With this emu you can play Duke Nukem 3d and all Doom wads, i tried Quake 2 but it didnt work, i will try Heretic and inform you :wink: EDIT: Heretic works like charm :wink:

Can you post please some Duke Nukem 3D wad's
here in the forum? Thanks!

Here are some links :wink:
Duke Nukem 3D
[Only registered and activated users can see links];//[Only registered and activated users can see links]
Heretic

[Only registered and activated users can see links];//[Only registered and activated users can see links]
Quake 2

[Only registered and activated users can see links];//[Only registered and activated users can see links]
Just rename it to doom1.wad or doom2.wad etc.
For me Quake 2 doesnt work :cry:

Quake II uses a different 3D engine..
Hexen should also work..

mirko car si!
uploadoj samo proverene :)

DUKE works fine

how about rott (rise of the triad)?
is it work?
and do you know where can it's wad be found?

Yeah it works.But no jumping:-(.Rename Quake2.wad to tnt.wad...and play :-))).Only hexen no work but maybe I have bad wad file.

I tried Quake 2 and it starts but when want to play it chrashes. :cry:

Oh YES! It is just the REVOLUTION in the
mobile GAMING!

So what about HERETIC? Does it works or not?

HERETIC works good! rename file to tnt.wad and play.Quake 2 also run ok.Hexen - no :-((

Hey wich phone you have :?: I have 6630 and Quake 2 doesnt work. Maybe you can share your Quake 2 wad :?:

on ngage quake 2 doesn't work, someone have the quake1 or half life1 wad???

I have Quake 2 from this topic.To run you must rename Quake2.wad file to "tnt.wad".And then it runs.It not tha same like PC version but very good.

hey....
what program should i use to play this game ??
can someone plz post the program ?
is it work for 6600 ??

go there: New Games For S60 2005 By Xasiotis - page 28.Instal and have a lot off fun :-)))

hey guys i have a nokia 6630 and i cant play duke nukem...but someone told me it works on n gage....can anyone try it on 6630?

I have 6630 and duke works :wink:

Duke have only 1 level :-(((((((( You can't jumb and shot up or down :-((.But this sound ...:-).

I have 6630 and duke works :wink:

yeah i renamed it to doom1.wad and it works

quake 2 works on nokia 6630...just rename it to tnt.wad

Duke have only 1 level :-(((((((( You can't jumb and shot up or down :-((.But this sound ...:-). Yea did you tried to use parameter function in C2Doom emu, try -warp x (x stands for level number) :wink:

How about ~15 wad files?

h**p://[Only registered and activated users can see links]

On 6600 quake 2 don't work even renaming the file....Solutions?

HI, PLEEZ HELP ME HOW DO I INSTALL THE NEW DOOM GAME IN MY 6630,,, HOW DO I INSTALL WAD FILES? WATS THAT? PLEEZ HELP THANKS!

I have original versions of duke3d, quake. Please tell me how to extract wad files, cause f.e. duke3d doesnt have any them.

I have installed the cdoom wich works perfect with all wad files.But i have probl with queke and duke3D.I rename the files but where have i to put them.I have 6630,the game loads but no screen just black monitor!Pls help me...

have any1 tried multiplayer? I tried it with my friend yesterday, but i didn't work - always eror after conection - have some1 another experience?

here are *.wad files avalible to download and working with c2doom. rename them to tnt.wad and place them to E:\

h**p://[Only registered and activated users can see links]

hi,i have tried quake2 and wolfenstein,herectic and doom ,works excellent,with my n-gage,original 1,,,good graphics and sound,,half life is rubbish,stops when open the door,,but vvg graphics,,

Experienced similar on half life also :-( . Still downloading others but all so far not worked on 7610 or 6680 when half life does ! Not tried rename to tnt yet but tried other rename ideas from the site and this sites other topic. We need some baseline results on what works for what phone. For me must put halflife in different locations on my phones for it to start ! Anyone else experienced this as its really annoying trying to get em working properly !

Where is this EMULATOR?? i cant find it :(

I've tried doom1, doom2, duke nukem, heretic and it's all ok.
But quake 2, renamed tnt.wad, starts, load correctly menu, but when i start a game, it crashs and c2doom close. Anyone have some suggestion to play quake 2? Thanks, my phone is N6630 v3.45.113

Got heretic halflife quake2 working so far . None of doom games :-( simpsons opens but cant start new game.Duke not open original name or tnt or doom1 or 2 :-( Still to try others. This on 7610 and 6680

Heretic, Half life, Quake, Duke and Dooms wors ok.Simpsons only sound but no option menu( -warp X not working..no map).Doom 64 and Wolf orginal loads but black window :-(.It's on 6260. Any solution??

