, on that time red light suddenly off but other two
white and green it goes later.before flashing it was not like that. this is bug? or i done anything wrong?
please



1.can i give a software update like nokia messaging, ovi msic,flash etc...?
Yes, you can update anything and everything except the firmware files. You can update the 5800xm v51 or above firmware (if releases any in future).

2.when i use slide lock, it lock the phone, on that time red light suddenly off but other two
white and green it goes later.before flashing it was not like that. this is bug? or i done anything wrong?

Its working fine with me. No issues with the red,green buttons, just format the phone and reboot and post results. No bugs for the buttons in this firmware as you mentioned.


i flashed with c6 cfw after that ovi store and quick office,pdf are not working.please help me

Format your memory card, as the firmware itself contains quick office and pdf. don't use restore settings while restoring the backup and everything will work.

Regarding ovi store, you can uninstall the older version reboot if necessary, go to browser and update the ovi store. it will work fine.:)


what can you tell us about updates?
can we update with c6 firmware that will come next? or with 5800 firmware?


You cant update the C6 firmware, but you can update the 5800xm current version i.e. v51 or if any new version comes in future by Nokia.


if it is 5800 firmware will we still have c6 look and functionality?You get the look functionality and features of C6/n97 with the base of Nokia5800 firmware.


i notice in your video ...after you press *0000# it is written there software version V 10... model c6-00
at my 5800....it is written software v 51.0.006 and model 5800 XM PNHT
is it normal?No, the model c6-00 has been changed to 5800 XM PNHT, earlier it was written as c6-00 in the video, but while testing, the tester saw the update of c6-00 due to this. This create confusion amongst the testers, so it was better to get the old Nokia5800 firmware name back. Its little modified as Nokia5800 firmware PNHT and its normal.

anubhav123
24th August 2010, 14:41
No, you cant add more homescreens as there are no homescreens. I think you wont need tsunami etc HS as this n97 is wonderful.


No bro, i dont wanna add tsunami hs. I dont even like tsunami much. As i m crazy abt wallpapers & i like to set walls on desktop but when i try to set wallpapers, the clock widget comes in between. So i wanted to add omnia basic hs with 4 icons at bottom. But i think its nt possible.

:rofl::rofl:

Ronitvohra
24th August 2010, 14:48
Long live PNHT
:urtheman:
:thanks:

How battery works with this f/w. Is it the same, more or less power consumption?

More or less its same for me. There are no mods to overclock the firmware so no heating issues which I usually go through with the other Custom Firmwares tried earlier.

---------- Post added at 17:18 ----------
---------- Previous post was at 17:13 ----------


No bro, i dont wanna add tsunami hs. I dont even like tsunami much. As i m crazy abt wallpapers & i like to set walls on desktop but when i try to set wallpapers, the clock widget comes in between. So i wanted to add omnia basic hs with 4 icons at bottom. But i think its nt possible.

:rofl::rofl:

May be in future, the modders will add tsunami to this awesome firmware. I know you're crazy about wallpapers as you already shared awesome stuff :yourock:with me.

and I know you will customize wallpapers to look good with the clock widget too :) Do share those :thanks:

WarriorMax
24th August 2010, 14:49
Great share. rep++

Here is the video

[Only registered and activated users can see links]

gett
24th August 2010, 14:52
[QUOTE=Ronitvohra;3232183]More or less its same for me. There are no mods to overclock the firmware so no heating issues which I usually go through with the other Custom Firmwares tried earlier.[COLOR="Silver"]

:thanks:


Guys, when I start OGM_JAF_PKEY_Emulator_v3 on WIN7 Ultimate 32 bit it says Not supported Windows software. Any help?
And, should I install ALL drivers when installing JAF? Somewhere I read that I should't re-install cable drivers, becouse they are old?

Barbiox Dogg
24th August 2010, 15:10
Nokia 5800 XpressMusic is the most customizable phone i have ever seen. Now 5800 XM users can now enjoy Home Screen like that of N97 & C6. This is great.

miran0405
24th August 2010, 15:55
I just Flashed my 5800 with this fw with german and croatian language.
Works great! Thanks for this!

Could you update this firmware with german and croatian language please?:hardcry:

nokiaonly
24th August 2010, 16:15
Another great way to squeeze some extra life and enjoyment out of the 5800. With all the cfw's out there, and now this, the phone has grown old nicely since it's introduction. :urtheman:

I can't get the Facebook widget to log in cause I can't choose the connection. I think I need to delete communities and download it again

XL3N7
24th August 2010, 18:14
Any version including greek / english languages? ie a balcan version?

loyagirish
24th August 2010, 18:47
strangly c6 suppose to support smart dailing feature but when i tried this file it fails me can anyone guide around here

maran
24th August 2010, 19:15
Tel me rofs3 file wil b include or not

quen
24th August 2010, 20:44
C6 Firmware Fully Working on 5530/5800-Release Files-by PNHT
[Only registered and activated users can see links]



Nokia 5800Xpressmusic RM-356
You have to download firmware files from the below mentioned links and then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\"



Nokia 5530 RM-504
You have to download firmware files from the below mentioned links and then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-504\"



C6 for NOKIA 5800 RM-356 ([Only registered and activated users can see links])

C6 for NOKIA 5530 RM-504 ([Only registered and activated users can see links])

Download JAF.1.98.62 ([Only registered and activated users can see links])
& launch JAF v1.98.62.exe ([Only registered and activated users can see links])

Set options like in picture below:

[Only registered and activated users can see links]



And select your phone:

Select Nokia 5800 XM With RM-356 or Nokia 5530 RM-504



[Only registered and activated users can see links]

Nokia 5800XM :
JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\"

Nokia 5530
JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-504\"


(On picture is RM-504 but it have to be as mentioned above)



[Only registered and activated users can see links]



Now TURN OFF your phone !! and then click FLASH button after that press power button
(don't hold it) on your phone and JAF will start flashing.

You will get the latest Customer firmware of C6 on your respective phones HACKED.

No need of Rompatcher to hack your firmware, and you will get Homescreen like the Nokia C6/N97.

[Only registered and activated users can see links]

Is your phone model not supported by JAF? Look no further, here I will post and update the latest JAF ini files to support new phone models.

Place it in the JAF installation folder and overwrite the existing file. This post will be updated as necessary.

[Only registered and activated users can see links]


Does this firmware support Chinese language and how do I revert back to v51 if the need arises?

Magnifico
24th August 2010, 21:52
Guys, when I start OGM_JAF_PKEY_Emulator_v3 on WIN7 Ultimate 32 bit it says Not supported Windows software. Any help?
And, should I install ALL drivers when installing JAF? Somewhere I read that I should't re-install cable drivers, becouse they are old?

I had the same problem. You must right-klick the program before starting it and change into win xp compatibility mode. then it works.


I have another problem: The favorite cntacts dont work in my homescreen. i am able to choose favorite contacts in the phonebook, but they arent shown in homescreen. The biggest problem with this: the contacts (which i have put into fav before) are not shown in my phonebook anymore.
anyone have the same problem? how can i solve it? :confused:

btw: sorry my bad baaaad english

starbuck79
24th August 2010, 21:54
And Nokia X6.... please PNHT :-(

Ronitvohra
24th August 2010, 22:35
Another great way to squeeze some extra life and enjoyment out of the 5800. With all the cfw's out there, and now this, the phone has grown old nicely since it's introduction. :urtheman:

I can't get the Facebook widget to log in cause I can't choose the connection. I think I need to delete communities and download it again

test the one I uploaded. Works well.


Any version including greek / english languages? ie a balcan version?

No, but if you want I can post the languages here and you can compile it yourself.


Does this firmware support Chinese language and how do I revert back to v51 if the need arises?
yes, you need to add your languages to this firmware and you can revert back to v51 whenever u want.


Tel me rofs3 file wil b include or not
No, just flash with the files provided above. There will be 6 files to flash. Never include the rofs3 with this file and never rename the files provided above as it will brick your phone. Simply, flash your phone with the attachment files posted on 1st page.


The favorite cntacts dont work in my homescreen. i am able to choose favorite contacts in the phonebook, but they arent shown in homescreen. The biggest problem with this: the contacts (which i have put into fav before) are not shown in my phonebook anymore.
anyone have the same problem? how can i solve it? :confused:


Please try this, first restore ur contacts from ovi/pc suite, then copy those business card to memory card then format your phone, and restore the contacts as: Go to contacts- copy business card-from other memory-select card memory-ok.
post results. :goodluck:

samstacle
24th August 2010, 22:37
hello guys i havent installed this firmware yet because in the firmware files there is a file with 0558982 product code...that means euro1 red...i have an euro1 blue product code (while hacking the v50)...now can i flash with these files or ???

Ronitvohra
24th August 2010, 22:43
hello guys i havent installed this firmware yet because in the firmware files there is a file with 0558982 product code...that means euro1 red...i have an euro1 blue product code (while hacking the v50)...now can i flash with these files or ???

yes you can flash as product code doesn't matter (nicesoni_ash)

XL3N7
24th August 2010, 23:06
No, but if you want I can post the languages here and you can compile it yourself.

That would be great. Thanks

Magnifico
24th August 2010, 23:34
Could you update this firmware with german and croatian language please?:hardcry:

Any version including greek / english languages? ie a balcan version?
You can modify it yourself and put in all languages you like easily WITH THIS TUTORIAL ([Only registered and activated users can see links]). Read the notes in Post No. 6 ([Only registered and activated users can see links]).




Please try this, first restore ur contacts from ovi/pc suite, then copy those business card to memory card then format your phone, and restore the contacts as: Go to contacts- copy business card-from other memory-select card memory-ok.
post results. :goodluck:
Maaaaaaaaan thank you very much, that worked! Great!:thanks:
Next issue: I have jbak taskman installed. when its opened the clock and "slide to open key" doesnt work. when i press the menu key i just see the homescreen a little bit darker, and not the clock... when jbak taskman is closed it works fine again...

