View Full Version : Nokia C6 v11.0.029 Firmware on 5530/5800-multiple lang updated on 23/9/2010



Ronitvohra
30th August 2010, 09:42
C6 v11.0.029 Firmware Fully Working on 5530/5800 - Released



[Only registered and activated users can see links]

The first ported C6 v10.0.024 to 5800 and 5530 had some serious RAM management issues and apparently, battery drain. Well, as all of you know, this was Nokia's mistake.:rofl:

However, they seems to have fixed some of these bugs for original C6 owners.

PNHT always wants the best for their fans So we grabbed this update and cooked it for you


Released Files
C6 v11.0.029 for 5530 RM-504 ([Only registered and activated users can see links])
C6 v11.0.029 for 5800 RM-356 ([Only registered and activated users can see links])

Currently, the FW have been ported successfully to 5800 RM-356 and 5530 RM-504 Preliminary tests seems correct for us. RAM management is better while keeping a good performance level. The FW always feel fast and snappy

Notes
Follow the same flashing instructions of the previous ported C6 version
Check the instructions Here ([Only registered and activated users can see links])
Old language packs should work correctly in this build
Languages ([Only registered and activated users can see links])
Enjoy

Change LOG :
Stability

* Browser baseline updated, about 250 corrections
* Widgets are leaking RAM, amount of memory leak decreased a lot
* MPX Harvester stopped scanning when encounters File System corruption or other issues
* Improvement to refreshing library in Music player
* Securewidgetpreinstaller slows phone start
* Boot up improved in production

Email

* Mail for Exchange: calendar sync improved
* E-mail message gets scrambled by Email forwarded or replied email are scrambled and full of foreign (mostly Chinese) characters
* Special characters are not displayed correctly in opened mail

Usability

* Big Clock not shown when device lock activated
* Device lock fixed

If you want to add your languages to this firmware, please use the tutorial :
TUTORIAL TO ADD YOUR OWN LANGUAGES ([Only registered and activated users can see links])
Download
Nokia Firmware Editor v0.2 by PNHT ([Only registered and activated users can see links])

Download Languages for your phone:
Download ([Only registered and activated users can see links])

Those who would like a complete transparent theme for out
new cute C6
Download ([Only registered and activated users can see links])

Some FAQ"S :

1. If you're not able to add the favorite contacts to the homescreen, do the trick as mentioned below :

First restore your contacts from ovi/pc suite, then copy those business card to memory card then format your phone. Then restore the contacts as: Go to contacts- copy business card-from other memory-select card memory-ok.
post results. The favorite contacts will work :D

2. Solve no license/ No activate option in Adobe readerLE and Quickoffice [Only registered and activated users can see links]

Now you get it as trial after the simple mod given below, then you can activate with ur
licence key or with keygens.


Download ([Only registered and activated users can see links])

Extract and copy the data folder to C:\data\system (Replace the Quick office folder with the supplied one and you will see the "ENTER UNLOCK CODE" option in QUICK OFFICE AND ADOBE READER)


Below you will find modified file for disable all keys light on your 5800 with C6CFW (I think it should works also on real Nokia C6).
1) Download this file: DOWNLOAD ([Only registered and activated users can see links])
2) Apply Open4All patch in RomPatcher.
3) Copy "private" folder into C:\ drive on your phone, and replace all.
4) Just reboot your phone after all, and enjoy!

Second version!
Download ([Only registered and activated users can see links])
White menu key is lighting always when phone is unlocked.
1st version lighted till you pressed menu key.
Notification light still breathing until you unlock, after that it's stopping.

If you want back to behavior before upgrading to custom firmware, I mean you want disable green key light when charging- follow these steps:
1) Download this file: DOWNLOAD ([Only registered and activated users can see links])
2) Apply in RomPatcher Open4All patch.
3) Copy "private" folder into C:\ drive on your phone, and replace all.
4) Just reboot your phone after all, and enjoy!

