I've a problem using JAF doing the "CHK" function (I've bought it from Secured URL).
First of all I'd like to know which is correct status (local mode, test mode, normal mode) I've to set the mobile phone.
I'm using JAF 1.98.61 but also with another version I've the same issue, I've tried with good N95 and N73 mobile phones.
Below there are the logs about my problem:
JAF version 1.98.61
Detected PKEY: 9001FF65
Card life counter: 99.38%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Programmi\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Programmi\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Programmi\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Programmi\ODEON\JAF\Flash3\
USB Cable Driver version: 184.108.40.206
FAST PHONE detected!
APE Boot Data:
Asic ID: 17100708
Asic Mode ID: 00
Asic Public ID: BA5D2B3FFCBA7E56BC87475F62C517A2F5E9742E
ROM ID: 1DFD66132C872FD4
CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 0DE00004F0B002544EC3CE5FF08FDF1E0AC6763D
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Programmi\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
I've seen on some forum there is a modification about the resistor on the BSI line and I've changed it to 3,3K and after to 7,5K but I've the same problem. The only this that's changed is that more than the logs abowe the program continue and shows me this error:
CMT Boot Ready
Error in MSG id...
Error in cmt get id...
Thanks in advance