Ronitvohra
24th August 2010, 23:40
That would be great. Thanks

Bulgarian_RM-612.Lang

[Only registered and activated users can see links]

Greek_RM-612.Lang

[Only registered and activated users can see links]

Choose the one you want:D

---------- Post added at 02:10 ----------
---------- Previous post was at 02:07 ----------


You can modify it yourself and put in all languages you like easily WITH THIS TUTORIAL ([Only registered and activated users can see links]). Read the notes in Post No. 6 ([Only registered and activated users can see links]).

Thanks for posting the tutorial of the language. I thought to post it. Will add to first post :D



Maaaaaaaaan thank you very much, that worked! Great!:thanks:
Next issue: I have jbak taskman installed. when its opened the clock and "slide to open key" doesnt work. when i press the menu key i just see the homescreen a little bit darker, and not the clock... when jbak taskman is closed it works fine again...

Jbak taskman and handy task manager have compatibility issues with this firmware and you wont be able to use the slide to open key. try uninstalling the jbak tashman and post results. The slide unlock key will work again :D Instead use ramblow it works fine.

Megastar2
24th August 2010, 23:54
.7z ? Unable download file plz upload in zip or rar

Ronitvohra
25th August 2010, 00:04
.7z ? Unable download file plz upload in zip or rar

You can extract it with Winrar. Better compression method and no errors.

PS: Updated the original post with all the languages,Nokia Firmware Editor, custom wallpapers, transparent theme, Some FAQ"S.

Megastar2
25th August 2010, 01:58
^^bt unable 2 dload file wt ucweb.

fakhrealammm
25th August 2010, 03:11
What about the camera result?

samstacle
25th August 2010, 04:07
yes you can flash as product code doesn't matter (nicesoni_ash)

Thanx a lot bro...will flash it soon !!!

Magnifico
25th August 2010, 08:57
What about the camera result?

i cant see any difference to old fw...

bulbuc
25th August 2010, 10:44
1.
With this firmware, we're able to update the phone through the SW application ? (i'm referring only to new firmware which will be released, i learned before that other apps can be installed)

2.
When i lock the keypad (from the lateral button) the green button dissapears but the other 2 - the menu and the red one - fade later . i have a 5530 with these settings: no autolock period, notification lights on, breathing off (anyway, changing these setting to a different configuration didn't work). after several restarts it's the same problem.

3.sometimes the menu is very laggy when accessing the folders from the main menu

any help?
if any of these aren't bugs and is just how the C6 works please specify . thx
(for those having problems with slide unlock: just unistall handy taskman and the slide unlock feature will appear. is just a bug with these 2 app together so maybe this will be fixed)

anubhav123
25th August 2010, 16:31
1.
With this firmware, we're able to update the phone through the SW application ? (i'm referring only to new firmware which will be released, i learned before that other apps can be installed)

2.
When i lock the keypad (from the lateral button) the green button dissapears but the other 2 - the menu and the red one - fade later . i have a 5530 with these settings: no autolock period, notification lights on, breathing off (anyway, changing these setting to a different configuration didn't work). after several restarts it's the same problem.

3.sometimes the menu is very laggy when accessing the folders from the main menu

any help?
if any of these aren't bugs and is just how the C6 works please specify . thx
(for those having problems with slide unlock: just unistall handy taskman and the slide unlock feature will appear. is just a bug with these 2 app together so maybe this will be fixed)

Abt ur 1st que, i really dnt have any ideas & i dont have any such kind of problems as urs on my 5800. My 5800 gets auto locked in 20 secs, all the three keys get off together when i lock the screen. The breathing light was on initially but i switched it off & its working smoothly.

samstacle
25th August 2010, 16:35
i need help guys...i cannot install french language with nfe...i have this message "error repacking firmware.operation aborded" i tryed to change windows compatibility but it doesn't work,and i'm not fine with the qwerty keyboard...

yerman
25th August 2010, 16:40
:urtheman: superb firmware, a must for the 5800, works perfectly, i think phone reception has improved, satnav reception improved big time!!:urtheman:

madurabrain
25th August 2010, 16:45
1.
With this firmware, we're able to update the phone through the SW application ? (i'm referring only to new firmware which will be released, i learned before that other apps can be installed)

2.
When i lock the keypad (from the lateral button) the green button dissapears but the other 2 - the menu and the red one - fade later . i have a 5530 with these settings: no autolock period, notification lights on, breathing off (anyway, changing these setting to a different configuration didn't work). after several restarts it's the same problem.

3.sometimes the menu is very laggy when accessing the folders from the main menu

any help?
if any of these aren't bugs and is just how the C6 works please specify . thx
(for those having problems with slide unlock: just unistall handy taskman and the slide unlock feature will appear. is just a bug with these 2 app together so maybe this will be fixed)


1.before u update u should revert back to yr original 5800 firmware...


2.this is c6 firmware bug...

3.its not happening for me..may be try to hard reset...

gorisha
25th August 2010, 16:49
:urtheman: superb firmware, a must for the 5800, works perfectly, i think phone reception has improved, satnav reception improved big time!!:urtheman:


given before the flash to do a hard reset and whether to format memory card?

gett
25th August 2010, 19:34
I had the same problem. You must right-klick the program before starting it and change into win xp compatibility mode. then it works.

I do that, not works for me. But I have find JAF 2.0 test and it's working on win7.

But another problem. Where I can choose my phone, Nokia 5800 in JAF?

Ronitvohra
25th August 2010, 20:23
I do that, not works for me. But I have find JAF 2.0 test and it's working on win7.

But another problem. Where I can choose my phone, Nokia 5800 in JAF?

Tick the ini to get the 5800. better check the flashing guide or the images posted in 1page.


When i lock the keypad (from the lateral button) the green button dissapears but the other 2 - the menu and the red one - fade later . i have a 5530 with these settings: no autolock period, notification lights on, breathing off (anyway, changing these setting to a different configuration didn't work). after several restarts it's the same problem.

change the settings of autolock to yes.


given before the flash to do a hard reset and whether to format memory card?

Format memory card, while flashing the phone memory will be flashed too. Do backup ur contacts sms etc except settings.

yerman
25th August 2010, 20:41
no need to reset phone or format mem card, i didn't and flashed phone easily

DAVIRO
26th August 2010, 05:33
i have installed the app batterylife on this firmware, but when I clicked on "close keyboard light" the keyboard lights donīt are closed.

teltras
26th August 2010, 14:22
Hi, after I install the C6 firmware and if I want to downgrade my 5800 to v51 is it possible?

thanks

Ronitvohra
26th August 2010, 14:35
i have installed the app batterylife on this firmware, but when I clicked on "close keyboard light" the keyboard lights donīt are closed.

Probably the apps is not compatible with the C6 firmware. Post that apps here so that others can comment on this.


Hi, after I install the C6 firmware and if I want to downgrade my 5800 to v51 is it possible?

thanks

Yes, you can update back ur firmware to v51 and above (if Nokia releases in future)

teltras
26th August 2010, 14:45
[QUOTE=Yes, you can update back ur firmware to v51 and above (if Nokia releases in future)[/QUOTE]



Thanks, is the Portuguese from Portugal language available?

warrior7
26th August 2010, 17:18
I cannot download.It says file cannot be read.Reset by administrator

yerman
26th August 2010, 21:25
anyone else got the quickoffice patch working? I cant. any advice?

Ronitvohra
26th August 2010, 22:07
I cannot download.It says file cannot be read.Reset by administrator

try download from pc.

warrior7
27th August 2010, 15:11
I am downloading it from pc and this is the 7th time it says reset by administrator

Ronitvohra
27th August 2010, 15:27
I am downloading it from pc and this is the 7th time it says reset by administrator

try downloading from :

[Only registered and activated users can see links]

and let me know if it works for you now :)

Kosmiklove
27th August 2010, 20:12
Hey guys, i ve flashed my 5800 with this firmware & its working like a charm. Here r some screenshots from my phone :


[Only registered and activated users can see links]

The things i didnt like is the standby screen gets rotated when i rotate my phone. But thats no big deal.


[Only registered and activated users can see links]

The 2nd thing i didnt like is i had kept all my pics in separate folders accordingly but after flashing, all the pics are visible together.

PNHT ROCKS

:yourock::yourock::yourock:

---------- Post added at 16:47 ----------
---------- Previous post was at 16:34 ----------

And one more thing, i wanted to ask whether i can make some changes or make some modifications such as addition of some home screens like omnia basic hs, nokia contacts bar etc.??????

what is name of this amazing theme?

kh5j
27th August 2010, 21:54
great work
Thanks..........
and rep+ for u for sharing

anubhav123
27th August 2010, 22:38
what is name of this amazing theme?

The name of the theme is Shadow by Blue_Ray. U can find it here :

[Only registered and activated users can see links]

gett
28th August 2010, 12:13
You will get the latest Customer firmware of C6 on your respective phones


I do it!!!!!! Works!!!!

Thanks guys +1 added
:urtheman:


Guys, can I use N97 widgets on this FW?

nokiaonly
28th August 2010, 13:02
Is anyone having a problem with Joikuspot? I can connect my devices to it, but they all say no internet access. I noticed that I'm missing an access point that was available in all previous firmwares. :(

Ronitvohra
28th August 2010, 20:32
I do it!!!!!! Works!!!!

Thanks guys +1 added
:urtheman:


Guys, can I use N97 widgets on this FW?

yes, you can. I have tried N97 widgets and they are working fine.

---------- Post added at 23:02 ----------
---------- Previous post was at 23:01 ----------


Is anyone having a problem with Joikuspot? I can connect my devices to it, but they all say no internet access. I noticed that I'm missing an access point that was available in all previous firmwares. :(

try the setting wizard for the access point setup.

MhmdYousri
28th August 2010, 22:50
Just want to solve buttons light problem and every thing will be OK after that :)

Ronitvohra
29th August 2010, 06:12
Just want to solve buttons light problem and every thing will be OK after that :)


added few mods to the original post. Hope this will help you regarding the light problem issue.