Update - MultiLang fix
* Updated 5800 Files to fix multi language issue.
* Extract and Import the attached Ecom file to your ROFS2 (\private\10009d8f\) and cook it

Added Conversation as sis package (on request):
Download ([Only registered and activated users can see links])

Multiple languages added :

English + French ([Only registered and activated users can see links])

English + German ([Only registered and activated users can see links])

English + Spanish ([Only registered and activated users can see links])

English + Italian ([Only registered and activated users can see links])

English + Portuguese ([Only registered and activated users can see links])

English + Danish ([Only registered and activated users can see links])

English + Dutch ([Only registered and activated users can see links])

English + Polish ([Only registered and activated users can see links])

English + Russian ([Only registered and activated users can see links])

English + Czech ([Only registered and activated users can see links])

English + Finnish ([Only registered and activated users can see links])

English + Galician ([Only registered and activated users can see links])

English + Greek ([Only registered and activated users can see links])

English + Hebrew ([Only registered and activated users can see links])

English + Hungarian ([Only registered and activated users can see links])

English + Icelandic ([Only registered and activated users can see links])

English + Latvian ([Only registered and activated users can see links])

English + Lithuanian ([Only registered and activated users can see links])

English + Norwegian ([Only registered and activated users can see links])

English + Romanian ([Only registered and activated users can see links])

English + Serbian ([Only registered and activated users can see links])

English + Slovak ([Only registered and activated users can see links])

English + Slovenian ([Only registered and activated users can see links])

English + French + Italian + German + Spanish + Portuguese ([Only registered and activated users can see links])

English + Arabic ([Only registered and activated users can see links])

English + Turkish ([Only registered and activated users can see links])

English + Swedish ([Only registered and activated users can see links])

English + Basque ([Only registered and activated users can see links])

English + Bulgarian ([Only registered and activated users can see links])

English + Brazilian Portuguese ([Only registered and activated users can see links])

English + Catalan ([Only registered and activated users can see links])

English + Croatian ([Only registered and activated users can see links])

English + Ukranian ([Only registered and activated users can see links])

English + Estonian ([Only registered and activated users can see links])

These are based on PNHT's C6 Rofs2 so use this ONLY with PNHT's original C6 firmware files. Just replace the Rofs2 with the one you download.
If you don't already have PNHT's C6 FW then download this ([Only registered and activated users can see links])and add the Rofs2 file to the RM-356 folder then flash.

miran0405
31st August 2010, 00:19
I have loaded serbian language in to this fw and flash the phone. Now I can chose serbian language but not serbian writning language. It's not there. Same is with croatian pack. What I have to do?

miran0405
31st August 2010, 01:01
I have loaded serbian language in to this fw and flash the phone. Now I can chose serbian language but not serbian writning language. It's not there. Same is with croatian pack. What I have to do?
I have even extract language paks from original C6 fw and it's the same. I could not find C6 v11 fw. I find only 10.024. Maybe there is the prob. If you could load new language paks from C6 11 fw because I can't find 11 fw with navifw v 0.3. Otherwise this is very very good fw and thanks for it.

Ronitvohra
31st August 2010, 02:16
I have loaded serbian language in to this fw and flash the phone. Now I can chose serbian language but not serbian writning language. It's not there. Same is with croatian pack. What I have to do?

Ok. Here goes the fix for you mate :

Update - MultiLang fix
* Updated 5800 Files to fix multi language issue.
* Extract and Import the attached Ecom file to your ROFS2 (\private\10009d8f\) and cook it

check the first post for the ecom file attached :D


I have even extract language paks from original C6 fw and it's the same. I could not find C6 v11 fw. I find only 10.024. Maybe there is the prob. If you could load new language paks from C6 11 fw because I can't find 11 fw with navifw v 0.3. Otherwise this is very very good fw and thanks for it.

There is no problem now :)

Broad
31st August 2010, 09:33
Nokia C6 v11.0.029 Firmware Fully Working on 5800 - Released - Updated

[Only registered and activated users can see links]

Hi everyone [Only registered and activated users can see links]

The first ported C6 v10.0.024 to 5800 and 5530 had some serious RAM management issues and apparently, battery drain. Well, as all of you know, this was Nokia's mistake [Only registered and activated users can see links]

However, they seems to have fixed some of these bugs for original C6 owners.

PNHT always wants the best for their fans [Only registered and activated users can see links] So we grabbed this update and cooked it for you [Only registered and activated users can see links]

Currently, the FW have been ported successfully to 5800 RM-356 and 5530 RM-504 [Only registered and activated users can see links] Preliminary tests seems correct for us. RAM management is better while keeping a good performance level. The FW always feel fast and snappy [Only registered and activated users can see links]

From the look of it, we think that we will release today [Only registered and activated users can see links]

Released Files
[Only registered and activated users can see links]

miran0405
31st August 2010, 09:41
Ok. Here goes the fix for you mate :

Update - MultiLang fix
* Updated 5800 Files to fix multi language issue.
* Extract and Import the attached Ecom file to your ROFS2 (\private\10009d8f\) and cook it

check the first post for the ecom file attached :D



There is no problem now :)

Everything work perfect now! Thanks very very much!:urtheman::triodance:

kupalogs
31st August 2010, 11:45
Is this hacked and modded? can i install unsigned files?

hasannaqvi
31st August 2010, 12:32
4SHARED MIRROR Download Links

Nokia 5800 - RM-356
C6 v11.0.029 for 5800 RM-356 ([Only registered and activated users can see links])

Nokia 5530 - RM-504
C6 v11.0.029 for 5530 RM-504 ([Only registered and activated users can see links])

Ronitvohra
31st August 2010, 15:03
Everything work perfect now! Thanks very very much!:urtheman::triodance:
no problem.


