ARM inside v1.4
Friday, 21 October 2005
MT Box SE ARM inside v1.4
Available at support area in MT-Box SE Setup v1.1.exe
Added support for: J210, J210i, J210c
Features:
Standalone software
Unlock – 2 sec
Reset user code – 1 sec
Save codes as log file
Read flash
Write flash
Read flash from–to
Write flash from–to
Read eeprom
Repair eeprom
Repair all CRC
Repair 4 locks closed
Make phone backups
Restore phone backups
Change languages
Upgrade phone software
Repair software-related problems
MicrostarGSM®
10th November 2005, 12:59
28.10.2005 - ARM inside v1.5
• Added support for J210, J210i, J210c "XARMC" flash files
• When want to select flash files for J210 need to choice file type "xarmc"
• Unlock speed 1 second
NOTE:
To able use latest update MT-box need to be updated.Mt-box update tool available for download from support site.
How to update MT-box:
- PC must have internet connection
- Set up your firewall to allow access to internet for MTtool.exe
- Connect box to USB- Start MT tool.exe
- Press "Info" button
- If your MT-box box info appears then press "Update" button
- Please wait to update finish and show you "OK"
LG 8360-eeprom_backup.rar
LG 8380-eeprom_backup.rar
LG 8330-eeprom_backup.rar
LG 8180-eeprom_backup.rar
LG 8130-eeprom_backup.rar
LG 8120-eeprom_backup.rar
LG 8110-eeprom_backup.rar
Features:
*Standalone software
*Read phone information: PID, IMEI, CID, PAF
*Read network unlock codes
*Read network lock codes
*Direct unlock network lock
*Reset user lock to default
*Save codes as log file
*Super fast flashing
*Change languages
*Upgrade phone software
*Write factory flash files
*Repair software-related problems
*Repair dead phones
*De-customize phones
*Make full phone backup
*Restore phone backup
*Read and backup flash from–to
*Write flash from–to
*Read flash
*Write flash
*Backup MCU
*Backup File System
*Backup eeprom
*Read eeprom
*Repair eeprom
*Reset eeprom
*Restore eeprom
*Repair blinking phones
*Repairing phones with completely destroyed software
*Restore MCU
8Restore File System
*Read fields from–to
*Write fields from–to
*Counter for flashed phones
*Counter for unlocked phones
Flash full flash and change language for 800 seconds only
MicrostarGSM®
1st December 2005, 14:15
12.11.2005 - New ARM inside v1.8 - K600i/K608i CID31 (CID49) supported
Features:
Read phone information
Read network codes (8 digits long)
Relock SIM-lock to any network
Direct unlock network lock (no need to enter codes manualy)
Read user lockReset user lock to default
Direct unlock user lock (no need to enter code manualy)
Save codes as log file
Super fast flashing (8MB < 2 mins)
Change languages
Upgrade phone software
Write factory flash files
Repair software-related problems
Repair dead phones
Customize phones
De-customize phones
Make phone backups
Restore phone backups
Read and backup flash from–toWrite flash from–to
Read flash
Write flash
Backup MCU
Backup File System
Backup eeprom
Read eeprom
Repair eeprom
Repair dead hones
Repair blinking phones
Repair contact-operator phones
Repairing phones with completely destroyed software
Restore MCU
Restore File System
Restore eeprom
Read fields from–toWrite fields from–to
Write OTP
Lock OTP
Full phone backup
Restore phone
Reset total call time
Empty board full solution
Write any IMEI (on empty boards)
Write CID
Auto generate and write codes to empty boards
No need to write cracked or patched files to repair 4 locks closed
No need to write cracked or patched files to repair imei
Repair all CRC - 1 sec
Repair 4 locks closed
Restore OTP IMEI – 1 sec
Repair phone to factory made
Test point pictures and dissasembling manual available on support area
MicrostarGSM®
1st December 2005, 14:16
T290/T230 boot bug fixed
MicrostarGSM®
1st December 2005, 14:18
- Added support for Plugins
- Some bugs fixed
For example you can using plugins change IMEI on Sharp 903 for 15 secondsPlease before use this plugin check it is legal/allowed in your country.
YOU DONT NEED TO FLASH THE PHONE TO CHANGE IMEIDOES NOT MATER WHAT IS THE PHONE SOFTWARE VERSION
Available plugins:
SHARP903plugin.ssw
MicrostarGSM®
1st December 2005, 14:19
- Added support for Plugins
- Some bugs fixed
For example you can using plugins change IMEI on all supported LG 3G phones for 15 secondsPlease before use this plugin check it is legal/allowed in your country.
YOU DONT NEED TO FLASH THE PHONE TO CHANGE IMEIDOES NOT MATER WHAT IS THE PHONE CID AND SOFTWARE VERSION
- Added support for Plugins
- Some bugs fixed
- Some operations are faster then before (Read/Write)
For example you can using plugins change IMEI on all supported NEW ARM inside phones for 15 secondsPlease before use this plugin check it is legal/allowed in your country.
