mody
27th May 2004, 02:20
i have 5510 does insert then closes i heard that tornado does it but how any one help me
|
View Full Version : 5510 insert then turn off mody 27th May 2004, 02:20 i have 5510 does insert then closes i heard that tornado does it but how any one help me ttleng 27th May 2004, 04:15 i have 5510 does insert then closes i heard that tornado does it but how any one help me Of course lar...after you insert sim card, network will be detected, load of power is increase rapidly. Do you think the power from usb enough to support the phone? You need to remove the sim card. mody 27th May 2004, 17:07 no without any sim and with the battry also it turns off after a few seconds ttleng 27th May 2004, 22:24 no without any sim and with the battry also it turns off after a few seconds you mean if you never connect the phone to the flasher and only with battery....then it turn off? qwerthj 28th May 2004, 02:56 Hi! If your phone power off after a few seconds, your phone's ADSP have error. You need reflash ADSP. Use this: http://www.gsmschwantz.com/zip/5510.zip PW: gsmztnawhcs You need make cable from RS232 Fbus cable, need change rx-tx pins. Good Luck! Regards mody 28th May 2004, 06:59 yes but i think its done by tornado treid flashing full flash nothing now i have 4 mobiles any help qwerthj 28th May 2004, 07:24 You can't repair this with tornado, because tornado can't flash ADSP, only MCU+PPM+eeprom. Your phone have error in ADSP panel (radio, mp3 player...) higherzman2k 30th May 2004, 17:49 you need to flash dsp you must use the 5510 m2bus cable not the lpt tested and work 1000000% Br qwerthj 30th May 2004, 18:11 Who sad LPT??? For ADSP flashing need FBUS cable (not m2bus!!) with permuted rx-tx pins! duron850ph 1st June 2004, 16:13 you'll need the EXT_UI Flasher for 5510 and the modified 3310 cable. sahaja 7th July 2004, 01:15 use only fbus serial cable |