Is this hacked and modded? can i install unsigned files?

yes its already hacked.

anubhav123
31st August 2010, 21:07
After updating to this version, i wasnt able to send & receive the messages through my phone. Such kind of problem wasnt there with v10.

Any help regarding this ?????

Ronitvohra
31st August 2010, 21:32
After updating to this version, i wasnt able to send & receive the messages through my phone. Such kind of problem wasnt there with v10.

Any help regarding this ?????

Bro, I am not facing any problem with the messages. Can you please check the message center no ? Or try re-flashing again/formatting the phone.

Everything works well here.

kupalogs
1st September 2010, 20:20
I have jaf problem... when i check "use ini" there's no device

and the status:
"Searching for JAF saved location of ini...
Checking path: \

Searching for default location of ini...
Checking path: \Products\\
Searching for JAF saved location of ini...
Checking path: *.vpl\
No ini files found..."

I test all ini files provided here and overwrite ODEON\JAF\jaf_nok4models.ini but still no device.

What could be the problem? pls help Ronitvohra bro

rocporu
2nd September 2010, 07:15
ronitvohera can this cfw work on 5800 version 51.0.006 hacked phone

anubhav123
2nd September 2010, 21:23
ronitvohera can this cfw work on 5800 version 51.0.006 hacked phone

Yes, this works on v51 hacked as i m using it on my hacked phone.

Ronitvohra
3rd September 2010, 10:38
I have jaf problem... when i check "use ini" there's no device

and the status:
"Searching for JAF saved location of ini...
Checking path: \

Searching for default location of ini...
Checking path: \Products\\
Searching for JAF saved location of ini...
Checking path: *.vpl\
No ini files found..."

I test all ini files provided here and overwrite ODEON\JAF\jaf_nok4models.ini but still no device.

What could be the problem? pls help Ronitvohra bro

jaf ini file is located in the JAF folder, not the products folder. On my machine, that would be C:\Program Files (x86)\ODEON\JAF.

What OS are you using. Have u setup the jaf as compatibility program ?


ronitvohera can this cfw work on 5800 version 51.0.006 hacked phone

yes it will work and your phone will be hack. I already replied to your pm.

BTW: its ronitvohra not ronitvohera.

rocporu
4th September 2010, 06:32
wow wowowowowowo g8 work for me ty for ronitvohra it work but cant install that smartmovie crack file it say unable to install and stop

Ronitvohra
4th September 2010, 19:28
wow wowowowowowo g8 work for me ty for ronitvohra it work but cant install that smartmovie crack file it say unable to install and stop

lol...welcome. Try smart movie v4.15. its working well. you can find it here.

Sozinho
4th September 2010, 20:50
lol...welcome. Try smart movie v4.15. its working well. you can find it here.

Hi. Will you release a RM-428 version soon? I found one in other forum but is buggy... Thanks in advance!

Ronitvohra
5th September 2010, 00:30
Hi. Will you release a RM-428 version soon? I found one in other forum but is buggy... Thanks in advance!

Its the old version that you found in other forums that is buggy. have to wait, its in pipeline for RM-428 version.

Sozinho
5th September 2010, 02:10
Its the old version that you found in other forums that is buggy. have to wait, its in pipeline for RM-428 version.
I an using PNHTs v10, and works fine. But another person made a RM-428 version with v11 firmware, based in the old one. Some says is buggy, some says not.
I prefer to wait for your version, because is stable.

Best regards...

kupalogs
6th September 2010, 13:08
Ok now bro, ini file is working, i change the jaf installer...

one more thing, those apps for 5800 are compatible to this firmware? or for C6 apps only?

Ronitvohra
6th September 2010, 13:54
Ok now bro, ini file is working, i change the jaf installer...

one more thing, those apps for 5800 are compatible to this firmware? or for C6 apps only?