MhmdYousri
29th August 2010, 06:32
added few mods to the original post. Hope this will help you regarding the light problem issue.

Thanks a lot for your help but what i want is the normal behavior of 5800 lights , while locked all lights off except breathing and when unlocked all lights on , not all lights off..

gett
29th August 2010, 10:35
sorry for off topic question

How to put browser cashe on memory card?

This ([Only registered and activated users can see links]) guide doesn't work on my 5800 with C6 FW

Magnifico
29th August 2010, 12:05
Below you will find modified file for disable all keys light on your 5800 with C6CFW (I think it should works also on real Nokia C6).
1) Download this file: DOWNLOAD
2) Apply Open4All patch in RomPatcher.
3) Copy "private" folder into C:\ drive on your phone, and replace all.
4) Just reboot your phone after all, and enjoy!

this doesnt work for me. the lights are all on like before.

EDIT: works now :)

javed2f
31st August 2010, 09:58
hi all,
i am facing big problem after i flashed with the version 11. i have n5530...i flashed my mobile with v 10 before its working fine , after upgrade to v11 by using jaf flash method..i successfully flashed.but the problem is when i am receiving a call or dialling the mobile switch off automatically.pls help with this.i am worried about my mobile.your help will be more appriciated .pls give me a reply.i m waiting..thanks in advance.[COLOR="Silver"]

---------- Post added at 10:58 ----------
---------- Previous post was at 10:57 ----------

anubhav123
31st August 2010, 14:03
hi all,
i am facing big problem after i flashed with the version 11. i have n5530...i flashed my mobile with v 10 before its working fine , after upgrade to v11 by using jaf flash method..i successfully flashed.but the problem is when i am receiving a call or dialling the mobile switch off automatically.pls help with this.i am worried about my mobile.your help will be more appriciated .pls give me a reply.i m waiting..thanks in advance.




let me try this fw n i ll give u my reply.

Ronitvohra
31st August 2010, 14:05
hi all,
i am facing big problem after i flashed with the version 11. i have n5530...i flashed my mobile with v 10 before its working fine , after upgrade to v11 by using jaf flash method..i successfully flashed.but the problem is when i am receiving a call or dialling the mobile switch off automatically.pls help with this.i am worried about my mobile.your help will be more appriciated .pls give me a reply.i m waiting..thanks in advance.[COLOR="Silver"]

---------- Post added at 10:58 ----------
---------- Previous post was at 10:57 ----------

you should reflash again, or try formatting the memory card and phone. it gonna work. :D

javed2f
1st September 2010, 07:39
you should reflash again, or try formatting the memory card and phone. it gonna work. :D
i tried hard rest, formating memory card and even i reflashed,nothing helps.pls help

dacuqz
1st September 2010, 12:45
how to have cfw with indonesian language and vivaz appz?...

prabbie
4th September 2010, 20:27
Please cud someone tell me if I need to flash with the memory card installed in my 58000 XM when using the C6 Firmware v11.0.029? Or can I leave the memory card out? Thx

Ronitvohra
4th September 2010, 23:16
i tried hard rest, formating memory card and even i reflashed,nothing helps.pls help

What OS, RM phone model are you using ? Have you correctly downloaded the RM-504 files for your 5530 ? Its working fine with no problems at all.



Please cud someone tell me if I need to flash with the memory card installed in my 58000 XM when using the C6 Firmware v11.0.029? Or can I leave the memory card out? Thx


Please cud someone tell me if I need to flash with the memory card installed in my 58000 XM when using the C6 Firmware v11.0.029? Or can I leave the memory card out? Thx

you can flash with memory card in it.


how to have cfw with indonesian language and vivaz appz?...

Check this ([Only registered and activated users can see links]), the language tool and languages are posted here with tutorials. Can you elabrote what vivaz appz you are looking for ?

teltras
5th September 2010, 01:45
I think the vivaz is the Conversations

primc
5th September 2010, 13:24
it works great:blast:

Ronitvohra
5th September 2010, 16:35
I think the vivaz is the Conversations

If its conversations, then you can add it in rofs2. Or if you want a sis file of conversations, let me know. I can compile and post it here.

anubhav123
5th September 2010, 19:00
If its conversations, then you can add it in rofs2. Or if you want a sis file of conversations, let me know. I can compile and post it here.

Plz bro, post conversation app in sis package. I need that very badly.

Thnx

Ronitvohra
5th September 2010, 20:52
Plz bro, post conversation app in sis package. I need that very badly.

Thnx


Added as requested mate. check the first post.

anubhav123
5th September 2010, 21:24
Added as requested mate. check the first post.

Thnx mate, much appriciated help from u.

Sorry cant add u rep but willl surely add asap.

drrox
6th September 2010, 02:44
thanx wifi is more stable in this firmware

tEkE
6th September 2010, 19:41
my 5800 becoming boring no more..
thanx bro..
really appreciate this transformation

---------- Post added at 00:41 ----------
---------- Previous post was at 00:40 ----------

my 5800 becoming boring no more..
thanx bro..
really appreciate this transformation

Ronitvohra
7th September 2010, 01:47
my 5800 becoming boring no more..
thanx bro..
really appreciate this transformation

---------- Post added at 00:41 ----------
---------- Previous post was at 00:40 ----------

my 5800 becoming boring no more..
thanx bro..
really appreciate this transformation
great to know your phone is new and interesting again :) enjoy
Posted via Mobile Device

---------- Post added at 04:17 ----------
---------- Previous post was at 04:14 ----------


Thnx mate, much appriciated help from u.

Sorry cant add u rep but willl surely add asap.

have you installed it ? because you will find my thanks for you in the app , check it :)
Posted via Mobile Device

prabbie
7th September 2010, 03:37
Thank you Ronitvohra for your earlier reply, I have another question as I can only find conflicting answers: in JAF do you have to select 'Normal Mode' or not before Flashing? Some tutorials they have selected 'Normal Mode' for the same C6 cfw v11.0.029 and in others they haven't. Many thanks.

Ronitvohra
7th September 2010, 13:24
Thank you Ronitvohra for your earlier reply, I have another question as I can only find conflicting answers: in JAF do you have to select 'Normal Mode' or not before Flashing? Some tutorials they have selected 'Normal Mode' for the same C6 cfw v11.0.029 and in others they haven't. Many thanks.

When you tick normal mode, you will get the test mode screen on phone which is much safer while flashing and doing factory reset.

Else, you can also flash your phone with not ticking the normal mode.

I usually flash my phone with ticking normal mode and also factor set too.

anubhav123
7th September 2010, 16:01
have you installed it ? because you will find my thanks for you in the app , check it :)


Yes bro, i ve installed the app & saw u thanking me in that. Again thnx for the app.

:ilove::ilove:

gabriel_9
10th September 2010, 16:27
i have problem downloading apps from ovi store
it seems that ovi detect my phone as c6 :D
does anyone have the same problem?

and one more thing
does anyone have a link to working nokia messaging for this 'mod'?

thanks

---------- Post added at 20:27 ----------
---------- Previous post was at 20:19 ----------

i have problem downloading apps from ovi store
it seems that ovi detect my phone as c6 :D
does anyone have the same problem?

and one more thing
does anyone have a link to working nokia messaging for this 'mod'?

thanks

ALEKSDKS
11th September 2010, 00:17
jaf doesnt work on my pc.. :( is there any way to flash this firmware thru phoenix??? and dont tell me to run jaf in compatibilty mode lol i tried everything but no luck!!
by the way i have windows 7..

Ronitvohra
12th September 2010, 01:22
jaf doesnt work on my pc.. :( is there any way to flash this firmware thru phoenix??? and dont tell me to run jaf in compatibilty mode lol i tried everything but no luck!!
by the way i have windows 7..

No I will never suggest for phoenix. I am also using Win 7 64bit, and using Jaf in compatibility mode, and flashed my phone more than 200 times and it never give any problem.

Which version of Jaf are you using ? can you post the error here ?

ALEKSDKS
12th September 2010, 13:14
i have this jaf version and i have installed it and uninstalled it alot of times..

and yes will install it again now.

ALEKSDKS
12th September 2010, 13:26
ok here we are i get this kinda error everytime i try to install jaf.. afer this error jaf continue installing but it doesnt works.. lol

which version do you have mate??

Ronitvohra
12th September 2010, 21:14
ok here we are i get this kinda error everytime i try to install jaf.. afer this error jaf continue installing but it doesnt works.. lol

which version do you have mate??

lol this error is normal, I think you havent check the jaf installation tutorial. You would probably get two errors while installing jaf, Just ignore these error and get the installation completed, then change the compatibility mode and run as administrator. It will work.:good2:

You are using emu v5, and I am using emu v3. The jaf version is same. So, I would suggest to download this version,

download ([Only registered and activated users can see links])

Ignore the errors, and do as mentioned above. Do post results.

ALEKSDKS
13th September 2010, 00:20
installed it and accepted all driver security checks. lol i think that tomorrow will try to flash my phone lol. wish me luck tho. hahahh

Ronitvohra
13th September 2010, 06:45
installed it and accepted all driver security checks. lol i think that tomorrow will try to flash my phone lol. wish me luck tho. hahahh

Hope to see your phone with C6 firmware. :LoL::goodluck:

dreben23
13th September 2010, 20:46
Is there any appropriate solution Quick office and Adobe reader to be unlocked or probably a keygen or any existing serial number? Appreciate your help!

Ronitvohra
13th September 2010, 21:19
Is there any appropriate solution Quick office and Adobe reader to be unlocked or probably a keygen or any existing serial number? Appreciate your help!


Well, you can find a keygen for the working adobe office ? and adding it by modding both the QO and adobe to take the codes.

Else, if you know how to cook a firmware, you can add .app to delete both the applications and install the application that are already cracked available here. I can made the working .app to delete these apps in 5 mins and then you are ready to go.

If you are not able to use any of the two options :oops2:, I would suggest to use mobi office suite working version which is also available in the forum.

anubhav123
13th September 2010, 21:42
Well, you can find a keygen for the working adobe office ? and adding it by modding both the QO and adobe to take the codes.

