Nic
24th May 2004, 22:40
Fighter 2.70 is going to expire in the following days.
Shambler 3.00 is ready to be uploaded into the support area.
Version 3.00 (24th May 2004):
Added automatic boot type detection for 5B080201-based phones (T61x/T63x/Z60x/T226/T23x/P90x).
Added support for booting 5B080201-based phones with activated RSA protection feature (nothing more yet).
Added automatic patching of AVR flash files to disable activating RSA protection feature.
Updated PDA flashing applet for P80x/P90x. P90x customization data flashing is stable - no need to lower baudrate to 115kBd anymore.
Modified script for flashing P80x/P90x Bluetooth part.
Security zone 1 creation is a bit faster now.
Fix (critical): Automatic security zone backup could not be restored sometimes due to missing end-of-stream marker.
Fix: "Restore security" button should not be affected by "Protect Security Zone" option in another page.
Enhanced cable control.
Booting algorithm completely redesigned.
Removed bootstrap analysis option as it is no more necessary.
Fix: "Set acoustic compensation to default" option was shown twice for T610®/T618 and not shown for T616.
Fix: "Enable/disable packet channels" function was not working for some models.
Fix: Default bandlock setting for T62u has been corrected - it was previously set to EGSM900 by a mistake.
Function "Reset total call time" enabled for all supported GDFS-based models.
Added "Reset air time" option for all supported GDFS-based models. Only few of them also display this value (T226, T23x,...).
Added "Reset flip counter" option for Z60x.
Added "Reset joystick counter" option for T226/T23x/Z60x.
Added "Reset internet accounts" option for Z60x.
Added option to reset hidden life timer for all GDFS-based models.
Finally added option to fix HBH-30 echo problems on T68.
Added option to enable/disable debug tools on T62u.
Added option to enable/disable permanent CLIR on T62u.
Added support for backup of battery calibration zone of T237/P90x.
Added support for backup of display calibration zone of T237.
Added support for backup of audio calibration zone of T68.
Added support for backup of audio calibration zone of T30x/T31x.
Added support for backup of audio calibration zone of T226/T23x.
Added support for backup of audio calibration zone of P80x/P90x.
Added support for backup of audio calibration zone of T61x/T63x/Z60x.
Added support for backup of radio calibration zone of R520/T39/T65.
Added support for backup of radio calibration zone of T68.
Added support for backup of radio calibration zone of T30x/T31x.
Added support for backup of radio calibration zone of T226/T23x.
Added support for backup of radio calibration zone of P80x/P90x.
Added support for backup of radio calibration zone of T61x/T63x/Z60x.
Added progress indication while reading GDFS zones.
Added "Beep on booting" option for 5B080201-based phones in the Settings Window.
Updated TAC-list for T230.
Fix: Control window, about box and help file now reflect Fighter configuration more accurately.
Help file update: It was necessary to add active scripting due to the previous item.
Help file update: More detailed description of P80x/P90x flashing operation.
Further cosmetic changes.
//Niclas
Shambler 3.00 is ready to be uploaded into the support area.
Version 3.00 (24th May 2004):
Added automatic boot type detection for 5B080201-based phones (T61x/T63x/Z60x/T226/T23x/P90x).
Added support for booting 5B080201-based phones with activated RSA protection feature (nothing more yet).
Added automatic patching of AVR flash files to disable activating RSA protection feature.
Updated PDA flashing applet for P80x/P90x. P90x customization data flashing is stable - no need to lower baudrate to 115kBd anymore.
Modified script for flashing P80x/P90x Bluetooth part.
Security zone 1 creation is a bit faster now.
Fix (critical): Automatic security zone backup could not be restored sometimes due to missing end-of-stream marker.
Fix: "Restore security" button should not be affected by "Protect Security Zone" option in another page.
Enhanced cable control.
Booting algorithm completely redesigned.
Removed bootstrap analysis option as it is no more necessary.
Fix: "Set acoustic compensation to default" option was shown twice for T610®/T618 and not shown for T616.
Fix: "Enable/disable packet channels" function was not working for some models.
Fix: Default bandlock setting for T62u has been corrected - it was previously set to EGSM900 by a mistake.
Function "Reset total call time" enabled for all supported GDFS-based models.
Added "Reset air time" option for all supported GDFS-based models. Only few of them also display this value (T226, T23x,...).
Added "Reset flip counter" option for Z60x.
Added "Reset joystick counter" option for T226/T23x/Z60x.
Added "Reset internet accounts" option for Z60x.
Added option to reset hidden life timer for all GDFS-based models.
Finally added option to fix HBH-30 echo problems on T68.
Added option to enable/disable debug tools on T62u.
Added option to enable/disable permanent CLIR on T62u.
Added support for backup of battery calibration zone of T237/P90x.
Added support for backup of display calibration zone of T237.
Added support for backup of audio calibration zone of T68.
Added support for backup of audio calibration zone of T30x/T31x.
Added support for backup of audio calibration zone of T226/T23x.
Added support for backup of audio calibration zone of P80x/P90x.
Added support for backup of audio calibration zone of T61x/T63x/Z60x.
Added support for backup of radio calibration zone of R520/T39/T65.
Added support for backup of radio calibration zone of T68.
Added support for backup of radio calibration zone of T30x/T31x.
Added support for backup of radio calibration zone of T226/T23x.
Added support for backup of radio calibration zone of P80x/P90x.
Added support for backup of radio calibration zone of T61x/T63x/Z60x.
Added progress indication while reading GDFS zones.
Added "Beep on booting" option for 5B080201-based phones in the Settings Window.
Updated TAC-list for T230.
Fix: Control window, about box and help file now reflect Fighter configuration more accurately.
Help file update: It was necessary to add active scripting due to the previous item.
Help file update: More detailed description of P80x/P90x flashing operation.
Further cosmetic changes.
//Niclas