5800 apps are compatible to this firmware. Both 5800xm and C6 are same symbian OS.

stelioz78
6th September 2010, 20:04
i have a strange problem.after i installed the new firmware i had swipe by tapping the middle button. but now i cant find it.i tap middle button and only the light is on.any ideas?

Ronitvohra
7th September 2010, 02:43
i have a strange problem.after i installed the new firmware i had swipe by tapping the middle button. but now i cant find it.i tap middle button and only the light is on.any ideas?-
have you installed any task manager ? If yes, remove it and try again , the swipe lock will be back. For task manager, use ramblow. If you've not installed task manager- let me know-
Posted via Mobile Device

penang39
7th September 2010, 11:52
i try install usb..show up P-KEY dongle not detected. please insert activated dongle..wht shld i do to tranfer the 356,,,c6 firware to my nokia 5800xm unhack phone pls help,,guy

rocporu
14th September 2010, 14:56
brother ronit i used all smart movie version but cant work and also that x-plore also not work ever time when install that time it show but when i restart my mobile it show hidden any solution or help me when i install both sofware it work when its trail version but when i install crack version its unable to install same problum in both software and one more problum i cant see private folder its also hidden

anubhav123
14th September 2010, 16:07
brother ronit i used all smart movie version but cant work and also that x-plore also not work ever time when install that time it show but when i restart my mobile it show hidden any solution or help me when i install both sofware it work when its trail version but when i install crack version its unable to install same problum in both software and one more problum i cant see private folder its also hidden

Mate as i told u earlier, u shud try to installing those apps in phone memory. I had the same issue with xplore & i installed it on phone memory & got it to work. Its working fine on my 5800 & no disappearing problem after restart of device. This problem is bcoz u ve not deleted ur private folder while flashing.

Abt ur Hidden Private folder first apply open4all patch in rompatcher & then tick show system files & folders in xplore's config menu.


Hope this is helpful for u.

Ronitvohra
14th September 2010, 17:42
i try install usb..show up P-KEY dongle not detected. please insert activated dongle..wht shld i do to tranfer the 356,,,c6 firware to my nokia 5800xm unhack phone pls help,,guy

Can you post the screenshot of the error here ?


brother ronit i used all smart movie version but cant work and also that x-plore also not work ever time when install that time it show but when i restart my mobile it show hidden any solution or help me when i install both sofware it work when its trail version but when i install crack version its unable to install same problum in both software and one more problum i cant see private folder its also hidden

I think you haven't formatted your memory card, or deleted the pvt folders as mentioned by Anubhav. I suggest you to format your memory card, soft reset your phone and flash the firmware again. Everything gonna work mate.:ashamed:

BTW: I am using xplore and smart movie installed in memory card and everything works fine. You want me to upload those versions here ?

rocporu
14th September 2010, 19:49
now its working thanks anubhav but that hiidden private folder cant slove i do samething what u say i tick on that system folder but still cant see were i got that patch that open4all that one if i allready used hacked verion

Ronitvohra
15th September 2010, 10:02
now its working thanks anubhav but that hiidden private folder cant slove i do samething what u say i tick on that system folder but still cant see were i got that patch that open4all that one if i allready used hacked verion

Try this patch, copy this patch to e:\patches and open rompatcher. Start the patch and then try seeing the hidden folders through file manager or xplore.

rocporu
15th September 2010, 15:20
bro, ronit i i cant see any patch folder in e; were i got that folder

Khantastic
15th September 2010, 16:37
bro, ronit i i cant see any patch folder in e; were i got that folder
then create the folder yourself..

anubhav123
15th September 2010, 18:47
bro, ronit i i cant see any patch folder in e; were i got that folder

Have u installed rompatcher in ur phone ????? The folder Patches gets automatically created after installing rompatcher. If u have installed rompatcher & still didnt get the folder then u must create a folder named Patches in ur mmc & place the attached patch in the respective folder, as said by brother Khantastic.

rocporu
15th September 2010, 20:11
wow wow wow u both r great guy i done it i format my memory card than i flashing again my phone and after flashing i do softreset all evertyhing work perfectly all errror remove thanks to my both brother anubhav and ronit ty alot masters

Ronitvohra
15th September 2010, 22:24
great to know that everything work well :) enjoy your phone now.

lethal
16th September 2010, 23:28
Hi guys, my mails are not working. They don't get connected to emails.
Also when I am using ovi store, it says, can't connect. Although I connect to internet and and able to browse the websites. But its happening in this firmware.
The mails are always a problem now !