Else, if you know how to cook a firmware, you can add .app to delete both the applications and install the application that are already cracked available here. I can made the working .app to delete these apps in 5 mins and then you are ready to go.

If you are not able to use any of the two options :oops2:, I would suggest to use mobi office suite working version which is also available in the forum.

Plz bro, make the .app file to get those two apps deleted coz i want to update those versions. Its my humble request & sorry for making so many requests.

:urtheman::urtheman:

dreben23
13th September 2010, 22:04
I don't want to flash my phone again, (if you suggested this) thanks for this suggestion but if there is a keygen as you say, can you please give me a link to download it. I just want to use adobe reader to open .pdf files and yes I like more office suite too but it doesn't open .pdf files. Tried a free pdf reader but it's quite slow and in my opinion that makes it useless. Is it possible the installed folder to be replaced with the one from the cracked applications?

Ronitvohra
13th September 2010, 22:21
Plz bro, make the .app file to get those two apps deleted coz i want to update those versions. Its my humble request & sorry for making so many requests.

:urtheman::urtheman:

Pm sent with your request including the .app mod file to remove these applications. Will try to add all the .app files with the tutorials later to the first post.

---------- Post added at 00:51 ----------
---------- Previous post was at 00:39 ----------


I don't want to flash my phone again, (if you suggested this) thanks for this suggestion but if there is a keygen as you say, can you please give me a link to download it. I just want to use adobe reader to open .pdf files and yes I like more office suite too but it doesn't open .pdf files. Tried a free pdf reader but it's quite slow and in my opinion that makes it useless. Is it possible the installed folder to be replaced with the one from the cracked applications?

Hmmm..I thought we have a working keygen with these two applications in our application section??. If you have tried and no keys work, then you will have to flash your phone again with edited rofs2. :(

I personally have the genuine keys to activate both the applications.

1. Either, you can remove these application with .app files with the help of Nokia firmware editor.

2. Or, as you mentioned, you need to replace the folder with the crack application folder extracted by you. but, for this too you still have to edit the rofs2 and copy/replace the office and adobe version with the crack one and delete and install the apps :(.

dreben23
13th September 2010, 22:37
No, I haven't tried keys, because I could not find them. So, without flashing it's impossible the folder to be replaced both the cases, isn't it? What about just replacing the folder with Xplore?

Ronitvohra
13th September 2010, 23:08
No, I haven't tried keys, because I could not find them. So, without flashing it's impossible the folder to be replaced both the cases, isn't it? What about just replacing the folder with Xplore?

May be you should try this,


[Only registered and activated users can see links]

[Only registered and activated users can see links]

Else, I am gonna flash my phone to get the default QO and adobe and then will experiment what are the alternatives for you. I will let you know soon.

PS: Do let me know if the above method doesnt work for you so I will flash my phone :)

dreben23
13th September 2010, 23:51
Thank you a lot, I'll read these carefully because I haven't known about that so far. I'll keep you posted, promise. But flashing your phone and experimenting would be much more useful for the others that will come upon the same problem than this single solution. Thanks again for all your efforts.:ilove:

P.S. It didn't work. Please, try something!

gabriel_9
14th September 2010, 18:48
ok... i ve been testing the c6 mod for about a week now...
my phone performance slightly increasing (may be because the hard reset and clean mmc)

unfortunately the battery life drop quickly, if i use the 3G its only last about six hour :D

and one more thing, i put large mp4 file on the mmc (abt 700mb) the file become corrupt after few days... dont know why...

---------- Post added at 22:48 ----------
---------- Previous post was at 22:47 ----------

ok... i ve been testing the c6 mod for about a week now...
my phone performance slightly increasing (may be because the hard reset and clean mmc)

unfortunately the battery life drop quickly, if i use the 3G its only last about six hour :D

and one more thing, i put large mp4 file on the mmc (abt 700mb) the file become corrupt after few days... dont know why...

dreben23
14th September 2010, 20:44
Any development about my problem with the offices?

Ronitvohra
15th September 2010, 10:41
Any development about my problem with the offices?

Yes, the best solution I came up with is you have to flash your phone. I formatted my phone :(, and flashed with the C6 firmware, Nokia 5800Xm RM-356 with the edited rofs2 that I made.

I tried installing Quickoffice Premier and Adobe reader and they worked fine. I am attaching the .app files that you needed to remove three applications, Adobe, Quick office and Zip manager as these applications has common files.

Check out the first thread for the .app file you need including the steps you need to follow.

PS: I will also upload the edited rofs2 soon.

dreben23
15th September 2010, 14:44
Thanks again! I see it's the only solution but for now I won't flash my phone again because it should be for the third time and I have to install all my applications. Though. I'll be waiting for the edited .rofs and who knows some day I can decide to flash it again. Rep+ to all your efforts.:Love:

Ronitvohra
15th September 2010, 21:30
lol you can flash without uda, and you don't have to install anything. As you already flashed 3 times i suggest you to enjoy the firmware now :). I will upload the rofs2 tomorrow , online through mobile right now, between i flashed my phone almost 200times from the day I purchased it.

Pepi1974
15th September 2010, 22:44
I have problem: at first step: when I use option "use ini" JAF says: no ini found.
Then he try at location of JAF but found nothing.
Please help

blacx_09
16th September 2010, 14:11
the file is too big...it a problem for me...my phone cant startup..!! need guide for replacing this CfW for flashing.!

Ronitvohra
16th September 2010, 19:23
I have problem: at first step: when I use option "use ini" JAF says: no ini found.
Then he try at location of JAF but found nothing.
Please help
What operating system are you using? Have you checked the jaf tutorial ?



the file is too big...it a problem for me...my phone cant startup..!! need guide for replacing this CfW for flashing.!

File is too big ? I am not sure, but I think you are trying to flash your phone with rofs3 too ? You need to flash your phone with the files provided in the C6 firmware (6 files). Can you explain your problem in detail please.

Pepi1974
16th September 2010, 22:53
I am using XP SP3 ,and no I didnot check it. So in manual is answer to my question?

drrox
17th September 2010, 00:56
browser problem ............... cant open googled links

CHANDARAKK
17th September 2010, 03:29
I am using XP SP3 ,and no I didnot check it. So in manual is answer to my question?

read this

[Only registered and activated users can see links]

if still problem u can select 1 by 1 for flash

Pepi1974
17th September 2010, 13:46
read this

[Only registered and activated users can see links]

if still problem u can select 1 by 1 for flash

For some reason JAF need to get first official files, and then found directory without problem. Flash without any problem .
Great CFW!!!
Thanks for all:wave:

---------- Post added at 12:46 ----------
---------- Previous post was at 10:49 ----------

I think I discovered "one bug"

I was able to personalize profile immediately after flashing. But when I restore contacts, messages and other stuff via Ovi Suite, I cannot personalize any more. The phone put me back to screen when I choose profile. Can someone verify this, and maybe give me some solution?
P.S Only GENERAL profile is affected, any other can be changed

Ronitvohra
17th September 2010, 21:03
For some reason JAF need to get first official files, and then found directory without problem. Flash without any problem .
Great CFW!!!
Thanks for all:wave:

---------- Post added at 12:46 ----------
---------- Previous post was at 10:49 ----------

I think I discovered "one bug"

I was able to personalize profile immediately after flashing. But when I restore contacts, messages and other stuff via Ovi Suite, I cannot personalize any more. The phone put me back to screen when I choose profile. Can someone verify this, and maybe give me some solution?
P.S Only GENERAL profile is affected, any other can be changed

Well, probably you have restore the settings including messages and contacts that is not recommended at all. I always find ovi as buggy and it is confirmed by other users using C6 CFW. Try restoring contacts and messages, leave everything apart and it should work fine.

I usually restore my contacts and messages, notes etc from pc suite except the settings. I use ovi suite only to load maps.

Pepi1974
17th September 2010, 21:19
My frend also told me, but was to late :( I try after that to delete my contacts, and restore it from memory card, but that doesn't help me: Will master ( hard reset ) solve this or I need to reflash it?

dreben23
17th September 2010, 22:06
I flashed my phone with .app QO and adobe +zip, nothing happened. Now I have one more problem can't install zip manager any more. Read the whole thread in PHTN forum, one says it's working the others not working. I am exhausted trying and trying. Can someone make edited rofs2 with menu in bulgarian. a phonetic keyboard (cyrilic) under German language and the other mods working well, please? I would like to install adobe reader and zip manager because now it says 'component built in'.

Ronitvohra
17th September 2010, 22:22
My frend also told me, but was to late :( I try after that to delete my contacts, and restore it from memory card, but that doesn't help me: Will master ( hard reset ) solve this or I need to reflash it?

Try hard reset and restore the contacts from memory card. It also works. :) No need to flash again.

PS: Never restore your settings as this will mismatch with 5800xm and C6 CFW setting files.

Pepi1974
17th September 2010, 22:38
Just do that and it works !

Thanks!!!!!

Ronitvohra
17th September 2010, 23:59
Just do that and it works !

Thanks!!!!!


Great to know that. My pleasure.

mehluli
20th September 2010, 16:18
I did it... great feel with this firmware!!!!
BUT am beginning to notice strange things:
1. I just decided sometime to restart my device and guess what, when I switch in on again, it goes to the NOKIA screen, stays there for sometime and switches off.
This happened for sometime until I had to hard reset the phone.... and after re-installing my applications which I had in Original 5800, it did the same thing again when restarted.

What could be the issue?

Possibly I suspect, but am not sure... when I flashed it, JAF confirmed that it is finished but the phone kept on with the NOKIA screen which shows up when flashing. I had to disconnect it after sometime and switch it on/off manually to get it on to the new firmware... could that have caused this?

---------- Post added at 15:18 ----------
---------- Previous post was at 15:16 ----------

I did it... great feel with this firmware!!!!
BUT am beginning to notice strange things:
1. I just decided sometime to restart my device and guess what, when I switch in on again, it goes to the NOKIA screen, stays there for sometime and switches off.
This happened for sometime until I had to hard reset the phone.... and after re-installing my applications which I had in Original 5800, it did the same thing again when restarted.

