Dear Users,

TEST POINTS

Test points for Motorola phones in one collection available at http://www.smart-clip.com/testpoints.php.

So, from now on, all users of Smart-Clip will be able to RESTORE, REPAIR, UNLOCK & FLASH troubled handsets of these models:

A630
C38x, C390
C65x
C975, C980
E1000
E375, E378i
E398, E1
V18x
V22x
V3
V30x, V40x, V50x, V525, V60x
V330, V535, V54x, V55x, V620
V635
V80
V975, V1050
V980

UNLOCK SOLUTION FOR BOOT 8.26 & 6.36

Also, we would like to offer to all of you an unlock solution for Motorola V3 (RAZR), Motorola C390 boot version 8.26 and Motorola C975 boot version 6.36.


Unlock procedure for V3 (RAZR) Motorola phone with testpoint (boot version 8.26)
1. Disassemble the phone.
2. Connect your phone with USB cable to PC via Smart-Clip.
3. Connect testpoint as it show on a picture.
4. Connect fully charged phone battery.
5. Launch SmartMoto, select "Smart-Clip USB port" in connection window and press "Search", "S Blank Neptune LTE" should be detected.
6. Disconnect testpoint.
7. Flash it with V3_boot_7.E.0.smf file.
8. Turn the headset on. If the phone does not turn on then flash it with R374_G_0E.40.9CR_lpXXX_full_flash.smf file (Without testpoint, "Overwrite boot area" option must be checked).
9. Turn the handset on and unlock it with Smart-Clip, simply by pressing UNLOCK button.

Unlock procedure for С975 Motorola phone with testpoint (boot version 6.36)
1. Disassemble the phone.
2. Connect your phone with USB cable (not repair one) to PC via Smart-Clip.
3. Connect testpoint as it shown on the picture
4. Connect fully charged phone battery.
5. Launch SmartMoto, select "Smart-Clip USB port" in connection window and press "Search", "S Blank Rainbow POG" should be detected.
6. Disconnect testpoint.
7. Flash it with C975_boot_5.F.1.smf file
8. Turn the handset by pressing keys * # PowerON and perform "Remove RSA" procedure
9. If the phone does not turn on then flash it with C975_R24_U_80.2F.36I_lp002C_full_flash.smf file (Without testpoint, "Overwrite boot area" option must be checked).
10. Turn the handset on and unlock it with Smart-Clip, simply by pressing UNLOCK button.

Unlock procedure for C390 Motorola phone with testpoint (boot version 8.26)
1. Disassemble the phone.
2. Connect your phone with USB cable to PC via Smart-Clip.
3. Connect testpoint as it show on a picture.
4. Connect fully charged phone battery.
5. Launch SmartMoto, select "Smart-Clip USB port" in connection window and press "Search", "S Blank Neptune LTE" should be detected.
6. Disconnect testpoint.
7. Flash it with C390_boot_7.d2.smf file.
8. Turn the handset on and unlock it with Smart-Clip, simply by pressing UNLOCK button.
If the phone doesn't power on, reflash it using full flash.

WARNING
Disconnect phone LCD when using tespoint please.
Be aware, that during unlocking procedure via testpoint, all signals go directly to the processor. So any incorrectness in connection of testpoin could seriously damage the handset.
So please follow all instructions very carefully!
Test points will only work with Smart-Clip version 2.17 and SmartMoto version 1.07 (or higher )

Smart-Clip ON!

yes ,question for you sand man,dont you think the testpoint solution thing for c975 v6.3.6 is a bit unrealistic

it's not impossible to have testpoint solution just to unlock c975.motorola is protecting their phones not to be unlocked easily that's this is the only way that some programmers can unlock phones with newer versions.let's just stick to this kind of method at least we have a solution to unlock phones.

Regards,