Hello

for all users if want no want have problem with your box, read carrefuly :

- NEVER let connected your REDBOX to computer if you not use it
- NEVER REBOOT your computer with REDBOX connected
- TRY to not Switch REDBOX in different computer

How to use :

- Place in same directory SwS software and your SN.key
- Connect REDBOX to LPT
- Plug USB cable in redbox
- Run Software

IF you get problem :

1p - BAD KEY FILE
1s - Solution is to unplug USB , plug it again inside redbox, and run again software, IF you still have BAD KEY file , then Read SN using SNreader, and send to julvir@swgsm.net your original SN + the new SN, if this one is same, juste verify if you have last version of SwS software


2p - If when you read your SN, you have :

2p2 - 000000000000 then Your BOX is damaged , i can not repair it remotly, this hapen if you let redbox connected when Win98 switch in stanby
2s2 - you need exchange your box , see with your resseler what to do

2p3 - FFFFFFFFFFFF then try to run Philips software, if after this you read in philips soft : contact your resseler , Box is damaged
2s3 - Contact your resseler , is maybe only the PIC inside box , then no need to send back the box, if is the Atmega then you need send back

2p4 - E2E2E2E2E2E2 then is no communication with box
2s4 - Check your LPT settings, and try in other PC, you can try to unplug / plug USB power too

2p5 - YOUR ID CHANGE , Power from computer is not stabil for redbox , you switch in some computer
2s5 - I can repair remotly, but better for you to use properly the box in condition i give

2p6 - you use properly, but you get problem, surely power problem
2S6 - look in memeber area, i have upload one shematique for power stability, test it


PLEASE TRY USE REDBOX in respect with this ,

THX

redbox really rules right now ;)

www.gsm-device.com