What could be the issue?

Possibly I suspect, but am not sure... when I flashed it, JAF confirmed that it is finished but the phone kept on with the NOKIA screen which shows up when flashing. I had to disconnect it after sometime and switch it on/off manually to get it on to the new firmware... could that have caused this?:oops2:

Pepi1974
20th September 2010, 16:40
Possibly I suspect, but am not sure... when I flashed it, JAF confirmed that it is finished but the phone kept on with the NOKIA screen which shows up when flashing. I had to disconnect it after sometime and switch it on/off manually to get it on to the new firmware... could that have caused this?:oops2:



I noticed that all flashing complete in that way you describe. So I don't think it is reason, but wait until some one with bigger knowledge then is mine confirm this

anubhav123
20th September 2010, 19:16
I did it... great feel with this firmware!!!!
BUT am beginning to notice strange things:
1. I just decided sometime to restart my device and guess what, when I switch in on again, it goes to the NOKIA screen, stays there for sometime and switches off.
This happened for sometime until I had to hard reset the phone.... and after re-installing my applications which I had in Original 5800, it did the same thing again when restarted.

What could be the issue?

Possibly I suspect, but am not sure... when I flashed it, JAF confirmed that it is finished but the phone kept on with the NOKIA screen which shows up when flashing. I had to disconnect it after sometime and switch it on/off manually to get it on to the new firmware... could that have caused this?:oops2:


I dont think that there is anything wrong with flashing process, its perfectly ok. I guess the problem is with those apps which u installed after flashing.

If the problem exists for long, i suggest u to just reflash ur phone.

ennamma
20th September 2010, 20:20
I done every step right, when i clic flash and switch power on in the status it shows searching for phone...
Phone not found
i tried thousands of time pls help...
i ve been reading all tutorials for weeks.
pls help solve this issue

anubhav123
20th September 2010, 20:53
I done every step right, when i clic flash and switch power on in the status it shows searching for phone...
Phone not found
i tried thousands of time pls help...
i ve been reading all tutorials for weeks.
pls help solve this issue

Just connect ur usb cable to another port & this problem will get solved. I was suffering from this problem some time ago & solved it by changing the usb port.

Hope this could help u.

ennamma
21st September 2010, 03:38
Just connect ur usb cable to another port & this problem will get solved. I was suffering from this problem some time ago & solved it by changing the usb port.

Hope this could help u.
but whenever i connect my mobile with pc using data cable it gets connected. Only while flashing it says phone not found. And i tried in two different pc.
PS: do we need to have pc suite installed as well?

Ronitvohra
21st September 2010, 03:39
Possibly I suspect, but am not sure... when I flashed it, JAF confirmed that it is finished but the phone kept on with the NOKIA screen which shows up when flashing. I had to disconnect it after sometime and switch it on/off manually to get it on to the new firmware... could that have caused this?:oops2:

I think you haven't flashed correctly. Before flashing, try formatting your memory card, hard reset and then reflash it again. Do save your flash log ready if you still face any problem.


but the phone kept on with the NOKIA screenWas that the test mode screen of Nokia ?


I dont think that there is anything wrong with flashing process, its perfectly ok. I guess the problem is with those apps which u installed after flashing.

If the problem exists for long, i suggest u to just reflash ur phone.

No, I don't think Symbian ever developed any apps like that that can create such big troubles. :)

Ronitvohra
21st September 2010, 03:59
I done every step right, when i clic flash and switch power on in the status it shows searching for phone...
Phone not found
i tried thousands of time pls help...
i ve been reading all tutorials for weeks.
pls help solve this issue

first thing to do as Anubhav said to change port and second mine was detected by putting on charge just for 2 sec ( then dont push Power Button ) it will be flashed with your desired CFW.

ennamma
21st September 2010, 16:10
first thing to do as Anubhav said to change port and second mine was detected by putting on charge just for 2 sec ( then dont push Power Button ) it will be flashed with your desired CFW.
tried both the tricks, still facing same problem...

kun_ken
24th September 2010, 15:39
Hi, Guys

I have plan to flash my 5530.

If I add more language, Can I change the whole menu into another language?

For example, If I add Thai language, Can I change whole Menu into Thai language?

Thanks for your great work!

:urtheman: :thanks:

Ronitvohra
24th September 2010, 16:21
tried both the tricks, still facing same problem...

please post the screenshot or the log.

Ronitvohra
24th September 2010, 16:22
Hi, Guys

I have plan to flash my 5530.

If I add more language, Can I change the whole menu into another language?

For example, If I add Thai language, Can I change whole Menu into Thai language?

Thanks for your great work!

:urtheman: :thanks:

I am not sure mate about the language, as my native language is English. May be other modders can help you on this - to change the menu in Thai language.

adorableanis
4th October 2010, 06:31
Hello guys,
Just wanted to know how long does it normally to flash the phone? Mine just says "....................Loader Sent!
Stage 2 starting................." and has been like this for quite a time.

Also, when pushing the power button, JAF says "
Reading SW version...Error reading rap ver!". But if I turn the phone on and then press flash, the phone resets and then JAF displays till ".......Stage 2 starting..." and then just stays like that. By now I have tried around 3 times with the same results.

UPDATE: I ticked "Dead USB" and tried again, doesn't work. Here's the log:

Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..................PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
...........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Phone rebooted but not in flash mode...


UPDATE 2: Never mind, I figured it out!:wave: Trying out the new firmware now. :dance:

rohitruls
4th October 2010, 17:11
hi guys.... i flashed it properly. but the phone doesn't switch on...... is there some product code issue...? cos i think my product code is different...!

anubhav123
4th October 2010, 18:44
hi guys.... i flashed it properly. but the phone doesn't switch on...... is there some product code issue...? cos i think my product code is different...!

No matter what ur product code is, this should work . U must reflash ur phone.

Ronitvohra
4th October 2010, 19:04
No matter what ur product code is, this should work . U must reflash ur phone.

anubhav123 is correct. May be you havent flashed correctly. Your 5800XM phone should be RM-356 too.

hiz
8th October 2010, 00:29
guys i keep getting this, can anyone help please?

Searching for default location of ini...
Checking path: \Products\RM-356\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE

I've extracted the V11.0.029 (found on this forum) to that folder...still nothing found?

anubhav123
8th October 2010, 20:07
guys i keep getting this, can anyone help please?

Searching for default location of ini...
Checking path: \Products\RM-356\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE

I've extracted the V11.0.029 (found on this forum) to that folder...still nothing found?

You can select those files manually. Just click on the MCU & browse to the folder whr have u placed those files for flashing. Select the .COO file. Repeat the same procedure with PPM & APE variants. For PPM select rofs2 file & For APE select .uda file.

Read the tutorial for further info....
HERE ([Only registered and activated users can see links])or the attachment.

hiz
9th October 2010, 03:32
You can select those files manually. Just click on the MCU & browse to the folder whr have u placed those files for flashing. Select the .COO file. Repeat the same procedure with PPM & APE variants. For PPM select rofs2 file & For APE select .uda file.

Read the tutorial for further info....
HERE ([Only registered and activated users can see links])or the attachment.

Thanks mate...uploaded manually, but it cannot find my phone? Ive got a noka 5800..I switch it off and press the power on button (I dont hold it) and it just says no phone detected?

CHANDARAKK
9th October 2010, 04:09
Thanks mate...uploaded manually, but it cannot find my phone? Ive got a noka 5800..I switch it off and press the power on button (I dont hold it) and it just says no phone detected?

if u use manual sellect u need to rename ur mcu first like this RM-356_51.0.006_prd.core.C0r

and also see my method+vdeo too

[Only registered and activated users can see links]

edisontan
20th October 2010, 12:19
why after i install the quickoffice in my nokia5800, it still show "You Do Not have a license for this feature. Purchase or continue?"

Anyone can solve this ?

Mubi2k10
21st October 2010, 01:07
how to do this on a x6??

anubhav123
21st October 2010, 20:34
how to do this on a x6??

U cant do this on X6 as this is a custom fw for 5530 & 5800 only.

matish
22nd October 2010, 15:10
Hey,
A bit of a silly question...
I'm new to this business. Downloaded and installed JAF, while installing it asked me to change the driver for Nokia Cable and I pressed OK.
Found out that I can only run JAF using the JAF emulator. Still gives me an error "BOX DRIVER NOT INSTALLED" but will run the application.

Changed the settings to match these in the instruction here-
[Only registered and activated users can see links]
Connected my phone (5800) using USB. (BTW does it matter if I choose PC Suite or something else?)
The problem is that JAF can't find the CFW files. I've tried saving them in -
C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356
or
C:\Program Files\Common Files\Nokia\Phoenix\Products\RM-356
-neither works...

What am I missing here? Do I need to manually select the files? Is it because my phone isn't hacked?

Thanks

Ronitvohra
22nd October 2010, 16:11
Hey,
A bit of a silly question...
I'm new to this business. Downloaded and installed JAF, while installing it asked me to change the driver for Nokia Cable and I pressed OK.
Found out that I can only run JAF using the JAF emulator. Still gives me an error "BOX DRIVER NOT INSTALLED" but will run the application.

Changed the settings to match these in the instruction here-
[Only registered and activated users can see links]
Connected my phone (5800) using USB. (BTW does it matter if I choose PC Suite or something else?)
The problem is that JAF can't find the CFW files. I've tried saving them in -
C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356
or
C:\Program Files\Common Files\Nokia\Phoenix\Products\RM-356
-neither works...

What am I missing here? Do I need to manually select the files? Is it because my phone isn't hacked?

Thanks


You have done everything correctly i.e. the errors are Ok when installing jaf, its only the file path. I am using 64bit windows, so my path is C:\Program Files (x86)\Nokia\phoenix\products\RM-356.