Ronitvohra
17th September 2010, 10:38
Hi guys, my mails are not working. They don't get connected to emails.
Also when I am using ovi store, it says, can't connect. Although I connect to internet and and able to browse the websites. But its happening in this firmware.
The mails are always a problem now !


Ovi store- unable to connect is a problem with ovi or with your network settings. Sometimes, I am also not able to connect to the mailbox, but somewhere I read that if you setup two inbox's (gmail, hotmail etc) the email work great. Not sure, if this is some bug or what but now its working fine.

rocporu
17th September 2010, 14:58
Ovi store- unable to connect is a problem with ovi or with your network settings. Sometimes, I am also not able to connect to the mailbox, but somewhere I read that if you setup two inbox's (gmail, hotmail etc) the email work great. Not sure, if this is some bug or what but now its working fine. i agree with ur answer ronit i also read some were that soultion

bulbuc
20th September 2010, 13:09
i tried C6 cfw v.10 but i switched back to original 5530's fw. the battery was draining very fast but the most annoying thing was that the dialler was autorotating, even during a call. are these still present in v11? or do u have a solution to disable the dialler landscape?

rilley
20th September 2010, 14:32
Hello

I need a quick answer,

On 5800 v50 in settings, theme, i had a button called "homescreen" or some like that

In this version of fw where is it? Or i can not change that?

Ronitvohra
20th September 2010, 16:38
i tried C6 cfw v.10 but i switched back to original 5530's fw. the battery was draining very fast but the most annoying thing was that the dialler was autorotating, even during a call. are these still present in v11? or do u have a solution to disable the dialler landscape?


The battery has been improved. Basically, it depends on how you use it. As C6 CFW has widgets on homescreen, if you install those widgets that needs regular Internet connection the battery gonna die soon.

My battery goes out within 1 day+2-4 hours though I am a heavy user with widgets like weather, check-in, facebook, chat always connected.

2. You can disable the autorotate screen by settings, but there is no such option to disable the dailer landscape until you install some other CFW which include such mods.

If you can cook your own firmware, I can provide you the mod by which the dailer landscape wont rotate as you want.


Hello

I need a quick answer,

On 5800 v50 in settings, theme, i had a button called "homescreen" or some like that

In this version of fw where is it? Or i can not change that?

Here is your Quick answer- There is no homescreen settings in C6 CFW as it has only one homescreen which is much better than the original HS's of 5800 :D

rilley
20th September 2010, 19:44
So i found bugs...

If i press the middle button, the menu, if is locked, doesn`t apear that thing with the clock.. SO?

Ronitvohra
21st September 2010, 05:01
So i found bugs...

If i press the middle button, the menu, if is locked, doesn`t apear that thing with the clock.. SO?

Have you installed any task manager? try removing it and test again.:goodluck:

rilley
21st September 2010, 08:46
I installed handy taskmanager 2 for touch....

edit:

I uninstalled the handy task, but why doesn`t work? Is because the handy task is outdated?

Can i use another handy, and the phone to work? If not i will downgr on v50....

Ronitvohra
21st September 2010, 08:53
I installed handy taskmanager 2 for touch....

edit:

I uninstalled the handy task, but why doesn`t work? Is because the handy task is outdated?

Can i use another handy, and the phone to work? If not i will downgr on v50....

You can use Best Taskman.

rilley
21st September 2010, 09:02
I only like handy.... in that case i will downgrade to fw v50....

Anyway the screensaver, is a little stupid, i can not see the status of the battery only the clock and the date.....

Ronitvohra
21st September 2010, 10:06
I only like handy.... in that case i will downgrade to fw v50....

Anyway the screensaver, is a little stupid, i can not see the status of the battery only the clock and the date.....

No problem mate, but remember you cant downgrade to v50, it should be v51. :goodluck:

rilley
21st September 2010, 10:08
With jaf i can :D

CHANDARAKK
21st September 2010, 10:43
With jaf i can :D

sure with jaf box u can but i think dont play with downgrate

Ronitvohra
21st September 2010, 10:52
With jaf i can :D

[Only registered and activated users can see links]

rilley
21st September 2010, 18:11
So i can not uninstall swipe to unlock? so i can use handy taskman, or make a patch? if the screen is locked the menu key to be released from handy taskman and viceversa?

Ronitvohra
22nd September 2010, 03:18
So i can not uninstall swipe to unlock? so i can use handy taskman, or make a patch? if the screen is locked the menu key to be released from handy taskman and viceversa?