Where is this EMULATOR??


where is it?

where put a WAD file??

thanx

I've tried doom1, doom2, duke nukem, heretic and it's all ok.
But quake 2, renamed tnt.wad, starts, load correctly menu, but when i start a game, it crashs and c2doom close. Anyone have some suggestion to play quake 2? Thanks, my phone is N6630 v3.45.113
somewhere I red, that the path have to be e:\tnt.wad - so place the file direct to e: and try again. I hope it will help

I tried some wad files on my 6600 and this is the result:


Doom1 - works- on exit error
Doom2 - works
wolfenstein3d - works
wolfenstein3d the Noctural Missions - works
heretic - works
evilution - works
The plutonia expermiment - works
Quake2 works - on exit error
dukenukem3d - works- just first level
Spear Of Destiny - works - parameter (-warp 1)
Halflife works- parameter (-warp 1) - error when exits
chex Quest 1 and 2 - works - rename to doomu.wad (thx ezzek)
twilight - works

doom64 - doesn't work - just black screen
simpsons - doesn't work - only first screen shows and music
goldeneye - doesn't work - only first screen shows and music



do not forget to rename the filename to tnt.wad or plutionia.wad or doom.wad or doomu.wad or doom2.wad

I put every wad file in a new folder. for example:
E:\doom\wolfenstein\plutonia.wad
E:\doom\Quake2\tnt.wad

if you want to change the game choose option reset wad file!

files get here :
h**p://[Only registered and activated users can see links]
(thx to member Ondrash for giving the link) (Go to page 7)
or
h**p://[Only registered and activated users can see links]
or
h**p://[Only registered and activated users can see links]
maybe
f*p://195.208.220.203/pub/rec/games/idgames/levels/

i didn't know there are so many wad files!

remove replace * with t (*=t)


well thats it have phun with it.

Ciao

hi,i play chex quest2 ,without any problem,,on old n-gage,,u must rename it to Doomu.Wad,then it works,,but halflife crash when open the first door,,can it help with other parameters,,?and golden eye,"james bond" crash when u moove,u can look round,but moove then crash,,,I have stuck in doom,in 2 level,because u cant jump,,over toxic river,,how 2 do that? i have put my wads in ..e:/system/apps/doom1_doom2_TNT_plutonia_doomu/ and when change games select reset wad file in meny,, Is there other version of c2doom, there u can jump??

files get here :
h**p://[Only registered and activated users can see links]


Ciao[/quote]
Can someone post the wad files bcs in the above is hard to find them.
I have the "older" wad files (doom,duke,queke)all together in separeted folders by using a file manager and it works!

Yes Please down
load, all Working Wads with guide how to install,,,which model of phone and so on,,,, Many Thanks to this fantastic c2doom engine,,,

Can some1 give the files in this forum? I have most of them, but now I can't, becouse now I have bad internet connection.

Could anyone help with a link to the halflife wad or point out where in the links already posted it could be found?

In my 6260 doesn't work : simpsons,doom64 and WOLF3D :-(((((((((((.I need only Wolf :-(.

Half life wad aka plutonia.wad is on page 2 this topic :-) attached a different duke nukem wad which opens to approx 10mb unlike version page2 which opens to approx 2mb. Can open to start game on my 6680 but then closes . Not tried on 7610 yet and was done by changing name to plutonia.wad . Can members post how they get on with this one and if successful what name and e\location used . Cheers. Dmoe

have somebody working halflife for n-gage,,my crashes when open the first door,;((

I get the message game saved but when i try to load there is no savde file!Whats the trick?

updated:
[Only registered and activated users can see links]

Has anyone tried to put the wad file from the original Heretic game on the emulator (about 10mb file)?
I put the original from doom2 and works fine & with sound, but with heretic it stucks.
I have the SX1 device

New release : 1.01

release note :

Support for non-official WAD files.
S60 cheat input dialog
Game shutdown bug fixes

available at: h**p://koti.mbnet.fi/mertama/

Wolf = black window :-(

emulatorThis isn't an emulator, you know....!