If you are using 32bit, it should be C:\Program Files\Nokia\phoenix\products\RM-356.

matish
23rd October 2010, 16:29
Thanks, worked like a charm !

kazel07
23rd October 2010, 17:07
hi! i have a 5530xm v11. can i apply this cfw? is this good or bad?

kazel07
25th October 2010, 11:21
is there anyone know how to use the .7z file extension?

snork5
25th October 2010, 11:30
Unpack this with 7-Zip or IZarc.

My question:
can I back to my previous original 51.0.006 soft?
can I do this with nokia Software Updater? After searching for new firmware, there's such option as Reinstall.

anubhav123
25th October 2010, 14:03
is there anyone know how to use the .7z file extension?

Use winrar application in PC to extract the contents of the file.




Unpack this with 7-Zip or IZarc.

My question:
can I back to my previous original 51.0.006 soft?
can I do this with nokia Software Updater? After searching for new firmware, there's such option as Reinstall.

Abt ur 1st que, yes you can go back to original v51.0.006.

For 2nd que, no u cant do that with Nokia Software Updater coz you will brick ur phone after that. Use the same method as u used for installing this version.

snork5
25th October 2010, 14:21
Thanks mate, I didn't know nothing about this reinstalling feature in NSU, so You just saved my phone :)

anubhav123
25th October 2010, 19:34
Thanks mate, I didn't know nothing about this reinstalling feature in NSU, so You just saved my phone :)

No problems mate, NSU works only if ur using original firmware. For a custom fw its risky to some extent.

drrox
13th November 2010, 22:09
please make the new firmware mod for 5530
its with new dialer n more features

---------- Post added at 22:09 ----------
---------- Previous post was at 22:09 ----------

please make the new firmware mod for 5530
its with new dialer n more features

Ronitvohra
14th November 2010, 16:55
@droxx, it has already been ported to 5800 and 5530. I am using it, still has some bugs and will be released once the bugs are solved.

dont post the same everywhere, I found you posted this in another thread.
[Only registered and activated users can see links]

drrox
15th November 2010, 13:23
thnax n sorry for wrong post

drrox
20th November 2010, 18:54
my dialer showing same old dialer of nokia 5530 :(

Ronitvohra
20th November 2010, 20:01
my dialer showing same old dialer of nokia 5530 :(

Oh sorry! I think you misunderstood me. I wrote its already available but it still has bugs. Once, the bugs are resolved I will make one firmware and release it.

The firmware you flashed is v11 of C6 CFW so new dailer as of now :)

BTW: I am about to finish and will post a new firmware for 5800/5530 within 2-3 days :)

anubhav123
26th November 2010, 10:54
does this work on x6 to?

No, this is custom c6 firmware ported to Nokia 5530 & 5800 only.

ngige
26th November 2010, 14:56
hey guys.thanks for all the hard work.this is my 1st attempt at flashing my phone.have a quick question.is it possible to rollback to my original(previous) firmware?

RASTAVIPER
26th November 2010, 15:08
hey guys.thanks for all the hard work.this is my 1st attempt at flashing my phone.have a quick question.is it possible to rollback to my original(previous) firmware?
Only if its in the same number.
For example 51 modded-51 original

ngige
26th November 2010, 15:29
Only if its in the same number.
For example 51 modded-51 original

Thanks for the quick response,but at the risk of sounding too much like a novice to this,let me ask.are you suggesting i can flash my phone with 'original' non-modded firmware?and if so is it available on our beloved forum?

blueeagle69
9th December 2010, 02:03
Hi.

Since flashing my phone for the second time, Zip Manager isn't showing, and zip files won't open. But if I try to install Zip manager afterwards, i get "Component built in".
Do you know what files I need to remove from the rofs2 to get rid of Zip manager, so I can install it normally?
Lastly is there anyway to get the full qwerty keyboard to autorepeat.
If you hold down the backspace, the vibration is repeating but the key isn't :(

Many thanks.

Ronitvohra
9th December 2010, 06:35
Hi.

Since flashing my phone for the second time, Zip Manager isn't showing, and zip files won't open. But if I try to install Zip manager afterwards, i get "Component built in".
Do you know what files I need to remove from the rofs2 to get rid of Zip manager, so I can install it normally?
Lastly is there anyway to get the full qwerty keyboard to autorepeat.
If you hold down the backspace, the vibration is repeating but the key isn't :(

Many thanks.

Zipmanager- install xplore as you need to reflash to remove it. full qwerty not possible with C6 Cfw's. backspace key working fine with me.

Ronitvohra
9th December 2010, 06:36
hey guys.thanks for all the hard work.this is my 1st attempt at flashing my phone.have a quick question.is it possible to rollback to my original(previous) firmware?

yes offcourse, it should be v51. if you are using v52 NOW, you cant flash this firmware anymore.

lzhikai1994
20th December 2010, 07:38
How long does it take to flash? I freaking scared, but I cannot stand the laggy-ness of my Nokia 5800.... I barely can send a sms......

Also, all product codes can do this? Cause my Nokia 5800 is under Singtel and it has adverts whenever I turn off my phone... Very irritating.

---------- Post added at 13:38 ----------
---------- Previous post was at 13:37 ----------

How long does it take to flash? I freaking scared, but I cannot stand the laggy-ness of my Nokia 5800.... I barely can send a sms......

Also, all product codes can do this? Cause my Nokia 5800 is under Singtel and it has adverts whenever I turn off my phone... Very irritating.
:suicide::suicide::suicide::suicide::suicide:

Ronitvohra
20th December 2010, 19:56
How long does it take to flash? I freaking scared, but I cannot stand the laggy-ness of my Nokia 5800.... I barely can send a sms......

Also, all product codes can do this? Cause my Nokia 5800 is under Singtel and it has adverts whenever I turn off my phone... Very irritating.

---------- Post added at 13:38 ----------
---------- Previous post was at 13:37 ----------

How long does it take to flash? I freaking scared, but I cannot stand the laggy-ness of my Nokia 5800.... I barely can send a sms......

Also, all product codes can do this? Cause my Nokia 5800 is under Singtel and it has adverts whenever I turn off my phone... Very irritating.
:suicide::suicide::suicide::suicide::suicide:

your phone should be rm-356, dont care abt the product code, and it takes less than 5 mins to flash.

lzhikai1994
21st December 2010, 13:41
Stupid problem.... No flash button.
















EDIT: Done... Thank you for replying me. I love my 5800 now :D

D_Saint
27th December 2010, 21:28
Hi everyone.

Could you give me some hints, please.
My 5800xm has v21.0.0.25 firm (prod. cod 0576900) and there is only the newest version V50 of the original firm (there is no previous v30, V40...) and he is hacked with hellox.
1- to flash with original v50 i need to remove hack, it can and how it can be done?
2- since there is no V51, is something goes wrong with the flash of this amazing c6 mod firm, i canīt rollback, is that right?

please advice.

Thanks in advance.

D_Saint

muzicfreako
28th December 2010, 07:01
Hi everyone.

Could you give me some hints, please.
1- to flash with original v50 i need to remove hack, it can and how it can be done?
2- since there is no V51, is something goes wrong with the flash of this amazing c6 mod firm, i canīt rollback, is that right?
please advice.
D_Saint
1. Flashing with original firmware removes hellox hack
2. You can roll back anytime to v50 from the C6-5800 firmware...& also u can roll back to C6-5800 from v50. I've done a no. of times. Only u cant roll back to v40 from v50.
So its safe to do wat u want...go ahead.

Nastykid
2nd January 2011, 10:40
Can someone please add new images? The old ones seems to be removed from tinypic.

Thanks in advance. :D

lzhikai1994
3rd January 2011, 17:21
If I would like to revert to my original FW, I just have to download files from Navifirm and flash using JAF? I would have to select the rosf3 file right?

anubhav123
3rd January 2011, 18:36
If I would like to revert to my original FW, I just have to download files from Navifirm and flash using JAF? I would have to select the rosf3 file right?

Ya, u must include rofs3 file this time bro...

lzhikai1994
3rd January 2011, 19:06
Ya, u must include rofs3 file this time bro...

Thanks bro.... This is definitely a great forum with helpful people... :iphonepost::ilove::urtheman:

Ronitvohra
5th January 2011, 00:42
Ya, u must include rofs3 file this time bro...

great job dude, rep for your help :)

Desperion
9th January 2011, 15:54
Hello. I tryed to flash my 5800. In the midle of the proces an error occured. Error writing cmt. Now when i turn of my phon only vibrate. =(
Its my phone lost?

anubhav123
9th January 2011, 18:50
Hello. I tryed to flash my 5800. In the midle of the proces an error occured. Error writing cmt. Now when i turn of my phon only vibrate. =(
Its my phone lost?

Try to flash again with your original firmware files....

dinocat
21st January 2011, 19:41
Hi , i need 3 homescreen / 3 wallpapers in this firmware .... can anyone help me to get this????????

anubhav123
21st January 2011, 20:43
Hi , i need 3 homescreen / 3 wallpapers in this firmware .... can anyone help me to get this????????

Its not possible mate...

ppkakkar
21st January 2011, 23:46
Does this mean that the camera become 5.0 MP sice C6 has a 5MP cam and 5530 only has a 3.2MP camera?
i hope u udstd my question?

ayounus0192
14th February 2011, 14:21
hi, this is my 1st time flashing my phone. for some reason everytime i hit flash it doesn't find my phone. can someone plz help,.. thanks in advance...

anubhav123
14th February 2011, 19:41
hi, this is my 1st time flashing my phone. for some reason everytime i hit flash it doesn't find my phone. can someone plz help,.. thanks in advance...

What exactly is the error shown mate ???

ayounus0192
16th February 2011, 01:09
hi,. i don't get how i can install quickoffice and reader on my phone..

anubhav123
16th February 2011, 12:26
hi,. i don't get how i can install quickoffice and reader on my phone..

By installing them normally..... by usual method only...

Are you not able to do that by clicking the sis package ????

ayounus0192
16th February 2011, 16:00
By installing them normally..... by usual method only...

