nothing
10th October 2005, 12:07
Smart-clip already upgraded new version V2.16 08-10-05, smartmoto new Version V1.06.
Installation guide
SmartMoto v1.06 might require registration procedure. To avoid this, please do the following.
Before running installation of "SmartMoto v1.06, please open your already installed SmartMoto folder (disk name:\Program Files\GsmServer\SmartMoto) and copy file “SmartMoto.lic” to any of your folders. Start installation process. After completing paste your “SmartMoto.lic” file back to SmartMoto folder and start the program.
PDS zone problem description:
Handset does not turn on, gets detected in SmartMoto, full flashing does not help. Possible problems: hardware or software.
SmartMoto can not fix any hardware problem.
Software: One of few reasons could be corrupted PDS zone.
SmartMoto “Repair PDS” section
Similar to Flashing, Repair PDS will work only if the handset gets detected by SmartMoto.
“Repair PDS” option requires a constant Internet connection with Smart-Clip server. Internet settings must be the same as for Smart-Clip update.
Connect handset to PC via Smart-Clip. Launch SmartMoto v1.06, select “Smart-Clip USB port” in connection window, press “Search” phone gets detected, open section “Repair ”
Program will not define a model. It has to be selected manually from the list of models. Please make sure the model is present in the list and select it very carefully. In case if the model is not listed – do not perform “Repair PDS” procedure, otherwise it will seriously harm your phone and restore of full original backup will not be possible.
As soon as model was correctly selected – press “Repair PDS”
After successful PDS zone repair – handset will not turn on. It requires to be flashed with full _flash file. To allow program switch to flash section automatically, please tick option “Switch to “Flash” tab on success”
Section "Repair PDS" has an option “Quick model find” for fast search of the model on the list. Just enter phone model in “Quick model find” window and program will automatically find it in the list.
We strictly recommend making a full backup from the phone before performing a “Repair PDS” procedure.
Please remember.
Trying to perform a “Repair PDS” procedure with none supported for this feature model, or with wrongly selected model from the list, will seriously damage your phone & restore of full original backup will not fix it.
Enjoy new version of SmartMoto.
Please read imformation before update your smart-clip www.smart-clip.com
Installation guide
SmartMoto v1.06 might require registration procedure. To avoid this, please do the following.
Before running installation of "SmartMoto v1.06, please open your already installed SmartMoto folder (disk name:\Program Files\GsmServer\SmartMoto) and copy file “SmartMoto.lic” to any of your folders. Start installation process. After completing paste your “SmartMoto.lic” file back to SmartMoto folder and start the program.
PDS zone problem description:
Handset does not turn on, gets detected in SmartMoto, full flashing does not help. Possible problems: hardware or software.
SmartMoto can not fix any hardware problem.
Software: One of few reasons could be corrupted PDS zone.
SmartMoto “Repair PDS” section
Similar to Flashing, Repair PDS will work only if the handset gets detected by SmartMoto.
“Repair PDS” option requires a constant Internet connection with Smart-Clip server. Internet settings must be the same as for Smart-Clip update.
Connect handset to PC via Smart-Clip. Launch SmartMoto v1.06, select “Smart-Clip USB port” in connection window, press “Search” phone gets detected, open section “Repair ”
Program will not define a model. It has to be selected manually from the list of models. Please make sure the model is present in the list and select it very carefully. In case if the model is not listed – do not perform “Repair PDS” procedure, otherwise it will seriously harm your phone and restore of full original backup will not be possible.
As soon as model was correctly selected – press “Repair PDS”
After successful PDS zone repair – handset will not turn on. It requires to be flashed with full _flash file. To allow program switch to flash section automatically, please tick option “Switch to “Flash” tab on success”
Section "Repair PDS" has an option “Quick model find” for fast search of the model on the list. Just enter phone model in “Quick model find” window and program will automatically find it in the list.
We strictly recommend making a full backup from the phone before performing a “Repair PDS” procedure.
Please remember.
Trying to perform a “Repair PDS” procedure with none supported for this feature model, or with wrongly selected model from the list, will seriously damage your phone & restore of full original backup will not fix it.
Enjoy new version of SmartMoto.
Please read imformation before update your smart-clip www.smart-clip.com