hi ,, id like to knw wer im going wrong,, cuz i have a sony handycam, which took very clear shots moving & still images on tape !! i then converted it using ulead video studio 9 directly to a vcd format,, then i burnt it to vcd,,, wen i watched it again,it was all sort of hazy , not very clear ! i grade it a 5 ,,,,,,,,10 being the highest ! wer am i going wrong,,, do i have to convert it 1rst to a certain format or add a decoder or watever to have perfect clear films like it was on the tape?? plzz help??

I dont know, but try vcd help...

sorry its at vcdhelp.com

Can someone help me out here.....

Any software to convert avi files into "video Ringtones", like the phone plays a video when someone calls instead of a tone.

first record the film using a TV-tuner 2 trnsfer ur video clips to the pc or if u have a digital cam its best to use its own software to generate clips from ur cam... or if u down know what i mean, use Microsoft Windows Movie maker and u can transfer ur video clips using step by step procedure in it...

then

before recording u must set ur template or rather the settings of ur video output into either NTSC or PALSECAM setting

choose within this two

NTSC is FOR ASIAN
PALSECAM is for European and so on
------------------
NTSC 29.9 fps
PALSECAM 25.5 fps
------------------
note: dont alter both video sizes choose only between those two formats(NTSC, PAL) which will be display on video (T.V.) it depends upon ur country.

then

once you've record the film to ur pc using ulead video studio 9 it is automatically converted to mpeg which is uncompressed file...

now edit ur video and split it into 2 parts when ur recording time is longer than 1 1/2 hours this is very essential.

now when its done use NERO 6 ultra edition, it has a very nice feature that automatically creates a VCD file format and it converts any avi or mpeg files into the blank cd.

viola ur problem is done!

Rule of thumb: your source should be of higher quality than the target media. So capturing it in VCD quality then burning it with the same profile would just pixilize and haze the final encoded movie.

So if you plan of converting your videos to VCD (352x240) you should atleast capture (vhs-vidcam->avi) your movies to a higher resolution like 640x480 (for VCD/SVCD or DVD 1/4) or 480x480 (for VCD only). After that Nero or ulead could transcode to a lower profile much better.

Since assuming your just using a Software base capture card, meaning the encoding of the video capture is entirely software based (true for most tv tuner card). If your using a hardware based capture card you could straighly encode in the media you intended and have a clear final media.

do anyone have anyvideo to mobile format rm converter ?

is there any app of video editing for series 60 smart phone .. if any plz do let me know ... :)

is there any app of video editing for series 60 smart phone .. if any plz do let me know ... :)
hi
i don't think, there is not any till now....

Regards

Jawad

convince your selfs that phones are not pcs. if its dificult to edit a video on a pv itself how o you expect to do it on a phone?

I hae a sony ericsson k750i i wanted to know how to make good 3gp files for it i have tried xilsoft and imtoo i am not getting end to end it comes like a rectanglke in the middle of a screen i use resolution of 176X144 is there anything else i can do or any other software which i can use

I hae a sony ericsson k750i i wanted to know how to make good 3gp files for it i have tried xilsoft and imtoo i am not getting end to end it comes like a rectanglke in the middle of a screen i use resolution of 176X144 is there anything else i can do or any other software which i can use

try this setting in xilisoft converter.

Video Settings
LandScape
Reduce Frames: Deactivated
Codec: Xvid Encoder
Bitrate: 70kbps
Target frame rate: 15fps
Advanced Video Options: enable Loss protection.

Audio Settings
Enable - Activated
Force Mono - Activated
Frecuency: 16000 Hz
Bitrate: 16 kbps
Volume Boost: 250

try this setting in xilisoft converter.

Video Settings
LandScape
Reduce Frames: Deactivated
Codec: Xvid Encoder
Bitrate: 70kbps
Target frame rate: 15fps
Advanced Video Options: enable Loss protection.

Audio Settings
Enable - Activated
Force Mono - Activated
Frecuency: 16000 Hz
Bitrate: 16 kbps
Volume Boost: 250

hello it plays only 3gp and mp4 files and not avi so xvid files dont work please advise and the settings which u tell me is in exactly which version of xilisoft as these settings look to me of smartmovie converter

Why not use mp4 instead..coz 3gp format sacrifices quality over size. There are no settings to tweak coz its already a fixed setting.

Try Super VCD format from " Nero " , And everybody have a China made DVD player ? It play on every DVD player ........

I have a phone from china they use video clips
with extension avi file i would like ask what kind converter they are
using i use lot converter but i uplod to the phone
error please help t.y