Are you not able to do that by clicking the sis package ????

nope.. everytime i hit install it says u can't install this cuz its buildin... plz help

anubhav123
16th February 2011, 20:58
nope.. everytime i hit install it says u can't install this cuz its buildin... plz help

The problem is with your firmware mate. You will need to remove the files manually... The files of quickoffice & reader are not removed properly...

ayounus0192
16th February 2011, 22:13
The problem is with your firmware mate. You will need to remove the files manually... The files of quickoffice & reader are not removed properly...

can you plz tell me how do i do that?

anubhav123
16th February 2011, 22:23
can you plz tell me how do i do that?

I dont know about how to remove the files coz I've never done it before but I know another way to solve this problem..

Use siscontent or any other sis file extractor & extract the files of office & reader & add them to your rofs2 & flash the phone again. Office & reader will work properly but you wont be able to upgrade the versions of office & reader again...

About how to remove the files completely, you may refer the problem to Bro Khantastic... He is much more experienced in modding section....

EDIT :

Or you can delete the files by using nokia fw cleaner... Its very esay to delete the files using the app.

You can find it here :

[Only registered and activated users can see links]

Khantastic
17th February 2011, 11:38
yes, one way is to remove the files using fw cleaner....
but am sure after doing this, when you will try to install these apps, you will get "base package missing" :(
plenty of base packages are available, one worked for few, and for rest other one worked and so on, not a perfect package is available..so you must try them all till success....

other solution........
remove using fw cleaner, re flash....instead of installing base package, install v4 of quick office....
and then install latest versions....

but i doubt why these files are in z...
they should not be in z :s

you can see the icons or not? if you can and they are trial then do this..
using xplore and open4 all patch, and first, using sis contents, extract all the folders of quick office and adobe reader, now as i was about to write before, using xplore and open4 all patch, copy all those folders to your c drive...!! replace any file if it asks for...both these apps will be replaced with full versions....

but if you cannot see the apps then you have to remove these apps manually...also in cfws their's a big problem, of pips and api bridge...i think one of these thing also comes with quick office, and pips as i know comes with ovi maps, specially with 3.06..if you are using ovi maps 3.06 built in, remove it too...!!

good_dud
18th February 2011, 13:28
I have v 52.0.007 ,can i upgrade my phone using this method?

Ronitvohra
18th February 2011, 20:21
I dont know about how to remove the files coz I've never done it before but I know another way to solve this problem..

Use siscontent or any other sis file extractor & extract the files of office & reader & add them to your rofs2 & flash the phone again. Office & reader will work properly but you wont be able to upgrade the versions of office & reader again...

About how to remove the files completely, you may refer the problem to Bro Khantastic... He is much more experienced in modding section....

EDIT :

Or you can delete the files by using nokia fw cleaner... Its very esay to delete the files using the app.

You can find it here :

[Only registered and activated users can see links]

@Anubhav What kinda help you needed bro ? you already solved it. :) just adding few points : There are two methods,

1. download quickoffice and adobe pdf reader and unpack the installer using SIScontents. Then you will see all the files on that installer. Then extract your rofs2 using NFE by PNHT. Find all the files on that installer to your extracted rofs then delete it.. And lastly go to system/install delete the file adobereader_stub.sis and quickoffice_stub.sis.... (This method doesn't work, if you forget even 1 file )

If you need those files :
adobereader: [Only registered and activated users can see links]
quickoffice: [Only registered and activated users can see links]


@OP the easy way- Download Nokia firmware editor, download the attachment below, in NFE use this .app and remove those files. ( manually remove "system/install delete the file adobereader_stub.sis and quickoffice_stub.sis")

624312

Ronitvohra
18th February 2011, 20:23
I have v 52.0.007 ,can i upgrade my phone using this method?

NO ! You will brick it. :)

[Only registered and activated users can see links]

ayounus0192
19th February 2011, 20:34
"Now you get it as trial after the simple mod given below, then you can activate with ur
licence key or with keygens.


Download

Extract and copy the data folder to C:\data\system (Replace the Quick office folder with the supplied one and you will see the "ENTER UNLOCK CODE" option in QUICK OFFICE AND ADOBE READER)"

can someone plz upload that quickoffice and reader files... they are not available anymore.. thanks..

yongsky
2nd March 2011, 11:18
can someone please reupload the screenshot.... coz its deleted at image pic...... huhu thanks!

p.s. i cannot launch JAF! it says "pkey dongle not detected" WTF! is this???

jazzzzzzz
12th March 2011, 07:24
any body plzzzzzzzzzzzzzzz reupload the pictures in the forum.....plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz z

petmilos
16th April 2011, 21:08
You can modify it yourself and put in all languages you like easily WITH THIS TUTORIAL ([Only registered and activated users can see links]). Read the notes in Post No. 6 ([Only registered and activated users can see links]).



Maaaaaaaaan thank you very much, that worked! Great!:thanks:
Next issue: I have jbak taskman installed. when its opened the clock and "slide to open key" doesnt work. when i press the menu key i just see the homescreen a little bit darker, and not the clock... when jbak taskman is closed it works fine again...

Can you please tell me what "format phone" means? Formating memory card or what? Thanks

anubhav123
16th April 2011, 21:13
Formatting Phone means completely deletion of phone's internal memory not memory card..

petmilos
16th April 2011, 21:18
But will this maybe make some mess in my phone? Just asking, deletion is not a big problem ;)
Thanks

anubhav123
16th April 2011, 21:31
No, it wont make any mess to your phone. It will just delete the files which you have installed, the system files which are necessary to run the phone will be secured....

petmilos
16th April 2011, 22:02
Thanks for your answer, I deleted phone memory.
But unfortunately it didn't solve my problem. I restored contacts from memory card and favourites bar still doesn't work :( when I add some contact as favourite nothing happens and that contact I can't find anymore in contact list :(
I have two more problems:
1. shortcut Home screen theme on shortcut bar doesn't work, it blocks my phone when I press it...
2. e-mail widget shows only one of mine two e-mail accounts...

yjlim2002
17th April 2011, 15:18
Pls upload the pics in the first page. i cannot see the pics.
thxs

Khantastic
17th April 2011, 17:02
Thanks for your answer, I deleted phone memory.
But unfortunately it didn't solve my problem. I restored contacts from memory card and favourites bar still doesn't work :( when I add some contact as favourite nothing happens and that contact I can't find anymore in contact list :(
I have two more problems:
1. shortcut Home screen theme on shortcut bar doesn't work, it blocks my phone when I press it...
2. e-mail widget shows only one of mine two e-mail accounts...

email app does have bugs in c6 port........
shortcut HS theme??? why you need when you have that widgets HS??

petmilos
17th April 2011, 17:41
email app does have bugs in c6 port........
shortcut HS theme??? why you need when you have that widgets HS??
I don't need homescreen theme shortcut, but I just wanted to inform you that this is probably a bug.
I have one more question. White light on my phone is sometimes on, sometimes off, no rules. Do you know why is that and how can I fix it?
Thanks

Khantastic
17th April 2011, 19:29
I don't need homescreen theme shortcut, but I just wanted to inform you that this is probably a bug.
I have one more question. White light on my phone is sometimes on, sometimes off, no rules. Do you know why is that and how can I fix it?
Thanks

which white light?
(i think there's no charging light in these devices) but.....
that one for charging notifications? yes that too have bugs....just re insert the charger pin when its not on while it's charging....!!

or that one which is on menu key??? it's for sms call and email notifications mate....check its settings in settings :D

Ronitvohra
17th April 2011, 20:08
Pls upload the pics in the first page. i cannot see the pics.
thxs

Done.


I don't need homescreen theme shortcut, but I just wanted to inform you that this is probably a bug.
I have one more question. White light on my phone is sometimes on, sometimes off, no rules. Do you know why is that and how can I fix it?
Thanks

There is a fix to change the rules of while light, search here or google. I am not sure if its posted here coz I no more use symbian now.

nahidarch
17th April 2011, 21:49
oh..
i bought nokia c6 last week..
i would buy 5530. if i knew this thing before...

iam not happy with my c6... poor battery life...

yjlim2002
16th June 2011, 19:29
JAF cannot find the files for flashing. I cre8 DAtapackage then products then RM-356 in the common files folder already. but JAF still cannot detect the files. How?
Pls help

anubhav123
16th June 2011, 20:17
JAF cannot find the files for flashing. I cre8 DAtapackage then products then RM-356 in the common files folder already. but JAF still cannot detect the files. How?
Pls help

Create this directory C:\Program Files\Nokia\Phoenix\Products\RM-356 & place the files in this folder, JAF will surely detect the files....

xpac
17th June 2011, 09:23
Tried several times installing JAF 1.98.62 but always failed.....I'm using Win7 Ultimate
Do you have any alteration for this App which is compatible with my OS?
I want to use C6 CFW ported to 5800. Any Idea ?