If you don't want to use swipe to unlock, install handy taskman. The swipe unlock wont work with the handy taskman and you can pretend it's not installed :D

There are compatibility issues with handy as the menu key is needed for slide unlock which is set by handy taskman for the app as you wrote.

rilley
22nd September 2010, 11:21
Yes but if i let handy task installed, and swipe to unlock active, the problem is, if i pres the white key and if is locked, i can not see at least the clock, or the desk, on the fw v50 i was able to see it,

BUT i succed to disable swipe, i installed app killme and disable from there, and is work like a charm, but now i want to use a custom slide like mylockkey, but if i let handy task installed the menu key is overtaken and there is problems,
Maybe if i try to write a app that if is locked, to work mylockkey, and if is unlocked to work handy taskman, and so on the menu...

Or is another way?

Ronitvohra
23rd September 2010, 07:14
Yes but if i let handy task installed, and swipe to unlock active, the problem is, if i pres the white key and if is locked, i can not see at least the clock, or the desk, on the fw v50 i was able to see it,

BUT i succed to disable swipe, i installed app killme and disable from there, and is work like a charm, but now i want to use a custom slide like mylockkey, but if i let handy task installed the menu key is overtaken and there is problems,
Maybe if i try to write a app that if is locked, to work mylockkey, and if is unlocked to work handy taskman, and so on the menu...

Or is another way?

No.

You using this version v11 or the previous version posted here ?

because in this updated version, some bugs were fixed :
Usability
* Big Clock not shown when device lock activated
* Device lock fixed

rilley
23rd September 2010, 10:52
this version v11 but the problem appears when i install handy taskman.... or mykeylock...

drrox
24th September 2010, 12:17
how to crack quicoffice adobe and office in this firmware ????? :(

anubhav123
24th September 2010, 13:40
how to crack quicoffice adobe and office in this firmware ????? :(

Find some cracked quickoffice & adobe reader from the forum, extract them by using siscontents or any other sis file extractor, place the extracted folders into rofs2, repack & flash it. Ur done with cracking the apps.

or

You can just install those cracked files to ur phone directly.


Hope this is useful to u.

drrox
27th September 2010, 03:19
Find some cracked quickoffice & adobe reader from the forum, extract them by using siscontents or any other sis file extractor, place the extracted folders into rofs2, repack & flash it. Ur done with cracking the apps.

or

You can just install those cracked files to ur phone directly.


Hope this is useful to u.



Thankyou i am trying

Rep added

drrox
27th September 2010, 08:39
what is rofs2 ? its not working by copying directly ....
n how to repack n flash???????

drrox
28th September 2010, 04:13
can i upgrade to .29 firmware?????? have already the .24 version of c6 on 5530

anubhav123
28th September 2010, 18:24
can i upgrade to .29 firmware?????? have already the .24 version of c6 on 5530

Surely u can, but u cant revert back to v24 again.

drrox
28th September 2010, 20:48
thanx i managed to repack by removing quickoffice and now i have installed new firmware n both office + adobe :)

zok511
29th September 2010, 00:58
whether it is possible the process of adding language in FW applied to the Nokia C6

Ronitvohra
29th September 2010, 07:48
whether it is possible the process of adding language in FW applied to the Nokia C6

Yes you can. Check the language tutorial.

drrox
3rd October 2010, 15:48
version .29 wifi working very slow :(
version .24 wifi was fast

Any solution?

5530

itsmechg
3rd October 2010, 17:50
i need kannada language pack....

nokiaonly
7th October 2010, 15:14
Any love for RM-428 users? :ashamed: I'm still using v.10 C6 firmware. I don't thing there is a v.11 version

Ronitvohra
7th October 2010, 21:38
Any love for RM-428 users? :ashamed: I'm still using v.10 C6 firmware. I don't thing there is a v.11 version

I think you requested this earlier too. I can cook the RM-428 version, but need few beta testers for this. Let me see how many beta testers are ready for this and I will cook it.

rajarani87
8th October 2010, 23:19
i have a question if i install this new cfw c6 on my unhacked v50 5800xm, n if i found any problem can i reinstall my original firmware by removing CFW c6?????

anubhav123
8th October 2010, 23:36
i have a question if i install this new cfw c6 on my unhacked v50 5800xm, n if i found any problem can i reinstall my original firmware by removing CFW c6?????

Surely you can go back to your original firmware, just follow the same procedure. & one more thing, if u wanna go back to your original fw, flash your phone with v51 or higher.

Ronitvohra
8th October 2010, 23:37
i have a question if i install this new cfw c6 on my unhacked v50 5800xm, n if i found any problem can i reinstall my original firmware by removing CFW c6?????