YOU DONT NEED TO FLASH THE PHONE TO CHANGE IMEI DOES NOT MATER WHAT IS THE PHONE CID AND SOFTWARE VERSION
- Added speed selection menu
- Added Sharp 802 on phone list
- Added Sharp 802 and 902 eeprom backups to support area
- Added Sharp 802 and 902 full phone backup to support area, to enable revive dead phones
MicrostarGSM®
1st December 2005, 14:25
In the New ARM inside documents you can find:
k608i_TP_v1.jpg
k608i_TP_v2.jpg
K608i_TP_v3.jpg
K60x_Test_Point_and_disassembling_manual_v2.pdf
There is added Test Point v3 (new K608i hardware version)
Use this Test Point when TP v1 give you error or work unstable, or in the case when TP resistor has too much glue over.
Use New ARM inside v1.9 with selected K600 CID31 (CID49)
MicrostarGSM®
22nd December 2005, 21:02
16.12.2005 - NEW ARM inside v2.1
Whats new in NEW ARM inside v2.1:
- Added full support for:
W550 CID 31 by Test Point,
V600 CID 31 by Test Point,
Z520 CID 24 without Test Point
- Added IMEI change plug ins for :
W550 CID 31 by Test Point,
V600 CID 31 by Test Point,
Z520 CID 24 without Test Point
If IMEI is patched (OTP IMEI <> *#06#) and you want to flash phone, first press unlock, then upgrade phone software.
After phone upgrade you can patch IMEI again (using Plug in)
- Added New option FS (File System) explorer
Using FS explorer you can:
- Read FS files
- Write FS files
- Create new folders in FS
- Delete FS folders (bee careful)
Similarly as Windows explorerUsing FS explorer you can make full backup of FS, melody, pictures, video, wap settings, start-up screen, themes, games
All allowed files can be changed, just setup your imagination)To use this option you DON'T need to install any phone drivers, no need to spend so much time.
FS explorer manual:
Connect phone, Press ??? button, Select phone model, Extra, Show Explorer, ConnectWait to phone be ready
On the right explorer window you can see phone folders:
- Tpa- ifs
- system
- smsdata
- queue
When you click on any folder, in left window you can see all files from selected folder (like in Windows)
- Right mouse click to FOLDER and you will see available options:
New - make New folder in selected folder
Import - import files and folders from ZIP archive (use only ZIP files produced by New ARM inside)
Export - selected folder, all files and sub-folders will be packed to an ZIP file (with path)
Delete - erase selected folder (only if is empty)
- To rename selected folder need to click and hold mouse over, write new name and press Enter
- Right click to FILE and you will see available options:
Load - file from HDD write to selected phone folder
Save - save selected file to HDD
Import - import file from previously saved ZIP archive (see export folder)Export - export selected file to an ZIP archive. If ZIP archive already exist you can add selected file to it, or delete old and make new ZIP with selected file on it.
Delete - delete selected file
To rename File use same method as for Folder rename
[Only registered and activated users can see links]
Note:
You can change XML files from phone (contains some interesting settings), but you can also harm your phone FS.
Make FS backup before you start to play with it. Of course if you harm it , just import backup file and phone is functional again.
If Mounting FS cant be done just make decustomisation (flash Tab).
For example we explain how to backup sms data:
- Select desired option and press RUN button
Also you can solve many software problems without need to flash the phone.
For example Z520 camera problem (if is not Hardware problem).
If you have phone with configuration error or similar, this mean your phone folder /tpa/preset/custom is empty.
If you have this folder backup from other phone, just import it to your and problem is solved.Same problem you can solve when select proper REP file using option Repair (Flash tab)
If your phone show message "Configuration Error" write ConfigurationRepair.rep
Please note:
Using not proper REP file can make you troubles!!
To access to other software TAB you need to Disconnect and Hide Explorer.
After finish work with FS Explorer, need to click to Disconnect button and then disconnect phone from cable.
Note:
In some cases you can make sms data backup, write to other phone, but because some SE FS is not compatible your sms will be in some other folder.Same for other other things.
Other news in New ARM inside:
- Added new TP solution, connect Test Point when software tell you to, and Remove it also when software tell you.
- New flash file concept called "ALL in ONE".What this mean?When you want to change language, repair phone or upgrade phone software need to download and use only one flash file.
When you write this file, power on the phone and please wait to phone finish initialisation (Please wait message)
After this all available languages for this phone will be displayed.If you don't want to have all this languages, use explorer to delete it (TPA/preset/system/languages/
After flashing process, please reconnect battery and then power on the phone!
This is the new flashing concept files.Need to flash only one file for change languages, repair dead phone or upgrade software.
When flashing CID 31 phones you need to use TP only one time (software will ask you to connect TP)
Also available :
ConfigurationRepair.rep
Flash this file to phone with Configuration error message and that's all. Phone is alive and fully working.