Khantastic
17th June 2011, 10:11
Tried several times installing JAF 1.98.62 but always failed.....I'm using Win7 Ultimate
Do you have any alteration for this App which is compatible with my OS?
I want to use C6 CFW ported to 5800. Any Idea ?

i used to run the same in my win 7 ultimate with no problems......may be you are running it from a shortcut...........go to the link flashing guide from my signature and download jaf from there, install it but run it through that pkey file inlcuded in that download package............(make sure you run it in xp sp3 compatibility mod.......).....

also try asking these kinda questions in fw queries thread.........

wasiqnoor
17th August 2011, 17:37
"C:\Program Files\Common Files\Nokia

i have only folder upto this addres... there is no data peckge folder?? what to do:hardcry:

anubhav123
17th August 2011, 19:11
"C:\Program Files\Common Files\Nokia

i have only folder upto this addres... there is no data peckge folder?? what to do:hardcry:

Place all the files in this directory below :

C:\Program Files\Nokia\Phoenix\Products\RM-356

wasiqnoor
18th August 2011, 16:32
i could not install it on my 5530... in JAF it ends at pooling phone and then phone not found?? what to do?? :hardcry:
plxx help

wasiqnoor
19th August 2011, 01:54
i could not install it on my 5530... in JAF it ends at pooling phone and then phone not found?? what to do??
plxx help

wasiqnoor
19th August 2011, 13:24
i could not install it on my 5530... in JAF it ends at pooling phone and then phone not found?? what to do??
plxx help

---------- Above post added at 16:47 ----------
Below post was at 16:54 ----------



C6 Firmware Fully Working on 5530/5800-Release Files-by PNHT
[Only registered and activated users can see links]



Nokia 5800Xpressmusic RM-356
You have to download firmware files from the below mentioned links and then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\"



Nokia 5530 RM-504
You have to download firmware files from the below mentioned links and then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-504\"



C6 for NOKIA 5800 RM-356 ([Only registered and activated users can see links])

C6 for NOKIA 5530 RM-504 ([Only registered and activated users can see links])

Download JAF.1.98.62 ([Only registered and activated users can see links])
& launch JAF v1.98.62.exe ([Only registered and activated users can see links])

Set options like in picture below:

[Only registered and activated users can see links]





Tick "Use INI" then select your phone:

Select Nokia 5800 XM With RM-356 or Nokia 5530 RM-504



[Only registered and activated users can see links]

Nokia 5800XM :
JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\"

Nokia 5530
JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-504\"





Now TURN OFF your phone !! and then click FLASH button after that press power button
(don't hold it) on your phone and JAF will start flashing.

You will get the latest Customer firmware of C6 on your respective phones HACKED.

No need of Rompatcher to hack your firmware, and you will get Homescreen like the Nokia C6/N97.

[Only registered and activated users can see links]

Is your phone model not supported by JAF? Look no further, here I will post and update the latest JAF ini files to support new phone models.

Place it in the JAF installation folder and overwrite the existing file. This post will be updated as necessary.

[Only registered and activated users can see links] you want to add your languages to this firmware, please use the tutorial :
TUTORIAL TO ADD YOUR OWN LANGUAGES ([Only registered and activated users can see links])
Download
Nokia Firmware Editor v0.2 by PNHT ([Only registered and activated users can see links])

Download Languages for your phone:
Download ([Only registered and activated users can see links])

You can download awesome Custom wallpapers created by anubhav123 ([Only registered and activated users can see links]) specially for this firmware :
Download ([Only registered and activated users can see links])

Those who would like a complete transparent theme for out
new cute C6
Download ([Only registered and activated users can see links])

Some FAQ"S :

1. If you're not able to add the favorite contacts to the homescreen, do the trick as mentioned below :

First restore your contacts from ovi/pc suite, then copy those business card to memory card then format your phone. Then restore the contacts as: Go to contacts- copy business card-from other memory-select card memory-ok.
post results. The favorite contacts will work :D

2. Solve no license/ No activate option in Adobe readerLE and Quickoffice [Only registered and activated users can see links]

Now you get it as trial after the simple mod given below, then you can activate with ur
licence key or with keygens.


Download ([Only registered and activated users can see links])

Extract and copy the data folder to C:\data\system (Replace the Quick office folder with the supplied one and you will see the "ENTER UNLOCK CODE" option in QUICK OFFICE AND ADOBE READER)


Below you will find modified file for disable all keys light on your 5800 with C6CFW (I think it should works also on real Nokia C6).
1) Download this file: DOWNLOAD ([Only registered and activated users can see links])
2) Apply Open4All patch in RomPatcher.
3) Copy "private" folder into C:\ drive on your phone, and replace all.
4) Just reboot your phone after all, and enjoy!

Second version!
Download ([Only registered and activated users can see links])
White menu key is lighting always when phone is unlocked.
1st version lighted till you pressed menu key.
Notification light still breathing until you unlock, after that it's stopping.

If you want back to behavior before upgrading to custom firmware, I mean you want disable green key light when charging- follow these steps:
1) Download this file: DOWNLOAD ([Only registered and activated users can see links])
2) Apply in RomPatcher Open4All patch.
3) Copy "private" folder into C:\ drive on your phone, and replace all.
4) Just reboot your phone after all, and enjoy!

Added Conversation as sis package (on request):
Download ([Only registered and activated users can see links])

How to install Quick office and Adobe cracked versions :
I formatted my phone, and flashed with the C6 firmware, Nokia 5800Xm RM-356 with the edited rofs2 that I made.

I tried installing Quickoffice Premier and adobe and they worked fine. I am attaching the .app files that you needed to remove three applications, Adobe, Quick office and Zip manager as both these applications has common files.

Follow these simple steps :

Put the .app file(s) into the apps folder (create it if necessary) in your NFE folder

Open NFE and go to Tools>Application Manager>Manage Applications

Then select the .app file you want, and it will delete all the files it is programed to delete

After you are done. just rebuild/repack your rofs2 by clicking the button.

After this, you can get this rofs2 in same folder where you have firmware files with name RM-356_51.0.006_prd.rofs2_rebuilt.V01, then you have to rename this file to RM-356_51.0.006_prd.rofs2.V01 and flash it.

Now, you can install Quick office and Adobe reader. If you still face any problems, do let me know.





i could not install it on my 5530... in JAF it ends at pooling phone and then phone not found?? what to do??
plxx help:hardcry:

wasiqnoor
10th September 2011, 17:01
i installed this fw on 5530 successfully... bt my menu keys lights are not working.. only red lights up.. menu and green keys does nt light... any solution??

shanujia
1st October 2011, 16:54
Thank you so much.... My Nokia 5530 works like charm.... :dance: ur uploads are great but destination folder instruction was incorrect...

u said

You have to download firmware files from the below mentioned links and then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-504\


but in real we have to
"C:\Program Files\Nokia\Phoenix\Products\RM-504

Do not mind... I am just guiding my friends....

Thank u so much

:urtheman:

wmughal
19th October 2011, 21:24
after installing jaf and when me trying to launch it this error comes up what is this

[Only registered and activated users can see links]

and can we use phonex instead of jaf?

anubhav123
20th October 2011, 10:43
after installing jaf and when me trying to launch it this error comes up what is this

[Only registered and activated users can see links]

and can we use phonex instead of jaf?

Dont run JAF through the desktop shortcut, run it through pkey provided in the archive from where you installed JAF...

If you dont have the pkey, download from here :

[Only registered and activated users can see links]

And yes, you can use phoenix for flashing.. For more info about it, search the forum..

wmughal
20th October 2011, 16:24
^ same error when i access jaf from pkey :(

i can use this method and files provided by thread maker ? is it safe and same as using jaf [Only registered and activated users can see links](using-NaviFirm-Phoenix-RP-)

wmughal
20th October 2011, 16:48
i figure out and run jaf but there is no nokia 5530 listed :(

[Only registered and activated users can see links]

Khantastic
20th October 2011, 17:11
i figure out and run jaf but there is no nokia 5530 listed :(



at the end of this guide, there's a link to modified ini file, download it and place it in jaf folder,

[Only registered and activated users can see links]

wmughal
20th October 2011, 17:34
LAST QUESTION the firmware provided in this thread is version 31 and i have already 32 in my mobile is ot safe to flash with it :)

Khantastic
20th October 2011, 17:43
LAST QUESTION the firmware provided in this thread is version 31 and i have already 32 in my mobile is ot safe to flash with it :)

NOOOO........not safe at all....don't flash lower ver in your 5530........n8 is only known symbian device which supports downgrading

wmughal
20th October 2011, 17:53
thanx bro for ur help :D

wmughal
22nd October 2011, 15:42
pl update the firmware to 32 of 5530 :)

waqas_0097
27th October 2011, 21:54
i try this but there is error that apear when the phone is polling... its says device is not found.

Khantastic
27th October 2011, 22:29
i try this but there is error that apear when the phone is polling... its says device is not found.

pull your battery out, wait for a few minutes, then insert it....start the phone, if it runs, you are good, if it don't, do not panic, just re flash with all the original fw files, using phoenix's dead usb mode

waqas_0097
28th October 2011, 02:26
where to download fw files have link which work 100% original

waqas_0097
28th October 2011, 14:01
anyone help me

my phone is dead... it disconnected while pooling ..

Khantastic
28th October 2011, 14:24
anyone help me

my phone is dead... it disconnected while pooling ..

reflash with phoenix, original files and in dead usb mode

waqas_0097
28th October 2011, 14:39
reflash with phoenix, original files and in dead usb mode

where i can download the original files..

waqas_0097
28th October 2011, 15:15
i got my device back thanks buddy..

Khantastic
28th October 2011, 15:23
i got my device back thanks buddy..

sorry i couldn't reply. was't here.....

glad to know you have it back

hammadjavaid
29th October 2011, 22:17
plz tell me! Is ths only for red and black colour phones or othrs.

Khantastic
30th October 2011, 07:43
plz tell me! Is ths only for red and black colour phones or othrs.

this one's an older fw, try some newer one from here
Index of all the CFW/CFW Related threads in S60 CFW Section {updated 20/10/11} ([Only registered and activated users can see links])

and you can install on any coloured device as long as RM and fw ver are a match

hammadjavaid
31st October 2011, 17:29
Sir! I download my nokia 5530 orignal firmware and anna custem firmware. my orignal firmware show 2 (FPSX) files & anna custem firmware show only 1 (FPSX) file. plz tell me how can i change custem firmware name.
Sir Plz Chk Ths pics..
640660640661

NikitoGR
28th February 2012, 00:01
Links are dead! please upload new links! thank you!

alex_drg1996
10th March 2012, 18:00
another link for the rm-504 version pls? :( that one is not working!

jaber22
20th March 2012, 05:46
Im try to download "C6 Firmware Fully Working on 5530/5800-Release Files-by PNHT"
end than it said "The file You are looking for... may be deleted by the user or by the Administrator !"
Boss can u give another link pls....

isolove
30th April 2012, 15:52
I find a 5800 for 30 euros,good looking.
I want to ask,with this flash what camera i gone have?