Right now, BB is selling this Garmin 205W at $89.99 (after Bing 15% off
around $77).

TTS can be enable with CN firmware (install China Map and use it in China).
(AT YOUR OWN RISK! Found it Online: [Only registered and activated users can see links. ])

Enabling TTS (Text-to-speech) on the 205w and the boot up logo of your unit
will change to a Chinese logo.

1. Download the following file.
[Only registered and activated users can see links. ]

Mirror:
[Only registered and activated users can see links. ]

2. Unrar the file.

3. Drag the file CHN_v270.rgn and drop to Updater.exe

4. Under Connection Setting, Select USB Device.

5. Slide and HOLD the Power Button of the Nuvi, then quickly plug in the USB
cable to connect to the computer. (Continue to hold the power button).

6. The updater.exe will detect the USB Device with your model software and
Unit ID. (Continue to hold the power button)

7. Click "Ok" on the updater to process the flashing.

8. Release the Power Button AFTER you see "LOADER" appear on the Garmin Unit.

9. Let it flash the firmware (Do Not Disconnect your Garmin unit from your
computer) till it is completed.

10. Once the update completes, let the Garmin unit boots until the nuvi
drive appears on the PC. Then disconnect the cable from the PC.

11. Verify that you have a CHN firmware installed by going to the "About"
screen. The version should be v2.70

12. Copy GUPDATE.GCD from the nuvi205W_CHN_v290 folder to the garmin folder
of your unit

13. Disconnect the USB cable and let the unit restart. It will update itself
to CHN v2.90.

14. Verify that you have CHN v2.90 installed.

15. Delete the GUPDATE.GCD from the garmin folder of your unit.

16. You have enabled TTS on your unit.

NOTE: For 205w, if you later flash your unit to US firmware, you'll not be
able to use TTS.