C6 CFW is based on V51, in case you don't like the C6 CFW for Nokia 5800XM, you can easily revert back to Original V51 but not V50.

Also, you can directly flash your phone to C6 CFW without flashing your phone to V51 first.


Surely you can go back to your original firmware, just follow the same procedure. & one more thing, if u wanna go back to your original fw, flash your phone with v51 or higher.

Very fast reply anubhav123, I was writing and within 1min you already posted. :)

nokiaonly
9th October 2010, 02:52
I think you requested this earlier too. I can cook the RM-428 version, but need few beta testers for this. Let me see how many beta testers are ready for this and I will cook it.


Alrighty then. I believe you had some beta tester hiccups with the v.10 RM-428 build, correct?

rajarani87
9th October 2010, 23:08
C6 CFW is based on V51, in case you don't like the C6 CFW for Nokia 5800XM, you can easily revert back to Original V51 but not V50.

Also, you can directly flash your phone to C6 CFW without flashing your phone to V51 first.



Very fast reply anubhav123, I was writing and within 1min you already posted. :)
hi, thanks for replyn frnds, but i am not understanding this "flash your phone with v51 or higher.",if i have my FW copy in my PC cant i directly insatll?:confused:

zok511
13th October 2010, 23:29
Yes you can. Check the language tutorial.
according to the method at the beginning of topic I added a new language (Croatian), but after flashing nothing has changed, therefore, a mistake somewhere, whether it be from the new FW to delete something that you may need to be mobile hackirani, I mention that I was flashing with other codom successful product, but if I tried to cook a new FW with NFE, flashing failed, do not forget, I'm fleshing the phoenix, nokia C6 not supported by JAF

Ronitvohra
14th October 2010, 15:19
hi, thanks for replyn frnds, but i am not understanding this "flash your phone with v51 or higher.",if i have my FW copy in my PC cant i directly insatll?:confused:

As you mentioned, you are using v50, if you flash with this c6cfw, you cant revert to v50, it should be the latest v51 for 5800 or higher if ever available for your phone.

hiz
18th October 2010, 22:43
I need the rofs2 file please...on the first post it says

"If you don't already have PNHT's C6 FW then download this and add the Rofs2 file to the RM-356 folder then flash." but when i click on it, it jus brings me back to this thread? Can someone please give me the link for the rofs2 file, thanks

anubhav123
18th October 2010, 22:59
I need the rofs2 file please...on the first post it says

"If you don't already have PNHT's C6 FW then download this and add the Rofs2 file to the RM-356 folder then flash." but when i click on it, it jus brings me back to this thread? Can someone please give me the link for the rofs2 file, thanks

All the links r working fine, i just tested the links......

hiz
18th October 2010, 23:11
All the links r working fine, i just tested the links......

Sorry i meant rofs3...im following a tutorial and stuck on:

Now click on CNT button and browse it to RM-356_40.0.005_C01_prd.rofs3.fpsx file. The file name may be different but it should have .rofs3 in it.

Error I get;

FILES SET FOR FLASHING:
MCU Flash file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM-356_51.0.006_prd.core.C0r
PPM Flash file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM-356_51.0.006_prd.rofs2.V01
CNT Flash file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM356_0558982_51.0.006_001.dcp
APE Variant file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM-356_51.0.006_026_000_U01.uda.fpsx
Languages in ppm: English,French,German,Italian,Spanish,Portuguese
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Flash files are corupted or missing...

anubhav123
19th October 2010, 00:07
Sorry i meant rofs3...im following a tutorial and stuck on:

Now click on CNT button and browse it to RM-356_40.0.005_C01_prd.rofs3.fpsx file. The file name may be different but it should have .rofs3 in it.

Error I get;

FILES SET FOR FLASHING:
MCU Flash file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM-356_51.0.006_prd.core.C0r
PPM Flash file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM-356_51.0.006_prd.rofs2.V01
CNT Flash file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM356_0558982_51.0.006_001.dcp
APE Variant file: C:\Users\Hiren\Desktop\C6_11.0.029_5800_RM-356(symbianzone.co.cc)\RM-356\RM-356_51.0.006_026_000_U01.uda.fpsx
Languages in ppm: English,French,German,Italian,Spanish,Portuguese
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Flash files are corupted or missing...

For c6 fw ported to 5800, u dont need to have rofs3 file. U just need 3 files for flashing i.e. coo file, rofs2 file & uda file. Other files not needed for this fw.

