PDA

View Full Version : 6600 phone start-up failed solution


UFS-3ā
18th February 2005, 04:56
my 6600 show phone start-up failed.
i use ufs-3 cant format user area. :x
after flashing c1+ppm and c4 not done. :?
try *,3,send to format not work :cry:
then i flash with 6600_fullerase.fia

but


1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
Fl3: 0x06000000-0x067FFFFF,0001267E,Amd 29BDS643HT
Algorithm: w3_amd_b.fia
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:18
Erasing: 0x02000000-0x027FFFFF ...
Erasing Error: 10, at: 0x02700000-0x0271FFFF, 940203, Time: 01:04
Process Failed, Repowering Mobile



i've try many times... :evil: any other solution :?: :?: :idea:
winp
18th February 2005, 19:27
mayb ur flash ic is spoil...
UFS-3ā
19th February 2005, 05:18
but flashing ok, can on...

only cant format.... :(
blue_life
20th February 2005, 13:34
try manual erase flash between this add
0x02700000-0x0271FFFF
winp
20th February 2005, 17:08
yeah...u can try as blue life telling.
UFS-3ā
21st February 2005, 04:09
ok, i'll try it...
joeyew
22nd February 2005, 05:49
try to flashing mcu and ppm. after done direct press the format user area button and then init simlock.
minimania
6th March 2005, 08:23
change to local mode before format user area also..