An emulator to run DOS Doom would be pathetically slow on the fastest phones available... :(

hi,please give the facts,of the games ,,how the games is named

heres my list

doom=doom.wad
quake2=tnt.wad
heretic=doom2.wad
wolfenstein(old one)=doom2.wad
dukenuke=doom1.wad
chexquest2=doomu.wad

these games work very good in old n-gage,,

Br Ezzek

How can I open the first doors in Half Life???
Please help!

press number 7,,,;)but my half life crash,when open the door,,;((

press number 7,,,;)but my half life crash,when open the door,,;((

i can open door and go on but it crash randomly in the next 30 secs

can some1 pls post heretic wad file.
have trouble gettin it elsewhere cuz dun understand the language of the site
thanks loads

Hello.
C2Doom to version 1.02 :-)

The cheat button changed to 'c',
audio problems are related only to ngage,
fix with cheaty dialog.

One pls can somebody post wolfenstein 3d wad file.Meybe my is wrong - no working.

PS new release: h**p://koti.mbnet.fi/mertama/

have fun :-)

who knows howto fight error xalloc_die on nok 6600? In doom.wad?

hi,please give the facts,of the games ,,how the games is named

heres my list

doom=doom.wad
quake2=tnt.wad
heretic=doom2.wad
wolfenstein(old one)=doom2.wad
dukenuke=doom1.wad
chexquest2=doomu.wad

these games work very good in old n-gage,,

Br Ezzek

Which heretic wad do you use?
The one from the official game (10mb)
Or the small one 5mb?

Ehi fman how can I play Quake 2 on 6600?I tried with renaming the wad but don't work and exit after the Quake 2 Logo? Grazie!!!!

Ehi fman how can I play Quake 2 on 6600?I tried with renaming the wad but don't work and the game exit after the Quake 2 Logo..can you help me? Grazie!!!!

Large heretic file works on my 7610/6680 when renamed to tnt.wad . Can also a2doom v.1.02 be posted on this site and not just outside links. This site should have the files and not need to go elsewhere.

Ehi fman how can I play Quake 2 on 6600?I tried with renaming the wad but don't work and the game exit after the Quake 2 Logo..can you help me? Grazie!!!!

i renamed it to tnt.wad - the quake i used size of quake2 is 18.678 kByte downloaded at -see previeus post of mine-
otherwise try adding the parameter -warp 1 or -warp 2.
Hope it works for you!

ciao

Can someone post all the working wads,in here,with description what file name they use,,to start the game,like tnt,doom doom1 plutonia and so on,,,

Attached c2doom version 1.02 so you dont have to travel for it :-) still playing with this whole doom thing. Sometimes a game will start and run perfect but other times will make phone restart or not even open . Always using name that worked before for game yet only does it work when it wants to on my 6680. Most annoying as spend more time getting it to start than actually playing ! :-( suggestions ?

i found western wad,,works very good,,from ...gp32x.de put the [Only registered and activated users can see links] front,,;)

Cheers for the link will give it a try :-)

Someone shold upload more working WAD file"s... :smile:

the doom cheat function causes the music to stop and cannot move diagonally... and the god mode cheat dun work... is this a bug?

where i can find full doom1&2 wad?

Plz when someone states that a .wad works or doesnt works on his phone,can at least says what phone he is using so we rest know and dont have2try on our mobs or ask all the time!

my 6680 keep restarting every time i try to play counter strike..

I`m getting an error W_init file not found when trying to load doom in, any ideas? Thganks

Please Use Nokia N-gage to play the c2doom ,,,,,3650 not possible ,,

is ther a version 1.02 for series 80,

I have 6600 v5.27 I ran Quake 2 using c2Doom Emulator v1.02 by renaming the file to tnt.wad and the game ran absolutely fine no errors wht so ever.

**** man i need counter strike

I have a panasonic X700. I can load the game, I enter the menu, but when i press new game I get the following error: w_getnumforname: STTMINUS not found. I have the wad file from the original doom1 game. I have only 10 mb free on my card, so I need to test only the shareware version. Any ideas? :(

i cant get this to run on my qd its saying no init files found
before i had to wipe my mmc it worked perfectly
now im confused about it

works fine on my n70 br...

Greatest!!! Cool!!!

i have installed doom game on my n70 and i dont have any sound and i dont know how to change my weapons. can someone help me ?!

kann playing pc have pc emulator thanks