The error ur getting coz u ve selected .dcp file in place of rofs3 file. Try leaving that place vacant & flash ur phone.

hiz
19th October 2010, 03:01
For c6 fw ported to 5800, u dont need to have rofs3 file. U just need 3 files for flashing i.e. coo file, rofs2 file & uda file. Other files not needed for this fw.

The error ur getting coz u ve selected .dcp file in place of rofs3 file. Try leaving that place vacant & flash ur phone.


Thanks mate that worked!

"1. If you're not able to add the favorite contacts to the homescreen, do the trick as mentioned below :

First restore your contacts from ovi/pc suite, then copy those business card to memory card then format your phone. Then restore the contacts as: Go to contacts- copy business card-from other memory-select card memory-ok.
post results. The favorite contacts will work "

How do I format my phone? Isit jus reset to factory settings?

anubhav123
19th October 2010, 20:54
Thanks mate that worked!

"1. If you're not able to add the favorite contacts to the homescreen, do the trick as mentioned below :

First restore your contacts from ovi/pc suite, then copy those business card to memory card then format your phone. Then restore the contacts as: Go to contacts- copy business card-from other memory-select card memory-ok.
post results. The favorite contacts will work "

How do I format my phone? Isit jus reset to factory settings?

Use *#7370# to format the phone.

hiz
20th October 2010, 16:26
Thanks mate.

Can anybody help me mod it, so when i turn the phone sidewards, the qwerty keyboard shows up, and when its standing up, I get alphanumeric?

anubhav123
20th October 2010, 18:41
Thanks mate.

Can anybody help me mod it, so when i turn the phone sidewards, the qwerty keyboard shows up, and when its standing up, I get alphanumeric?

Mate, nobody can mod it as it is an in-built feature of 5800 since arrival of firmware v50 for that.

hiz
21st October 2010, 23:04
Mate, nobody can mod it as it is an in-built feature of 5800 since arrival of firmware v50 for that.

Yeah I knw, but every since I flashed it to this C6 firmware, its got rid of it...So was wondering if i could get it back? As i Liked it like that!

anubhav123
22nd October 2010, 22:40
Yeah I knw, but every since I flashed it to this C6 firmware, its got rid of it...So was wondering if i could get it back? As i Liked it like that!

I liked that bro & i m missing that feature too. But i dont know abt how to do that. You better ask any modder to make it happen.

snork5
27th October 2010, 00:37
So, I want back to my original 51.0.006, but there's no my ProductCode in navifirm(v0.4): 0578174: 5800 RM-356 Country Variant France FR CV V3 RED Free Navi.
I want European(Poland) firmware: 0559298 EURO3 Red.
Can I download firmware for this ProductCode above and flash my phone or should I change my phone ProductCode first and then flash it with this firmware???

EDIT
Ok, I already found my answer, so this post can be delete.. or not, your choice mr.moderator.

stammix
25th November 2010, 15:32
please tell me work to change language for RM-504 or just RM-356?

Ronitvohra
25th November 2010, 19:04
please tell me work to change language for RM-504 or just RM-356?

Nokia 5800 RM-356 ONLY.

stammix
25th November 2010, 20:08
Thank you for your response but I made it. I changed language in romanian for for my Nokia 5530 with C6 FW.

---------- Post added at 19:08 ----------
---------- Previous post was at 19:03 ----------

Again, need help with change data folder in C:\data\system. Anyone could help me?

Ronitvohra
25th November 2010, 20:34
Thank you for your response but I made it. I changed language in romanian for for my Nokia 5530 with C6 FW.

---------- Post added at 19:08 ----------
---------- Previous post was at 19:03 ----------

Again, need help with change data folder in C:\data\system. Anyone could help me?

lol, i thought you were asking about 5800 :) this firmware is compatible with C6 v11.0.029 for 5530 RM-504 ([Only registered and activated users can see links])
C6 v11.0.029 for 5800 RM-356 ([Only registered and activated users can see links])

tomgarner
27th November 2010, 00:01
Do I only need to add the ROFS2 file to the firmware?

darveshbajwa
5th March 2011, 15:15
im using nokia 5530.i have searched many posts but didnt find complete files to flash my phone ...i mean all the files are available except "rofs3"
im using jaf ..can any one pls guide me which file to load instead of rofs3...
and i tried the other method too (i mean to "check ini"...) nd a windows opens containing different phone models and their respective RM.
there is no RM 504 5530 there...
plz help me in both problems...

wasiqnoor
10th September 2011, 19:55
light keys control is deleted file.. can any1 upload it with procedure..??